Electric Digital Kettle
OWNER’S MANUAL
Model EK119H
120V., 60Hz., 1800 Watts.
EURO-PRO Operating LLC
Boston, MA, 02465
1 (800) 798-7398
COPYRIGHT © 2008 EURO-PRO OPERATING LLC
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting To Know Your Electric Digital Kettle
FEATURES OF ELECTRIC DIGITAL KETTLE
1. LED TEMPERATURE DISPLAY
6. TEMPERATURE HOLD
BUTTON
The LED temperature display screen
will display the temperature selected.
Press this button to keep heated
water at the temperature selected.
2. LID RELEASE BUTTON
The lid release button allows you
to open the lid without touching hot
areas.
7. CONCEALED HEATING
ELEMENT
Concealed heating element
provides faster heating and easier
clean-ups.
3. POWER “ON” LIGHT
The power “On” light will illuminate
when the “On/Off” button is pressed
to the “On” position. It will turn off
when the “On/Off” button is pressed
to stop the boiling process or when
the desired temperature has been
reached.
8. POWER BASE WITH CORD
STORAGE
Allows for easy cord storage.
9. WATER LEVEL WINDOW
Easy-to-read indicators lets you
know how much water is left.
1. Lid
2. Anti-Scale Filter
3. Lid Hinge Pins
4. Pouring Spout
10.Power Connector
11.Temperature Hold Light
12.Power On Light
4. VARIABLE TEMPERATURE
CONTROL
13.On/Off Button
5. Main Unit
10. AUTO SHUT-OFF
14.Temperature Hold Button
15.LED Temperature Display
16.Variable Temperature Control
17.Control Panel
Turning this knob will select the
water temperature desired. The
temperature goes up in 10˚
increments from 80˚F to 210˚F.
210˚F is shown as a series of
automated symbols. Pushing this
knob will automatically set it to the
boiling point (210˚F).
6. Lid Release Button
7. Cool Touch Handle
8. Water Level Window
9. Power Base With Cord Storage
Will turn the unit off when the
water has reached the set
temperature or the kettle is empty.
11. SAFETY SHUT-OFF
Will turn the unit off if there is no
water left in the kettle.
Technical Specifications
Voltage:
120V., 60Hz.
Power:
1800 Watts
5. ANTI-SCALE FILTER
To protect your beverages from
water scale deposits.
Note: Illustrations may differ from actual unit.
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
8. To stop the temperature hold feature,
To Shorten Power Cord Length:
Wrap the extra cord length around
hidden cord storage until length is correct
for base placement. Make sure that the
cord has been properly wrapped and the
base is seated firmly.
Using Your Kettle
1. Lift the kettle off the base before
filling.
2. Press the lid release button for easy
filling. (Fig. 3)
Preparing Your Kettle
press the temperature hold button
one more time and the temperature
hold light will turn off.
BEFORE FIRST USE: Remove any
packaging material or stickers from your
kettle.
1. Place the power base on a flat, stable
surface.
2. Fill the kettle to the “Max” indicator on
the water level window (2 quarts /
2 liters). (Fig. 1)
3. Ensure that the anti-scale filter is
attached to lid. If it is not, then snap
the anti-scale filter into place.
4. Snap the lid onto the lid hinge pins
that are on either side of the kettle
and lock the lid in place.
5. Place the kettle on the power base
and press the On/Off button.
6. Set the variable temperature control
to the highest temperature setting
(210˚F) and let the water come to a
boil until the kettle shuts off
automatically. (Fig. 2)
7. Discard this water and repeat the
process one more time.
9. To turn the unit “Off”, depress the
On/Off button. The power “On” light
will turn “Off”.
10.Remove the kettle from the power
base for convenient and easy serving.
CAUTION: Do not place hot kettle
directly onto furniture or flammable
materials. Use a hot plate or cloth under
the kettle when placing on a table,
countertop or other furniture.
NOTE: The kettle will not turn on if the
temperature of the water in the kettle is
higher than the temperature selected.
11.After use, empty the kettle and ensure
that the temperature hold is “Off”.
The unit will automatically shut off
when the set temperature of the water
has been reached.
Lid Release
Button
Don’ts
•
Never use the cordless kettle for
boiling or heating anything other than
water.
•
•
Never place any utensils, containers
or baby bottles in unit.
Never immerse unit or power base in
water or any other liquid.
Never let unit run dry.
Never leave unit unattended when in
use.
Fig. 3
3. Fill the kettle to the desired amount of
water using the water level window as
your guide. Ensure that water is
between the ‘MIN’ and ‘MAX’ levels.
CAUTION: Do not allow kettle to boil dry
as this will cause damage to the kettle.
WARNING: If the kettle is overfilled,
there is a risk that water will spit out of
spout.
4. Make sure that the lid is securely
locked in place and that the kettle is
seated correctly on the base.
5. The LED temperature display on the
control panel will blink ‘OFF’ when
the kettle is placed on the power
base. Press the On/Off button to turn
the unit “On”. The power “On” light will
illuminate.
•
•
Do’s
•
•
Use caution when pouring hot water.
When boiling water for baby formula,
always boil water to boiling point
(210˚F) and then let it cool. Follow
the manufacturer’s instructions on
how to prepare the baby formula.
Always ensure that there is water in
kettle before turning the unit on.
Always use fresh water.
12.Unplug the power base from the
electrical outlet.
Care and Maintenance of Your
Kettle
8. Rinse the kettle two or three times.
The kettle is now ready for use.
•
WARNING: Always disconnect the
appliance from the power source before
cleaning. Never immerse the kettle or
base in water or any other liquid.
It is necessary to clean your cordless
kettle regularly to ensure optimum
performance. Mineral deposits in tap
water may cause the water level window
and the inside of the kettle to discolor.
1. To remove build-up, fill the kettle
with 1 part vinegar and 5 parts
water and leave it unplugged
•
•
Always unplug power base when unit
is not in use.
MAX
Level
•
•
Rinse the anti-scale filter regularly.
Hold kettle firmly when lifting from
power base.
6. Turn the variable temperature control
to the desired temperature, 80˚F to
210˚F or push it to set it directly to
210˚F. Once the temperature of the
water has reached the set
Hints & Tips
•
•
Boil water for hot water bottles.
Heat water for manicures and
pedicures.
Fig. 1
temperature, the unit will
automatically shut off and the power
“On” light will turn off.
overnight or for a period of
•
•
•
Boil water for baby formulas.
Warm water for warm compresses.
Boil water for tea, coffee and instant
soup broth.
approximately 8 hours. Do not use
cordless kettle while descaling
solution is inside.
7. If you wish to keep your water at the
set temperature, press the
temperature hold button. The
temperature hold light will now
illuminate. (Fig. 4)
2. After the period of soaking, empty
the kettle. Due to the fact that a small
amount of solution will be left in the
kettle, it is necessary to rinse the
kettle out with clean water 2 or 3
times. Your kettle is now ready for
use.
Fig. 2
Variable
Temperature
LED
Temperature
Display
Control
Temperature
Hold
Button
3. The outside of the kettle can be
wiped clean with a soft damp cloth.
NOTE: Never use any chemical, steel
wool, or abrasive cleaners to clean any
part of the kettle.
Fig. 4
Variable
Temperature
Control
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING GUIDE
EK119H
TROUBLESHOOTING GUIDE
ONE (1) YEAR LIMITED WARRANTY
EURO-PRO OPERATING LLC warrants this product to be free from defects in material and
workmanship for a period of one (1) year from the date of purchase when utilized for normal
household use.
PROBLEM
POSSIBLE REASON
POSSIBLE SOLUTION
1.
Depress On/Off button and
select a desired
temperature.
1.
Kettle has not been
programmed.
Flashing “Off” on LCD
If your appliance fails to operate properly while in use under normal household conditions within
the warranty period, return the complete appliance and accessories, freight prepaid. For
1.
2.
The kettle is not plugged
into a 120V AC electrical
outlet.
The ‘On/Off’ button was not
depressed to start the
heating process.
1.
2.
The kettle must be plugged
into a 120V AC electrical
outlet.
Depressed the ‘On/Off’
button to start the heating
process.
If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC
will repair or replace it free of charge. Proof of purchase date and $12.95 to cover the cost of
return shipping and handling must be included.*The liability of EURO-PRO Operating LLC is
limited solely to the cost of the repair or replacement of the unit at our option. This warranty does
not cover normal wear of parts and does not apply to any unit that has been tampered with or
used for commercial purposes. This limited warranty does not cover damage caused by misuse,
abuse, negligent handling or damage due to faulty packaging or mishandling in transit. This
warranty is extended to the original purchaser of the unit and excludes all other legal and/or
conventional warranties. The responsibility of EURO-PRO Operating LLC, if any, is limited to
the specific obligations expressly assumed by it under the terms of the limited warranty. In no
event is EURO-PRO Operating LLC liable for incidental or consequential damages of any
nature whatsoever. Some states do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you. This warranty gives you specific
legal rights, and you may also have other rights which vary from state to state or province to
province.
W ater does not boil
‘On/Off’ light will not
illuminate when
depressed
1.
W ater has not cooled down
from desired temperature.
1.
Increase temperature
selection.
*Important: Carefully pack item to avoid damage in shipping. Be sure to include proof of
purchase date and to attach tag to item before packing with your name, complete address
and phone number with a note giving purchase information, model number and what you
believe is the problem with item. We recommend you insure the package (as damage in
shipping is not covered by your warranty). Mark the outside of your package “ATTENTION
CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the
specifications contained herein are subject to change without notice.
-----------------------------------------------------------------------------------------------------------------------
OWNERSHIP REGISTRATION CARD
FOR CANADIAN CONSUMERS ONLY
Please fill out and mail the product registration card within ten (10) days of purchase. The
registration will enable us to contact you in the unlikely event of a product safety notification. By
returning this card you acknowledge to have read and understood the instructions for use, and
warnings set forth in the accompanying instructions.
RETURN TO EURO-PRO OPERATING LLC, 4400 Bois Franc, St-Laurent, QC, H4S 1A7
EK119H
_________________________________________________________________________
Appliance model
_________________________________________________________________________
Date purchased
Name of store
_________________________________________________________________________
Owner’s name
_________________________________________________________________________
Address
City
State
Zip Code
7
Printed in China
8
Download from Www.Somanuals.com. All Manuals Search And Download.
|