Extron electronic Stereo Receiver MLC 62 D User Manual

medialink  
MLC 62 D  
Eight customizable backlit buttons  
Mounts in a Decora-style wallplate  
®
baSic MediaLiNk  
cONtrOLLerS  
Volume control with level status  
indicators  
®
decOra verSiON  
Universal display control  
– MLC 62 IR D offers IR control  
– MLC 62 RS D offers IR and RS-232  
control  
Simple and Easy-to-use A/V System Control  
Centralized A/V and room control  
– MLC 62 RS D has two relays and  
one digital input for controlling  
screens and lighting  
Configuration options: IR learning  
and easy-to-use Extron configuration  
software  
Inactivity timer for display shutoff  
Front panel security lockout  
Section 508 compliant  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M L C 6 2  
D
introduction  
Inactivity Timer  
MLC 62 D controllers are equipped with an adjustable timer that  
automatically shuts down the projector or flat panel display after  
inactivity, to conserve energy and extend projector lamp life.  
Macro Capability and Toggle Mode  
IR Learning  
USB Port  
With the MLC 62 D’s macro capability, any button can be  
configured to execute multiple actions. For instance, the touch  
of a single button could trigger commands to turn on the display,  
select the display’s computer input, and trigger a relay for screen  
control. Toggle mode provides additional flexibility by allowing  
two different sets of commands to be executed with alternating  
presses of a button.  
Easy configuration without having to remove  
installed controller  
Free Extron Certified Projector Drivers  
Extron creates and administers a large library of certified, ready-  
to-use device drivers. Drivers designated as "Extron Certified"  
were written by Extron and have been reviewed and tested with  
third party devices. These IR and RS-232 drivers allow MLC 62 D  
controllers to communicate with a display device, enabling control  
of basic projector functions such as power, input selection, and  
to download drivers for the latest and most popular displays.  
Easy to Configure  
The MLC 62 D controllers offer easy setup using configuration  
software or IR learning. Easy-to-use Extron configuration software  
provides fast and simple setup via USB, and includes support for  
the extensive library of Extron certified, ready-to-use IR and RS-232  
device drivers. The USB port is conveniently located behind the  
removable Decora wallplate for easy configuration access without  
having to remove the installed controller. Configurations may be  
saved, then restored to other controllers for replicating common  
room configurations. IR learning allows the controller to be set up  
directly from the display's IR remote without the need for software  
and a PC.  
Room Control  
The MLC 62 RS D has two relays, which allow it to control room  
functions, such as raising or lowering a projector screen, and  
turning lighting on or off. In addition, a digital input allows the  
MLC 62 RS D to monitor a switch or sensor.  
MLC 62 IR D and MLC 62 RS D Port Comparison  
MLC 62 IR D  
The MLC 62 IR D is ideal for many basic  
MLC 62 IR D  
MLC 62 RS D  
classroom and conference room applications.  
It offers an IR port for controlling the display  
device.  
Buttons  
IR  
6
1
8
RS-232  
IR/RS-232*  
Relay  
1
1
2
1
MLC 62 RS D  
The MLC 62 RS D is ideal for rooms where  
additional control is necessary. It offers a  
dedicated unidirectional RS-232 port and a  
configurable port that supports either IR or  
RS-232. These ports allow up to two devices  
to be controlled, such as a display and a  
switcher, or a source device. Two relays allow  
the MLC 62 RS D to control screen functions  
or lighting. A digital input allows monitoring of  
a switch or sensor.  
Digital In  
*Configurable IR/RS port can be either IR or RS-232  
MLC 62 IR D - Back  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M L C 6 2  
D
MLc 62 d configuration Software  
MLC 62 D products are simple and easy to configure…  
no programming knowledge is required  
Extron’s free MLC 62 configuration  
software puts all of the most commonly  
used system control options at your  
fingertips. One of the costliest aspects  
of building an A/V control system, in  
terms of human resources and time, is  
programming. A/V system programming  
can be a complex task that requires the  
skills of an experienced programmer.  
Extron’s configuration approach offers  
tremendous benefits over traditional  
system programming methods. Configuring  
MLC 62 D controllers is as simple as  
selecting choices from intuitive, drop-down  
menus instead of writing, compiling, and  
debugging complicated computer source  
code. Should system changes need to be  
made in the future, such as a new display  
device, need to be made in the future, an  
System Changes Take Less Time  
Configuration means that initial system setup time  
is reduced, and there’s no need to delay making  
changes because you are waiting for a hard-to-find  
programming resource.  
Nearly Anyone Can Configure A System  
Non-programmers can use our free MLC 62  
configuration software to build a complete A/V  
control system, freeing up programmers for other  
projects.  
experienced programmer is not required.  
PWR ON: 02 00 01 00  
Projector Manufacturers  
Manual  
IR Remote  
PC  
Projector  
Extron offers thousands of drivers from many major  
projector and display manufacturers  
Extron-provided software allows  
for customized projector control  
IR Learning from a handheld IR Remote  
Free Extron Certified Projector Drivers  
IR Learning  
Custom Serial RS-232 Control  
Extron creates and administers thousands of certified,  
ready-to-use projector control drivers. These IR and  
serial RS-232 drivers allow MediaLink Controllers to  
communicate with any display device. They enable  
control of basic projector functions such as power,  
input selection, and volume adjustment. Go to the  
drivers for the latest and most popular displays.  
Serial RS-232 is the preferred method  
of control; however, many ultra portable  
projectors and flat panel displays can only  
support IR control. The MLC 62 IR D and the  
MLC 62 RS D can learn IR commands from  
virtually any handheld IR remote control  
In environments where customizable projector  
control is needed, integrators can easily enter in  
their own RS-232 commands on the MLC 62 RS D.  
RS-232 commands can be assigned to any button  
using the provided configuration software. The  
MediaLink Controllers will work with virtually any  
projector.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M L C 6 2  
D
Overview  
Visual and Audible  
Feedback  
LED blinks green to indicate  
Eight Soft Touch Buttons  
Buttons are clearly labeled for easy  
identification. Soft touch buttons  
provide an intuitive feel and  
ease-of-use  
power on and button presses are  
confirmed with audible chirps  
Compact Size  
One-gang design easily mounts  
in a wall or lectern  
Volume Control  
Provides up and down  
volume control of the  
display with LED lights that  
show audio levels  
Display ON/OFF  
Clearly labeled buttons make it  
easy to turn the display on and  
off, eliminating the need for a  
handheld IR remote  
Decora-style Wallplate  
Adds a contemporary look  
that blends in with any A/V  
environment. Black and white  
faceplates included  
Backlit Buttons  
Illuminated buttons can be  
customized with supplied  
replacement buttons for easy  
labeling. Backlighting is helpful  
for presenters in low-light  
environments  
Front Panel Lockout  
Safeguards the system  
from unauthorized access.  
Multiple Memories  
Each button can store multiple  
IR or serial RS-232 commands  
MLC 62 RS D - Front  
Certified Drivers  
Digital input  
Thousands of certified ready-to-  
use device drivers communicate  
with display device, enabling  
control of basic projector  
functions.  
Provides monitoring for a  
sensor or switch  
Two Relays  
Controls room functions  
such as lowering projector  
screens and turning lights  
on/off  
Inactivity Timer for  
Display Shut-off  
Adjustable timer controls  
automatic shutdown to  
conserve energy, and  
extend projector lamp life  
RS-232 and IR ports  
RS-232 and IR universal  
display control  
MLC 62 RS D - Back  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M L C 6 2  
D
Specications  
Control — host ports  
Serial control port......................................... 1 bidirectional RS-232 on a 3.5 mm captive screw  
connector, 3 pole  
DISPLAY  
ON OFF  
GROUNG  
Rx  
Tx  
VOLUME  
GROUNG  
1
Baud rate and protocol................................. 9600 baud, 8 data bits, 1 stop bit, no parity  
Serial control pin configurations .................. Pin 1 = TX, pin 2 = RX, pin 3 = GND  
USB control ports ......................................... 1 front panel female mini USB B  
USB standards.............................................. USB 2.0, low speed  
IR learning frequencies ................................ 30 kHz to 150 kHz  
IR learning distance ..................................... 4" (10 cm) to 14" (36 cm) from the receiver (on front panel  
for Decora models, side panel for EU models)  
COMMON  
2
1
PC  
VIDEO  
GROUNG  
Tx/IR  
GROUNG  
Tx  
LAPTOP MUTE  
GROUNG  
+12 VDC  
®
MLC 62 RS D  
MLC 62 RS D  
Program control............................................ Extron’s configuration program for Windows  
Extron’s Simple Instruction Set (SIS™  
)
Control — serial port s(rs models)  
DISPLAY  
ON OFF  
GROUND  
Display control port...................................... (1) 3.5 mm captive screw connector, 2 pole for  
unidirectional RS-232 control ( 5 V)  
Rx  
Tx  
VOLUME  
Baud rate and protocol (RS-232).................. 9600 (default), 19200, 38400, 57600, 115,200 baud; 8  
(default) or 7 data bits; 1 stop bit; no parity (default), or  
PC  
GROUND  
IR OUT  
even or odd parity  
VIDEO  
GROUND  
+12 VDC  
Extron  
Control — ir port (ir models) or ir/serial port (rs models)  
IR control port............................................... (1) 3.5 mm captive screw connector, 2 pole for IR or IR/  
Serial* (transmit only)  
MLC 62 IR D  
MLC 62 IR D  
TTL level (0 to 5 V) modulated infrared control (all  
models) from 30 kHz up to 150 kHz, or 5 V RS-232  
control (RS models, transmit only)  
*IR/serial ports are configurable via software, serial  
communication is the default.  
Mounting  
Rack mount................................................ No  
Furniture or wall mount  
Decora® models.......................................... Yes, with included hardware and mud ring or user-supplied  
standard 1 gang US electrical box  
Baud rate and protocol................................. For RS models:  
9600 (default), 19200, 38400, 57600, 115,200 baud; 8  
(default) or 7 data bits; 1 stop bit; no parity (default), or  
even or odd parity  
Enclosure type.............................................. Plastic  
Enclosure dimensions  
MLC 62 IR D, MLC 62 RS D  
Faceplate ................................................... 2.6" H* x 1.3" W x 0.2" D  
(6.6 cm H* x 3.3 cm W x 0.4 cm D)  
Control — relay (rs models)  
(Fits the opening in a 1 gang Decora® faceplate. *Height is  
2.8" [7.0 cm] and width is 1.5" [3.8 cm] including outer  
shoulders.)  
Number/type ................................................ 2 momentary or latching (configurable via software)  
Connector..................................................... (1) 3.5 mm captive screw connector, 3 pole  
Contact rating............................................... 24 V, 1 A  
Device........................................................ 2.8" H x 1.8" W x 0.9" D  
(7.0 cm H x 4.5 cm W x 2.1 cm D)  
Control — digital input monitoring port (rs models)  
(Overall rear dimensions, including connectors. Allow at  
least 1.5" [3.7 cm] depth in the wall or furniture for device  
and cable clearance.)  
Number/type ................................................ 1 digital input (configurable)  
Connector..................................................... (1) 3.5 mm captive screw connector, 2 pole  
Digital inputs  
Input voltage range ..................................... 0-24 VDC  
Input impedance......................................... 28k ohms  
Programmable pullup.................................. 2k ohms to +5 VDC  
Threshold low to high.................................. >1.6 VDC  
Threshold high to low.................................. <1.2 VDC  
Product weight  
MLC 62 IR D, MLC 62 RS D......................... 1.0 lb (0.5 kg)  
MLC 62 RS EU............................................ 1.0 lb (0.5 kg)  
Shipping weight ........................................... 3 lbs (2 kg)  
Vibration....................................................... ISTA 1A in carton (International Safe Transit Association)  
Regulatory compliance  
Safety ........................................................ CE, c-UL, UL  
EMI/EMC.................................................... CE, C-tick, FCC Class A, ICES, VCCI Class A  
Accessibility ............................................... Section 508 of the Rehabilitation Act (29U.S.C.794d)  
MTBF ............................................................ 30,000 hours  
Warranty....................................................... 3 years parts and labor  
NOTE: All nominal levels are at 10%  
General  
External power supply.................................. 100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A,  
regulated  
Power input requirements............................ 12 VDC, 0.4 A, max.  
Temperature/humidity.................................. Storage: -40 to +158 ˚F (-40 to +70 ˚C) / 10% to 90%,  
noncondensing  
Model  
Version Description  
Part number  
Operating: +32 to +122 ˚F (0 to +50 ˚C) / 10% to 90%,  
noncondensing  
MLC 62 RS D  
MLC 62 IR D  
IR and RS-232 Control - Decora faceplate .................................60-1005-02  
IR Control - Decora faceplate ....................................................60-1006-02  
Cooling ......................................................... Convection, no vents  
MLM 62 D 6B  
MLM 62 D 8B  
Six button bezel kit w/ buttons for MLC 62 D ............................. 70-688-02  
Eight button bezel kit w/ buttons for MLC 62 D .......................... 70-688-12  
Specifications are subject to change without notice.  
Extron USA - West Extron USA - East Extron Europe  
Extron Asia  
Extron Japan  
Extron China  
Extron Dubai  
Headquarters  
+800.633.9876  
+800.3987.6673  
+800.7339.8766  
+81.3.3511.7655  
+81.3.3511.7656 FAX  
+400.883.1568  
+971.4.2991800  
+971.4.2991880 FAX  
Inside USA / Canada Only  
Inside Europe Only  
Inside Asia Only  
Inside China Only  
+800.633.9876  
Inside USA / Canada Only  
+1.919.863.1794  
+1.919.863.1797 FAX  
+31.33.453.4040  
+31.33.453.4050 FAX  
+65.6383.4400  
+65.6383.4664 FAX  
+86.21.3760.1568  
+86.21.3760.1566 FAX  
+1.714.491.1500  
09-05  
68-1767-01  
REV. A  
+1.714.491.1517 FAX  
www.extron.com © 2009 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Earthquake Sound Car Speaker HD250 X User Manual
Echo Edger 99944200475 User Manual
Everpure Water System 7CB5 K User Manual
Excalibur electronic Home Safety Product H691 User Manual
Fagor America Convection Oven 6HA 200 TDX User Manual
Frigidaire Dishwasher FBD2400KB User Manual
Furuno SONAR CI 60G User Manual
GBC Binding Machine P70IX User Manual
GE Conference Phone Feb 74 User Manual
Gibson Guitars Guitar 1550 07 GUS User Manual