Simply
The
Most
Nova
Amazing
Subwoofer
I've
Ever
Tested.
Power From The Heavens
There
Might
Be
KOMPRESSOR
S-10 & S-12
Front Firing
Powered
Better
Subwoofers
On
The
Subwoofers
Operation
Manual
Planet,
But
I Haven't
Heard
Them.
&
Technical
Guide
For
The
Ultimate
In
Gut
Wrenching
Bass.
Earthquake Sound Corporation. 2727 Mc Cone Avenue, Hayward, CA 94545.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safe & Proper Handling Of Your Kompressor.
Unpacking Your Kompressor
The Kompressor subwoofer system weighs over 60 Lbs. It is
considerably heavy for an average person to carry or maneuver.
To prevent injuries, and eliminate any possible damage to your
Kompressor, we encourage you to employ the help of a friend
when unpackingthe unit;further we suggest the following:
Always wear a back support, and get someone to help you
carrying / lifting the subwoofer.
# 1. Always wear a back support belt when carrying / lifting the
Kompressor.
# 2. If possible, get someone to help you move the Kompressor
around.
# 3. Do not apply pressure or push against the face of the
speaker; this will cause irreparable damage to the cone and
suspension.
# 4. When carrying the Kompressor, make sure that the speaker
is on the other side, away from your chest (eliminating the
chance of pushingagainst the face ofthe speaker).
# 5. Do not drop the Kompressor, or subject it to sudden shocks.
This will damage the external finish and weaken the enclosure,
creating air leaks.
# 6. Avoid exposing the Kompressor to moisture. Water will
damage the wood structure as well as the amplifier and speakers.
# 7. Cleaning the Kompressor is best done using soft cloth; if
needed, use mild detergent with water. Like with any other
electrical unit, always unplug the Kompressor before cleaning
it.
Do not apply pressure or push against the face of the
speaker. When carrying the Kompressor, make sure the
speaker is on the other side away from your chest.
-4-
Download from Www.Somanuals.com. All Manuals Search And Download.
Kompressor Performance.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your Subwoofer
Lowlevel -RCA- audio input connection:
This is the best way to drive an audio signal into the Kompressor
subwoofer. Today, all signal processors(5.1/6.1 and more advanced ones)
come equipped with built-in pre-amplifier outputs (RCA) that include a
subwoofer output.
Generally, the SUB/OUT is in mono format. As shown in the
photos across, connect the SUB/OUT from the processor to the
Kompressor using a "Y" connector to feed both RCA inputs of the
subwoofer.
RCA connection from Processor to
a Kompressor using a "Y" connector.
We strongly recommend that you use the best available RCA
connectors and cables. High quality cables are normally triple shielded,
and the connectors are gold plated with forceful grasping (refer to
Earthquake line of accessories- SI superior Interconnect - at
www.earthquakesound.com).
High level audio input connection:
This is the least desired way to drive an
audio signal into the subwoofer. Older stereo systems
are not equipped with pre-amplifier audio outputs,
normally they come with stereo speaker outputs (left
& right).
Using "banana" plugs, connect the speaker
outputs to the corresponding Subwoofer high level
inputs (marked "FROM RECEIVER). In this
configuration, the front stereo speakers (towers) can
be powered up by connecting them to the subwoofer
speaker outputs (marked "TO SPEAKERS"). The
amount of power (watts) driven into the stereo
speakers (towers) is identical to the amount of power
(watts) fed into the SuperNova from the stereo system
(ratio 1:1).
AC power connection:
The SuperNova subwoofer is available in two models:
110V and 220V/24. The power socket if fused to protect the
amplifier from surges. Do not overfuse, replace the fuse with
identical value.
-6-
Download from Www.Somanuals.com. All Manuals Search And Download.
What Makes A Kompressor?
Class "A/B" Amp
* 200 watts class "AB" , high efficiency
power amplifier.
* 24 dB / Octave variable filter from 40
Hz to160 Hz.
* Automatic signal detection circuitry,
When "ON", it automatically turn on the
subwoofer when an audio signal is
detected. It also shuts the subwoofer off
after 30 minutes ifnosignal is detected.
*High level (speaker) audio inputs.
*Lowlevel (RCA) audio inputs.
* Full range speaker outputs that can be
used to power up other full range
speakers in the system.
XLT Drivers
Every component of the XLT driver is designed
for accurate reproduction of bass and sub-bass
frequencies. With a massive moving structure,
the XLT operates with extremely low distortion
and impressive transient response. Its
performance is attributed to a non-conventional
motor structure design, that integrates
components such as:
* Thick, high-gauss magnets, with a
total height of1.2 inches.
* Over 7 inch (D), epoxy coated super
spider. Chill-plated for long lasting linear
performance.
* 2.5" diameter, high temperature voice
coil, with 1,85" copper winding(height).
* 1.5" thick, single layer, thermally
pressed poly-ether foam surround.
The XLT
structure allows for extreme
excursions (19 to 21mm) without physical
deformation or running out of Reactive
Electromagnetic Coupling.
-7-
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up Your Subwoofer.
The Kompressor is a "true subwoofer, it must never be operated above the subharmonic / harmonic frequency range. The
Kompressor frequency response is limited by the built-in crossover (with an upper end of 160 Hz); however, in most applications,
the crossover should not be set above 80Hz to 95Hz. It is equipped with a fourth-order Linkwitz-Riley filter which will block
vocals from interfering with its performance.
When setting up the Kompressor as a part of a home audio system, users must understand that the subwoofer requires
different settings: one for music, and one for playing movie tracks. In order to set up the Kompressor for music, users must
recognize the frequency response of their existing speakers (tower & surround sound) and the limitations of these speakers, i.e. the
diameter (size) of the speakers and the SPL.
Crossover knob in 1 O'clock position - 85Hz @ -3dB.
+ 9.0
CROSSOVER
FREQUENCY
24dB/Oct
+ 8.0
+ 7.0
+ 6.0
+ 5.0
+ 4.0
+ 3.0
+ 2.0
+ 1.0
0.0
40Hz
160Hz
VOLUME
-1.0
-2.0
-3.0
-4.0
-5.0
-6.0
-7.0
-8.0
-9.0
10
20
30
40
50 60 70 80 90 100
200Hz
Crossover knob in 2 O'clock position - 90Hz @ -3dB.
+ 9.0
+ 8.0
+ 7.0
+ 6.0
+ 5.0
+ 4.0
+ 3.0
+ 2.0
+ 1.0
0.0
CROSSOVER
FREQUENCY
24dB/Oct
40Hz
160Hz
VOLUME
-1.0
-2.0
-3.0
For music setting:
-4.0
-5.0
1- Position the Kompressor in the corner of the living room.
2- Turn the unit around toexpose the controls .
-6.0
-7.0
-8.0
-9.0
3- Turn on your audio system, and switch your surround sound
processor to "MUSIC"mode, and equalize the rest of your audio system.
10
20
30
40
50 60 70 80 90 100
200Hz
4- Connect the Kompressor to the processor, usinghigh quality(triple shielded) RCAcables.
5- Set the crossover to 150Hz - maximum position, volume at minimum (0).
6- Gradually raise the main volume knob ( between the 10 O'clock to 2 O'clock) position, optimizing for the subwoofer
performance. That is when the Optical Compression Circuitry works best, allowing the amp maximum output with minimal
distortion.
7- With the crossover open to 160Hz, you will hear vocals coming out of the subwoofer. Gradually reduce the crossover point until
vocals are eliminated (typical crossing point of 80Hz).
To control the volume level of the Kompressor, use the surround sound processor output controls; do not use the main
volume knob on the Kompressor (keep it between 10 & 2 O'Clock position). Once you set up the proper mix of low frequencies
and subharmonic response, that does not encroach on the rest of the speakers. Now you are ready to set up the Kompressor for
home theater use.
For movie viewing:
The Kompressor can be set up to your liking. There are no rules of thumb to how much bass is required. Often, users like
to feel the overwhelming bass, it brings the actions and events closer to real life. When viewing movies, a 10dB gain above music
settingis often pleasant, it brings movie viewing close tolife.
If you desire to have a crossover setting for music, different than the setting for movie viewing. We suggest to cross the
Kompressor at higher frequencysetting, and use the processor tocontrol the desired lower crossing point.
-8-
Download from Www.Somanuals.com. All Manuals Search And Download.
Five (5) Years Limited Warranty.
Earthquake warrants the original purchaser that all Factory Sealed New Audio Products be free from defects in
material and workmanship, under normal and proper use, for a period of five (5) years from the date of purchase (as shown on
the original bill of sale with serial number affixed/written on it). The five (5) years warranty period is valid only if the product
is properly installed by an Earthquake authorized party, and the warranty registration card is properly filled out and sent to
Earthquake Sound Corporation. If the product is installed by a non-authorized party, a ninety (90) days warranty period
applies.
(A) Five (5) years limited warranty plan coverage guidelines:
-
First year: Earthquake pays for labor, parts, and ground freight (only in US mainland, not including Alaska and
Hawaii) back to customer.
-
-
Second year: Earthquake pays for labor and parts only, customer must pay freight both ways.
Third, fourth & fifth year: Earthquake pays labor only. Customer must pay for parts and freight both ways.
(B) Warning:
Products (sent for repair) that are tested by Earthquake technicians and deemed to have no problem, will not be
covered by the five (5) years limited warranty. Customer will be charged a minimum of one (1) hour of labor (ongoing rates)
plus shipping charges back to customer.
(C) Earthquake agrees to repair or replace - at our option - all such defective products/parts subject to the following
provisions:
-
-
Defective products/parts have not been altered or repaired by other than an Earthquake factory approved technician.
Products/parts are not subjected to negligence, misuse, improper use, or accident, damaged by improper line voltage,
used with incompatible products, or have its serial number or any part of it altered, defaced or removed, or have been
used in any way that is contrary to Earthquake's written instructions.
(D) Warranty Limitations:
Earthquake warranty does not cover products that have been modified or abused. Including but not limited to the following:
-
Damages to speaker cabinet and cabinet finish due to misuse, abuse, or use of improper use of cleaning
materials/methods.
-
-
-
-
-
-
Bent speaker frame, broken speaker connectors, holes in speaker cone, surround & dust cap, burnt speaker voice coil.
Fading, deterioration of speaker components & finish due to improper exposure to elements.
Bent amplifier casing, damaged finish on the casing due to abuse, misuse, or improper use of cleaning material.
Burnt tracers on PCB.
Product/part damaged due to poor packaging or abusive shipping conditions.
Subsequent damage to other products.
A warranty claim will not be valid if the warranty registration card is not properly filled & returned to Earthquake with a copy
of the sales invoice.
(E) Service Request:
To receive product/s service, contact Earthquake service department at (510) 732-1000 and request an RMA number
(Return Material Authorization), items shipped without a valid RMA number will be refused. Make sure you provide us with
your complete/correct shipping address, a valid phone number, and a brief description of the problem you are experiencing
with the product. In most cases, our technicians might be able to resolve the problem over the phone, thus eliminating the
need to ship the product.
(F) Shipping Instructions:
Product/s must be packaged in its original protective boxe/s to minimize transport damage. Shipper claims regarding
items damaged in transit must be presented to carrier. Earthquake Sound Corporation reserves the right to refuse product
improperly packed. Original bill of sale must accompany product returned for service. We encourage you to include with the
package a written description of the problem. Ship product to: Earthquake Sound Corp. 2727 Mc Cone Avenue, Hayward, CA
94545. Ph (510) 732-1000. You are responsible for the cost of shipping the product to Earthquake Sound Corporation.
(G) Disputes Resolution:
All disputes - between clients and Earthquake Sound Corporation - resulting from the five (5) years limited warranty
policy must be resolved according to the laws & regulations of the county of Alameda -California.
-9-
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty Registration Card.
Required Information:
First name:__________________________________________________________________________
Last name:__________________________________________________________________________
Street address:_______________________________________________________________________
___________________________________________________________________________________
City:_________________________________________State:_______________ Zip:______________
Phone number: (_______)______________________________________________________________
Model number:_______________________________________________________________________
Date of purchase:_____________________________________________________________________
Purchase price:_______________________________________________________________________
Serial number: _______________________________________________________________________
Dealer name:________________________________________________________________________
Dealer address:______________________________________________________________________
___________________________________________________________________________________
City:______________________________________ State:________________ Zip:_________________
Signature:____________________________________________________ Date:_________________
Voluntary information:
Birth date:_______________________________________ Married:__________ Single:____________
How did you learn about our product? _____________________________________________________
___________________________________________________________________________________
___________________________________________________________________________________
___________________________________________________________________________________
___________________________________________________________________________________
Your Comments: _____________________________________________________________________
___________________________________________________________________________________
____________________________________________________________________________________
Download from Www.Somanuals.com. All Manuals Search And Download.
From: _______________________
____________________________
____________________________
____________________________
Place
Stamp
Here
To: Earthquake Sound Corporation.
2727 Mc Cone Avenue,
Hayward, California 94545.
Ph (510) 732-1000.
5
YEARS
LIMITED
Hawaii)
WARRANTY
(Valid In U.S. Mainland Only- Excluding Alaska
&
Download from Www.Somanuals.com. All Manuals Search And Download.
|