Electro Voice Speaker DX46 User Manual

Dx46  
FIR-DRIVE  
Sound System Processor  
Key Features:  
116 dB dynamic range  
2 analog inputs, 6 analog outputs  
2 digital AES/EBU inputs  
FIR-DRIVE  
TEMP limiter  
Configuration via IRIS-Net  
Technical Specifications:  
Mains Voltage 100 to 240 V AC, 50 to 60 Hz  
Power Consumption 25 W  
Analog Audio Inputs 2 XLR IN, electronically balanced  
2 x XLR THRU OUT, electronically  
balanced  
General Description:  
The Electro-Voice Dx46 is a digital sound system processor with 2 analog  
inputs, 2 digital AES/EBU inputs and 6 analog outputs. With high resolution  
FIR filters, sophisticated speaker protection and a multi level delay concept  
the Dx46 sets new standards for digital loudspaker processors. FIR-DRIVE  
provides highly detailed optimization of loudspeaker performance through  
the use of complex-phase FIR filters and advanced DSP settings. The con-  
figuration and operation of the device can be done via the front panel or the  
IRIS-Net software. For remote configuration and control the Dx46 can be  
connected via Ethernet or USB. The integrated 2 port ethernet switch allows  
daisy chain connection of devices. Direct-access buttons for editing DSP pa-  
rameters are available on the front panel. Up to 90 presets (60 factory pre-  
sets and 30 programmable user presets) can be used. The integrated FLASH  
memory allows software or preset update via Ethernet or USB. Five control  
inputs on the rear panel can be used for recall of presets using external  
switches or contacts. On the front panel level meters for input and output  
signals, output gain reduction, limit and clip LEDs, dedicated Mute buttons,  
output channel function indicators (SUB, LO, MID, HI) and a LCD display  
(192x32 pixesl) with blue backlight are available. There are 6 preconfigured  
configurations plus one free configurable full edit (2 in 6 out) configuration  
available. Three dedicated processing groups (user, array, speakers) are  
available. For each output 512-tap FIR filters can be used, the PEQ and GEQ  
use 48 Bit filter algorithms. A look-ahead Peak limiter and TEMP limiter  
(Thermal Energy Management and Protection) are available. The integrated  
Signal Generator allows internal generation of pink noise, white noise or sine  
signal. Every DSP parameter can be locked and / or hidden. The configura-  
tion of the ethernet port can be done via IRIS-Net device scan. Using 24 Bit  
AD/DA converters a dynamic range of 116 dB is reached. A switchable input  
PAD (-6 dB) can be activated. Configuration is done via IRIS-Net software,  
the visualization of the system transfer function is possible using Electro-  
Voice Speaker Settings. Please refer to the Dx46 owner‘s manual and IRIS-  
Net documentation for more details.  
Digital Audio Inputs 1 x XLR AES/EBU IN  
1 x XLR AES/EBU THRU OUT  
Digital Audio Format AES3, 32 kHz to 192 kHz sample rate  
Nominal Input Voltage 1.55 V / +6 dBu  
Maximum Input Voltage 17.3 V / +27 dBu  
(with -6dB PAD engaged)  
Input Impedance 10 kOhm  
Common Mode Rejection -85 dB @ 1 kHz (typical)  
A/D Conversion 24-Bit Sigma-Delta  
Analog Audio Outputs 6 x XLR OUT, electronically balanced  
Nominal Output Voltage 1.55 V / +6 dBu  
Maximum Output Voltage 8.7 V / +21 dBu  
Output Impedance 50 Ohm  
D/A Conversion 24-Bit Sigma-Delta  
Frequency Response 20 Hz to 22 kHz (+/-0.5 dB)  
THD+N < 0.002% (band limited 22 Hz to 22  
kHz)  
Dynamic Range 116 dB (A-weighted)  
USB USB Type B on front panel (PC Inter-  
face)  
Ethernet 2 x RJ-45 ports, 100 MB, Integrated  
Switch  
Control Port 1 x 6-pole Euro block  
Software Configurable for Preset  
Recall  
Sample Rate 48 kHz  
Data Format 24-Bit  
Internal Processing 48-Bit Double Precision  
Signal Processing Parametric EQs, 31 band Graphic  
EQs, Delays, Routing, X-Over, 512  
Taps FIR filters, PA limiter, TEMP limi-  
ter, Level, Polarity, Signal generator  
Operating Temperature Range 0 °C to 40 °C  
Dimensions (WxHxD) 19 x 13.9 x 1.72 inch (483 x 356.1 x  
43.6 mm)  
Weight (Net) 4.8 kg  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dx46  
FIR-DRIVE  
Sound System Processor  
DSP Signal Flow Chart:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimensions Drawings:  
Rear View:  
Dx46 Part Number:  
Dx46, 120 V -- F01U126855  
Dx46, 230 V -- F01U126854  
Agency Approvals  
CE  
FCC, IC  
CB  
U.S.A. and Canada only. For customer orders, contact Customer Service at:  
800/392-3497 Fax: 800/955-6831  
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:  
+ 49 9421-706 0 Fax: + 49 9421-706 265  
12000 Portland Avenue South, Burnsville, MN 55337  
Phone: 952/884-4051, Fax: 952/884-0043  
Other International locations. For customer orders, Contact Customer Service at:  
+ 1 952 884-4051 Fax: + 1 952 887-9212  
© Bosch Communications Systems 03/2010  
For warranty repair or service information, contact the Service Repair department at:  
800/685-2606  
Part Number F01U126854 Vs 01  
For technical assistance, contact Technical Support at: 866/78AUDIO  
Specifications subject to change without notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Exakta Digital Camera VX IIa User Manual
Extron electronic TV Converter Box II GX User Manual
Fisher Paykel Oven OB30 User Manual
Fisher Price Baby Toy T6200 User Manual
Franklin Industries LLC Refrigerator FCW100 User Manual
Friedrich Air Conditioner 115 Volts UE08 User Manual
Gefen Switch 8x1 DVI User Manual
Gemini CD Player CDJ 1200 User Manual
Gitzo Camcorder Accessories G1320 User Manual
Golden Technologies Mobility Aid GP52 User Manual