TW-25S & TW-35S Installation Guide
Flush Mount Assembly
Flush Mount Complete assembly
Flush Mount Installation
Push assembled tweeter through cut out hole
Top Ring
Cut diameter: TW-25S=2” (50.8mm), TW-35S=3” (76.20mm)
Make sure that
the top ring and
bottom cup snap
when pushed
together
Fasten the panel
clamp down from
behind the panel.
Panel
Panel Clamp
Twist on nut
until the
Bottom Cup
tweeter is
secured
Angle Mount Assembly & Installation
Surface Mount Assembly & Installation
Earthquake has provided two (2)
mounting screws to be used in
the Angle and Surface options
Top Ring
Top Ring
Mounting screws
Panel
Bottom Cup
Bottom Cup
Panel
Download from Www.Somanuals.com. All Manuals Search And Download.
|