Electro Voice Speaker ND6x 16 User Manual

ND6x-8/ND6x-16  
3-Inch High Frequency  
NeodymiumTransducer  
Key Features:  
Extremely high acoustic output  
Geometricallyoptimizedtitaniumdiaphragm  
Very high sensitivity and reliability  
500Hzminimumcrossoverfrequency  
Compact, ruggedandlightweight  
1.4" exit diameter  
2.0” exit diameter with ADH-6 adapter  
Die-castaluminumheatsink  
General Description:  
Technical Specifications:  
The Electro-Voice ND6x is a world-class high-frequency  
compression driver capable of extremely high acoustic output  
over a wide frequency range.  
ND6x-8  
ND6x-16  
16 ohms  
14 ohms  
10 ohms  
Nominal Impedance:  
Minimum Impedance: 7 ohms @ 6 kHz  
DC Resistance: 4.5 ohms  
Freq. Response: 500-20,000 Hz  
8 ohms  
Precise engineering, along with careful selection of materials  
and advanced driver architecture, has resulted in a driver  
that is ideally suited for the most demanding presentation of  
high quality music and communications program.  
Power Capacity: 50 Watts1, 100 Watts Cont. Prog.  
Recommended 500 Hz or higher  
Crossover :  
Incorporating Electro-Voice’s exclusive Ring Mode  
Decoupling (RMD) through all design phases has produced  
drivers with unmatched accuracy while minimizing acoustic  
resonances and time domain ringing throughout the driver  
structure.  
Nominal Efficiency: 28%  
Sound Pressure Level2 : 115 dB, HP4020 Horn  
(1 Watt @ 1 Meter) 113 dB, HP6040 Horn  
111 dB, HP9041 Horn  
The small size and weight-to-power ratio of the ND6x assures  
easy installations where weight may be a concern. The 2.15  
Tesla flux density provided by the Neodymium magnet  
exceeds that of conventional drivers at a fraction of the size.  
Throat Diameter: 1.38" (35mm)  
Voice Coil Diameter: 3" (75 mm)  
Voice Coil Wire: Pure Aluminum Ribbon  
Diaphragm Construction: 0.04 mm Pure Titanium Dome and  
Surround  
A unique, geometrically optimized 3" titanium diaphragm,  
consisting of a one-piece dome and suspension system gives  
these drivers an ideal combination of superb high-frequency  
response and resistance to fatigue.  
Electrical Connection: Screw Terminals (Accepts a pair of  
12GA Wires  
Polarity: Positive Voltage to Positive Terminal  
Produces a Positive Acoustic  
Pressure  
Integrated into the ND6x’s design is a finned aluminum  
heatsink to increase power handling and reliability.  
Flux Density: 2.15 Tesla  
Net Weight (each): 5.5 lbs (2.5 kg)  
Shipping Weight: 6.5 lbs (3.0 kg)  
The ND6x is recommended for all large horn installations  
where lower crossover points are required, such as cinema  
applications  
1 Power capacity per AES standard. Continuous pink noise, 500 - 5000 Hz with a 6 dB crest factor, 2 hours.  
2 Sound Pressure measured on axis in the far field with 1 Watt input of band-limited pink noise from 1000 - 5000 Hz  
and calculated to 1 Meter equivalent by inverse square law.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Electro Voice Microphone 660A User Manual
Electro Voice Speaker System Eliminator ii User Manual
Extron electronic Stereo Amplifier P 2 DA User Manual
FieldServer Computer Drive FS 8700 24 User Manual
Fisher Price Baby Jumper V0206 User Manual
Fisher Price Motorized Toy Car 74450 User Manual
GE Dishwasher GLD4408 User Manual
GE Mouse 98795 User Manual
GE Refrigerator 200D8074P039 User Manual
Gianni Industries Door EM 350 series User Manual