Owner’s Manual
MBP5120F/F7
Blu-ray Disc / DVD Player
© 2010 Funai Electric Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO-TV INTERFERENCE
IMPORTANT COPYRIGHT INFORMATION
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses,
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more
of the following measures:
Unauthorized copying, broadcasting, public
performance and lending of discs are prohibited.
This item incorporates copy protection
technology that is protected by U.S. patents
and other intellectual property rights of
Rovi Corporation. Reverse engineering and
disassembly are prohibited.
Do not place the unit on the furniture that is
capable of being tilted by a child and an adult
leaning, pulling, standing or climbing on it. A
falling unit can cause serious injury or even
death.
This apparatus should not be placed in a built-in
installation such as a bookcase or rack unless
proper ventilation is provided.
Make sure to leave a space of 3.9 inches (10cm)
or more around this apparatus.
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the
equipment and receiver.
To Avoid the Hazards of Electrical Shock and
Fire
3) Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Do not handle the AC power cord with wet
hands.
4) Consult the dealer or an experienced radio/
TV technician for help.
• Do not pull on the AC power cord when
disconnecting it from an AC outlet. Grasp it by
the plug.
• Do not put your fingers or objects into the unit.
Location and Handling
• Do not install the unit in direct sunlight, near
strong magnetic fields, or in a place subject to
dust or strong vibration.
• Avoid a place with drastic temperature changes.
• Install the unit in a horizontal and stable
position. Do not place anything directly on
top or bottom of the unit. Depending on your
external devices, noise or disturbance of the
picture and/or sound may be generated if the
unit is placed too close to them. In this case,
please ensure enough space between the
external devices and the unit.
• Depending on the environment, the
temperature of this unit may increase slightly.
This is not a malfunction.
• Be sure to remove the disc and unplug the AC
power cord from the outlet before carrying the
unit.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
Disconnect the mains plug to shut off when find
trouble or not in use. The mains plug shall remain
readily operable.
CAUTION: Danger of explosion if battery is
incorrectly replaced. Replace only
with the same or equivalent type.
WARNING: Batteries (Battery pack or battery
installed) shall not be exposed to
excessive heat such as sunshine,
fire, or the like.
LASER SAFETY
This apparatus employs a laser. Only a qualified
service person should remove the cover or
attempt to service this apparatus, due to possible
eye injury.
CAUTION: Use of controls or adjustments
or performance of procedures
other than those specified herein
may result in hazardous radiation
exposure.
Dew Condensation Warning
• Dew condensation may form inside the unit in
the following conditions. If so, do not use this
unit at least for a few hours until its inside gets
dry.
CAUTION: Laser radiation when open. Do not
stare into beam.
LOCATION: Inside, near the BD mechanism.
- The unit is moved from a cold place to a warm
place.
- Under conditions of high humidity.
- After heating a cold room.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Note about Recycling
© 2010 Funai Electric Co., Ltd.
• This unit’s packaging materials are recyclable
and can be reused. Please dispose
of any materials in accordance with
your local recycling regulations.
• Batteries should never be thrown
away or incinerated but disposed
of in accordance with your local regulations
concerning chemical wastes.
All rights reserved. No part of this manual may be
reproduced, copied, transmitted, disseminated,
transcribed, downloaded or stored in any storage
medium, in any form or for any purpose without
the express prior written consent of Funai.
Furthermore, any unauthorized commercial
distribution of this manual or any revision hereto
is strictly prohibited.
Notice for Progressive Scan Output
Information in this document is subject to change
without notice. Funai reserves the right to change
the content herein without the obligation to
notify any person or organization of such changes.
with the design is a registered trademark of
Funai Electric Co., Ltd. and may not be used in any way
without the express written consent of Funai. All other
trademarks used herein remain the exclusive property
of their respective owners. Nothing contained in this
manual should be construed as granting, by implication
or otherwise, any license or right to use any of the
trademarks displayed herein. Misuse of any trademarks
or any other content in this manual is strictly prohibited.
Funai shall aggressively enforce its intellectual property
rights to the fullest extent of the law.
• Consumers should note that not all high
definition television sets are fully compatible
with this product and may cause artifacts to
be displayed in the picture. In case of picture
problems with 480 progressive scan output,
it is recommended that the user switch the
connection to the ‘standard definition’output.
If there are questions regarding your TV set
compatibility with this 480p BD/DVD player,
please contact our customer service center.
ENERGY STAR® is a joint program of
the U.S. Environmental Protection
Agency and the U.S. Department of
Energy helping us all save money
and protect the environment
through energy efficient products
and practices.
Supplied Accessories
• Remote Control (NB904UD/NB954UD)
• Batteries (AAA, 1.5V × 2)
• Audio / video cables
• Quick Start Guide
• Wireless Network Connection Guide
• VUDU sheet
4
Download from Www.Somanuals.com. All Manuals Search And Download.
NETWORK OPERATIONS..............................................25
VUDU Operations...................................................................25
Before Activating VUDU...................................................25
Activating VUDU.................................................................25
Guide to VUDU Menu Screen.........................................25
Renting or Purchasing VUDU Movies /
CONTENTS
INTRODUCTION................................................................2
Safety Instructions................................................................... 2
Supplied Accessories.............................................................. 4
Trademark Information.......................................................... 6
Front Panel ................................................................................. 7
Rear Panel................................................................................... 7
Remote Control ........................................................................ 8
Installing the Batteries in the Remote Control.............. 9
Opening Screen........................................................................ 9
CONNECTIONS ...............................................................10
Connection to the TV............................................................10
Connection to an Audio System.......................................11
2-Channel Analog Audio Connection.........................11
Digital Audio Connection................................................11
HDMI Audio Connection..................................................11
Connection to the Network ...............................................12
Wired Connection..................................................................12
Wireless Connection.............................................................13
Finding the Video Channel on Your TV...........................13
PLAYBACK.........................................................................14
Information on Playback.....................................................14
Playable Discs and Files....................................................14
Unplayable Discs and Files..............................................14
Region Codes.......................................................................15
On-Screen Display..............................................................15
How to Insert a Disc ..............................................................15
Reading the SD Memory Card...........................................16
Selecting the Media Mode .................................................16
Playing Back (BD / DVD).......................................................16
Using the Title / Disc / Pop-up Menu..............................17
Playing Back (Audio CD / JPEG Files)...............................17
KODAK Picture CD .................................................................18
Fast Forward / Fast Reverse................................................19
Slow Forward Playback........................................................19
Step by Step Playback..........................................................19
Repeat Playback .....................................................................19
Program Playback..................................................................19
Random Playback ..................................................................20
Rapid Playback........................................................................21
Adjusting the Picture............................................................21
Virtual Surround.....................................................................21
PIP (BONUSVIEW) Setting ...................................................22
Camera Angle..........................................................................22
Enjoying BD-Live Discs with Internet .............................22
Search.........................................................................................23
Using [the Number buttons] (Direct Search) ...............23
Switching Subtitles................................................................23
Switching Audio Soundtrack.............................................24
Setting the BD Audio Mode ...............................................24
TV Episodes...........................................................................26
Watching Rented or Purchased VUDU Movies / TV
Episodes.................................................................................26
Using Internet Applications ...............................................26
FUNCTION SETUP..........................................................26
Quick......................................................................................26
Custom..................................................................................27
Language ..........................................................................27
Video....................................................................................27
Audio ..................................................................................28
HDMI Audio Out Setting..................................................29
Digital Out Setting .............................................................29
Speaker Setting (Available when you have HDMI
cable connected to HDMI OUT jack) ...........................30
Parental................................................................................32
Others ...............................................................................33
fun-Link (HDMI CEC)..........................................................35
Network Connection ............................................................36
Connection Test ..................................................................36
Network Selection..............................................................36
Software Update.................................................................41
Current Version....................................................................41
Initialize .....................................................................................42
OTHERS .............................................................................43
Troubleshooting.....................................................................43
Language Code List...............................................................45
Servicing ...................................................................................45
Specifications ..........................................................................46
NETWORK SERVICE DISCLAIMER .............................46
Network Service Disclaimer ...............................................46
LIMITED WARRANTY....................................back cover
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Trademark Information
“BONUSVIEW”is
trademark of Blu-ray
Disc Association.
HDMI, the HDMI Logo,
and High-Definition
Multimedia Interface
are trademarks or
registered trademarks
of HDMI Licensing LLC
in the United States
and other countries.
"BD-Live" and
"BD-Live" logo are
trademarks of Blu-ray
Disc Association.
VUDUTM is a trademark
of VUDU, Inc.
Manufactured under
license from Dolby
Laboratories. Dolby and
the double-D symbol
are trademarks of Dolby
Laboratories.
“Blu-ray Disc“ and
are trademarks.
Manufactured under
license under U.S.
Patent #’s:5,451,942;
5,956,674; 5,974,380;
5,978,762; 6,487,535
& other U.S. and
is a trademark of DVD Format/Logo Licensing
Corporation.
worldwide patents
issued & pending. DTS
and the Symbol are
registered trademarks,
& DTS-HD, DTS-HD
Advanced Digital Out
and the DTS logos are
trademarks of DTS,
Inc. Product includes
software. © DTS, Inc. All
Rights Reserved.
Kodak and KODAK Picture CD
Compatible are trademarks
of Kodak used under license.
Java and all Java based
trademarks and logos
are trademarks or
registered trademarks
of Oracle and/or its
affiliates.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
1
2*
3
4
5* 6 7 8
OPEN/
CLOSE
SD card
9
(*) The unit can also be turned on by pressing
these buttons.
1. Disc tray
8. y STANDBY/ON button
2. A OPEN/CLOSE button*
3. Infrared sensor window
4. C STOP button
• Press to turn on the unit, or to turn the unit
into the standby mode. (To completely turn
off the unit, you must unplug the AC power
cord.)
5. B PLAY button*
6. PLAY indicator
• Press and hold for 10 seconds to shut down
the unit.
9. SD card slot
• This indicator lights up in green when discs or
SD cards play back.
7. STANDBY/ON indicator
• This indicator lights up in red when the power
is in the standby mode.
Note
• This unit will be turned into the standby mode
automatically after 25 minutes of no action.
Rear Panel
2
3
4 5
6
1
COAXIAL
L
Wireless LAN
LAN
HDMIOUT
R
AUDIO
OUT
VIDEO
OUT
7
1. AC power cord
2. LAN terminal
Note
• Do not touch the inner pins of the jacks on the
rear panel. Electrostatic discharge may cause
permanent damage to the unit.
• This unit does not have the RF modulator.
• Do not try to rip the internal wireless LAN from
the unit.
3. HDMI OUT jack
4. AUDIO OUT jacks
5. DIGITAL OUT (COAXIAL) jack
6. Wireless LAN (Internal)
7. VIDEO OUT jack
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
8. H (skip) button
• During playback, press once to return to the
beginning of the current title, chapter or
track.
• During playback, press twice to return to the
previous title, chapter or track.
• During the JPEG playback, press to return to
the previous file.
STANDBY/ON
1
2
13*
14
9. C (stop) button
• Press to stop playback.
10. Number buttons
3
4
5
• Press to enter the title, chapter, track or file
number.
• Press to enter values in the input field.
11. SEARCH button
• Press to display the search menu.
12. REPEAT button
15
• Press to toggle between various repeat
modes.
16
17
13. OPEN/CLOSE A button*
• Press to open or close the disc tray.
14. POP MENU / MENU button
• Press to display the pop-up menu / disc
menu.
6
7*
8
18
19
20
9
15. OK button
• Press to confirm or select menu items.
16. RETURN button
10
21
22
23
24
25
• Press to return to the previously displayed
menu screen.
17. D (forward) button
• During playback, press to fast forward the
playback.
11
12
• In pause mode, press to slow forward the
playback.
18. G (skip) button
• During playback, press to skip to the next
title, chapter, track or file.
19. F (pause) button
(*) The unit can also be turned on by pressing
these buttons.
• Press to pause playback.
• When playback is in pause mode, press
repeatedly to forward the playback step by
step.
1. STANDBY/ON y button
• Press to turn on the unit, or to turn the unit
into the standby mode. (To completely turn
off the unit, you must unplug the AC power
cord.)
20. DISPLAY button
• Press to display the on-screen display menu.
21. ANGLE button
2. RED / GREEN / BLUE / YELLOW button
• Press to select items on some BD menus.
• When file list / thumbnail list is shown, press
to switch between pages.
• Press to access various camera angles on the
disc.
• Press to rotate the JPEG files clockwise by 90
degrees.
3. TOP MENU button
• Press to display the top menu.
• During VUDU feature screen is displayed
(except during playback), press to exit.
4. K/ L/s/B buttons
22. SUBTITLE button
• Press to display the subtitle menu.
23. AUDIO button
• Press to display the audio menu.
• Press to select items or settings.
5. SETUP button
• Press to display or to exit the setup menu.
6. E (reverse) button
• During playback, press to fast reverse the
playback.
7. B (play) button*
• Press to start playback or resume playback.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
24. MODE button
Opening Screen
In stop mode, opening screen is displayed.
• During BD or DVD playback, press to display
the setting for the rapid playback and the
picture adjustment.
• During BD, DVD and CD playback, press to
display the setting for the virtual surround.
• During BD playback, press to turn the picture-
in-picture feature on or off (only applicable to
BD-video which supports the PIP function).
• During the JPEG playback, press to display
menus for changing the visual effect for
switching the image or changing the size of
the image.
Watch HD movies
press the red button to continue
• In stop mode with audio CD or JPEG files
inserted, press to display menus for program
and random playback.
“VUDU”:
To access the VUDU App Home
screen
• In stop mode with BD inserted, press to
display a menu for setting the BD audio
mode.
25. CLEAR button
• Press to clear the information once entered or
to cancel the programming for audio CD, etc.
Installing the Batteries in the Remote Control
Install AAA (1.5V) battery × 2 matching the
polarity indicated inside battery compartment of
the remote control.
Note
Incorrect use of batteries can result in hazards
such as leakage and bursting. Please observe
the following:
• Do not mix alkaline, standard (carbon-zinc), or
rechargeable (ni-cad, ni-mh, etc) batteries.
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together.
Although they may look similar, different
batteries may have different voltages.
• Make sure that the + and - ends of each
battery match the indications in the battery
compartment.
• Remove batteries from battery compartment
that are not going to be used for a month or
more.
• When disposing of used batteries, please
comply with governmental regulations or
environmental public rules that apply in your
country or area.
• Do not recharge, short-circuit, heat, burn or
disassemble batteries.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connection to the TV
HDMI Video / Audio Connection
(Supports up to 1080i / 1080p, 1080p24 resolution.)
Your TV
COAXIAL
L
Wireless LAN
LAN
HDMIOUT
R
AUDIO
OUT
VIDEO
OUT
HDMI IN
HDMI cable(not supplied)
HDMIOUT
• No analog audio connection required.
• Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection.
• High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for optimal
compatibility.
Picture is not displayed on the TV screen ...
The indicators blink under the following conditions.
• When the connected device does not support HDCP.
• When the connected device is recognized as an HDCP incompatible by HDMI SRM.
• When the connected device supports HDCP but cannot be recognized as an HDCP compatible for
some reason.
The indicators blink as follows for 30 seconds.
SD card
Standard Video + Standard Audio Connection
(Supports only 480i resolution.)
Your TV
COAXIAL
L
Wireless LAN
LAN
HDMIOUT
R
AUDIO
OUT
VIDEO
OUT
L
L
VIDEO IN
AUDIO IN
Video cable(supplied)
Audio cable(supplied)
R
R
AUDIO
OUT
VIDEO
OUT
• Connect this unit directly to the TV. If the audio / video cables are connected to a VCR, pictures may be
distorted due to the copy right protection system.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to an Audio System
• When you change the connections, all devices should be turned off.
• Refer to the manual accompanying external devices for more information.
2-Channel Analog Audio Connection
stereo system
Digital Audio Connection
AV receiver/amplifier
AUDIO IN
R
L
DIGITAL AUDIO INPUT
COAXIAL
Analog audio input jacks
Digital audio coaxial
input jack
Digital audio cable
(not supplied)
Audio cable
(supplied)
COAXIAL
COAXIAL
L
L
L
Wireless LAN
LAN
HDMIOUT
LAN
HDMIOUT
R
R
AUDIO
OUT
VIDEO
OUT
AUDIO
OUT
V
R
AUDIO
OUT
AUDIO OUT
DIGITAL OUT (COAXIAL)
To set up “Digital Out”, refer to page 29.
HDMI Audio Connection
AV receiver/amplifier with an HDMI input jack
COAXIAL
HDMI IN
L
Wireless LAN
HDMI cable
(not supplied)
LAN
HDMIOUT
R
AUDIO
OUT
VIDEO
OUT
HDMIOUT
To set up “HDMI Audio Out”, refer to page 28.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to the Network
By connecting this unit to the Internet, you can access VUDU services and applications, BD-Live features
on a Blu-ray Disc and perform network update.
- For more information about software update, refer to “Network Update”on page 41.
- For more information about BD-Live, refer to “Enjoying BD-Live Discs with Internet”on page 22.
- For more information about VUDU, refer to“VUDU Operations”on page 25.
Note
• Wired connection is recommended when using following features. (Using following features with
wireless connection can be affected by other devices using radio frequencies.)
- Video streaming services (VUDU)
- Network update
Wired Connection
Make the following connection if you are using a wired router.
Hub or broadband router
Networking equipment
(modem,etc.)
WAN
LAN
LAN
5
4
3
2
1
LAN cable(not supplied)
LAN cable(not supplied)
Internet
LAN
COAXIAL
L
Wireless LAN
LAN
HDMIOUT
R
AUDIO
OUT
VIDEO
OUT
Note
• After you made a wired connection, set up necessary network settings. (For network setting of wired
connection, refer to “Wired”on page 36.)
• Do not insert any cable other than a LAN cable to the LAN terminal to avoid damaging the unit.
• If your network equipment (modem, etc.) does not have broadband router functions, connect a wired
broadband router.
• If your network equipment (modem, etc.) has broadband router functions but there is no vacant port,
use a hub.
• For a wired broadband router, use a router which supports 10BASE-T/100BASE-TX.
• Do not connect your PC directly to the LAN terminal of this unit.
• Please purchase shielded LAN cables at your local store and use them when you connect to network
equipment.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless Connection
Make the following connection if you are using a wireless router.
Networking equipment
(modem,etc.)
COAXIAL
L
Wireless LAN
LAN
HDMIOUT
R
AUDIO
OUT
VIDEO
OUT
Internet
LAN
WAN
Hub or wireless broadband router
LAN cable(not supplied)
Note
• After you made the wireless connection, set up necessary network settings.
(For network setting of wireless connection, refer to “Wireless”on page 38.)
• For a wireless router, use a router which supports IEEE 802.11 b/g/n.
(n is recommended for stable operation of the wireless network.)
• Set the wireless router to Infrastructure mode. This unit does not support Ad-hoc mode.
• Other radio devices or obstacles may cause interference to the wireless network connection.
Finding the Video Channel on Your TV
After you have completed all the connections, you must find the correct video channel (external input
channel) on your TV.
1 After you have made all the necessary connections, press [STANDBY/ON y ] to turn on the unit.
2 Turn on your TV.
3 Press the button on the TV’s remote control that accesses the external input channel. It may be
labeled “SOURCE”, “AV” or “SELECT” (refer to your TV’s user manual).
Watch HD movies
press the red button to continue
Note
• If the TV is connected by an HDMI cable, it may take a while for the opening picture to come up.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
• Portions of this product are protected under
copyright law and are provided under license
by ARIS / SOLANA / 4C.
• Please keep the SD Memory Cards in their cases
when you are not using them.
• Do not try to open or modify the card.
• Do not touch the terminal surface with your
fingers or any metals.
• Do not attach additional labels or stickers to
cards.
• Do not remove the label of the SD Memory
Cards.
• This unit recognizes up to 8 characters of file
name in the SD Memory Card. Characters after
8th will not be displayed.
PLAYBACK
Information on Playback
Before you start playing back a disc, read the
following information.
Playable Discs and Files
Playable discs
Blu-ray Disc
- BD-video (single / dual layer)
- BD-RE ver. 2.1 (single / dual layer)
(Recorded in BDMV format)
- BD-R ver. 1.1 / 1.2 / 1.3 (single / dual layer)
(Recorded in BDMV format)
(Unclosed discs may not be played back.)
DVD-video
DVD-RW
DVD-R
CD-DA (audio CD)
CD-RW
CD-R
Unplayable Discs and Files
• CD-ROM
• CD-I (compact disc-interactive)
• DVD-RAM
• VSD (video single disc)
• DVD-audio
KODAK Picture CD
DTS-CD
• Video CD
• HD DVD
• SVCD
Playable files
Media
• Unfinalized disc
JPEG
BD-RW/-R
DVD-RW/-R
CD-RW/-R
SD Memory Card
(including SDHC)
miniSD Card
microSD Card
• BD-RE (ver.1.0)
• BD-RE (ver.2.1) (Recorded in BDAV format)
• BD-R (ver.1.1 / 1.2 / 1.3) (Recorded in BDAV
format)
• BD / DVD / CD / SD Memory Card contains MP3
/ WMA, and DivX® files
• BD/DVD hybrid disc (played back as a BD-video
only)
• DVD-RW/-R recorded in non compatible
recording format
• Super Audio CD - Only the sound on the CD
layer can be heard. The sound on the high-
density Super Audio CD layer cannot be heard.
• Playability of dual discs are not guaranteed.
Readable cards
Playable files /
data
SD Memory Card (8 MB - 2 GB) JPEG, picture-
SDHC Memory Card
(4 GB - 8 GB)
miniSD Card (8 MB - 2 GB)
microSD Card (8 MB - 2 GB)
in-picture
commentary,
subtitles or other
extras for BD-ROM
ver. 2 (Profile 2.0 /
Profile 1.1)
Note for SD Memory Cards
• This unit supports SD Memory Card with FAT12/
FAT16 file system, and SDHC Memory Card with
FAT32 file system.
• This unit does not support NTFS file system.
• This unit may not read SD Memory Cards
formatted on a computer. If that is the case,
please reformat the SD Memory Cards in this
unit and try again.
• This unit does not support miniSDHC and
microSDHC Memory Card.
• For miniSD Card and microSD Card, an adapter
is necessary.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Region Codes
ꢀ Disc information
1
2
This unit has been designed to play back BD-video
with region “A”and DVD-video with region “1”
or “ALL”. You cannot play back BD-video or DVD-
video that are labeled for other regions. Look for
the symbols on your BD-video or DVD-video.
If these region symbols do not appear on your BD-
video or DVD-video, you cannot play back the disc
in this unit. The letter or number inside the globe
refers to region of the world. A BD-video or DVD-
video labeled for a specific region can only be
played back in the unit with the same region code.
1 / 14
0 : 00: 51
T
1.Current track number / Total number of
tracks
2.Elapsed time (or remaining time) of the
current disc
ꢀ File name information
1
File_name_001
1.Media icon and file name
On-Screen Display
: JPEG file
ꢀ Decoding format information
You can check information about the current disc
by pressing [DISPLAY].
To call the on-screen display menu, press
[DISPLAY] during playback. Every time you press
[DISPLAY], the information changes. Depending
on the media, available information varies.
1
Dolby Digital
1.Decoding format
ꢀ Chapter information
How to Insert a Disc
<Title / Chapter information for BD>
1. Press [OPEN/CLOSE A] to open the disc tray.
2. Place the disc on the disc tray with its label
side facing up.
1
2
3
4
5
1
1/10
T
<Chapter information for DVD>
2
6
Align the disc to the disc tray guide.
3 / 5
0 : 01 : 02
1.Current title number
• Make sure the disc is compatible with this
unit. (Refer to page 14 for the list of compatible
discs.)
2.Current chapter number / Total number of
chapters
3.Current repeat setting (Only when repeat
setting is active)
3. Press [OPEN/CLOSE A] to close the disc tray.
It may take a while to load the disc.
(C: Chapter repeat, T: Title repeat)
4.Indicates that the multi camera angle images
are available on the scene
To eject the disc:
Press [OPEN/CLOSE A] to open the disc tray.
Remove the disc.
5.Current playback status
6.Elapsed time (or remaining time) of the
Press [OPEN/CLOSE A] to close the disc tray.
current chapter
ꢀ Title information
1
2
3 / 5
0 : 01 : 02
1.Current title number / Total number of titles
2.Elapsed time (or remaining time) of the
current title
ꢀ Track / File information
1
2
3
4
1 / 14
0 : 00: 51
SD
G
1.Current track (file) number / Total number of
track(file)
2.Elapsed time (or remaining time) of the
current track (except for JPEG files)
3.Indication of SD Memory Card playback
4.Current repeat setting
(Only when repeat setting is active)
(T: Track repeat, G: Group repeat,A: All
repeat)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Media Mode
Reading the SD Memory Card
For the playback media to be read by this unit, the
correct media mode should be selected. You can
switch the media mode by following the steps
below.
You can play back the JPEG files in an SD Memory
Card.
With the SD Memory Card, you can also enjoy the
following functions.
- Special additional contents for BD-ROM Profile 1
ver.1.1. (For more information about the special
additional contents, refer to the instruction book
that came with the disc.)
1. In stop mode, press [SETUP].
2. Use [K/L] to select , then press [OK] .
3. Use [K/L] to select “Mode Select”, then press
[OK].
- BD-Live function (BD-ROM ver. 2 Profile 2.0). (For
more information about BD-Live, refer to page 22.)
Quick
1. Insert an SD Memory Card, with the label
side facing up, into the SD card slot until it
clicks.
Mode Select
HDMI Audio Out
HDMI Video Resolution Auto
Player Menu
Disc
HDMI Multi(Normal)
• If no disc is in operation, “Media Select”
screen will appear on the TV screen.
English
Wired
Network Selection
2. Use [K/L] to select “SD Card”, then press
[OK].
3. Use [K/L] to select a desired track, folder
or file, then press [OK]. Use [s/B] to
go backward and forward between the
hierarchies.
4. Use [K/L] to select the desired media mode,
then press [OK].
5. Press [SETUP] to exit.
• Selected media mode is now activated.
• If you press [OK] on the desired file, playback
will start.
Even if you turn the unit to the standby mode in
“SD Card”or “Network”mode, it will be in “Disc”
mode the next time you turn it on.
To remove the SD Memory Card:
In stop mode, gently push in the SD Memory
Card, then pull it out slowly.
Note
Playing Back (BD / DVD)
1. Press [STANDBY/ON y ].
• The “Media Select”screen will disappear under
the conditions listed below:
2. Turn on the TV and select the appropriate
input on the TV to which the unit is
connected.
- when the screen saver is activated.
- when [RETURN] is pressed.
- when the setup menu is called up.
• If the “Media Select”screen disappears before
you make the selection, refer to “Selecting the
Media Mode”on page 16.
3. Insert a disc (refer to “How to Insert a Disc”
on page 15 ).
4. Playback may start automatically.
If not, press [B (play)].
• Some discs may show a title or a disc menu.
In such case, refer to “Using the Title / Disc /
Pop-up Menu”on page 17.
• Do not remove the SD Memory Card or turn the
unit to the standby mode while the contents
of the card are in playback. It may result in
malfunction or loss of the card’s data.
• Do not delete the folders or files in the SD
Memory Card with your computer. This unit
may not read SD Memory Cards formatted on a
computer.
• If a folder or file name includes one of the
following unrecognizable characters, the folder
or file name may not be displayed correctly.
- Unrecognizable characters : . , “ = + [ ] ; / \ : | ¥
• For an SD Memory Card, extension other than
listed below cannot be recognized.
- JPEG : ".jpg"
To pause playback:
Press [F (pause)].
To return to the normal playback:
Press [B (play)].
To stop playback:
Press [C (stop)].
Playback will be in Resume-On-Stop mode.
Resume-On-Stop mode
If a playback is in Resume-On-Stop mode, when
you press [B (play)] next time, the playback will
start from the point where it has been stopped.
Note
• Resume playback may not be available for the
BD that supports Java applications (BD-Java).
• In the “Disc”mode, the resume information will
be cleared when;
16
Download from Www.Somanuals.com. All Manuals Search And Download.
- [C (stop)] is pressed while in the Resume-On-
Stop mode.
Playing Back (Audio CD / JPEG Files)
Before you begin, make sure the correct media
mode is selected. Refer to “Selecting the Media
Mode”on page 16.
- the parental level is changed.
- the disc tray is opened.
• In the “SD Card”mode, the resume information
will be cleared when;
1. Insert an audio CD or a disc/card with JPEG
files.
- [C (stop)] is pressed while in the Resume-On-
Stop mode.
2. Use [K/L] to select a desired track, folder or
file, then press [OK]. Use [s/B] to go back
and forward between the hierarchies (only
for JPEG files).
- the SD Memory Card is removed.
- the unit is turned into the standby mode.
Note
• If you press [OK] on the desired file, playback
will start.
may appear at the top-right on the TV screen
when the operation is prohibited by the disc or
this unit.
• During the playback of 2-layered disc, pictures
may stop for a moment. This happens when the
1st layer switches to the 2nd layer. This is not a
malfunction.
• The operation may vary when you play back
BD-videos or DVD-videos with disc menu.
Refer to the manual accompanying the disc for
details.
•
1
2
3
4
5
6
- - / 20
File List
JPEG_DISC
Folder_1
Folder_2
Folder_3
JPEG_A
JPEG_B
JPEG_C
JPEG_D
Page Up
Page Down
• Set “Still Mode”setting to “Field”in “Video”menu
if pictures in the pause mode are blurred. Refer
to “Still Mode”on page 27.
1
2
audio CD: Track information
JPEG: File information
audio CD: “CD-DA”will be displayed.
Using the Title / Disc / Pop-up Menu
Many of BD-video and DVD-video discs contain
title menu (BD-video / DVD-video), disc menu
(DVD-video) or pop-up menu (BD-video) which
guides you through the available functions in
the disc. The contents of the menus may differ
depending on the discs.
JPEG:
Current Disc or folder name will
be displayed.
3
4
audio CD: List of the track number and
time.
JPEG:
List of the file / folder names in
the current folder / disc
Title menu (BD-video / DVD-video)
Operation Press [RED] to go to the previous
guide:
1. Press [TOP MENU].
page. Press [GREEN] to go to the
next page.
2. Use [K/L/s/B] to select an item, then press
[OK].
6
7
Current page / Total page number
Playback status
3. Press [TOP MENU] to exit.
Disc menu (DVD-video)
Icons:
1. Press [POP MENU / MENU].
2. Use [K/L/s/B] to select an item, then press
[OK].
Folder
3. Press [POP MENU / MENU] to exit.
Pop-up menu (BD-video)
This is a special feature available for some BD-
videos. When you press [POP MENU / MENU], a
menu pops out on the TV screen during playback.
1. During the playback of BD-video, press
[POP MENU / MENU].
audio CD tracks
JPEG files
2. Use [K/L/s/B] to select an item, then press
[OK].
3. Press [POP MENU / MENU] to exit.
Note
• Contents of menus and corresponding menu
operations may vary among discs. Refer to the
manual accompanying the disc for details.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
KODAK Picture CD
3. Press [C (stop)] to stop playback.
This unit can also run JPEG files stored on KODAK
Picture CD. You can enjoy picture images on the
TV set by playing back the KODAK Picture CD. This
unit conforms to ver.7.0 of KODAK Picture CD. For
details of KODAK Picture CD, contact a shop that
provides developing service of Kodak Inc.
It is recommended that files to be played back
in this unit are recorded under the following
specifications:
<JPEG>
• Upper limit :
2,560 x 1,900 dots (sub
sampling is 4:4:4)
1. When KODAK Picture CD is inserted in this
unit, KODAK Picture CD menu will appear
automatically on the TV screen.
5,120 x 3,840 dots (sub
sampling is up to 4:2:2)
• Lower limit :
• File size of image
maximum :
32 x 32 dots
12 MB
1
4
- - / 16
Thumbnail
Pictures
Note
• Unrecognizable characters will be replaced with
asterisks.
• Some unplayable folders or files may be listed
due to the recording status.
• High-resolution JPEG files take longer to be
displayed.
Page Prev
Page Next
• Progressive JPEG files (JPEG files saved in
progressive format) cannot be played back in
this unit.
• The system can recognize up to 255 folders /
999 files for CD, 999 folders / 9,999 files for BD,
DVD and SD Memory Card.
• The 9th and deeper hierarchies cannot
be displayed for CD. The 10th and deeper
hierarchies cannot be displayed for BD, DVD
and SD Memory Card.
• For the SD Memory Card playback, refer to
“Reading the SD Memory Card”on page 16.
• Extension other than listed below cannot be
recognized.
2
3
1
2
3
File information
Current page / Total page number
Operation guide: Press [BLUE] to go to the
previous page.
Press [YELLOW] to go to
the next page.
4
Playback status
2. Use [K/L/s/B] to select a desired file to be
played back, then press [B (play)] or [OK].
• An image will be played back from the
selected file and go to the next one in turn.
3. Press [C (stop)] to stop playback.
To return to the first item:
- JPEG : “.jpg”/”.jpeg”
Press [TOP MENU].
•
With regard to the multi-border BD-RE/-R,
additionally recorded sections cannot be
recognized.
To return to the file played last:
Press [POP MENU / MENU].
• With regard to the multi-border DVD-RW/-R,
additionally recorded sections may not be
recognized.
Tips for JPEG / KODAK Picture CD Playback
• The selected file will be played back and go
to the next file in the current hierarchy in turn
every 10 seconds.
• Every press on [ANGLE] will turn the image
clockwise by 90 degrees when an image is
displayed.
• To change the visual effect for switching the
playback image, press [MODE] once, then use
[s/B] or [OK] to switch between “Cut In/Out”
and “Fade In/Out”.
• During JPEG / KODAK Picture CD playback,
press [MODE] twice to change the size of the
playback image, then use [s/B] or [OK] to
switch between “Normal”(100 %) and “Small”
(95 %). The size change may have no effect on
some files (e.g. files with a small picture size).
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Fast Forward / Fast Reverse
Repeat Playback
1. During playback, press [D (forward)]
repeatedly for fast forward.
During playback, press [E (reverse)]
repeatedly for fast reverse.
Every time you press [D (forward)] or
[E (reverse)], the playback speed will
change.
Available repeat functions vary depending the
discs.
1. During playback, press [REPEAT] repeatedly
to select the desired repeat mode.
Repeat mode
Chapter repeat
Available media
BD-video
DVD-video
The current chapter will be
2. Press [B (play)] to return to normal
playback.
played back repeatedly.
Title repeat
BD-video
DVD-video
The current title will be
Note
played back repeatedly.
• For BD and DVD, speed changes in 5 different
levels.
Track repeat
audio CD
JPEG file
The current track will be
• For audio CD, speed changes in 3 different
levels.
• For audio CD, fast forward / fast reverse search
between different tracks are not available
during program and random playback.
played back repeatedly.
Group repeat
The current folder will be
played back repeatedly.
All repeat
Slow Forward Playback
audio CD
JPEG file
All tracks or files in the
media will be played back
repeatedly.
1. During playback, press [F (pause)], then
press [D (forward)].
Every time you press [D (forward)],
playback speed will change.
2. Press [B (play)] to return to normal
playback.
Note
• The repeat setting will be canceled when you
stop playback.
• The chapter, title, track or group repeat will be
cleared when moving to another chapter, title,
track / file or folder.
• Chapter and title repeat are not available with
some scenes.
Note
• For BD and DVD, speed changes in 3 different
levels.
• Only slow forward is available.
• Set “Still Mode”setting to “Field”in “Video”menu
if pictures in the slow forward playback mode
are blurred. Refer to “Still Mode”on page 27.
Program Playback
You can play back the disc/card in your desired
order.
Step by Step Playback
1. In stop mode, press [MODE].
2. Use [K/L] to select a track / folder / file, then
press [OK].
1. In pause mode, press [F (pause)] repeatedly.
Every time you press [F (pause)], playback
will advance one step at a time.
2. Press [B (play)] to return to normal
playback.
1
2
3
4
5
6
- - / 16
Program
CD_DA
Total
0 : 26 : 24
Note
8
9
0:36
2
4
9
1:14
• Only step by step forward is available.
• Set “Still Mode”setting to “Field”in “Video”menu
if pictures in step by step playback mode are
blurred. Refer to “Still Mode”on page 27.
1:14
0:45
0:50
0:53
0:20
0:54
0:50
1:14
0:50
0:53
0:54
0:36
10
11
12
13
14
11
12
14
8
2
/
3
2
/
3
7
8
Page Up
Page Down
Page Prev
Page Next
e.g.) audio CD
1
audio CD:
JPEG:
Track information
File information
19
Download from Www.Somanuals.com. All Manuals Search And Download.
• Playback from a desired track / file and random
playback are not available during program
playback.
• Press [MODE] to switch to the random playback
mode.
2
3
audio CD:
JPEG:
“CD-DA”will be displayed.
Current Disc, SD Memory
Card, or folder name will be
displayed.
Track /
Track / Folder / File list in the
Folder / File original order
list:
• The program will be cleared when;
- the unit is turned into the standby mode.
- the media mode is switched to the other
mode.
4
5
Programmed Track / File list in the
list :
Cumulative playback time of all tracks in the
programmed list (audio CD only)
Playback status
Current page / Total page number
Operation
guide:
programmed order
- the disc / card is removed. (as for “Disc”
mode, just opening the disc tray will clear the
program info.)
6
7
8
Random Playback
Press [RED] to go to the
previous page in the track /
file list.
This function shuffles the playback order of tracks
/ files.
1. In stop mode, press [MODE] twice.
Press [GREEN] to go to the next
page in the track / file list.
Press [BLUE] to go to the
previous page in the
programmed list.
1
2
3
4
5
6
- - / 16
Random
CD_DA
Total
1 : 13 : 29
Press [YELLOW] to go to the
next page in the programmed
list.
1
2
3
4
5
6
7
0:36
1:14
0:45
0:50
0:53
0:20
0:54
• For JPEG files, use [K/L] to select a folder, then
press [OK] first, and then use [K/L] to select a
file, then press [OK].
1
/
3
Page Down
• Press [CLEAR] to erase the last file of the
program.
• Use [K/L] to select “All Clear”at the bottom
of the list to erase all the tracks / files in the
program.
• The programmed tracks / files is displayed in
the right hand screen.
• Use [s/B] to go back / forward between the
hierarchy of folders.
1
2
audio CD:
JPEG:
audio CD:
JPEG:
Track information
File information
“CD-DA”will be displayed.
Current Disc, SD Memory
Card, or folder name will be
displayed.
3
4
Track / File Track / File list in the original
list:
Operation
guide:
order will be displayed.
Press [RED] to go to the
previous page in the track /
file list.
3. Press [B (play)] to start program playback.
• The program playback will start.
To exit from the program playback mode:
• Press [RETURN] in stop mode.
Press [GREEN] to go to the next
page in the track / file list.
Note
5
6
Total playback time of all tracks (audio CD
only)
Playback status
• During program playback, press [C (stop)]
once to set the resume point, and then press
[B (play)] to resume program playback from
where [C (stop)] was pressed (audio CD) or
from beginning of the file where [C (stop)] was
pressed (JPEG).
2. Press [B (play)] to start random playback.
To exit from the random playback mode:
• Press [MODE] in stop mode.
• During program playback, press [C (stop)] twice
to display the program screen. To go back to the
normal program playback, press [RETURN] to
exit from the program screen, then press
[B (play)].
Note
• During the random playback, press [C (stop)]
once to set the resume point, and then press
[B (play)] to resume random playback from
where [C (stop)] was pressed (audio CD) or
from beginning of the file where [C (stop)] was
pressed (JPEG).
• Up to 99 tracks / files can be entered.
• To repeat the current track / file in the program,
press [REPEAT] repeatedly until “
Track”
appears during playback. To repeat the entire
program, press [REPEAT] repeatedly until
“
All”appears during playback.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
• To repeat the current track / file in the random
selection, press [REPEAT] repeatedly until
Track”appears during playback. To repeat
the entire random selection press [REPEAT]
ꢀ Noise reduction (DVD-video only)
Reduces the noise of the playback picture.
“
“Off” :Shows the original picture as recorded.
“1” :Executes 3D noise reduction which detects
and deletes the noise by comparing each
picture frames.
“2” :Executes MPEG noise reduction which
reduces the block noise and mosquito
noise on the subtitle on movie.
“3” :Executes both MPEG noise reduction and
3D noise reduction.
repeatedly until “
playback.
All”appears during
• Playback from a desired track / file is not
available during random playback.
• In stop mode, press [RETURN] to switch to the
program playback mode.
Rapid Playback
This function plays back approximately at 1.3
times the normal playback while keeping the
sound output. This function is available only on
discs recorded in the Dolby Digital format.
1. During playback, press [MODE] repeatedly
until the Rapid playback setting appears.
3. Press [RETURN] to exit.
Note
• The setting will remain the same even if the unit
is turned to the standby mode.
• “Black Level”is not effective under the following
conditions.
Off
- When the picture is output from HDMI OUT
jack.
• You cannot adjust the setting during rapid
playback.
2. Press [OK] or [s/B] to switch (1.3x), or “Off”.
“Off” : Plays back in normal speed.
“
”: Plays back approximately at 1.3 times of
normal playback.
3. Press [B (play)] to return to normal
Virtual Surround
You can enjoy stereophonic virtual space through
your existing 2 channel stereo system.
playback.
Note
• Picture adjustment and audio language setting
cannot be changed during this function.
• Virtual surround does not work during this
function.
• This function may not work at some points on
a disc.
1. During playback, press [MODE].
2. Use [K/L] to select your desired setting.
Off
“Off” :No surround effect
“1” :Natural surround effect
“2” :Stronger surround effect
3. Press [RETURN] to exit.
• During this function, 2ch LPCM will be output
from HDMI OUT jack and DIGITAL OUT jack.
Adjusting the Picture
Note
You can adjust the picture quality.
• Set the virtual surround setting to “Off”or lower
the volume if the sound is distorted.
• Virtual surround does not function during rapid
playback.
1. During playback, press [MODE] repeatedly
until
appears.
2. Use [K/L] to select your desired item, then
use [s/B] to adjust the setting.
• For the virtual surround, audio signal will always
be 2-channel LPCM.
Black Level
Noise Reduction
On
Off
e.g.) DVD-video
ꢀ Black level
You can adjust the black level setting to make the
black parts of the pictures as bright as you prefer.
You can select “On”or “Off”.
“On” :Makes the dark parts brighter.
“Off” :Shows the original picture as recorded.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying BD-Live Discs with Internet
PIP (BONUSVIEW) Setting
You can enjoy BD-Live which enables you to use
interactive features when the unit is connected
to the Internet. (For network connection, refer to
page 36.) Examples of BD-Live features:
• Online access to additional content such as
movie trailers, subtitles, BD-Java applications,
etc.
Some BD-videos have the PIP function which
enables you to display the secondary video in
the primary video. You can call up the secondary
video by pressing [MODE] whenever the scene
contains the secondary video.
• While downloading, special video data may be
played back.
primary video
ꢀ How to Activate the BD-Live Function
1. Insert the disc with BD-Live function.
2. Insert an SD card with enough capacity. (SD
card of 1GB or more is recommended.)
• Make sure to use the SD card with the
supported file system. (Refer to “Reading the
SD Memory Card”on page 16.)
secondary video
1. During playback, press [MODE] repeatedly
until the PIP function appears.
2. Use [K/L] to select the secondary video you
want.
3. Press [TOP MENU] to access the disc menu.
4. Select “BD-Live”, then press [B (play)] or
[OK].
• The secondary video will be displayed and
the secondary audio will be output.
• Use [s/B] to switch between current setting
and “Off”.
• Make sure the SD card is correctly inserted,
and do not remove the card during playback.
• Service and functions differ depending on
the disc. Follow the instructions given by the
disc when using the BD-Live function.
Note
3. Press [RETURN] or [MODE] to remove the PIP
information.
• You must connect the unit to the Internet and
set up necessary settings in order to use BD-
Live.
• For certain discs, “BD-Live Setting”may need to
be changed.
• Depending on your connection environment, it
may take time to connect to the Internet or the
Internet may not be connected.
Note
• The secondary audio will not be output when
the secondary audio is set to “Off”or when “BD
Audio Mode”is set to “HD Audio Output”. Refer
to“Switching Audio Soundtrack”on page 24 and
“Setting the BD Audio Mode”on page 24.
Camera Angle
• When BD-Live functions are used and the unit is
connected to the Internet, you may be charged
for this communication.
• While connecting to BD-Live, sometimes it can
take awhile before the next page is downloaded
or refreshed.
Some BD-videos and DVD-videos contain scenes
which have been shot simultaneously from
various angles. You can change the camera angle
when
appears on the TV screen.
1. During playback, press [ANGLE].
• The selected angle will be displayed on the
display bar at the top of the TV screen.
2. Use [K/L] to select your desired angle.
• Some discs with BD-Live function require
memory when playing back the content. If you
cannot play back a disc with BD-Live function,
insert an SD card(1GB or more) which is
formatted on this unit.
1 / 3
Note
Note for AACS Online
• If “Angle Icon”setting is “Off”in “Others”menu,
will not appear. Refer to page 33.
• The player or disc IDs may be sent to the
content provider when playing back a disc with
BD-Live function.
• If you save your viewing history on the server by
using these IDs, you will be introduced to other
similar movies.
• You can save game score histories.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Search
Using [the Number buttons] (Direct Search)
ꢀ Using [H/G (skip)]
ꢀ Title search
1. During playback, press [G (skip)] to move
to the next track / title / chapter / file. Press
it repeatedly to skip to subsequent tracks.
Press [H (skip)] once to go back to the
beginning of the current track. Press it
repeatedly to go to the previous tracks.
• For JPEG files, press [H (skip)] to go back to
the previous file.
In stop mode, enter the title number you want
to search using [the Number buttons].
Playback of the title will start in a few seconds.
ꢀ Chapter search
During playback of a title, enter the chapter
number you want to search using
[the Number buttons].
Playback of the chapter will start in a few
seconds.
Note
ꢀ Track / file search
• For BD and DVD, if title contains no chapters,
[H/G (skip)] changes the title.
• For JPEG files, [s/B] is also available.
Enter the track / file number you want to search
using [the Number buttons].
Playback of the track / file will start in a few
seconds.
ꢀ Using [SEARCH]
By using [SEARCH], you can select the following
search modes.
Note
Search mode
Available media
• As for the BD-video, how it performs will be
strongly determined by the disc, and may not
perform as described here.
BD-video
/
DVD-video
Chapter / Title search
Switching Subtitles
audio CD
JPEG file
Some video materials may have subtitles in 1 or
more languages. For commercially available discs,
the supported languages can be found on the disc
case. Follow the steps below to switch the subtitle
languages during playback.
Track search
Time search
BD-video
DVD-video
audio CD
1. During playback, press [SEARCH] repeatedly
until your desired search mode appears.
2. Enter the desired chapter, title, track, file
number or time to search for using
[the Number buttons].
1. During playback, press [SUBTITLE].
2. Use [K/L] to select “Primary Subtitle”,
“Secondary Subtitle” or “Subtitle Style”, then
press [OK].
Primary Subtitle
Secondary Subtitle
Subtitle Style
2
2
2/25
ENG
ENG
/11
/11
• Chapter, title, track or time search will start.
• Press [CLEAR] to erase an incorrect input.
Note
“Primary Subtitle” :
Sets the subtitle for
the primary video.
• During program and random playback, search
functions are not available except the search
using [H/G (skip)].
• Time search is available only in the same track,
file or title.
• For BD, chapter and time search are available
only during playback.
“Secondary Subtitle” : Sets the subtitle for
the secondary video.
Sets style of the
subtitle.
“Subtitle Style” :
3. Use [K/L] to select your desired subtitle or
style.
• Use [s/B] to switch between current subtitle
setting and “Off”.
4. Press [SUBTITLE] to exit.
1. During playback, press [SUBTITLE].
2. Use [K/L] to select your desired subtitle.
• Use [s/B] to switch between current subtitle
setting and “Off”.
1
ENG
/ 4
3. Press [SUBTITLE] to exit.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Note
• The secondary audio will not be output when
the secondary video is not displayed or when
“BD Audio Mode”is set to “HD Audio Output”.
(For some BDs, secondary audio will be output
even when secondary video is off.)
• Some discs will only allow you to change the
subtitles from the disc menu or pop-up menu.
Press [TOP MENU] or [POP MENU / MENU] to
display the disc menu or pop-up menu.
• If 4-digit-language code appears in the subtitle
menu, refer to “Language Code List”on page 45.
• If the disc has no subtitle language or subtitle
style, “Not Available”will be displayed on the TV
screen.
• The sound mode cannot be changed during
playback of discs not recorded in multiple
audio.
• Some discs allow changing the audio language
setting on the disc menu. (Operation varies
depending on the discs. Refer to the manual
accompanying the disc.)
• [AUDIO] may not work on some discs with
multiple audio streams or channels (e.g. DVDs
that allow changing audio setting on the disc
menu).
• If you select a language that has a 3-letter-
language code, the code will be displayed every
time you change the audio language setting.
If you select any other languages, “---”will be
displayed instead. (Refer to page 45.)
• Audio Language selection cannot be made
during rapid playback. (Refer to page 21.)
• If 4-digit-language code appears in the audio
menu, refer to page 45.
• During playback of the secondary video, the
primary subtitle setting is not available except
when there is no subtitle for the secondary
video.
• If you select a language that has a 3-letter-
language code, the code will be displayed every
time you change the subtitle language setting.
If you select any other languages, “---”will be
displayed instead. (Refer to page 45.)
Switching Audio Soundtrack
When playing back video material recorded with
2 or more soundtracks (these are often in different
audio languages or audio formats), you can switch
them during playback.
• If the disc has no audio language, “Not
Available”will be displayed on the TV screen.
• For DTS-CD (5.1 music disc), selecting audio
streams or channels is not available.
1. During playback, press [AUDIO].
2. Use [K/L] to select “Primary” or “Secondary”
audio to set, then press [OK].
Primary
1
ENG
Secondary
ENG
Dolby D
Multi-ch
Multi-ch
/3
/3
Setting the BD Audio Mode
2
Dolby D+
There are 2 options for the “BD Audio Mode”
setting; either by setting the output to the
secondary and interactive audio accompanied by
the primary audio or by setting only the primary
audio. Depending on the setting of the mode,
Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
DTS, or DTS-HD output changes between multi
LPCM and Bitstream.
“Primary” :
Sets the audio for the primary
video.
“Secondary” : Sets the audio for the
secondary video.
3. Use [K/L] to select your desired audio
stream channel.
• For “Secondary”, use [s/B] to switch
between current audio setting and “Off”.
4. Press [AUDIO] to exit.
1. In stop mode with BD inserted, press
[MODE].
2. Use [K/L] to select your desired setting.
BD Audio Mode
Mix Audio Output
1. During playback, press [AUDIO].
2. Use [K/L] to select your desired audio
stream channel.
“Mix Audio Output”:
If it is available, BD-video’s secondary and
interactive audio will be output with the
primary audio.
1
ENG Dolby D
3/2.1ch
48k
/ 3
• The secondary audio is the audio for the
secondary video (Director’s comment etc.)
and the interactive audio is the audio for the
interactive application (Button click sounds
etc.).
• For audio CD, you can select following
options.
“Stereo” : Both right and left channels are
active (stereo).
“L-ch” :
“R-ch” :
Only left channel is active.
Only right channel is active.
“HD Audio Output”:
Only the primary audio will be output. Set this
mode in order to output , Dolby Digital Plus,
Dolby TrueHD, or DTS-HD audio of BD through
HDMI connection.
3. Press [AUDIO] to exit.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press [RETURN] to exit.
• For questions regarding VUDU service, please
contact VUDU Customer Care at
1-888-554-VUDU (8838) or visit
• You can also set “BD Audio Mode”from the
setup menu. Refer to page 28.
Note
Guide to VUDU Menu Screen
• In “Mix Audio Output”mode, if there is no
secondary and interactive audio, the audio will
be output as “HD Audio Output”mode.
ꢀ App Home Screen
App Home screen is the entry point to VUDU
applications including VUDU movies. To call up
the screen, press [RED] while opening screen is
displayed.
NETWORK OPERATIONS
VUDU Operations
2
With this unit, you can enjoy VUDU HD on-
demand movies / TV episodes and Internet
applications.
- For complete instructions on using VUDU
an updated in-depth online manual.
1
3
Before Activating VUDU
Follow the following procedure before activating
VUDU.
1. Viewing mode : List of different viewing
modes for App Home
1. Connect this unit to the Internet.
• Refer to “Connection to the Network”on page
12.
applications
2. Promotional
graphics :
Placeholder where
promotional graphics are
displayed
• Broadband Internet connection of 8 Mbps or
faster is recommended.
2. Set up the necessary network connection
settings.
3. Application list : Grid of applications in the
• Refer to “Network Connection”on page 36.
selected viewing mode
Activating VUDU
ꢀ VUDU Movies Home Screen
After you set up the network connection, you
must set up a VUDU account and activate this unit
before watching VUDU movies.
1. Press [RED] while opening screen is
displayed.
When you select “VUDU movies”in App Home
screen, VUDU movies home screen will appear.
1
2
4
3
• For opening screen, refer to page 9.
• VUDU App Home screen will appear.
• For the first time only, “Network Service
Disclaimer”screen will appear. After
confirming the content, use [s/B] to select
“Agree”, then press [OK].
1. Most Watched : To access the list of popular
movies / TV episodes on
VUDU
2. Use [K/L/s/B] to select “VUDU movies”,
then press [OK].
2. New on Vudu : To access the list of newly
available movies /TV
• VUDU welcome screen will appear.
3. Select “SIGN Up Now”, then press [OK].
4. Enter the e-mail address you would like
associated with your VUDU account. After
you enter your e-mail address correctly,
select “Done” and press [OK].
episodes
3. Explore Catalog : To access the list of options
to search movies / TV
episodes
To access the list of rented or
purchased contents
4. My Vudu :
• Activation e-mail will be sent to the e-mail
address. (You must have access to the e-mail
address to activate VUDU.)
Note
5. Follow directions in the activation e-mail to
complete your account activation.
Note
• You can go back to VUDU movies home screen
by pressing [BLUE] while you are using VUDU
movies features.
• You can deactivate the connection to VUDU
by setting “Vudu Deactivate”to “Yes”. (Refer to
page 42.)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Renting or Purchasing VUDU Movies / TV
Episodes
Button
[F(pause)]
Action
Pause the playback
After activating this unit, you are ready to
purchase or rent movies / TV episodes and watch
directly on your TV.
[C(stop)]
Stop the playback
1. Press [RED] while opening screen is
displayed.
[E(reverse)] /
[D(forward)]
Fast reverse or forward
the playback
• For opening screen, refer to page 9.
2. Use [K/L/s/B] to select “VUDU movies”,
then press [OK].
[B(play)]
Resume the playback
• VUDU movies home screen will appear.
3. Use [K/L/s/B] to select “Most Watched” ,
“New on Vudu” or “Explore Catalog”, then
press [OK].
[YELLOW]
Display the info banner
which shows the
playback information
4. Use [K/L/s/B] to select the desired movie
or TV episode, then press [OK].
• “MOVIE DETAILS”screen will appear.
5. Use [K/L] to select “Rent” or “Own”, then
press [OK].
[TOP MENU]
Go back to opening
screen
Note
6. Use [K/L] to select a desired quality option,
then press [OK].
• Available buttons and actions may subject to
change without notice.
• Select the quality option that best suits your
network environment.
Using Internet Applications
Video Resolution
480p
HD 720
Minimum Bit Rate
1 Mbps
2.25 Mbps
4.5 Mbps
In addition to VUDU movies, you can use various
kinds of Internet applications.
SD
1. In App Home screen, use [K/L/s/B] to
select a desired application and press [OK].
2. Follow the instructions on screen of the
selected application.
HDX 1080p
7. Use [K/L] to select “Rent for $*.**” or “Buy
for $*.**”, then press [OK] to confirm your
rental or purchase.
Note
8. Select “Watch Now” to start playing the
movie / TV episode.
• Available applications may change without
notice.
• If you want to return to the “MOVIE DETAILS”,
select “Watch Later”.
FUNCTION SETUP
In the setup menu you can change the setting for
audio, video, language, etc. You cannot change
the setting during playback.
Note
• Available quality options differ depending on
the content.
Setting items displayed in gray indicates they are
not available under the conditions at the time.
Watching Rented or Purchased VUDU Movies /
TV Episodes
Quick
1. Follow steps 1 to 2 in “Renting or Purchasing
VUDU Movies / TV Episodes” on page 26.
2. Use [s/B] to select “My Vudu”, then press
[OK].
“
Quick”menu contains setting items extracted
from “ Custom”menu which may be used
frequently.
1. In stop mode, press [SETUP].
2. Use [K/L] to select , then press [OK].
3. Use [K/L] to select your desired setting
items.
3. Use [s/B] to select “My Rentals”, “My
Movies” or “My TV Shows”, then press [OK].
4. Use [K/L] to select a desired movie / TV
episode, then press [OK].
5. Select “Watch ***” to start watching the
movie / TV episode.
Quick
Mode Select
Disc
• During playback, use following buttons to
control the playback.
HDMI Audio Out
HDMI Multi(Normal)
HDMI Video Resolution Auto
Player Menu
Network Selection
English
Wired
4. Follow the procedure below depending on
the setting items.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
A) If “B”does not appear on the right side of
the setting items when you select the items:
Press [OK] repeatedly to change options.
B) If “B”appears on the right side of the setting
items when you select the items:
1) Press [OK].
Setting items
Audio
Subtitle
Descriptions
Sets the language for audio.
Sets the language for subtitle.
Sets the language for disc
menu or pop-up menu.
Disc Menu
2) Use [K/L] to select options, then press
[OK].
Sets the language for on-screen
display.
Player Menu *1
• Use [s] or [RETURN] to go back to the
previous screen.
5. Press [SETUP] to exit.
*1) “Auto”for “Player Menu”activates the Get & Set
Menu Language function. Refer to page 35.
- “Auto”is available only when “fun-Link (HDMI
CEC)”is set to “On”.
Custom
“
Custom”menu contains all the setting items.
- inside the parentheses next to “Auto”will be
the language which is currently selected by
your TV.
1. In stop mode, press [SETUP].
2. Use [K/L] to select , then press [OK].
3. Use [K/L] to select your desired setting
category, then press [OK].
: Language
• For “Audio”, “Subtitle”, and “Disc Menu”, if you
select “Other”, enter the 4-digit-number code for
the desired language. (Refer to “Language Code
List”on page 45.) Only the languages supported
by the disc can be selected.
: Video
: Audio
: Parental
: Others
Video
• For “Parental”menu, follow the procedure on
page 32.
Video
4. Use [K/L] to select your desired setting
items.
TV Aspect
16:9 Wide
HDMI Video Resolution Auto
5. Follow the procedure below depending on
the setting items.
HDMI Deep Color
Progressive Mode
Still Mode
Auto
Auto
Auto
A) If “B”does not appear on the right side of
the setting items when you select the items:
Press [OK] repeatedly to change options.
B) If “B”appears on the right side of the setting
items when you select the items:
1) Press [OK].
• To select the setting items and options, refer to
Custom”on page 27.
2) Use [K/L] to select options, then press
[OK].
“
• “ Quick”menu consists of the setting menus
frequently used, and they are accompanied
• Use [s] or [RETURN] to go back to the
previous screen.
with
Setting items
TV Aspect
.
6. Press [SETUP] to exit.
Descriptions
Language
Sets the picture size
according to aspect
ratio of the connected
TV.
Language
Audio
Subtitle
Original
Off
HDMI Video Resolution Sets the HDMI video
resolution.
Disc Menu
Player Menu
English
English
HDMI Deep Color
Progressive Mode
Sets whether to output
the picture from HDMI
OUT jack with Deep
Color or not.
Sets the optimum
progressive mode for
the image material
output from HDMI OUT
jack.
• To select the setting items and options, refer to
Custom”on page 27.
“
• “ Quick”menu consists of the setting menus
frequently used, and they are accompanied
Still Mode *1
Adjusts picture
resolution and quality in
still mode.
with
.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
*1) An individual picture on the TV screen is called
“Frame”, which consists of two separate images
called “Field”. Some pictures may be blurred at
the auto setting in “Still Mode”setting due to
their data characteristics.
Audio
Audio
BD Audio Mode
HDMI Audio Out
Down Sampling
DRC
Mix Audio Output
HDMI Multi (Normal)
On
Auto
Note for “HDMI Video Resolution”
• Even if you set “HDMI Video Resolution”setting
to “Auto”, when this unit is connected to a DVI
compatible display devices with an HDMI-DVI
cable, 480p signal will be output.
• Video and audio signals may be distorted
temporarily when switching to / from the HDMI
output mode.
• You cannot change the video resolution
during playback of Blu-ray Discs. To change the
resolution, stop playback.
• To select the setting items and options, refer to
Custom”on page 27.
“
• “ Quick”menu consists of the setting menus
frequently used, and they are accompanied
with
.
• In order to get natural and high quality film
reproduction of 24-frame film material, use
an HDMI cable (High Speed HDMI cable
is recommended) and select “Auto”if the
connected TV is compatible with 1080p24
frame input.
• Even if the connected TV is compatible with
1080p24 frame input and you set “HDMI Video
Resolution”setting to “Auto”, when the contents
of the disc are not compatible for 1080p24
frame, 1080p60 frame will be output.
• If the picture is not output properly to the TV
because of “HDMI Video Resolution”, press and
hold [B PLAY] on the front panel for more than
5 seconds. Both settings will be reset to the
default automatically.
Setting items
BD Audio Mode
Descriptions
For BD, selects whether
to output the secondary
and interactive audio
with primary audio if it
is available or only the
primary audio. Refer to
“Setting the BD Audio
Mode”on page 24.
Sets the audio format
for the audio output
from HDMI OUT jack.
Refer to page 29.
HDMI Audio Out *1
Down Sampling
Sets the digital audio
output when playing
back BD or DVD
recorded in LPCM.
DRC
Sets whether to
compress the range of
sound volume (dynamic
range control) when
Dolby Digital, Dolby
Digital Plus or Dolby
TrueHD audio is played
back.
When “Auto”is
selected,this unit
detects DRC setting of
the disc and set “DRC”
setting to “On”or “Off”
automatically when the
discs recorded in Dolby
TrueHD format are in
playback.
*1) Under following circumstances, “HDMI
Multi(Normal)”and “HDMI Multi(LPCM)”are
not available.
- HDMI cable is not connected to HDMI OUT
jack.
- Connected TV is off.
- Connected TV is not compatible with audio
output.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI Audio Out Setting
When using HDMI connections make “HDMI Audio Out”setting in “Audio”menu according to the
specifications of the device to be connected. Refer to page 28. Normally, set it to “HDMI Multi(Normal)”so
that the unit automatically picks and outputs the best audio format suited to your connected device.
Device to be connected
“HDMI Audio Out”
Output HDMI audio signal
setting
Device compatible with Dolby
Digital, Dolby Digital Plus, Dolby
TrueHD, DTS or DTS-HD decoding
HDMI Multi(Normal)
Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS, or DTS-HD bitstream are
output from HDMI OUT jack. Make the
speaker settings on the connected AV
amplifier, etc.
Device compatible with 3 or more HDMI Multi(LPCM)
channels of audio inputs (not
Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, DTS or DTS-HD
compatible)
Multi-channel audio signals are output
from HDMI OUT jack. Make the speaker
settings with the speaker setting
items appear after you select “HDMI
Multi(LPCM)”.
HDMI audio will be mute, and Dolby
Digital / DTS bitstream or LPCM will be
output from DIGITAL OUT jack depending
on “Digital Out”setting.
HDMI connection to a TV and
digital audio connection (coaxial)
to an AV amplifier
Audio Mute
Note
• The audio signals from HDMI OUT jack (including the sampling frequency, the number of channels and
bit length) maybe limited by the device that is connected.
• Among the devices that support HDMI, some do not support audio output (e.g. projectors). In
connections with device such as this unit, audio signals are not output from HDMI OUT jack.
• Video and audio signals may be distorted temporarily when switching to / from the HDMI output
mode.
Digital Out Setting
When “Audio Mute”is selected in “HDMI Audio Out”setting, HDMI audio signal will be mute and the
audio signals output from DIGITAL OUT jack changes depending on “Digital Out”setting.
Quick B HDMI Audio Out B Audio Mute B Digital Out
Bitstream* :
When playing back discs recorded in Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS® or DTS-HD®,
the corresponding core stream (Dolby Digital or DTS®) are output.
LPCM :
LPCM signal will be output from DIGITAL OUT jack.
• This setting is not effective when the HDMI audio signal is output.
Note
• In order to output LPCM signal from DIGITAL OUT jack while outputting the HDMI audio signal, set
“HDMI Audio Out”setting to “HDMI Multi(LPCM)”.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker Setting (Available when you have HDMI cable connected to HDMI OUT jack)
This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel surround.
To make the most of its feature, set up your speakers appropriately by referring to the following table.
How to navigate through “HDMI Multi(LPCM)”:
1) Use [K/L] to select your desired menu item then
press [OK].
2) Use [K/L] to select your setting items.
Front speaker (left)
Front speaker (right)
Subwoofer
• Press [RETURN] to go back to the previous screen.
3) Use [s/B] to select desired options. (Except
for “Test Tone”, “Default” and setting options in
“Speaker Size” setting.)
Center speaker
For setting options in “Speaker Size” setting:
Press [OK] to select desired options.
For “Test Tone”:
Use [s/B] to select “Off”, “Manual” or “Auto”,
then press [OK].
Surround
speaker (left)
Surround
speaker (right)
• The test tone will be output. If you select
“Manual”, use [K/L] to select desired speaker,
then use [s/B] to adjust the volume. If you
select “Auto”, use [s/B] to adjust the volume of
the speaker that outputs the test tone.
• If you want to stop the test tone, press [RETURN].
Surround
back speaker
(left)
Surround
back speaker
(right)
e.g.) basic layout with 7.1-channel surround system
For “Default”:
Press [OK] to reset to the default.
4) Press [SETUP] to exit.
<Speaker setting for the audio signal output from HDMI OUT jack>
Quick B HDMI Audio Out B HDMI Multi(LPCM)
Custom B Audio B HDMI Audio Out B HDMI Multi(LPCM)
Menu
Setting items
Descriptions
Speaker Size
Front
Center
Subwoofer
Surround
Large:
Selects the desired speaker to
set. Then change the setting by
referring to the descriptions.
For the large speakers with strong
low frequency reproduction
capabilities.
Small:
Surround Back
For the small speakers which do
not provide strong bass sound.
You cannot change the setting of
“Subwoofer”. Speakers which are
not supported by the connected
device will be displayed in gray.
Default
Select “Default”, then press [OK]
to reset
“Speaker Size”setting to the
default.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
Channel Level
Setting items
Test Tone:
Descriptions
Select “Off”to deactivate “Test
Tests or sets the volume for each “Test Tone”is the test tone which Tone”. Select “Manual”, then press
speaker.
can be output from the speakers [OK] to manually set the volume for
so you can adjust the volume for the desired speaker.
each speaker.
Select “Auto”, then press [OK] to
automatically output the test tone
from each speaker.
Front Lch
Center
Subwoofer
Front Rch
Surround Rch
Surround Back Rch
Surround Back Lch
Surround Lch
Default
If you have selected “Manual”in
“Test Tone”, select the desired
speaker to set and adjust the
volume for the selected speaker. If
you select “Auto”in “Test Tone”, test
tone will automatically be output
in order. Adjust the volume of the
speaker that outputs the test tone.
Select “Default”, then press [OK] to
reset “Channel Level”setting to the
default.
Delay Time
Distance
Set the desired measure system.
This measure system will be used
for “Delay Time”setting.
This is a parameter for optimizing
the timing at which the sound
outputs from the speakers
according to the distance from
the listening position.
Press [OK] to switch the settings.
Front
Center
Surround
Surround Back
Default
Select the distance from the
listening position to the speaker to
get the ideal delay time.
Select “Default”, then press [OK] to
reset “Delay Time”setting to the
default.
• For “Speaker Size”setting, the settings of each speaker size may be adjusted automatically
corresponding to each setting. (e.g. If “Front”is set to “Small”, you cannot set “Center”, “Surround”, and
“Surround Back”to “Large”.)
• For “Delay Time”, the difference between the value of the “Front”, “Surround”and “Surround Back”
setting cannot exceed 15 ft (4.5m), and the difference between the value of the “Front”and “Center”
setting cannot exceed 5 ft (1.5m).
• For “Delay Time”, the value of the “Center”, “Surround”and “Surround Back”setting cannot exceed the
value of the “Front”setting.
• For “Delay Time”, the setting of “Center”, “Surround”and “Surround Back”will be changed automatically
to the setting value of the “Front”. (e.g. If the “Front”is set to 60ft (18m), the setting of “Center”,
“Surround”and “Surround Back”will be changed to 60ft (18m) as well.)
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental
Ratings control allows you to set a limit, which prevents your children from viewing inappropriate
materials. Playback will be stopped if the ratings exceed the levels you set, and it will require you to enter
a password before playing back the disc.
Parental
BD Rating Level
DVD Rating Level
Password Change
All
All
1. Use [K/L] to select , then press [OK].
2. Use [the Number buttons] to enter your 4-digit password.
For the first time use: Use [the Number buttons] to enter any 4-digit number (except for 4737), then
press [OK]. That number will be used as the password from the second time. Record your password in
case you forget it.
• If you forget the password, enter [4], [7], [3], [7]. The password will be cleared and rating level will be
set to “All”.
• While you input the password, press [CLEAR] to clear the number, then re-enter the password.
3. Proceed to A – C
A) BD Rating Level
1) Use [K/L] to select “BD Rating Level”, then press [OK].
2) Use [K/L] to select your desired option, then press [OK].
“All”:
To release the limitation.
To set the age limitation.
“Age Setting”:
• After selecting “Age Setting”, use [the Number buttons] to enter the age from 0 – 254.
(e.g. for age 15, press [0], [1], [5])
3) Press [SETUP] to exit.
B) DVD Rating Level
1) Use [K/L] to select “DVD Rating Level”, then press [OK].
2) Use [K/L] to select your desired level, then press [OK].
3) Press [SETUP] to exit.
RATING EXPLANATIONS
All:
Parental Control is inactive; all discs can played back.
DVD software of any grades (adult / general / children) can be played back.
No one under 18 admitted.
8 [Adult] :
7 [NC-17] :
6 [R] :
5 [PGR] :
4 [PG-13] :
3 [PG] :
2 [G] :
Restricted; under 18 requires accompanying parent or adult guardian.
Parental guidance recommended.
Unsuitable for children under 13.
Parental guidance suggested.
General audience.
1 [Kid Safe] : Suitable for children.
C) Password Change
1) Use [K/L] to select “Password Change”, then press [OK].
2) Enter a new 4-digit password, then press [OK].
3) Press [SETUP] to exit.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Others
Angle Icon
On
fun-Link (HDMI CEC)
Mode Select
Off
Disc
Network Connection
Software Update
• To select the setting items and options, refer to “ Custom”on page 27.
• “ Quick”menu consists of the setting menus frequently used, and they are accompanied with
• Settings with (*) are the default.
.
Setting items
Options/Descriptions
Angle Icon
On*:
The angle icon appears on the TV screen when playing back the scene with various angle.
Off:
The angle icon disappears on the TV screen.
fun-Link (HDMI
CEC)
On
Off*
Sets whether to
utilize the fun-
Link (HDMI CEC)
function. Refer to
page 35.
Disc*:
Mode Select
Select this when you play back a disc.
SD Card:
Select this when you play back an SD Memory Card.
Network:
Selects the media
to playback.
Select this when you use VUDU feature.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting items
Network
Connection
• Refer to page
36 for more
information.
Options/Descriptions
Connection
Test
Perform a network connection
test. After you change IP address
or DNS setting, always perform
this test.
If you select “Easy”, connection
test will automatically start.
Set the IP address. In most cases,
you can connect to the Internet
without making any changes to
the default setting.
Network
Selection
Wired*
Easy*
Custom
IP Address Auto(DHCP)*
Setting
Manual
IP Address
Subnet Mask
Default
Gateway
DNS Setting Auto(DHCP)*
Manual
Set the DNS setting. In most
cases, you can connect to the
Internet without making any
changes to the default setting.
Primary
DNS
Secondary
DNS
Proxy
Setting
Do Not Use*
Use
Set the proxy server. In most
cases, you can connect to the
Internet without using proxy
server.
Proxy Address
Proxy Port
Connection Auto*
Set the connection speed. In
most cases, you can connect to
the Internet without making any
changes to the default setting.
Speed
10BASE Half
10BASE Full
100BASE Half
100BASE Full
Allow*
BD-Live
Setting
You can restrict Internet access
when BD-Live functions are used.
Limited Allow
Prohibit
MAC Address
Wireless Find wireless WEP/WPA Authentication
You can check the MAC address.
Set up the connection to the
wireless router and enter the
WEP/WPA key required for
Wireless
Router
network
Manually
enter your
SSID
wireless network connection.
Wireless Router Status
You can check the current status
of the wireless router setting.
If you select “Easy”, connection
test will automatically start.
Set the IP address. In most cases,
you can connect to the Internet
without making any changes to
the default setting.
Set the DNS setting. In most
cases, you can connect to the
Internet without making any
changes to the default setting.
Set the proxy server. In most
cases, you can connect to the
Internet without using proxy
server.
Advanced Easy*
Settings
Custom
IP Address Setting
DNS Setting
Proxy Setting
BD-Live Setting
MAC Address
You can restrict Internet access
when BD-Live functions are used.
You can check the MAC address.
Deactivate the network
Disable
No*
Yes
connection.
Disclaimer
Displays the network service
disclaimer.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting items
Options/Descriptions
Software Update Current Version
Allows you to
update this unit’s
firmware. Refer to
page 41.
Indicates the current firmware version.
Disc Update No*
Allows you
to update
this unit’s
software
using a
Yes
disc.
Network
Update
You can
No*
Yes
update the
software
version by
connecting
this unit to
the Internet.
fun-Link (HDMI CEC)
fun-Link (HDMI CEC) allows integrated system control over HDMI and is part of the HDMI standard. This
function may not work properly depending on a device to be connected. When “fun-Link (HDMI CEC)”
setting is set to “On”, functions listed below will be available.
One Touch Play
When this unit is turned on, the TV also is turned on and the appropriate external input channel will
be selected automatically. The appropriate external input channel can also be selected on your TV
automatically when you press [B (play)], [H (skip)], [G (skip)], [the Number buttons], [DISPLAY],
[TOP MENU], or [POP MENU / MENU] when the unit’s power is on. (Buttons other than [B (play)] works
only with discs inserted.)
Standby
When you press and hold [STANDBY/ON y] for 2 seconds, it turns off the power of the TV first and then
turns off the power of this unit also.
When the connected fun-Link (HDMI CEC) compatible display device is turned off, this unit may also turn
off together.
System Information
Get & Set Menu Language
The unit recognizes the OSD language set for the TV and automatically sets the same language as the
player menu language (OSD menu language) for this unit.
• This feature is available only when “Auto(XXXX)”is selected in “Player Menu”in the setup menu.
(Refer to “Player Menu”on page 27.)
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Connection
• If the connection test fails, you may need to
change the MAC address settings on your
router. You can check the MAC address of this
unit on “Custom”screen. (Refer to “Custom
(Wired)“ on page 36.)
• When connecting this unit directly to a modem
for the first time or connecting it to a modem
which was previously connected to any other
network device(e.g. a router, PC, etc.), you may
have to power cycle the modem to reset the
settings on the modem.
[SETUP]B B“Others“B“Network Connection”
Set up network connection settings in order to
use BD-Live, VUDU or network update function.
Connection Test
After you enable a network connection or
change the network settings, always perform
the connection test to check if the connection is
correctly made.
1. In “Network Connection” menu, use [K/L] to
select “Connection Test”, then press [OK].
Connection test will start automatically and
the test result will appear right after the
connection test finishes.
• “Connection Test”is not available when
“Disable”is selected in “Network Connection”.
Network Selection
ꢀ Wired
• “Testing...”: The test is in progress.
• “Pass”: Connection test is successfully
completed.
Select “Wired”if you made a wired connection and
set the setting to “Easy”(wired) or “Custom”(wired),
in accordance with your network environment.
<Easy (Wired)>
Network settings are set to the following settings
initially. (In most cases, you can connect to the
Internet without making any changes to the
default settings.)
• “Fail”: Connection test failed. Check the
connection settings.
If the connection test passes, press [OK].
• Confirmation screen of the network selection
will appear.
e.g.) Wired connection
- IP Address Setting
- DNS Setting
Auto(DHCP)
Auto(DHCP)
Do Not Use
Auto
Others
Connection Test
- Proxy Setting
Network Selection
Wired
- Connection Speed
- BD-Live Setting
Allow
If you want to set the network settings back to
the default settings as above (except “BD-Live
Setting”), follow the procedure below.
then press ‘OK’
.
1. In “Network Connection” menu, use [K/L] to
select “Network Selection”, then press [OK].
2. Use [K/L] to select “Wired”, then press [OK].
3. Use [K/L] to select “Easy”, then press [OK].
• The unit will start the connection test
automatically and the test result will appear
right after the test finishes.
4. Press [OK] to activate the network
settings and set the network connection
automatically. Press [SETUP] to exit.
Note
Press [OK] again to display the confirmation
screen of network settings.
Others
Connection Test
IP Address
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
then press ‘OK’
.
• The setting of “BD-Live Setting”will not be
set back to the default, even if you follow the
procedure.
2. Press [OK] to go back to the previous screen,
or press [SETUP] to exit.
<Custom (Wired)>
Note
In following cases, select “Custom”(wired) to set
each setting as necessary.
• If the connection test passes, you are ready
to use BD-Live, VUDU or network update
function using the Internet without making any
additional settings.
- When connection test failed with the setting
of “Easy”(wired).
- When instructed by your Internet service
provider to make specific settings in
accordance with your network environment.
To set the network setting to “Custom”(wired),
follow the following procedure.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Follow steps 1 to 2 in “Easy (Wired)” on
page 36.
c) Use [K/L] to select “Primary DNS”or “Secondary
DNS”, then press [OK]. DNS setting screen will
appear. Enter primary DNS and secondary DNS
with cursor buttons and number buttons.
2.Use [K/L] to select “Custom”, then press [OK].
- Setting menu of “Custom”(wired) will be
displayed.
3. Use [K/L] to highlight the item you want to
set.
Others
DNS Setting
• ”MAC Address”is for viewing only and cannot
be selected.
Primary DNS
xxx . xxx . xxx . xxx
Secondary DNS
4. Find the instruction for the item from the
following, and set the item.
xxx . xxx . xxx . xxx
IP Address Setting / DNS Setting
1. Press [OK] repeatedly to select the desired
setting.
then press ‘OK’
• Enter the DNS addresses provided by your
Internet provider.
• If the DNS address is unknown, check
the DNS address of other devices (e.g. PC
connected via LAN cable) and assign the
same DNS address.
“Auto(DHCP)”: If your router has DHCP server
function, select “Auto(DHCP)”.
“Manual”:
If your router does not have
DHCP server function, select
“Manual”.
d) After you enter all correctly, press [OK].
• Confirmation message will appear. Select
“Yes”to complete the settings.
2. Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.
If you select “Manual”, follow the following
instruction to set the IP address and DNS.
a) Use [K/L] to select “IP Address”, “Subnet Mask”
or “Default Gateway”, then press [OK]. IP address
setting screen will appear. Enter IP address,
subnet mask and default gateway with cursor
buttons and number buttons.
Note
• The range of input numbers is between 0 and
255.
• If you enter a number larger than 255, the
number will automatically be 255.
Others
IP Address Setting
IP Address
xxx . xxx . xxx . xxx
• The manually entered addresses will be saved
even if you change the setting to “Auto(DHCP)”.
• When you enter a wrong number, press [CLEAR]
to cancel. (The number will be back to “0”.)
• If you want to enter 1 or 2 digit number in one
cell, press [B] to move on to the next cell.
• If the entered IP address or the default gateway
or primary DNS addresses is same as the
default setting, IP address setting will be set to
“Auto(DHCP)”. (The manually entered number
will be saved.)
• When IP address setting is set to “Manual”, the
setting of DNS setting will automatically be
“Manual”and when IP address setting is set to
“Auto(DHCP)”, you can set either “Auto(DHCP)”
or “Manual”for DNS setting.
Subnet Mask
xxx . xxx . xxx . xxx
Default Gateway
xxx . xxx . xxx . xxx
then press ‘OK’
• Enter the IP address number after checking
the specifications of your router.
• If the IP address is unknown, check the IP
address of other devices. (e.g. PC connected
via LAN cable) and assign a different number
from those of other devices.
b) After you enter all correctly, press [OK].
• Confirmation message will appear. Select
“Yes”to complete the settings.
Others
IP Address Setting
Is Setting OK?
Proxy Setting
1.Press [OK] repeatedly to select the desired
setting.
IP Address
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
Subnet Mask
Default Gateway
• For default settings, select “Do Not Use”.
• If you need to change the proxy setting as
instructed by your Internet service provider
to set the designated proxy address and port,
select “Use”.
If you select “Use”, follow the following
instructions to set the proxy address and
proxy port.
No
Yes
37
Download from Www.Somanuals.com. All Manuals Search And Download.
a) Use [K/L] to select “Proxy Address”, then press
[OK]. Proxy address setting screen will appear.
Enter proxy address.
• For proxy port, certain ports might be closed,
blocked or unusable depending on your
network environment.
• The keyboard screen will appear.
Connection Speed
You can set connection speed as your preference.
(The default setting is “Auto”.)
1. Press [OK] to show the options for
“Connection Speed”.
Others
Proxy Address
_
2. Use [K/L] to select the desired setting, then
press [OK].
1
a
k
u
2
b
l
3
c
m
w
4
d
n
x
5
e
o
y
6
f
p
z
7
g
q
.
8
h
r
9
i
s
_
0
j
t
“Auto”:
v
-
OK
Set the appropriate connection speed
automatically, in accordance with your network
environment.
Clear
All Clear
a/A/@
OK
[K/L/s/B] :
Move the highlight.
“10BASE Half”:
[the Number buttons] : Enter number.
Set the connection speed to “10BASE Half”.
“10BASE Full”:
[OK] :
Enter the highlighted number/
word.
Set the connection speed to “10BASE Full”.
“100BASE Half”:
[RED] :
[GREEN] :
Clear the entered number or
word.
Set the connection speed to “100BASE Half”.
“100BASE Full”:
Clear all the entered numbers
or words.
Set the connection speed to “100BASE Full”.
3. Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.
Note
[BLUE] :
[YELLOW] :
Switch between abc ? ABC ? @!?
Set the entered number or
word.
• Choose a connection speed in accordance with
your network environment.
• The network connection may be disabled
depending on the device, when the settings are
changed.
b) After you enter proxy address correctly, press
[YELLOW].
• Confirmation message will appear. Select
“Yes”to complete the settings.
Others
Proxy Address
BD-Live Setting
You can limit Internet access for BD-Live discs.
(The default setting is “Allow”.)
1. Press [OK] to show the options for “BD-Live
Setting”.
Is Setting OK?
xxxxx
2. Use [K/L] to select the desired setting, then
press [OK].
No
Yes
“Allow”:
Internet access is permitted for all BD-Live
contents.
c) Use [K/L] to select “Proxy Port”, then press
[OK]. Proxy port setting screen will appear. Enter
proxy port number with number buttons.
“Limited Allow”:
Internet access is permitted only for BD-
Live contents which have content owner
certificates. Internet access without the
certificates is prohibited.
Others
Proxy Address
Please select the input Proxy Port.
then press `OK’
“Prohibit”:
Internet access is prohibited for all BD-Live
contents.
xxxxx
3. Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.
MAC Address
You can check the MAC address of this unit. “MAC
Address”is for viewing only.
ꢀ Wireless
If you connect this unit to the network wirelessly, select
“Wireless”and set up necessary settings.
d) After you enter proxy port correctly, press [OK].
2. Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.
Note
• The range of input numbers for the port
number is between 0 and 65535. (If you enter
a number larger than 65535, it will be regarded
as 65535.)
38
Download from Www.Somanuals.com. All Manuals Search And Download.
<Wireless Router>
“None”:
In order to use a wireless network, you must set
up the connection to the wireless router.
Set the authentication setting to “None”.
“WEP”:
Set the authentication setting to “WEP”.
“WPA-PSK (TKIP)”:
Find wireless network
Search for wireless networks automatically and
select the wireless network name (SSID) from the
list.
Set the authentication setting to “WPA-PSK (TKIP)”.
“WPA-PSK (AES)”:
Set the authentication setting to “WPA-PSK (AES)”.
“WPA2-PSK (TKIP)”:
1. In “Network Connection” menu, use [K/L] to
select “Network Selection”, then press [OK].
2. Use [K/L] to select “Wireless”, then press
[OK].
Set the authentication setting to “WPA2-PSK
(TKIP)”.
“WPA2-PSK (AES)”:
3. Use [K/L] to select “Wireless Router”, then
press [OK].
Set the authentication setting to “WPA2-PSK
(AES)”.
4. Use [K/L] to select “Find wireless network”,
then press [OK].
7. “WEP/ WPA Key” entry screen will appear.
Enter the WEP/WPA key of the selected
wireless network using cursor buttons,
number buttons and color key, then press
[YELLOW].
• This unit will start searching for wireless
networks automatically.
5. The list of wireless networks will be
displayed. Use [K/L] to select the
appropriate wireless network name (SSID),
then press [OK].
• Confirmation message will appear. Select “Yes”
to complete the settings.
• This unit will start searching for the
authentication setting of the selected
wireless network automatically.
Others
Wireless Router
Is Setting OK?
SSID
API
WEP/WPA Authentication WPA2-PSK(AES)
Others
Find wireless network
WEP/WPA Key
**************...
AP1
AP2
AP3
No
Yes
AP4
AP5
AP6_Test
8. Following screen will appear. Use [K/L]
to select “Yes”, then press [OK] to go to
“Advanced Settings”.
1/ 2
Page Down
• For further operation, refer to “Advanced
Settings”on page 40.
If the unit finds the authentication setting of the
selected wireless network, skip to step 7. If the unit
fails to find the authentication setting automatically,
proceed to step 6 to select it manually.
Others
Find wireless network
Wireless router settings are incomplete.
Please use "Advanced Settings" to complete your setup.
6. Use [K/L] to select the authentication
setting of the selected wireless network,
then press [OK].
No
Yes
Others
Find wireless network
WEP/WPA Authentication
None
WEP
WPA-PSK (TKIP)
WPA-PSK (AES)
WPA2-PSK (TKIP)
WPA2-PSK (AES)
9. Press [SETUP] to exit.
Note
• For a wireless network with authentication
setting, key icon appears to the right hand of
the wireless network name (SSID).
• Signal icon shows the strength of the signal.
• WEP/WPA key appears as asterisks on the
confirmation screen.
• For a wireless network with authentication
setting, select the authentication setting,
according to the security type of the wireless
network.
• For a wireless network without authentication
setting, select “None”.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Easy (wireless)
Manually enter your SSID
To set the network setting to “Easy”(wireless),
follow the following procedure. For details of this
setting, refer to “Easy (Wired)”on page 36.
• If you select “Yes”in step 7 of “Find wireless
network”on page 39, skip to step 3.
1. Follow steps 1 to 2 in “Find wireless network”
on page 39.
Set up the connection to the wireless router
manually by entering the wireless network name
(SSID).
1. Follow steps 1 to 3 in “Find wireless network”
on page 39.
2. Use [K/L] to select “Manually enter your
SSID”, then press [OK].
• Wireless Router Name (SSID) entry screen
will appear. Enter the wireless network name
(SSID) using cursor buttons, number buttons
and color key, then press [YELLOW].
2. Use [K/L] to select “Advanced Settings”, then
press [OK].
3. Use [K/L] to select “Easy”, then press [OK].
Custom (wireless)
Others
Manually enter your SSID
Wireless Router Name (SSID)
_
To set the network setting to “Custom”(wireless),
follow the following procedure.
• If you select “Yes”in step 7 of “Find wireless
network”on page 39, skip to step 3.
1. Follow steps 1 to 2 in “Find wireless network”
on page 39.
1
a
k
u
2
b
l
3
c
m
w
4
d
n
x
5
e
o
y
6
f
p
z
7
g
q
.
8
h
r
9
i
s
_
0
j
t
v
-
OK
2. Use [K/L] to select “Advanced Settings”, then
press [OK].
Clear
All Clear
a/A/@
OK
3. Use [K/L] to select “Custom”, then press
[OK].
• List of authentication settings will appear.
3. Follow steps 6 to 9 in “Find wireless network”
on page 39.
• For details of each setting, refer to following
pages.
“IP Address Setting” / “DNS Setting”:
Refer to“IP Address Setting / DNS Setting”on page 37.
“Proxy Setting”:
Wireless Router Status
You can check the current status of “Wireless
Router”setting.
Refer to “Proxy Setting”on page 37.
“BD-Live Setting”:
1. Follow steps 1 to 3 in “Find wireless network”
on page 39.
Refer to “BD-Live Setting”on page 38.
“MAC Address”:
2. Use [K/L] to select “Wireless Router Status”,
then press [OK].
Refer to “MAC Address”on page 38.
Note
• The list of current wireless router settings,
and the confirmation message will appear.
Select “Yes”to complete the settings.
3. Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.
• You cannot select “Advanced Settings”if
“Wireless Router”setting is not completed.
ꢀ Disable
Deactivate all the network connection and
settings.
<Advanced Settings>
1. In “Network Connection” menu, use [K/L] to
select “Network Selection”, then press [OK].
2. Use [K/L] to select “Disable”, then press
[OK].
After you set up the “Wireless Router”setting,
set the network setting to “Easy”(wireless) or
“Custom”(wireless).
3. Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.
Note
• The network connection can be reactivated
by setting network connection to “Wired”or
“Wireless”.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Update
The indicators show the progress status...
(Success) PLAY indicator lights up.
[SETUP]B B“Other“B“Software Update”
STOP
PLAY
STANDBY/ON
This unit lets you update the software yourself
using a software update disc.
To update the software, you must first download
the latest version software to a disc, then execute
“Software Update”.
(Error)* PLAY and STANDBY/ON indicators flash.
STOP
PLAY
STANDBY/ON
Current Version
* If the indicator shows Error...
1) Unplug the AC power cord for about 10
seconds, re-plug AC power cord and then turn
the unit on.
2) Confirm the current software version.
3) If the software version is updated, the software
update has succeeded. If not, please try again.
Note
• Please do not unplug the AC power cord while
updating the software.
• All settings will remain the same even if you
update the software version.
ꢀ Network Update
You can update the software by connecting the
unit to the Internet.
1. In “Software Update” menu, use [K/L] to
select “Network Update”, then press [OK].
2. Use [K/L] to select “Yes”, then press [OK].
• This unit will then start checking for the latest
software version.
3. Confirmation message will appear. Use
[s/B] to select “Yes”, then press [OK].
• The unit will start downloading the latest
software version.
4. When the download completes, confirmation
message will appear. Press [OK].
• The unit will start updating the software
version.
You can confirm the current software version.
1. In “Software Update” menu, use [K/L] to
select “Current Version”, then press [OK].
2. Press [OK] or [RETURN] to exit.
ꢀ Disc Update
1. Prepare a software update disc:
the latest version software to a blank disc by
following the directions described on the site.
• Use a blank disc and download one software
per disc.
• For more details on how to download the
software, please refer to the site.
2. In “Software Update” menu, use [K/L] to
select “Disc Update”, then press [OK].
3. Use [K/L] to select “Yes”, then press [OK].
• Disc tray will open automatically.
4. Insert the software update disc obtained at
step 1.
5. After completing loading disc, confirmation
message will appear. Select “Yes” and press
[OK] to start updating.
6. After the disc update finishes, this unit will
restart and eject the disc.
• It may take a while to complete the updating.
5. After updating finishes, this unit will restart
and open the disc tray automatically.
Note
• In order to update the software via the Internet,
you must connect the unit to the Internet and
set up necessary settings.
• For network connection, refer to “Connection to
the Network”on page 12.
• For network setup, refer to “Network
Connection”on page 36.
• Please do not unplug the AC power cord or LAN
cable while executing the “Network Update”.
• All settings will remain the same even if you
update the software version.
• The disc tray will open automatically after
updating finishes. This is not a malfunction.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Initialize
Menus to reset player settings, format SD card,
clear erased BD-ROM data or network settings,
and deactivate VUDU.
1. In stop mode, press [SETUP].
2. Use [K/L] to select , then press [OK].
3. Use [K/L] to select a desired option, then
press [OK].
“Setup”:
Resets the setup menu to the default.
The setting for “Parental”, “Network
Connection”and “Mode Select”will not be
reset.
“Format SD Card”
(Available only when an SD Memory Card is
inserted.):
Initializes the SD Memory Card. After
confirmation message appears, use [K/L] to
select “Yes”, then press [OK].
“Erase Saved BD-ROM Data (Player)”:
Clears the data saved for the BD-ROM
contents, such as BD-ROM game scores, from
this player.
“Erase Saved BD-ROM Data (SD Card)”
(Available only when an SD Memory Card is
inserted.):
Clears the supplemental data for the BD-ROM
playback, such as subtitle data, from the SD
Memory Card.
“Network Settings”:
Resets the network setting to the default.
“Vudu Deactivate”:
Deactivates the connection to VUDU.
Initialize
Setup
Format SD Card
Erase Saved BD-ROM Data(Player )
Erase Saved BD-ROM Data(SD Card)
Network Settings
Vudu Deactivate
4. Confirmation message will appear. Use [K/L]
to select “Yes“, then press [OK].
• Press [OK] again to complete the settings.
5. Press [SETUP] to exit.
Note
• Do not remove the SD Memory Card while
executing the “Format SD Card”or the “Erase
Saved BD-ROM Data (SD Card)”. It damages the
card.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHERS
Troubleshooting
If the unit does not perform properly when operated as instructed in this manual, check the unit,
consulting the following checklist.
Problem
No power.
Solution
- Check if the AC cord is properly connected.
- Unplug the AC cord once, and wait for 5-10 seconds and then plug it
in again.
No sound or picture.
- Check if the connected TV is turned on.
- Check if the connections are made securely and correctly.
- Check whether the connected TV or other device supports HDCP. (This
unit will not output a video signal unless the other device supports
HDCP.)
- Check whether the output format of this unit (HDMI FORMAT) matches
the supported input format of other connected device.
No audio / video signal on the - If the unit is connected to the unauthorized display device with an
display device via HDMI cable. HDMI cable, the audio / video signal may not be output.
- Perform an HDMI cable hotplug, wherein you disconnect the HDMI
cable from the TV and this unit and then reconnect it to both the
devices while they are powered on.
- Ensure that your HDMI cable is certified.
Distorted picture.
- Sometimes a small amount of picture distortion may appear. This is
not a malfunction.
- Connect this unit directly to the TV. If the audio / video cables are
connected to a VCR, pictures may be distorted due to the copy right
protection system.
Completely distorted picture - Make sure the disc is compatible with this unit.
or black / white picture with
BD / DVD.
No sound or distorted sound. - Adjust the volume.
- Check if speakers are connected correctly.
- Check the HDMI connections.
- Check the settings in “Audio”menu.
Picture freezes momentarily
during playback.
- Check the disc for fingerprints / scratches and clean with a soft cloth
wiping from center to edge.
- Clean the disc.
Disc cannot be played back.
- Clean the disc.
- Ensure the disc label is facing up.
- Check if the disc is defective by trying another disc.
- Cancel the ratings control or change the control level.
- Insert a correct disc that can be played back on this unit.
- The format of the card does not match that accepted by this unit or
the card is not compatible.
SD Memory Card cannot be
read.
No return to start-up screen
when disc is removed.
- Reset this unit by turning it off, then on again.
The unit does not respond to - Aim the remote control directly at infrared sensor window on the front
the remote control.
panel.
- Reduce the distance to infrared sensor window.
- Replace the batteries in the remote control.
- Re-insert the batteries with their polarities (+ / - signs) as indicated.
Buttons do not work or the
unit stops responding.
- To completely reset the unit, press and hold [y STANDBY/ON] on the
front panel for 10 seconds to shut down the unit or unplug the AC
cord from the AC outlet for 5-10 seconds.
The unit does not respond to - Operations may not be permitted by the disc. Refer to the instructions
some operating commands
during playback.
of the disc.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Solution
The unit cannot read BD /
- Condensation? (Let sit 1 or 2 hours)
DVD/ CD.
- Check if the disc is compatible with this unit.(Refer to page 14 .)
- Wipe the dirt off the disc or replace the disc.
Angle does not switch.
- The angle cannot be switched for BD / DVD which do not contain
multiple angles. In some cases multiple angles are only recorded for
specific scenes.
Playback does not start when - Check the settings in “Parental”menu.
the title is selected.
The password for rating level - Enter the default password “4737”, then your forgotten password will
has been forgotten.
Cannot connect to the
network.
be cleared.
- Check if the LAN cable connection is properly made.
- Turn on the modem or broadband router.
- Check the network setting.
- Check if the broadband router and/or modem is correctly connected.
- Check the “BD-Live Setting”.
- When connecting directly to a modem via a LAN cable, you might
need to power cycle the modem to reset settings on the modem.
Cannot use the wireless
connection.
- Once you have activated the wireless connection please wait 30
seconds for the connection to be established after turning on the unit,
before trying to access network features such as BD-Live or VUDU.
Cannot connect to the
network while my PC is
connected to the network.
The capacity of the SD card
decreased.
- Check the content of your Internet service contract to see if your
Internet service provider prevents multiple terminals connecting at
the same time.
- Data may be written to the SD card when a BD-video that supports the
virtual package is used and an SD card is in the slot.
Cannot use the BD-Live
- Insert an SD card with enough capacity (1GB or more).
function or download of data - Check if an SD card is correctly inserted.
does not perform properly.
- Make sure the write-protect switch on the SD card is not enabled.
Cannot play back BD-video
(BD-ROM Profile 2.0).
- Insert an SD card(1GB or more) which is formatted on this unit.
- Some discs with BD-Live function require memory when playing back
the content.
- Do not remove the card during playback.
- Make sure the write-protect switch on the SD card is not enabled.
The picture quality of
streaming movie (VUDU) is
poor.
- Check the speed of your Internet connection. You need speeds of at
least 8 Mbps to this player for high quality uninterrupted playback.
Streaming movie (VUDU)
- Contact your Internet service provider to troubleshoot your Internet
often stops or starts buffering connection for speed and line quality. Consistent line quality and
during playback.
speed are very important for Internet video playback.
- Check if the network connection is properly made.
- You need to activate the VUDU account. (Refer to page 25)
information.
Cannot use VUDU feature.
Cannot rent or buy movies /
TV episodes on VUDU.
Note
• Some functions are not available in specific modes, but this is not a malfunction. Read the description
in this manual for details on correct operations.
• Some functions are prohibited on some discs.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
Language
A-B
Code
Language
French [FRE]
Code
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
Language
Macedonian
Code
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
Language
Siswat
Code
6565
6557
6558
6561
5165
6567
6569
65681
Abkhazian
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
Frisian
Malagasy
Malay
Slovak [SLO]
Slovenian
Somali
Afar
Galician
Afrikaans
Albanian
Amharic
Arabic
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Malayalam
Maltese
Spanish [SPA]
Sundanese
Swahili
Maori
Marathi
Armenian
Assamese
Aymara
Moldavian
Mongolian
Nauru
Swedish [SWE]
Gujarati
T
Hausa
Tagalog
Tajik
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
Azerbaijani
Bashkir
Hebrew
Nepali
Hindi
Norwegian [NOR]
O-R
Tamil
Basque
Hungarian [HUN]
I-K
Tatar
Bengali;Bangla
Bhutani
Occitan
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
Telugu
Thai
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
Oriya
Bihari
Oromo (Afan)
Panjabi
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
Bislama
Breton
Pashto;Pushto
Persian
Bulgarian [BUL]
Burmese
Byelorussian
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Polish [POL]
Portuguese[POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
C-E
Cambodian
Catalan
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
U-Z
Ukrainian
Urdu
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Chinese [CHI]
Corsican
Uzbek
Croatian
Kinyarwanda
Kirghiz
Samoan
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
Vietnamese
Volapuk
Welsh
Czech [CZE]
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
Sangho
Kirundi
Sanskrit
Korean [KOR]
Kurdish
Scots Gaelic
Serbian
Wolof
Xhosa
L-N
Serbo-Croatian
Sesotho
Yiddish
Yoruba
Zulu
Laothian
Latin
5861
5847
5868
5860
5866
F-H
Setswana
Shona
Faroese
5261
5256
5255
Latvian;Lettish
Lingala
Fiji
Sindhi
Finnish [FIN]
Lithuanian
Singhalese
Note
• If you choose a language that has a 3-letter-language code (written in bracket), the code will be
displayed every time you change the audio setting on page 24 or subtitle language setting on page 23. If
you choose any other languages, “---”will be displayed instead.
Servicing
• Please refer to relevant topics on “Troubleshooting”on page 43 before returning the product.
• If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-
serviceable parts inside. Turn the unit to the standby mode, unplug the power plug, and please
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Signal system
NTSC color
Power requirements
Power consumption
Dimensions (width x height x depth)
Weight
120 V AC, 60 Hz
16 W (standby: 0.5 W)
14.2 x 2.0 x 8.5 inches (360 x 50 x 214.5mm)
4.04 lbs. (1.83 kg)
Operating temperature
Operating humidity
41°F (5°C) to 104°F (40°C)
Less than 80 % (no condensation)
Terminals (Rear)
Video output (RCA jack x 1)
HDMI output (HDMI jack x 1)
Audio output (Analog) (RCA jack x 2)
Audio output (Digital) (RCA jack x 1)
LAN terminal
1 Vp-p (75Ω)
Video: 480p, 720p, 1080i, 1080p, 1080p24 / Audio
L/R: 2 Vrms (output impedance: more than 1kΩ)
500 mVp-p (75Ω)
10BASE-T/100BASE-TX
Wireless LAN
IEEE 802.11 b/g/n
Note
• The specifications and design of this product are subject to change without notice.
NETWORK SERVICE DISCLAIMER
Network Service Disclaimer
Content and services made available through this product are transmitted by third parties by means of
networks and transmission facilities over which Company has no control and third party services may
be terminated or interrupted at any time, and Company makes no representation or warranty that any
content or service will remain available for any period of time. Without limiting the generality of this
disclaimer, Company expressly disclaims any responsibility for any interruption or suspension of any
content or service made available through this product. Company is not responsible for customer service
related to the content and services. Any question or request for service relating to the content or services
should be made directly to the respective content and service providers.
THIRD PARTY CONTENT AND SERVICES MADE AVAILABLE THROUGH THIS PRODUCT ARE PROVIDED
“AS IS.”COMPANY DOES NOT WARRANT CONTENT OR SERVICES SO PROVIDED, FOR ANY PURPOSE
WHATSOEVER. COMPANY EXPRESSLY DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED INCLUDING
WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
ACCURACY, VALIDITY, TIMELINESS, LEGALITY, SUITABILITY, OR QUALITY OF ANY CONTENT OR SERVICE
MADE AVAILABLE THROUGH THIS PRODUCT.
IN NO EVENT SHALL COMPANY BE LIABLE FOR, ANY DAMAGES, WHETHER ARISING IN CONTRACT
OR TORT, INCLUDING WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES, LOST PROFITS, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES
ARISING OUT OF, OR IN CONNECTION WITH, ANY CONTENT (OR ANY INFORMATION CONTAINED
THEREIN) OR SERVICE PROVIDED TO THE USER OR ANY THIRD PARTY, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
All content and services accessible through this product belong to third parties and are protected by
copyright, patent, trademark and/or other intellectual property rights. Such content and services are
provided solely for the User’s personal noncommercial use. User may not use any content or services in
a manner that has not been authorized by the content owner or service provider. Without limiting the
foregoing, unless expressly authorized by the applicable content owner or service provider, you may
not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or
distribute in any manner or medium any content or services made available through this product.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
47
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or
workmanship as follows:
DURATION:
PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from
the date of original retail purchase. Certain parts are excluded from this warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the
date of original retail purchase.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR
OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO
OBTAIN SERVICE UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced,
defaced, missing or if service was attempted by an unauthorized service center. This limited warranty
does not apply to any product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occur during
normal use. It does not cover damage which occurs in shipment, or failures which are caused by
repairs, alterations or products not supplied by FUNAI CORP., or damage, which results from accident,
misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance,
commercial use such as hotel, rental or office use of this product, or damage which results from fire,
flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL
OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED
STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE
CENTER.
THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF
NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS
WILL BE CHARGED.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT
VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO
OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT
PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either
its original packaging or packaging affording an equal degree of protection, to any AUTHORIZED
SERVICE CENTER. FUNAI CORP. will not reimburse you for any service done by unauthorized service
providers without prior written approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please
contact us at:
FUNAI SERVICE CORPORATION
Tel: 1-800-605-8610
2200 Spiegel Drive Groveport, OH 43125
E5S02UD/E5S03UD 1VMN29959A ★★★★
Printed in China
*
1
V
M
N
2
9
9
5
9
A
*
Download from Www.Somanuals.com. All Manuals Search And Download.
|