FUNAI DVD Recorder WV10D6 User Manual
Owner’s Manual  
Recordable disc  
• We strongly recommend for good recording quality:  
TDK DVD+R 4x/8x/16x, SONY DVD+R 4x/8x/16x, MAXELL DVD+R 4x/8x/16x, SONY DVD+RW 4x,  
MAXELL DVD-R 8x/16x, MAXELL DVD-RW 4x  
• Discs that have been tested and are proven to be compatible with this recorder:  
VERBATIM DVD+R 8x, VERBATIM DVD+RW 4x, VERBATIM DVD-R 8x, VERBATIM DVD-RW 2x, MAXELL DVD-R 16x, JVC DVD-RW 4x  
DVD Recorder  
WV10D6  
INSTRUCCIONES EN ESPAÑOL INCLUIDAS  
Please read before using this equipment.  
If you need additional operating assistance after reading this owner’s manual or  
to order replacement accessories, please call  
TOLL FREE : 1-800-518-1180  
or visit our web site at http://www.funai-corp.com  
Connection to a TV (Before you use this unit, you need to complete connections.)  
If your TV has AUDIO/VIDEO input jacks, see the section “Connections” on pages 13–15. If not, it is still possible to  
connect this unit to your TV by using a STEREO AUDIO/VIDEO RF modulator (commercially available). In this case,  
follow the instructions below.  
1) The antenna input jack of your TV may have been already occupied. If so, disconnect the RF cable from your TV, and then  
connect the RF cable to the ANTENNA IN jack of this unit.  
2) Connect the ANTENNA OUT jack of this unit to your RF modulator (usually marked “ANT IN”) by the RF cable.  
3) Connect your RF modulator to your TV by another RF cable.  
4) Connect the AUDIO/VIDEO output jacks of this unit to the AUDIO/VIDEO input jacks of your RF modulator by audio and video cables.  
5) Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your  
RF modulator has a Modulator/Antenna switch, set it according to your RF modulator’s manual.  
6) Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to.  
For more details, follow the instructions supplied with the RF modulator.  
Antenna  
(Back of This Unit)  
Cable  
TV signal  
COMPONENT  
VIDEO IN  
VIDEO OUTPUT  
VIDEO
4
IN  
S-VIDEO  
Y
6
or  
IN  
L
OUT  
L
Audio/Video cables  
(supplied)  
OUT  
P
B/CB  
R/CR  
R
R
Turn on your TV  
and select channel  
3 or 4.  
P
ANTENNA AUDIO IN  
(E1)  
AUDIO OUT  
2
5
RF cable  
(Back of TV)  
Set channel 3 or 4.  
(supplied)  
1
AC 120V ANT IN CHANNEL TO TV  
AUDIO IN VIDEO IN  
3
4
R
L
Note  
• The quality of  
picture may  
Antenna in jack  
STEREO AUDIO/VIDEO  
RF Modulator  
(commercially available)  
become poor if this  
unit is connected to  
an RF modulator.  
RF cable  
3 (commercially available)  
To record a program easily, refer to “Easy DVD recording” on pages 16-17 after connections are completed.  
(You CANNOT record on any copyright protected DVD disc with this unit.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
Precautions (cont’d)  
IMPORTANT SAFEGUARDS  
1. Read Instructions - All the safety and operating  
instructions should be read before the appliance is  
operated.  
NFPA No. 70, provides information with regard to proper  
grounding of the mast and supporting structure, grounding  
of the lead-in wire to an antenna discharge unit, size of  
grounding conductors, location of antenna-discharge unit,  
connection to grounding electrodes, and requirements for  
the grounding electrode. (Fig. A)  
2. Retain Instructions- The safety and operating instructions  
should be retained for future reference.  
3. Heed Warnings - All warnings on the appliance and in the  
operating instructions should be adhered to.  
4. Follow Instructions - All operating and use instructions  
should be followed.  
5. Cleaning - Unplug this product from the wall outlet before  
cleaning. Do not use liquid cleaners or aerosol cleaners.  
Use a damp cloth for cleaning.  
EXCEPTION: A product that is meant for uninterrupted  
service and, that for some specific reason, such as the  
possibility of the loss of an authorization code for a CATV  
converter, is not intended to be unplugged by the user for  
cleaning or any other purpose, may exclude the reference  
to unplugging the appliance in the cleaning description  
otherwise required in item 5.  
FIGURE A  
ANTENNA  
LEAD  
WIRE  
EXAMPLE OF ANTENNA GROUNDING  
AS PER NATIONAL ELECTRICAL CODE  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMP  
NEC – NATIONAL ELECTRICAL CODE  
S2898A  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
6. Attachments - Do not use attachments not recommended  
by the product manufacturer as they may cause hazards.  
7. Water and Moisture- Do not use this product near water,  
for example, near a bath tub, wash bowl, kitchen sink, or  
laundry tub, in a wet basement, or near a swimming pool,  
and the like.  
14. Lightning - For added protection for this product during a  
lightning storm, or when it is left unattended and unused  
for long periods of time, unplug it from the wall outlet and  
disconnect the antenna or cable system. This will prevent  
damage to the product due to lightning and power-line  
surges.  
15. Power Lines - An outside antenna system should not be  
located in the vicinity of overhead power lines or other  
electric light or power circuits, or where it can fall into  
such power lines or circuits. When installing an outside  
antenna system, extreme care should be taken to keep  
from touching such power lines or circuits as contact with  
them might be fatal.  
16. Overloading - Do not overload wall outlets and extension  
cords as this can result in a risk of fire or electric shock.  
17. Object and Liquid Entry - Never push objects of any kind  
into this product through any openings as they may touch  
dangerous voltage points or short-out parts that could  
result in a fire or electric shock. Never spill liquid of any  
kind on the product.  
8. Accessories - Do not place this product on an unstable  
cart, stand, tripod, bracket, or table. The product may  
fall, causing serious injury to a child or adult, and  
serious damage to the appliance. Use only with a cart,  
stand, tripod, bracket, or table recommended by the  
manufacturer, or sold with the product. Any mounting  
of the appliance should follow the  
manufacturer's instructions and  
should use a mounting accessory  
recommended by the manufacturer. An  
appliance and cart combination should  
be moved with care. Quick stops,  
excessive force, and uneven surfaces  
may cause the appliance and cart  
combination to overturn.  
9. Ventilation - Slots and openings in the cabinet are  
provided for ventilation and to ensure reliable operation  
of the product and to protect it from overheating, and  
these openings must not be blocked or covered. The  
openings should never be blocked by placing the product  
on a bed, sofa, rug, or other similar surface. This product  
should not be placed in a built-in installation such as a  
bookcase or rack unless proper ventilation is provided or  
the manufacturer's instructions have been adhered to.  
10. Power Sources - This product should be operated only  
from the type of power source indicated on the marking  
label. If you are not sure of the type of power supply  
to your home, consult your appliance dealer or local  
power company. For products intended to operate from  
battery power, or other sources, refer to the operating  
instructions.  
11. Grounding or Polarization - This product is equipped with  
a polarized alternating-current line plug (a plug having  
one blade wider than the other). This plug will fit into the  
power outlet only one way. This is a safety feature. If  
you are unable to insert the plug fully into the outlet, try  
reversing the plug. If the plug should still fail to fit, contact  
your electrician to replace your obsolete outlet. Do not  
defeat the safety purpose of the polarized plug.  
12. Power Cord Protection - Power supply cords should  
be routed so that they are not likely to be walked on or  
pinched by items placed upon or against them, paying  
particular attention to cords at plugs, convenience  
receptacles, and the point where they exit from the  
appliance.  
18. Servicing - Do not attempt to service this product yourself  
as opening or removing covers may expose you to  
dangerous voltage or other hazards. Refer all servicing to  
qualified service personnel.  
19. Damage Requiring Service - Unplug this product from  
the wall outlet and refer servicing to qualified service  
personnel under the following conditions:  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the  
product.  
c. If the product has been exposed to rain or water.  
d. If the product does not operate normally by following the  
operating instructions. Adjust only those controls that  
are covered by the operating instructions as an improper  
adjustment of other controls may result in damage and  
will often require extensive work by a qualified technician  
to restore the product to its normal operation.  
e. If the product has been dropped or damaged in any way.  
f. When the product exhibits a distinct change in  
performance this indicates a need for service.  
20. Replacement Parts - When replacement parts are  
required, be sure the service technician has used  
replacement parts specified by the manufacturer or have  
the same characteristics as the original part. Unauthorized  
substitutions may result in fire, electric shock or other  
hazards.  
21. Safety Check - Upon completion of any service or repairs  
to this product, ask the service technician to perform  
safety checks to determine that the product is in proper  
operating condition.  
13. Outdoor Antenna Grounding - If an outside antenna or  
cable system is connected to the product, be sure the  
antenna or cable system is grounded so as to provide  
some protection against voltage surges and built-up static  
charges. Article 810 of the National Electrical Code, ANSI/  
22. Heat - This product should be situated away from heat  
sources such as radiators, heat registers, stoves, or other  
products (including amplifiers) that produce heat.  
EN  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
Precautions (cont’d)  
Installation Location  
For safety and optimum performance of this unit:  
• Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit.  
Do not place the unit directly on top of the TV.  
• Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or  
humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block  
the ventilation holes on the sides of the unit. Avoid locations subject to strong vibration or strong  
magnetic fields.  
Avoid the Hazards of Electrical Shock and Fire  
• Do not handle the power cord with wet hands.  
• Do not pull on the power cord when disconnecting it from AC wall outlet. Grasp it by the plug.  
• If, by accident, water is spilled on this unit, unplug the power cord immediately and take the unit to  
our Authorized Service Center for servicing.  
Moisture Condensation Warning  
Moisture condensation may occur inside the unit when it is moved from a cold place to a warm  
place or after heating a cold room or under conditions of high humidity. Do not use this unit at least  
for 2 hours until its inside gets dry.  
About Copyright  
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.  
This product incorporates copyright protection technology that is protected by U.S. patents and  
other intellectual property rights. Use of this copyright protection technology must be authorized  
by Macrovision, and is intended for home and other limited viewing uses only unless otherwise  
authorized by Macrovision. Reverse engineering or disassembly is prohibited.  
Notice for progressive scan output  
Consumers should note that not all high definition television sets are fully compatible with this  
product and may cause artifacts to be displayed in the picture. In case of picture problems with 525  
progressive scan output, it is recommended that the user switch the connection to the ‘standard  
definition’ output. If there are questions regarding your TV set compatibility with this 525p DVD  
recorder, please contact our customer service center.  
Supplied Accessory  
• Remote control  
(NB086UD) with  
two AA batteries  
• RF cable  
WPZ0901TM002  
• Audio/Video cables • Owner’s Manual  
• Quick Guide  
(1VMN23109)  
(
)
(WPZ0102TM015  
(1VMN23108)  
or WPZ0102LTE01)  
Owner's Manual  
EN  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
Precautions (cont’d)  
Maintenance  
SERVICING  
• Please refer to relevant topics on “Troubleshooting” on pages 71-74 before returning the product.  
• If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-  
serviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned  
on the front page to locate an Authorized Service Center.  
CLEANING THE CABINET  
• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing  
alcohol, spirits, ammonia or abrasive.  
CLEANING DISCS  
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do  
not wipe in a circular motion.  
• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent,  
abrasive cleaning agents or antistatic spray intended for analogue records.  
CLEANING THE DISC LENS  
• If this unit still does not perform properly although you refer to the relevant sections and to  
“Troubleshooting” in this Owner’s Manual, the laser optical pickup unit may be dirty. Consult your  
dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.  
DISC HANDLING  
• Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.  
• Always store the disc in its protective case when it is not used.  
IR SIGNAL CHECK  
If the remote control does not work properly, you can test if the remote control sends out the infrared  
signal with AM radio or a digital camera (including built-in camera of cellular phone). It will help to  
define the cause of malfunction.  
• With an AM radio:  
Tune an AM radio to a station with no broadcasting. Press a button on remote control toward the  
radio. Sound will be fluttering when you press any key and the radio receives the signal. This  
means the remote control unit is working.  
• With a digital camera (including built-in camera of cellular phone):  
Direct a digital camera to remote control, press and hold a button on remote control. If infrared  
light appears through digital camera, the remote is working.  
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks  
of Dolby Laboratories.  
Dolby Digital Recording  
®
“Dolby Digital Recording enables consumers to record high-quality video with stereo sound on  
recordable DVD discs. The technology, when utilized instead of PCM recording, also saves record-  
able disc space, allowing for higher video resolution or extended recording time on each DVD.  
DVDs created using Dolby Digital Recording will play back on all DVD-Video players.”  
Note: This is true when the players are compatible with actual recordable DVD discs.  
EN  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
Table of contents  
Playing discs using the title menu . . . . . . . . . . . 41  
Before you start . . . . . . . . . . . . . . . . . . . 2  
Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Important Safeguards . . . . . . . . . . . . . . . . . . . . . . 3  
Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Symbols used in this Owner’s Manual . . . . . . . . . 7  
Functional overview. . . . . . . . . . . . . . . . . . . . . . . . 8  
Installing batteries in the remote control. . . . . . . 11  
Using a remote control . . . . . . . . . . . . . . . . . . . . 11  
DISPLAY menu. . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Setup menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Special playback . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Resume play. . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Fast forward / Fast reverse. . . . . . . . . . . . . . . . . 42  
Skipping TV commercials during play. . . . . . . . . 42  
Rapid play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Step by step playback. . . . . . . . . . . . . . . . . . . . . 43  
Slow forward / Slow reverse play . . . . . . . . . . . . 43  
Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
Marker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
Title/Chapter search . . . . . . . . . . . . . . . . . . . . . . 45  
Track search . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Time search . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Repeat/Random/Program playback . . . . . . . . . . 47  
Repeat playback . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Random playback . . . . . . . . . . . . . . . . . . . . . . . . 47  
Program playback. . . . . . . . . . . . . . . . . . . . . . . . 48  
Selecting the format of audio and video . . . . . . 48  
Switching subtitles . . . . . . . . . . . . . . . . . . . . . . . 48  
Switching audio soundtrack . . . . . . . . . . . . . . . . 49  
Switching virtual surround system . . . . . . . . . . . 49  
Switching camera angles . . . . . . . . . . . . . . . . . . 50  
Reducing block noise . . . . . . . . . . . . . . . . . . . . . 50  
Connections . . . . . . . . . . . . . . . . . . . . . 13  
Connection to a TV . . . . . . . . . . . . . . . . . . . . . . . 13  
Connection to a cable box or satellite box . . . . 14  
Connection to an Audio System. . . . . . . . . . . . . 15  
Getting started . . . . . . . . . . . . . . . . . . . 16  
Easy DVD recording. . . . . . . . . . . . . . . . . . . . . . . 16  
Initial setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Channel setting . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Getting channels automatically. . . . . . . . . . . . . . 18  
Adding/deleting channels . . . . . . . . . . . . . . . . . . 19  
Selecting the TV stereo or SAP . . . . . . . . . . . . . 20  
Setting the clock. . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . 21  
Manual Clock Setting . . . . . . . . . . . . . . . . . . . . . 22  
Setting the Daylight Saving Time . . . . . . . . . . . . 23  
Selecting the TV aspect ratio . . . . . . . . . . . . . . . 23  
Editing . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
Information on disc editing. . . . . . . . . . . . . . . . . 51  
Guide to a title list . . . . . . . . . . . . . . . . . . . . . . . . 51  
Editing discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
Editing discs (Setup menu). . . . . . . . . . . . . . . . . 51  
Editing discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52  
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . 52  
Putting names on titles . . . . . . . . . . . . . . . . . . . . 53  
Setting chapter marks. . . . . . . . . . . . . . . . . . . . . 54  
Clearing chapter marks. . . . . . . . . . . . . . . . . . . . 54  
Hiding chapters. . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Setting pictures for thumbnails . . . . . . . . . . . . . . 57  
Dividing a title . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
Editing discs (Setup menu). . . . . . . . . . . . . . . . . 59  
Putting name on disc . . . . . . . . . . . . . . . . . . . . . 59  
Setting or releasing disc protect . . . . . . . . . . . . . 60  
Erasing disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
Making edits compatible . . . . . . . . . . . . . . . . . . . 62  
Recording . . . . . . . . . . . . . . . . . . . . . . . 24  
Information on DVD recording . . . . . . . . . . . . . . 24  
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Recordable disc . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Recording mode . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Making discs playable in other DVD player  
(Finalize/Make Edits Compatible) . . . . . . . . . . . . 25  
Before recording . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Replacing disc menu. . . . . . . . . . . . . . . . . . . . . . 26  
Setting for Auto Chapter . . . . . . . . . . . . . . . . . . . 26  
Basic recording . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
One-touch Timer Recording . . . . . . . . . . . . . . . . 28  
Timer Recording. . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Hints for Timer Recording. . . . . . . . . . . . . . . . . . 31  
Overwriting an existing title . . . . . . . . . . . . . . . . 32  
Overwriting from the beginning of the title . . . . . 32  
Overwriting in the middle of the title . . . . . . . . . . 32  
Hints for Overwriting . . . . . . . . . . . . . . . . . . . . . . 33  
Settings for an external source . . . . . . . . . . . . . 34  
Connection to an external source. . . . . . . . . . . . 34  
Recording from an external source. . . . . . . . . . . 35  
Setting a disc to protect . . . . . . . . . . . . . . . . . . . 35  
Playing the discs in other DVD players . . . . . . . 36  
Finalizing a disc . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Auto finalizing . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Changing the Setup menu. . . . . . . . . . 63  
Tour of the Setup menu. . . . . . . . . . . . . . . . . . . . 63  
Language setting . . . . . . . . . . . . . . . . . . . . . . . . . 64  
Display setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 65  
Audio setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66  
Video setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68  
Settings for Parental lock level. . . . . . . . . . . . . . 69  
Settings for PBC (Playback Control) . . . . . . . . . 70  
Others . . . . . . . . . . . . . . . . . . . . . . . . . . 71  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 71  
Language code. . . . . . . . . . . . . . . . . . . . . . . . . . . 74  
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75  
Frequently Asked Questions. . . . . . . . . . . . . . . . 75  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76  
Playing discs . . . . . . . . . . . . . . . . . . . . 38  
Information on DVD play . . . . . . . . . . . . . . . . . . . 38  
Guide to displays . . . . . . . . . . . . . . . . . . . . . . . . 38  
Basic playback . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Playing MP3 disc . . . . . . . . . . . . . . . . . . . . . . . . 40  
Playing discs using the disc menu . . . . . . . . . . . 41  
Español . . . . . . . . . . . . . . . . . . . . . . . . . 77  
Limited Warranty . . . . . . . . . Back Cover  
EN  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
Features  
This DVD unit not only plays DVDs and CDs but also offers features for you to record to DVD discs and edit  
them after that.  
The following features are offered with this unit.  
Setting pictures for thumbnails:  
Recording  
You can change pictures for thumbnails.  
This unit is compatible with DVD+RW/DVD-RW,  
which is rewritable repeatedly and DVD+R/DVD-  
R, which is available for recording once. You can  
choose either one for your convenience. Even if you  
choose DVD-RW/DVD-R discs, these discs will  
automatically be recorded in the DVD+VR mode.  
Dividing titles (DVD+RW/DVD-RW only):  
You can divide a title into two or more.  
Putting name on disc:  
You can put your favorite disc name.  
Up to 8 program recording:  
Compatibility  
Available for playing discs on a regular DVD  
player:  
You can program the unit to record up to 8 pro-  
grams, with in a month in advance. Daily or weekly  
program recordings are also available.  
Recorded discs can be played on regular DVD  
players, including computer DVD drives compatible  
with DVD-Video playback. You will need to finalize  
the discs recorded on DVD+R/DVD-RW/DVD-R discs  
to play in other DVD players.  
One-touch Timer Recording:  
You can easily set a recording time as you prefer.  
Every time [RECORD] or [REC] is pressed during  
recording, the recording time will be increased by 30  
minutes up to 6 hours. The recording automatically  
stops when the recording time you set is reached.  
Automatic Chapter mark setting:  
Chapter marks will be put on recordings as you set in  
the Setup menu before attempting to record.  
Others  
Progressive Scan system  
Unlike conventional interlace scanning, the progressive  
scan system provides less flickering and images in higher  
resolution than that of traditional television signals.  
Automatic Title list making:  
The unit makes title list with the index automatically.  
Left channel stereo recording:  
This unit can record the sound of the Left channel  
monaural input as Left and Right channels automati-  
cally (the input from the EXT2 only).  
Symbols used in this Owner’s Manual  
To specify for what disc type each function is, we put the  
following symbols at the beginning of each item to operate.  
*DVD-RW (VR mode) disc is not played in this unit.  
Play  
Theater surround sound in your home:  
When connecting the unit to an amplifier or a decod-  
er which is compatible with Dolby Digital, you are  
allowed to experience the theater surround sound  
from discs with surround sound system.  
Symbol  
Description  
Refers to DVD-Video discs  
DVD-V  
Quick search for what you want to watch:  
You can easily find the part you want to watch using  
the search function. Search for a desired point on a  
disc by title, chapter or time.  
Refers to DVD+RW discs  
Refers to DVD+R discs  
Refers to DVD+R DL discs  
DVD+RW  
DVD+R  
DL  
DVD+R  
Virtual Surround System:  
You can enjoy stereophonic space through your  
exciting 2 channel stereo system.  
+VR  
DVD-RW  
Refers to DVD-RW discs recorded  
with +VR mode  
Playing back on MP3 disc:  
You can enjoy MP3 files which are recorded on  
CD-RW/R.  
+VR  
DVD-R  
Refers to DVD-R discs recorded  
with +VR mode  
Video  
DVD-RW  
Refers to DVD-RW discs  
(Video mode, Finalized)  
Editing  
Deleting titles:  
You can delete titles which you do not need any-  
more.  
Video  
DVD-R  
Refers to DVD-R discs  
(Video mode, Finalized)  
Refers to Audio CDs  
CD  
MP3  
Putting names on titles:  
You can put your favorite names on titles.  
Refers to CD-RW/R discs with MP3  
files  
Setting / Clearing chapter marks:  
You can set / clear chapter marks on titles.  
Refers to Video CDs  
Video CD  
Hiding unwanted chapters:  
To keep others from playing back some chapters  
without permission, you can hide chapters.  
EN  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
Functional overview  
Front Panel  
2* 3 4 5 6 7* 8  
1
The unit can also  
be turned on  
by pressing this  
button.  
*
12  
10  
14  
13  
11  
9
1. Disc tray  
Place a disc when opening the disc tray.  
2. OPEN/CLOSE A button*  
6. STOP C button  
Press to stop playback or recording.  
7. PLAY B button*  
Press to open or close the disc tray.  
3. CHANNEL L / K buttons  
Press to change the channel up and down.  
4. PREV E button  
Press to start or resume play.  
8. STANDBY-ON y button  
Press to turn the unit on and off.  
If timer programmings have been set, press to  
set the unit in timer-standby mode.  
9. AUDIO input jacks (EXT2)  
During playback, press to return to the beginning  
of the current chapter or track.  
During playback, press and hold for 1.5 seconds  
to fast reverse.  
Use to connect external equipment with a stand-  
ard audio cable.  
Or when playback is paused, press to play  
reverse step by step.  
When playback is paused, press and hold for 1.5  
seconds to play slow reverse.  
10. VIDEO input jack (EXT2)  
Use to connect external equipment with a stand-  
ard video cable.  
11. S-VIDEO input jack (EXT2)  
5. NEXT D button  
Use to connect the S-Video output of external  
equipment with an S-Video cable.  
12. RECORD button  
During playback, press to skip to the next chapter  
or track.  
During playback, press and hold for 1.5 seconds to  
fast forward.  
Or when playback is paused, press to play for-  
ward step by step.  
When playback is paused, press and hold for 1.5  
seconds to play slow forward.  
Press once to start a recording. Press repeatedly  
to start the One-touch Timer Recording.  
13. REC MODE button  
Press to switch the recording speed.  
14. Remote control sensor  
Receive signals from your remote control so that  
you can control the unit from a distance.  
Front Panel Indicator Guide  
2
1
3
3. TIMER REC indicator  
1. POWER indicator  
Light up when Timer Programming is set.  
Light up during One-touch Timer Recording.  
Flash when all Timer Programmings have been  
finished, or when a program cannot be performed  
by some reason.  
Light up when power is on.  
2. RECORD indicator  
Light up when recording function works.  
EN  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
Functional overview (cont’d)  
2
3
4
1
Rear Panel  
COMPONENT  
VIDEO IN  
IN  
VIDEO OUTPUT  
VIDEO OUT  
IN  
S-VIDEO  
Y
DIGITAL AUDIO OUTPUT  
PCM BITSTREAM  
OUT  
/
L
L
OUT  
PB/CB  
R
R
PR/CR  
ANTENNA AUDIO IN  
(E1)  
COAXIAL  
AUDIO OUT  
11  
10 9 8 7  
6
5
1. ANTENNA IN jack  
7. COMPONENT VIDEO OUTPUT jacks  
Use to connect a TV monitor with component  
video inputs with a component video cable.  
8. S-VIDEO OUT jack  
Use to connect an antenna.  
2. VIDEO IN jack (EXT1)  
Use to connect external equipment with a stand-  
ard video cable.  
Use to connect the S-Video input of a TV moni-  
tor, AV receiver or other equipment with an S-  
Video cable.  
3. VIDEO OUT jack  
Use to connect a TV monitor, AV receiver or  
other equipment with a standard video cable.  
4. AC Power Cord  
9. S-VIDEO IN jack (EXT1)  
Use to connect the S-Video output of external  
equipment with an S-Video cable.  
10. AUDIO IN jacks (EXT1)  
Connect to a standard AC outlet to supply power  
to this unit.  
5. COAXIAL DIGITAL AUDIO OUTPUT jack  
Use to connect an AV receiver, Dolby Digital  
decoder or other equipment with a coaxial digital  
input jack with a digital coaxial cable.  
6. AUDIO OUT jacks  
Use to connect external equipment with a stand-  
ard audio cable.  
11. ANTENNA OUT jack  
Use to connect an antenna cable to pass the sig-  
nal from the TV ANTENNA IN to your TV monitor.  
Use to connect a TV monitor, AV receiver or  
other equipment with a standard audio cable.  
Note  
• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent  
damage to the unit.  
• This unit does not have the RF modulator.  
EN  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
Functional overview (cont’d)  
13. TIMER PROG. button  
Remote Control  
Press to display the Timer  
programming list.  
14. OPEN/CLOSE A button*  
Press to open or close the  
disc tray.  
13  
1
2
OPEN/CLOSE  
STANDBY-ON  
TIMER  
PROG.  
ZOOM  
14*  
.@/:  
1
ABC  
2
DEF  
3
15. CH K / L buttons  
Press to change the channel  
up and down.  
16. REPEAT button  
Press to display the Repeat  
menu.  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
15  
3
4
5
6
PQRS  
TUV  
8
WXYZ  
9
7
16  
17  
DISPLAY  
SPACE  
CLEAR  
0
4
5
TITLE  
DISC MENU RETURN  
18  
17. SETUP button  
19  
6
Press to display the Setup  
menu.  
20  
7
8
9
During DVD playback, press  
and hold for more than 3 sec-  
onds to switch the progres-  
sive scanning mode to the  
interlace mode.  
21*  
22  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
RAPID PLAY PREV  
REC  
10  
23  
18. CLEAR button  
CM SKIP  
24  
Press to clear the password  
once entered or to cancel the  
programming for CD or to clear  
the selecting marker number  
in the Edit menu or to clear the  
program once entered in the  
Timer Programming list, etc.  
19. OK button  
25  
26  
11  
12  
( ) The unit can also be  
*
turned on by press-  
ing this button.  
Press to confirm or select  
menu items.  
1. ZOOM button  
8. REV E button  
20. RETURN  
button  
During playback, press to  
enlarge the picture on the  
screen.  
During playback, press to fast  
reverse.  
Press to return to the previ-  
ously displayed menu screen.  
21. PLAY B button*  
Press to start or resume play.  
22. FWD D button  
Or when playback is paused,  
press to play slow reverse.  
9. REC MODE button  
Press to switch the recording  
mode.  
10. RAPID PLAY button  
During playback, press to  
playback in a slightly faster/  
slower mode with keeping the  
audio quality.  
2. STANDBY-ON button  
Press to turn the unit on and off.  
If timer programmings have  
been set, press to set the unit  
in timer-standby mode.  
3. Number/Character buttons  
Press to select channel numbers.  
Press to select a title/chapter/  
track on display.  
Press to enter values for the  
settings in the Setup menu.  
Or press to enter title names.  
4. DISPLAY button  
During playback, press to play  
fast forward.  
Or when playback is paused,  
press to play slow forward.  
23. NEXT G button  
During playback, press to skip to  
the next chapter or track.  
Or when playback is paused,  
press to play forward step by step.  
24. PAUSE F button  
Press to pause play or record-  
ing.  
11. REC button  
Press once to start a record-  
ing. Press repeatedly to  
start the One-Touch Timer  
Recording.  
Press to display the Display  
menu on or off.  
5. TITLE button  
12. PREV H button  
During playback, press to return  
to the beginning of the current  
chapter or track. Or when play-  
back is paused, press to play  
reverse step by step.  
25. CM SKIP button  
During playback, press to skip  
30 seconds.  
26. STOP C button  
Press to display the Title list.  
6. DISC MENU button  
Press to display the Disc menu.  
7. Cursor K / L / { / B buttons  
Press to select items or settings.  
Press to stop playback or  
recording.  
Press to exit from the Title list.  
EN  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
Functional overview (cont’d)  
Installing batteries in the remote control Using a remote control  
Keep in mind the following when using the remote  
control:  
• Make sure that there is no obstacle between the  
remote control and the remote sensor on the unit.  
• Remote operation may become unreliable if strong  
sunlight or fluorescent light is shining on the  
remote sensor of the unit.  
Install two “AA” size batteries (supplied) matching the  
polarity indicated inside battery compartment of the  
remote control.  
1
2
3
• Remote control for different devices can interfere  
with each other. Avoid using remote control for  
other equipment located close to the unit.  
• Replace the batteries when you notice a fall off in  
the operating range of the remote control.  
• The maximum operable ranges from the unit are  
as follows.  
- Line of sight: approx. 23 feet (7m)  
- Either side of the center:  
approx. 16 feet (5m) within 30°  
Note:  
Incorrect use of batteries can result in hazards  
such as leakage and bursting. Please observe the  
following:  
• Do not mix new and old batteries together.  
• Do not use different kinds of batteries together,  
although they may look similar, different batteries  
may have different voltages.  
- Above: approx. 16 feet (5m) within 15°  
- Below: approx. 10 feet (3m) within 30°  
• Make sure that the plus and minus ends of  
each battery match the indications in the battery  
compartment.  
• Remove batteries from equipment that is not going  
to be used for a month or more.  
Within about  
23 feet (7m)  
• When disposing of used batteries, please comply  
with governmental regulations or environmental  
public instruction’s rules that apply in your country  
or area.  
• Do not recharge, short-circuit, heat, burn or  
disassemble batteries.  
30°  
30°  
Remote  
control  
Guide to Displays on screen menu  
This unit uses the following on screen menu for most operations: Setup menu and Title list, and Display menu.  
They allow you to change the playing status of the disc during playback.  
The Display menu also gives you information on the status of the disc.  
DISPLAY menu  
Press [DISPLAY] to call up the  
Display menu. This menu will  
give you the information on the  
playing disc. Some operations are  
available while disc is playing.  
1.Indicates a disc type and a  
format mode (Format mode is  
displayed with DVD-RW/DVD-R  
(Video mode) disc inserted).  
NOTE: In some descriptions on  
this manual, only one disc type  
is indicated as an example.  
2.Indicates a channel number.  
3.Indicates a recording mode and  
possible recording time left.  
4.Indicates a title number, chapter  
number and the time lapse of  
disc play.  
5.Each icon means:  
: Search  
: Audio  
: Subtitle  
: Angle  
4
1
1
1
0:00:00  
DVD+RW  
: Repeat  
CH  
2
: Marker  
5
2
: Noise Reduction  
: Zoom  
HQ(1Hr)  
1:01  
: Surround  
6
3
6.Indicates current disc status.  
EN  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
Functional overview (cont’d)  
Setup menus  
Press [SETUP] to display the Setup menu. Then using [K / L], select a menu and press [OK] to display  
the menu. These menus provide entries to all main functions of the unit.  
1.Edit Disc Name:  
<Disc Edit menu (DVD+RW)>  
Setup  
Allows you to rename the  
disc formatted with DVD+VR.  
2.Disc Protect :  
Required Settings  
Playback  
Display  
1
2
3
4
5
6
7
Disc Edit  
Edit Disc Name  
1
Recording  
Clock  
Disc Protect OFF ON  
Erase Disc  
2
3
34  
Allows you to protect a disc  
from accidental editing or  
recording.  
Channel  
Make Edits Compatible  
Disc Edit  
3.Erase Disc (DVD+RW/DVD-  
RW only):  
Allows you to erase all  
contents in the disc and  
format it.  
1.Required Settings:  
To set up the required  
settings.  
<Disc Edit menu (DVD-RW)>  
4.Make Edits Compatible  
(DVD+RW only):  
Allows you to make edits  
possible to play discs in  
other units after editing titles.  
Finalize (DVD+R/DVD-R/  
DVD-RW only):  
2.Playback:  
Disc Edit  
To set up the unit to play  
discs as you prefer.  
3.Display:  
Edit Disc Name  
1
Disc Protect OFF ON  
Erase Disc  
2
3
34  
Finalize  
To set up the OSD screen as  
you prefer.  
4.Recording:  
Allows you to finalize a disc  
containing recorded titles.  
5.Random Play:  
Allows you to activate the  
random playback feature.  
6.Program Play (Audio CD/  
Video CD only):  
Allows you to activate the  
programmed playback  
feature.  
To set up the unit to record  
to discs as you prefer.  
5.Clock:  
To set up the clock of the  
unit as you need.  
<Disc Edit menu (DVD+R/DVD-R)>  
Disc Edit  
6.Channel:  
Edit Disc Name  
1
2
34  
Disc Protect OFF ON  
Finalize  
To adjust the channel setting  
of the unit as you prefer.  
7.Disc Edit / CD Playback  
Mode:  
7.PBC (Video CD only)  
Allows you to select images  
or information on the menu  
screen by activating PBC  
(Playback control) function.  
“Disc Edit” is only available  
with disc recorded in this  
unit. (DVD+VR mode)  
“CD Playback Mode” is  
available only when an Audio  
CD disc, a Video CD or a  
CD-RW/R disc with MP3 files  
is inserted into the unit.  
<CD Playback Mode menu>  
CD Playback Mode  
Random Play  
45  
56  
57  
Program Play  
PBC (Video CD only)  
ON  
EN  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connection to a TV  
Antenna  
Antenna  
Cable  
TV signal  
Cable  
TV signal  
(Back of TV)  
VIDEO  
AUDIO IN  
(Back of TV)  
or  
6
or  
5
4
Connect  
Connect  
3
Plug in the AC  
power cord  
of this unit.  
Video  
cable  
(supplied)  
Audio  
cable  
(supplied)  
Connect  
RF cable  
(supplied)  
COMPONENT  
VIDEO IN  
VIDEO OUTPUT  
VIDEO OUT  
L
IN  
S-VIDEO  
Y
DIGITAL AUDIO OUTPUT  
IN  
OUT  
PCM BITSTREAM  
/
L
OUT  
2
P
B/CB  
1
R
R
Connect  
PR/CR  
ANTENNA AUDIO IN  
(E1)  
COAXIAL  
Disconnect  
AUDIO OUT  
(Back of this unit)  
Make one of the following connections, depending on the capabilities of your existing equipment.  
Method 1  
Method 2  
Basic Audio  
Better picture  
Best picture  
COMPONENT  
VIDEO IN  
TV  
Y
S-VIDEO IN  
R
L
PB/CB  
PR/CR  
Audio cable  
(supplied)  
S-Video cable  
(commercially available)  
Component Video cable  
(commercially available)  
This unit  
COMPONENT  
VIDEO OUT  
S-VIDEO  
OUT  
VIDEO OUTPUT  
COMPONENT  
VIDEO OUTPUT  
VIDEO IN  
VID
IN  
Y
S-VIDEO  
Y
L
IN  
L
OUT  
L
OUT  
PB  
/C  
B
R
R
R
R
AUDIO IN  
(E1)  
PR  
/C  
P
B/CB  
R/CR  
ANTENNA  
AUDIO OUT  
AUDIO OUT  
P
AUDIO OUT  
S-VIDEO OUT  
COMPONENT VIDEO OUT  
After you have completed connections  
• Switch the input selector on your TV to an appropriate external input channel (usually near channel 0). Press a  
button on the TV’s original remote control that selects an external input channel until the DVD recorder’s picture  
appears. Check your TV owner’s manual for details.  
Input Mode Names for Common TV Brands  
LXI-Series  
Magnavox  
Panasonic  
RCA  
00  
Admiral  
Curtis Mathis  
GE  
AUX  
Sharp  
Sony  
00  
AUX CHANNEL  
TV/VIDEO  
LINE1, LINE2, 00, 90, 91, 92, 93  
INPUT, TV/VCR, 00, 90, 91, 92, 93  
INPUT, AUX  
VIDEO1, VIDEO2, VIDEO3  
Toshiba  
TV/GAME  
00  
Hitachi  
JVC  
INPUT, TV/VCR, 00, 90, 91, 92, 93 Zenith  
VIDEO, VIDEO1, VIDEO2, VIDEO3  
AUX  
Samsung  
Sanyo  
TV/VIDEO  
VIDEO  
Kenwood  
Note  
• Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted  
due to the copy protection system.  
• When Progressive Scan mode is selected, no video signal will be output from the VIDEO OUT or  
S-VIDEO OUT jack.  
To set progressive scan mode, refer to page 68  
• This unit is compatible with the Progressive Scan System. The feature provides you with the higher definition  
images than the traditional output system does. To utilize this feature, you must set Progressive Scan mode to “ON”.  
EN  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connection to a cable box or satellite box  
(Back of TV)  
VIDEO  
AUDIO IN  
4
3
Connect  
Connect  
2
Video  
cable  
(supplied)  
Connect  
Audio  
cable  
(supplied)  
(Cable box or  
Cable  
TV signal  
Satellite box) RF cable  
(supplied)  
IN  
OUT  
COMPONENT  
VIDEO OUTPUT  
VIDO IN  
IN  
S-VIDEO  
Y
DIGITAL AUDIO OUTPUT  
PCM BITSTREAM  
IN  
L
OUT  
/
OUT  
P
B/CB  
R/CR  
RF cable  
(Commercially  
available)  
R
1
R
P
ANTENNA AUDIO IN  
(E1)  
COAXIAL  
AUDIO OUT  
Connect  
(Back of this unit)  
With this setup:  
• You can record any unscrambled channel by selecting the channel on the cable box or satellite  
box. Be sure that the cable box or satellite box is turned on.  
• You cannot record one channel while watching another channel.  
Note to the Cable TV System Installer :  
This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the  
National Electrical Code, which provides guidelines for proper grounding - in particular, specifying  
that the cable ground shall be connected to the grounding system of the building, as close to the  
point of cable entry as possible.  
EN  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connection to an Audio System  
• When you change the connections, all devices should be turned off.  
• Refer to the operation manual accompanying external devices for more information.  
Method 1  
Method 2  
Stereo system  
Dolby Digital decoder,  
MD deck or DAT deck  
Analog audio  
input jacks  
AUDIO  
COAXIAL  
Digital audio  
input jack  
Audio Coaxial  
Digital cable  
(commercially  
available)  
Audio cable  
(supplied)  
VIDEO OUT  
L
This unit  
DIGITAL AUDIO OUTPUT  
PCM / BITSTREAM  
R
AUDIO OUT  
DIGITAL  
AUDIO OUT  
COAXIAL  
AUDIO OUT  
Setup >Playback >Disc Audio >Digital Out >  
Setting  
Connection  
Dolby Digital  
If output is Dolby Digital  
encoded audio, connect to  
a Dolby Digital decoder.  
Stream  
Unless connected to a  
Dolby Digital decoder.  
PCM  
PCM  
Connecting to an MD deck  
or DAT deck.  
* To complete these settings, refer to pages 66-67.  
Note  
Note  
• The audio source on a disc in a Dolby Digital Multi-channel  
surround format cannot be recorded as digital sound by an  
MD or DAT deck.  
• Playing a DVD using incorrect settings may  
generate noise distortion and may also damage  
the speakers.  
• By hooking this unit up to a Multi-channel Dolby Digital  
decoder, you can enjoy high-quality Dolby Digital Multi-  
channel surround sound as heard in the movie theaters.  
• Playing a DVD using incorrect settings may generate noise  
distortion and may also damage the speakers.  
EN  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Easy DVD recording  
The following will help you to understand easily how to record to DVD discs.  
Note:  
Make sure batteries are in the remote control and you have connected this unit with the TV correctly.  
Step 1: Choose a disc type.  
Step 2: Turn on the  
unit.  
There are several types of recordable DVD discs to choose from.  
This unit can record on the following type of discs.  
Remote Control  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
.@/:  
1
ABC  
DEF  
3
GHI  
CH  
4
Select the input to which  
the unit is connected on  
your TV.  
For example, when you want to record repeatedly on the  
same disc, select the rewritable DVD+RW/DVD-RW type disc.  
When you want to save recordings without any alteration, a  
non-rewritable DVD+R/DVD-R can be your choice.  
Step 4: Select the  
recording  
Step 3: Insert a blank disc.  
mode.  
1
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
To open  
.@/:  
1
ABC  
2
DEF  
3
GHI  
JKL  
MNO  
CH  
4
5
6
2
PQRS  
7
TUV  
8
WXYZ  
9
REPEAT  
REC MODE  
REV  
PLAY  
PAUSE  
FWD  
NEXT  
RAPID PLPREV  
REC  
CM SKIP  
3
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
To close  
.@/:  
1
ABC  
2
DEF  
3
GHI  
JKL  
MNO  
CH  
4
5
6
PQRS  
7
TUV  
8
WXYZ  
9
REPEAT  
HQ (1Hr)  
0:58  
Formatting  
90%  
Loading  
DVD+RW/DVD-RW only  
This operation may take a while to be recognized.  
EN  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Easy DVD recording (cont’d)  
Step 5: Select the  
Step 6: Record  
on DVD  
Step 7: Stop the  
recording.  
desired  
channel.  
disc.  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
RAPID PLAY PREV  
REC  
NEXT  
STANDBY-ON  
OPEN/C
TIMER  
PROG.  
CM SKIP  
ZOOM  
.@/:  
1
ABC  
2
DEF  
3
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
GHI  
JKL  
MNO  
CH  
RAPID PLAY PREV  
REC  
4
5
6
PQRS  
TUV  
8
WXYZ  
9
REPEAT  
SETUP  
CM SKIP  
7
DISPLAY  
SPACE  
CLEAR  
0
Writing to Disc  
90%  
.@/:  
1
ABC  
2
DEF  
3
GHI  
JKL  
MNO  
CH  
4
5
6
1
SP (2Hr)  
PQRS  
7
TUV  
8
WXYZ  
9
REPEAT  
NOV/21/06 11:00AM CH12 SP  
NOV/21/06 0:20:44  
2
EMPTY TITLE  
1:41:17 SP (2Hr)  
CH 12  
This operation may take  
a while to be completed.  
I
Hint 1: Play the recorded contents  
Start Rec.  
Title 1  
Stop/Start  
Stop Rec.  
You can select the title you want to play from a displayed title list, and  
immediately start to play. Recorded contents are easily accessible, with  
simple procedure of choosing a title on in the menu screen.  
What are titles and chapters?  
Title 2  
The contents of the DVD disc are generally divided into titles. Titles  
may be further divided into chapters.  
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2  
Hint 2: Edit the recorded disc  
You will find editing discs is easy. This unit offers convenient edit functions to discs formatted with  
DVD+VR mode.  
You can edit the following from a title list or setup menu.  
• Deleting titles  
• Putting names on titles  
• Setting / clearing chapter marks  
• Hiding chapters  
• Setting pictures for thumbnails  
• Dividing a title (DVD+RW/DVD-RW only)  
• Putting name on disc  
Finalizing a Disc  
• This will allow DVD+R/DVD-RW/DVD-R discs recorded on this unit to be played back on a different DVD  
player — without finalization it will not be playable on other units.  
•
After finalizing a disc, you cannot edit contents on that disc.  
• DVD+RW discs is not required to finalize but to “Make Edits Compatible” to play on other units after  
editing. You can edit the disc after “Make Edits Compatible”.  
EN  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Initial setting  
Turn on this unit for the first time,  
you need to follow these steps.  
3
Using [K / L], select your  
desired language on screen  
menu. Then press [OK] to set  
language.  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
1
1
Press [STANDBY-ON].  
.@/:  
1
ABC  
2
DEF  
3
“Channel Preset” will automatically  
appear.  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
2
4
5
6
PQRS  
TUV  
8
WXYZ  
9
Turn the TV on. Select the input  
to which the unit is connected.  
Refer to the table on page 13.  
7
Initial Setup  
DISPLAY  
SPACE  
CLEAR  
0
Channel Preset  
TITLE  
DISC MENU RETURN  
3
4
4
TV's original  
remote control  
Press [OK] to start Channel  
Preset.  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
RAPID PLAY PREV  
REC  
The unit will start getting channels  
available in your area.  
CM SKIP  
TV /VIDEO  
CH  
1
*This button can  
be labeled as  
INPUT, AUX, etc.  
Auto Presetting Now  
After channel setting is finished,  
“Clock Setting” will appear.  
Then press [OK].  
“Initial Setup” will automatically  
appear.  
Initial Setup  
Initial Setup  
English  
Français  
Español  
Clock Setting  
5
Follow to step 3 in “Manual  
Clock Setting” on page 22.  
•
If a Public Broadcasting Station (PBS)  
is available in your area, follow Auto  
Clock Setting on page 21.  
“
”
Channel setting  
If you have changed antenna  
connection, we recommend that  
you program available channels  
in your area with the following  
procedures.  
2
Using [K / L], select “Channel”.  
Press [OK].  
STANDBY-ON  
ZOOM  
OPEN/CLOSE  
TIMER  
PROG.  
Channel menu will appear.  
.@/:  
1
ABC  
2
DEF  
3
4
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
3
Getting channels  
automatically  
4
5
6
Using [K / L], select “Auto  
Channel Preset”. Press [OK].  
The unit will start getting channels  
available in your area.  
PQRS  
TUV  
8
WXYZ  
9
7
DISPLAY  
SPACE  
CLEAR  
0
1
4
TITLE  
DISC MENU RETURN  
1
Press [SETUP].  
4
2
3
Press [SETUP] to exit.  
• You can select only the  
channels memorized in this  
unit by using [CH K / L] or the  
Number buttons.  
EN  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Channel setting (cont’d)  
To select a channel  
You can select a channel by directly entering channel using the Number buttons on the remote control.  
Notes for using the Number buttons:  
• When selecting cable channels which are higher than 99, enter channel numbers as a three-digit  
number.(For example: 117, press [1], [1], [7])  
• You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on).  
• You can select the line input mode (“E1” or “E2”). To select “E1” by pressing [0], [0], [1]. To select “E2” by  
pressing [0], [0], [2]. Details are on page 35.  
Note  
• If the auto channel presetting is canceled during presetting, some channels not yet preset may not be  
received.  
• The selection will depend on how you receive the TV channels.  
To cancel the auto channel presetting during scanning:  
Press [RETURN ] or [SETUP] to cancel.  
Adding/deleting  
channels  
4
Select the channel number to  
The channels you no longer  
add or delete.  
Press [{] or [CH L] to move to a  
lower channel number.  
Press [B] or [CH K] to move to a  
higher channel number.  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
receive or seldom watch can  
be deleted from the memory.  
You also may add channels into  
memory.  
ZOOM  
.@/:  
1
ABC  
2
DEF  
3
4
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
4
5
6
PQRS  
TUV  
8
WXYZ  
9
Press the Number buttons to  
select a channel number directly.  
7
1
DISPLAY  
SPACE  
CLEAR  
0
Press [SETUP].  
1
6
TITLE  
DISC MENU RETURN  
Manual Channel Preset  
2
CH  
Add  
Delete  
7
Using [K / L], select “Channel”.  
Press [OK].  
2
3
4
5
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
Channel menu will appear.  
RAPID PLAY PREV  
REC  
CM SKIP  
3
Using [K / L], select “Manual  
Channel Preset”. Press [OK].  
Manual Channel Preset menu will  
appear.  
5
Using [K / L], select “Add” or  
“Delete”. Press [OK].  
The channel number will be  
added or deleted from the channel  
memory. Then the next channel  
number will appear so that you  
can continue adding or deleting  
channels.  
Manual Channel Preset  
CH  
Add  
Delete  
2
6
Press [SETUP] to exit.  
Note  
• [CH K / L] works on the  
memorized channel in this  
unit.  
• [{ / B] works on all of  
channel numbers.  
EN  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Selecting the TV stereo or SAP  
You can select a sound channel  
to output from TV. “Stereo” has  
been selected as the default.  
3
Using [K / L], select “TV Audio  
Select”. Press [OK].  
Option window will appear.  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
1
ZOOM  
Press [SETUP].  
TV Audio Select  
.@/:  
1
ABC  
2
DEF  
3
Stereo  
SAP  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
2
4
5
6
PQRS  
TUV  
8
WXYZ  
9
Using [K / L], select “Required  
Settings”. Press [OK].  
Required Settings menu will  
appear.  
7
DISPLAY  
SPACE  
CLEAR  
0
1
5
TITLE  
DISC MENU RETURN  
2
3
4
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
4
Using [K / L], select “Stereo” or  
RAPID PLAY PREV  
REC  
“SAP”. Press [OK].  
CM SKIP  
Stereo:  
Outputs main-audio.  
SAP (Secondary Audio Program):  
Outputs sub-audio.  
5
Press [SETUP] to exit.  
Notes on TV channel audio  
• When you record a TV program available in second audio or  
stereo, you have to select either Stereo or SAP in the Channel  
Preset screen beforehand. Refer to the following table to check an  
appropriate setting.  
Selected  
audio  
Broadcast  
audio  
Disc  
Audio  
output  
recording  
Stereo  
STEREO+SAP STEREO STEREO  
STEREO  
MONO+SAP  
MONO  
STEREO STEREO  
MONO  
MONO  
MONO  
MONO  
SAP  
SAP  
STEREO+SAP SAP  
STEREO  
MONO+SAP  
MONO  
STEREO STEREO  
SAP  
SAP  
MONO  
MONO  
• You can only play the disc in second audio if a TV program is  
available in second audio and you set “ TV Audio Select ” to “ SAP ”.  
EN  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Setting the clock  
Set the clock before you try the  
Timer Programming. If a Public  
Broadcasting Station (PBS) is  
available in your area, follow “Auto  
Clock Setting” below. If not, follow  
“Manual Clock Setting” on page 22.  
4
• If you do not know your PBS  
channel number:  
Using [K / L], select “Auto”.  
Press [OK].  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
6
4
.@/:  
1
ABC  
2
DEF  
3
The setting will be activated.  
Auto Clock Setting  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
• If you know your PBS channel  
number:  
Using [K / L], select  
“Manual”. Press [OK].  
PQRS  
TUV  
8
WXYZ  
9
Make sure  
7
• The antenna/Cable TV  
connections are correct.  
• If this unit is connected to a  
Cable Box or Satellite Box,  
select the local PBS station  
on them to set the clock  
automatically.  
DISPLAY  
SPACE  
CLEAR  
0
1
5
TITLE  
DISC MENU RETURN  
Auto Clock Setting - Manual  
2
3
4
Set Channel No.  
CH  
1
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
RAPID PLAY PREV  
REC  
1
CM SKIP  
Press [SETUP].  
2
Using the Number buttons  
or [K / L], enter your PBS  
channel number. Press [OK].  
The setting will be activated.  
Using [K / L], select “Clock”.  
Press [OK].  
Clock menu will appear.  
3
• If you want to set the clock  
manually and cancel the Auto  
Clock Setting function: Using  
[K / L], select “OFF” in “Auto  
Clock Setting”. Press [OK].  
The Auto Clock Setting function  
will be canceled.  
Using [K / L], select “Auto  
Clock Setting”. Press [OK].  
Option window will appear.  
Auto Clock Setting  
OFF  
Auto  
Manual  
5
Press [SETUP] to exit.  
6
Press [STANDBY-ON] to turn off  
the unit.  
This unit will search for the time  
only when the power is off. Leave  
it off for several minutes to give  
this unit time to set the clock.  
Note  
• The clock may set itself  
automatically after you  
connect the antenna/cable  
signal to this unit and plug in  
the power cord.  
EN  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Setting the clock (cont’d)  
Manual Clock Setting  
4
STANDBY-ON  
OPEN/CLOSE  
Using [K / L], enter the date  
(month / day / year).  
Press [{ / B] to move the cursor.  
TIMER  
PROG.  
ZOOM  
1
.@/:  
1
ABC  
2
DEF  
3
Press [SETUP].  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
Clock Setting  
2
PQRS  
TUV  
8
WXYZ  
9
7
Using [K / L], select “Clock”.  
DISPLAY  
SPACE  
CLEAR  
Press [OK].  
0
1
7
TITLE  
DISC MENU RETURN  
JAN / 01 / 2006 ( SUN )  
12: 00 AM  
3
Using [K / L], select “Clock  
Setting”. Press [OK].  
Clock Setting menu will appear.  
2
3
4
5
6
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
RAPID PLAY PREV  
REC  
Clock Setting  
5
CM SKIP  
Using [K / L], enter the time  
(hour / minute). Press [{ / B].  
A cursor will move to AM.  
---- / -- / ---- ( ---- )  
-- : -- --  
Clock Setting  
JAN/ 01 / 2006 ( SUN )  
12: 00 AM  
Press [OK] again.  
Default date will appear.  
6
Press [K / L] to select “AM” or  
“PM”. Press [OK].  
Clock menu will appear, then the  
settings will be activated.  
Although seconds are not dis-  
played, they begin counting from  
zero.  
7
Press [SETUP] to exit, if Clock  
menu appears.  
Note  
•
Your clock setting will be lost if  
either there is a power failure  
or this unit has been unplugged  
for more than 30 seconds when  
you set the clock manually.  
EN  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Setting the clock (cont’d)  
Setting the Daylight  
Saving Time  
3
STANDBY-ON  
OPEN/CLOSE  
Using [K / L], select “Daylight  
Saving Time”. Press [OK].  
Option window will appear.  
TIMER  
PROG.  
ZOOM  
When “Daylight Saving Time” is  
ON, the unit clock will automati-  
cally move forward one hour on  
the first Sunday in April and move  
back one hour on the last Sunday  
in October.  
.@/:  
1
ABC  
2
DEF  
3
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
Daylight Saving Time  
PQRS  
TUV  
8
WXYZ  
9
7
ON  
DISPLAY  
SPACE  
CLEAR  
OFF  
0
1
5
“ON” has been selected as the  
default.  
TITLE  
DISC MENU RETURN  
2
3
4
1
4
Press [SETUP].  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
Using [K / L], select “ON” or  
“OFF”. Press [OK].  
RAPID PLAY PREV  
REC  
2
Select “ON” when currently  
utilizing the daylight saving time.  
CM SKIP  
Using [K / L], select “Clock”.  
Press [OK].  
Clock menu will appear.  
5
Press [SETUP] to exit.  
Selecting the TV aspect ratio  
You can select the TV aspect ratio  
DISPLAY  
TITLE  
SPACE  
0
CLEAR  
SETUP  
OK  
to match the formats of what you  
are playing with the unit and your  
TV screen (4:3 standard or 16:9  
widescreen TV).  
“4:3 Letter Box” has been selected  
as the default.  
3
1
5
DISC MENU RETURN  
Using [K / L], select “TV  
Aspect”. Press [OK].  
Option window will appear.  
2
3
4
TV Aspect  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
4:3 Letter Box  
4:3 Pan & Scan  
16:9 Wide  
RAPID PLAY PREV  
REC  
1
CM SKIP  
Press [SETUP].  
2
Note  
Using [K / L], select “Required  
Settings”. Press [OK].  
Required Settings menu will  
appear.  
If you have a standard TV:  
Select “4:3 Letter Box”, so that  
black bars appear on the top  
and bottom of the screen when  
playing wide-screen picture  
and all that. Select “4:3 Pan &  
Scan” for a full height picture  
with both sides trimmed when  
playing wide-screen picture  
and all that.  
Refer to the Note on this page.  
4
Using [K / L], select a desired  
option. Press [OK].  
5
Press [SETUP] to exit.  
If you have a widescreen TV:  
Select “16:9 Wide”.  
EN  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Information on DVD recording  
Information  
Recording mode  
This unit can record to DVD+RW, DVD-RW, DVD+R  
and DVD-R discs.  
DVD+R/DVD-R discs can only be recorded to once.  
DVD+RW/DVD-RW discs can be recorded to and  
erased many times.  
This unit will record DVD+VR mode automatically.  
DVD-RW/DVD-R disc will be recorded in the  
DVD+VR mode automatically in this unit.  
You can select a recording mode among 6 options,  
and the recording time will depend on the recording  
mode you select as follows.  
Recording Recording  
Video/Sound  
Quality  
Disc Size  
8cm Disc  
mode  
time  
18 min  
36 min  
(good)  
HQ (1Hr)  
SP (2Hr)  
Logo  
SPP (2.5Hr) 45 min  
Attributes  
LP (3Hr)  
EP (4Hr)  
SLP (6Hr)  
HQ (1Hr)  
SP (2Hr)  
SPP (2.5Hr)  
LP (3Hr)  
EP (4Hr)  
SLP (6Hr)  
54 min  
72 min  
(poor)  
(good)  
108 min  
60 min  
8cm/12cm, single-sided, single layer disc  
Approx. max. recording time (SLP mode):  
360 minutes (4.7GB) (for 12cm)  
108 minutes (1.4GB) (for 8cm)  
DVD+RW  
DVD+R  
120 min  
150 min  
180 min  
240 min  
360 min  
12cm Disc  
(poor)  
• The recording time are estimates and actual  
recording time may differ.  
• The audio and video quality is getting poorer as the  
Recording time becomes longer.  
• Each time [REC MODE] is pressed, recording  
mode and its allowed recording time will be  
displayed.  
8cm/12cm, single-sided, single layer disc  
Approx. max. recording time (SLP mode):  
360 minutes (4.7GB) (for 12cm)  
108 minutes (1.4GB) (for 8cm)  
DVD-RW  
DVD-R  
Note  
• This recorder cannot record CD-R or CD-RW  
discs.  
Recordable disc  
• DVD+R 1x-16x, DVD+RW 1x-4x, DVD-R 8x/16x,  
and DVD-RW 4x discs can be used in this  
recorder.  
• We strongly recommend for good recording quality:  
TDK DVD+R 4x/8x/16x, SONY DVD+R 4x/8x/16x,  
MAXELL DVD+R 4x/8x/16x, SONY DVD+RW 4x,  
MAXELL DVD-R 8x/16x, MAXELL DVD-RW 4x  
• Discs that have been tested and are proven to be  
compatible with this recorder:  
VERBATIM DVD+R 8x VERBATIM DVD+RW 4x  
VERBATIM DVD-R 8x VERBATIM DVD-RW 2x  
MAXELL DVD-R 16x  
• You can play DVD+RW in most DVD players  
without finalizing. To play discs other than  
DVD+RW in other DVD players, you will need to  
finalize.  
• DVD+RW/R, DVD-RW/R and CD-RW/R discs  
recorded on a personal computer or a DVD or  
CD recorder may not play if the disc is damaged  
or dirty or if there is dirt of condensation on the  
player’s lens.  
• If you record a disc using a personal computer,  
even if it is recorded in a compatible format, there  
are cases in which it may not play because of the  
settings of the application software used to create  
the disc. (Check with the software publisher for  
more detailed information.)  
JVC DVD-RW 4x  
• DVD-RW/R discs recorded in Video mode cannot be  
recorded additionally using the unit.  
• Since the recording is made by the variable bit  
rate (VBR) method, depending on the picture  
you are recording, the actual remaining time  
for recording may be a little shorter than the  
remaining time displayed on the OSD.  
• You cannot record copy-protected video using  
this unit. (Copy-protected video includes DVD-  
Video discs and some satellite broadcasts.)  
• You cannot record videos that includes “copy-  
once only” signal.  
EN  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Information on DVD recording (cont’d)  
Making discs playable in other DVD player (Finalize/Make Edits Compatible)  
After recording on DVD+R/DVD-RW/DVD-R, you must finalize the disc in order to play on other units. (Refer to  
page 36.)  
There is no need to finalize DVD+RW discs but to “Make Edits Compatible” (refer to page 62) for playing on  
other units after editing.  
DVD+RW  
Make Edits Compatible*  
Editing titles  
DVD-RW/DVD-R  
DVD+R  
Finalizing*  
Playable  
This Unit  
DVD player  
Not Playable  
Not finalized  
Not performing Make Edits Compatible after editing titles  
*You cannot finalize or Make Edits Compatible in other DVD recorders.  
• Once DVD+R/DVD-RW/DVD-R discs are finalized, you cannot record additionally or edit.  
• You cannot record additionally or edit on finalized DVD-RW discs unless the DVD-RW discs are performed  
“Undo Finalize”.  
EN  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Before recording  
Replacing disc menu  
+VR  
DVD-RW  
+VR  
DVD-R  
DVD+RW  
DVD+R  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
Option window will appear.  
It can be used to prohibit recording  
additionally or to replace the title  
list after recording when inserting  
the disc includes titles and a  
different type of title list recorded  
by other units. “OFF” has been  
selected as the default.  
.@/:  
1
ABC  
2
DEF  
3
Replace Disc Menu  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
ON  
4
5
6
OFF  
PQRS  
TUV  
8
WXYZ  
9
7
DISPLAY  
SPACE  
CLEAR  
0
1
5
TITLE  
DISC MENU RETURN  
1
2
3
4
Press [SETUP].  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
2
4
RAPID PLAY PREV  
REC  
Using [K / L], select  
“Recording”. Press [OK].  
Recording menu will appear.  
Using [K / L], select “ON” or  
“OFF”. Press [OK].  
CM SKIP  
ON: Replacing the title list  
OFF: Prohibiting additional record  
3
Using [K / L], select “Replace  
Disc Menu”. Press [OK].  
5
Press [SETUP] to exit.  
Setting for Auto Chapter  
+VR  
.@/:  
1
ABC  
2
DEF  
3
+VR  
DVD-R  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
DVD+RW  
DVD+R  
DVD-RW  
4
5
6
PQRS  
TUV  
8
WXYZ  
9
You can set a specified time for  
chapter marks.  
7
4
DISPLAY  
SPACE  
CLEAR  
0
Using [K / L], select a desired  
time option. Press [OK].  
1
5
TITLE  
DISC MENU RETURN  
1
Press [SETUP].  
2
3
4
5
Press [SETUP] to exit.  
2
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
Using [K / L], select “Recording”.  
RAPID PLAY PREV  
REC  
Press [OK].  
CM SKIP  
3
Using [K / L], select “Auto  
Chapter”. Press [OK].  
Option window will appear.  
Note  
Auto Chapter  
• The interval for auto chapter  
marks may slightly deviate  
OFF  
5 minutes  
10 minutes  
15 minutes  
30 minutes  
60 minutes  
from the one you specified on  
the Auto chapter screen.  
• A blank chapter may be  
created depending on the  
remaining time of the disc.  
EN  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Basic recording  
+VR  
DVD-R  
+VR  
DVD-RW  
DVD+RW  
DVD+R  
Follow the steps below to record  
TV programs.  
7
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
Press [REC] to start recording.  
“I” mark will be displayed for 5  
seconds.  
ZOOM  
2
4
6
1
6
.@/:  
1
ABC  
2
DEF  
3
1
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
Press [STANDBY-ON].  
Turn the TV on and be sure to  
select the input to which the unit is  
connected.  
I
4
5
6
PQRS  
TUV  
8
WXYZ  
9
7
Press [PAUSE F] to pause  
recording. Press [PAUSE F] or  
[REC] again to restart recording.  
DISPLAY  
SPACE  
CLEAR  
0
TITLE  
DISC MENU RETURN  
2
Press [OPEN/CLOSE A].  
The disc tray will open.  
8
Press [STOP C] to stop record-  
ing.  
The recorded title will be on the  
displayed title list. (Refer to “Guide  
to a title list” on page 51.)  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
5
7
RAPID PLAY PREV  
REC  
3
Insert your disc with its label  
facing up. Align the disc to the  
disc tray guide.  
CM SKIP  
7
8
Writing to Disc  
90%  
disc tray  
guide  
1
SP (2Hr)  
NOV/21/06 11:00AM CH12 SP  
NOV/21/06 0:20:44  
2
4
EMPTY TITLE  
1:41:17 SP (2Hr)  
Press [OPEN/CLOSE A] to  
close the disc tray.  
This operation may take a  
while to be completed.  
C
•
Press [STOP ] to exit the title list.  
• When inserting a brand-new  
DVD+RW/DVD-RW disc, the  
unit automatically starts to  
format.  
Note  
• Recording starts immediately  
and continues until the disc is  
full or you stop recording.  
• When the unit clock has not  
been set, the space for a date  
and time of title names will be  
blank.  
• When you record a TV  
program which has Stereo  
and SAP audio, you have to  
select the TV channel audio  
(Stereo or SAP) beforehand.  
Only the selected channel  
audio will be recorded. Refer  
to “Selecting the TV stereo  
or SAP” on page 20 for more  
details.  
•
If titles have been recorded on the  
disc, the title list is displayed. Press  
[STOP C] to exit the title list.  
5
Using [REC MODE], select a  
recording mode.  
Refer to “Recording mode” on  
page 24.  
HQ (1Hr)  
0:58  
6
Using [CH K / L] or the Number  
buttons, select a desired chan-  
nel to record.  
• You cannot change the  
recording mode during the  
REC pause mode.  
• You can change a channel  
during the REC pause mode.  
CH 12  
EN  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
One-touch Timer Recording  
+VR  
+VR  
DVD-RW  
DVD+RW  
DVD+R  
DVD-R  
This is a simple way to set the  
recording time in blocks of 30  
minutes. Check that the disc you  
are recording onto has enough  
space for the time you set.  
When the recording finishes the  
recorder automatically goes into  
standby mode.  
4
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
Press [REC] repeatedly to select  
desired recording time.  
ZOOM  
1
3
1
.@/:  
1
ABC  
2
DEF  
3
Recording times appear on the TV  
screen (30 minutes to 6 hours).  
Recording will start.  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
3
PQRS  
TUV  
8
WXYZ  
9
7
DISPLAY  
SPACE  
CLEAR  
0
TITLE  
DISC MENU RETURN  
1
Turn on the unit and load a  
recordable disc.  
Make sure that the TV input is set  
on the unit.  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
2
4
I
0:30  
RAPID PLAY PREV  
REC  
This operation may take a  
while to be recognized.  
CM SKIP  
0:30  
(Normal Recording) 1:00  
4
2
Using [REC MODE], select a  
recording mode.  
Refer to “Recording mode” on  
page 24.  
6:00  
5:30  
When the unit reaches the  
specified time, it will be turned off  
automatically.  
3
Using [CH K / L] or the Number  
buttons, select a desired chan-  
nel to record.  
To change the recording length  
during the One-touch Timer  
Recording, press [REC] repeatedly  
until the desired length appear.  
To cancel the One-touch Timer  
Recording within the specified  
time, press [STOP C] .  
This operation may take a  
while to be completed.  
Note  
• Press [DISPLAY] to see the  
remaining recording time  
on the TV screen during the  
One-touch Timer Recording.  
• You cannot pause the One-  
touch Timer Recording.  
• Unlike a Timer Recording,  
you can perform the following  
operations during the One-  
touch Timer Recording.  
-Turning the power off.  
-Using [REC] and [STOP C].  
• The unit will be turned off  
automatically under the  
following conditions.  
1) No space remained on the  
disc.  
2) When a power failure occurs.  
EN  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Timer Recording  
+VR  
DVD-RW  
+VR  
DVD-R  
DVD+RW  
DVD+R  
You can program the unit to record  
up to 8 programs within a month in  
advance. Daily or weekly program  
recordings are also available.  
• Be sure to set the clock before  
setting a timer programming.  
• Insert a recordable disc.  
5
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
Using [K / L], select the CH  
number to record. Press [B].  
ZOOM  
8
.@/:  
1
ABC  
2
DEF  
3
1
7
Timer Programming  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
Date  
Start  
End  
CH  
Mode  
PQRS  
TUV  
8
WXYZ  
9
1. JAN/01 12:57AM 1:57AM CH  
8
7
2.  
3
---  
DISPLAY  
SPACE  
CLEAR  
0
1
TITLE  
DISC MENU RETURN  
To record from external input,  
select E1 or E2.  
Press [TIMER PROG.].  
Timer Programming list will appear.  
2
3
4
5
6
7
Timer Programming  
6
Date  
---  
Start  
End  
CH  
Mode  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
Using [K / L], select a recording  
1.  
2.  
3.  
mode.  
RAPID PLAY PREV  
REC  
---  
---  
Timer Programming  
CM SKIP  
Date  
1. JAN/01 12:57AM 1:57AM CH  
2. ---  
Start  
End  
CH  
Mode  
HQ  
2
8
Using [K / L], select a program  
number. Press [OK].  
Refer to “Recording mode” on  
page 24.  
3
When “Auto” is selected as  
a recording mode, the unit  
determines how much time is  
available on the disc and record in  
the appropriate recording mode to  
complete recording the program.  
Using [K / L], enter the Date.  
Press [B].  
Timer Programming  
Date  
Start  
--:--  
End  
--:--  
CH  
E1  
Mode  
1. JAN/01  
2.  
3.  
---  
---  
Timer Programming  
Date  
1. JAN/01 12:57AM 1:57AM CH  
2. ---  
Start  
End  
CH  
Mode  
Auto  
When pressing [L] at the  
current date, the Date will  
change as follows.  
8
7
e.g. January 1st  
Press [OK] when all items are  
entered.  
JAN/01  
Your program setting will be  
stored.  
• To set another program, repeat  
steps 2 to 7.  
• To exit, press [TIMER PROG.]  
or [SETUP].  
• When two or more programs are  
overlapped, “Overlap” and the  
overlapped program number will  
appear.  
Daily  
MON-SAT  
MON-FRI  
SAT  
Note  
• If you have not set the  
clock yet:  
FRI  
A manual clock setting menu  
will appear instead of the  
Timer Programming list at  
step 1. Continue with the step  
3 in “Manual Clock Setting”  
on page 22 before setting a  
timer programming.  
• Press [s / B] to move the  
cursor to the left and the right  
in the timer programming  
menu.  
SUN  
JAN/31  
8
4
Press [STANDBY-ON] to set a  
Timer Programming.  
TIMER REC indicator will light up  
on the front panel.  
Using [K / L], enter the Start  
and End time. Press [B].  
Timer Programming  
Date  
Start  
End  
CH  
E1  
Mode  
1. JAN/01 12:57AM --:--  
• After step 8, the recording will  
start immediately after the  
recording time you set.  
2.  
3.  
---  
---  
EN  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Timer Recording (cont’d)  
Checking, canceling, or correcting the timer programming  
information  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
1
6
1
4
.@/:  
1
ABC  
2
DEF  
3
2
5
Press [STANDBY-ON].  
TIMER REC indicator will be off on  
the front panel.  
To clear the timer programming:  
Using [K / L], select the  
program. Press [CLEAR].  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
PQRS  
TUV  
8
WXYZ  
9
7
DISPLAY  
SPACE  
CLEAR  
0
To correct the timer program-  
ming:  
Using [K / L], select your desired  
program. Press [OK].  
Next, correct the timer  
2
TITLE  
DISC MENU RETURN  
Press [TIMER PROG.].  
Timer Programming  
4
Date  
1. JAN/01 12:57AM 1:57AM CH  
2. ---  
Start  
End  
CH  
Mode  
HQ  
8
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
programming by using [K / L /  
{
RAPID PLAY PREV  
REC  
/
B]. Finally, press [OK] again.  
Timer Programming list will appear.  
CM SKIP  
5
Press [TIMER PROG.] to exit.  
3
Check the information on the  
list you will need.  
6
Press [STANDBY-ON] to return  
to the timer standby mode.  
Note  
• Press [TIMER PROG.] to  
check the timer programming  
in process.  
To stop the Timer Recording in process  
Press [STOP C] on the front panel of the unit.  
[STOP C] on the remote control is not effective.  
When the Timer Recording is  
proceeding, that program will  
be highlighted with red. In this  
case, you cannot select any  
other program.  
If the timer program did not complete correctly, the error number  
appears in the Timer Programming list.  
Each error number means:  
Timer Programming  
E1-22  
Recording error other than  
E41  
Power failed  
Date  
Start  
End  
CH  
Mode  
E22  
E37-39 below  
JAN/01 12:57AM 1:57AM CH  
8
*
2.  
---  
---  
---  
---  
---  
---  
---  
E24  
Unrecordable disc  
E42  
E43  
E44  
No disc when recording  
Already 49 titles recorded  
3.  
4.  
5.  
6.  
7.  
8.  
E25-26 Copy prohibited program  
E29  
Disc protected  
Already 254 chapters  
recorded  
E30  
E35  
E36  
Disc full  
PCA full  
E45  
E46  
Copy prohibited program  
Press [CLEAR] to erase the  
selected program.  
It is impossible to record  
additionally on a disc  
recorded by other units  
when setting Replace Disc  
Menu to OFF.  
Already finalized Video  
format disc  
E40  
Some portion has not  
been recorded because  
of program overlapping.  
Recording did not start at  
the start time.  
• E23,E27,E28,E31,E32,E33 and E34 are not displayed.  
• A program with the error number is grayed and asterisked in the Timer Programming list.  
• Once the Timer Programming list with error line(s) is displayed, or after canceling and setting again the timer  
standby mode, the program line(s) with error will be cleared.  
EN  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Timer Recording (cont’d)  
Hints for Timer Recording  
• If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and  
all timer programming will be lost.  
• If a disc is not on the tray, TIMER REC indicator flashes and Timer Recording cannot be performed. In  
some cases, TIMER REC indicator will light up momentarily around the start point as the unit attempts to  
record. Please insert a recordable disc.  
•
When all the Timer Recording is completed, TIMER REC indicator flashes. To play or eject the recorded disc,  
press [STANDBY-ON] first, then select the recorded title and press [PLAY B] or [OPEN/CLOSE A].  
• During Timer Recording or timer standby mode (TIMER REC indicator will light up), any operations on the  
unit will not be available. To make these operations available, cancel the Timer Recording or timer standby  
mode first (TIMER REC indicator will be off).  
• To cancel the timer standby mode, press [STANDBY-ON].  
• When the Start and the End time are the same, the length of the recording will be set for 24 hours. When  
the disc reaches at the end during the recording, the unit turns itself off.  
• When the programmed Start and End time are earlier than the current time, the setting will not be accepted  
and be cleared for redoing.  
• If the Start time is earlier and the End time is later than the current time, the recording will start right after  
you turn the power off.  
The priority of overlapped settings  
This unit records the programs according to priority if the timer programmings are overlapped. The timer  
programming set previously has priority.  
A Timer Recording of lower priority will be canceled, start from the middle or stop on the way.  
Check the overlapped timer programmings and change the priority if necessary.  
When some programming have been made at  
the end time of the programming currently  
being recorded:  
A programming set previously has priority  
When the starting time is the same:  
A program set previously (PROG. A) has priority.  
A program set previously (PROG. B) has priority.  
PROG. A  
PROG. B  
PROG. A  
PROG. B  
PROG. C  
Actual  
recording  
Actual  
recording  
PROG. A  
PROG. B  
PROG. B  
The first 30 seconds (at the longest) will be cut off.  
The first 30 seconds (at the longest) will be cut off.  
When the recording time is partially overlapped:  
PROG. A will start after PROG. B is complete to  
be recorded.  
When the recording time is entirely overlapped:  
PROG.A will not be recorded.  
PROG. A  
PROG. A  
PROG. B  
Actual  
recording  
PROG. B  
Actual  
recording  
PROG. B  
PROG.B  
PROG.A  
The first 30 seconds (at the longest) will be cut off.  
Note for DVD recording  
When the End time of the programming  
currently being recorded and the Start time  
of the subsequent program are same:  
If PROG. A is a DVD recording program, the  
beginning of the PROG. B may be cut off.  
• When the recording time of two programs  
are overlapped, or the End time of a  
program and the Start time of another  
program is the same, the first 30 seconds  
(at the longest) of the subsequent program  
will be cut off.  
• If the cut-off portion comes up to one  
minute or more, this program will be  
displayed with error number E40 in the  
timer programming list.  
PROG. A  
PROG. B  
Actual  
recording  
PROG. A  
PROG. B  
The first 30 seconds (at the longest) will be cut off.  
EN  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Overwriting an existing title  
Overwriting from the beginning of the title  
+VR  
STANDBY-ON  
OPEN/CLOSE  
DVD+RW DVD-RW  
4
TIMER  
PROG.  
ZOOM  
Using [K / L], select a title to be  
overwritten. Press [OK].  
You can overwrite the existing title  
from the beginning.  
2
1
.@/:  
1
ABC  
2
DEF  
3
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
1
SP (2Hr)  
Play  
PQRS  
TUV  
8
WXYZ  
9
1
Edit  
Overwrite  
NOV/21/06 11:00AM CH12 SP  
NOV/21/06 0:20:44  
7
Press [STANDBY-ON].  
Make sure that the TV input is set  
on the unit.  
DISPLAY  
SPACE  
CLEAR  
2
0
TITLE  
DISC MENU RETURN  
4
5
5
2
Using [K / L], select  
2
“Overwrite”. Press [OK].  
Channel can be changed.  
Load the disc that includes a  
title to be overwritten.  
Title list will appear.  
If the title list does not appear,  
press [DISC MENU].  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
Selected title number  
to be overwritten  
3
6
RAPID PLAY PREV  
REC  
CM SKIP  
1
1
0:00:00  
DVD+RW  
7
CH 12  
1
SP (2Hr)  
NOV/21/06 11:00AM CH12 SP  
NOV/21/06 0:20:44  
2
SP(2Hr)  
2:00  
NOV/22/06 11:35AM CH13 EP  
NOV/22/06 0:10:33  
I
3
EMPTY TITLE  
1:37:52 SP(2Hr)  
6
Press [REC].  
Note  
Overwriting recording starts.  
The elapsed-time counter starts running.  
• Remaining time, which is  
This operation may take a  
while to be recognized.  
displayed on the bottom right  
corner of the screen during  
overwriting, indicates the  
remaining time at the time of  
starting overwriting.  
7
3
Press [STOP C] to stop recording.  
Title name is also overwritten.  
Using [REC MODE], select a  
recording mode.  
Refer to “Recording mode” on page 24.  
This operation may take a  
while to be recognized.  
Overwriting in the middle of the title  
+VR  
PQRS  
7
TUV  
8
WXYZ  
9
REPEAT  
SETUP  
OK  
DISPLAY  
SPACE  
CLEAR  
DVD+RW DVD-RW  
5
0
Press [REC].  
You can overwrite the existing title  
from the selected position.  
TITLE  
DISC MENU RETURN  
FI  
“
” mark, Display menu, CH, and  
2
3
the time lapse will be displayed as  
stated above.  
1
Proceed to steps 1 to 2 above.  
Channel can be changed.  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
2
RAPID PLAY PREV  
REC  
6
Using [K / L], select a title to be  
overwritten. Press [OK].  
CM SKIP  
Press [REC] again.  
Overwriting recording starts.  
4
7
5
6
3
7
Using [K / L], select “Play”.  
Press [OK].  
Note  
Press [STOP C] to stop  
recording.  
• Recording mode of the  
overwriting title is the  
same as that of the original  
(overwritten) title when  
overwriting in the middle of  
the title.  
Playback will start.  
Title name is not overwritten.  
4
This operation may take a  
while to be recognized.  
Press [PAUSE F] at the point  
from which you want to start  
overwriting.  
EN  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Overwriting an existing title (cont’d)  
Hints for Overwriting  
When an existing title is overwritten, the title name may be changed according to the overwriting situations.  
Before overwriting, read the following cases and Note.  
When overwriting title is shorter than the existing title:  
(Overwriting from the beginning of the title)  
Overwriting Title (A)  
Title name: A  
Existing Title (B)  
Title name: B  
After overwriting  
Title name: A  
Title name: B  
30 - 180 seconds will be cut off.  
When overwriting title is longer than the existing title:  
(Overwriting from the beginning of the title)  
Overwriting Title (A)  
Title name: A  
Existing Title (B)  
Title name: B  
Title name: A  
After overwriting  
Overwriting Title (A)  
Existing Title (B)  
Title name: A  
Title name: B  
Existing Title (C)  
After overwriting  
Title name: C  
Title name: A  
Title name: C  
30 - 180 seconds will be cut off.  
Note  
• When a title name is overwritten,  
its thumbnail is also overwritten.  
• When existing title is longer than  
the overwriting title, overwriting title  
is divided into 2 titles. If this is the  
case, there may be an unrecorded  
portion between titles.  
• A chapter mark is put between titles  
when overwriting in the middle of  
the title.  
When overwriting in the middle of the title:  
Overwriting Title (A)  
Title name: A  
Existing Title (B)  
Title name: B  
Title name: B  
After overwriting  
Title name: A  
Title name: B  
• “Auto Chapter” interval time is reset  
at the overwriting start point.  
30 - 180 seconds will be cut off.  
EN  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Settings for an external source  
Connection to an external source  
+VR  
DVD-RW  
+VR  
DVD-R  
DVD+RW  
DVD+R  
Connect the external source properly to the unit by using input jacks either EXT2 (Front) or EXT1 (Rear).  
When connecting an external equipment of monaural output to this unit, use AUDIO L jack of EXT2 (Front).  
Use commercially available S-Video or Video cable and an Audio cable for this connection.  
Another source  
OUTPUT  
OUTPUT  
(VCR camcorder etc.)  
S- VIDEO VIDEO AUDIO  
AUDIO VIDEO  
S -VIDEO  
L
R
R
L
or  
or  
Audio  
cable  
Video S-Video  
cable cable  
S-Video Video  
cable cable  
Audio  
cable  
or  
VIDEO IN  
S-VIDEO  
IN  
L
R
AUDIO IN  
To EXT 2 IN  
To EXT 1 IN  
Front of this unit  
Rear of this unit  
COMPONENT  
VIDEO OUTPUT  
VIDEO IN  
VIDEO OUT  
IN  
S-VIDEO  
Y
DIGITAL AUDIO OUTPUT  
PCM BITSTREAM  
IN  
OUT  
L
/
L
OUT  
P
B
R
/C  
/C  
B
R
R
R
ANTENNA AUDIO IN  
(E1)  
P
COAXIAL  
AUDIO OUT  
1.Press [SETUP].  
2.Using [K / L], select “Required Settings”. Press [OK].  
3.Using [K / L], select “Video Input”. Press [OK].  
Video Input  
E1 (Rear)  
E2 (Front)  
Video In  
Video In  
4.Using [K / L], select “E2 (Front)”. Press [OK].  
4.Using [K / L], select “E1 (Rear)”. Press [OK].  
Video Input - E2 (Front)  
Video Input - E1 (Rear)  
Video In  
Video In  
S-Video In  
S-Video In  
5.Using [K / L], select the input jack type to  
connect. Press [OK].  
5.Using [K / L], select the input jack type to  
connect. Press [OK].  
If you want to use VIDEO input (Composite) jack,  
If you want to use VIDEO IN (Composite) jack,  
select “Video In”.  
select “Video In”.  
If you want to use S-VIDEO input jack, select “S-  
Video In”.  
If you want to use S-VIDEO IN jack, select “S-  
Video In”.  
Video Input  
Video Input  
E1 (Rear)  
E2 (Front)  
Video In  
E1 (Rear)  
E2 (Front)  
S-Video In  
Video In  
S-Video In  
6.Press [SETUP] to exit.  
6.Press [SETUP] to exit.  
EN  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Settings for an external source (cont’d)  
Recording from an external source  
+VR  
DVD-RW  
+VR  
DVD-R  
DVD+RW  
DVD+R  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
Before recording from an external source, see the instructions for the  
connection on page 34.  
2
3
1
4
.@/:  
1
ABC  
2
DEF  
3
1.Turn the TV and this unit on, and be sure to select the input of the  
TV to which the unit is connected.  
Refer to the table on page 13.  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
PQRS  
TUV  
8
WXYZ  
9
7
DISPLAY  
SPACE  
CLEAR  
2.Press [OPEN/CLOSE A] to open the disc tray. Place the disc to  
0
record properly.  
TITLE  
DISC MENU RETURN  
3.Press [OPEN/CLOSE A] to close the disc tray.  
This operation may take a while to be recognized.  
4.Select the input of the unit which the external equipment is  
connected. (E2 or E1)  
• To use the input jacks on the back of this unit, select “E1 (Rear)”  
position by pressing [0], [0], [1] with the Number buttons on the remote  
control.  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
5
RAPID PLAY PREV  
REC  
CM SKIP  
• To use the input jacks on the front of this unit, select “E2 (Front)”  
position by pressing [0], [0], [2] with the Number buttons on the remote  
control.  
2 3  
8 1  
5.Select a recording mode by pressing [REC  
MODE].  
HQ  
SPP  
SP  
(2Hr) (2.5Hr)  
(1Hr)  
Refer to “Recording mode” on page 24.  
SLP  
(6Hr)  
EP  
(4Hr)  
LP  
(3Hr)  
6.Press [RECORD] on the unit to start  
recording.  
7.Press “Play” on the external source to record from.  
8.Press [STOP C] on the unit to stop recording.  
6
This operation may take a while to be completed.  
Setting a disc to protect  
+VR  
DVD-R  
DISPLAY  
TITLE  
SPACE  
CLEAR  
SETUP  
OK  
+VR  
DVD-RW  
0
DVD+RW  
DVD+R  
1
DISC MENU RETURN  
To prevent accidental recording,  
editing or erasing the titles, you  
can protect them from the Setting  
menu.  
Confirmation window will appear.  
2
3
4
Disc Protect OFF ON  
Yes  
No  
REC MODE  
REV  
PLAY  
FWD  
1
Press [SETUP].  
Note  
To cancel the disc protect:  
• When you insert a disc  
protected with this unit,  
“Disc Protect ON OFF” will  
appear instead of “OFF ON”.  
2
4
Using [K / L], select “Disc Edit”.  
Press [OK].  
Using [K / L], select “Yes”.  
Press [OK].  
Disc menu will appear.  
A disc will be protected.  
Disc Protect ON OFF  
This operation may take  
a while to be completed.  
3
Yes  
No  
Using [K / L], select “Disc  
Protect OFF ON”. Press [OK].  
To release the protect for the  
disc, select “Disc Protect  
ON OFF” at step 3, then  
select “Yes”.  
EN  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Playing the discs in other DVD players  
Finalizing a disc  
+VR  
+VR  
To cancel finalizing...  
DVD+R  
DVD-RW DVD-R  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
(DVD-RW only)  
You will need to finalize discs to  
play in other DVD players.  
Finalizing may take several  
minutes up to an hour.  
A shorter recording period on  
the disc will require a longer time  
period for finalization. Do not  
unplug the power cord during  
finalization.  
.@/:  
1
ABC  
2
DEF  
3
• To cancel finalizing at step 4,  
press [STOP C], select “Yes”  
with [{ / B], then press [OK].  
Finalizing is canceled and the  
unit will be in stop mode.  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
PQRS  
TUV  
8
WXYZ  
9
7
DISPLAY  
SPACE  
CLEAR  
0
1
TITLE  
DISC MENU RETURN  
4
Do you want to cancel ?  
Yes No  
2
3
4
Details are on page 25.  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
1
RAPID PLAY PREV  
REC  
Press [SETUP].  
Finalizing  
5%  
CM SKIP  
2
4
• If  
appears when pressing  
Using [K / L], select “Disc Edit”.  
Press [OK].  
[STOP C], you cannot cancel  
finalizing because the finalizing  
has been in certain progress.  
• When selecting “No” and  
press [OK] or [RETURN ] ,  
finalizing will be continued.  
• You cannot cancel finalizing the  
DVD+R/DVD-R disc once it has  
started.  
Disc menu will appear.  
3
Using [K / L], select “Finalize”.  
Press [OK].  
Confirmation window will appear.  
Finalize  
Yes  
No  
This operation may take a  
while to be completed.  
5
Note  
Finalizing is completed.  
• Once you have finalized a  
disc recorded on DVD+R/  
DVD-R, you cannot edit or  
record anything on that disc.  
• There is no need to finalize  
DVD+RW discs.  
• When you insert a DVD-RW  
disc finalized with this unit,  
“Undo Finalize” will appear  
instead of “Finalize”.  
4
Using [K / L], select “Yes”.  
Press [OK].  
Finalizing will start.  
Finalizing  
100%  
Disc Edit  
Finalizing  
90%  
Edit Disc Name  
Disc Protect OFF ON  
Erase Disc  
Undo Finalize  
To release the finalizing  
for the disc, select “Undo  
Finalize” at step 3.  
* DO NOT power off during  
finalization, this will result in  
malfunction.  
EN  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Playing the discs in other DVD players (cont’d)  
Auto finalizing  
+VR  
+VR  
DVD+R  
You can finalize discs  
DVD-RW DVD-R  
4
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
Using [K / L], select “Disc Full”  
or “End of Timer Rec”. Press  
[OK].  
.@/:  
1
ABC  
2
DEF  
3
automatically using Auto Finalize  
function. You can use this function  
to finalize discs after finishing all  
Timer Recordings and at the end  
of the disc space.  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
Option window will appear.  
4
5
6
PQRS  
TUV  
8
WXYZ  
9
7
Auto Finalize - Disc Full  
DISPLAY  
SPACE  
CLEAR  
0
ON  
1
6
TITLE  
DISC MENU RETURN  
OFF  
1
Press [SETUP].  
2
3
4
5
Auto Finalize - End of Timer Rec  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
2
ON  
OFF  
Using [K / L], select  
“Recording”. Press [OK].  
Recording menu will appear.  
RAPID PLAY PREV  
REC  
CM SKIP  
5
3
Using [K / L], select “ON”.  
Press [OK].  
Your setting will be activated.  
Using [K / L], select “Auto  
Finalize”. Press [OK].  
Auto Finalize menu will appear.  
6
Auto Finalize  
Press [SETUP] to exit.  
Disc Full  
OFF  
OFF  
End of Timer Rec  
EN  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Information on DVD play  
Before you play DVD discs, read the following information.  
in the NTSC system. You cannot play DVDs recorded in  
other color system .  
Playable discs  
This unit is compatible to play the following discs.  
To play a DVD, make sure that it meets the  
requirements for Region Codes and Color Systems  
as described below. Discs that have the following  
logos will play on the unit. Other disc types are not  
guaranteed to play.  
Region codes  
This unit has been designed to play DVD discs  
with Region One (1). DVDs must be labeled for  
ALL regions or for Region 1 in order to play on the  
unit. You cannot play DVDs that are labeled for  
other regions. Look for the symbols on the right on  
your DVDs. If these region symbols do not appear  
on your DVD, you cannot play the DVD in this unit.  
Disc  
Logo  
DVD-VIDEO  
The number inside the globe refers to region of the world.  
A DVD labeled for a specific region can only play on the  
unit with the same region code.  
DVD+RW  
DVD+R  
PBC (Playback Control) for Video CD  
This unit conforms to ver.1.1 and ver. 2.0 of Video CD  
standard with PBC function.  
DVD+R Double Layer  
Ver.1.1 (without PBC function): You can enjoy playback  
picture as well as music CD.  
DVD-RW  
Ver.2.0 (with PBC function): While using a Video CD with  
PBC function, “PBC” appears on the screen.  
NOTE: When playing Video CDs with PBC function, some  
operations (e.g., track search and repeat tracks) cannot  
be performed. Cancel PBC function temporarily to perform  
those operations (refer to page 70).  
(VIDEO mode, Finalized)  
DVD-R  
(VIDEO mode, Finalized)  
CD-DA (AUDIO CD)  
Video CD  
You can play interactive software using menu screens.  
Refer to instructions in the Video CD.  
Hint for DVD playback  
The contents of DVD disc are generally divided into titles.  
Titles may be further subdivided into chapters.  
CD-RW (CD-DA FORMAT,  
MP3 files)  
CD-R (CD-DA FORMAT,  
MP3 files)  
Start Rec.  
Title 1  
Stop/Start  
Stop Rec.  
is a trademark of DVD Format/Logo Licensing Corporation.  
Title 2  
Color systems  
DVDs are recorded in different color systems throughout  
the world. The most common color system is NTSC (which  
is used primarily in the United States and Canada).  
This unit uses NTSC, so DVDs you play must be recorded  
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2  
Guide to displays  
Press [DISPLAY] to call up the  
Display menu. This menu will  
give you the information on the  
playing disc. Some operations are  
available while disc is playing.  
1.Indicates a disc type and a  
format mode. (Format mode is  
5.Each icon means:  
: Search  
: Audio  
displayed with DVD-RW/DVD-R  
(Video mode) discs inserted.)  
NOTE: In some descriptions on  
this manual, only one disc type  
is indicated as an example.  
2.Indicates a channel number.  
3.Indicates a recording mode and  
possible recording time left.  
4.Indicates a title number, chapter  
number and the time lapse of  
disc play.  
: Subtitle  
4
1
: Angle  
1
1
0:00:00  
DVD+RW  
: Repeat  
CH  
2
: Marker  
5
2
: Noise Reduction  
: Zoom  
: Surround  
HQ(1Hr)  
1:01  
6.Indicates current disc status.  
6
3
EN  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                        
                                          
                                             
                                               
                                                  
DV  
                                                          
                                                            
                                                              
-
                                                                 
DVD++RR  
Playing discs  
Basic playback  
Playback  
DVD+RW  
1
Turn the TV on and be sure to  
select the input to which the unit is  
connected.  
+VR  
DV -RW  
D
+VR  
DVD-R  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
Pop-up window will appear.  
2
4
7
1
4
.@/:  
1
ABC  
2
DEF  
3
Press [STANDBY-ON].  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
1
SP (2Hr)  
Play  
Edit  
Overwrite  
4
5
6
NOV/21/06 11:00AM CH12 SP  
NOV/21/06 0:20:44  
PQRS  
TUV  
8
WXYZ  
9
7
2
DISPLAY  
SPACE  
CLEAR  
NOV/22/06 11:35AM CH13 EP  
NOV/22/06 0:10:33  
0
TITLE  
DISC MENU RETURN  
3
2
EMPTY TITLE  
1:37:52 SP(2Hr)  
Press [OPEN/CLOSE A] .  
The disc tray will open.  
5
If you want to see Disc  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
6
information, press [{ ] when  
the first page of the title list is  
displayed or press [ K ] when  
the first title is selected but  
“Play”, “Edit” or “Overwrite” is not  
highlighted.  
3
RAPID PLAY PREV  
REC  
Insert your disc with its label fac-  
ing up. Align the disc to the disc  
tray guide.  
CM SKIP  
4
7
When inserting <DVD+RW> disc.  
1.Disc name  
(Default “No Disc Name”)  
2.Disc Type  
(DVD+RW/DVD+R/DVD-RW/  
DVD-R)  
3.Total number of title  
(include “Empty Title”)  
4.Total time of recorded disc  
space  
disc tray  
guide  
No Disc Name  
Disc  
DVD+RW  
3
Total Titles  
Disc Space Used  
Disc Protect  
Make Edits Compatible  
0:30:48  
OFF  
Needed  
4
Press [OPEN/CLOSE A] to close  
the disc tray.  
When inserting  
<DVD+R/DVD-RW/DVD-R> disc.  
5.Status of disc protection  
(“ON” is protected disc.)  
6.Making edits compatible/  
Finalize  
This operation may take a  
while to be recognized.  
Title list will appear automatically.  
No Disc Name  
• When DVD+RW disc is  
inserted:  
Disc  
DVD+R  
5
1
SP (2Hr)  
Total Titles  
Disc Space Used  
Disc Protect  
Finalize  
1:30:48  
OFF  
NOV/21/06 11:00AM CH12 SP  
NOV/21/06 0:20:44  
If edit for which “Make Edits  
Compatible” is necessary is  
done, “Needed” is displayed.  
“Not Needed” is not necessary.  
• When DVD+R, DVD-RW or  
DVD-R disc is inserted:  
If “Finalize” is done, “Finalized”  
is displayed. Otherwise,  
“Unfinalized” is displayed.  
Finalized  
2
NOV/22/06 11:35AM CH13 EP  
NOV/22/06 0:10:33  
3
EMPTY TITLE  
1:37:52 SP(2Hr)  
6
Using [K / L], select “Play”.  
Press [OK].  
Playback will start.  
If you want to return to the  
playback while you are stopping  
temporarily, press [TITLE] to  
resume play.  
To exit the title list, press  
[STOP C].  
7
Note  
Press [STOP C] to stop play-  
back.  
To eject the disc, press [OPEN/  
CLOSE A] to open the disc tray,  
then remove the disc before  
turning the unit off.  
• Some discs may start  
playback automatically.  
• You can also start playback  
5
by pressing [PLAY B]  
Using [K / L], select a desired  
title. Press [OK].  
instead of [OK] at step 5.  
• Press [B] to display the  
next page, and press [{] to  
display the previous page.  
EN  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Basic playback (cont’d)  
STANDBY-ON  
OPEN/CLOSE  
Video  
DVD-RW  
Video  
DVD-R  
TIMER  
PROG.  
ZOOM  
CD  
Video CD  
DVD-V  
2
1
.@/:  
1
ABC  
2
DEF  
3
1
4
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
Press [STANDBY-ON].  
Press [PLAY B] to start play-  
back.  
4
5
6
PQRS  
TUV  
8
WXYZ  
9
Turn the TV on and be sure to  
select the input to which the unit is  
connected.  
7
Playback will start.  
DISPLAY  
SPACE  
CLEAR  
0
TITLE  
DISC MENU RETURN  
If you are playing a DVD-Video  
disc or Video CD with PBC  
function, a menu may appear.  
Refer to page 41 for details about  
a disc menu.  
If you are playing a finalized DVD-  
R/DVD-RW disc, a title list will  
appear.  
2
Press [OPEN/CLOSE A] to open  
the disc tray.  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
4
5
The disc tray will open.  
RAPID PLAY PREV  
REC  
CM SKIP  
3
Insert your disc with its label fac-  
ing up. Align the disc to the disc  
tray guide.  
Note  
5
• Some discs may start  
playback automatically.  
• You can select images or  
information on the menu  
screen by activating PBC  
(Playback control) function  
(page 70).  
Press [STOP C] to stop play-  
back.  
Playing MP3 disc  
MP3  
1
Hints for MP3 files:  
In stop mode, press [TITLE] to  
call up the MP3 menu.  
• Folders are known as Groups,  
files are known as Tracks.  
• Folders are accompanied by  
icon.  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
File List  
ZOOM  
DISC NAME  
3
• MP3 files are accompanied by  
icon.  
.@/:  
1
ABC  
2
DEF  
3
FOLDER NAME 1  
FOLDER NAME 2  
FOLDER NAME 3  
FOLDER NAME 4  
FOLDER NAME 5  
FOLDER NAME 6  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
Reproduction will start from the  
selected track and go to the next  
one in turn.  
• The system can recognize up to  
255 groups (or folders) and up  
to 999 tracks.  
• The name of group and track  
can be displayed in up to 29  
characters. Unrecognizable  
characters will be replaced with  
asterisks.  
• If there are no files in the folder,  
“No Files” will be displayed.  
4
5
6
PQRS  
TUV  
8
WXYZ  
9
7
DISPLAY  
SPACE  
CLEAR  
3
1 FILE NAME 1  
2 FILE NAME 2  
0
3
TITLE  
DISC MENU RETURN  
1/2  
1
2
• To exit the menu, press  
[TITLE] again.  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
2
RAPID PLAY PREV  
REC  
Press [K / L] to select a desired  
folder (group) or track. Press  
[OK].  
CM SKIP  
We recommends the files record-  
ed under the following  
circumstances is played back:  
• Sampling frequency: 44.1kHz or  
48kHz.  
Note  
When selecting track:  
Playback will start.  
• The audio source of MP3 files  
cannot be recorded as digital  
sound by an MD or DAT  
deck.  
When selecting the folder:  
• Constant bit rate: 112kbps -  
320kbps.  
The files in folder will appear.  
Press [K / L] to select the track or  
folder you want, then press [OK].  
• Files whose extension is other  
than “.mp3(MP3)” will not be  
listed in the MP3 menu.  
• Some unplayable folders  
or tracks may be listed in  
the MP3 menu due to the  
recording status.  
• Press [PLAY B], [OK] or [B] to  
move to the lower hierarchies.  
• Press [s] or [RETURN ] to the  
previous hierarchy.  
EN  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Basic playback (cont’d)  
Playing discs using the disc menu  
DVD-V  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
A DVD disc contains a disc menu  
that describes the contents or  
allows you to customize the  
playback. For example, the menu  
may offer choices for subtitle  
languages, special features, or  
chapter selection.  
Sometimes these are displayed  
automatically when you start  
playback, otherwise only appear  
when you press [DISC MENU].  
Continue this step to set up all  
the features you want or to start  
playing the disc from the menu.  
.@/:  
1
ABC  
2
DEF  
3
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
DISC MENU button:  
2
PQRS  
TUV  
8
WXYZ  
9
Displays a DVD disc menu which  
varies with the disc and may be  
the same as the ‘Title list.’  
7
DISPLAY  
SPACE  
CLEAR  
0
TITLE  
DISC MENU RETURN  
Cursor K / L / { / B buttons:  
Moves the cursor around screen.  
1
2
3
OK button:  
Selects the currently highlighted  
menu option.  
2
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
1
RAPID PLAY PREV  
REC  
Press [DISC MENU].  
Disc menu will appear.  
If the feature is not available,  
may appear on the TV screen.  
Number buttons:  
Selects a numbered menu option  
(some discs only). (Press [OK]  
later.)  
CM SKIP  
Note  
• Menus vary among discs.  
Refer to the information  
accompanying the disc for  
details.  
3
2
Press [DISC MENU] to exit the  
disc menu.  
Using [K / L / { / B], select an  
item. Press [OK] to confirm.  
Playing discs using the title menu  
DL  
+VR  
+VR  
DVD-R  
DVD-V  
Video  
DVD+RW  
Video  
DVD+R  
DVD+R  
DVD-RW  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
DVD-RW  
DVD-R  
.@/:  
1
ABC  
2
DEF  
3
Some DVDs have a title menu,  
which lists the titles available on  
them. It helps you to start playback  
at a specific title.  
Cursor K / L / { / B buttons:  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
Moves the cursor around screen.  
4
5
6
2
OK button:  
Selects the currently highlighted  
menu option.  
PQRS  
TUV  
8
WXYZ  
9
7
DISPLAY  
SPACE  
CLEAR  
0
1
TITLE  
DISC MENU RETURN  
Number buttons:  
Selects a numbered menu option  
(some discs only). (Press [OK] later.)  
Press [TITLE].  
1
2
3
The title menu will appear.  
If the feature is not available,  
may appear on the TV screen.  
2
3
Press [TITLE] to exit the title  
menu.  
Note  
2
• [TITLE] will not always be  
active with all DVDs.  
• Menus vary among discs.  
Refer to the information  
accompanying the disc for  
details.  
Using [K / L / { / B], select a  
title to play. Press [OK].  
Play will begin at the title you  
selected.  
For Video CDs:  
When “PBC (Video CD only)” in  
the CD Playback Mode menu is  
“ON” and the display menu is not  
displayed, the Video CD main menu  
will appear when inserting a disc or  
press [RETURN ] during playback.  
TITLE button:  
Displays the ‘Title menu’ of a DVD  
disc which varies with the disc.  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
Pause  
RAPID PLAY PREV  
REC  
2
1
+VR  
DVD-RW  
+VR  
DVD-R  
DL  
DVD+R  
DVD-V  
Video  
DVD+RW  
Video  
DVD+R  
CM SKIP  
DVD-RW  
Video CD  
DVD-R  
CD  
CD  
MP3  
Note  
•
On DVDs, set “Still Mode” to  
“Field” in the Setup menu if  
F
1
During playback, press  
pictures in the pause mode are  
blurred. (Refer to Page 68.)  
[PAUSE F].  
Play will pause and sound will be  
muted.  
2
Press [PLAY B] to resume play.  
EN  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Special playback  
Resume play  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
+VR  
DVD-RW  
+VR  
DVD-R  
DL  
DVD+R  
RAPID PLAY PREV  
REC  
2
DVD-V  
Video  
DVD+RW  
Video  
DVD-R  
DVD+R  
CM SKIP  
DVD-RW  
Video CD  
CD  
CD  
MP3  
1
2
You can resume play from where  
you stopped playing the disc last.  
In a few seconds, play will resume  
from the point at which it stopped  
last. You can resume play at the  
same point even if you turn off the  
unit.  
Note  
1
• For MP3 files, playback will  
During playback, press [STOP C].  
The resume message will appear.  
resume from the beginning of  
the track at which playback  
was stopped.  
• Some Video CDs with  
the PBC function resume  
playback from the beginning  
of the track.  
To cancel the resume play and  
start playing the disc from the  
beginning, press [STOP C] the  
second time while the play is  
stopped.  
Resume ON  
2
Press [PLAY B].  
Fast forward / Fast reverse  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
+VR  
DVD-RW  
+VR  
DVD-R  
DL  
DVD+R  
1
RAPID PLAY PREV  
REC  
DVD-V  
Video  
DVD+RW  
Video  
DVD+R  
CM SKIP  
DVD-RW  
Video CD  
DVD-R  
CD  
CD  
MP3  
1
Note  
During playback, press [FWD D] or [REV E].  
• Forward/reverse speed will  
Every time you press [FWD D] or [REV E], approximate speed will be  
changed as follows.  
Fast forward or fast reverse playback across titles (for DVD discs) or  
tracks (for MP3) is not possible.  
be indicated with icons as  
follows.  
Forward (Approx. Speed)  
x2:  
x20:  
x40:  
Normal  
speed  
Reverse (Approx. Speed)  
x5:  
x20:  
x40:  
x40  
x20  
x5  
x2  
x20  
x40  
playback  
For Video CDs, approximate forward/reverse speeds are x2, x8, x16.  
For Audio CDs and MP3 files, approximate speed is fixed at x8 with  
sound.  
To return to the normal play, press [PLAY B].  
Skipping TV commercials during play  
.@/:  
1
ABC  
2
DEF  
3
+VR  
+VR  
DVD-R  
DL  
DVD+R  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
DVD+RW  
Video  
DVD+R  
DVD-RW  
DVD-V  
Video  
4
5
6
PQRS  
TUV  
8
WXYZ  
9
DVD-RW  
DVD-R  
7
DISPLAY  
SPACE  
CLEAR  
You can skip TV commercials by  
pressing [CM SKIP], so that you  
can enjoy the recorded programs  
without interrupting.  
You can press up to 6 times (180  
seconds).  
e.g. Press [CM SKIP] once.  
0
TITLE  
DISC MENU RETURN  
CM Skip 30 sec.  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
1
During playback, press [CM SKIP].  
Normal play will start at 30  
seconds ahead from the point you  
press [CM SKIP].  
(forwarding 30 seconds)  
RAPID PLAY PREV  
REC  
CM SKIP  
1
Every time you press [CM SKIP],  
the searching point will be  
extended by 30 seconds ahead.  
B
Playback will restart automatically.  
EN  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Special playback (cont’d)  
Rapid play  
PQRS  
7
TUV  
8
WXYZ  
9
REPEAT  
SETUP  
OK  
+VR  
DVD-RW  
DVD-RW  
+VR  
DVD-R  
DL  
DVD+R  
DISPLAY  
SPACE  
CLEAR  
DVD-V  
Video  
DVD+RW  
Video  
DVD-R  
DVD+R  
0
TITLE  
DISC MENU RETURN  
DVD-RW  
B
:
:
:
Press [RAPID PLAY] once  
during playback.  
Plays back approximately  
at 0.8 times of normal  
playback.  
Rapid Play function is available  
only during playback.  
Available only on discs recorded  
in the Dolby Digital format, Rapid  
Play plays back in a slightly  
faster/slower speed while keeping  
the sound quality just as normal  
playback.  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
B
Press [RAPID PLAY]  
twice during playback.  
Plays back approximately  
at 1.3 times of normal  
playback.  
RAPID PLAY PREV  
REC  
2
1
CM SKIP  
1
Note  
B
Press [RAPID PLAY]  
three times to play back in  
normal speed.  
During playback, press  
[RAPID PLAY].  
• Audio (language) setting  
cannot be changed while  
using this mode.  
• This feature may not work at  
some point in a disc.  
• Audio is PCM during Rapid  
play mode.  
No effects.  
2
Press [PLAY B] to continue the  
normal playback.  
Step by step playback  
DISPLAY  
TITLE  
SPACE  
0
CLEAR  
SETUP  
OK  
+VR  
DVD-RW  
DVD-RW  
+VR  
DVD-R  
DL  
DVD+R  
DISC MENU RETURN  
DVD-V  
Video  
DVD+RW  
Video  
DVD+R  
DVD-RW  
Video CD  
DVD-R  
To play step by step backward:  
Press [PREV H] repeatedly.  
Every time you press the button,  
the play will go backward by one  
frame.  
1
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
3
1
During playback, press [PAUSE F].  
Play will pause and sound will be  
muted.  
RAPID PLAY PREV  
REC  
CM SKIP  
2
• Press and hold  
[PREV H] / [NEXT G] to  
reverse/ advance continuously.  
2
Note  
F
• Only step by step forward  
playback is available for  
playing back Video CDs.  
3
Press [PLAY B] to continue the  
Press [NEXT G] repeatedly.  
The play will advance one frame  
(or step) at a time when you press  
[NEXT G] with the sound muted.  
normal playback.  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
Slow forward / Slow reverse play  
DL  
1
RAPID PLAY PREV  
REC  
+VR  
+VR  
DVD-R  
DVD-V  
Video  
DVD+RW  
Video  
DVD+R  
DVD+R  
DVD-RW  
CM SKIP  
DVD-RW  
Video CD  
DVD-R  
Note  
• Forward/reverse speed will  
1
be indicated with icons as  
During playback, press [PAUSE F]. Then press [FWD D] or [REV E].  
Every time you press [FWD D] or [REV E], approximate speed will be  
changed as follows. (The sound will remain muted.)  
follows.  
Forward (Approx. Speed)  
x1/16:  
x1/8:  
x1/3:  
Reverse (Approx. Speed)  
x1/16:  
x1/8:  
x1/4:  
Pause  
x1/4  
x1/8  
x1/16  
x1/16  
x1/8  
x1/3  
• Only slow forward playback  
is available for playing back  
Video CDs.  
To return to the normal play, press [PLAY B].  
EN  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Special playback (cont’d)  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
Zoom  
ZOOM  
+VR  
DVD-RW  
DVD-RW  
+VR  
DVD-R  
DL  
DVD+R  
.@/:  
1
ABC  
2
DEF  
3
1
DVD-V  
Video  
DVD+RW  
Video  
DVD+R  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
DVD-RW  
Video CD  
DVD-R  
PQRS  
TUV  
8
WXYZ  
9
7
DISPLAY  
SPACE  
CLEAR  
1
3
0
During playback, press  
[DISPLAY] or [ZOOM].  
Display menu will appear.  
Using [K / L], select a desired  
zoom factor to zoom. Press  
[OK].  
TITLE  
DISC MENU RETURN  
The zoom area will be displayed.  
1
1
0:00:00  
DVD-Video  
2
3
4
REC MODE  
REV  
PLAY  
FWD  
RAPID PLAY PREV  
PAUSE  
NEXT  
2
[OK].  
Using [{ / B], select  
. Press  
Note  
• When selecting a smaller  
factor than the current one,  
the zoom area will not be  
displayed.  
Zoom menu will appear.  
1
1
0:00:00  
DVD-Video  
• To exit the zoom menu, press  
[DISPLAY] or [ZOOM] again  
at step 1.  
• To cancel the zoom function,  
select “x1.0” using [K / L],  
then press [OK].  
1.2  
1.5  
2.0  
4
Using [K / L / { / B], select a  
desired zoom position. Press  
[OK].  
There are four options  
The zoom play will start.  
(x1.0, x1.2, x1.5 and x2.0), these  
are displayed excluding the current  
zoom rate.  
Marker Setup  
.@/:  
1
ABC  
2
DEF  
3
+VR  
DVD-RW  
DVD-RW  
+VR  
DVD-R  
DL  
DVD+R  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
DVD-V  
Video  
DVD+RW  
Video  
DVD+R  
4
5
6
PQRS  
TUV  
8
WXYZ  
9
DVD-RW  
Video CD  
DVD-R  
CD  
CD  
7
DISPLAY  
SPACE  
CLEAR  
This feature allows you to assign a  
specific point on a disc to be called  
back later.  
When inserting <Audio CD> disc.  
0
1
TITLE  
DISC MENU RETURN  
1
0:00:00  
Audio CD  
1
2
3
4
5
6
2
3
4
1
During playback, press  
[DISPLAY].  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
RAPID PLAY PREV  
REC  
Display menu will appear.  
3
CM SKIP  
1
1
0:00:00  
DVD-Video  
Using [K / L], select a desired  
marker number. When it reaches  
the desired point, press [OK].  
The title (track) number and the  
time will be displayed.  
Note  
• To clear a marker, select the  
marker number to be cleared,  
then press [CLEAR].  
• All markers will be erased  
when you operate these  
operations listed below.  
– Opening the disc tray  
– Turning off the power  
– Recording to a recordable  
disc  
2
Using [{ / B], select  
.
4
Press [OK].  
Marker setup menu will appear.  
To return to the marker later:  
Using [K / L], select the desired  
marker number. Press [OK].  
When inserting <DVD-Video> disc.  
1
1
0:00:00  
DVD-Video  
• You can mark up to 6 points.  
• Marker Setup is not available  
when you play the Video CD  
with PBC function.  
1
2
3
4
5
6
EN  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Search  
Title/Chapter search  
.@/:  
1
ABC  
2
DEF  
3
+VR  
DVD-RW  
DVD-RW  
+VR  
DVD-R  
DL  
DVD+R  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
DVD-V  
Video  
DVD+RW  
Video  
DVD+R  
4
5
6
PQRS  
TUV  
8
WXYZ  
9
DVD-RW  
DVD-R  
7
DISPLAY  
SPACE  
CLEAR  
Using [PREV H] / [NEXT G]  
0
TITLE  
DISC MENU RETURN  
1
During playback, press [NEXT G] to skip the current title or chap-  
ter and move to the next.  
The title or chapter will move forward by one at a time.  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
• If there is no chapter in one title, the current title will be skipped.  
RAPID PLAY PREV  
REC  
CM SKIP  
1
To go back to the beginning of the current title or chapter, press  
[PREV H].  
Press it repeatedly to go to the previous title or chapter. The title or  
chapter will move backward one title at a time.  
Using [DISPLAY]  
STANDBY-ON  
ZOOM  
OPEN/CLOSE  
TIMER  
PROG.  
1
.@/:  
1
ABC  
2
DEF  
3
During playback, press [DISPLAY].  
Display menu will appear.  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
2
1
1
1
0:00:00  
DVD-Video  
PQRS  
TUV  
8
WXYZ  
9
7
DISPLAY  
SPACE  
CLEAR  
0
TITLE  
DISC MENU RETURN  
2
2
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
Using [{ / B], select  
. Press [OK].  
will be highlighted.  
RAPID PLAY PREV  
REC  
The number next to  
CM SKIP  
Title:  
Using [K / L] or the Number buttons, enter a desired title number to  
search. Press [OK].  
Title search will start.  
Chapter:  
Press [B] to move to the number next to  
for chapter.  
Using [K / L] or the Number buttons, enter a desired chapter  
number to search. Press [OK].  
Chapter search will start.  
Note  
01 /01  
001/028  
00:00:00/02:18:33  
• In search mode display, total  
numbers of each search contents  
(title/chapter/time) are shown as a  
denominator.  
Total time  
of the disc  
Total number  
of titles  
Total number  
of chapters  
EN  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Search (cont’d)  
Track search  
CD  
Video CD  
MP3  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
Using [PREV H] / [NEXT G]  
RAPID PLAY PREV  
REC  
1
CM SKIP  
1
1
During playback, press [NEXT G] to skip the current track and  
move to the next.  
The track will move forward one at a time.  
To go back to the beginning of the current track, press [PREV H].  
Press it repeatedly to go to the previous track. The track will move  
backward one at a time.  
STANDBY-ON  
ZOOM  
OPEN/CLOSE  
TIMER  
PROG.  
Using [DISPLAY]  
.@/:  
1
ABC  
2
DEF  
3
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
2
3
1
4
5
6
PQRS  
TUV  
8
WXYZ  
9
During playback, press [DISPLAY].  
7
Display menu will appear.  
DISPLAY  
SPACE  
CLEAR  
0
When inserting <Audio CD> disc.  
When inserting <MP3 files> disc.  
TITLE  
DISC MENU RETURN  
1
0:00:00  
Audio CD  
1
0:00:00  
MP3  
Note  
2
• During CD playback you can  
enter a track number directly  
using the Number buttons  
for track search without  
Using [{ / B], select  
. Press [OK].  
will be highlighted.  
The number next to  
3
displaying the menu.  
Using [K / L] or the Number buttons, enter a desired track number  
to search. Press [OK].  
• Track search is not available  
when you play the Video CD  
with PBC function.  
Track search will start.  
Time search  
+VR  
DVD-RW  
DVD-RW  
+VR  
DVD-R  
DL  
DVD+R  
DVD-V  
Video  
DVD+RW  
Video  
DVD+R  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
DVD-RW  
Video CD  
DVD-R  
CD  
CD  
.@/:  
1
ABC  
2
DEF  
3
2
3
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
1
2
4
5
6
During playback, press  
[DISPLAY].  
Using [{ / B], select  
Press [OK].  
.
PQRS  
TUV  
8
WXYZ  
9
7
DISPLAY  
SPACE  
CLEAR  
Display menu will appear.  
The number next to  
highlighted.  
To move to the number next to  
press [B].  
will be  
0
1
TITLE  
DISC MENU RETURN  
When inserting <DVD-Video> disc.  
,
1
1
0:00:00  
DVD-Video  
When time search is not available,  
and time counter are not  
displayed.  
Note  
•
Time search function is available  
only in the same track or title.  
When inserting <Audio CD> disc.  
3
1
0:00:00  
Audio CD  
Using [K / L] or the Number  
buttons, enter a desired time to  
search. Press [OK].  
Time search will start.  
• Time search is not available  
when you play the Video CD  
with PBC function.  
EN  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Repeat/Random/Program playback  
Repeat playback  
+VR  
DVD-RW  
+VR  
DVD-R  
DL  
DVD+R  
DVD-V  
Video  
DVD+RW  
Video  
DVD+R  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
DVD-RW  
Video CD  
DVD-R  
CD  
CD  
MP3  
.@/:  
1
ABC  
2
DEF  
3
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
1
3
4
5
6
During playback, press  
[DISPLAY] or [REPEAT].  
Display menu will appear.  
Using [K / L], select a desired  
option to repeat. Press [OK].  
The selected repeat play will start.  
PQRS  
TUV  
8
WXYZ  
9
7
1
DISPLAY  
SPACE  
CLEAR  
0
1
TITLE  
DISC MENU RETURN  
1
1
0:00:00  
DVD-Video  
Title:  
The current title will be played  
repeatedly. (DVD only)  
2
3
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
Chapter:  
The current chapter will be played  
2
RAPID PLAY PREV  
REC  
Using [{ / B], select  
. Press  
CM SKIP  
repeatedly. (DVD only)  
[OK].  
Repeat menu will appear.  
All:  
When inserting <DVD-Video> disc.  
Note  
The current disc will be played  
repeatedly. (CD, MP3, Video CD)  
1
1
0:00:00  
DVD-Video  
• The A-B Repeat playback can  
only be set with in the current  
title (for DVDs), or current  
track (for Audio CDs).  
OFF  
Title  
Chapter  
A - B  
A-B:  
The A-B point will be played  
• To cancel the repeat  
repeatedly.  
When inserting  
<Audio CD, Video CD> disc.  
playback, select “OFF” at the  
step 2. The repeat setting will  
also be canceled when you  
stop playback.  
• You cannot select “Group”  
during the random playback  
of MP3 files.  
When pressing [OK] while A-B  
is highlighted, A-B repeat is set.  
Press [OK] again to decide the  
starting point (A).  
Press [OK] after setting point A to  
select the ending point (B).  
1
0:00:00  
Audio CD  
OFF  
Track  
All  
A-B  
• Repeat playback is not  
available when you play the  
Video CD with PBC function.  
Track:  
When inserting <MP3 files> disc.  
The current track will be played  
repeatedly. (CD, MP3, Video CD)  
1
0:00:00  
MP3  
OFF  
Track  
All  
Group  
Group:  
The current group will be played  
repeatedly. (MP3 only)  
PQRS  
7
TUV  
8
WXYZ  
9
REPEAT  
SETUP  
OK  
DISPLAY  
SPACE  
CLEAR  
0
1
TITLE  
DISC MENU RETURN  
Random playback  
2
3
CD  
Video CD  
MP3  
With this function, you can play a  
disc randomly instead of playing in  
the original order.  
3
Note  
Using [K / L], select “Random  
Play”. Press [OK].  
Random playback will start.  
•
To cancel random playback,  
press [STOP C] twice during  
random playback. “Play mode  
OFF” appears on the TV  
screen.  
1
Press [SETUP].  
•
For Video CDs with PBC  
function, the PBC setting will  
be switched to off automatically  
when you start random playback.  
2
Using [K / L], select “CD  
Playback Mode”. Press [OK].  
CD Playback Mode menu will  
appear.  
EN  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Repeat/Random/Program playback (cont’d)  
Program playback  
PQRS  
7
TUV  
8
WXYZ  
9
REPEAT  
SETUP  
OK  
DISPLAY  
SPACE  
CLEAR  
CD  
Video CD  
0
1
5
TITLE  
DISC MENU RETURN  
You can program the disc to play  
in your desired order.  
4
Using [K / L], select a desired  
track. Press [OK] or [B].  
A cursor will move to next.  
2
3
4
1
REC MODE  
REV  
PLAY  
FWD  
Press [SETUP].  
Program Play  
RAPID PLAY PREV  
PAUSE  
NEXT  
2
09 --  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
Using [K / L], select “CD  
Playback Mode”. Press [OK].  
CD Playback Mode menu will  
appear.  
--  
--  
--  
--  
--  
--  
--  
--  
Note  
• To erase tracks you selected,  
press [CLEAR].  
• You can make program  
Total 0:06:11  
settings up to 50.  
• To cancel program playback,  
press [STOP C] twice during  
program playback. “Play  
mode OFF” appears on the  
TV screen.  
• You may also select a desired  
track using the Number  
buttons at step 4.  
• For Video CDs with PBC  
function, the PBC setting  
will be switched to off  
automatically when you start  
program playback.  
3
Using [K / L], select “Program  
Play”. Press [OK].  
Program play list will appear.  
5
Press [PLAY B] to start  
program playback.  
Program Play  
Program playback will start.  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
Total 0:00:00  
Selecting the format of audio and video  
You can select the format of audio and video as you prefer depending on  
the contents of the disc you are playing.  
Switching subtitles  
PQRS  
7
TUV  
8
WXYZ  
9
REPEAT  
SETUP  
OK  
DISPLAY  
SPACE  
CLEAR  
DVD-V  
0
1
TITLE  
DISC MENU RETURN  
Many DVD-Video discs have  
subtitles in one or more languages  
– the case usually tells you which  
subtitle languages are available.  
You can switch subtitle languages  
anytime during playback.  
2
Using [{ / B], select  
Press [OK].  
.
2
3
Subtitle menu will appear.  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
1
1
0:00:00  
DVD-Video  
RAPID PLAY PREV  
REC  
OFF  
1.English  
2.French  
CM SKIP  
1
During playback, press  
[DISPLAY].  
Note  
• Some discs will only allow you  
to change the subtitle from  
the disc menu. Press  
[TITLE] or [DISC MENU] to  
display the disc menu.  
• If a 4-digit language code  
appears in the subtitle  
menu at step 2, refer to the  
Language code on page 74.  
Display menu will appear.  
3
1
1
0:00:00  
DVD-Video  
Using [K / L], select a desired  
subtitle language. Press [OK].  
Subtitle will be displayed in the  
selected language.  
When selecting “OFF”, subtitle will  
disappear.  
EN  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Selecting the format of audio and video (cont’d)  
Switching audio soundtrack  
Video CD  
CD  
DVD-V  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
When playing a DVD-Video  
disc recorded with two or more  
soundtracks (these are often in  
different languages), you can  
switch them during playback.  
When playing Video CDs or Audio  
CDs, you can switch between  
stereo, just the left channel or just  
the right channel.  
When inserting <Audio CD> disc.  
.@/:  
1
ABC  
2
DEF  
3
1
0:00:00  
Audio CD  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
1.L/R  
2.L  
3.R  
PQRS  
TUV  
8
WXYZ  
9
7
DISPLAY  
SPACE  
CLEAR  
0
1
TITLE  
DISC MENU RETURN  
3
Using [K / L], select a desired  
audio soundtrack or audio chan-  
nel. Press [OK].  
2
3
4
1
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
During playback, press  
[DISPLAY].  
When inserting <DVD-Video> disc.  
Audio soundtrack will switch.  
RAPID PLAY PREV  
REC  
Display menu will appear.  
CM SKIP  
When inserting  
2
<Video CDs/Audio CDs> disc.  
Audio channel will switch.  
Note  
Using [{ / B], select  
.
• Some discs will only allow  
you to change the soundtrack  
from the disc menu. Press  
[TITLE] or [DISC MENU] to  
display the disc menu.  
Press [OK].  
Audio menu will appear.  
When inserting <DVD-Video> disc.  
4
Using [K / L], select a desired  
audio channel. Press [OK].  
Audio channel will switch.  
1
1
0:00:00  
DVD-Video  
• This unit CANNOT record  
in both stereo and SAP  
(Secondary Audio Program)  
at the same time.  
1.Dolby Digital 5.1ch English  
2.Dolby Digital 2ch French  
Switching virtual surround system  
DL  
+VR  
+VR  
DVD-R  
DVD-V  
Video  
DVD+RW  
Video  
DVD+R  
DVD+R  
DVD-RW  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
DVD-RW  
Video CD  
DVD-R  
CD  
CD  
MP3  
.@/:  
1
ABC  
2
DEF  
3
You can enjoy stereophonic virtual  
space through your exciting 2  
channel stereo system.  
When inserting <DVD+RW> disc.  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
1
1
0:00:00  
DVD+RW  
PQRS  
TUV  
8
WXYZ  
9
7
OFF  
Type 1  
Type 2  
DISPLAY  
SPACE  
CLEAR  
0
1
TITLE  
DISC MENU RETURN  
1
During playback, press [DISPLAY].  
Display menu will appear.  
When inserting  
<Audio CD/MP3 files> disc.  
2
3
1
1
0:00:00  
DVD-Video  
1
1
0:00:00  
Audio CD  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
OFF  
RAPID PLAY PREV  
REC  
Type 1  
Type 2  
CM SKIP  
2
Using [{ / B], select  
.
3
Press [OK].  
Virtual Surround menu will appear.  
Using [K / L], to select “OFF”,  
“Type 1” or “Type 2”, then  
press [OK].  
• OFF: no effect  
• Type 1: natural effect  
• Type 2: emphasized effect  
When inserting <DVD-Video> disc.  
Note  
1
1
0:00:00  
DVD-Video  
• Select Virtual Surround  
to “OFF” in case sound is  
distorted.  
OFF  
Type 1  
Type 2  
• The setting will be kept “OFF”  
when the unit is turned off.  
EN  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Selecting the format of audio and video (cont’d)  
Switching camera angles  
DVD-V  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
Some DVD-Video discs feature  
scenes shot from two or more  
angles, check the case for details:  
it should be marked with Angle  
icon if it contains multi-angle  
scenes.  
2
.@/:  
1
ABC  
2
DEF  
3
Using [{ / B], select  
.
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
Press [OK].  
4
5
6
Angle will switch each time you  
press [OK].  
PQRS  
TUV  
8
WXYZ  
9
7
DISPLAY  
SPACE  
CLEAR  
0
1
TITLE  
DISC MENU RETURN  
1
During playback, press  
[DISPLAY].  
2
Display menu will appear.  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
1
1
0:00:00  
DVD-Video  
RAPID PLAY PREV  
REC  
CM SKIP  
Note  
Angle icon does not appear on  
the screen if you have selected  
Angle as “OFF” in the Display  
setting.  
Angle icon appears when a  
switching camera angle is available.  
Refer to pages 65-66.  
Reducing block noise  
+VR  
DVD-RW  
DVD-RW  
+VR  
DVD-R  
DL  
DVD+R  
DVD-V  
Video  
DVD+RW  
Video  
DVD+R  
DVD-RW  
Video CD  
DVD-R  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
1
3
.@/:  
1
ABC  
2
DEF  
3
During playback, press  
[DISPLAY].  
Using [K / L], select a desired  
option. Press [OK].  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
Display menu will appear.  
Your setting will be activated.  
PQRS  
TUV  
8
WXYZ  
9
7
DISPLAY  
SPACE  
CLEAR  
This function reduces noise in the  
playback picture. When playing  
back discs recorded in long time  
mode such as EP or SLP mode,  
select “Type 1” or “Type 2”.  
(“Type 2” is more effective.)  
When playing back discs with a  
few noises such as DVD-Video  
discs, select “OFF”.  
0
1
1
0:00:00  
DVD-Video  
1
TITLE  
DISC MENU RETURN  
2
3
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
RAPID PLAY PREV  
REC  
CM SKIP  
2
Using [{ / B], select  
.
Press [OK].  
Noise Reduction menu will appear.  
1
1
0:00:00  
DVD-Video  
OFF  
Type 1  
Type 2  
EN  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Information on disc editing  
Guide to a title list  
Editing discs  
Title list allows you to check the titles recorded on  
the disc easily. You can choose a title to play from  
this list and easily edit the titles as you prefer.  
You can edit discs for the following items. Be sure  
that once you edit titles, they will not remain as  
original.  
• Deleting titles (Refer to page 52)  
• Putting names on titles (Refer to page 53)  
• Setting chapter marks (Refer to page 54)  
• Clearing chapter marks (Refer to pages 54-55)  
• Hiding chapters (Refer to page 56)  
• Setting pictures for thumbnails (Refer to page 57)  
• Dividing a title (DVD+RW/DVD-RW only) (Refer to  
page 58)  
Press [TITLE].  
1
SP (2Hr)  
NOV/21/06 11:00AM CH12 SP  
NOV/21/06 0:20:44  
2
Play  
Edit  
Overwrite  
NOV/22/06 11:35AM CH13 EP  
NOV/22/06 0:10:33  
3
Note  
NOV/24/06 10:05AM CH10 EP  
NOV/24/06 0:20:11  
• When selecting “Edit” on Pop-up menu of the title  
list and edit the title, the title list is displayed after  
writing the edited contents onto the disc. Press  
[STOP C] to exit the title list.  
Edit  
Title Delete  
6
Editing discs (Setup menu)  
Edit Title Name  
Chapter Mark  
Current Chapter  
Index Picture  
Title Dividing  
• Putting name on disc (Refer to page 59)  
• Setting or releasing disc protect (Refer to pages  
60-61)  
NOV/22/05 11:00AM CH12 EP  
0:00:59  
• Erasing disc (Refer to page 62)  
• Making edits compatible (Refer to page 62)  
Note  
• The portion bar in the right side of the title list  
may not indicate the precise position in the disc.  
• The portion bar may not indicate the position for  
the titles of which recording time is short.  
• Once a disc is finalized, editing the disc or  
recording to the disc will not be available.  
1.Titles recorded on the disc can be selected to edit  
by pressing [OK] with the cursor on the title.  
Using [K / L], select “Edit”. Press [OK].  
2.The arrow icon, which means the title list includes  
a next or a previous page. Press [K / L] by  
following direction of the icon. You can also use  
[{ / B] to go to the next/previous page.  
3.The portion bar, which indicates the position of the  
disc.  
4.The menus in here for editing as you prefer. The  
available menus depend on the disc type and  
the format type. An item which is not available is  
grayed.  
5.The details of the title, which can be changed to  
the title name you will edit.  
6.Time status bar of the title.  
Time status will be held even after exiting the edit  
mode, and you can resume playback from that  
point.  
7.The selected title thumbnail from the title list.  
8.Playback status of the current title.  
EN  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing discs  
Deleting titles  
+VR  
DVD-RW  
+VR  
DVD-R  
DVD+RW  
DVD+R  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
You can delete titles which you do  
not need anymore.  
.@/:  
1
ABC  
2
DEF  
3
4
Be advised that the titles once deleted  
cannot be brought back to the disc.  
When the last title, which is recorded  
in the disc, in the title list is deleted,  
the disc space to record on will be  
increased. For DVD+R and DVD-R  
disc, the disc space to record on will  
not be changed.  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
Using [K / L], select “Title  
Delete”. Press [OK].  
4
5
6
PQRS  
TUV  
8
WXYZ  
9
7
Confirmation window will appear.  
DISPLAY  
SPACE  
CLEAR  
0
Title Delete  
TITLE  
DISC MENU RETURN  
Yes  
1
1
2
3
4
5
No  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
1
NOV/22/05 11:00AM CH12 EP  
0:00:59  
RAPID PLAY PREV  
REC  
Press [TITLE].  
Title list will appear.  
CM SKIP  
When inserting  
<DVD+RW/DVD-RW> disc.  
5
Using [K / L], select “Yes”.  
Press [OK].  
SP (2Hr)  
1
After that, “Are you sure?” will  
appear, select “Yes” and then  
press [OK].  
Title will be deleted.  
Data will be written onto the disc  
momentarily.  
NOV/21/06 11:00AM CH12 SP  
NOV/21/06 0:20:44  
2
NOV/22/06 11:35AM CH13 EP  
NOV/22/06 0:10:33  
3
EMPTY TITLE  
1:37:52 SP(2Hr)  
Note  
• Deleted part of the titles in the  
portion bar changes in color.  
Writing to Disc  
90%  
2
Using [K / L], select a desired  
title. Press [OK].  
Title list will appear.  
Pop-up window will appear.  
When inserting  
<DVD+RW/DVD-RW> disc.  
SP (2Hr)  
1
Play  
Edit  
Overwrite  
SP (2Hr)  
1
NOV/21/06 11:00AM CH12 SP  
NOV/21/06 0:20:44  
EMPTY TITLE  
0:20:44 SP(2Hr)  
2
2
NOV/22/06 11:35AM CH13 EP  
NOV/22/06 0:10:33  
NOV/22/06 11:35AM CH13 EP  
NOV/22/06 0:10:33  
3
3
EMPTY TITLE  
1:37:52 SP(2Hr)  
EMPTY TITLE  
1:37:52 SP(2Hr)  
When inserting  
<DVD+R/DVD-R> disc.  
3
Using [K / L], select “Edit”.  
Press [OK].  
SP (2Hr)  
1
Edit menu will appear.  
NOV/22/06 11:35AM CH13 EP  
NOV/22/06 0:10:33  
Edit  
2
EMPTY TITLE  
1:37:52 SP(2Hr)  
Title Delete  
1
Edit Title Name  
Chapter Mark  
Current Chapter  
Index Picture  
Title Dividing  
NOV/22/05 11:00AM CH12 EP  
0:00:59  
This operation may take a  
while to be completed.  
EN  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing discs (cont’d)  
Putting names on titles  
+VR  
DVD+RW  
+VR  
DVD+R  
DVD-RW  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
4
ZOOM  
DVD-R  
Using [K / L], select “Yes”.  
Press [OK].  
.@/:  
1
ABC  
2
DEF  
3
You can put title names on the  
titles and change the names from  
this menu.  
The names you put on the titles  
will be displayed on a title list.  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
The name you entered will be  
activated for the title.  
4
5
6
3
5
PQRS  
TUV  
8
WXYZ  
9
7
Edit Title Name  
DISPLAY  
SPACE  
CLEAR  
0
Yes  
6
TITLE  
DISC MENU RETURN  
No  
1
Follow steps 1 to 3 in “Deleting titles”  
on page 52 to display the Edit menu.  
2
3
4
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
MY FAVORITE  
0:00:59  
RAPID PLAY PREV  
REC  
2
CM SKIP  
Using [K / L], select “Edit Title  
Name”. Press [OK].  
A window for entering a title name  
will appear.  
5
After this operation is completed,  
press [RETURN ] to exit.  
Data will be written onto the disc  
momentarily.  
Edit Title Name  
This operation may take a  
while to be completed.  
A
a
B
b
2
!
C
c
3
?
6
1
@
[
]
Guide to edit title name  
[
[
]
Select a desired character set using [K L],  
A B C  
Step1 :  
/
NOV/22/05 11:00AM CH12 EP  
then press [OK].  
a b c  
1 2 3  
@ ! ?  
0:00:59  
]
Step2 : Follow the list below, press the Number buttons repeatedly until the  
3
e.g. character set : A B C  
desired letter appears.  
To enter a title name, follow  
the steps of “Guide to edit title  
name” on this page.  
2
Select  
Press  
press  
ABC  
abc  
123  
@ ! ?  
...  
A B C A  
0
character set  
<space> <space>  
0
<space>  
Edit Title Name  
! ” # $ % & ’ ( )  
Note:  
Undefined letters in a  
title name are shown  
1
A
a
B
b
2
!
C
c
3
?
(*1)  
(*1)  
1
+ , - . / : ; < = >  
*
6
? @ [ ] ^ _ { | }  
1
@
by “ ”. If you delete  
*
them, adjoining letters  
letters may change to  
2
3
4
5
6
7
8
9
(*2)  
(*2)  
(*2)  
(*2)  
(*2)  
(*2)  
(*2)  
(*2)  
ABC  
DEF  
abc  
def  
2
3
4
5
6
7
8
9
M
“ ” or other.  
*
0:00:59  
GHI  
ghi  
JKL  
jkl  
MNO  
PQRS  
TUV  
mno  
pqrs  
tuv  
area for entering title names  
When you finish entering a title  
name, press [OK].  
WXYZ  
wxyz  
Confirmation window will appear.  
1
*1 Press  
*2 Press  
, character set will be changed to the “ @ ” mode automatically.  
!?  
2
9
to  
, character set will be changed to the previous input mode  
automatically.  
• To delete letters, press [CLEAR] repeatedly. Holding [CLEAR] to delete  
all letters.  
• Press [s /  
B]  
to move the cursor to the left and right.  
• You can enter up to 30 letters.  
EN  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing discs (cont’d)  
Setting chapter marks  
+VR  
GHI  
4
JKL  
5
MNO  
6
CH  
REPEAT  
SETUP  
OK  
+VR  
DVD-R  
PQRS  
TUV  
WXYZ  
DVD+RW  
DVD+R  
DVD-RW  
7
8
9
You can put chapter marks in each  
title. Once a chapter is marked,  
you can use it for the chapter  
search feature.  
• It is convenient to use  
DISPLAY  
SPACE  
0
CLEAR  
[PREV H],[NEXT G],  
[REV E] and [FWD D] for  
finding the point at which a new  
chapter mark is to be added.  
TITLE  
DISC MENU RETURN  
2
4
5
6
1
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
Follow steps 1 to 3 in “Deleting titles”  
on page 52 to display the Edit menu.  
4
RAPID PLAY PREV  
REC  
Using [K / L], select “Add”.  
Press [OK].  
3
CM SKIP  
Confirmation window will appear.  
2
Using [K / L], select “Chapter  
Mark”. Press [OK].  
Option window will appear.  
Chapter Mark  
-
Add  
Note  
Yes  
No  
3
• When the number of chapter  
marks in a title is 49 and the  
number of chapter marks in  
a disc is 254, chapter marks  
cannot be added.  
Chapter  
2/  
2
Chapter Mark  
F
Add  
3
Delete  
NOV/22/05 11:00AM CH12 EP  
Delete All  
0:00:59  
Chapter  
2/  
2
• Besides the above-mentioned,  
it is not likely to be able to  
add according to recorded  
time and number of chapters.  
• Remaining time of the disc  
may decrease when adding  
chapter marks or increase  
when clearing chapter marks  
depending on the recording  
time or edited contents.  
5
NOV/22/05 11:00AM CH12 EP  
Using [K / L], select “Yes”.  
Press [OK].  
0:00:59  
A new chapter mark will be added.  
3
6
Press [PLAY B] and then  
[PAUSE F] to decide the point  
at which you will create a new  
chapter mark.  
Press [RETURN ] twice to exit.  
Data will be written onto the disc  
momentarily.  
This operation may take a  
while to be completed.  
Clearing chapter marks  
+VR  
GHI  
4
JKL  
5
MNO  
6
CH  
REPEAT  
SETUP  
OK  
+VR  
DVD-R  
PQRS  
TUV  
WXYZ  
DVD+RW  
DVD+R  
DVD-RW  
7
8
9
DISPLAY  
SPACE  
0
CLEAR  
1
4
TITLE  
DISC MENU RETURN  
Follow steps 1 to 3 in “Deleting titles”  
on page 52 to display the Edit menu.  
Using [K / L], select “Delete”.  
Press [OK].  
2
4
5
Confirmation window will appear.  
2
Chapter Mark  
-
Delete  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
Using [K / L], select “Chapter  
Mark”. Press [OK].  
Option window will appear.  
Yes  
No  
3
RAPID PLAY PREV  
REC  
CM SKIP  
3
Chapter  
2/  
2
F
3
NOV/22/05 11:00AM CH12 EP  
Using [PREV H] / [NEXT G],  
select a chapter mark to be  
deleted.  
Note  
0:00:59  
• Remaining time of the disc  
may decrease when adding  
chapter marks or increase  
5
Using [K / L], select “Yes”.  
Press [OK].  
when clearing chapter marks  
depending on the recording  
time or edited contents.  
The selected chapter mark will be  
deleted.  
Instructions continue on the next page.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
54  
Editing  
Editing discs (cont’d)  
Clearing chapter marks (cont’d)  
GHI  
4
JKL  
5
MNO  
6
CH  
REPEAT  
SETUP  
OK  
PQRS  
TUV  
WXYZ  
6
7
8
9
Press [RETURN ] twice to exit.  
Data will be written onto the disc  
momentarily.  
DISPLAY  
SPACE  
0
CLEAR  
TITLE  
DISC MENU RETURN  
6
This operation may take a  
while to be completed.  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
RAPID PLAY PREV  
REC  
CM SKIP  
To delete all chapter marks:  
5
1
STANDBY-ON  
ZOOM  
OPEN/CLOSE  
TIMER  
PROG.  
Follow steps 1 to 3 in “Deleting titles”  
on page 52 to display the Edit menu.  
Using [K / L], select “Yes”.  
Press [OK].  
.@/:  
1
ABC  
2
DEF  
3
All chapter marks will be deleted.  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
2
4
5
6
Using [K / L], select “Chapter  
Mark”. Press [OK].  
PQRS  
TUV  
8
WXYZ  
9
6
7
Press [RETURN ] twice to exit.  
Data will be written onto the disc  
momentarily.  
DISPLAY  
SPACE  
CLEAR  
0
Option window will appear as  
illustrated step 2 on page 54.  
TITLE  
DISC MENU RETURN  
2
3
4
5
6
This operation may take a  
while to be completed.  
3
Using [K / L], select “Delete  
All”. Press [OK].  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
Confirmation window will appear.  
RAPID PLAY PREV  
REC  
CM SKIP  
Chapter Mark  
-
Delete All  
Yes  
No  
3
Chapter  
2/  
2
F
NOV/22/05 11:00AM CH12 EP  
0:00:59  
4
Using [K / L], select “Yes”.  
Press [OK].  
Final confirmation window will  
appear.  
Chapter Mark  
-
Delete All  
Are you sure?  
Yes  
3
No  
Note  
Chapter  
2/  
2
• Remaining time of the disc  
may decrease when adding  
chapter marks or increase  
NOV/22/05 11:00AM CH12 EP  
0:00:59  
when clearing chapter marks  
depending on the recording  
time or edited contents.  
EN  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing discs (cont’d)  
Hiding chapters  
+VR  
DVD-RW  
+VR  
DVD-R  
DVD+RW  
DVD+R  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
You can hide chapters from the  
title list.  
Hidden chapters are skipped  
during playback.  
5
.@/:  
1
ABC  
2
DEF  
3
After this operation is com-  
pleted, press [RETURN ] twice  
to exit.  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
PQRS  
TUV  
8
WXYZ  
9
7
Data will be written onto the disc  
momentarily.  
DISPLAY  
SPACE  
CLEAR  
1
0
TITLE  
DISC MENU RETURN  
Follow steps 1 to 3 in “Deleting  
titles” on page 52 to display the  
Edit menu.  
2
4
This operation may take a  
while to be completed.  
5
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
If you want to return “Visible”,  
select the chapter to be shown.  
Then using [K / L],, select  
“Visible” at the step 2 on this  
page.  
2
Using [K / L]], select “Current  
Chapter”. Press [OK].  
Option window will appear.  
RAPID PLAY PREV  
REC  
3
CM SKIP  
Current Chapter  
Visible  
1
Data will be written onto the disc  
momentarily.  
Hidden  
Chapter  
2/  
2
Visible  
After that title list is displayed.  
NOV/22/05 11:00AM CH12 EP  
0:00:59  
3
Using [PREV H] / [NEXT G],  
[PLAY B] and [PAUSE F],  
decide the chapter to be hidden.  
4
Using [K / L],, select “Hidden”.  
Press [OK].  
“Hidden” is displayed in the middle  
of the preview screen on Current  
chapter window.  
“Hidden” is also displayed on the  
lower right corner of the preview  
screen on Edit menu option  
window other than Current chapter  
window.  
Note  
• When you make all chapters  
in the title to “Hidden”,  
“Hidden” is displayed in a  
thumbnail of the title list.  
SP (2Hr)  
1
Hidden  
NOV/21/06 12:20AM CH12 SP  
NOV/21/06 0:20:44  
2
NOV/22/06 11:35AM CH13 EP  
NOV/22/06 0:10:33  
3
EMPTY TITLE  
1:37:52 SP(2Hr)  
EN  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing discs (cont’d)  
Setting pictures for thumbnails  
+VR  
DVD-RW  
+VR  
DVD-R  
DVD+RW  
DVD+R  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
You can set a picture to each title  
for a thumbnail. It helps you to  
remember the contents of the title  
you are playing. The beginning  
picture has been selected as the  
default.  
4
.@/:  
1
ABC  
2
DEF  
3
Using [K / L], select “Yes”.  
Press [OK].  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
PQRS  
TUV  
8
WXYZ  
9
A picture for thumbnail will be set.  
7
DISPLAY  
SPACE  
CLEAR  
0
5
TITLE  
DISC MENU RETURN  
Press [RETURN ] to exit.  
Data will be written onto the disc  
momentarily.  
1
5
3
4
Follow steps 1 to 3 in “Deleting titles”  
on page 52 to display the Edit menu.  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
This operation may take a  
while to be completed.  
2
RAPID PLAY PREV  
REC  
2
Use [PREV H], [NEXT G],  
[REV E], [FWD D],  
[PAUSE F] and [PLAY B] to  
decide the picture you want to  
select as a thumbnail.  
CM SKIP  
3
Using [K / L], select “Index  
Picture”. Press [OK].  
Confirmation window will appear.  
Index Picture  
1
Yes  
No  
F
NOV/22/05 11:00AM CH12 EP  
0:00:59  
Note  
• If the selected picture for  
a thumbnail is overwritten  
a default picture will be  
selected.  
EN  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing discs (cont’d)  
Dividing a title  
+VR  
DVD+RW DVD-RW  
4
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
Using [K / L], select “Yes”.  
Press [OK].  
You can divide one title into two  
new titles.  
.@/:  
1
ABC  
2
DEF  
3
The title will be divided into two  
new titles.  
Both title names are identical, and  
index pictures are reset to the first  
scene at this point.  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
1
PQRS  
TUV  
8
WXYZ  
9
7
Follow steps 1 to 3 in “Deleting  
titles”on page 52 to display the  
Edit menu.  
DISPLAY  
SPACE  
CLEAR  
0
TITLE  
DISC MENU RETURN  
3
4
Data will be written onto the disc  
momentarily.  
2
Use [PREV H], [NEXT G],  
[REV E], [FWD D],  
[PAUSE F] and [PLAY B] to  
decide the point at which you  
will divide the title.  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
This operation may take a  
while to be completed.  
RAPID PLAY PREV  
REC  
2
CM SKIP  
3
Using [K / L], select “Title  
Dividing”. Press [OK].  
Confirmation window will appear.  
Title Dividing  
6
Yes  
No  
F
NOV/22/05 11:00AM CH12 EP  
0:00:59  
Note  
• You cannot divide a title of  
the disc on which the number  
of recording title comes up to  
the maximum (49), and the  
number of recording chapter  
comes up to the maximum  
(254).  
EN  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing discs (Setup menu)  
Putting name on disc  
+VR  
DVD-RW  
+VR  
DVD-R  
DVD+RW  
DVD+R  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
You can put title names on the  
titles and change the names from  
this menu.  
3
.@/:  
1
ABC  
2
DEF  
3
Using [K / L], select “Edit Disc  
Name”. Press [OK].  
A window for entering a title name  
will appear.  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
PQRS  
TUV  
8
WXYZ  
9
Press [STOP C] if you are  
playing a disc.  
7
DISPLAY  
SPACE  
CLEAR  
0
1
TITLE  
DISC MENU RETURN  
Edit Disc Name  
A
a
B
b
2
!
C
c
3
?
2
3
4
5
1
No Disc Name  
1
Disc  
DVD+RW  
3
Press [SETUP].  
@
Total Titles  
Disc Space Used  
Disc Protect  
0:30:48  
OFF  
Make Edits Compatible  
Needed  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
2
RAPID PLAY PREV  
REC  
Using [K / L], select “Disc Edit”.  
Press [OK].  
0:00:00  
CM SKIP  
Disc Edit menu will appear.  
4
When inserting <DVD+RW> disc.  
To enter a disc name, follow  
the steps of “Guide to edit title  
name” on page 53.  
Disc Edit  
Edit Disc Name  
Disc Protect OFF  
Erase Disc  
ON  
When you finish entering a title  
Make Edits Compatible  
name, press [OK].  
Confirmation window will appear.  
Edit Disc Name  
Yes  
No  
No Disc Name  
When inserting  
<DVD+R/DVD-R> disc.  
Disc  
DVD+RW  
3
Total Titles  
Disc Space Used  
Disc Protect  
Make Edits Compatible  
0:30:48  
OFF  
Needed  
Disc Edit  
Edit Disc Name  
MY FAVORITE DISC  
Disc Protect OFF  
Finalize  
ON  
0:00:00  
5
Using [K / L], select “Yes”.  
Press [OK].  
The name you entered will be  
activated for the title.  
Data will be written onto the disc  
momentarily.  
When inserting <DVD-RW> disc.  
Disc Edit  
Edit Disc Name  
Disc Protect OFF  
ON  
Erase Disc  
Finalize  
This operation may take a  
while to be completed.  
Note  
• You cannot select “Disc Edit”  
when finalized DVD disc is  
inserted (DVD+R/DVD-R).  
EN  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing discs (Setup menu) (cont’d)  
Setting or releasing disc protect  
+VR  
DVD-RW  
+VR  
DVD-R  
DVD+RW  
DVD+R  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
To prevent accidental editing, or  
erasing the titles, you can protect  
them.  
2
.@/:  
1
ABC  
2
DEF  
3
Using [K / L]], select “Disc  
Protect OFF ON”. Press [OK].  
Confirmation window will appear.  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
PQRS  
TUV  
8
WXYZ  
9
7
1
DISPLAY  
SPACE  
CLEAR  
Disc Protect OFF  
ON  
Follow steps 1 to 2 in “Putting name  
on disc” on page 59 to display the  
Disc Edit menu.  
0
Yes  
No  
TITLE  
DISC MENU RETURN  
2
3
When inserting <DVD+RW> disc.  
Disc Edit  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
Edit Disc Name  
Disc Protect OFF  
Erase Disc  
ON  
RAPID PLAY PREV  
REC  
Make Edits Compatible  
CM SKIP  
3
Using [K / L], select “Yes”.  
Press [OK].  
Data will be written onto the disc  
momentarily.  
When inserting  
This operation may take a  
while to be completed.  
<DVD+R/DVD-R> disc.  
Disc Edit  
Edit Disc Name  
Disc Protect OFF  
Finalize  
ON  
When inserting <DVD-RW> disc.  
Disc Edit  
Edit Disc Name  
Disc Protect OFF  
ON  
Erase Disc  
Finalize  
Instructions continue on the next page.  
EN  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing discs (Setup menu) (cont’d)  
Setting or releasing disc protect (cont’d)  
Releasing disc from protect  
OPEN/CLOSE  
2
STANDBY-ON  
TIMER  
PROG.  
ZOOM  
Using [K / L]], select “Disc  
Protect ON OFF”. Press [OK].  
Confirmation window will appear.  
1
.@/:  
1
ABC  
2
DEF  
3
Follow steps 1 to 2 in “Putting name  
on disc” on page 59 to display the  
Disc Edit menu.  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
Disc Protect ON  
OFF  
PQRS  
TUV  
8
WXYZ  
9
7
Yes  
No  
When inserting <DVD+RW> disc.  
DISPLAY  
SPACE  
CLEAR  
0
Disc Edit  
TITLE  
DISC MENU RETURN  
2
3
Edit Disc Name  
Disc Protect ON  
Erase Disc  
OFF  
Make Edits Compatible  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
RAPID PLAY PREV  
REC  
3
Using [K / L], select “Yes”.  
Press [OK].  
CM SKIP  
When inserting  
<DVD+R/DVD-R> disc.  
Data will be written onto the disc  
momentarily.  
Disc Edit  
This operation may take a  
while to be completed.  
Edit Disc Name  
Disc Protect ON  
Finalize  
OFF  
When inserting <DVD-RW> disc.  
Disc Edit  
Edit Disc Name  
Disc Protect ON  
OFF  
Erase Disc  
Finalize  
EN  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing discs (Setup menu) (cont’d)  
Erasing disc  
Video  
DVD-RW  
+VR  
DVD+RW DVD-RW  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
You can erase all titles on a disc.  
If you want to record on DVD-RW  
formatted with other than DVD+VR  
mode, erase all contents on the  
disc it will be recorded to DVD+VR  
automatically.  
2
.@/:  
1
ABC  
2
DEF  
3
Using [K / L]], select “Erase  
Disc”. Press [OK].  
Confirmation window will appear.  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
PQRS  
TUV  
8
WXYZ  
9
7
DISPLAY  
SPACE  
CLEAR  
Erase Disc  
0
TITLE  
DISC MENU RETURN  
Yes  
No  
Press [STOP C] if you are  
2
3
playing a disc.  
When you press “Yes”, all the  
contents in the disc will be erased.  
Are you sure to erase the disc?  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
1
Follow steps 1 to 2 in “Putting name  
on disc” on page 59 to display the  
Disc Edit menu.  
RAPID PLAY PREV  
REC  
CM SKIP  
3
Disc Edit  
Using [K / L], select “Yes”.  
Press [OK].  
Data will be written onto the disc  
Edit Disc Name  
Note  
Disc Protect OFF  
Erase Disc  
ON  
• When you press “Yes”, all  
contents of the disc will be  
erased.  
• When a disc is erased all of  
the contents will be lost. (Its  
format will be changed to  
DVD+VR mode.)  
Make Edits Compatible  
momentarily.  
This operation may take a  
while to be completed.  
• If you want to cancel erasing  
the disc at step 2, select “No”.  
Making edits compatible  
DVD+RW  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
You will need to select “Make  
Edits Compatible” to play in other  
DVD players.  
2
.@/:  
1
ABC  
2
DEF  
3
Using [K / L]], select “Make  
Edits Compatible”. Press [OK].  
Confirmation window will appear.  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
Press [STOP C] if you are  
playing a disc.  
PQRS  
TUV  
8
WXYZ  
9
7
DISPLAY  
SPACE  
CLEAR  
Make Edits Compatible  
0
Yes  
No  
TITLE  
DISC MENU RETURN  
2
3
1
Follow steps 1 to 2 in “Putting name  
on disc” on page 59 to display the  
Disc Edit menu.  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
Disc Edit  
RAPID PLAY PREV  
REC  
Edit Disc Name  
Disc Protect OFF  
Erase Disc  
ON  
CM SKIP  
3
Make Edits Compatible  
Using [K / L], select “Yes”.  
Press [OK].  
Note  
Data will be written onto the disc  
momentarily.  
• If “Make Edits Compatible”  
is not selectable in “Disc  
Edit” menu, you do not need  
to perform “Make Edits  
Compatible” to play in other  
DVD players.  
This operation may take a  
while to be completed.  
EN  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the Setup menu  
Tour of the Setup menu  
The following table is the contents which you can set and the default settings.  
Refer to the following table for useful operation.  
Setup  
Items (highlight is the default)  
Contents  
1.Language setting Disc Menu Language  
Pages 64-65  
Set the language for disc menu.  
English  
French  
Spanish  
Audio Language  
Set the language for audio.  
Set the language for subtitle.  
Original  
English  
French  
Subtitle Language  
OFF  
English  
French  
2.Display setting  
Pages 65-66  
OSD Language  
Set the language for OSD  
(On Screen Display).  
English  
Français  
Español  
Angle Icon  
Display or undisplay multi-angle  
icon if DVD in playback mode  
contains multi-angle scenes.  
ON  
OFF  
Screen Saver  
OFF  
5 minutes  
10 minutes  
Set the time to work the screen  
saver on the screen.  
3.Audio setting  
Pages 66-67  
Digital Out  
PCM  
Set whether the sound recorded  
in 96kHz will be down sampled  
in 48kHz.  
48kHz  
96kHz  
Dolby Digital  
Set the type of sound signal  
which outputs from the digital  
audio output jack.  
PCM  
Stream  
Dynamic Range  
Control  
Compressing the range of sound  
volume.  
ON  
OFF  
4.Video setting  
Page 68  
Progressive Scan  
ON  
OFF  
Set to the progressive scan mode  
(set to “ON”) or to the interlace  
scan mode (set to “OFF”).  
Still Mode  
Set the type of still image in  
pausing playback.  
Auto  
Field  
Frame  
5.Parental setting  
Pages 69-70  
Parental Lock  
Set the parental level of your  
DVD discs.  
All  
level 8 to 1  
(Change password)  
PBC (Video CD only)  
Enter the current  
Set and change the password.  
four-digit password  
6.PBC setting  
Page 70  
Set the Playback Control.  
(Video CD only)  
ON  
OFF  
Note  
•
If you change the setting in the Setup menu, the information of contents stays on even when the power is switched off.  
• An item which is not currently available is grayed in the Setup menus.  
EN  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the Setup menu  
Language setting  
Press [STOP C] if you are playing a disc.  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
1
.@/:  
1
ABC  
2
DEF  
3
Press [SETUP].  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
PQRS  
TUV  
8
WXYZ  
9
2
7
DISPLAY  
SPACE  
CLEAR  
Using [K / L], select “Playback”. Press [OK].  
0
Playback menu will appear.  
1
TITLE  
DISC MENU RETURN  
3
2
3
4
Using [K / L], select “Language”. Press [OK].  
Language menu will appear.  
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
RAPID PLAY PREV  
REC  
4
CM SKIP  
Using [K / L], desired item. Press [OK].  
Disc Menu Language (Default : English)  
Set the language for Disc Menu.  
• Using [K / L], select a  
Language  
Language - Disc Menu  
setting. Press [OK].  
Your setting will be activated.  
Disc Menu  
Audio  
English  
Original  
OFF  
English  
French  
Spanish  
Other  
Subtitle  
Audio Language (Default : Original)  
Set the Audio language.  
Language  
• Using [K / L], select a  
setting. Press [OK].  
Your setting will be activated.  
• When Original is selected, the  
audio language will be in the  
disc’s default language.  
Language - Audio  
Disc Menu  
Audio  
English  
Original  
OFF  
Original  
English  
French  
Spanish  
Other  
Subtitle  
Subtitle Language (Default : OFF)  
Set the Subtitle language.  
Language  
Language - Subtitle  
• Using [K / L], select a  
setting. Press [OK].  
Your setting will be activated.  
Disc Menu  
Audio  
English  
Original  
OFF  
OFF  
English  
French  
Spanish  
Other  
Subtitle  
EN  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the Setup menu  
Language setting (cont’d)  
If “Other” is selected, press 4-digit code using the Number buttons.  
Note  
• Only the languages supported  
by the disc can be selected.  
• Audio Language setting may  
not be available to some  
discs.  
• You can change or switch off  
the subtitles on a DVD disc  
also from the disc menu if it is  
available.  
Language - Subtitle  
• When you finish entering  
the code, press [OK].  
Refer to the language  
code table on page 74.  
Code Input  
-
-
-
-
• Press [CLEAR] or [s] to erase  
numbers entered incorrectly.  
PQRS  
7
TUV  
8
WXYZ  
9
REPEAT  
SETUP  
OK  
5
DISPLAY  
SPACE  
CLEAR  
0
Press [SETUP] to exit.  
5
TITLE  
DISC MENU RETURN  
Display setting  
Press [STOP C] if you are playing a disc.  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
1
.@/:  
1
ABC  
2
DEF  
3
Press [SETUP].  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
PQRS  
TUV  
8
WXYZ  
9
2
7
DISPLAY  
SPACE  
CLEAR  
Using [K / L], select “Display”. Press [OK].  
0
1
Display menu will appear.  
TITLE  
DISC MENU RETURN  
2
3
3
Using [K / L], select a desired item. Press [OK].  
REC MODE  
REV  
PLAY  
FWD  
OSD Language (Default : English)  
Set the language for the On Screen display.  
• Using [K / L], select a  
Display  
OSD Language  
setting. Press [OK].  
Your setting will be activated.  
OSD Language  
Angle Icon  
English  
ON  
English  
Français  
Español  
Screen Saver  
10 minutes  
Angle Icon (Default : ON)  
Set to “ON” to show the Angle Icon during the playback.  
• Using [K / L], select a  
setting. Press [OK].  
Your setting will be activated.  
Display  
Angle Icon  
OSD Language  
Angle Icon  
English  
ON  
ON  
OFF  
Screen Saver  
10 minutes  
Instructions continue on the next page.  
EN  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the Setup menu  
Display setting (cont’d)  
Screen Saver (Default : 10 minutes)  
Set the time to work the screen saver function on the screen.  
• Using [K / L], select a  
setting. Press [OK].  
Your setting will be activated.  
Screen Saver  
Display  
OSD Language  
Angle Icon  
English  
ON  
OFF  
5 minutes  
10 minutes  
15 minutes  
30 minutes  
Screen Saver  
10 minutes  
PQRS  
7
TUV  
8
WXYZ  
9
REPEAT  
SETUP  
OK  
DISPLAY  
SPACE  
CLEAR  
4
0
4
1
Press [SETUP] to exit.  
TITLE  
DISC MENU RETURN  
Audio setting  
GHI  
4
JKL  
MNO  
6
CH  
REPEAT  
SETUP  
OK  
Choose the appropriate Audio settings for your external  
equipment.  
It will only affect a disc playback.  
5
TUV  
PQRS  
WXYZ  
7
8
9
DISPLAY  
SPACE  
CLEAR  
0
Press [STOP C] if you are playing a disc.  
TITLE  
RETURN  
DISC MENU  
2
3
1
Press [SETUP].  
REC MODE  
REV  
PLAY  
FWD  
2
Note  
Using [K / L], select “Playback”. Press [OK].  
• Dynamic Range Control  
function is available only  
on the discs which are  
recorded in the Dolby  
Digital format.  
Playback menu will appear.  
3
Using [K / L], select “Disc Audio”. Press [OK].  
Digital Out  
Set the digital audio output.  
Disc Audio  
Digital Out  
PCM  
Dolby Digital  
48kHz  
Digital Out  
Dynamic Range Control  
Stream  
• Using [K / L], select a  
setting. Press [OK].  
ON  
Option window will appear.  
Proceed to step A or B.  
EN  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the Setup menu  
Audio setting (cont’d)  
Settings for PCM (Default : 48kHz)  
A
• Using [K / L], select a setting. Press [OK].  
Your setting will be activated.  
Digital Out - PCM  
Note  
48kHz  
96kHz  
When playing disc with  
copyright protection  
• Even if you select  
“96kHz”, the sound will  
be down sampled at  
48kHz.  
48kHz :If your amplifier/decoder is NOT  
compatible with 96kHz PCM, select  
“48kHz”. 96kHz sound will be output in  
48kHz.  
96kHz :If your amplifier/decoder is compatible  
with 96kHz PCM, select “96kHz”. 96kHz  
sound will be output.  
Settings for Dolby Digital (Default : Stream)  
B
• Using [K / L], select a setting. Press [OK].  
Digital Out - Dolby Digital  
Your setting will be activated.  
PCM  
Stream  
PCM  
:Convert the Dolby Digital into PCM (2 channel).  
When your amplifier/decoder is NOT compatible with Dolby Digital, set  
to “PCM”.  
Stream :Outputs Dolby Digital signals  
When your amplifier/decoder is compatible with Dolby Digital, set to  
“Stream”.  
Dynamic Range Control (Default : ON)  
Set to “ON” to compress the range between soft and loud sounds.  
Disc Audio  
Dynamic Range Control  
• Using [K / L], select a setting.  
Press [OK].  
Your setting will be activated.  
Digital Out  
Dynamic Range Control  
ON  
ON  
OFF  
PQRS  
7
TUV  
8
WXYZ  
9
REPEAT  
SETUP  
OK  
4
DISPLAY  
SPACE  
CLEAR  
Press [SETUP] to exit.  
0
4
TITLE  
DISC MENU RETURN  
EN  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the Setup menu  
Video setting  
Progressive Scan (Default : OFF)  
This unit is compatible with the Progressive Scan System. The feature provides you with the higher definition images  
than the traditional output system does. To utilize this feature, you must set Progressive Scan mode to “ON”.  
.@/:  
1
ABC  
2
DEF  
3
1
Press [SETUP].  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
PQRS  
TUV  
8
WXYZ  
9
7
2
DISPLAY  
SPACE  
CLEAR  
Using [K / L], select “Playback”. Press [OK].  
0
1
8
TITLE  
DISC MENU RETURN  
3
Using [K / L], select “Video”. Press [OK].  
2
3
4
5
6
7
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
4
RAPID PLAY PREV  
REC  
Using [K / L], select “Progressive Scan”. Press [OK].  
CM SKIP  
5
Video - Progressive Scan  
Using [K / L], select “ON”.  
Activating progressive scan:  
Check your TV has progressive scan  
and connect with component video cable.  
Press [OK].  
Confirmation window will  
appear.  
NOTE: If there is no picture or picture is  
distorted after selecting “Yes”,  
Wait about 15 seconds for auto recovery.  
Note  
•
If your TV is compatible with Progressive  
Scan (525p / 480p), you must use the  
Component video cable (commercially  
Yes  
Activate?  
No  
available) to connect this unit to the TV. (See  
Method 2 on page 13.) If not, use the video  
cable and set the Progressive Scan to “OFF”  
or press and hold [SETUP] for more than 3  
seconds during DVD playback.  
6
Using [{ / B], select “Yes”. Press [OK].  
7
• When selecting “No” or not pressing any  
Using [K / L], select “Yes” within 15 seconds. Press [OK].  
keys on the unit or remote control within  
15 seconds at step 7, Progressive Scan  
remains to be “OFF” (interlace scan).  
Your setting will be activated.  
8
Press [SETUP] to exit.  
Still Mode (Default : Auto)  
Select “Auto” usually.  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
.@/:  
1
ABC  
2
DEF  
3
Press [STOP C] if you are playing a disc.  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
PQRS  
TUV  
8
WXYZ  
9
1
7
DISPLAY  
SPACE  
CLEAR  
Proceed to steps 1 to 3 above.  
0
4
2
3
TITLE  
DISC MENU RETURN  
2
Using [K / L], select “Still Mode”. Press [OK].  
3
REC MODE  
REV  
PLAY  
FWD  
Using [K / L], select a setting. Press [OK].  
Your setting will be activated.  
Auto:  
Field:  
Optimum resolution setting (Field or Frame) will be selected.  
Images in the still mode will be stabilized.  
Frame: Images in the still mode will be highly defined.  
Note  
• Frame is 1 completed video image made  
up of 2 fields (There are 30 frame per  
second of NTSC video).  
4
Press [SETUP] to exit.  
EN  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the Setup menu  
Settings for Parental lock level  
Some DVD-Video discs feature a Parental Lock level. Playback will stop if the ratings exceed the levels you  
set, it will require you to enter a password before the disc will playback. This feature prevents your children  
from viewing inappropriate material.  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
Press [STOP C] if you are playing a disc.  
.@/:  
1
ABC  
2
DEF  
3
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
1
4
5
6
PQRS  
TUV  
8
WXYZ  
9
Press [SETUP].  
7
DISPLAY  
SPACE  
CLEAR  
0
1
2
TITLE  
DISC MENU RETURN  
Using [K / L], select “Playback”. Press [OK].  
Playback menu will appear.  
2
3
4
3
REC MODE  
REV  
PLAY  
FWD  
Using [K / L], select “Parental Lock”. Press [OK].  
Note  
4
• Parental lock function may not be  
available to some discs.  
Using [K / L], select the desired level. Press [OK].  
• With some DVDs, it may be difficult to  
find if they are compatible with parental  
lock. Be sure to check if the parental  
lock function operates in the way that  
you have set.  
• Record the password in case you forget it.  
Parental Lock (Default : All)  
Set the Parental Lock level.  
Playback  
Parental Lock  
• Using [K / L], change the  
parental level. Press [OK].  
Option window will appear  
Proceed to step A or B.  
Audio  
All  
8
Video  
7
Language  
Parental Lock  
6
All  
5
4
3
2
1
A password has not been set yet.  
A
Parental Lock  
Parental Lock  
Change password?  
Yes  
No  
Password Input  
Yes  
-
-
-
-
• Using the Number buttons,  
enter a new password. Press  
[OK].  
• Using [K / L], select “Yes”.  
Press [OK].  
• If you select “No”, proceed  
to step 5.  
Your setting will be activated.  
Instructions continue on the next page.  
EN  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the Setup menu  
Settings for Parental lock level (cont’d)  
A password has been set already.  
B
<Change the password>  
Parental Lock  
Parental Lock  
Parental Lock  
Change password?  
Yes  
Yes  
No  
Password Input  
Password Input  
-
-
-
-
* * * *  
• Using[K / L], select “Yes”.  
Press [OK].  
• Using the Number buttons,  
enter the current password.  
• Using the Number buttons,  
enter a new password. Press  
[OK].  
• If you select “No”, proceed  
to step 5.  
Your setting will be activated.  
5
Press [SETUP] to exit.  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
.@/:  
1
ABC  
2
DEF  
3
Note  
• Press [CLEAR] to erase numbers entered incorrectly.  
• When you forget the password or you want to clear  
all settings in Parental lock, enter 4,7,3,7 using  
the Number buttons in Password Input window.  
Password will be cleared and parental levels will be  
set to “All”.  
GHI  
JKL  
MNO  
CH  
REPEAT  
SETUP  
OK  
4
5
6
PQRS  
TUV  
8
WXYZ  
9
7
DISPLAY  
SPACE  
CLEAR  
0
5
TITLE  
DISC MENU RETURN  
Settings for PBC (Playback Control)  
PBC (Video CD only) (Default : ON)  
CD Playback Mode  
You can select images or information on the menu screen by  
activating PBC (Playback Control) function of Video CD.  
Random Play  
Program Play  
PBC (Video CD only)  
ON  
C
Press [STOP ] if you are playing a disc.  
1
Press [SETUP].  
PBC (Video CD only)  
ON  
2
OFF  
Using [K / L], select “CD Playback Mode”. Press [OK].  
CD Playback menu will appear.  
Note  
• When playing Video CDs with PBC  
function, some operations (e.g.  
select and track repeat) cannot be  
3
Using [K / L], select “PBC (Video CD only)”. Press [OK].  
performed. Select PBC function “OFF”  
to perform those operations.  
4
• PBC setting turns to “ON” when  
loading Video CDs with PBC  
function, thus, even after setting  
PBC to “OFF” and ejecting the  
Video CD then reloading the Video  
CD, this setting turns to “ON”  
automatically.  
Using [K / L], select “ON” or “OFF”. Press [OK].  
Your setting will be activated.  
EN  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Troubleshooting  
Before requesting service for this unit, check the table below for a possible cause of the problem you are  
experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore  
proper operation.  
Symptom  
Power  
Remedy  
The power does not turn on.  
• Check that the AC power cord is connected securely.  
• (In case of power failure) Check the breaker.  
Picture  
There is no picture.  
• Re-connect the connecting cords securely.  
• Check if the connecting cords are damaged.  
• If Setup menu appears on the TV screen, press  
[RETURN ] to exit.  
• Check the connection to your TV (page 13).  
• Check if the Progressive Scan mode is set correctly  
according to your TV (page 68).  
• Switch the input selector on your TV (such as to “EXT1”)  
so that the signal from the unit appears on the TV screen.  
Picture noise appears.  
• The disc is dirty or flawed.  
• If the picture output signal from the unit passes through  
your VCR to get to your TV, or if you are connected to a  
combination TV/VIDEO player, the copy-protection signal  
applied to some DVD programs could affect picture quality.  
If you still experience this problem even when you connect  
the unit directly to your TV, try connecting the unit to your  
TV's S-VIDEO input.  
TV program reception does not fill the  
screen.  
•
Try to set the channels with “Auto Channel Preset” or “Manual  
Channel Preset” in the Setup menu (pages 18-19).  
• Select a channel of any TV program using [CH K / L].  
TV program pictures are distorted.  
• Adjust TV antenna.  
• Adjust the picture (see the TV’s instruction manual).  
• Place the unit and TV farther apart.  
•
Place the TV and any bunched antenna cables farther apart.  
TV channels cannot be changed.  
Playback picture is distorted.  
• Switch the input to TV.  
• Connect the antenna cable correctly (page 13).  
• Keep the equipment which may cause electrical  
disturbances, such as a cellular phone, away.  
The playback picture or TV program  
from the equipment connected  
through the unit is distorted.  
• If the playback picture output from a DVD player, VCR or  
tuner goes through the unit before reaching your TV, the  
copy-protection signal applied to some programs could  
affect picture quality. Disconnect the playback equipment  
in question and connect it directly to your TV.  
Sound  
There is no sound.  
• The disc is dirty or flawed.  
• Re-connect all connections securely.  
• Check if the connecting cord is damaged.  
• Check the connections to the amplifier input.  
• The input source setting on the amplifier is incorrect.  
•
The recorder is in pause mode or in Slow-motion Play mode.  
• The recorder is in fast forward or fast reverse mode.  
•
If the audio signal does not come through the DIGITAL AUDIO  
OUTPUT (COAXIAL) jack, check the Audio settings (pages 66-67).  
Sound is noisy.  
• The disc is dirty or flawed.  
No DTS sound is output.  
• This unit is not compatible with DTS sound.  
Remote control  
The remote control does not function.  
• Batteries are weak.  
• There are obstacles between the remote control and the  
unit.  
• The remote control is far from the unit.  
• There are no batteries in the remote control.  
• Turn on the unit.  
•
The remote control is not pointed at the remote sensor on the unit.  
• If above remedies do not solve the problem, please call the Authorized Service Center for help.  
EN  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Troubleshooting (cont’d)  
Symptom  
Playback  
Remedy  
The disc does not play.  
• No disc is inserted.  
• A blank disc is inserted.  
• The disc is upside down. Insert the disc with the labeled  
side facing up.  
• The disc is not correctly inserted.  
• The unit cannot play certain discs (such as a CD-ROM)  
(page 38).  
• The region code on the DVD-Video does not match the  
unit (page 38).  
• Moisture has condensed inside the unit. Remove the disc  
and leave the unit turned on for about two hours until the  
moisture evaporates (page 4).  
• If the disc was recorded on another recorder, the unit  
cannot play the disc if it was not finalized.  
Playback image freezes for a second.  
• During the playback of two layered disc, picture may  
freeze for a moment when the 1st layer switches to the  
2nd layer. This is not a malfunction.  
The disc does not start playback from  
the beginning.  
•
•
Resume play was activated (page 42). Press [STOP  
C] twice.  
You have inserted a disc whose Title menu or DVD menu  
automatically appears on the TV screen when it is first insert.  
The unit starts playing from the disc  
automatically.  
• The DVD-Video features an auto playback function.  
Some functions such as Stop, Search, or  
Slow-motion Play cannot be performed.  
•
Depending on the disc, you may not be able to do some of the  
operations. See the instruction manual supplied with the disc.  
The language for the sound track  
cannot be changed.  
• Multilingual tracks are not recorded being played.  
• The DVD-Video prohibits the changing of the language for  
the sound track.  
• Try changing the language using the DVD-Video’s menu.  
The subtitle language cannot be  
changed or turned off.  
• Multilingual subtitle are not recorded on the DVD-Video.  
• The DVD-Video prohibits changing of the subtitles.  
• Try changing the subtitle using the DVD-Video’s menu.  
The angles cannot be changed.  
•
Multi-angles are not recorded on the DVD-Video being played.  
• The angle-change operation is whenever possible as long  
as the disc contains a multi-angle portion. Actual change  
will be performed when the portion has come up.  
• The DVD-Video prohibits changing angles.  
• Try changing the angle using the DVD-Video's menu.  
Recording/Timer Recording/Editing  
The channel cannot be changed from  
the channel you are recording.  
• Set the TV’s input to “TV.”  
Recording does not start immediately  
after you press [RECORD] or [REC].  
•
A brand-new DVD+RW or DVD-RW has been inserted. It takes a  
while for the unit to automatically format a DVD+RW/-RW.  
Nothing was recorded even though  
you set the timer setting correctly.  
• There was a power failure during recording.  
• The unit’s internal clock stopped due to a power failure  
that lasted for more than 30 seconds.  
Reset the clock (pages 21- 23).  
• Disconnect the AC power cord from the AC outlet, and  
connect it again.  
• The program contains copy protection signals that restricts  
copying.  
• The timer setting overlapped with another setting that has  
priority.  
Recording does not stop immediately  
after you press [STOP C].  
• It will take a few seconds for the unit to input disc data  
before recording can stop.  
Timer Recording is not complete or  
did not start from the beginning.  
• The timer setting overlapped with another setting that has  
priority (page 31).  
• Disc space was not enough.  
EN  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Troubleshooting (cont’d)  
Symptom  
Others  
Remedy  
The unit does not operate properly.  
• When static electricity, etc., causes the unit to operate  
abnormally, unplug the unit and then plug it in again.  
The disc tray does not open when you • It may take a few seconds for the disc tray to open after  
press [OPEN/CLOSE A].  
you have recorded or edited a disc.  
• This is because the unit is adding disc data to the disc.  
“Repairing” appears on the TV screen. • If there is a power failure or unplugging during recording,  
finalizing, formatting or editing (even after “Repairing”  
disappears), a Repairing process will begin automatically  
Repairing  
just after turning the unit on again.  
It may take several minutes up to about several hours.  
In a case you intend to cancel the  
Repairing process.  
• If you intend to cancel the Repairing process, press  
[OPEN/CLOSE A] on the front panel, then select “Yes”  
and press [OK]. After that, press [OPEN/CLOSE A] to  
take out the disc. The disc canceled the Repairing  
process MAY NOT work.  
Do you want to cancel a repairing process ?  
When selecting “Yes”, the disc may not be  
usable.  
Yes  
No  
Repairing  
Error message  
Cause  
Solution  
Disc Error  
--- Please eject the disc. ---  
Playback feature may not be  
available on this Disc.  
• Unplayable disc is inserted  
in the unit.  
• The disc is upside down.  
•
Insert the standardized disc  
which bear the marks on page 38.  
• Insert the disc with the labeled  
side facing up.  
Region Error  
• Playback is not authorized  
in the region of the DVD-Video  
disc which you inserted in the  
unit.  
• Insert the DVD-Video disc with  
region codes 1 or ALL.  
--- Please eject the disc. ---  
Playback is not authorized in your  
region.  
Parental Lock On  
The current selected parental level  
prohibits playback.  
• The current selected parental  
level in the SETUP Menu  
prohibits playback.  
• Check the “Parental Lock” setting  
(pages 69-70).  
Recording Error  
• You cannot record copy  
prohibited programs.  
• The recording function  
encountered the copy prohibited  
program.  
This program is not allowed  
to be recorded.  
Recording Error  
This program is not  
recordable in +VR mode.  
• You are trying to record the copy- • You cannot record the copy-  
once program.  
once program.  
• Insert the recordable disc, and  
ensure the disc status satisfies  
the recording requirements  
(page 24).  
Recording Error  
• You are trying to record onto the  
disc which is unrecordable, or the  
disc status is unable to record.  
• The disc is dirty.  
Can not record on this disc.  
•
Clean the disc with a cleaning cloth.  
• The disc is damaged.  
• Replace the disc.  
Recording Error  
• You are trying to record on to the • Release the disc protect setting  
protected disc which is set in the  
Disc Edit menu.  
in the Disc Edit menu (page 35).  
This disc is protected and not  
recordable.  
Recording Error  
Disc is full.  
(No area for new recording)  
• You are trying to record onto  
the disc which has no space  
for recording.  
• Insert the recordable disc with  
enough recording space.  
Recording Error  
You are trying to record onto the  
disc on which the number of  
recording titles comes up to the  
maximum (49).  
Delete unnecessary titles  
(page 52).  
You cannot record more  
than 49 titles on one disc.  
(The maximum is 49)  
EN  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Troubleshooting (cont’d)  
Error message  
Cause  
Solution  
Recording Error  
You are trying to record onto the  
VR mode DVD-RW disc on which  
the number of recording chapters  
comes up to the maximum (254).  
Delete unnecessary chapter  
marks (pages 54-55).  
You cannot record more than  
254 chapters on one disc.  
(The maximum is 254)  
When recordings are performed  
repeatedly onto an unstable disc,  
this area may come up to be full.  
Recording Error  
Insert a new disc.  
You cannot record on this  
disc as Power Calibration  
Area is full.  
Every time you insert a disc for  
recording, the disc's working area  
will be taken up. And if you repeat  
this frequently, it will be used up  
sooner and you may not be able to  
record full 49 titles.  
Recording Error  
You are trying to record onto  
the disc already finalized.  
Release the finalizing for this  
disc (page 36).  
This disc is already finalized.  
Recording Error  
You are trying to record onto  
the +VR formatting disc that had  
been recorded by the other  
Set “Replace Disc Menu”  
to “ON” to rewrite the menu,  
after that you will record to disc  
(page 26).  
The disc has a different menu  
layout. (Set “Replace Disc Menu”  
recorder.  
to ON to rewrite the menu.)  
* If you are still having trouble with the unit after checking “Troubleshooting”, write down the error code and the  
error description for calling our help line mentioned on the front page to locate an Authorized Service Center.  
Language code  
Language  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Amharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Basque  
Bengali;Bangla  
Bhutani  
Bihari  
Code  
Language  
French  
Frisian  
Galician  
Georgian  
German  
Greek  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Hebrew  
Hindi  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Interlingue  
Inupiak  
Code  
Language  
Code  
Language  
Sindhi  
Code  
4748  
4747  
4752  
6563  
4759  
4764  
5471  
4765  
4771  
4772  
4847  
5167  
4860  
5072  
4854  
4855  
4864  
4853  
5971  
4851  
5759  
4947  
7254  
4961  
5464  
4965  
5047  
6058  
5160  
5161  
5166  
5261  
5256  
5255  
5264  
5271  
5358  
5747  
5051  
5158  
5758  
5360  
5367  
5447  
5569  
5455  
5467  
5565  
5560  
5547  
5551  
5557  
5347  
5566  
5647  
5669  
5760  
5765  
5757  
6469  
5771  
6460  
5761  
5767  
5861  
5847  
5868  
5860  
Lithuanian  
Macedonian  
Malagasy  
Malay  
Malayalam  
Maltese  
Maori  
5866  
5957  
5953  
5965  
5958  
5966  
5955  
5964  
5961  
5960  
6047  
6051  
6061  
6149  
6164  
6159  
6247  
6265  
5247  
6258  
6266  
6367  
6550  
6555  
6565  
6557  
6558  
6561  
5165  
6567  
6569  
6568  
6658  
6653  
6647  
6666  
6651  
6654  
4861  
6655  
6661  
6665  
6664  
6657  
6669  
6757  
6764  
6772  
6855  
6861  
4971  
6961  
7054  
5655  
7161  
7267  
Singhalese  
Siswat  
Slovak  
Slovenian  
Somali  
Spanish  
Sundanese  
Swahili  
Swedish  
Tagalog  
Tajik  
Tamil  
Tatar  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga  
Tsonga  
Turkish  
Turkmen  
Twi  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapuk  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Marathi  
Moldavian  
Mongolian  
Nauru  
Nepali  
Norwegian  
Occitan  
Oriya  
Oromo (Afan)  
Panjabi  
Pashto; Pushto  
Persian  
Polish  
Portuguese  
Quechua  
Bislama  
Breton  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Chinese  
Corsican  
Croatian  
Czech  
Danish  
Dutch  
English  
Esperanto  
Estonian  
Faroese  
Fiji  
Irish  
Italian  
Japanese  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kinyarwanda  
Kirghiz  
Kirundi  
Korean  
Kurdish  
Laothian  
Latin  
Rhaeto-Romance 6459  
Romanian  
Russian  
Samoan  
Sangho  
Sanskrit  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Sesotho  
6461  
6467  
6559  
6553  
6547  
5350  
6564  
6554  
6566  
6660  
6560  
Latvian; Lettish  
Lingala  
Setswana  
Shona  
Finnish  
EN  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Glossary  
Analog audio  
Dolby Digital  
The system to compress digital  
sound developed by Dolby  
Laboratories. It offers you sound of world. This unit will only play discs  
stereo(2ch) or Multi-channel audio. that have compatible region codes.  
Regions code  
Regions associate discs and  
players with particular areas of the  
An electrical signal that directly  
represents sound. Compare this  
to digital audio which can be an  
electrical signal, but is an indirect  
representation of sound. See also  
Digital audio.  
You can find the region code of  
Finalize  
your unit by looking on the rear  
To make DVD discs, which have  
panel. Some discs are compatible  
been recorded on, possible to play  
with more than one region (or all  
in DVD players. With this unit, it  
regions).  
Aspect ratio  
The width of a TV screen relative  
to its height. Conventional TVs  
are 4:3 (in other words, the screen  
is almost square); widescreen  
models are 16:9 (the screen is  
almost twice as wide as it is high).  
is possible to finalize DVD-RW/  
Sampling frequency  
DVD-R/DVD+R/discs.  
The rate which sound is measured  
by a specified interval to turn into  
digital audio data. The numbers of  
sampling in one second defines  
as sampling frequency. The higher  
the rate, the better the sound  
quality as possible as it is.  
MP3 (MPEG Audio Layer 3)  
MP3 is a method of compressing  
files. You can copy MP3 files on  
CD-RW/R discs from the computer  
and play the files on this unit.  
Chapter  
Just as a book is split up into  
several chapters, a title on a  
DVD disc is usually divided into  
chapters. See also Title.  
PBC (Playback Control)  
(Video CD only)  
This function enables you to play  
back interactive software using a  
menu screen. See also Video CD.  
SAP  
(Secondary Audio Program)  
Component video output  
Sub-audio channel which is  
delivered separately from main-  
audio channel. This audio channel  
is used as an alternate in bilingual  
broadcasting.  
Each signal of luminance (Y)  
and component (PB/CB, PR/CR) is  
independent to output so that you  
can experience picture color as it is.  
Also, due to compatibility with  
progressive video (525p/480p),  
you can experience higher-density  
picture than that in interlace  
(525i/480i).  
PCM (Pulse Code Modulation)  
The most common system of  
encoding digital audio, found on  
CDs and DAT. Excellent quality,  
but requires a lot of data compared  
to formats such as Dolby Digital  
and MPEG audio. For compatibility  
with digital audio recorders (CD,  
MD and DAT) and AV amplifiers  
with digital inputs, this unit can  
convert Dolby Digital and MPEG  
audio to PCM. See also Digital  
audio.  
S-Video output  
It delivers independently  
each signal of color(C) and  
luminance(Y) to TV as video  
signals, so that higher-quality  
picture will be gained.  
Digital audio  
An indirect representation of sound  
by numbers. During recording,  
the sound is measured at discrete  
intervals (44,100 times a second  
for CD audio) by an analog-to-  
digital converter, generating a  
stream of numbers. On playback,  
a digital-to-analog converter  
generates an analog signal based  
on these numbers. See also  
Sampling frequency and Analog  
audio.  
Title (DVD only)  
A collection of chapters on DVD  
disc. See also chapter.  
Track  
Progressive Scan (525p/480p)  
Audio CDs use tracks to divide up  
the content of a disc. The DVD  
equivalent is called a chapter. See  
also Chapter.  
A type of display that does not  
split each frame into fields, and  
instead scans directly through  
all the scanlines of each frame  
in order. Progressive Scan  
provides less flickering and higher  
image resolution than traditional  
(525i/480i) TV signals. Refer  
to page 68 for instructions on  
selective Progressive Scan mode.  
Video CD  
The contents of a Video CD. When  
playing back a Video CD with the  
PBC function, the title menu will  
appear automatically.  
Frequently Asked Questions  
–– Can I record to CD-RW/R?  
No, this unit records only DVDs.  
–– Can I play DVD-Video that is bought in another country?  
Possible when the region code of the disc is 1 and All.  
–– Is this unit JPEG compatible?  
No.  
–– Can I connect the unit to my PC?  
No, you cannot control the unit by PCs.  
EN  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Specifications  
General  
System  
DVD-Video, DVD+RW/R, DVD-RW/R, CD-DA, CD-RW/R  
Power requirements  
Power consumption  
Weight  
AC120 V, 60 Hz  
20 W (standby: 1.6 W)  
5.06 lbs ( 2.3 kg )  
Dimensions (width x height x depth)  
Operating temperature  
Operating humidity  
TV format  
17 3/16" x 2 5/8" x 9 5/8" (435 x 66 x 244 mm)  
41F° to 104F° (5°C to 40°C)  
Less than 80% (no condensation)  
NTSC  
Recording  
Recording format  
DVD+VR format  
Recordable discs  
DVD+Rewritable, DVD+Recordable  
DVD-Rewritable, DVD-Recordable (+VR mode only)  
Video recording format  
Sampling frequency  
Compression format  
13.5MHz  
MPEG  
Audio recording format  
Sampling frequency  
Compression format  
48kHz  
Dolby Digital  
Tuner  
Receivable channels  
VHF  
2-13ch  
UHF  
CATV  
14-69ch  
C1-C125ch  
Input/Output  
VHF/UHF antenna input/output terminal  
VHF/UHF set 75Ω  
Video input  
Input level  
Jacks  
Input 1 (rear), 2 (front)  
1 Vp-p (75Ω)  
RCA jack  
Video output  
Output level  
Jack  
Output 1 (rear)  
1 Vp-p (75Ω)  
RCA jack  
S-Video input  
Input 1 (rear), 2 (front)  
1 Vp-p (75Ω)  
286 mVp-p (75Ω)  
4 pin mini DIN  
Y (Iuminance) - Input level  
C (color) - Input level  
Jacks  
S-Video output  
Output 1 (rear)  
1 Vp-p (75Ω)  
286 mVp-p (75Ω)  
4 pin mini DIN  
Y (Iuminance) - Output level  
C (color) - Output level  
Jack  
Component video output  
Output level  
Jacks  
Output 1 (rear)  
Y: 1.0 Vp-p (75Ω), PB/CB, PR/CR: 0.7 Vp-p (75Ω)  
RCA jacks  
Audio input  
During audio input  
Jacks  
Input 1 (rear), 2 (front) L/R  
2V rms (Input impedance: more than 22kΩ)  
RCA jacks  
Audio output  
During audio output  
Jacks  
Output 1 L/R (rear)  
2V rms (Output impedance: less than 1kΩ)  
RCA jacks  
Digital audio output  
Output level  
Jack  
Output 1 (rear) COAXIAL  
500 mVp-p (75Ω)  
RCA jack  
Note:  
The specifications and design of this product are subject to change without notice.  
EN  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Español  
Fácil grabación de DVD  
Estas instrucciones le ayudarán a entender fácilmente cómo grabar discos DVD.  
Nota:  
Asegúrese que las pilas están en el mando a distancia y que ha conectado correctamente esta unidad y el TV.  
Paso 1: Elija un tipo de disco.  
Puede elegir entre distintos tipos de discos DVD grabables.  
Este grabador de DVD puede grabar los siguientes tipos de  
discos.  
Paso 2: Encienda  
la unidad.  
Mando a distanci  
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
.@/:  
1
BC  
DEF  
3
GHI  
CH  
4
Seleccione la entrada a la que  
se conectará la unidad en su  
TV.  
Por ejemplo, cuando desea grabar repetidamente en  
el mismo disco, seleccione el disco de tipo regrabable  
DVD+RW/DVD-RW.  
Cuando desea guardar grabaciones sin alterarlos, un DVD no  
regrabable DVD+R/DVD-R puede ser más conveniente.  
Paso 4: Seleccione la  
velocidad de  
Paso 3: Coloque un disco en blanco.  
grabación.  
1
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
Para abrir  
.@/:  
1
ABC  
2
DEF  
3
GHI  
JKL  
MNO  
CH  
4
5
6
PQRS  
7
TUV  
8
WXYZ  
9
REPEAT  
2
REC MODE  
REV  
PLAY  
PAUSE  
FWD  
NEXT  
RAPID PLAREV  
REC  
CM SKIP  
3
STANDBY-ON  
OPEN/CLOSE  
TIMER  
PROG.  
ZOOM  
Para cerrar  
.@/:  
1
ABC  
2
DEF  
3
GHI  
JKL  
MNO  
CH  
4
5
6
PQRS  
7
TUV  
8
WXYZ  
9
REPEAT  
Cargando  
Formateando  
90%  
HQ (1Hr)  
0:58  
DVD+RW/DVD-RW solamente  
Esta operación puede demorar en reconocerse.  
ES  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Español  
Fácil grabación de DVD (cont.)  
Paso 5: Eleccione  
Paso 6: Grabe en  
discos  
Paso 7: Pare la  
grabación.  
el canal  
des eado.  
DVD.  
REC MODE  
REV  
PLAY  
FWD  
RAPID PLAY PREV  
REC  
PAUSE  
NEXT  
STANDBY-ON  
OPEN/CL
TIMER  
PROG.  
STOP  
CM SKIP  
ZOOM  
.@/:  
1
ABC  
2
DEF  
3
REC MODE  
REV  
PLAY  
PAUSE  
STOP  
FWD  
NEXT  
GHI  
JKL  
MNO  
CH  
4
5
6
RAPID PLAY PREV  
REC  
PQRS  
TUV  
8
WXYZ  
9
REPEAT  
SETUP  
7
CM SKIP  
DISPLAY  
SPACE  
CLEAR  
0
Escrit de datos  
90%  
1
GHI  
4
2
JKL  
5
3
MNO  
6
CH  
PQRS  
TUV  
WXYZ  
REPEAT  
1
SP (2Hr)  
7
8
9
NOV/21/06 11:00AM CH12 SP  
NOV/21/06 0:20:44  
2
EMPTY TITLE  
1:41:17 SP (2Hr)  
CH 12  
I
Esta operación puede  
demorar en completarse.  
Sugerencia 1: Reproduzca el contenido grabado  
Comience la  
grabación  
Pare la  
grabación  
Puede seleccionar el título que desea reproducir de un menú indicado y  
empiece a reproducir inmediatamente. El contenido grabado se puede  
acceder fácilmente con un simple procedimiento de elegir un título en la  
pantalla del menú.  
Pare/Comience  
Título 2  
Título 1  
¿Qué son títulos y capítulos?  
El contenido de un disco DVD se divide generalmente en títulos. Los títu-  
los pueden dividirse a su vez en capítulos.  
Capítulo 1 Capítulo 2 Capítulo 3 Capítulo1 Capítulo 2  
Sugerencia 2: Edite el disco grabado  
La edición de discos es fácil. Esta unidad ofrece convenientes funciones de edición para discos  
formateados en el modo DVD+VR.  
Puede editar lo siguiente desde el menú del título o el menú de ajuste.  
• Borrado de títulos  
• Poniendo nombres en títulos  
• Seleccionando/borrando marcas de capítulos  
• Ocultando capítulos  
• Seleccionando imágenes para índices  
• División de un título (DVD+RW/DVD-RW solamente)  
• Poniendo un nombre en disco  
Finalización de un disco  
• Esto permitirá que un disco DVD+R/DVD-RW/DVD-R que se grabe en nuestra unidad pueda ser reproducido  
en un reproductor DVD diferente. Un disco sin finalizar no se podrá reproducir en otro reproductor.  
•
Después de finalizar un disco, no puede editar los contenidos en ese disco.  
• Los discos DVD+RW no requieren finalización, pero sí “Compatibilizar edic.” para reproducirse en otras  
unidades después de ediciones. Puede editar el disco después de “Compatibilizar edic.” .  
ES  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
EN  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY  
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or  
workmanship as follows:  
DURATION:  
PARTS:  
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year  
from the date of original retail purchase. Certain parts are excluded from this warranty.  
LABOR:  
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from  
the date of original retail purchase.  
LIMITS AND EXCLUSIONS:  
This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original  
retail purchase will be required together with the product to obtain service under this warranty.  
This warranty shall not be extended to any other person or transferee.  
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced,  
missing or if service was attempted by an unauthorized service center. This limited warranty does not  
apply to any product not purchased and used in the United States.  
This product is produced for home use and this warranty only covers failures due to defects in material  
or workmanship which occurs during normal use. It does not cover damage which occurs in shipment, or  
failures which are caused by repairs, alterations or product not supplied by FUNAI CORP., or damage  
which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation,  
improper maintenance, commercial use such as hotel, rental or office use of this product or damage which  
results from fire, flood, lightning or other acts of God.  
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT  
REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR  
MODELS.  
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR  
ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED  
BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU  
OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE  
PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY,  
AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS  
REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS  
MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID  
WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.  
IMPORTANT:  
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS  
THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD,  
YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE  
CONTACT FUNAI CORP.  
ATTENTION:  
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT  
WITHOUT PRIOR NOTICE.  
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:  
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its  
original packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE  
CENTER. FUNAI CORP. will not reimburse you for any service done by unauthorized service providers  
without prior written approval.  
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries,  
please contact us at:  
FUNAI CORPORATION  
Customer Service  
Tel :1-800-518-1180  
http://www.funai-corp.com  
19900 Van Ness Avenue, Torrance, CA 90501  
Printed in China  
E7A20UD  
1VMN23108 ★★★★  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OUT  
IN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Eiki Projector EIP 2500 User Manual
Ferrari Automobile 512 TR User Manual
Fisher Paykel Refrigerator ActiveSmart User Manual
Fisher Price Baby Monitor J6998 User Manual
Fujitsu Scanner P3PC 3662 01ENZ0 User Manual
Furuno Radar Detector FAR 2817 User Manual
Gardena Lawn Mower HE32 User Manual
GBC Paper Shredder GDHS7 User Manual
GE Refrigerator 200D9366P004 User Manual
Gitzo Camcorder Accessories GT3531 User Manual