| CONVERTIBLE   HAND/STAND MIXER   OWNER’S MANUAL   Model EP585W/EP585WR/ EP585WL   127V., 60Hz., 325 Watts   EURO-PRO Operating LLC   Boston, MA, 02465   1 (800) 798-7398   COPYRIGHT© EURO-PRO OPERATING LLC 2008   Download from Www.Somanuals.com. All Manuals Search And Download.   Read all the sections of this booklet and follow all the instructions carefully.   OPERATING INSTRUCTIONS   OPERATING INSTRUCTIONS   3. While the hand mixer is still in the   Assembling the Hand Mixer to   the Stand   raised position, insert either the   beaters or the dough hooks.   4. To lower the hand mixer, press and   hold the tilt button with one hand   while holding the hand mixer with the   other hand and slowly lower the hand   mixer down. (Fig. 6)   Warning: To avoid injury when   inserting or removing beaters or   dough hooks, always set the speed   selector on “0” and unplug the appliance.   1. Before using your Convertible   Hand/Stand Mixer for the first time,   wash the beaters, dough hooks,   bowls and spatula in warm, sudsy   water. Rinse and dry thoroughly. Use   a damp cloth to wash over the mixer   base and the hand mixer. Dry with a   soft cloth. NEVER immerse the base   stand or the hand mixer in water or   any other liquids.   Attaching the Dough Hooks to   the Hand Mixer   Warning: To avoid injury when   assembling the hand mixer to the   stand, always set the speed selector on   “0” and unplug the appliance.   1. Ensure that the hand mixer is not   plugged in to an electrical outlet   and that the speed control switch   is on the “0” (off) position.   1. Press the tilt button, located on the   top of the support pivot . While the   button is depressed, ease the support   2. The dough hooks have a set   method of fitting into the hand   mixer because they are not   Press the   tilt button   and tilt the   hand   mixer   down   pivot back. (Fig. 4)   Tilt Button   identical. One has a grommet and   the other does not. (Fig. 2)   Support   Pivot   2. Before assembling your Convertible   Hand/Stand Mixer, make sure that the   power cord is unplugged from the   electrical outlet and that both the   speed control and the base speed   control dial are in the “OFF” position.   Grommet   Fig. 6   Fig. 4   Fig. 2   The support pivot will lock into this   raised position until it is released by   pressing the tilt button again.   5. To remove the hand mixer from the   pivot support, first raise the mixer by   pressing the tilt button and raise the   mixer up. (Fig. 7) the mixer will lock   into the raised position.   6. Then press the mixer release button   which is located on the under side of   the pivot support with one hand and   with the other lift the hand mixer by   the handle upwards and away from   the support pivot. (Fig. 8)   3. Looking at the under side of the   hand mixer, you will see that one   of the sockets has a red dot over   it. (Fig. 3) Insert the dough hook   with the grommet into this socket.   Attaching the Beaters to the   Hand Mixer   1. Ensure that the hand mixer is not   plugged in to an electrical outlet   and that the speed control switch   is on the “0” (off) position.   2. Insert the beaters into the sockets   on the under side of the hand   mixer and twist counter clockwise   until the beater is firmly fitted into   the socket.   3. To release the beaters from the   unit, press on the beater eject   button on the front of the unit and   they will pop out. (Fig. 1)   2. To connect the hand mixer to the   support pivot, locate the two retaining   prongs on the support pivot into the   two rectangular holes in the heel of   the hand mixer. (Fig. 5) When the   hand mixer is seated on the support   pivot, press down on the hand mixer   to click it into place and lock the hand   mixer and the support pivot together.   Grommet   Press the   tilt button   and tilt the   hand   mixer up   Rectangular   holes   Fig. 3   Press   eject   button   4. Then insert the other dough hook   into the other socket. Push both   dough hooks in until you hear a   click confirming that they are   securely in place.   Fig. 7   Retaining   prongs   Support   pivot   Fig. 5   5. To release the dough hooks from   the unit, press on the beater eject   button on the front of the unit and   they will pop out. (Fig. 1)   Note: Ensure that the beaters or   dough hooks are fully inserted into   the correct sockets or your mixing   results may be affected.   Note: Ensure that the two retaining   prongs on the support pivot are fully   connected into the hand mixer.   Hand   mixer   release   button   Fig. 1   Fig. 8   3 4 Download from Www.Somanuals.com. All Manuals Search And Download.   OPERATING INSTRUCTIONS   CARE & CLEANING   Warning: Before cleaning your   Fitting the Bowl onto the   Turntable of the Stand   Using the Convertible Hand/Stand   Mixer   Storing Your Hand/Stand Mixer   Hand/Stand Mixer, ensure that the   power is turned off and that the power   cord is not plugged into the electrical   outlet. Always switch off and unplug   before cleaning.   You can keep your Hand/Stand Mixer in   a convenient place on your kitchen   counter ready for use. Place the beaters   and dough hooks into the bowl. Storing   the beaters or dough hooks in a drawer   with other kitchen utensils may cause   damage.   Warning: To avoid injury when   assembling the hand mixer to the   stand, always set the speed selector on   “0” and unplug the appliance.   Warning: To avoid injury when   assembling the hand mixer to the   stand, always set the speed selector on   “0” and unplug the appliance.   1. Wipe the outside area of the   Hand/Stand Mixer with a damp cloth   and polish with a soft, dry cloth. NEVER   immerse the hand mixer, stand, plug or   power cord into water or any other   liquid.   1. Place the base of the mixing bowl   onto the turntable of the stand. To   fully lock the mixing bowl in place,   press down and turn the mixing bowl   in a clockwise direction until you hear   it click into place. (Fig. 9)   1. Before plugging the hand/stand mixer   into the electrical outlet, assemble the   unit with the desired accessories.   2. Set the speed selector switch to the   “HI” or “LO” position.   Never wind the power cord around the   motor after use as the warmth of the   motor may cause damage to the power   cord.   2. Wipe any excess food particles from   the power cord.   3. Select the speed that you desire.   3. To make cleaning easier, remove   beaters/dough hooks and wash right   away after use. Wash the mixing   bowl, beaters and dough hooks in   warm, soapy water. The stainless   steel mixing bowl, beaters and dough   hooks are dishwasher safe. The plastic   bowl, bowl lid and spatula are top rack   dishwasher safe ONLY. Do NOT use   scouring pads, harsh detergents or   abrasive cleaners to clean the bowls,   beaters or dough hooks. Dry with a soft,   clean cloth.   MIXING GUIDE   MIXING   TASK   RECOMMENDED   SPEED(S)   Folding &   Blending   “LO” 1 & 2   “LO” 3 & 4   Fig. 9   Light Mixing   Creaming &   Beating   “HI” 6 - 8 or “LO” 5   2. To remove the mixing bowl from the   stand, press down and turn the mixing   bowl counter clockwise. The mixing   bowl can now be detached from the   turntable and lifted away. (Fig. 10)   Whipping &   Aerating   “HI” 9 & 10 or   BURST   IMPORTANT INSTRUCTIONS   4. Select the bowl speed – “LO” or “HI”   depending on how fast you want the   bowl to turn. Use the “LO” bowl   speed for mixing speed 1-5. Use the   “HI” bowl speed for mixing speed   6-10. If you do not wish the bowl to   turn, leave the bowl speed in the   “OFF” position.   ALWAYS   NEVER   ALWAYS make sure that your hands are dry   before handling the plug or switching on the   appliance.   NEVER place your hand in the bowl while it is in   operation.   ALWAYS use the mixer on a dry, level surface.   NEVER use this appliance outdoors.   ALWAYS unplug unit from the electrical outlet   when not in use or when removing attachments   and before cleaning.   NEVER use this appliance for other than for   intended use. This appliance is for household use   only.   Note:   Fig. 10   • Always select the speed setting   before the mixing bowl speed to   prevent ingredients from being flicked   out of the mixing bowl.   Always start mixing at slow speeds   and increase the speed gradually to   prevent the ingredients splashing out   of the bowl.   NEVER mix dry, thick or heavy mixture for more   than 60 seconds without turning off the hand   mixer and stirring the ingredients before   continuing.   ALWAYS remove the beaters or dough hooks   from the mixer before washing.   Note: It is easier to fit the mixing bowl to   the turntable when the hand mixer is not   attached to the pivot support.   • ALWAYS avoid contact with moving parts while   unit is in operation. Keep hands, hair, clothing as   well as other utensils away from beaters/dough   hooks during operation.   NEVER use harsh, abrasive or caustic cleansers   to clean this appliance.   NEVER allow children to use this appliance   unsupervised.   NEVER leave this appliance unattended while in   use.   NEVER let the power cord to hang over the edge   of a table or counter, touch hot surface or   become knotted.   NEVER eject attachments with the unit operating.   5 6 Download from Www.Somanuals.com. All Manuals Search And Download.   EP585W   EP585WR   EP585WL   ONE (1) YEAR LIMITED WARRANTY   EURO-PRO OPERATING LLC warrants this product to be free from defects in   material and workmanship for a period of one (1) year from the date of purchase   when utilized for normal household use.   If your appliance fails to operate properly while in use under normal household   conditions within the warranty period, return the complete appliance and   accessories, freight prepaid. For Customer Service support, call 1 (800) 798-   If the appliance is found to be defective in material or workmanship, EURO-   PRO Operating LLC will repair or replace it free of charge. Proof of purchase   date and $12.95 to cover the cost of return shipping and handling must be   included.*   The liability of EURO-PRO Operating LLC is limited solely to the cost of the   repair or replacement of the unit at our option. This warranty does not cover   normal wear of parts and does not apply to any unit that has been tampered with   or used for commercial purposes. This limited warranty does not cover damage   caused by misuse, abuse, negligent handling or damage due to faulty packaging   or mishandling in transit.   This warranty is extended to the original purchaser of the unit and excludes all   other legal and/or conventional warranties. The responsibility of EURO-PRO   Operating LLC if any, is limited to the specific obligations expressly assumed by   it under the terms of the limited warranty. In no event is EURO-PRO Operating   LLC liable for incidental or consequential damages of any nature whatsoever.   Some states do not permit the exclusion or limitation of incidental or   consequential damages, so the above may not apply to you.   This warranty gives you specific legal rights, and you may also have other rights   which vary from state to state.   *Important: Carefully pack item to avoid damage in shipping. Be sure to   include proof of purchase date and to attach tag to item before packing   with your name, complete address and phone number with a note giving   purchase information, model number and what you believe is the problem   with item. We recommend you insure the package (as damage in shipping   is not covered by your warranty). Mark the outside of your package   “ATTENTION CUSTOMER SERVICE”. We are constantly striving to   improve our products, therefore the specifications contained herein are   subject to change without notice.   Printed in China   7 Download from Www.Somanuals.com. All Manuals Search And Download.   |