22" LCD TV with DVD Player
DX-LTDVD22-09
USER GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Contents
CHILD SAFETY
It makes a difference how and where you use
your flat panel display
As you enjoy your new product, keep these
safety tips in mind
The issue
The home theater entertainment experience is a growing trend, and larger TVs are popular
purchases. However, TVs are not always supported on the proper stands or installed
according to the manufacturer’s recommendations. We and the consumer electronics
industry are committed to making home entertainment enjoyable and safe.
TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers,
chests, or carts may fall over and cause injury.
Tune into safety
•
•
•
•
•
One size of TV stand does not fit all. Use only a TV stand
rated for the weight of your TV.
Carefully read and understand all enclosed instructions for
proper use of this product.
Don’t let children to climb on or play with entertainment
system furniture and TVs.
Don’t place TVs on furniture that can easily be used as
steps, such as a chest of drawers.
Remember that children can become excited while watching
a program, especially on a “larger-than-life” TV. Make sure
that you place or install the TV where it cannot be pushed,
pulled over, or knocked down.
•
Make sure that you route all cords and cables so that they
cannot be pulled or grabbed by curious children.
Wall mounting
If you decide to wall mount your TV, always:
•
One size of wall mount does not fit all. Use only a wall mount rated for the weight of your
TV and that has been recommended by this TV manufacturer, listed in this manual, or
otherwise listed by an independent laboratory (such as UL, CSA, or ETL) as suitable for
your TV.
•
•
Follow all instructions supplied by the TV and wall mount manufacturers.
If you have any doubts about your ability to safely wall mount your TV, get help from a
professional installer.
•
Make sure that the wall where you are mounting the TV is
appropriate. Some wall mounts are not designed to be mounted
to walls backed with steel studs or cinder blocks. If you are
unsure, ask a professional installer.
•
TVs can be heavy. At least two people are required for safe wall mount installation.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Important safety instructions
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
CAUTION:TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
13) Unplug this apparatus during lightning storms or
Warning: To reduce the risk of electric shock, do not remove the cover or
back. No user serviceable parts inside. Refer servicing to qualified
service personnel.
when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
15) Apparatus should not be exposed to dripping or splashing, and
objects filled with liquids, such as vases, should not be placed on
the apparatus.
Warning: To reduce the risk of fire or electric shock, do not expose your TV
to rain or moisture.
Warning: To prevent electric shock, match the wide blade on the power
cord plug to the wide slot on an electric outlet. If the plug does not fit,
consult a licensed electrician to replace the obsolete outlet. Do not
modify the power cord plug, or you will defeat this safety feature.
This symbol indicates that dangerous
voltage constituting a risk of electric shock is
present within your TV. This label is located
on the back of your TV.
Location of the required marking
The rating sheet and the safety caution are on the rear of the unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
your TV.
Warning: Your TV contains a fluorescent lamp containing a small amount
of mercury. Disposal of these materials may be regulated for
environmental reasons. For disposal or recycling information, contact
your local authorities or the Electronic Industries Alliance at
CAUTION - Laser safety:
Certification: Complies with FDA radiation performance
standards, 21 CFR Subchapter J
This digital video player employs a laser system. To ensure proper use of
this product, please read this owner's manual carefully and retain for
future reference. Should the unit require maintenance, contact an
authorized service location-see service procedure.
Use of controls, adjustments or the performance of procedures other
than those specified herein may result in hazardous radiation exposure.
to prevent direct exposure to the laser beam, do not try to open the
enclosure. Radiation may be present when the enclosure is opened. Do
not stare into the beam.
Important safety instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Features
Left side
Features
Accessories
• Remote control
• AAA batteries (2)
• AC power cord
• User Guide
1
2
Note: Cables are not supplied. You can purchase cables at most electronics
8
stores.
Front
3
4
5
6
7
#
Component
Description
1
Press to eject the disc from the DVD
player.
EJECT
2
3
VOLUME + /–
In TV or DVD modes, press to increase
(+) or decrease (–) the volume.
In menu mode, press to navigate the
menus and select settings.
2
1
In TV mode, press to tune to the next
higher channel in the channel list. For
information about creating the
channel list, see “Memorizing
playback.
In menu mode, press to select a
menu.
CHANNEL
(PLAY)
/
#
Component
Description
1
Remote control
sensor
Receives signals from the remote
control. Do not block.
2
Power indicator LED Lights green when your TV is turned
on.
4
In TV mode, press to tune to the next
lower channel in the channel list. For
information about creating the
channel list, see “Memorizing
In menu mode, press to select a
menu.
CHANNEL
(STOP)
/
5
6
MENU
Press to open the on-screen menus.
INPUT/ENTER
In TV or DVD mode, press to select
the video input source.
In menu mode, press to confirm a
selection.
7
8
POWER
Press to turn your TV on or off.
Disc slot
Insert a disc in this slot to start
playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Features
Back
Remote control
19
1
20
21
22
VGA
2
3
23
24
25
2
4
5
6
1
VGA
4
6
3
5
7
9
8
7
26
27
8
9
28
30
32
34
36
#
Jack
Description
29
31
33
35
37
10
1
COMPONENT/
AUDIO IN
Connect the component output
cables (Y, Pb, Pr) and audio cables
(L/R) from an external AV source to
these jacks.
11
12
13
14
2
VIDEO (Composite)/ Connect the composite video output
S-VIDEO/AUDIO IN
cable (Video) or the S-video output
cable, and audio cables (L/R) from an
external AV source to these jacks.
15
16
17
18
38
3
4
5
AC INPUT
Plug the power cord into this socket.
Plug your headphones into this jack.
Headphone jack
VGA IN
Connect the VGA cable from a
computer to this port.
6
7
PC/DVI AUDIO IN
HDMI/DVI IN
Connect the audio output from a
computer or DVI source to this jack.
#
Button
Description
Connect an HDMI or DVI device to
this jack. To connect a DVI device, you
need to connect an HDMI-DVI cable,
and connect an audio cable to the
AUDIO IN L/R jacks.
1
2
3
TV
Press to change to TV mode.
Press to turn your TV on or off.
POWER
Numbers
Press to enter a channel number. If
you want to select a digital
sub-channel, press — to select the
sub-channel.
8
9
DIGITAL AUDIO OUT Connect a digital audio device to this
(COAXIAL)
jack.
RF (ANT) IN
Connect a TV antenna or cable TV
cable to this jack.
4
SETUP/TV MENU
In TV mode, press to open the menus.
In DVD mode, press to open the
initial setup mode.
5
6
7
Press to navigate in the on-screen
menu.
ENTER
EXIT
Press to confirm option settings in
the on-screen menu.
Press to exit the on-screen menus or
reset the information on a menu to
the previous settings.
8
Press to fast reverse DVD or CD
playback.
SEARCH
9
Press to pause playback of a disc.
PAUSE/STILL
SKIP
10
Press to skip back a chapter (DVD) or
track (CD).
11
SUBTITLE
Press to cycle through the available
subtitle languages on a DVD.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Setting up your TV
#
Button
Description
Setting up your TV
12
Press to slow reverse playback of a
DVD.
SLOW
Installing remote control batteries
13
14
RETURN
AUDIO
Press to exit the DVD setup menus.
To install remote control batteries:
1
Open the battery compartment.
Press to cycle through the languages
available on a DVD.
15
16
ZOOM
Press to zoom in the picture.
MARKER
Press to open a marker dialog box,
which lets you mark three scenes on
a DVD to access directly.
17
18
TITLE
In DVD mode, press to open the top
menu.
2
Insert two AAA batteries into the battery compartment. Make
sure that the + and – symbols on the batteries match the + and
– symbols in the battery compartment.
MENU
In DVD mode, press to open the DVD
setup menu.
19
20
DVD
Press to change to DVD mode.
INPUT
Press to open the Input Source Select
menu.
21
Press to eject the disc from the DVD
player.
EJECT
22
23
SLEEP
ZOOM
Press to set the sleep timer.
3
Close the battery compartment.
Press to open the Picture Size menu
where you can choose the size of the
picture.
24
25
–
Press to access TV digital
sub-channels.
DISPLAY
For TV or DVD, press to display
information about the TV program or
the DVD playing.
Notes:
Make sure that you match the + and – symbols on the batteries with the
26
27
28
RECALL
In TV mode, press to switch between
the current and last channel viewed.
symbols in the battery compartment.
Do not mix different types of batteries or old and new batteries.
If you do not intend to use the remote control for a extended period of
time, remove the batteries to prevent leakage.
Do not try to recharge batteries non-rechargable batteries. They may
overheat and rupture.
Press to begin playback of a DVD or
CD.
PLAY
Press to fast forward DVD or CD
playback.
SEARCH
29
30
In DVD mode, press to stop playback.
STOP
SKIP
Using the remote control
Press to skip forward a chapter (DVD)
or track (CD).
To use the remote control:
• Point the remote control directly at your TV, within a 60° angle
horizontally (30° to either side) and within 30° vertically of the
remote control sensor on the front of your TV, and within 15 feet
of your TV.
31
32
33
REPEAT
SLOW
A-B
Press to select the playback mode.
Press to slow the playback of a DVD.
Press to repeat a specific portion of a
DVD or CD. Press once to set the
beginning point, then press again to
set the end point.
34
35
36
37
38
ANGLE
Press to view a DVD from an alternate
angle (if available).
T.SEARCH
MUTE
Press to find a specific title, chapter,
or time on a DVD.
Press to mute the sound. Press again
to restore the sound.
VOL +/–
Press to increase (+) or decrease (-)
the volume.
Press to go to the next or previous
channel in the TV channel list.
CH
/
Approximately 15 feet
Caution
Do not expose the remote control to liquids, direct sunlight, or shock.
Notes
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Setting up your TV
Objects between the remote control and the remote control sensor may
block the remote control signal.
The range of the remote control may be diminished if direct sunlight or
other strong light is shining at the remote control sensor. In this case,
change the angle of the lighting, move your TV, or operate the remote
control closer to the remote control sensor.
To connect a combination VHF/UHF antenna with separate VHF and UHF
300 ohm twin-lead wires:
1
2
3
Connect the UHF 300 ohm twin-lead wire to the combiner (not
supplied).
Connect the VHF 300 ohm twin-lead wire to the 300-75 ohm
matching transformer.
Attach the transformer to the combiner, then attach the
combiner to the ANT. jack on the back of your TV.
Connecting the power
Notes:
Make sure to insert the cord securely at both the LCD TV and the power
Connecting a cable or satellite box
outlet.
Note: Installation methods may vary depending on the type of cable or
satellite box. Contact your cable or satellite provider for more
information.
The AC cord has a grounding-type AC line plug. If the supplied AC cord does
not match your AC outlet, contact a qualified electrician. Do not defeat
the purpose of a grounded plug.
To connect a cable or satellite box:
To connect power:
1
Connect a 75 ohm cable to the cable or satellite TV wall jack, then
connect the other end to the Antenna IN jack on the cable or
satellite TV box.
1
2
Plug the AC cord into the TV’s AC IN jack.
Connect the AC cord into an AC power outlet.
Coaxial cable
Coaxial cable
Cable or satellite box
Antenna jack
2
Connect a 75 ohm coaxial cable to the RF OUT jack on the cable
or satellite TV box, then connect the other end to the ANT. jack
on the back of your TV.
Warnings:
Do not connect this TV to power using any device other than the supplied
AC cord. This could cause fire, electrical shock, or damage.
Do not use with a voltage other than the power voltage displayed on the
marking label of the TV. This could cause fire, electrical shock, or
damage.
An alternate method
If you subscribe to a cable TV service in which basic channels are
unscrambled and premium channels require the use of a
converter/descrambler box, you may want to use a signal splitter and
an A/B switch box (available from the cable TV company or an
electronics supply store). Use the connections shown below. With the
switch in the “B” position you can directly tune any nonscrambled
channels on your TV. With the switch in the “A” position, tune your TV to
the output of the converter/descrambler box (usually channel 3 or 4)
and use the converter/descrambler box to tune scrambled channels.
Do not plug or unplug the plug when your hands are wet. This may cause
electrical shock.
Cautions:
When this TV is not used for a long time, (such as, away on a trip) in the
interest of safety, make sure that you unplug it from the AC outlet.
If you need to replace the supplied AC c cord, contact customer service.
Connecting an antenna or basic cable
To connect an antenna or basic cable (no cable box):
• Connect one end of a 75 ohm coaxial cable to the antenna or
basic cable wall jack, then connect the other end of the cable to
the ANT. jack on the back of your TV.
Cable or satellite box
Coaxial
cable
Coaxial
cable
A/B
switch
Splitter
Antenna jack
Coaxial cable
Antenna jack
Making audio and video connections
Connecting a composite video device
To connect a composite video device:
Antenna jack
300-75 ohm matching
transformer
1
Connect an AV cable to the VIDEO OUT jack on the external
device (such as a VCR), then connect the other end of the cable to
the VIDEO IN jack on the back of your TV.
Back of TV
VCR
Composite video cable
and audio L/R cables (not
provided)
Notes:
Always unplug the coaxial cable when you move your TV.
If you want to switch between antenna and cable, install an antenna
selector.
2
Connect an RCA audio cable to the AUDIO L and R jacks on the
video device, then connect the other end of the cable to the
audio portion of the AUDIO L (MONO) and R IN jacks on the back
of your TV.
If you need help connecting cable TV, contact your cable TV provider.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Setting up your TV
Notes:
Connecting a component video device
To connect a component video device:
When using HDMI/DVI to connect your HDMI or DVI devices, you must
select the corresponding audio input source (HDMI or DVI) on the
If you connect an external component (such as a cable box or satellite
1
Connect a component video cable to the COMPONENT VIDEO
OUT (Y, Pb, and Pr) jacks on the component device, then connect
the other end of the cable to the COMPONENT IN jacks on the
back of your TV.
receiver) to this LCD TV using an HDMI cable or a DVI-to-HDMI cable,
the image will not display if the output resolution of the component is
set to 480i. To receive the picture, you must change the output
resolution on the external component.
Back of TV
Component video device
Audio cables
(not provided)
If you need further instruction, contact the manufacturer of the external
Component video cable
(not provided)
Y
component.
P
B
P
R
Connecting a camcorder, game, or VCR
2
Connect an RCA audio cable to the AUDIO L and R jacks on the
component video device, then connect the other end of the cable
to the AUDIO L (MONO) and R jacks on the back of your TV. Make
sure that you connect the audio cable to the audio jacks
associated with the component jacks you connected the
component video cable to.
To connect a camcorder, game, or VCR:
1
Connect one end of a video cable to the VIDEO OUT jack on the
camcorder, game, or VCR, then connect the other end to the
VIDEO IN jack on the back of your TV.
Camcorder
Game
Note: Your TV accepts 480i, 480p, 720p, and 1080i video signals.
Video cable (not provided)
Audio cable (not provided)
or
Connecting an S-Video device
To connect an S-Video device:
2
Connect one end of an audio cable to the AUDIO OUT jacks on
the camcorder, camera, or VCR, then the other end of the cable to
AUDIO L/R IN jacks on the back of your TV. Make sure that you
connect the audio cable to the audio jacks associated with the
video jack you connected the video cable to.
1
Connect one end of an S-Video cable to the S-VIDEO OUT jack on
the S-Video device, then connect the other end of the cable to the
S-VIDEO IN jack on the back of your TV.
S-Video device
Back of TV
S-Video cable (not provided)
Audio cables (not provided)
Connecting a digital audio device
To connect a digital audio device:
• Connect one end of a digital audio coaxial cable to the DIGITAL
AUDIO IN jack on the audio device, then connect the other end of
the cable to the COAXIAL DIGITAL AUDIO OUTPUT jack on the
back of your TV.
2
Connect one end of an audio cable to the AUDIO OUT L/R jacks
on the S-Video device, then connect the other end of the cable to
the AUDIO L (MONO) and R jacks that are near the S-Video jack
you connected the S-Video cable to.
Coaxial digital audio
output jack
Note: If you connect an S-Video device and a standard video device to the
Back of TV
TV, the S-Video device has priority.
Right
front
speaker
VGA
Subwoofer
Connecting an HDMI or DVI device
Left
front
speaker
To connect an HDMI or DVI device:
TV/DVD
• Connect one end of an HDMI cable to the HDMI OUT jack on the
HDMI device, then connect the other end of the cable to the
HDMI/DVI IN jack on the back of your TV.
• When you connect to a DVI device with an HDMI-to-DVI adapter
cable, it transfers only video signal. Separate analog audio cords
required.
Coaxial digital
audio cable (not
provided)
To coaxial digital
audio input jack
Center
speaker
Right
rear
speaker
Left rear
speaker
Back of TV
VGA
Digital audio device
(with built-in digital
surround decoder)
HDMI cable (type A connector)
(not provided)
HDMI device
HDMI-to-DVI adapter cable (HDMI
type A connector) (not provided)
DVI device
Audio cable (not provided)
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Using your TV
Note: When your TV does not receive a signal and you do not press any
Connecting a computer
buttons for 15 minutes, your TV goes into Standby mode.
The TV can operate as the computer monitor.
3
Adjust the volume by pressing VOL+ or -. You can also press
MUTE to turn off the sound. The TV’s sound turns off and “Mute”
appears on the screen. The sound can be turned back on by
pressing this button again or the VOL + or –.
Set the signal type to the appropriate position (see “To select the
Select a channel by pressing CH or . The channel
automatically stops at the next channel set into memory. See
To connect a computer:
1
Connect one end of a VGA cable to the VGA jack on the computer,
then connect the other end of the cable to the VGA IN jack on the
back of your TV.
4
5
Back of TV
VGA
Computer
- OR -
Select a channel by pressing the number buttons (0-9). (If you
press only the channel number, channel selection is delayed for a
few seconds.)
Mini audio cable
VGA cable
To select analog channels:
• 1-9: Press 1-9 as needed. For example, to select channel 2,
press 2.
2
Connect one end of a mini-plug audio cable to the
AUDIO LINE OUT jack on the computer, then connect the other
end of the cable to the PC/DVI AUDIO IN jack on the back of your
TV.
Press INPUT SELECT on the remote control to select PC mode.
Turn on the computer.
To return to normal mode, press INPUT again and select another
mode.
Notes:
• 10-99: Press the two digits, in order. For example, to select
channel 12, press 1, 2.
• 100-125: Press the three digits, in order. Example, to select
channel 120, press 1, 2, 0.
To select digital channels:
Press the first three digits, then press the – button, followed by
the remaining number. For example, to select channel 015-001,
press 0, 1, 5, –, 0, 0, 1.
3
4
• If a channel with only audio content is selected, “Audio only”
is displayed on the screen.
The on-screen displays have a different appearance in PC mode than in TV
mode.
• If a channel with a weak digital signal is selected, “Digital
channel signal strength is low” is displayed on the screen.
• The same program may be available on either an analog
channel or a digital channel. You can choose to watch either
format.
If there is no video signal from the computer when the TV is in PC mode,
“No signal” appears on the TV screen.
Refresh
rate
Mode
Resolution
• If a channel to which you have not subscribed is selected,
“Digital channel is encrypted” is displayed on the screen.
VGA
640 × 480
720 × 400
800 × 600
1024 × 768
1280 × 768
1280 × 720
1360 × 768
60 Hz
70 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
VGA
Air
Cable
SVGA
XGA
VHF 2-13
VHF 2-13
UHF 14-69 STD/HRC/IRC
WXGA
WXGA
WXGA
14-36
37-59
60-85
86-94
95-99
(A) (W)
(AA) (WW)
(AAA) (ZZZ)
(86) (94)
(A-5) (A-1)
Note: This TV does not support Plug and Play connection to PC. Also, the
100-125 (100) (125)
PC may need to be set for proper resolution, based on above chart.
01
(5A)
Notes:
If a channel with no broadcast is selected, the sound is automatically
muted.
Using your TV
It may take a few seconds for a digital channel picture to appear on the
screen after being selected.
About the symbol
6
7
Select the video input source by pressing INPUT, then press or
or the corresponding number buttons (0-5), then press
ENTER. You can select TV, Video, Component, HDMI, PC, or
DVD, depending on which input jacks you used to connect your
devices and which devices are connected.
Press DISPLAY to display information about the program on the
screen.
• Digital information includes channel number, channel label
(if preset), broadcast program name, V-chip rating, signal
type, sleep timer, audio language, program guide, picture
size, and resolution. Analog information includes channel
The symbol may appear on your TV display during operation and
indicates that the function is not permitted by your player or specific
media.
Turning your TV on or off
To use your TV:
1
2
Press POWER.
Warning: When you press POWER to turn off your TV, your TV goes into
Standby mode. It is still receiving electrical power. To completely
disconnect power, unplug the power cord.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Using your TV
number, channel label (if preset), V-chip rating, signal type,
sleep timer, picture size, audio information (stereo or SAP),
and resolution.
4
Press SETUP/TV MENU. The initial on-screen menu opens.
Main Menu
Press DISPLAY again to clear the display, or wait a few seconds
and the TV returns to normal operation automatically.
Press RECALL to go back to the last channel you were watching,
and press RECALL again to return to the original channel.
Press SLEEP on the remote control to set the TV to turn off after a
specified interval. The interval increases with each press of the
SLEEP button (Off, 0h 5m, 0h 10m, 0h 15m, 0h 30m,..., 4h
0m). After the sleep timer is programmed, the display appears
briefly to remind you that the sleep timer is operating. To confirm
the sleep timer setting, press SLEEP and the remaining time is
displayed for a few seconds. To cancel the sleep timer, press
SLEEP repeatedly until the display turns to Off..
Picture
Audio
8
9
>>
Channel
Lock
Setup
ENTER :Set
: Select
5
6
Press or to select Channel, then press or ENTER.
Press or to select Auto Ch Memory, then press or
ENTER. The Auto Ch Memory menu opens.
Setting up for the first time
Auto Ch Memory
The first time you turn on your TV, you need to select a language for the
on-screen menus and scan for available channels.
Signal Type
Automatic Search
Cable
Start
Setting the on-screen language
To set the on-screen language:
1
Make sure that your TV is plugged in and connected to an
antenna, cable TV, or satellite TV.
2
Press POWER. You may have to wait a few seconds for your TV to
initialize.
3
4
5
Press TV to select TV mode.
Press SETUP/TV MENU. The initial on-screen menu opens.
Press or to select Setup, then press or ENTER. The Setup
menu opens.
: Adjust
: Select
7
8
Press or to highlight Signal Type, then press or to
select Air or Cable.
Press EXIT to return to normal viewing.
Setup
To automatically scan for and memorize channels:
1
Make sure that your TV is plugged in and connected to an
antenna, cable TV, or satellite TV.
Press POWER. You may have to wait a few seconds for your TV to
Closed Caption
Language
Video Label
Backlight
>>
English
>>
2
initialize.
16
3
4
Press TV to select TV mode.
Press SETUP/TV MENU. The initial on-screen menu opens.
Auto Shut Off
Reset
Off
>>
Main Menu
: Adjust
: Select
Picture
Audio
Note: When you press SETUP/TV MENU the first time after purchasing
this TV, the above screen opens automatically.
>>
Channel
Lock
6
7
Press or to select Language.
Press or to select English, French (Français), or Spanish
(Español).
Setup
8
Press EXIT/CANCEL to return to normal viewing.
Memorizing channels
ENTER :Set
: Select
This TV is equipped with a channel memory feature which lets you skip
up or down to the next channel set into memory. Before selecting
channels in this manner, they must be programmed into the TV’s
memory. To use this TV with an antenna, set the Signal Type option to
the Air mode. When shipped from the factory, this menu option is in
the Cable mode.
5
Press or to select Channel, then press or ENTER.
To select the signal type:
1
2
3
Make sure that your TV is plugged in and connected to an
antenna, cable TV, or satellite TV.
Press POWER. You may have to wait a few seconds for your TV to
initialize.
Press TV to select TV mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Using your TV
6
Press or to select Auto Ch Memory, then press or
ENTER. The Auto Ch Memory menu opens.
4
Press or to select Add/Delete, then press or ENTER. The
Add/Delete menu opens.
Auto Ch Memory
Add/Delete
Signal Type
Automatic Search
Cable
Stop
Adding Channel
Add/Delete
Clear All
>>
>>
>>
Analog Channel Found : 16
Digital Channel Found : 0
ENTER:Cancel
: Select
: Select
ENTER:Set
7
Press or to highlight Automatic Search, then press or
ENTER.
The TV begins memorizing all of the channels available in your
area. It may take about 5 minutes to complete memorizing
digital cable channels. Depending on the reception condition, a
bar display may not advance for several minutes.
5
6
Press or to highlight Adding Channel, then press or
ENTER. The new channel is added to the channel memory.
Press EXIT to return to normal viewing.
Deleting channels
You can select a channel that you want to delete from the channel list.
To delete a channel from the channel list:
Notes:
1
Press SETUP/TV MENU. The initial on-screen menu opens.
Memorizing channels is best accomplished during evening “Primetime”
hours, because more stations are broadcasting digital signals at that
time. Channel memorization can only be accomplished while a station
is broadcasting a digital signal.
If you are unsure of the digital channels available in your area, you can
Zip code.
New digital channels may be added to your area periodically. We
recommend that you perform the “Automatic Search” procedure
regularly.
Main Menu
Picture
Audio
>>
Channel
Lock
Setup
All channel labels are cleared when you automatically scan for channels.
Adding channels
ENTER :Set
: Select
If you find a new digital channel you like, you can add it to the channel
memory.
2
3
Press or to select Channel, then press or ENTER.
Press or to select Add/Delete, then press or ENTER. The
To add a new channel to memory:
1
2
In TV mode, tune to the new channel.
Press SETUP/TV MENU. The initial on-screen menu opens.
Add/Delete menu opens.
Add/Delete
Main Menu
Adding Channel
Add/Delete
Clear All
>>
>>
>>
Picture
Audio
>>
Channel
Lock
Setup
: Select
ENTER:Set
ENTER :Set
: Select
3
Press or to select Channel, then press or ENTER.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Changing the TV settings
4
Press or to highlight Add/Delete, then press or ENTER.
Changing the TV settings
Labeling the channels
The Add/Delete menu opens.
Add/Delete
Channel labels appear with the channel number display each time you
turn on the TV, select a channel, or press DISPLAY. You can choose any
four characters to identify a channel.
CH
Signal
2
3
Analog
Analog
Digital
Digital
Analog
Add
Add
To label a channel:
1
Press SETUP/TV MENU. The initial on-screen menu opens.
3-001
3-002
4
Delete
Add
Main Menu
Delete
Picture
Audio
: Adjust
: Select
>>
Channel
Lock
5
Press or to select the channel you want to delete, then
press or to select Delete.
Setup
6
7
Repeat Steps 4 and 5 to select other channels you want to delete.
Press EXIT to return to normal viewing.
ENTER :Set
: Select
Deleting all channels from channel memory
You can delete all channels from the channel list.
To delete all channels from the channel list:
2
3
Press or to select Channel, then press or ENTER.
Press or to select Ch Label, then press or ENTER.
1
Press SETUP/TV MENU. The initial on-screen menu opens.
The Ch Label menu opens.
Main Menu
Ch Label
Picture
Audio
Channel Number
Ch Label
15-1
>>
>>
Channel
Lock
Label Clear
Setup
ENTER :Set
: Select
: Adjust
: Select
2
3
Press or to select Channel, then press or ENTER.
Press or to select Add/Delete, then press or ENTER.
The Add/Delete menu opens.
4
Press or to select the channel you want to label, then
press
.
Ch Label
Add/Delete
Channel Number
Ch Label
15-1
A
Adding Channel
Add/Delete
Clear All
>>
>>
>>
Label Clear
>>
: Adjust
ENTER:Set
: Select
: Select
ENTER:Set
5
6
7
8
Press or repeatedly until the first character of the channel
4
5
Press or to highlight Clear All, then press or ENTER.
label you want appears in the first space, then press ENTER.
All channels are cleared from channel memory.
Repeat Step 5 until you have entered all four characters of the
channel label.
When you finish entering the channel label, press EXIT to return
to normal viewing.
Repeat Steps 4 through 7 for any additional channels you want to
label. You can label all memorized channels.
Press EXIT to return to normal viewing.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Changing the TV settings
To delete a channel label:
Labeling video inputs
1
Press SETUP/TV MENU. The initial on-screen menu opens.
To label video inputs:
Main Menu
1
Press SETUP/TV MENU. The initial on-screen menu opens.
Picture
Audio
Main Menu
Picture
Audio
Channel
Lock
>>
Channel
Lock
Setup
>>
Setup
ENTER :Set
: Select
2
3
Press or to select Channel, then press or ENTER.
Press or to select Ch Label, then press or ENTER.
The Ch Label menu opens.
ENTER :Set
: Select
2
Press or to select Setup, then press or ENTER.
The Setup menu opens.
Ch Label
Setup
Channel Number
Ch Label
15-1
>>
Closed Caption
Language
Video Label
Backlight
>>
English
>>
Label Clear
16
Auto Shut Off
Reset
Off
>>
: Adjust
: Select
: Select
ENTER : Set
4
Press or to select the channel from which you want to
delete the label, then press . The Ch Label menu opens.
3
Press or to select Video Label, then press or ENTER.
The Video Label menu opens.
Ch Label
Video Label
Channel Number
Ch Label
15-1
A
Video
-
Component
HDMI
-
Label Clear
>>
-
ENTER:Set
: Select
: Adjust
: Select
5
6
Press or to highlight Label Clear, then press or ENTER.
4
5
Press or to select the input which you want to label.
Press or to select the label you want for that input.
Options include:
The channel label is deleted.
When you finish deleting the channel label, press EXIT to return
to normal viewing.
• VCR—Video cassette recorder
• DVD—DVD video
• DTV—Digital TV set-top box
• SAT—Satellite box
• CBL—Cable box
• HD—HDMI device (only for HDMI inputs)
When you finish labeling the video input, press EXIT to return to
normal viewing.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Changing the TV settings
5
Press or to select TV Rating or Movie Rating, then press
or ENTER.
If you are setting the TV Rating, the following screen opens:
Setting parental controls (V-chip)
You can set an age limitation on your TV to restrict children from
viewing or hearing violent scenes or pictures that you choose to
exclude. The restriction applies to “TV Rating” and “Movie Rating,” if
this data is transmitted. You may set this restriction separately. To use
the V-chip feature, you must set and use a password.
To set a password:
TV Rating
ALL
D
L
S
V
FV
TV-Y
1
Press SETUP/TV MENU. The initial on-screen menu opens.
TV-Y7
TV-G
Main Menu
TV-PG
TV-14
TV-MA
Picture
Audio
Channel
ENTER:Set
: Select
>>
Lock
Set the following TV ratings based on the age:
Setup
• TV-Y—All children
• TV-Y7—7 years old and above
• TV-G—General audiences
• TV-PG—Parental guidance suggested
• TV-14—14 years old and above
• TV-MA—17 years old and above
Set the following TV ratings based on genre:
ENTER :Set
: Select
2
Press or to select Lock, then press or ENTER. The
Password screen opens.
• ALL—All
Lock
• D—Dialogue
• L—Language
Password
* * * *
• S—Sex
• V—Violence
• FV—Fantasy Violence
6
If you are setting the Movie Rating, the following screen opens:
Movie Rating
G
[0-9] : Select
ENTER:Set
PG
PG-13
R
3
4
Select and enter your password using the number buttons (0-9),
then press ENTER. Asterisks (*) appear on the screen instead of
the numbers you enter.
When the confirmation screen opens, re-enter the same
password, then press ENTER again. Your password is now set.
NC-17
X
Notes:
: Select
ENTER:Set
If you forget the password, contact Customer Service for assistance.
Your original remote control will be required. To avoid forgetting the
password, write it down and keep in a safe place.
Set the following movie ratings based on the age:
• G—All ages
• PG—Parental guidance
To set the parental controls (V-Chip):
1
Press SETUP/TV MENU. The initial on-screen menu opens.
• PG-13—Parental guidance for children under 13 years old
• R—Parental guidance for children under 17 years old
• NC-17—17 years old and above
• X—Adults only
Main Menu
Picture
7
8
Press
,
,
, or to select the desired rating, then press
Audio
Channel
Lock
ENTER.
Press EXIT to return to normal viewing.
>>
When a program is received that is blocked by the V-Chip, press
MUTE, then enter your password. The protection is temporarily
be overridden. If the TV is turned off or the channel is changed,
the V-chip restriction will be reactivated.
Setup
Note:
ENTER :Set
: Select
The V-chip feature is activated only on programs and input sources that
2
3
4
Press or to select Lock, then press or ENTER. The
Password screen opens.
Enter your password using the number buttons (0-9), then press
ENTER. The Lock menu opens.
Press or to select V-Chip Set, then press or to select
ON.
include a rating signal.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Changing the TV settings
To change your password:
2
Press or to select Lock, then press or ENTER. The
Password screen opens.
1
Press SETUP/TV MENU. The initial on-screen menu opens.
Lock
Main Menu
Password
Picture
Audio
* * * *
Channel
>>
Lock
Setup
[0-9] : Select
ENTER:Set
ENTER :Set
: Select
3
4
Enter your password using the number buttons (0-9), then press
ENTER. The Lock menu opens.
Press or to select V-Chip Set (DTV), then press or
ENTER. If your TV does not have the new rating system, it begins
downloading the new rating system. This may take several
minutes to complete.
2
Press or to select Lock, then press or ENTER. The
Password screen opens.
Lock
Password
* * * *
5
Set your preferred level of control using the new rating system.
Notes:
You can only download the additional V-chip rating system when your TV
is receiving a digital signal.
The V-Chip rating information and system are not determined or
controlled by the TV.
The standard V-chip rating system is available whether your TV is
receiving a digital signal or not. It blocks both analog and digital
programs.
[0-9] : Select
ENTER:Set
3
4
5
6
Enter your password using the number buttons (0-9), then press
ENTER. The Lock menu opens.
Press or to select Change Password, then press or
ENTER. The Change Password screen opens.
Enter your new password using the number buttons (0-9), then
press ENTER.
When the confirmation screen opens, re-enter the same
password, then press ENTER again. Your password is now
changed.
The downloadable V-chip rating system is an evolving technology, and
availability, content, and format may vary.
Using closed captioning
This television has the capability to decode and display closed
captioned television programs. Closed captioning displays text on the
screen for hearing impaired viewers or it can translate and display text
in another language.
• Captions—This closed caption mode displays text on the screen
in English or another language. Generally, closed captions in
English are transmitted on C1 and closed captions in other
languages are transmitted on C2.
Downloading an additional V-chip rating system
As a supplement to the standard V-chip rating system, your television
will be able to download an additional rating system, if such a system
becomes available in the future.
• Text—This closed caption mode usually fills half of the screen
with a programming schedule or other information.
To set closed captioning:
To download an additional V-chip rating system (when available):
1
Press SETUP/TV MENU. The initial on-screen menu opens.
1
Press SETUP/TV MENU. The initial on-screen menu opens.
Main Menu
Main Menu
Picture
Audio
Picture
Audio
Channel
Lock
Channel
>>
Lock
Setup
>>
Setup
ENTER :Set
: Select
ENTER :Set
: Select
2
3
4
Press or to select Setup, then press or ENTER. The Setup
menu opens.
Press or to select Closed Caption, then press or ENTER.
The Closed Caption menu opens.
Press or to select CC Setting.
• On—Captions are displayed on the screen.
• Off—Captions are not be displayed on the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Changing the TV settings
5
Press or to select Analog Caption or Digital Caption.
5 Press or to select CC Advanced, then press or ENTER.
The CC Advanced menu opens.
• Analog Caption options include C1, C2, C3, C4, T1, T2, T3,
and T4.
CC Advanced
• Digital Caption options include CS1, CS2, CS3, CS4, CS5, and
CS6.
Text Size
Auto
Auto
Auto
Auto
Auto
Auto
Auto
6
7
Press or to select the closed caption mode you want for
both analog and digital captions.
Text Type
Text Edge
Press or to select CC Priority, then press or to select
Digital CC or Analog CC.
Note: Depending on the broadcast signal, some analog captions can
function with a digital broadcast signal. This step prevents the two
types of captions from overlapping.
Text Color
Text Opacity
Background Color
Background Opacity
8
Press EXIT to return to normal viewing.
Notes:
: Adjust
: Select
If the program or video you selected is not closed captioned, no captions
6
Press or to select the item you want to change, then press
or to change the setting. You can choose from the following
options:
are display on-screen.
If text is not available in your viewing area, a black rectangle may appear
on-screen. If this happens, set the CC Setting to Off.
When selecting closed captions, the captioning will be delayed about 10
seconds.
• Text Size—Auto, Small, Standard, Large
• Text Type—Auto, Style1, Style2, Style3, Style4, Style5,
Style6, Style7
If no closed caption signal is received, no captions appear, but the
• Text Edge—Auto, None, Raised, Depressed, Uniform, Left
Shadow, Right Shadow
television remains in the Caption mode.
Misspellings or unusual characters may occasionally appear during closed
captioning. This is normal with closed captioning, especially with live
programs. This is because during live programs, captions are entered
live. These transmissions do not allow time for editing.
When captions are being shown, on-screen displays such as volume and
mute may be seen but may interfere with closed captions.
Some cable systems and copy protection systems may interfere with the
closed captioned signal.
If you use an indoor antenna, or if TV reception is very poor, the closed
caption decoder may not appear or may appear with strange
characters or misspelled words. In this case, adjust the antenna for
better reception or use an outdoor antenna.
• Text Color—Auto, Black, White, Red, Green, Blue, Yellow,
Magenta, Cyan
• Text Opacity—Auto, Solid, Transparent, Translucent,
Flashing
• Background Color—Auto, Black, White, Red, Green, Blue,
Yellow, Magenta, Cyan
• Background Opacity—Auto, Solid, Transparent,
Translucent, Flashing
Press EXIT to return to normal viewing.
7
Notes:
You cannot set both the Tex t Color and Background Color the same
color.
Changing advanced closed caption options
To change advanced closed caption options:
You cannot set both Text Opacity and Background Opacity to
Transparent.
1
Press SETUP/TV MENU. The initial on-screen menu opens.
Changing picture settings
Main Menu
To set the picture mode:
Picture
Audio
Channel
Lock
1
Press SETUP/TV MENU. The initial on-screen menu opens.
Main Menu
>>
Picture
>>
Setup
Audio
Channel
Lock
ENTER :Set
: Select
Setup
2
3
4
Press or to select Setup, then press or ENTER. The Setup
menu opens.
Press or to select Closed Caption, then press or ENTER.
The Closed Caption menu opens.
Press or to select Digital CC Preset, then press or to
select Custom.
ENTER :Set
: Select
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Changing the TV settings
2
Press or to select Picture, then press or ENTER. The
Picture menu opens.
3
Press or to select Picture Setting, then press or ENTER.
The Picture Setting menu opens.
Picture
Picture Setting
Picture Setting
Picture Preference
Picture Size
Film Mode
PC Setting
>>
Dynamic
>>
25
50
25
25
0
Brightness
Contrast
Sharpness
Color
On
Tint
>>
Color Temperature
Cool
DNR
On
: Select
: Adjust ENTER:Set
: Adjust
: Select
4
Press or to select the option you want to adjust, then press
or to make the adjustment. Available options include:
• Brightness—Lets you adjust the overall picture brightness
• Contrast—Lets you adjust the overall picture contrast (the
default setting is maximum)
• Sharpness—Lets you adjust the picture focus
• Color—Lets you adjust the color intensity of the picture
• Tint—Lets you adjust the overall tint (red-green) of the
picture
Press ENTER to return to the Picture Setting menu. Repeat Step 4
to adjust additional settings.
3
Press or to select Picture Preference, then press or
to select the preset picture mode you want. Options include:
• Dynamic—A bright and dynamic picture
• Standard—Standard picture quality
• Movie—A movie-like picture setting
normal viewing.
5
6
To set custom picture settings:
1 Press SETUP/TV MENU. The initial on-screen menu opens.
After making the adjustments you want, press EXIT to return to
normal viewing.
Main Menu
To set the color temperature:
1 Press SETUP/TV MENU. The initial on-screen menu opens.
>>
Picture
Audio
Channel
Lock
Main Menu
>>
Picture
Setup
Audio
Channel
Lock
ENTER :Set
: Select
Setup
2
Press or to select Picture, then press or ENTER. The
Picture menu opens.
ENTER :Set
: Select
Picture
2
Press or to select Picture, then press or ENTER. The
Picture menu opens.
Picture Setting
Picture Preference
Picture Size
Film Mode
PC Setting
>>
Dynamic
>>
Picture
On
Picture Setting
Picture Preference
Picture Size
Film Mode
PC Setting
>>
Dynamic
>>
>>
DNR
On
On
>>
ENTER :Set
: Select
DNR
On
ENTER :Set
: Select
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Changing the TV settings
3
Press or to select Picture Setting, then press or ENTER.
The Picture Setting menu opens.
3
Press or to select Picture Size, then press or ENTER. The
Picture Size menu opens.
Picture Setting
Picture Size
25
50
25
25
0
Brightness
Contrast
Sharpness
Color
0.Natural
1.Cinema Wide1
2.Cinema Wide2
3.Cinema Wide3
Tint
Color Temperature
Cool
4.Full
: Select
: Adjust
4
5
Press or to select Color Temperature, then press or
to select the color temperature preset you want. Available
options include:
• Cool—Gives the picture a bluish tint
• Normal—Gives the picture a neutral tint
• Warm—Gives the picture a redish tint
After choosing the preset you want, press EXIT to return to
normal viewing.
[0-4]:Select
4
Press or , or the corresponding number buttons, to select
the picture size you want. Options include:
• Natural—In some cases, this image displays the size of
standard 4:3 with a black side bar.
To set the picture size:
1 Press SETUP/TV MENU. The initial on-screen menu opens.
Main Menu
>>
Picture
Audio
Channel
Lock
• Cinema Wide1 (for 4:3 format programs)—To fill the
screen, the right and left edges are extended. However the
center of the picture remains near its former ratio. The top
and bottom edges of the picture may be hidden.
Setup
ENTER :Set
: Select
2
Press or to select Picture, then press or ENTER. The
Picture menu opens.
• Cinema Wide2 (for 4:3 format programs) The top and
bottom edges of the picture may be hidden.
Picture
Picture Setting
Picture Preference
Picture Size
Film Mode
PC Setting
>>
Dynamic
>>
On
>>
DNR
On
• Cinema Wide3 picture size (for letterbox programs with
subtitles)—To fill the width of the screen, it is extended
horizontally. However it is only slightly extended at the top
and the bottom. The top and bottom edges of the picture
may be hidden.
ENTER :Set
: Select
A B C D E FG- - - - - - - - - - - - - - - -
A B C D E FG- - - - - - - - - - - - - - - - - - - - - - - - - -
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Changing the TV settings
To set the picture in PC mode:
• Full picture size (for 16:9 source programs)—Displays the
picture at the maximum size.
1
Press SETUP/TV MENU. The initial on-screen menu opens.
Main Menu
>>
Picture
Audio
Channel
Lock
Setup
5
After choosing the picture size you want, press EXIT to return to
normal viewing.
Notes:
ENTER :Set
: Select
Selectable picture sizes may vary, depending on the input source or
broadcast signal.
2
Press or to select Picture, then press or ENTER. The
Picture menu opens.
The Picture Size menu can also be opened by pressing ZOOM on the
remote control.
Some high definition and/or digital broadcasts may not let you change
Picture
the picture size.
In HDMI or COMPONENT mode, with a scanning rate of 720p or 1080i, only
the Cinema Wide2 and Full sizes are available.
In PC Mode, only the Natural and Full picture sizes are available.
Additionally, this feature does not work when display mode is WXGA.
Picture Setting
Picture Preference
Picture Size
Film Mode
PC Setting
>>
Memory
>>
Off
>>
To set the film mode:
1 Press SETUP/TV MENU. The initial on-screen menu opens.
DNR
Off
Main Menu
ENTER : Set
: Select
>>
Picture
3
Press or to select PC Setting, then press or ENTER. The
PC Setting menu opens.
Audio
Channel
Lock
PC Setting
Setup
25
25
0
Hor Position
Ver Position
Clock
ENTER :Set
: Select
25
Phase
2
Press or to select Picture, then press or ENTER. The
Picture menu opens.
Picture
: Select
ENTER:Set
: Adjust
Picture Setting
Picture Preference
Picture Size
Film Mode
PC Setting
>>
Dynamic
>>
4
Press or to select the setting you want to adjust. Available
options include:
• Hor Position—Lets you adjust the horizontal position of
the image.
On
>>
• Ver Position—Lets you adjust the vertical position of the
image.
DNR
On
• Clock—Lets you adjust the clock, to eliminate vertical bars
or stripes on the picture background.
: Adjust
: Select
• Phase—Lets you adjust the phase, after the frequency has
been set, to optimize the picture.
3
4
Press or to select Film Mode, then press or to select
On or Off.
5
6
After you adjust one setting, press ENTER to return to the PC
Setting menu to adjust the other settings.
Note: For smoother motion, set the Film Mode to On when you view a
DVD.
After you have set the PC settings, press EXIT to return to normal
viewing.
Notes:
After choosing the setting you want, press EXIT to return to
normal viewing.
If no buttons are pressed for more than about 40 seconds, the menu screen
returns to normal automatically.
The computer settings do not affect other input modes.
Setting the DNR
DNR (Digital Noise Reduction) can reduce the roughness of the picture
(only for analog broadcasts).
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Changing the TV settings
To set the DNR:
3
4
Press or to select the item you want to adjust, then press
1
Press SETUP/TV MENU. The initial on-screen menu opens.
or to make the adjustment. Available options include:
• Bass—Lets you adjust the bass sounds.
• Treble—Lets you adjust the treble sounds.
• Balance—Lets you adjust the sound balance (left to right).
After you have adjusted the sound settings, press EXIT to return
to normal viewing.
Main Menu
>>
Picture
Audio
Channel
Lock
To select the stereo and SAP settings:
1 Press SETUP/TV MENU. The initial on-screen menu opens.
Setup
Main Menu
Picture
ENTER :Set
: Select
>>
Audio
Channel
Lock
2
Press or to select Picture, then press or ENTER. The
Picture menu opens.
Setup
Picture
Picture Setting
Picture Preference
Picture Size
Film Mode
PC Setting
>>
Dynamic
>>
ENTER :Set
: Select
2
Press or to select Audio, then press or ENTER. The Audio
On
menu opens.
>>
Audio
DNR
On
15
15
0
Bass
: Adjust
: Select
Treble
Balance
MTS
3
4
Press or to select DNR, then press or to select On or
Off.
Press EXIT to return to normal viewing.
Stereo
No Info.
HDMI
Audio Language
HDMI Audio
Changing the audio settings
To adjust the audio settings:
: Select
: Adjust
1
Press SETUP/TV MENU. The initial on-screen menu opens.
3
4
Press or to select MTS, then press or to select the
audio program type. Available options include:
Main Menu
Picture
• Stereo—Lets you listen to stereo audio (this setting
automatically outputs the type of sound being broadcast,
either stereo or mono.
• SAP—Lets you listen to a second audio program (SAP)
instead of normal audio.
• MONO—Lets you listen to monaural sound only.
Press EXIT to return to normal viewing.
>>
Audio
Channel
Lock
Setup
To select the audio language:
1
Press SETUP/TV MENU. The initial on-screen menu opens.
ENTER :Set
: Select
Main Menu
2
Press or to select Audio, then press or ENTER. The Audio
Picture
menu opens.
>>
Audio
Channel
Lock
Audio
15
15
0
Bass
Setup
Treble
Balance
MTS
Stereo
No Info.
HDMI
ENTER :Set
: Select
Audio Language
HDMI Audio
: Select
: Adjust
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Changing the TV settings
2
Press or to select Audio, then press or ENTER. The Audio
menu opens.
2
Press or to select Audio, then press or ENTER. The Audio
menu opens.
Audio
Audio
15
15
0
15
15
0
Bass
Bass
Treble
Treble
Balance
MTS
Balance
MTS
Stereo
English
HDMI
Stereo
No Info.
HDMI
Audio Language
HDMI Audio
Audio Language
HDMI Audio
: Select
ENTER:Set
: Select
: Adjust
3
4
Press or to select HDMI Audio, then press or to select
3
Press or to select Audio Language, then press or
ENTER. The Audio Language menu opens.
one of the following options:
• HDMI—When you connect an HDMI device to your TV.
• DVI—When you connect a DVI device to your TV and
connect the sound with an analog sound cable.
Press EXIT to return to normal viewing.
Audio Language
0. English
1. French
2. No Info.
3. No Info.
4. No Info.
5. No Info.
6. No Info.
Changing miscellaneous settings
Adjusting the back lighting
You can adjust the back lighting of the screen to improve picture clarity.
To adjust the back lighting:
1
Press SETUP/TV MENU. The initial on-screen menu opens.
Main Menu
[0-6]: Select
Picture
Audio
Channel
Lock
4
5
Press
you want.
Press EXIT to return to normal viewing.
,
, or the number buttons (0-6) to select the language
>>
Setup
Selecting the HDMI audio input source
When you have an HDMI or DVI device connected to the PC/DVI AUDIO
IN jack, with an HDMI or DVI device, you must select either an HDMI or
DVI audio input source.
ENTER :Set
: Select
To select the HDMI audio input source:
2
Press or to select Setup, then press or ENTER. The Setup
1
Press SETUP/TV MENU. The initial on-screen menu opens.
menu opens.
Main Menu
Picture
Setup
Closed Caption
Language
Video Label
Backlight
>>
>>
Audio
Channel
Lock
English
>>
16
Setup
Auto Shut Off
Reset
Off
>>
ENTER :Set
: Select
: Adjust
: Select
3
4
Press or to select Backlight, then press or to adjust
the setting.
Press EXIT to return to normal viewing.
Setting the automatic shut off
The Auto Shut Off feature automatically turns the TV off after 15
minutes if the station being viewed stops broadcasting or the TV is not
operated in that time.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Using the DVD player
To set the auto shut off:
Using the DVD player
Disc organization
1
Press SETUP/TV MENU. The initial on-screen menu opens.
Main Menu
Title
Picture
When two or more movies are recorded on a disc, the disc is divided into
two or more sections. Each section is called a “Title.”
Audio
Channel
Lock
Chapter
The titles can be subdivided into many sections. Each section is called a
“Chapter.”
>>
Setup
Track
An audio CD can contain several items. These are assigned to the tracks.
ENTER :Set
: Select
Regional code
2
Press or to select Setup, then press or ENTER. The Setup
menu opens.
Your player has a regional code 1 printed on the back of the case. Your
player can play only DVDs labeled with the same regional code 1 or ALL.
Notes:
Setup
Most DVDs have a globe with one or more numbers in it clearly visible on
the cover. This number must match your player’s regional code or the
DVD cannot play.
Closed Caption
Language
Video Label
Backlight
>>
English
>>
If you try to play a DVD with a different regional code from your player, the
message “Check Regional Code” appears on the TV screen.
16
Auto Shut Off
Reset
Off
>>
Understanding the disc status screen
To view the disc status screen:
1
Press DISPLAY. The disc status screen opens.
: Adjust
: Select
1
3
4
Press or to select Auto Shut Off, then press or to
select On (or Off if you want to turn it off).
Press EXIT to return to normal viewing.
2
3
DVD
00:15:25 01:41:39
Chapter 2/24
Title 1/3
9
4
Resetting your TV to factory default settings
To reset your TV to factory default settings:
1/1 Eng Dolby Digital
1/2 Eng
1/1
1
Press SETUP/TV MENU. The initial on-screen menu opens.
7
6
5
8
Main Menu
#
Information
Picture
Audio
Channel
Lock
1
2
3
4
5
6
7
8
9
Current disc operation
Elapsed time
Total time
>>
Setup
Chapter number playing
Subtitle language selected
Audio type selected
Audio language selected
Angle selected
ENTER :Set
: Select
2
Press or to select Setup, then press or ENTER. The Setup
menu opens.
DVD title number
Setup
2
When you are finished viewing the disc status screen, press
DISPLAY again to return to normal viewing.
Closed Caption
Language
Video Label
Backlight
>>
English
>>
16
Auto Shut Off
Reset
Off
>>
: Select
ENTER:Set
3
Press or to select Reset, then press or ENTER. “Reset”
appears on the screen for about three seconds, then the TV
returns to normal viewing.
Note: MTS and HDMI Audio are not reset by this procedure.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Using the DVD player
• Frame Advance—Press PAUSE/STILL during normal
playback to pause the program. Each time you press
PAUSE/STILL the program is advanced one frame. Press
PLAY to resume normal playback.
Playing DVDs
To play a DVD:
1
Press TV/DVD to change to DVD mode (each time you turn the TV
on, it starts in the TV mode). The DVD startup screen appears.
If you are using an amplifier, turn it on.
• Slow-motion Playback—Press SLOW reverse or
SLOW forward during normal playback or still playback. Each
press of either button decreases the speed of the program (×1/2,
×1/4, ×1/6, ×1/7). Press PLAY to resume normal playback.
2
3
Place the disc in the disc slot with the label side facing forward.
Hold the disc by the edges, without touching either of its
surfaces.
• Locating a chapter or track—Press SKIP
forward or
reverse during playback to locate a chapter that you
SKIP
want to watch. Each time you press the button, a chapter or track
is skipped.
Notes:
The unit is capable of holding a still video image or on-screen display
image on your television screen indefinitely. If you leave the still video
image or on-screen display image displayed on your TV for an
extended period of time, you risk permanent damage to your
television screen.
There may be a slight delay between when you press the button and the
feature activating.
Locating a specific scene on a DVD
You can use the title, chapter, and time recorded on the disc to locate a
specific point to play back.
On the screen, changes to “Reading” and playback begins.
If the disc has a menu feature, the menu screen may appear. In
this case, press
,
,
, or and ENTER to navigate the menu.
To locate a specific scene on a DVD:
4
Press STOP to end playback. The unit memorizes the stopped
1
Press T.SEARCH during playback or in stop mode. The T. Search
menu opens.
point and
appears on the screen. Press PLAY to resume
playback (from the memorized point).
T.Search
5
6
If you press STOP again, or unload the disc, the unit clears the
memorized stop point.
Press (eject). Remove the disc and then press POWER. The
unit turns off.
Title
Chapter
Time
Notes:
If your unit does not operate properly, it may be affected by static
electricity. Disconnect the AC power cord, then connect it again.
If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error,” or
“Parental Error” appears on the TV screen, depending on the type of
Some discs may take about a minute to start playback.
If an 8 cm disc is loaded and picture playback or menu display does not
begin automatically, press PLAY to begin playback.
2
3
Press or to select the Title, Chapter, or Time.
Press the number buttons (0–9) to enter the number. Refer to
the package supplied with the disc to check the numbers. If you
enter a wrong number, press EXIT.
Press ENTER. Playback starts.
When you change the title, playback starts from Chapter 1 of the
selected title.
4
A “Prohibition” symbol “X” may appear at the upper right of the screen.
This symbol means either the feature you tried is not available on the
disc, or the player cannot access the feature at this time. This does not
indicate a problem with the player.
Some discs may not work in the above operation.
Marking your favorite scenes
The TV stores the points that you want to watch again. You can resume
playback from that scene.
If you load a single-faced disc backwards, “Reading” appears on the
screen, then “Incorrect Disc” is displayed.
To mark the scenes you want:
Some DVD playback operations may be intentionally preset by the
manufacturer. Since this player plays DVDs according to the disc
content recorded, some playback features may not be available. Refer
to the instructions supplied with the DVD.
1
Press MARKER during playback. The Marker menu opens.
Marker 1
Marker 2
Marker 3
00 27 54
Controlling playback
To control playback:
• Fast Forward Playback—Press SEARCH
during normal
playback. Each time you press SEARCH
, the speed increases
2
3
Press or to select a blank marker, then press ENTER at the
desired scene. Up to three scenes can be selected. If you want,
you can repeat this procedure to set the other two scenes.
(DVD - × 2, × 4, × 8, ×15) (CD - × 2, × 4, × 8, × 20). Press PLAY
to resume normal playback.
• Fast Reverse Playback—Press SEARCH
playback. Each time you press SEARCH
during normal
, the speed increases
Press MARKER again to close this dialog box.
(DVD - × 2, × 4, × 8, ×15) (CD - × 2, × 4, × 8, × 20). Press PLAY
to resume normal playback.
• Pause—Press PAUSE/STILL during normal playback to
pause the program. Press PLAY to resume normal playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Using the DVD player
To replay marked scenes:
3
To resume normal playback, press A-B again. “ Off” appears
on the screen.
Notes:
1
Press MARKER during playback or stop mode. The Marker dialog
box opens.
Some discs may not work with the A-B Repeat feature.
In A-B Repeat mode, subtitles near point A or B may not appear.
Marker 1
Marker 2
Marker 3
00 27 54
01 16 25
02 08 31
Changing the soundtrack language
You can select the language when you play a multilingual disc.
To select a different soundtrack language:
1
Press AUDIO during playback. The current soundtrack language
is shown on the screen.
2
Press or to select Marker 1-3, then press ENTER. Playback
starts from the marked scene.
1/2 Eng Dolby Digital
To cancel the mark:
1
Press MARKER during playback or stop mode. The Marker menu
opens.
2
Press AUDIO repeatedly until the desired language is selected.
Marker 1
Marker 2
Marker 3
00 27 54
01 16 25
02 08 31
The on-screen display disappears after a few seconds.
Notes:
If the desired language is not heard after pressing AUDIO several times,
the language is not recorded on the disc.
The alternate soundtrack language is cancelled when you eject the disc
and the initial (default) language will be heard if the disc is played
back again.
2
Press or to select Marker 1-3, then press EXIT. The marker
is removed.
Notes:
Displaying subtitles
Marking is canceled when you eject the disc or turn the power off.
Some subtitles recorded around the marker may fail to appear.
While playing a DVD, you can turn on subtitles and select the subtitle
language.
Repeating DVD playback
To repeat a Title or Chapter:
To turn subtitles on, select the subtitle language, or turn subtitles off:
1
Press SUBTITLE repeatedly during playback to cycle through the
available subtitle languages.
1
Press REPEAT during playback or stop mode. The Play Mode
menu opens.
1/5 Eng
Play Mode
Repeat
: Off
Stop when you reach the language you want. The on-screen
display disappears after a few seconds.
To turn subtitles off, press SUBTITLE again repeatedly until Off is
selected.
2
3
Press ENTER repeatedly to select Chapter or Title.
Press REPEAT again to make the menu disappear.
The unit automatically starts to repeat playback after finishing
the current title or chapter. In stop mode, press PLAY to start
repeat playback.
2
Notes:
The selected subtitle language is cancelled when you eject the disc.
Some features may not work on some DVDs. You may not be able to turn
subtitles on or off or change subtitles. While playing a DVD, the
subtitle may change when you eject the disc or change the title.
In some cases, the subtitle language is not changed to the selected one
immediately.
4
To resume normal playback, open the Play Mode menu again,
then select Off.
Using A-B Repeat
A-B Repeat lets you repeat a specific segment of a DVD between two
selected points.
Changing the viewing angle
When playing back a disc recorded with multiple angles, you can
change the viewing angle.
To repeat a specific segment of a DVD:
1
Press A-B during playback. The start point is selected.
To change the viewing angle:
A
1
Press ANGLE during playback. The current angle is shown on the
screen.
1/2
2
Press A-B again. The end point is selected.
A
B
Playback starts at the point (A) that you selected. Playback stops
at the end point (B), then returns to point A automatically and
starts again.
2
Press ANGLE repeatedly until the desired angle is selected.
Note: Depending on the DVD, you may not be able to change the angles,
even if multiple angles are recorded on it.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Using the DVD player
Selecting the title
3
4
Press or to select the desired option, then press or
ENTER.
Some DVDs are recorded with two or more titles. If a title menu is
recorded on the disc, you can select the title you want.
Press or to select the language you want, then press
ENTER. Available options include:
To select a title:
1
2
Press DVD TITLE during playback. The Title menu opens.
Press , or to select the title you want, then press
ENTER or PLAY. The selected title starts playing.
Note: Depending on the DVD, you may not be able to select a title.
Depending on the DVD, a “title menu” may be called a “menu” or “title”
in the instructions supplied with the disc.
• English
,
,
• French (Français).
• Spanish (Español)
• Other—Additional languages can be selected using the
• Original (Audio)—Subtitle will appear in the original
language of the disc.
Using the DVD menu
Some DVDs let you select the disc contents using the menu. When you
play these DVDs, you can select the subtitle language, soundtrack
language, and so on, using the DVD menu.
To use the DVD menu:
5
Press SETUP/TV MENU to close the menu screen.
Note: If the selected language is not recorded on the disc, the first priority
language is selected.
1
2
Press DVD MENU during playback. The DVD menu opens.
Press DVD MENU again to resume playback at the scene when
you pressed DVD MENU.
Setting the aspect ratio
To set the aspect ratio:
1
Press SETUP/TV MENU in stop mode or with no disc inserted.
The DVD menu opens.
3
Press
,
,
, or to select the title you want, then press
ENTER. The menu continues to another screen. Repeat Steps 2
and 3 to set additional items.
TV Screen
: 16:9
: On
Display
Using the Zoom feature
Your player lets you zoom in on the frame image. You can then make
selections by switching the position of the frame.
To use the Zoom feature:
Picture Mode
JPEG Interval
: Auto
: Off
1
Press ZOOM during playback. The center part of the image is
magnified. Each time you press ZOOM, the magnification
changes 1 = ×1.3, 2 = × 1.5) and 3 = × 2.0.
2
3
Press
,
,
, or to view a different part of the picture.
2
Press or to select the Display icon , then press or
or ENTER. The Screen menu opens.
Press ZOOM repeatedly to return to a 1:1 view ( Off).
Notes:
While in zoom mode, you can use Pause, Slow, or Search.
Zoom may not work with some discs.
TV Screen
4:3
4:3
Display
Setting the language
You can select the language of the menu, subtitle, and soundtrack if
more than one language is recorded onto the disc.
To set the language:
16:9
Picture Mode
JPEG Interval
: Off
1
Press SETUP/TV MENU while in stop mode. The DVD menu
opens.
Menu
: English
: English
: English
3
4
Press or to highlight TV Screen, then press or ENTER.
Press or to select the screen type you want, then press
ENTER. Available options include:
Subtitle
Audio
• 4:3 Letterbox—When playing a wide-screen DVD, this
option displays the wide picture with black bands at the top
and bottom.
• 4:3 Panscan—Displays a wide picture on the whole screen,
with left and right edges automatically cut off.
• 16:9 Wide—Displays wide-screen pictures full size.
Press SETUP/TV MENU to close the menu screen.
Note: It is not always possible for the DVD to display the picture in your
preferred picture setting. For example, the disc may not offer “4:3
Panscan.” In this case the picture would display in the format available
on the disc.
2
Press or to select the Language icon , then press or
or ENTER. The Language menu opens.
5
Menu
English
Francais
Espanol
Other
Subtitle
Audio
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Using the DVD player
Setting the on-screen display
The on-screen display can be turned on or off when you press any
buttons.
2
Press or to select the Display icon then press or
or ENTER. The Screen menu opens.
To set the on-screen display:
TV Screen
:16:9
: On
1
Press SETUP/TV MENU in stop mode or with no disc inserted.
The DVD menu opens.
Display
Auto
Picture Mode
JPEG Interval
Film
TV Screen
: 16:9
: On
Video
Display
Picture Mode
JPEG Interval
: Auto
: Off
3
4
Press or to highlight Picture Mode, then press or
ENTER.
Press or to select the setting you want, then press ENTER.
Available options include:
2
Press or to select the Display icon , then press or
or ENTER. The Screen menu opens.
• Auto—Select this option for normal viewing. The unit
automatically detects the source content.
• Film—Suitable for film content.
TV Screen
:16:9
• Video—Suitable for video content.
Off
Display
5
Press SETUP/TV MENU to close the menu screen.
On
Picture Mode
JPEG Interval
Setting the night mode
Night mode lets you control the dynamic range of your equipment.
To set the night mode:
: Off
1
Press SETUP/TV MENU in stop mode or with no disc inserted.
The DVD menu opens.
Night Mode
Digital Out
: Off
3
4
Press or to highlight Display, then press or ENTER.
Press or to select the setting you want, then press or
ENTER. Available options include:
: PCM
• Off—On-screen displays are not shown, except when you
press SUBTITLE, REPEAT, MUTE, VOLUME, MARKER,
DISPLAY, AUDIO, and T.SEARCH.
• On—On-screen displays are shown when you press the
buttons (default).
Press SETUP/TV MENU to close the menu screen.
5
2
Press or to select the Audio icon , then press or or
ENTER. The Audio menu opens.
Setting the picture mode
There are two types of source content in pictures recorded on DVDs.
These include film content (pictures recorded from films at 24 frames
per second) and video content (video signals recorded at 30 frames per
second). Make this selection according to the type of content being
viewed.
Night Mode
Digital Out
Off
On
To set the picture mode:
1
Press SETUP/TV MENU in stop mode or with no disc inserted.
The DVD menu opens.
TV Screen
: 16:9
: On
Display
3
4
Press or to highlight Night Mode, then press or ENTER.
Press or to select the setting you want, then press ENTER.
Available options include:
• On—Loud sounds, such as explosions, are toned down
slightly.
• Off—Audio is played as recorded.
Press SETUP/TV MENU to close the menu screen.
Picture Mode
JPEG Interval
: Auto
: Off
5
Setting the digital sound output
You can select the digital sound output, based on your system
connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Using the DVD player
To set the digital sound output:
3
Press or to select the Parental, then press or ENTER.
The Enter Password screen opens.
1
Press SETUP/TV MENU in stop mode or with no disc inserted.
The DVD menu opens.
Parental
: Off
Night Mode
Digital Out
: Off
Enter Password
Password
: PCM
4
5
Enter “0000” using the number buttons (0-9), this is the preset
password, then press ENTER. The parental level list opens. If you
enter a wrong number, press EXIT and try again.
Press or to select the setting you want, then press ENTER.
Available options include:
2
Press or to select the Audio icon , then press or or
ENTER. The Audio menu opens.
Night Mode
Digital Out
: Off
Off
• Level Off—No control.
PCM
• Level 8—Virtually all DVDs can be played back.
• Level 1—The most restrictive setting.
Bitstream
The limitation is more restrictive as the level number decreases.
6
Press SETUP/TV MENU to close the menu screen.
Notes:
The level of dynamic range reduction may differ, depending on the DVD.
Depending on the disc, the unit may not be able to limit playback.
Some discs may not be encoded with specific rating level information,
even though the disc jacket says “adult.” For those discs, the age
restriction does not work.
3
4
Press or to highlight Digital Out, then press or ENTER.
Press or to select the setting you want, then press ENTER.
Available options include:
After the rating is locked, the setting cannot be changed unless you enter
• Off—No sound output from the DIGITAL AUDIO OUT jack.
• PCM—Changes Dolby Digital to PCM output. Choose this
option when your player is connected to a 2-channel digital
stereo amplifier.
• Bitstream—Disc audio bitstream data is output.
Press SETUP/TV MENU to close the menu screen.
Notes:
the correct password.
To set a new password:
1
Press SETUP/TV MENU in stop mode or with no disc inserted.
The DVD menu opens.
5
Parental
: Off
This feature works only during playback of Dolby-Digital recorded discs.
Even if you select “Bitstream,” MPEG audio will be output in PCM format.
Password
: Change
Setting parental controls
Some discs are specified “not suitable for children.” You can limit
playback of these discs on your TV/DVD.
To set the password and parental control level:
1
Press SETUP/TV MENU in stop mode or with no disc inserted.
The DVD menu opens.
2
3
Press or to select the Parental icon , then press or
or ENTER. The Parental Control menu opens.
Press or to select the Password, then press or ENTER.
The Enter Current Password screen opens.
Parental
: Off
Password
: Change
Parental
: Off
Password
: Change
Enter Current Password
2
Press or to select the Parental icon , then press or
or ENTER. The Parental Control menu opens.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Using the DVD player
4
Enter your password using the number buttons (0-9), then press
• Music files recorded by the “Hierarchical File System” (HFS)
cannot be played.
• This player can play back baseline and progressive JPEG files.
• MP3 or WMA files on a KODAK Picture CD are not recognized by
this player.
ENTER. The Enter New Password screen opens. If you enter a
wrong number, press EXIT and try again.
Parental
: Off
Limitations on display
Password
: Change
• Only 15 characters of a file name are displayed. Long file names
are condensed.
Enter New Password
• Available letters for display are capital or lowercase letters A
through Z, numbers 0 through 9, and _ (underscore).
• Other letters than those above are replaced by a hyphen.
Notes on MP3/WMA/JPEG files
• To play back MP3/WMA/JPEG CDs in recorded order:
• Use MP3/WMA/JPEG software that records data
alphabetically or numerically.
• File names should include a two-digit or three-digit number
(for example, “01” “02” or “001” “002”).
Notes:
5
Enter your new password using the number buttons (0-9), then
press ENTER. Your new password has been set.
Note: Do not forget your new password. Write it down in a convenient
place. If you forget the password, contact Customer Service. The
original remote control will be required.
Some MP3/WMA/JPEG CDs cannot be played back, depending on the
recording conditions.
Temporarily disabling the rating level
Some pre-recorded DVDs may attempt to temporarily cancel the rating
level that you have set. You are given the option to allow or not allow
the override.
The CD-R/RW that has no music data or non-MP3/ WMA/JPEG files can
not be played.
MP3/WMA CD and audio CD playback
To play back MP3/WMA and audio CDs:
To temporarily disable the rating level:
1
Load a DVD. If the DVD has been designed to temporarily cancel
the rating level, an option screen opens. Press ENTER to select
YES to override the rating, or NO to accept the rating.
1
Load an MP3/WMA/JPEG CD or an audio CD into the disc slot.
“Reading” appears on the TV (reading time depends on the
number of files on the disc), then a file browser appears on the
screen.
2
If you select YES, an Enter Password screen opens.
2
3
1
4
Enter Password
1/15 00:00:00
/MP3-5.MP3
Select Files
MP3-5
Repeat :Off
MP3-6
5
:Off
Mod
WMA-11
WMA-12
Picture-1
Picture-2
Picture-3
Picture-4
3
Enter your password using the number buttons (0-9), then press
ENTER. Playback begins if you enter the correct password.
8
Note: This temporary cancellation of the rating level is retained until the
disc is ejected, at which time the original rating level will be set again
automatically.
Music Playing
Playing MP3, WMA, JPEG and audio CD
discs
7
6
This player can play back MP3, WMA, and JPEG data which has been
recorded on CD-R or CD-RW discs. To produce MP3, WMA, and JPEG
discs, you need a Windows computer with CD burner and MP3/WMA/
JPEG encoding software (not supplied). The Apple-HFS-System discs
cannot be played.
#
Information
1
2
3
4
5
6
7
8
Disc operation status
File number
Elapsed time
MP3/WMA/JPEG CD disc information
Limitations on MP3/WMA/JPEG CD playback
• MP3/WMA/JPEG CDs are standardized by ISO9660. File names
must include the three-digit extension letters “MP3”, “WMA”, or
“JPEG”.
Selected file name
Tool kit window
Preview window
Cursor
• The directory and file names of MP3/WMA/JPEG CDs must
correspond to ISO standardized files.
• This player can read 2000 files per disc. If one folder has more
than 2000 files, it reads up to 2000 files. The remaining files are
omitted.
• If a CD has both audio tracks and MP3/WMA/JPEG files, only
audio tracks are played.
• It may take more than one minute for this player to read
MP3/WMA/JPEG files, depending on the disc structure.
• Music recorded by “Joliet Recording Specification” can be played
back.
File list ( =music, =picture)
• If the current directory includes nine files or more, press or
to scroll through the file list.
• To see the contents of a folder, select the folder, then press
ENTER. To return to the parent directory, select
“
Go Up ...” then press ENTER.
• If a CD contains a mixture of MP3, WMA, and JPEG files, the
files are played back by selecting them from the file browser.
Press or to select the file you want to play.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
30
Using the DVD player
When you press PLAY after displaying the file browser, playback
begins automatically starting from the first file. If there is no file
in the root directory, playback does not begin automatically.
Repeating CD playback
To repeat CD playback:
1
In the file browser, press
,
,
, or to select Repeat.
3
4
Press ENTER. The selected file starts playing.
Press STOP to end playback. The unit memorizes the stopped
point and appears on the screen. Press PLAY to resume
playback. If you press STOP again or unload the disc, the unit
clears the stopped point.
Folder-1
Folder-2
MP3-1
Select Files
Repeat :Track
:Off
Mode
MP3-2
Notes:
MP3-3
During MP3/WMA/JPEG playback, you cannot use T.SEARCH and A-B.
You can use Program playback, Repeat (Track or All), and Random
features for MP3/WMA/ JPEG and audio CD Playback.
WMA-1
WMA-2
WMA-3
JPEG Preview
Programming CD playback
To program CD playback:
2
3
Press ENTER repeatedly to select Track and All.
1
In the file browser, press
then press ENTER.
,
,
, or to select Edit Mode,
Press PLAY. The unit starts to repeat playback after the current
track is finished. To resume normal playback, set Repeat to Off in
Step 2.
Notes:
Folder-1
Folder-2
MP3-1
The repeat or random functions are cancelled when you eject the disc or
Repeat :Off
Mode
:Off
turn the power off.
Edit Mode
The track repeat function is cancelled when SKIP
back is pressed.
You can also use the A-B Repeat feature with audio CDs.
forward or SKIP
MP3-2
MP3-3
WMA-1
WMA-2
WMA-3
JPEG Preview
Random CD playback
To randomly play the tracks on a CD:
1
In the file browser, press
,
,
, or to select Mode.
When Edit Mode is highlighted black, you can mark the files
which you want to add to the program list.
2
Press
,
,
, or to select the file you want to add to the
Folder-1
Folder-2
MP3-1
Select Files
Repeat :Off
Mode :Random
program list, then press ENTER. The selected file is marked.
MP3-2
MP3-3
Folder-1
Repeat :Off
WMA-1
WMA-2
WMA-3
Folder-2
MP3-1
Mode
:Off
JPEG Preview
Edit Mode
MP3-2
MP3-3
WMA-1
WMA-2
WMA-3
2
3
Press ENTER to select Random.
JPEG Preview
Press PLAY. The unit starts random playback after the current
track is finished. To resume normal playback, set the mode to Off
in Step 2.
3
4
Repeat this procedure to select the other files.
JPEG playback
Press
,
,
, or to select Add To Program, then press
To play back JPEG files:
ENTER. All marked files are added to the program list.
1
Load a JPEG CD into the disc slot. The JPEG browser opens.
When you finish adding the files you want to the program list,
select Edit Mode again, then press ENTER to exit edit mode.
Press or to highlight Program View, then press ENTER.
Program View shows only the files you have added to the
program list.
/Picture-01.JPG
5
Select Files
Picture-01
Picture-02
Picture-03
Picture-04
Picture-05
Picture-06
Picture-07
Picture-08
Repeat :Off
Mode
:Off
Folder-1
Folder-2
MP3-1
MP3-1
MP3-2
MP3-3
WMA-3
Edit Mode
Program View
Add To Program
Edit Mode
Browser View
Clear Program
MP3-2
MP3-3
WMA-1
WMA-2
WMA-3
JPEG Preview
JPEG Preview
W: 2048 H: 1536
6
7
In the Program View, press PLAY. The files start to playback in
programmed order.
To remove a file from the program list in stop mode, select Edit
Mode, then switch to Program View. Select the files you want
to remove, then press ENTER. Select Clear Program and press
ENTER. Marked files are removed from the program list.
2
Press DVD MENU to display a thumbnail list of pictures on the
disc, then press , or to select the file you want to see
,
,
(or press DVD TITLE to return to the file browser).
Press ENTER or PLAY. The selected picture is displayed.
To rotate the image, press ANGLE. Each time you press ANGLE,
the image rotates by 90°.
3
4
Note: The program is cancelled when you eject the disc or turn the power
off.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Appendix
5
6
To zoom in on an image, press ZOOM.
Press STOP to end playback. If you want to view another picture,
repeat Steps 2 and 3.
Appendix
Language code list
To display selected file types:
1
2
3
4
With the JPEG browser open, press or to highlight Select
Files in the right column, then press ENTER.
Press or to select the file type from the list (Music or
Picture).
Press ENTER to add or remove the check mark. The checked file
type is displayed in the file browser.
Press RETURN to save the setting.
Setting the JPEG interval
You can automatically play back all JPEG files continually.
To set the JPEG interval:
1
Press SETUP/TV MENU in the stop mode. The DVD menu opens.
TV Screen
: 16:9
: On
Display
Picture Mode
JPEG Interval
: Auto
: Off
2
Press or to select the Display icon , then press or
or ENTER. The Picture menu opens.
TV Screen
Display
: 16:9
: On
Playable discs
Picture Mode : Auto
Off
JPEG Interval
Disc
Characteristics
DVD (12 cm disc)
5 Seconds
10 Seconds
15 Seconds
DVDs such as movies that can be purchased
or rented. Your player can play one-layer or
two-layer discs.
DVD-R/RW discs with DVD video format are
also available.
3
4
Press or to select JPEG Interval, then press or ENTER.
Press or to select the time interval you want, then press
ENTER. Available options are Off (plays one file at a time),
5 Seconds, 10 Seconds, and 15 Seconds.
Audio CD (8 cm/12 cm disc)
Music CDs or CD-Rs/CD-RWs in music CD
format that can be played.
5
Press SETUP/TV MENU to close the menu screen.
CD-R/CD-RW (12 cm disc)
CD-R/CD-RWs that contain audio titles, MP3,
WMA, or JPEG files.
Notes:
Do not use irregularly shaped CDs (for example, heart-shaped or
octagonal). Doing so may result in malfunctions.
Depending on the recording software and the finalization, some recorded
discs (CD-R/RW or DVD R/RW) may not be playable.
DVD-R/RW, DVD+R/RW, and CD-R/RW discs recorded using a personal
computer or a DVD or CD recorder may not play if the disc is damaged
or dirty or if there is dirt or condensation on your player’s lens.
If you record a disc using a personal computer, even if it is recorded in a
compatible format, there are cases in which it may not play because of
the settings of the software used to create the disc. (Check with the
software publisher for more detailed information.)
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Maintaining
Your player requires discs and recordings to meet certain technical
standards in order to achieve optimal playback quality. Pre-recorded
DVDs are automatically set to these standards. There are many
different types of recordable disc formats (including CD-R containing
MP3 or WMA files), and these require certain pre-existing conditions
(see above) to ensure compatible playback.
You should note that permission is required in order to download MP3 or
WMA files and music from the Internet. Our company has no right to
grant such permission. Permission should always be sought from the
copyright owner.
Troubleshooting
Using progressive scan
Not all high-definition televisions are fully compatible with your player
and may cause artifacts to be displayed in the picture.
In case of progressive scan picture problems, we recommend that you
switch the connection to the standard definition output. If there are
questions regarding your television’s compatibility with your player,
contact our customer service center.
Use the following check list for troubleshooting when you have
problems with your TV. Consult your local dealer or service outlet if
problems persist.
Maintaining
Cleaning
Make sure that all connections are correctly made.
• Before cleaning the screen, unplug your TV from the power
outlet.
• Wipe the front panel and other exterior surfaces of your TV with a
soft cloth immersed in lukewarm water, then wrung dry.
• Never use a solvent or alcohol. Do not spray insecticide liquid
near your TV. Such chemicals may cause damage and
discoloration to the exposed surfaces.
Problem
Solution
General problems
No power
• Make sure the power cord is plugged in.
• Power is off, check fuse or circuit breaker.
• Unplug the TV, then plug it back in.
TV reception problems
Care and handling of discs
Ghosts in the picture Ghosts are caused by the television signal
following two paths. One is the direct path
and the other is reflected by tall buildings,
hills or other large objects. Changing the
direction or position of the antenna may
improve the reception.
Handling discs
Do not touch the playback side of the disc. Hold the disc by the edges so
that fingerprints do not get on the surface. Never stick paper or tape on
the disc.
Ignition noise
Black spots or horizontal streaks may appear,
or the picture may flutter or drift. Usually
caused by interference from automobile
ignition systems, neon lamps, or AC-powered
tools and appliances, such as drills or hair
dryers.
Storing discs
Snow in the picture
If the TV is located far from the TV station,
such as in a fringe reception area where the
signal is weak, small dots may appear in the
picture. If the signal is extremely weak, the
installation of a larger external antenna may
be necessary.
After playing, store the disc in its case. Do not expose the disc to direct
sunlight or sources of heat and never leave it in a parked car exposed to
direct sunlight.
Cleaning discs
Radio frequency
interference (RFI)
Caused by two-way radios, this type of
interference produces moving ripples or
diagonal streaks in the picture. Some cases
may cause a loss of contrast in the picture.
Changing the direction and position of the
antenna or installing an RFI filter may
improve the picture.
Fingerprints and dust on the disc can cause poor picture quality and
sound distortion. Before playing, clean the disc with a clean cloth. Wipe
the disc from the center out.
Picture size variations A slight picture size variation is normal when
you adjust the contrast or brightness
settings.
Poor or no sound
• Station or cable TV are experiencing
problems. Tune to another station.
• Check volume adjustments or muting.
• Check for sources of possible
interference.
Do not use strong solvents such as alcohol, benzine, thinner,
commercially available cleaners, or anti-static spray intended for older
vinyl records.
Poor or no picture
• Station or cable TV are experiencing
problems. Tune to another station.
• Check antenna or cable TV connections.
Reorient the antenna.
Servicing
• Check for sources of possible
interference.
Do not try to repair your TV yourself. There are no user-serviceable parts
inside. Turn off your TV, unplug the power cord, then contact an
authorized service center.
• Check picture control adjustments.
Poor reception on
some channels
• Station or cable TV are experiencing
problems. Tune to another station.
• Station signal is weak. Reorient the
antenna to receive stronger station.
• Check for sources of possible
interference.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Specifications
Problem
Solution
Problem
Solution
Poor color or no color
• Station or cable TV are experiencing
problems. Tune to another station.
• Make sure channels are set into memory.
• Check picture control adjustments.
• Check antenna or cable TV connections
and reorient the antenna.
Playback does not
start when the title is
selected
Check the Parental setup.
The audio soundtrack Multiple languages are not recorded on the
or subtitle language is DVD disc.
not changed when
• Check for sources of possible
interference.
you play back a DVD
No subtitles
• Some discs have no subtitles.
Picture wobbles or
drifts
• Station or cable TV are experiencing
problems. Tune to another station.
• Make sure channels are set into memory.
• Cable TV company is scrambling signal.
• Check antenna orientation.
• Subtitles are cleared. Press SUBTITLE.
The angle cannot be Multiple angles are not recorded on the DVD.
changed
“X” appears on the
screen.
The function chosen is prohibited by the
player or the disc.
No cable TV reception
• Check all cable TV connections.
• Set Signal Type option to the Cable
mode.
• Station or cable TV system problems. Try
another station.
Remote control
The remote control
does not function.
• Aim at the remote control at the remote
sensor.
• Operate within about 15 feet (5 m) of the
TV, or reduce the light in the room.
• Clear the path of the beam.
• The batteries are weak. Replace the
batteries.
Horizontal or diagonal • Check antenna connections, reorient
bars on the screen
antenna.
• Check for sources of possible
interference.
No reception above
channel 13
• Make sure Signal Type option is in the
appropriate mode.
• If using an antenna, check UHF antenna
connections.
• Make sure that the batteries are inserted
correctly.
Specifications
TV turns off
• No broadcast on station tuned.
• The Sleep Timer is set.
• The power has been interrupted.
General
Closed captioning
does not work
• The TV station is experiencing problems
or the program tuned is not closed
captioned. Try another channel.
• Check cable TV connection or VHF/UHF
antenna, then reposition or rotate the
antenna.
120V AC 60 Hz
Power supply
Operation: 65 W
Standby: 0.8 W
Power consumption
12.8 lbs. (5.8 kg)
Weight
• Set closed captioning in the menu.
21.25 × 17.5 × 8.25 inches
(53.7 × 43.95 × 20.7 cm)
Dimensions
Display is not shown in • Select the correct language in the menu
(W×H×D)
your language
options.
41°F - 104°F (5°C - 40°C)
Operating
Picture has a few
bright or dark dots
A few bright or dark dots on an LCD screen is
normal. It does not affect the operation of
this TV.
temperature
Less than 80%
Operating humidity
DVD problems
Television
Playback does not
start
• No disc is inserted.
• The disc may be dirty. Clean the disc.
• The disc may be incompatible.
21.6 inches (548.0 mm) diagonal
Transmission TFT color LCD panel
1680 (H) × 1050 (V)
Type
Display method
Number of pixels
Viewing angle
No picture
No sound
The TV selector is not set correctly.
• Make sure that the input selector of the
amplifier is set correctly.
Left/Right 85/85 degrees
Up/Down 80/80 degrees
• The player is in the Special playback
mode.
NTSC standard
ATSC standard (8VSB), QAM
• Select the correct Audio Output position
on the AV amplifier.
Tuner type
VHF
UHF
CATV
2-13
Picture is distorted
The picture will be distorted occasionally.
Receiving channels
14-69
during CUE or REVIEW
14-36 (A)-(W)
37-59 (AA)-(WW)
60-85 (AAA)-(ZZZ)
86-94 (86)-(94)
95-99 (A-5)-(A-1)
100-125 (100)-(125)
01 (5A)
You cannot stop
playback, or search,
slow-motion play,
repeat play, or
Some discs may not allow some functions.
program play
No on-screen display Select Display On.
No surround sound
The setup does not match your stereo
system.
The unit or remote
Turn off the player and unplug the AC power
operation keys are not cord for several minutes, then plug it in
working
again.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Legal notices
S-Video:
Y-Input: 1.0 V (p-p), 75 ohms
C-Input: 0.3 V (p-p), 75 ohms
(RCA) 1 V p-p/75 ohms
Inputs
Video:
Audio:
(RCA) –8 dBm/50K ohms
Component: (Y) 1 V (p-p), 75 ohms
(Pb)/(Pr) 0.7 V (p-p), 75 ohms
HDMI:
HDMI compliant (type A
connector)
HDCP compliant
E-EDID compliant
Suggested scan rates: 480p, 480i,
720p, and 1080i
HDMI/PC
audio input
alternative: 2-channel PCM
32/44.1/48 kHz sampling
frequency 16/20/24 bits per
sample
PC monitor: Mini-D-sub 15-pin x 1
Antenna:
VHF/UHF In 75 ohms coaxial
Digital audio out: 0.5 Vp-p 75 ohms terminated
Outputs
Speaker
1-3/16 inches x 2-13/16 inches
(30.4 mm × 71.1 mm), 8 ohms (2)
1.5 W + 1.5 W
Audio output power
DVD/CD player
NTSC
Signal system
Applicable disc
DVD (12 cm)
CD (12 cm, 8 cm)
CD: Wavelength: 790 nm
Maximum output power: 7 mW
DVD: Wavelength: 655 nm
Maximum output power: 5 mW
Pickup
Remote control
Accessories
Batteries AAA (2)
AC cord
User Guide (with FCC information)
Specifications are subject to change without notice.
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this
product is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply within the limits
for a class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
FCC warning
Changes or modifications not expressly approved by the party
responsible for compliance with the FCC Rules could void the user’s
authority to operate this equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Legal notices
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR
One-Year Limited Warranty
EXCLUSIVE REMEDY. DYNEX SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA,
LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. DYNEX
PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE
PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF AND
CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH
ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY
AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND
JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE
OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO
PROVINCE.
Dynex Products (“Dynex”) warrants to you, the original purchaser of this new
DX-LTDVD22-09 (“Product”), that the Product shall be free of defects in the
original manufacture of the material or workmanship for a period of one (1)
year from the date of your purchase of the Product (“Warranty Period”). This
Product must be purchased from an authorized dealer of Dynex brand
Products and packaged with this warranty statement. This warranty does not
cover refurbished product. If you notify Dynex during the Warranty Period of
a defect covered by this warranty that requires service, terms of this warranty
apply.
How long does the coverage last?
The Warranty Period lasts for one year (365 days) from the date you
purchased the Product. The purchase date is printed on the receipt you
received with the Product.
What does this warranty cover?
Contact Dynex:
For customer service please call 1-800-305-2204
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645
© 2008 Best Buy Enterprise Services, Inc.
All rights reserved. DYNEX is a trademark of Best Buy Enterprise Services, Inc.
Registered in some countries. All other products and brand names are
trademarks of their respective owners.
During the Warranty Period, if the original manufacture of the material or
workmanship of the Product is determined to be defective by an authorized
Dynex repair center or store personnel, Dynex will (at its sole option): (1)
repair the Product with new or rebuilt parts; or (2) replace the Product at no
charge with new or rebuilt comparable products or parts. Products and parts
replaced under this warranty become the property of Dynex and are not
returned to you. If service of products and parts are required after the
Warranty Period expires, you must pay all labor and parts charges. This
warranty lasts as long as you own your Dynex Product during the Warranty
Period. Warranty coverage terminates if you sell or otherwise transfer the
Product.
Copyrights
This product incorporates copyright protection technology that is protected by method
claims of certain US patents and other intellectual property rights owned by
Macrovision Corporation & other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
How to obtain warranty service?
If you purchased the Product at a retail store location, take your original
receipt and the Product to the store you purchased it from. Make sure that
you place the Product in its original packaging or packaging that provides the
same amount of protection as the original packaging. If you purchased the
Product from an online web site, mail your original receipt and the Product to
the address listed on the web site. Make sure that you put the Product in its
original packaging or packaging that provides the same amount of
protection as the original packaging.
Dolby Laboratories
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
To obtain in-home warranty service for a television with a screen 25 inches or
larger, call 1-888-BESTBUY. Call agents will diagnose and correct the issue
over the phone or will have an Dynex-approved repair person dispatched to
your home.
Where is the warranty valid?
DTS Digital Out™
This warranty is valid only to the original purchaser of the Product in the
United States, Canada, and Mexico.
Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide
patents issued and pending. DTS and DTS Digital Out are registered trademarks and the
DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights
Reserved.
What does the warranty not cover?
This warranty does not cover:
•
•
•
•
•
•
•
•
•
•
•
•
Customer instruction
Installation
Set up adjustments
Cosmetic damage
Damage due to acts of God, such as lightning strikes
HDMI™
Accident
Misuse
Your TV incorporates HDMI™ technology. HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Abuse
Negligence
Commercial use
Modification of any part of the Product
Plasma display panel damaged by static (non-moving) images
applied for lengthy periods (burn-in).
HDTV
The “HDTV” logo is a trademark of CEA.
This warranty also does not cover:
•
•
•
Damage due to incorrect operation or maintenance
Connection to an incorrect voltage supply
Attempted repair by anyone other than a facility authorized by Dynex
to service the Product
HIGH-DEFINITION TELEVISION
•
•
•
Products sold as is or with all faults
Consumables, such as fuses or batteries
Products where the factory applied serial number has been altered or
removed
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
08-1371
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave. South, Richfield, MN 55423 U.S.A.
© 2008 Best Buy Enterprise Services, Inc. All rights reserved.
DYNEX is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries. All other
products and brand names are trademarks of their respective owners.
Download from Www.Somanuals.com. All Manuals Search And Download.
|