ETI Sound Systems INC Stereo Amplifier AT 212 User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
AT-212 100-WATT ALL-TUBE 2x12” COMBO!  
THANK YOU FOR CHOOSING THE B-52 PROFESSIONAL AT-212 COMBO! The B-52 AT-212 is a  
feature-laden all-tube 2 x 12” open-backed combo with 100 relentless watts ripping through two  
custom-built B-52 loudspeakers. The AT-212's foundation is outstanding tone, versatility and power.  
Each channel - Clean and Overdrive - has its own set of gain, treble, mid and bass equalization  
controls for maximum flexibility.  
The Clean Channel goes from classic sparkle to serious crunch while the Overdrive Channel  
features two independent gain options. Gain 1 moves from bluesy grit all the way to metallic shred.  
Gain 2 takes over where Gain 1 leaves off for the most intense gain ever.. The assignable contour  
control “scoops” the all important mids, effectively producing the ultimate metal tone or, when switched  
out, creates the warm, full bodied tones of the great classic amps. A three position rectifier switch  
adds even more versatility, offering Tube ClassAB1, Tube Class A and Solid State settings.  
The AT-212 also features solid Baltic birch construction,detachable casters and a four function  
heavy-duty footswitch.  
AT-212 TUBES  
Power Tubes:  
Preamp Tubes:  
Reverb Tube:  
Rectifier Tube:  
Effects Loop:  
Phase Inverter:  
4 x 6L6 / 5881  
4 x 12AX7  
1 x 12AX7  
1 x 5AR4  
1 x 12AX7  
1 x 12AX7  
CUSTOM B-52 TRANSDUCER  
Power Handling:  
120 watts  
Freq. Response:  
50-5K Hz  
Nominal Impedance: 16 Ohms  
Voice Coil Diameter: 2.5”  
HEARING DAMAGE, PROLONGED EXPOSURE TO EXCESSIVE SPL  
B-52 Professional amplifiers and speakers, including the AT-212, are capable of producing sound pressure levels (SPL) sufficient to cause  
permanent hearing damage to performers, production crews or people in the audience. Hearing protection devices such ear-plugs are rec-  
ommended. Caution should be taken to avoid extended SPL is excess of 90 dBA.  
AMPLIFIER MODULE PRECAUTIONS  
Do not attempt to service the AT-212 by yourself. Refer all servicing to a B-52 Stealth Series Authorized dealer. Service is required when  
the AT-212 has had liquid spilled on or inside the unit, has been damaged in any way, has been exposed to rain or moisture, does not oper-  
ate normally or has been dropped.  
WARNING – SHOCK HAZARD:  
To reduce the risk of fire or electrical shock, do not expose this unit to rain or moisture. Do not operate your AT-212 near a pool or other  
standing water. Make sure all blades on the polarized power plug are fully inserted into the power source. Ensure the power cord is not  
stretched, pinched or otherwise abused. Ensure the power cord is routed to avoid foot traffic. Your AT-212 amplifier should be cleaned only  
with a dry cloth.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
AT-212 - CONTROLS AND FEATURES  
1. LOW/HIGH INPUTS: Plug your guitar in here. Use the input that  
best suits your playing style. Most players use the High input for  
maximum gain. For a cleaner sound, use the Low input. Always  
use a high quality, shielded instrument cable.  
mid-range frequencies as desired in the overdrive channel.  
Similar to the Clean Channel function, the O.D. Channel Middle  
control adds body and punch to your sound.  
7. OVERDRIVE CHANNEL – TREBLE: Adjusts the amount of high  
frequency boost or cut as desired in the overdrive channel.  
Turning this control clockwise adds clarity to your sound.  
2. OVERDRIVE CHANNEL – GAIN 1: Adjusts the amount of  
distortion in Gain 1. (Activated LED indicates in use).  
3. OVERDRIVE CHANNEL – GAIN SWITCH: Push switch Selects 8. OVERDRIVE CHANNEL – GAIN SWITCH 1: Activates the  
between Gain 1 and Gain 2 controls. Activated LED lights  
indicate which channel is currently use.  
CONTOUR control for Gain 1.  
9. OVERDRIVE CHANNEL – CONTOUR: Varies the critical  
midrange tone in the overdrive channels. Adjusts from “classic”  
midrange punch to “scooped metal” madness.  
4. OVERDRIVE CHANNEL – GAIN 2: Adjusts the amount of  
distortion in Gain 1. (Activated LED indicates in use).  
5. OVERDRIVE CHANNEL – BASS: Adjusts the amount of low 10. OVERDRIVE CHANNEL – GAIN SWITCH 2: Activates the  
frequency boost or cut as desired in the overdrive channel. Bass  
CONTOUR control for Gain 2.  
is B-52’s signature. Turning this control clockwise increases 11. OVERDRIVE – VOLUME 1: Controls the overall volume of the  
depth and low-end punch to your music.  
medium gain overdrive channel.  
6. OVERDRIVE CHANNEL – MIDDLE: Adjusts the amount of 12. OVERDRIVE – VOLUME 2: Controls the overall volume of the  
high gain overdrive channel.  
WARNING: SHOCK HAZARD!  
13. CHANNEL SELECT: Push switch selects between the clean  
and overdrive channels. Activated LED lights indicate which  
channel is in use.  
To reduce the risk of fire or electrical shock, do not expose this unit to rain  
or moisture. Do not operate your AT-212 near a pool or other standing  
water. Make sure all blades on the polarized power plug are fully inserted  
into the power source. Ensure the powercord is not stretched, pinched or  
otherwise abused. Ensure the power cord is routed to avoid foot traffic.  
Your AT-212 amplifier should be cleaned only with a dry cloth.  
14. CLEAN CHANNEL - BASS: Adjusts the amount of low  
frequency boost or cut as desired. Adding bass will increase the  
depth and fullness of your sound.  
15. CLEAN CHANNEL - MIDDLE: Adjusts the amount of mid-range  
26. AC INLET & PRIMARY FUSE: Connects AC powercord and 29. GROUND / LIFT SWITCH: Removes ground from the circuit  
houses primary fuse.  
to eliminate 60-cycle hum.  
Always use correct value as indicated on amp panel chart.  
27. POWER TUBE FUSE: This fuse protects the AT-212 against  
circuit damage caused by a power tube failure. Only replace  
with a 1 AMP Fast Blo (never Slo Blo) fuse.  
30. LOUDSPEAKER OUTPUTS: Connects the AT-212 to the  
speaker cabinets such as the AT-412A or AT-412B.  
NOTE: Always be sure the speakers are plugged in before attempting to  
operate the amplifier. Always use  
a
high quality, heavy duty, unshielded  
speaker cable. Severe damage can occur from failing to connect the speakers  
and properly setting the impedance selector switch.  
28. 3-SETTING RECTIFIER SWITCH:  
SOLID-STATE – Gives tightest low-end definition and fastest attack.  
TUBE AB1 – Punchy, warm and tighter definition than Tube A.  
TUBE A – “Vintage” attack and feel. Warmest sounding setting.  
31. IMPEDANCE SELECTOR SWITCH: Allows the AT-212 to safely  
operate into any 4 ohm, 8 ohm or 16 ohm cabinets(s). NOTE:  
Always set the switch to match the impedance of your cabinet(s).  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
AT-212: CONTROLS AND FEATURES  
frequencies as desired in the clean channel. Turning the middle 22. PILOT JEWEL. Power on indicator.  
control clockwise will increase the amount of warmth in your 23. STANDBY ON/OFF SWITCH: Allows the AT-212 to remain  
tone. Counterclockwise settings create a more pristine, acoustic  
kind of sound.  
turned ON for limited periods of inactivity without the risk of  
damaging / over-heating the amplifier tubes. When the Standby  
switch is in the STANDBY position the AT-212 is in a non-  
operational setting. When in Standby the Sovtek tubes remain  
hot and ready for use. This bypasses the time required for the  
tubes to warm up before use. When the Standby switch is in the  
ON position the AT-212 is operational and should not be left  
inactive. DO NOT turn on the AT-212 or have the Standby  
switch set to ON without it connected to a loudspeaker.  
16. CLEAN CHANNEL - TREBLE: Adjusts the amount of high  
frequency boost or cut as desired in the clean channel. Treble  
adds brightness to your tone. Turning this control clockwise will  
add brilliance to your sound. Turning the control counter-  
clockwise softens the tone.  
17. CLEAN CHANNEL - BRIGHT: Adds high end sparkle.  
18. CLEAN CHANNEL – VOLUME: Controls the overall signal level  
of the clean channel.Adjusting the volume control enables you to 24. POWER ON/OFF SWITCH: Turns the AT-212 on and off.  
produce sparkling clean sounds to crunchy, dirty blues. Turned  
all the way to the left you will experience clean sounds. A setting  
all the way to the right will produce moderate levels of distortion.  
AMPLIFIER PRECAUTIONS  
19. MASTER VOLUME: Controls the overall signal level of the  
AT-212. To increase the overall signal and/or volume, rotate  
Do not attempt to service the AT-212 by yourself.  
Refer all servicing to a B-52 Authorized dealer.  
Service is required when the AT-212 has had liquid  
spilled on it or has been damaged in any way, the  
amplifier has been exposed to rain or moisture,  
does not operate normally or has been dropped.  
the control clockwise. The Master volume control allows you to  
preset the output levels of both the Clean and Overdrive Channels.  
20. MASTER LOW RESONANCE: Controls the overall resonance  
of the amplifier. Turning the control clockwise adds rich low end.  
21. MASTER REVERB CONTROL: Adjusts the amount of reverb  
produced by the amplifier. To increase the amount of reverb turn  
clockwise.  
32. LINE OUT LEVEL CONTROL: Controls the output capacity of 36. EFFECTS – RETURN JACK: Connects the AT-212 to the  
the Line Out Level. output of an effects unit.  
33. LINE OUT JACK: Connects the AT-212 to an external line- 37. EFFECTS – RETURN LEVEL: Controls the input capacity of  
level device such as a mixing board. the returning signal from an effects unit.  
34. FOOTSWITCH - EFFECTS/REVERB: Connects footswitch to 38. EFFECTS – SEND LEVEL: Controls the sending level output  
turn the reverb on/off and the effects loop on/off. to an effects unit.  
35. FOOTSWITCH – GAIN AND CHANNEL SWITCH: Switch 39. EFFECTS - SEND JACK: Connects to the AT-212 to the input  
between Gain 1 and Gain 2 in the overdrive Channel. Also  
switches between clean and overdrive channel.  
off an effects unit.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY  
Thank you for choosing a B-52 sound product. B-52 manufactures some of  
ty will automatically terminate 90 Days after the original retail sales date.  
This 90-Day warranty does not cover service or parts to repair damage  
caused by accident, disaster, misuse, abuse, over-powering, negligence,  
inadequate packing or shipping procedures and service, repair or modifica-  
tions of the amplifier which has not been authorized or approved by E.T.I..  
This warranty is in lieu of all other expressed warranties. If this product is  
defective in materials or workmanship as warranted above, your sole reme-  
dy shall be repair or replacement as provided above.  
the world’s best sounding and most reliable professional speaker systems,  
amplifiers and components. E.T.I. Sound Systems, Inc., makers of B-52, takes  
great pride in thoroughly testing each B-52 product prior to shipment.  
B-52 CABINETS: E.T.I. Sound Systems, Inc. offers a LIFETIME warranty  
(effective January 1, 2002) to the original purchaser that a B-52's cabinet  
construction will be free from defects in material and workmanship. A dated  
sales receipt will establish coverage under this warranty. This warranty does  
not cover service or parts to repair damage caused by neglect, abuse, nor-  
mal & wear and cosmetic appearance of the cabinetry not directly attributed  
to defects in material or workmanship, or service, repair, modifications of the  
cabinet, which has not been authorized or approved by E.T.I. If this product Authorized B-52 Dealer from whom you purchased the product or directly to  
is defective in materials or workmanship as warranted above, your sole rem-  
edy shall be repair or replacement as provided above.  
RETURN PROCEDURES: In the unlikely event that a defect should occur,  
follow the procedure outlined below. Defective products must be shipped,  
together with proof of purchase, freight pre-paid and insured to the  
E.T.I. Sound Systems. If a product must be returned to E.T.I. Sound Systems  
for warranty replacement/repair, a Return Authorization Number must be  
obtained from our Customer Service Department prior to shipping the prod-  
uct.  
LOUDSPEAKER AND MID-RANGE COMPONENTS: E.T.I. Sound  
Systems, Inc. warrants the original purchaser that B-52 loudspeakers and/or  
midrange components will be free from defects in material and workmanship  
for a period of (5) FIVE YEARS from the original purchase date (effective  
January 1, 2002). A dated sales receipt will establish coverage under this  
warranty. This warranty will automatically terminate (5) years after the origi-  
nal retail sales date. This (5) five-year warranty does not cover service or  
parts to repair damage caused by accident, disaster, misuse, abuse, burnt  
voice-coils, over-powering, negligence, inadequate packing or shipping pro-  
cedures and service, repair or modifications of the component which has not  
been authorized or approved by E.T.I.. This warranty is in lieu of all other  
expressed warranties. If this product is defective in materials or workman-  
ship as warranted above, your sole remedy shall be repair or replacement  
as provided above.  
__  
NEVER RETURN THE ENTIRE CABINET JUST THE DEFECTIVE COM-  
PONENT. Identify and remove the defective component. If you are uncertain  
which component is defective, or need directions for removing a component,  
please contact our Customer Service Department for assistance.  
Components which are a part of an original B-52 speaker box must be sent  
directly to E.T.I. Products must be shipped in the original packaging or its  
equivalent; in any case, the risk of loss or damage in transit is to be borne  
by the purchaser. The Return Authorization Number must appear in large  
print directly below the shipping address. Always include a brief description  
of the defect, along with your correct return address and telephone number.  
When calling to inquire about a returned product, always refer to the Return  
Authorization Number. If E.T.I. determines that the unit was defective in  
materials or workmanship at any time during the warranty period, E.T.I. has  
the option of repairing or replacing the product at no additional charge,  
except as set forth below. All replaced parts become a property of E.T.I.  
Products replaced or repaired under this warranty will be returned via  
ground-shipping-within the United States-freight prepaid. E.T.I. is not  
responsible for costs associated with expedited shipping, either to  
E.T.I. or the return of the product to the customer.  
HIGH-FREQUENCY DEVICES: E.T.I. Sound Systems, Inc. offers a LIFE-  
TIME warranty (effective January 1, 2002) to the original purchaser that  
B-52 high frequency (tweeters) devices will be free from defects in material  
and workmanship. A dated sales receipt will establish coverage under this  
warranty. This warranty does not warranty neglect or abuse. NO WARRAN-  
TY IS OFFERED ON HIGH-FREQUENCY DEVICES IN B-52 SYSTEMS  
WITH A BI-AMP SWITCH OPTION. The lifetime warranty on high-frequen-  
cy devices does not cover service or parts to repair damage caused by acci- INCIDENTAL OR CONSEQUENTIAL DAMAGE: In no event will E.T.I. be  
dent, disaster, misuse, abuse, negligence, inadequate packing or shipping  
procedures or service, repair or modifications of the product which has not  
been authorized or approved by E.T.I. This warranty is in lieu of all other  
expressed warranties. If this product is defective in materials or workman-  
ship as warranted above, your sole remedy shall be repair or replacement  
as provided above.  
liable for any incidental or consequential damages arising out of the use or  
inability to use of any B-52 product, even if E.T.I. or a B-52 dealer has been  
advised of the possibility of such damages, or any other claim by any other  
party. Some states do not allow the exclusion or limitation of consequential  
damages, so the above limitation and exclusion may not apply to you. This  
warranty gives you specific legal rights and you may also have other rights  
which may vary from state to state.  
GUITAR AMPLIFIERS: E.T.I. Sound Systems, Inc. warrants the original pur-  
chaser that B-52 guitar amplifiers will be free from defects in material and  
workmanship for a period of (5) FIVE YEARS from the original purchase date  
(effective January 1, 2002). A dated sales receipt will establish coverage  
under this warranty. This warranty will automatically terminate (5) years after  
FOR YOUR PROTECTION: Please complete and mail the Purchase  
Information Card within (10) ten days of the date of purchase so that we  
may contact you directly in the event a safety notification issued in accor-  
dance with the 1972 Consumer Product Safety Act. In addition, we ask that  
the original retail sales date. This (5) five-year warranty does not cover serv- you complete the brief questionnaire so me may analyze your answers and  
ice or parts to repair damage caused by accident, disaster, misuse, abuse, in this way, help us evaluate our customer needs.  
over-powering, negligence, inadequate packing or shipping procedures and  
service, repair or modifications of the amplifier which has not been author-  
CUSTOMER SERVICE: Our dedicated staff is ready to help you with any  
ized or approved by E.T.I.. This warranty is in lieu of all other expressed war- B-52 warranty or product questions you may have. Please call 323-277-4100  
ranties. If this product is defective in materials or workmanship as warranted  
above, your sole remedy shall be repair or replacement as provided above.  
(9:00AM to 4:00PM Pacific Standard Time, United States).  
GUITAR AMPLIFIER TUBES: E.T.I. Sound Systems, Inc. warrants the orig-  
inal purchaser that amplifier tubes used in B-52 Stealth Series All-Tube  
Amplifiers will be free from defects in material and workmanship for a period  
of 90 DAYS from the original date of purchase (effective January 1, 2002). A  
dated sales receipt will establish coverage under this warranty. This warran-  
E.T.I. Sound Systems, INC.  
3383 Gage Ave., Huntington Park, CA, 90255  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Edimax Technology Network Router AC M1000 User Manual
Eiki Projector LC NB3EU User Manual
Extron electronic Stereo Receiver WPD 110 A User Manual
Fellowes Car Stereo System C 380 User Manual
Ferris Industries Lawn Mower 5900621 User Manual
FieldServer Computer Drive FS 8700 97 User Manual
Five Star Ranges Range PN510 7BW User Manual
FujiFilm Digital Camera 16404791 User Manual
Gateway Computer Drive WBU 110 User Manual
Generac Power Systems Portable Generator 004917 3 User Manual