WARNING! Do not expose the apparatus to dripping or splashing. Do not
•
Communicates with control devices via Ethernet 10/100 port and ZigBee
(a wireless standard for mesh-networking).
5. Static IP Modifications
place objects filled with liquids near the apparatus.
AVERTISSEMENT!N'exposez pas l'appareil à l'égoutture ou à
l'éclaboussement. Ne placez pas les objets remplis de liquides près de
l'appareil.
Backlighting feature turns on with any button push or Select Dial push and stays lit
for a preset time (default is 30 seconds).
This chapter describes, in general terms, how to set up physical connections
required for the Switch 16 Channel Audio and all associated devices. Refer to any
device-specific documentation for additional installation instructions.
WARNUNG! Setzen Sie den Apparat nicht Bratenfett oder dem Spritzen aus.
Setzen Sie nicht die Gegenstände, die mit Flüssigkeiten nahe dem Apparat
gefüllt werden.
About the Switch 16 Channel Audio
To set up the logical connections required, refer to Escient Composer Pro User
Guide software documentation.
WARNING! To reduce the risk of fire or electrical shock, do not expose this
apparatus to rain or moisture.
Front View
AVERTISSEMENT!Pour réduire le risque du feu ou de choc électrique,
n'exposez pas cet appareil à la pluie ou à l'humidité.
WARNUNG!Um das Risiko des Feuers oder des elektrischen Schlages zu
Connect Input and Output Devices
verringern, setzen Sie diesen Apparat nicht Regen oder Feuchtigkeit aus.
MS616A Switch 16 Channel
Audio
Installation and Setup Guide
WARNING! Equipment must be connected to a Mains socket outlet with a
1. Connect audio source devices (such as CD changers or players, tuners,
iPods, or tape players) you want included in the system to the audio in jacks.
2. Connect amplifiers or amplified speakers as needed to the audio out jacks.
protective earthing connection.
AVERTISSEMENT!L'équipement doit être relié à une sortie de douille de
forces à un raccordement de mise à la terre protecteur.
WARNUNG!Ausrüstung muss an einen Hauptleitungseinfaßungsanschluß
mit einem schützenden Erdunganschluß angeschlossen werden.
Connect to the Network and Power
1. If you are using an Ethernet connection for the Switch 16 Channel Audio, plug
the data cable from the home network connection into the Switch 16 Channel
Audio RJ-45 port (labeled Ethernet) and the network port in your wall or at the
network hub or switch.
Requirements and Specifications
Network Requirement: Ethernet or ZigBee 802.15.4 mesh network
1
2
3
1. Front Display—For displaying or setting audio switch settings and navigating
Technical Specifications
system menus
2. Connect the power cord provided to the back of the Switch 16 Channel Audio
and to the power outlet. Once the power cord is connected, the Switch 16
Channel Audio should power up.
2. Buttons—For choosing options or menus displayed in the front panel user
Table 1-1. MS616A Technical Specifications
interface
3. Select Dial—For scrolling through and selecting screen elements or options
Inputs
displayed in the LCD
# of Channels
16 L/R Stereo Pairs
RCA Jacks
10 kΩ typical
-14 dBV
Set Up Logical Connections
Physical and logical connections are required in order to control, navigate, and
use the Switch 16 Channel Audio as designed.
Back View
Input Connectors
Input Impedance
Nominal Input Level
Maximum Input Level
Thus far you have set up the physical connections for the Escient Switch 16
Channel Audio. To complete the logical setup, trained installers must use a PC
connected (and with Escient Composer software installed) to the home network. If
you are a trained Escient installer, refer to the Composer Help file.
Supported Models
This installation guide covers this Switch 16 Channel Audio model:
+4 dBV
• Europe: EFMS616A/N1B
• UK: EFMS616A/T1B
Outputs
Network Configuration
To set the network configuration:
# of Channels
16 L/R Stereo Pairs
RCA Jacks
50 Ω typical
-14 dBV
Output Connectors
Output Impedance
Nominal Output Level
Maximum Output Level
What’s in the Box
The following items are included in your Escient Switch 16 Channel Audio
2
1
3
4
1. At the In to Out Assignments screen, press the Network button.
2. On the Network Configuration screen, choose an Ethernet or ZigBee network
by rotating and pressing the Select Dial.
1. Power Plug Port—For standard IEC cord (included). Supports universal AC
input (100-240 VAC 50/60 Hz).
2. Ethernet—RJ-45 for a 10/100 Mb Ethernet connection
3. Audio In (Left-Right pairs) 1-16—RCA jacks for stereo channel input for up
to 16 stereo analog sources
•
•
•
Escient Matrix Switch 16 Channel Audio (MS616A)
IEC power cord
This manual
IMPORTANT! When making logical connections in Composer,
identify the device as the network type (Ethernet or Zigbee) that you
choose on the device network configuration. To avoid unexpected
behavior, do not identify the device as both network types.
+4 dBV
4. Audio Out (Left-Right pairs) 1-16—RCA jacks for stereo channel line output
for up to 16 amplifiers
Zone (Output) Control:
Available Gain
Treble
Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufac-
turer’s instructions.
Mute (-75 dB) to -40 to +8 dB
-12 to +12 dB, 2 dB steps, High Shelving EQ
-12 to +12 dB, 2 dB steps, Low Shelving EQ
L / R
IMPORTANT! En établissant les rapports logiques dans le
compositeur, identifiez le dispositif comme type de réseau (Ethernet
ou Zigbee) ce vous choisissent sur la configuration réseau de
dispositif. Pour éviter le comportement inattendu, n'identifiez pas le
dispositif en tant que les deux types de réseau.
Source Inputs
Each of the 16 signal sensing analog audio inputs (the RCA style ports) is labeled
1-16 for each individual source.
Bass
Balance
WICHTIG! Wenn Sie logische Beziehungen im Komponisten
herstellen, identifizierenen Sie die Vorrichtung als die Netzart
(Ethernet oder Zigbee) diese Sie wählen auf der
VorrichtungsNetzwerkkonfiguration. Um unerwartetes Verhalten zu
vermeiden, identifizierenen Sie die Vorrichtung nicht als beide
Netzarten.
Audio Outputs
The system automatically creates generic source names displayed in the front of
the device. To change these names, you must update your system using
supported system designing software (such as Composer Pro on a PC). For more
information, refer to the documentation that shipped with your Escient controller or
contact your professional installer or reseller.
Input Power Requirement:
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding-type
plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not fit into your out-
let, consult an electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11.Only use attachments/accessories specified by the manufacturer.
12.Use only with the cart, stand, tripod, bracket, or table specified by the manu-
facturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
13.Unplug this apparatus during lighting storms or when unused for long periods
of time.
Voltage
Frequency
Amps
100-240V~
50/60 Hz
3. If the switch is set to use a ZigBee network, the EUID, Gateway, and ZigBee
channel number are displayed. This screen has two menu options:
0.12/0.06 Amps
14.4 Watts
Front Display
•
•
Identify: When identifying the switch in Composer, press this button.
Back: Returns to the Network Configuration screen.
Watts
The best method of initially setting up system routing for the Switch 16 Channel
Audio is using Composer Pro software on a PC (for trained installers only). You
can also make adjustments from the front display.
4. If the switch is set to use an Ethernet network, the MAC address, method of
obtaining a network IP address, the device’s IP address, Subnet Mask, and
Gateway are displayed.
Additional Resources
The following resources are available:
The front display allows you to set or change audio source routing and change
zone settings for volume, bass, treble, and mute. The display also shows the
current source and zone activity.
The Switch 16 Channel Audio, by default, uses DHCP to obtain a network
IP address.
•
•
Your Escient-authorized reseller
Set Up the Switch 16 Channel Audio
This device operates as part of the Escient home system, which requires physical
and logical connections to function as designed.
14.Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as when a power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not oper-
ate normally, or has been dropped.
Features and Benefits
•
•
•
•
Switches up to 16 input sources to up to 16 simultaneous output zones.
Adjustable gain, treble, bass, and balance for each zone
Audio sensing on inputs
Device chassis is three standard rack units (RU) tall and rack mountable con-
forming to EIA 19” rack standards (13.3 cm x 44 cm x 35.6 cm)
Essential setup tasks include:
If the local area network does not support DHCP, you can configure the
switch to use a Static IP address instead:
Download from Www.Somanuals.com. All Manuals Search And Download.