RAS106 & RAS108
User's
Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
C ONTENTS
1 INTRODUCTION
General Information
Features
1-1
1-2
1-3
1-4
1-5
1-6
Package Contents
Specifications
Connectors and Cables
Front & Rear Panel Description
2 INSTALLATION
Operating Environment
Connecting The Peripherals
Connecting The PCs
2-1
2-1
2-2
2-3
Connecting Power Adapter
3 OPERATION
PC Selection Method
Keyboard Hot Keys
Select Push Button
Reset Button
3-1
3-1
3-2
3-3
4 LEDS AND BUZZER
5 TROUBLE SHOOTING
4-1
5-1
APPENDIX Product Information
Product Information A-1
Download from Www.Somanuals.com. All Manuals Search And Download.
1-1 INTRODUCTION --
GENERAL INFORMATION
CHAPTER 1 I NTRODUCTION
General Information
Congratulations on your purchase of Edimax's 6-/8-port
Rackmount KVM Switch - RAS106 & RAS1088.
RAS106/108 are electronic keyboard/video/mouse (KVM)
Switches that controls up to 6 or 8 PCs using a single
keyboard, monitor, and mouse.
RAS106/108 KVM Switches can save you money by
eliminating redundant peripherals (e.g. keyboard, monitor,
and mouse) and provide a centralized control of multiple
PCs. With a small investment in Edimax's RAS106/108
KVM Switches you can preserve precious office space, cut
energy cost and redundant peripheral cost, and increase
productivity.
RAS106/108 KVM Switches feature standard 19" rackmount
size that fits into any industrial rack, PC99 compliant color-
coded connectors for easy correct cable connection,
individual intelligent mouse and keyboard emulation to
ensure successful PC boot up and flawless operation. Cap
Lock, Num Lock, and Scroll Lock status are recorded and
restored while switching among PCs. User can select PC by
using keyboard Hot Keys, front-panel select buttons or let
the RAS106/108 KVM Switches do the automatic scan.
Download from Www.Somanuals.com. All Manuals Search And Download.
1-2 INTRODUCTION --
FEATURES
Features
+ Easy Installation -- A truly plug and play device.
Complete installation within minutes with Edimax's
standard cable kits.
+ Smooth Control -- User can select any PC by keyboard
Hot Keys or push button.
+ Flawless Booting -- Individual keyboard and mouse
emulation to every PC.
+ Intelligent Keyboard Emulation -- Cap Lock, Num
Lock, and Scroll Lock status are recorded and restored
while switching among PCs.
+ 19" Rack Mount size -- Fit in any standard industrial
rack (mounting bracket included).
+ MS Intellimouse Support -- Provide Microsoft PS/2
Intellimouse and other name brand PS/2 mice emulation
to ensure proper wheel mouse function.
+ Wide Video Bandwidth -- Support monitor resolution up
to 1600 x 1280 (recommend maximum 70Hz when set
at 1600 x 1280).
+ Reset Button: Reset mouse and keyboard simulation
without power down the PCs.
+ Standard and color-coded connectors -- Use standard
PS/2 and VGA cables; PC99-compliant color-coded
connectors to ensure correct cable connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
1-3 INTRODUCTION -- PACKAGE
CONTENTS
Package Contents
One 6-/8-port KVM Switch (RAS106/108)
1
2
3
4
One external power adapter
One set of mounting brackets
One user's guide
1
3
2
4
Figure 1-1 Package Content
Download from Www.Somanuals.com. All Manuals Search And Download.
1-4 INTRODUCTION --
SPECIFICATIONS
Specifications
Model
Number of PC Ports
PC Selection Method
Push Button
RAS106
RAS108
6
8
Yes
Yes
Hot Keys
Yes
Yes
Automatic Scan
Maximum Resolution
Console Connectors
Keyboard (PS/2)
Mouse (PS/2)
Monitor
Yes
1600x1280
Yes
1600x1280
1 Mini-DIN6/Female
1 Mini-DIN6/Female
1 HDB15/Female
1 Mini-DIN6/Female
1 Mini-DIN6/Female
1 HDB15/Female
PC Port Connectors
Keyboard (PS/2)
Mouse (PS/2)
Monitor
6 Mini-DIN6/Female
6 Mini-DIN6/Female
6 HDB15/Male
8 Mini-DIN6/Female
8 Mini-DIN6/Female
8 HDB15/Male
READY LED
ACTIVE LED
SCAN LED
6
6
1
8
8
1
Scan Interval Time
Reset button
10 Seconds
1
10 Seconds
1
Maximum Cable Length
to Console
to Computers
Power
30 feet (5 meters)
60 feet (20 meters)
9VDC 500mA
30 feet (5 meters)
60 feet (20 meters)
9VDC 500mA
Net Weight
Dimension
Operating Environment
Emission
4.0 lbs.(1.8 Kg)
262x181x42 mm
5.5 lbs.(2.5 Kg)
370x248x42 mm
32-1310 F (0-550C) , 0%-90% RH
FCC Class B
FCC Class A
Download from Www.Somanuals.com. All Manuals Search And Download.
1-5 INTRODUCTION --
CONNECTORS AND CABLES
Connectors and Cables
Console Connectors
Three different types of console connectors are built on the rear
panel for connection to the keyboard, monitor, and mouse. Each
connector is represented by a picture and color-coded.
: PS/2 Keyboard (6-pin mini DIN, female; in purple)
: VGA Monitor (HDB15, female; in blue)
: PS/2 Mouse (6-pin mini DIN, female; in green)
PC Port Connectors
Sixe (RAS106) or Eight (RAS108) groups of connectors are built on
the real panel for connection to PCs using standard keyboard,
monitor and mouse cables. Each connector is represented by a
letter and color-coded.
K: PS/2 Keyboard (6-pin mini DIN, female; in purple)
V : VGA Monitor (HDB15, male; in blue)
M: PS/2 Mouse (6-pin mini DIN, female; in green)
Please refer to the "Specifications" in page 1-4 for details on
RAS106/RAS108's PC port connectors.
Cable Kits
Optional PS/2 cable kits of different lengths are available for
connection between RAS106/108 and PCs. Each cable kit consists
of one keyboard cable, one mouse cable and one monitor cable.
Refer to Appendix A page A-2 for detailed cable kit ordering
information.
Download from Www.Somanuals.com. All Manuals Search And Download.
1-6 INTRODUCTION -- FRONT& REAR
PANEL DESCRIPTION
Front & Real Panel Description
READY
ACTIVE
1
2
3
SCAN
4
6
5
8
7
RESET
POWER
RAS108 8-Port KVM Switc h
RAS108 Front Pa nel
Se le c t Buttons
M1 K1
M2
K2
M3 K3
M4 K4
M5 K5
M6 K6
M7 K7
M8 K8
RAS108 Re a r Pa nel
RAS106's front a nd re a r pa ne l la yout is sim ila r a s RAS108's.
Download from Www.Somanuals.com. All Manuals Search And Download.
2-1 INSTALLATION -- OPERATING ENVIRONMENT
& CONNECTING THE PERIPHERALS
CHAPTER 2 I NSTALLATION
Operating Environment
RAS106/108 must be installed and operated within the
limits of specified operating temperature and humidity (see
previous section under Specifications). Do not place object
on top of the unit. Do not position the unit near any heating
source such as heater, radiator, or direct exposure to sun.
Prevent entering of water and moisture into the unit. If
necessary, use dehumidifier to reduce humidity.
Connecting The Peripherals
Keyboard -- Connect one PS/2 keyboard to console
keyboard connector (purple one) located on the rear panel
of the unit.
Mouse -- Connect one PS/2 mouse to the PS/2 console
mouse connector (green one) located on the real panel of
the unit.
Do not use any serial to PS/2 adapter to connect the mouse to the
console mouse port.
RAS106/108 support 2-button and 3-button mice, 4-button or other
custom mice may not function properly or lose certain special
funcion.
Monitor -- Connect monitor to console monitor
connector (blue one) located on the rear panel of the unit.
Use only high resolution shielded monitor cable to ensure
quality video output.
Download from Www.Somanuals.com. All Manuals Search And Download.
2-2 INSTALLATION -- CONNECTING
THE PCS
Connecting The PCs
You may use any standard cables or use the cable kits
from Edimax to connect RAS106/108 and the PCs.
Make sure the cable connectors match the following:
PS/2 mouse cable: male to male, mini-DIN6
PS/2 keyboard cable: male to male, mini-DIN6
Monitor: male to female, HDB15
For monitor cables, Use only UL2919 compliant cable to
ensure the video signal quality.
It is strongly recommended to use high quality cable
kits from Edimax to simplify the installation and
ensure good quality connections. Please refer to
"Connectors and Cables" in page 1-5 and "Product
Information" in Appendix A page A-2 for detailed
cable kit information.
Connect one end of each of the three cables
(keyboard, mouse and monitor cable) to the
RAS106/108's PC ports and the other end to the PC.
Make sure all the cables are firmly plugged-in and
secured. Follow the same procedures to connect all
PCs.
Download from Www.Somanuals.com. All Manuals Search And Download.
2-3 INSTALLATION -- CONNECTING POWER
ADAPTER
Connecting Power Adapter
First remove the AC power adapter from the package.
Read the input voltage specification from the power
adapter and make sure it matches with your local power
voltage.
Connect the AC power adapter to the unit. Plug the AC
power adapter to your power outlet. Turn power on
using the toggle switch on the front panel and the
power LED shall be lit.
CAUTION: Plugging the AC power adapter to a power outlet
with different voltage may cause personal injuries and damages
to the power adapter.
Download from Www.Somanuals.com. All Manuals Search And Download.
3-1 OPERATION -- KEYBOARD HOT KEYS
CHAPTER 3 O PERATION
PC Selection Method
Three different PC selection methods are supported by
RAS106/108.
Keyboard Hot Keys -- Use pre-defined Hot Keys to
directly select PC.
Select Button - Switch PC or activate automatic
SCAN mode by using the select buttons on the front
panel.
Automatic Scan - Automatically scan all connected
and power-on PCs at a pre-set time interval.
CAUTION: Do not move the mouse or typing keyboard before the
RAS106/108 completes the channel switching. Fail to do so may
lock up your keyboard or mouse. See Chapter 5 "Trouble
Shooting" for further detail.
Keyboard Hot Keys
You can select a specific PC or activate the automatic
scan mode using the keyboard Hot Keys. The
keyboard Hot Keys provide an instant and convenient
way to control all your PCs.
All the Hot Key functions start with two "Scroll Lock"
key and followed with additional keys. A short beep
sound can be heard when you press "Scroll Lock" key
twice.
Download from Www.Somanuals.com. All Manuals Search And Download.
3-2 OPERATION -- PUSH BUTTON
1. To select a PC directly:
Scroll Lock Scroll Lock
PC#
<ENTER>
The "PC#" represents the PC number from 1 to 6 or 8.
The built-in buzzer will beep once to confirm the
switching. The ACTIVE LED will switch and identify
which PC is currently under control.
2. To activate Automatic SCAN mode:
Scroll Lock
Scroll Lock
<Space Bar>
A long beep sound to confirm the activation. The SCAN
will be lit to indicate the operation of SCAN mode.
3. To deactivate Automatic SCAN mode:
Press any key on the keyboard
A short beep sound to confirm the deactivation. The
SCAN LED will be turned off to indicate the end of
SCAN mode.
Select Push Button
1. To select a PC:
Push the SELECT button right below each PC number to
select that PC. The built-in buzzer will beep once to
confirm each PC switching. The ACTIVE LED will
switch and identify which PC is currently under
control.
Download from Www.Somanuals.com. All Manuals Search And Download.
3-3 OPERATION -- AUTO SCAN &
RESET BUTTON
2. To activate Automatic SCAN mode:
Push and immediately release the SCAN button right
below the SCAN LED to activate SCAN mode.
The built-in buzzer will beep to confirm the activation.
The SCAN LED will be lit to indicate the operation of
SCAN mode.
3. To deactivate Automatic SCAN mode:
Press any PC SELECT button or SCAN button.
The built-in buzzer will beep once to confirm the
deactivation. The SCAN LED will be turned off to
indicate the end of SCAN mode.
Reset Button
Press the Reset button will automatically reset the
RAS106/108 KVM Switc he s' keyboard and mouse
emulation processors. In normal operation, users do
not need to use the reset function. In case of losing
keyboard or mouse connection during operation, you
may press the Reset button to force the RAS106/108 to
re-initiate the emulation and re-establish the
connection.
Do not move the mouse or typing the keyboard during
the reset process. The built-in buzzer will sound a long
beep to confirm the activation of reset. The reset
process will be complete within three (3) seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
4-1 LEDS & BUZZER
CHAPTER 4 LEDS & B UZZER
LEDs
RAS106/108 LEDs are located in the front panel.
Please refer to the section of "Front & Real Panel
Description" under Chapter 1 "Introduction" for the
detail location of each LED.
READY LED: When a PC is properly connected and
the PC is powered on, the READY LED
corresponding to that PC will be lit.
ACTIVE LED: Indicate the currently selected PC.
Only one ACTIVE LED will be lit although more
than one computers are connected.
SCAN LED: LED is lit when RAS106/108 is
operating at automatic SCAN mode.
BUZZER
RAS106/108 has a built-in buzzer provide audio
confirmation of PC switch and activation/deactivation
of SCAN mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
5-1 TROUBLE SHOOTING
CHAPTER 5 TROUBLE SHOOTING
1. No screen display after the PC is powered on
or after PC switching
+ Press the PC SELECT button to switch to a port with PC
connected.
+ Make sure the external power adapter is plugged into the
power outlet and power switch is turned on.
+ Make sure the mouse and keyboard cables are not mis-
connected.
+ Make sure the monitor is firmly plugged into the console
connector.
+ Make sure the cables are firmly plugged into the PC port
connectors.
+ Try different video resolution by adjusting the setting of
the display controller card from the Windows control
panel.
2. Lose mouse control
+ Do not move the mouse during the switching. RAS106/108
can not switch the mouse control when it is still receiving
the mouse signals.
+ M ake sure the unit is not in SCAN mode.
+ Make sure the mouse is firmly plugged into the console
connector.
+ Make sure the cable is firmly plugged into the PC port
connector and the PC.
+ Try disabling touchpad if you are using a notebook
computer.
+ Restart your Windows 95, 98, NT, or 2000.
+ Press Reset button.
Download from Www.Somanuals.com. All Manuals Search And Download.
5-2 TROUBLE SHOOTING
3. Lose keyboard control
+ Do not type any key on the keyboard before the
channel is completely switched to new PC as indicated
by the change of display screen.
+ Make sure the keyboard is firmly plugged into the
console connector.
+ Make sure all the cables are firmly plugged into the PC
port connectors.
+ Try to switch to another channel and switch back.
+ Press Reset button.
4. Wheel mouse does not function properly
+ Make sure wheel mouse driver is installed on every
PC.
+ RAS106/108 supports only 2-button and 3-button
mouse such as Microsoft Intellimouse, Logitech
FirstMouse+ and MouseMan. Try different brand
wheel mouse.
+ Press Reset button.
5. Mouse and keyboard do not respond
instantly after PC switching
+ Do not move the mouse or typing keyboard before
RAS106/108 completes the PC switching. If
RAS106/108 detects mouse or keyboard signals input
from current PC before the switching is complete, it
will delay the PC switching until there's no more
signal input.
In such case, you will feel slight delay in the response
of mouse pointer or keyboard. Stop moving the mouse
or typing the keyboard, and RAS106/108 will complete
the switching immediately.
Download from Www.Somanuals.com. All Manuals Search And Download.
5-3 TROUBLE SHOOTING
6. Unable to switch PC
+ If you are using Hot Keys, make sure "Scroll Lock" key
is pressed twice, and you hear the confirmation beep and
followed by a valid digit number and "Enter" key.
+ If you are using push button, make sure push the center
of the button to accurately initiate the switching.
+ Do not move the mouse or typing keyboard before
RAS106/108 completes the switching. RAS106/108 will
not switch to selected PC until no more mouse or
keyboard signals are detected.
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX A-1 -- PRODUCT
INFORMATION
APPENDIX A PRODUCT I NFORMATION
Product Information
In addition to RAS106/108 KVM Switches, Edimax
offers a varities of KVM Switches. Following is a list of
different models and accessories. Check our web site
information.
I. Genie KVM Switch Series
MG2: 2-port PS/2 Mini KVM Switch w/cables
GENIE2-AP: 2-port KVM Switch AT & PS/2
GENIE4-P: 4-port KVM Switch PS/2
RAS106: 6-port KVM Switch PS/2, rackmount
RAS108: 8-port KVM Switch PS/2, rackmount
II. Cable Kits for Genie KVM Switches and
CPU Switch Series
CS-AT-6: 6-feet AT cable kit
CS-AT-10: 10-feet AT cable kit
CS-AT-25: 25-feet AT cable kit
CS-AT-50: 50-feet AT cable kit
CS-PS2-6: 6-feet PS/2 cable kit
CS-PS2-10: 10-feet PS/2 cable kit
CS-PS2-25: 25-feet PS/2 cable kit
CS-PS2-50: 50-feet PS/2 cable kit
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX A-2 -- PRODUCT
INFORMATION
PS/2 type cable kit:
! Keyboard - 6-pin Mini-DIN, male-to-male
! Mouse - 6-pin Mini-DIN, male-to-male
! Monitor - HDB15, male-to-female
AT type cable kit:
! Keyboard - 5-pin DIN, male-to-male
! Mouse - DB9, female-to-male
! Monitor - HDB15, male-to-female
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Support
To contact Edimax customer support
Web
FTP
ftp.edimax.com
Telephone
Fax
eMail
(408) 988-6092
(408) 980-1530
Customer Support Hours
9:00AM to 5:00PM, Monday through Friday, USA
Pacific Time.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|