Edelbrock Computer Drive 91147 User Manual

USB PORT TO SERIAL PORT ADAPTER CABLE  
For Use with Edelbrock QwikData or EFI Systems,  
As Well As Other Data Acquisition or EFI Systems  
Catalog #91147  
®
INSTALLATION INSTRUCTIONS  
PLEASE study these instructions carefully before beginning this installation. If you have any questions, please call our Technical Hotline at:  
1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or e-mail us at [email protected].  
DESCRIPTION: This is a USB to Serial communications adapter cable. It is used to convert a  
Laptop or PC USB port to a 9-pin RS232 serial communications connector. This item is included  
in all QwikData Data Acquisition and Edelbrock EFI kits. Software drivers are included on the  
supplied CD.  
KIT CONTENTS  
1 USB-to-Serial Adapter Cable  
SYSTEM REQUIREMENTS  
Hardware – A USB-enabled PC or Laptop  
®
Software – Microsoft Windows 98SE/ME/2000/XP  
INSTALLATION: The drivers for the USB-Serial Port adapter cable are located on the supplied CD.  
®
Microsoft Windows Installation  
Insert the disc into your CD-ROM drive and click on “Install USB-to-DB9” then follow the onscreen prompts.  
NOTE: You may use the same program to un-install the driver if desired. Run the “PL-2303 Driver Installer” program again and  
follow the prompts to un-install the driver.  
TROUBLESHOOTING: If the adapter is not communicating after installation of the driver, follow the troubleshooting suggestions below.  
Many serial devices will not operate on a COM port higher than 4. If the COM port is higher than 4, change it to a lower number using the Device  
Properties.  
To change the assigned COM number, go to the Start menu, click Control Panel then System. Select the Hardware tab and then Device Manager.  
Select the category “Ports (COM & LPT)” and right click the device “USB-to-Serial (COM x)” (Or a similar name. “X” represents the assigned COM  
number). Click the Port Settings tab, then the Advanced button. A box will be in the lower left corner to assign a different COM port to the adapter.  
NOTE: This procedure applies only to Windows 98SE, ME, 2000, and XP.  
Edelbrock Corporation • 2700 California St. • Torrance, CA 90503  
Tech Line: 1-800-416-8628 • E-Mail: [email protected]  
Catalog #91147  
Rev. 4/08 - AJ/mc  
©2008 Edelbrock Corporation  
Brochure #63-91147  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Euro Pro Electric Grill K4820H User Manual
FEIN Power Tools Welder MOtlx 6 25 User Manual
Fender Stereo System Micro ABY User Manual
Fisher Price Riding Toy N1366 User Manual
Ford Automobile Parts VMM User Manual
GCC Printers Printer Elite 12ppm User Manual
GE Air Conditioner AE0CD10AM User Manual
GE Microwave Oven HVM1540 User Manual
GE Water System 215C1044P010 3 User Manual
GN Netcom Headphones 405 FLEX SF User Manual