Escient Stereo System Digital Music Manager User Manual

6640 Intech Blvd.  
Indianapolis, Indiana 46278, USA  
Document Number: M32003-01A2  
March 2007  
Quick Setup  
1. UNPACK YOUR NEW FIREBALL™ SEi  
• Unpack the FireBall, cables, and accessories (save the box).  
4. POWER UP!  
• Plug FireBall into an AC outlet.  
• Make note of the serial number (located on the back).  
• The Standby LED on the front of the FireBall will begin to flash RED during the power on cycle.  
When the LED turns solid RED, the FireBall is ready for use.  
SERIAL NUMBER: _________________________________________  
• Press the power button on the front panel or on the remote control.  
The LED will turn solid BLUE and video will be displayed on the Telly when the unit is on.  
2. CONNECT FIREBALL TO YOUR A/V SYSTEM  
• Locate the included composite video and analog audio cables.  
Note: You may have to press the "FB1" button on the remote to configure it to control FireBall.  
• Connect FireBall to any available A/V input on your receiver or Telly.  
Also be sure the Telly and receiver are turned on and set to the correct FireBall input.  
Note: You may use optional s-video or component video cables and optional digital audio cables  
5. QUICK START  
Use the remote control and follow the on-screen instructions.  
for the best picture and sound quality  
Note: The default video output mode is NTSC. Instructions for changing the video mode to PAL  
Composite or S-Video  
Video Out to the Telly or  
other display device  
are in the User's Guide.  
3. CONNECT FIREBALL TO THE INTERNET  
FireBall requires an Internet connection to identify the CDs played and recorded in the front panel  
drive, for playing Internet Radio stations, and for general system maintenance.  
Component Video Out  
to the Telly or other  
display device  
Optical Out to the  
receiver for digital audio  
RS-232 for external  
control or touch screen  
• Connect the included ethernet cable from  
FireBall's ethernet jack to your ethernet  
network.  
NOTE: You may need to purchase  
additional network hardware such as a  
"router". Please contact your Escient dealer  
for more information.  
Analog In from external  
analog audio source  
©2007 Escient. All rights reserved. Escient and the Escient logo are  
registered trademarks and FireBall and Physital are trademarks of Digital  
Networks North America, Inc. All other trademarks are property of their  
respective owners. Escient reserves the right to change product hardware,  
features and software without notice. Upon any change, materials are  
updated as quickly as possible, but may not be reflected in documents  
already distributed. Supported hardware is updated continually. If you wish to  
interface with hardware that is not listed on this data sheet, please call Escient  
at 800.372.4368.  
Ethernet Network Jack  
connects FireBall to your  
broadband Ethernet  
network.  
IR In for IR external  
control  
Power to electrical outlet  
Analog Out to the  
receiver for analog audio  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Euro Pro Carpet Cleaner S3306H User Manual
Everpure Water System 4K Plus User Manual
Fisher Price Motorized Toy Car 74260 User Manual
Friedrich Air Conditioner CP05C10 User Manual
Frymaster Fryer 8196203 User Manual
FujiFilm Photo Printer FL01712 100 User Manual
Gateway Personal Computer GM5478 User Manual
Generac Portable Generator 13694330200 User Manual
GE Oven PGS968 User Manual
Gigabyte Network Card GA 8I845GVM775 User Manual