Owner’s Manual
FUNAI CORPORATION
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in CANADA in the event of defect in materials or workmanship as follows:
CSTL2006
DURATION :
20 INCH LCD TELEVISION
(Tilt Stand Type)
PARTS :
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of origi-
nal retail purchase. Certain parts and LCD image burn-in are not covered under this warranty.
LABOR :
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original
retail purchase.
FEATURES
LIMITS AND EXCLUSIONS :
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT
OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PROD-
UCT TO OBTAIN SERVICE UNDER THIS WARRANTY.
●
MTS/SAP Tuner
●
181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.
This warranty shall not be extended to any other person or transferee.
●
PLL Frequency Synthesized Tuning- Provides free and easy channel selection and lets
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if
service was attempted by AN UNAUTHORIZED SERVICE CENTER. This limited warranty does not apply to any
product not purchased and used in CANADA.
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does
not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not sup-
plied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication, alter-
ation, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or
damage which results from fire, flood, lightning or other acts of God.
you tune directly to any channel using the channel number buttons on the remote control.
●
●
●
Sleep Timer
Closed Caption Decoder
Auto Shut Off Function- If there is no signal input from the antenna terminal and no user
operation for 15 minutes, the TV will turn itself off automatically.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
●
●
●
●
●
V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.
Full-Function Remote Control
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN
CANADA.
On-Screen Function Display
S-VIDEO Input- Allows you to get better picture detail and clarity.
Component Input- Allows you to get superior picture detail and clarity.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE
CENTER. THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SER-
VICE CENTER.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT.
IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRS
COSTS WILL BE CHARGED.
PRECAUTIONS
●
Place your TV in a room with adequate ventilation.
●
Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.
●
Do not place your TV on soft surfaces, such as rugs or blankets.
ATTENTION :
●
Leave enough room for air to circulate around the bottom, top and back of the set.
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR
NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original
packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI
CORP. will not reimburse you for any service done by unauthorized service providers without prior written approval.
The serial number of this product may be found on the back of the TV. No others have the same
serial number as yours. You should record the number and other vital information here and retain
this book as a permanent record of your purchase to aid identification in case of theft.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please contact us at :
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
FUNAI CORPORATION
Customer Service
Tel: 1-800-242-7158
19900 Van Ness Avenue, Torrance, CA 90501
IF YOU NEED ADDITIONAL ASSISTANCE WITH SET-UP OR OPERATING AFTER
READING OWNER’S MANUAL, PLEASE CALL TOLL FREE 1-800-242-7158 OR
Printed in China
L2602CC
1EMN21878 * * * *
IMPORTANT SAFEGUARDS
antenna-discharge unit, connection to grounding elec-
trodes, and requirements for the grounding electrode.
(Fig. A)
a. When the power supply cord or plug is damaged or
frayed.
b. If liquid has been spilled, or objects have fallen into
the TV.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI-
ANCE TO RAIN OR MOISTURE.
14. LIGHTNING - For added protection for this TV receiv-
er during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable system.
This will prevent damage to the TV due to lightning and
power-line surges.
15. POWER LINES - An outside antenna system should
not be located in the vicinity of overhead power lines or
other electric light of power circuits, or where it can fall
into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to
keep from touching such power lines or circuits as con-
tact with them might be fatal.
16. OVERLOADING - Do not overload wall outlets and
extension cords as this can result in a risk of fire or
electric shock.
17. OBJECT AND LIQUID ENTRY - Never push objects
of any kind into this TV through openings as they may
touch dangerous voltage points or short out parts that
could result in a fire or electric shock. Never spill liquid
of any kind on the TV.
c. If the TV has been exposed to rain or water.
d. If the TV does not operate normally by following the
operating instructions. Adjust only those controls that
are covered by the operating instructions, as improper
adjustment of other controls may result in damage and
will often require extensive work by a qualified techni-
cian to restore the TV to its normal operation.
e. If the TV has been dropped or damaged in any way.
f. When the TV exhibits a distinct change in performance,
this indicates a need for service.
20. REPLACEMENT PARTS - When replacement parts
are required, be sure the service technician uses
replacement parts specified by the manufacturer that
have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock, injury to persons or other hazards.
21. SAFETY CHECK - Upon completion of any service
or repairs to this TV, ask the service technician to per-
form routine safety checks to determine that the TV is
in proper operating condition.
22. HEAT - This TV product should be situated away from
heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
THIS SYMBOL INDICATES THAT
CAUTION
DANGEROUS VOLTAGE CONSTITUT-
ING A RISK OF ELECTRIC SHOCK IS
PRESENT WITHIN THIS UNIT.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THIS SYMBOL INDICATES THAT
CAUTION: TO REDUCE THE RISK OF ELECTRIC
THERE ARE IMPORTANT OPERAT-
ING AND MAINTENANCE INSTRUC-
TIONS IN THE LITERATURE
SHOCK, DO NOT REMOVE COVER (OR BACK) NO
USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
ACCOMPANYING THE APPLIANCE.
The important note is located on the rear of the cabinet.
1. READ INSTRUCTIONS - All the safety and operat-
ing instructions should be read before the appliance is
operated.
2. RETAIN INSTRUCTIONS - The safety and operat-
ing instructions should be retained for future reference.
3. HEED WARNINGS - All warnings on the appliance
and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS - All operating and use
instructions should be followed.
9. VENTILATION - Slots and openings in the cabinet
and the back or bottom are provided for ventilation and
to ensure reliable operation of the TV and to protect it
from overheating, these openings must not be blocked
or covered. The openings should never be blocked by
placing the TV on a bed, sofa, rug, or other similar sur-
face. This TV should never be placed near or over a
radiator or heat register. This TV should not be placed in
a built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instructions have been adhered to.
10. POWER SOURCES - This TV should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of power
supply to your home, consult your appliance dealer or
local power company. For TVs intended to operate from
battery power, or other sources, refer to the operating
instructions.
11. GROUNDING OR POLARIZATION - This TV is
equipped with a polarized alternating-current line plug
(a plug having one blade wider than the other). This
plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
18. SERVICING - Do not attempt to service this TV
yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
19. DAMAGE REQUIRING SERVICE - Unplug this
TV from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
5. CLEANING - Unplug TV from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupt-
ed service and, that for some specific reason, such as
the possibility of the loss of an authorization code for a
CATV converter, is not intended to be unplugged by the
user for cleaning or any other purpose, may exclude the
reference to unplugging the appliance in the cleaning
description otherwise required in item 5.
6. ATTACHMENTS - Do not use attachments not rec-
ommended by the TV manufacturer as they may cause
hazards.
FIGURE A
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
7. WATER AND MOISTURE - Do not use this TV near
water, for example, near a bath tub, wash bowl, kitchen
sink, or laundry tub, in a wet basement, or near a
swimming pool, and the like.
FCC WARNING - This equipment may
generate or use radio frequency energy.
Changes or modifications to this equip-
ment may cause harmful interference
GROUND
CLAMP
PORTABLE CART WARNING
8. ACCESSORIES - Do not place this
ANTENNA
DISCHARGE UNIT
unless the modifications are expressly
approved in the manual. The user could
lose the authority to operate this equip-
ment if an unauthorized change or
modification is made.
TV on an unstable cart, stand, tripod,
bracket, or table. The TV may fall,
causing serious injury to someone, and
serious damage to the appliance. Use
only with a cart, stand, tripod, bracket,
or table recommended by the manufac-
12. POWER-CORD PROTECTION - Power-supply
cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against
them, paying particular attention to cords at plugs, con-
venience receptacles, and the point where they exit
from the appliance.
13. OUTDOOR ANTENNA GROUNDING - If an outside
antenna or cable system is connected to the TV, be sure
the antenna or cable system is grounded so as to provide
some protection against voltage surges and built-up stat-
ic charges. Article 810 of the National Electrical Code,
ANSI/NFPA No. 70, provides information with respect
to proper grounding of the mast and supporting struc-
ture, grounding of the lead-in wire to an antenna dis-
charge unit, size of grounding conductors, location of
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
S3126A
GROUND CLAMPS
NEC
-
NATIONAL ELECTRICAL CODE
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
turer, or sold with the TV.
Any mounting of the appliance should follow the manu-
facturer’s instructions and should use a mounting acces-
sory recommended by the manufacturer. An appliance
and cart combination should be moved with care. Quick
stops, excessive force, and uneven surfaces may cause
the appliance and cart combination to overturn.
S2898A
Note to CATV system installer:
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be con-
nected to the grounding system of the building as close to the point of cable entry as practical.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS (Continued)
BRIGHTNESS
Adjust until the darkest parts of the picture are
as bright as you prefer.
[-] : decrease brightness
[+] : increase brightness
Note:
CHANNEL SETTING
●
The display will disappear automatically
after 10 seconds unless you press any but-
tons.
[AUTO PRESET CHANNELS]
[ADDING/DELETING CHANNELS]
Channel presetting is necessary at the start or
in case you moved the TV to a different area.
This feature automatically scans and memo-
rizes all available channels in your area and
lets you easily select with [CH ▲/▼].
You can add channels that was not memorized
by AUTO PRESET CH due to the bad recep-
tion status and also delete channels you no
longer receive or seldom watch.
CONTRAST
Adjust to increase or decrease contrast.
[-] : decrease contrast
1
Select “CHANNEL SET UP”
[+] : increase contrast
1
Select “CHANNEL SET UP”
- TV SET UP -
MENU
COLOR
Adjust to be brilliant or pale color.
[-] : be pale color
TINT
Adjust to obtain natural skin tones.
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
MENU
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
CAPTION
[ENGLISH]
[+] : be brilliant color
[OFF]
LANGUAGE
CAPTION
[ENGLISH]
CH
o
CH
TV SOUND
[MAIN]
[OFF]
BACK LIGHT [BRIGHT]
SLEEP
TV SOUND
[MAIN]
o
[0] MINUTE
BACK LIGHT [BRIGHT]
SLEEP
[0] MINUTE
p
p
[-] : add red
[+] : add green
SHARPNESS
Adjust the detail of the picture.
[-] : less clear
VOL
m
VOL
m
[+] : more clearer
Select “AUTO PRESET CH”
2
2
Select “ADD/DELETE CH”
CH
- CHANNEL SET UP -
ADD/DELETE CH (TV)
AUTO PRESET CH
BACK LIGHT SETTING
o
p
- CHANNEL SET UP -
ADD/DELETE CH (TV)
AUTO PRESET CH
VOL
m
1
2
Select “BACK LIGHT”
Select the desired brightness mode
- TV SET UP -
VOL
m
MENU
VOL
m
PICTURE
CHANNEL SET UP
V-CHIP SET UP
n
LANGUAGE
CAPTION
[ENGLISH]
[OFF]
The tuner scans and memorizes all
available channels in your area.
3
4
Select the channel you wish
TV SOUND
[MAIN]
CH
o
[BRIGHT]
[NORMAL]
[DARK]
BACK LIGHT [BRIGHT]
SLEEP
1
4
7
2
5
8
0
3
[0] MINUTE
CH
o
6
When the scanning is completed, the
lowest memorized channel appears on
the TV screen.
3
p
or
9
3
To exit the menu
p
+100
MENU
Notes:
Add or delete the channel
●
The TV distinguishes between standard TV
channels and cable (CATV) channels.
The TV may recognize CATV channels as
TV channels if reception condition is poor.
If this happens, check the antenna
connections and try steps 2 to 3 again when
reception conditions are better.
If there is no TV
15
VOL
m
●
CLOSED CAPTION
ADD/DELETE
n
You may view specially labeled (cc) TV
programs, movies, news and prerecorded
tapes, etc. with either a dialogue caption or
text display added to the program.
2
Select the desired caption mode
VOL
m
n
Add: light blue
Delete: light red
●
signal input, “NO TV
SIGNAL” will appear
NO TV SIGNAL
1
Select “CAPTION”
[OFF]
[CAPTION1]
[CAPTION2]
5
To exit the menu
on the display after the
completion of channel
scanning.
- TV SET UP -
MENU
MENU
PICTURE
CHANNEL SET UP
V-CHIP SET UP
[TEXT2]
[TEXT1]
LANGUAGE
CAPTION
[ENGLISH]
[OFF]
CH
o
SLEEP TIMER SETTING
TV SOUND
[MAIN]
3
To exit the menu
BACK LIGHT [BRIGHT]
SLEEP
[0] MINUTE
Notes:
1
MENU
p
Select “SLEEP”
●
When you disconnect the unit from the AC
outlet or when you have a power failure, the
sleep time will be lost.
- TV SET UP -
MENU
PICTURE
CHANNEL SET UP
V-CHIP SET UP
[CAPTION MODE (CAPTION1, CAPTION2)]
CAPTION1
displays standard closed captions (what a
character is saying).
CAPTION2
displays foreign language closed captions
(foreign language words showing what a
character is saying).
There are three ways of displaying
according to programs:
Paint-on mode: Displays input characters
on the screen immediately.
Pop-on mode : Once characters are stored
in memory, they are
[TEXT MODE (TEXT1, TEXT2)]
TEXT1 and TEXT2
display half-screen text
by scrolling (such as a
channel guide, schedule
or announcement).
●
To cancel the sleep timer,
LANGUAGE
CAPTION
[ENGLISH]
[OFF]
●
●
press [SLEEP] repeatedly
CH
o
TV SOUND
[MAIN]
BACK LIGHT [BRIGHT]
SLEEP
until “SLEEP 0 MINUTE”
[0] MINUTE
is displayed.
p
●
●
●
The Sleep Timer Setting
SLEEP 10 MINUTE
display will disappear
VOL
m
automatically after 10 seconds of the operation.
You can also set the Sleep Timer by press-
ing [SLEEP] repeatedly.
Notes:
●
• The time increases by 10
minutes up to 90.
●
If closed captioning is not broadcasted, you
cannot receive it and nothing is displayed.
When your TV receives a special effects
playback signal (i.e., Search, Slow and Still)
from a VCR’s video output channel (CH3 or
CH4), the TV may not display the correct
caption or text.
Captions and texts may not match the TV
voice exactly.
Interference may cause the closed caption
system not to function properly.
The caption or text characters will not be
displayed while the menu display or
functions display is shown.
If a black box appears on the screen, this
means that the TV is set to TEXT mode. To
clear screen, select [CAPTION1],
[CAPTION2] or [OFF].
n
●
(
)
MULTI-CHANNEL TELEVISION SOUND MTS SYSTEM
Menu
1
2
Select “TV SOUND”
Selection
MAIN
MONO
SAP*
Type of
broadcast
- TV SET UP -
displayed all at once.
MENU
PICTURE
CHANNEL SET UP
V-CHIP SET UP
●
●
●
Roll-up mode : Displays the characters
-None-
-None-
MONO
MAIN
-None-
Regular
continuously by scrolling
(max. 4 lines).
LANGUAGE
CAPTION
[ENGLISH]
Stereo
broadcast
STEREO
STEREO
[OFF]
CH
o
TV SOUND
[MAIN]
BACK LIGHT [BRIGHT]
SLEEP
MAIN
SAP
SAP
[0] MINUTE
p
*Second Audio Program (SAP) :
Your program can also be received in a
second language or sometimes a radio
station.
VOL
Select the desired sound
mode
●
m
n
[MAIN]
[MONO]
[SAP]
Note:
●
If you select [SAP] when second audio is
not available, the TV will receive normal
audio.
3
1
To exit the menu
MENU
OPTIONAL SETTINGS
LANGUAGE SELECTION
PICTURE ADJUSTMENT
1
2
Select “LANGUAGE”
Select the desired language
2
Select “PICTURE”
Select an item to adjust
- TV SET UP -
VOL
m
CH
o
- TV SET UP -
MENU
PICTURE
CHANNEL SET UP
V-CHIP SET UP
MENU
PICTURE
CHANNEL SET UP
V-CHIP SET UP
n
p
LANGUAGE
CAPTION
[ENGLISH]
LANGUAGE
CAPTION
[ENGLISH]
[OFF]
[OFF]
TV SOUND
[MAIN]
[BRIGHTNESS]
[CONTRAST]
[COLOR]
CH
o
[ENGLISH]
[ESPAÑOL]
TV SOUND
[MAIN]
BACK LIGHT [BRIGHT]
SLEEP
VOL
m
BACK LIGHT [BRIGHT]
SLEEP
[0] MINUTE
[0] MINUTE
p
[FRANÇAIS]
[SHARPNESS]
[TINT]
3
To exit the menu
3
Adjust the setting
MENU
VOL
m
...
...
+
BRIGHTNESS
+
-
n
–
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTIONAL SETTINGS (Continued)
V-CHIP SET UP
6
Set to [BLOCK] or [VIEW]
To exit the menu
This enables parents to prevent their children
from watching inappropriate material on TV.
[TV RATING SET UP]
MENU
A
TV-PG
[BLOCK]
VOL
m
B
D
L
S
V
[VIEW]
4
Select a rating
●
The limitation is not available for news,
sports programs, unedited movies on premi-
um cable channels and Emergency
[BLOCK]
[BLOCK]
[BLOCK]
Notes (for TV RATING and MPAA
RATING):
You cannot access the setup menu when the
B
TV-Y
TV-Y7 (
TV-G
TV-PG(
TV-14 (
TV-MA(
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
CH
o
)
●
)
)
)
Broadcast System signals.
“PROTECTED PROGRAM by ...” message
appears. Move to an unblocked channel
before you press [MENU].
p
●
●
When you try to access to a program which is
blocked, “PROTECTED PROGRAM by ...”
message appears on the TV screen.
Programming may be rated by the Motion
Picture Association of America (MPAA) or
according to the Television Parental
Guidelines. In order to block any inappro-
priate programming, set your limits in both
MPAA RATING and TV RATING.
<Selection> <Rating Category Explanations>
• TV-Y7
FV :
Fantasy Violence
• TV-PG / TV-14 / TV-MA :
●
When you select a rating and set it to
<Selection> <Rating Category Explanations>
• TV-Y : Appropriate for all children
• TV-Y7 : Appropriate for children 7 and
older
[BLOCK], the higher ratings will be
blocked automatically. The lower ratings
will be available for viewing.
When you set “X” or “TV-MA” to [VIEW],
all ratings turn to [VIEW] automatically.
D :
Suggestive Dialogue
(TV-PG, TV-14 only)
Coarse Language
Sexual Situation
Violence
L :
S :
V :
• TV-G : General Audience
• TV-PG : Parental Guidance suggested
• TV-14 : Unsuitable for children under
14
●
[CHANGING THE ACCESS CODE]
C
1
Select “V-CHIP SET UP”
• TV-MA : Mature audience only
6
To exit the menu
- TV SET UP -
4
Enter 4-digit code
MENU
MENU
PICTURE
1
4
7
2
5
8
0
3
5-1
CHANNEL SET UP
V-CHIP SET UP
* Rating with no sub categories
Set to [BLOCK] or [VIEW]
NEW CODE
LANGUAGE
CAPTION
[ENGLISH]
[OFF]
[[[[
6
CH
TV SOUND
[MAIN]
[MPAA RATING SET UP]
B
CONFIRM CODE
BACK LIGHT [BRIGHT]
SLEEP
9
o
_ _ _ _
[0] MINUTE
TV-Y
[VIEW]
[VIEW]
[BLOCK]
[BLOCK]
[BLOCK]
4
Select a rating
TV-Y7 (
TV-G
TV-PG(DLSV)
TV-14 (DLSV)
TV-MA( LSV)
)
p
+100
VOL
m
B
B
G
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
CH
o
PG
PG-13
R
NC-17
X
5
To exit the menu
[BLOCK]
VOL
m
MENU
p
2
3
Enter 4-digit code
5-2
* Rating with sub categories
Notes:
5
1
4
7
2
5
8
0
3
Set to [BLOCK] or [VIEW]
ACCESS CODE
●
Make sure you enter exactly the same new
code as the “CONFIRM CODE”. If they are
different, the “NEW CODE” space is
cleared for redoing.
VOL
_ _ _ _
6
VOL
m
G
PG
PG-13
R
[VIEW]
[VIEW]
[VIEW]
[BLOCK]
[BLOCK]
[BLOCK]
TV-Y
TV-Y7 (
TV-G
TV-PG(
TV-14 (
TV-MA(
[VIEW]
m
)
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
9
B
2 times
B
)
)
)
NC-17
X
repeatedly
+100
●
Your personal access code will be erased
and will return to the default (0000) when a
power failure occurs or when you turn off
the power using a wall switch. If you have
forgotten the code, unplug the power cord
for 10 seconds to restore the access code to
0000.
If you have not set up your personal access
code, enter 0000 (default access code).
Sub categories
<Selection> <Rating Category Explanations>
• G :
General Audience
Select a rating
Select a feature to set up
• PG :
Parental Guidance suggested
CH
CH
TV-PG
[BLOCK]
• PG-13 : Unsuitable for children under
13
• R :
- V-CHIP SET UP -
o
p
A
B
C
o
B
D
L
[BLOCK]
[BLOCK]
[BLOCK]
[BLOCK]
TV RATING
MPAA RATING
CHANGE CODE
Restricted; under 17 requires
accompanying parent or adult
guardian
p
S
V
VOL
m
• NC-17 : No one under 17 admitted
• X : Mature audience only
TROUBLESHOOTING GUIDE
MAINTENANCE
Sometimes a performance problem can be easily solved by checking seemingly apparent but often over-
looked possibilities. Before arranging for service, check these items. It could save your time and money.
QUICK SERVICE CHECK LIST
CABINET CLEANING
PICTURE SCREEN CLEANING
●
Wipe the front panel and other exterior
If the liquid crystal display panel should
require cleaning, wipe it with a cotton or soft
cloth. Before cleaning the picture screen,
disconnect the power cord.
surfaces of the TV with a soft cloth
Possible Remedy
Problem
immersed in lukewarm water and wrung dry.
Never use a solvent or alcohol. Do not spray
1 ····Try a new channel, if OK, then possible station
trouble.
2 ····Is TV plugged in?
Power at outlet?
Remote Control Doesn’t Work
2, 10, 12, 13
5, 6
●
Bars on Screen
insecticide liquid near the TV. Such
chemicals may cause damage and
discoloration to the exposed surfaces.
Picture Distorted
1, 5
3 ····Is TV’s power on?
4 ····Is antenna or cable connected to terminal on the
back of the set?
5 ····If outside antenna is being used, check for broken
wire or loose connection.
6 ····Check for local interference.
7 ····Turn off the TV and then turn it on after about a
minute.
8 ····Adjust COLOR control.
9 ····Adjust CONTRAST & BRIGHT control.
10····Check batteries in remote control.
11····Move the TV away from the nearby appliances which
generate a magnetic field.
Picture Rolls Vertically
No Color
1, 5, 6
1, 4, 5, 8
1, 4, 5, 6
1, 4, 5, 9
1, 5, 6
SUPPLIED ACCESSORIES
●
●
●
Owner’s Manual
(1EMN21878)
Remote control unit
(NE900UD)
Batteries
(“AAA” x 2)
Poor Reception on Some Channels
Weak Picture
Lines or Streaks in Picture
Ghosts in Picture
SPECIFICATIONS
1, 4, 5, 6
1, 5
GENERAL SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
Picture Blurred
Television system:
NTSC-M
TV Standard
Sound output:
1W, 8 ohm x 2
Sound OK, Picture Poor
Picture OK, Sound Poor
No Picture or Sound
1, 4, 5, 6, 9
1, 6
Turn off using [POWER], then turn it on again 30
minutes later or so.
12····Check if there is an obstacle between the sensor and
the remote control.
Closed Caption
System:
Channel coverage
VHF:
§15.119/FCC
OTHER SPECIFICATIONS
Remote control:
Digital encoded
1, 2, 3, 4, 5, 7
1, 11
2 ~ 13
14 ~ 69
infrared light system
13····Test the signal output.* If OK, then possible
UHF:
CATV:
Different Color Marks on Screen
remote sensor trouble.
Operating
temperature:
2 ~ 13, A ~ W,
W+1 ~ W+84,
A-5 ~ A-1, 5A
181 channels
frequency synthesized
tuning system
Direct access keyboard,
programmable
scan and up/down
*Additional Remote Test
5°C to 40°C
(41°F~104°F)
Tune an AM radio to a station with no broadcasting. Press a button on the remote control toward the radio. Sound will be
fluttering when you press any key and the radio receives the signal. This means the remote control unit is working.
Power requirements: AC120V, 60Hz
Power consumption
Tuning System:
Channel access:
Closed Caption Problem
Possible Remedy
Misspelled captions are shown.
Spelling errors may pass through uncorrected by the closed caption-
ing production company in a live broadcast.
(Maximum):
LCD:
53W
20"
Dimensions (H x W x D):
With Tilt Stand
19" x 24-7/16" x 10-5/8"
(483mm x 620mm x 269mm)
Weight:
Captions that are delayed a few seconds behind the actual dialogue
are common for live broadcasts. Most captioning production compa-
nies can display a dialogue to a maximum of 220 words per minute.
If a dialogue exceeds that rate, selective editing is used to insure that
the captions remain up-to-date with the current TV screen dialogue.
Text is not shown in its entirety
or there is a delay of what is being said.
Terminals
Antenna input:
VHF/UHF/CATV
75 ohm unbalanced
(F-type)
Captions are scrambled with white boxes
on the TV screen.
Interference caused by building, power lines, thunderstorms, etc.
may cause scrambled or incomplete captions to appear.
With Tilt Stand: 15.4 lbs. (7.0kg)
S-Video input:
Video input:
Audio input:
Mini DIN 4-pin jack
RCA connector x 1
RCA connector x 4
No captions are displayed in a program
which must contain closed caption.
Broadcasters may use a time compression process to the actual pro-
gram so that additional advertising time can be given. In this case,
captions will be lost since the decoder cannot read the compressed
information.
•Designs and specifications are subject to
change without notice and without our
legal obligation.
•If there is a discrepancy between languages,
the default language will be English.
Component video input:
One pin jack (Y), 1Vpp(75 ohm)
Two pin jacks (Pr)/(Pb), 700mVpp(75 ohm)
No captions are displayed when playing a
prerecorded videotape with closed caption.
The videotape may be either an illegal copy or the tape duplicating
company may accidentally have left out the captioning signals dur-
ing the copying process.
Headphone:
Stereo Sound System
2 speakers
1/8" stereo (3.5mm)
The TV screen shows a black box.
You are in TEXT mode. Select [CAPTION1], [CAPTION2] or
[OFF].
2 ways AV input
The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active
pixels may appear as a fixed point of blue, green or red. This is not to be considered a defect in the
LCD screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
|