Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up Your LX-18A V2 Subwoofer
The B-52 Pro Audio speakers described in this instruction manual are intended for portable used in
which the speakers will be placed directly on the floor, stage or a solid platform. The LX-18A V2
and LX-18 V2 described in this manual should not be suspended or flown. These models are also
not intended for fixed installations outdoors or in high-moisture areas. Moisture can damage the
subwoofer and can cause corrosion of electrical contacts.
Keep speakers out of extended or intense direct sunlight. The subwoofer spider and surround will
prematurely dry out and finished surfaces may fade and be damaged by long-term exposure to
intense ultra-violet light.
B-52 Pro-Audio speakers, especially the LX-18A V2, can produce high-levels of energy. When
placed on slippery surfaces such as polished wood or smooth tiles, the speaker may move because
of its intense bass output. Precautions should be taken to ensure the subwoofer does not fall off a
stage or raised surface .
Hearing damage, prolonged exposure to excessive SPL
B-52 Pro-Audio speakers, especially the LX-18A V2 are capable of producing sound pressure lev-
els (SPL) sufficient to cause permanent hearing damage to performers, production crews or people
in the audience. Hearing-protection devices (ear-plugs) are recommended. Caution should be taken
to avoid extended exposure to SPL in excess of 90 dBA.
Amplifier Module Precautions
Do not attempt to service the LX-18A V2 by yourself. Refer all servicing to a B-52 Pro-Audio
Authorized dealer. Service is required when the LX-18A V2 has had liquid spilled on or inside the
subwoofer, objects have fallen onto the speaker or it has been damaged in any way, the speaker
has been exposed to rain or moisture, does not operate normally or has been dropped.
Keep your LX-18A V2 amplifier away from sources of heat such as a radiator or intense sunlight.
Do not cover your LX-18A V2 amplifier with material that may retain heat, such as a blanket or cur-
tain. Be certain that the vents on the panel of the amplifier are clear of all obstructions during oper-
ation.
WARNING – Shock Hazard:
To reduce the risk of fire or electrical shock, do not expose this unit to rain or moisture. Do not oper-
ate your LX-18A V2(S) near a pool or other standing water. Do not bypass or defeat the ground-
ing or polarization means used on the LX-18A V2 amplifier. Make sure all blades on the polarized
power plug are fully inserted into the power source. Ensure the power cord is not stretched, pinched
or otherwise abused. Ensure the power cord is routed to avoid foot traffic. Your LX-18A V2 ampli-
fier should be cleaned only with a dry cloth.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING TO KNOW YOUR
LX-18A V2 ACTIVE 18” SUBWOOFER
PANEL CONTROLS
11) Level Control: Sets the volume of the subwoofer
12) Phase Switch: Sets the polarity of the LX-18A V2.
13) Power Indicator: The Power indicator lights when the LX-18A V2 amplifier
has been turned on and has power.
14) Protection: Red LED turns on when distortion is audible in the
amplifier output. This indicates that you should turn the amplifier down.
15) Right & Left Inputs: These inputs are summed and sent to amplifier’s
Low Pass filter (120 Hz and below).
16) Right & Left Full-Range Outputs: Send stereo full-range signal
allowing daisy chaining of additional subwoofers. You do not need to
y-cable out of your mixer or audio device to get an additional full-range signal.
17) Right & Left High-Pass Outputs: Send stereo high-pass signal (120 Hz and
above) directly to active, full-range speakers or through a rack-mount amplifier
to passive speakers.
18) External Speaker On/Off Switch: Turns Speakon NL-4 connector (and external
subwoofer) on and off. When only using the LX-18A V2, turn this switch off.
When an external, non-powered subwoofer (LX-18 V2) is connected, turn this
switch on. NEVER turn switch on or off while amplifier is at full volume.
19) External Speaker Output: The Speakon NL-4 connector connects the amplifier
to an external, non-powered subwoofer (LX-18 V2). Either pins 1+ and 2+ can
be used as the positive connection. Either pins 1- or 2- can be used as the
Negative Connection. External subwoofer must be 8 Ohms
10) ON/OFF Switch: Turns the LX-18A V2 amplifier on or off. The LX-18A V2
will only turn on when the amplifier detects an audio signal.
11) Fuse Holder: Houses a fast-resetting 12 amp fuse.
12) Power Cord Connector: For attachment of the included power cord.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
LX-18A V2 DIGITAL AMPLIFIER
1
4
2
8
7
6
5
3
Full-Range
High-Pass
External
Speaker
Level
Protection
L
On
L
Off
Phase
Neutrik Pins:
1 + or 2 + = (+)
1 - or 2 - = (-)
180
0
R
R
Power
9
Outputs
Sub-Out
Input
-
B 52
N
Digital
Amplifier
LX-18AV2
Designed by ETI Sound Systems /
B-52 Pro Audio, Huntington Park, CA
Model: LX-18A. May be covered by
one or more patents pending.
ON
10
Power
OFF
Fuse
11
12 Amp
12
WARNING: To reduce the risk or fire or
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
electrical shock do not expose this equipment
to rain or moisture. Please read instructions
prior to operation.
MADE IN U.S.A.
120 V AC 60 Hz
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your LX-18A V2 To Active Full-Range Speakers
(As well as the LX-18V2 - Passive 18” subwoofer)
SP-1515 / ACT-1515
SP-1515 / ACT-1515
Active Full-Range Speakers
Active Full-Range Speakers
-
B 52
-
B 52
Audio
Input
R
L
-
-
B 52
B 52
High-P
Fe
External
Speaker
Level
P
On
Off
L
L
I
I
Phase
Neutrik Pins:
1
1
+
-
or
or
2
2
+
=
(+)
R
R
-
=
(-)
Sub-Out
Outputs
Input
-
B 52
E
I
.
Digital
Amplifier
LX-18A
Designed by ETI Sound Systems
/
B-52 Pro Audio, Huntington Park, CA
Model: LX-18A. May be covered by
one or more patents pending.
ON
Power
OFF
Note: To fully utlitize the LX-
18A V2 the connected passive
folded horn must be an LX-18
V2 because of Ohms rating.
Fuse
-
B 52
12 Amp
LX-18
WARNING: To reduce the risk or fire or
CAUTION
RISKOF ELECTRICSHOCK
DONOTOPEN
electrical shock do not expose this equipment
to rain or moisture. Please read instructions
prior to operation.
MADE IN U.S.A.
120
V
AC 60 Hz
B-52 LX-18
B-52 LX-18A
Connecting Your LX-18A V2 To Passive Full-Range Speakers
(As well as the LX-18V2 - Passive 18” subwoofer)
PA Series / SR-Series
PA Series / SR-Series
Passive Full-Range Speakers
Passive Full-Range Speakers
L
R
-
-
B 52
B 52
S
S
Rack-Mount Amplifier
-
B 52
-
B 52
L
R
-
-
B 52
B 52
R
L
I
I
External
Speaker
High-
Fnge
Level
Protection
On
Off
L
L
Phase
Neutrik Pins:
1
1
+
-
or
or
2
2
+
=
(+)
R
R
-
=
(-)
Sub-Out
Outputs
Input
-
B 52
.
.
I
N
Note: To fully utlitize the LX-
18A V2 the connected passive
folded horn must be an LX-18
V2 because of Ohms rating.
Digital
Amplifier
LX-18A
Designed by ETI Sound Systems
/
B-52 Pro Audio, Huntington Park, CA
Model: LX-18A. May be covered by
one or more patents pending.
ON
Power
OFF
Fuse
-
B 52
12 Amp
S
LX-18
WARNING: To reduce the risk or fire or
CAUTION
RISKOF ELECTRICSHOCK
DONOTOPEN
electrical shock do not expose this equipment
to rain or moisture. Please read instructions
prior to operation.
MADE IN U.S.A.
120
V
AC 60 Hz
B-52 LX-18
B-52 LX-18A
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Daisy-chaining your LX-18A V2 to Additional LX-18A V2 Subwoofers
(As well as the LX-18V2 - Passive 18” subwoofers)
-
-
B 52
B 52
External
Speaker
High-Pass
Full-Range
Level
Protection
On
Off
L
L
Phase
Neutrik Pins:
1
1
+
-
or
or
2
2
+
=
(+)
0
180
R
R
-
=
(-)
I
I
Sub-Out
Outputs
Input
-
B 52
.
I
N
Digital
Amplifier
LX-18A
Designed by ETI Sound Systems
/
B-52 Pro Audio, Huntington Park, CA
Model: LX-18A. May be covered by
one or more patents pending.
ON
Power
OFF
Fuse
-
B 52
12 Amp
LX-18
WARNING: To reduce the risk or firor
CAUTION
RISKOF ELECTRICSHOCK
DONOTOPEN
electrical shock do not expose this quipment
to rain or moisture. Please read insuctions
prior to operation.
MADE IN U.S.A.
120
V
AC 60 Hz
B-52 LX-18
B-52 LX-18A
R
L
-
-
B 52
B 52
External
Speaker
High-Pass
Full-Range
Level
I
I
On
Off
L
Phase
Neutrik Pins:
1
1
+
-
or
or
2
2
+
=
(+)
R
R
-
=
(-)
Sub-Out
Outputs
Input
-
B 52
.
I
N
Digital
Amplifier
LX-18A
Designed by ETI Sound Systems
/
B-52 Pro Audio, Huntington Park, CA
Model: LX-18A. May be covered by
one or more patents pending.
ON
Power
NOTE: To fully utlitize the
OFF
Fuse
LX-18A V2 the connected passive
folded horn must be an LX-18 V2
because of Ohms rating.
-
B 52
12 Amp
LX-18
WARNING: To reduce the risk or fire or
electrical shock do not expose this equipment
to rain or moisture. Please read instructions
prior to operation.
CAUTION
RISKOF ELECTRICSHOCK
DONOTOPEN
MADE IN U.S.A.
120
V
AC 60 Hz
B-52 LX-18
B-52 LX-18A
WARRANTY INFORMATION
Thank you for choosing this B-52 Pro-Audio sound product. B-52 manufactures some of the world’s best sounding and most reliable professional speaker systems and
components. E.T.I. Sound Systems, Inc., manufacturers of B-52, takes great pride in thoroughly testing each B-52 product prior to shipment. Please read the warranty
terms and conditions below and carefully read the provided Limited Warranty Card for additional terms and conditions.
LOUDSPEAKER & MID-RANGE COMPONENTS: E.T.I. Sound Systems, Inc. warrants the original purchaser that the B-52 subwoofer will be free from defects in material and work-
manship for a period of (5) FIVE YEARS from the original purchase date. A dated sales receipt will establish coverage under this warranty. This warranty will automat-
ically terminate (5) five years after the original sales date. See provided Limited Warranty Card for additional terms and conditions.
B-52 AMPLIFIER: E.T.I. Sound Systems, Inc. warrants the original purchaser that the B-52 amplifier will be free from defects in material and workmanship for a period of
(2) TWO YEARS from the original purchase date. A dated sales receipt will establish coverage under this warranty. This warranty will automatically terminate (2) two
years after the original sales date. If this product is defective in materials or workmanship as warranted above, your sole remedy shall be repair or replacement as pro-
vided above. See provided Limited Warranty Card for additional terms and conditions.
B-52 CABINETS: E.T.I. Sound Systems, Inc. offers a LIFETIME warranty to the original purchaser that B-52 cabinet’s construction will be free from defects in material and
workmanship. A dated sales receipt will establish coverage under this warranty. The warranty does not cover service or parts to repair damage caused by neglect, abuse,
normal wear & tear and cosmetic appearance of the cabinetry not directly attributed to defects in material or workmanship, or service & repair, modifications to the
cabinet which has not be authorized or approved by E.T.I. Sound Systems, Inc. If this product is defective in materials or workmanship as warranted above, your sole
remedy shall be repair or replacement as provided above. See provided Limited Warranty card for additional terms and conditions.
INCIDENTAL OR CONSEQUENTIAL DAMAGE: In no event E.T.I. Sound Systems, Inc. be liable for any incidental or consequential damages arising out of the use or inability to
use of any B-52 product, even if, E.T.I. Sound Systems, Inc. or a B-52 dealer has been advised of the possibility of such damages, or any other claim by any other party.
Some States do not allow the exclusion or limitation of consequential damages, so the above limitation and exclusion may not apply to you. This warranty gives you spe-
cific legal rights and you may also have other rights that may vary from State to State. See provided Limited Warranty card for additional terms and conditions.
RETURN PROCEDURES: In the unlikely event that a defect should occur, follow the procedure outlined below. Defective products must be shipped together with a proof of
purchase, freight prepaid and insured to the Authorized B-52 Dealer from whom you purchased the product or directly E.T.I. Sound Systems, Inc. If a product must be
returned directly to E.T.I. Sound Systems, Inc. for warranty replacement/repair, a Return Authorization Number (RAN) must be obtained from our Customer Service
Department prior to shipping the product. You may obtain RAN by calling 800-344-4ETI.
NEVER RETURN THE ENTIRE CABINET - JUST THE DEFECTIVE COMPONENT: See provided Limited Warranty card for additional terms and conditions.
FOR YOUR PROTECTION: Please complete and mail the Purchase Information Card within (10) ten days of the date of purchase so that we may contact you directly in the
event a safety notification is issued in accordance with the 1972 Consumer Product Safety Act. In addition, we ask that you complete the brief questionnaire so me may
analyze your answers and in this way, help us evaluate our customer needs. See provided Limited Warranty card for additional terms and conditions.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
E.T.I. SOUND SYSTEMS, INC.
3383 Gage Avenue, Huntington Park, CA, 90255
Phone: 323-277-4100 Fax: 323-277-4108
National: 1-800-344-4ETI
E-mail: [email protected]
8
Download from Www.Somanuals.com. All Manuals Search And Download.
|