INSTRUCTION MANUAL
Self Leveling
Vertical Line
Generator
• Melbourne • Perth
• Auckland • Hong Kong
• Shanghai • Taipei
• New York • Verona
• London • Paris
LSSLV
wnload from Www.Somanuals.com. All Manuals Searc0h40A7n02dEDD0o4wnlo
SF
Full 2 Years Home Use Warranty
Contents
Whilst every effort is made to ensure your complete satisfaction with
this tool, occasionally, due to the mass manufacturing techniques, a
tool may not live up to our required level of performance and you may
need the assistance of our service department.
Warranty
2
3
3
3
3
4
4
6
7
7
7
8
8
9
9
Introduction
This product is warranted for a 2-year period for home domestic use
from the date of the original purchase. If found to be defective in
materials or workmanship, the tool or the offending faulty component
will be replaced free of charge with another of the same item. A small
freight charge may apply.
Environmental protection
Scope of product
Description of symbols
Safety rules for laser line generator
Additional safety rules for laser line generator
Know your product
The warranty replacement unit is only made available by returning the
tool to the place of purchase with a confirmed register receipt. Proof
of purchase is essential. We reserve the right to reject any claim where
the purchase cannot be verified.
Changing the laser line generator batteries
Operating the laser line generator
Selecting the mounting method
Projection of a vertical laser line on the floor
Projection of laser line when fixed on a wall
Maintenance
This warranty does not include damage or defects to the tool caused
by or resulting from abuse, accidents, alterations or commercial or
business use.
It also does not cover any bonus accessories unless the tool is a GMC
Platinum Professional model.
Please ensure that you store your receipt in a safe place.
Conditions apply to the above warranty.
Troubleshooting
If you need direction of what constitutes a free of charge warranty
claim, please review the guide given on the rear of the Receipt Holder.
An indication is given as to the types of claim that are permissible,
and those that are not.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Dear Customer
Description of symbols
The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
If you require any help with your product, whether it is a Warranty
claim, spare part or user information, please phone our Help Line for
an immediate response. Phone 1300 880 001 in Australia or
0800 445 721 in New Zealand.
Conforms to relevant standards for
electromagnetic compatibility.
Introduction
Do not stare into beam. Only turn laser beam on when tool is on
work piece. Class 2 laser product.
Your new GMC laser hand tool will more than satisfy your expectations.
It has been manufactured under stringent GMC Quality Standards to
meet superior performance criteria.
Specifications
You will find your new tool easy and safe to operate, and, with proper
care, it will give you many years of dependable service.
Recommended Use:
Length of laser line:
Laser diode type:
Laser class:
Indoor
Up to 10m
Caution. Carefully read through this entire Instruction Manual before
using your new GMC laser hand tool. Take special care to heed the
Cautions and Warnings.
Red laser diode 635 - 650nm
Class 2, maximum power output less than or equal to 1mW
Operation area:
Up to 10m distance
100°
Your GMC laser hand tool has many features that will make your job
faster and easier. Safety, performance, and dependability have been
given top priority in the development of this tool, making it easy to
maintain and operate.
Laser fan beam angle:
Self-leveling range:
Leveling time:
+/- 3°
<5 second
Vertical line accuracy (end to end): +/-3.1mm at 4.8 metres
Environmental protection
Line width accuracy:
Power supply:
<3.1mm at 4.8 metres
Recycle unwanted materials instead of disposing of them
as waste. All tools, hoses and packaging should be sorted,
taken to the local recycling centre and disposed of in an
environmentally safe way.
2 x AA 1.5 volt batteries (not supplied)
40 hours typical of continuous use with alkaline batteries
-1°C to 40°C
Battery life:
Operation temperature:
CAUTION. Laser radiation is emitted from the line generator.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Safety rules for self leveling vertical line generators
The self leveling vertical line generator is Class 2 with maximum 1mW and
635 - 650nm wavelengths. These lasers do not normally present an optical
hazard, although staring at the beam may cause flash blindness.
Additional safety rules for self leveling vertical line
generators
The self leveling vertical line generator emits a laser fan beam, which acts
like an invisible surface in the actual three dimensions space. When used
indoors, it generates a visible laser line on the surfaces the laser fan beam
crosses.
Warning. Do not stare directly at the laser beam.
A hazard may exist if you deliberately stare into the beam, please observe
all safety rules as follows;
The self leveling vertical line generator is a Class 2 laser tool and complies
with Australian standards, AS 2397 and AS/NZS2211.
• The laser shall be used and maintained in accordance with the
manufacturer’s instructions.
WARNING. Read and understand all instructions. Failure to follow all
instructions may result in hazardous radiation exposure, electric shock, fire
and/or bodily injury.
•
•
Never aim the beam at any person or an object other than the work piece.
The laser beam shall not be deliberately aimed at personnel and shall be
prevented from being directed towards the eye of a person for longer than 0.25s.
• Do not remove or deface any labels. Removing labels increases the risk of
exposure to laser radiation.
•
•
Always ensure the laser beam is aimed at a sturdy work piece without
reflective surfaces. I.e. wood or rough coated surfaces are acceptable.
Bright shiny reflective sheet steel or the like is not suitable for
laser use as the reflective surface could direct the beam back at
the operator.
Do not change the laser light assembly with a different type.
Repairs must only be carried out by the laser manufacturer or
• Do not stare directly at the laser beam as serious eye injury could result.
• Do not project the laser beam directly into the eyes of others.
• Do not place the laser in a position which may cause anyone to stare
into the laser beam intentionally or unintentionally.
• Do not use optical tools such as a telescope or transit to view the laser
beam.
an authorised agent.
LSSLV Self Leveling
• Do not operate the self leveling vertical line generator around children or
allow children to operate the tool.
CAUTION: Use of controls or adjustments or performance
of procedures other than those specified herein may result
in hazardous radiation exposure.
Vertical Line Generator
• Keep children and bystanders away while operating the self leveling
vertical line generator.
Please refer to the relevant Australian standards, AS 2397
and AS/NZS2211 for more information on Lasers.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
• Turn the self leveling vertical line generator off when it is not in use.
Leaving the laser on increases the risk of staring into the laser beam.
Know your product
This REDEYE® self leveling vertical line generator is a high quality tool.
It can be leveled on a horizontal surface or tripod stand. It projects an
vertical laser line.
• Do not operate the self leveling vertical line generator in explosive
atmospheres, such as in the presence of flammable liquids, gases, or
dust.
This tool is easy to use in many applications from simple home decorating
projects to house building. Every place it can project an vertical line
adjusted automatically while it’s placed on a horizontal surface.
• Position the self leveling vertical line generator securely. Damage to the
self leveling vertical line generator or some injury could result if the unit
falls.
This REDEYE® self leveling vertical line generator is not calibrated as a
height measuring device and should not be used as such. It will give a
reference mark when used as a hand-held tool.
• Use only accessories that recommended by the manufacturer for
your model. Accessories that may be suitable for a specific laser line
generator, may create a risk of injury when used on another self leveling
vertical line generator.
1. On/Off switch
2. Bubble vial
1
2
• Repairs and servicing can be only performed by a qualified repair facility.
Repairs performed by unqualified personnel could result in serious injury.
3. Battery cover
4. Vertical adjusting dial
5. Laser aperture
6. Tripod mount
• Do not disassemble the self leveling vertical line generator. Disassembling
the unit will void all warranties on the product.
• Do not disassemble any part of the product except removing the batteries
cap when replacing batteries.
5
• Do not modify the product. Modifying the product in any way may result
in hazardous laser radiation exposure.
• Use of control or performance of procedures other than those specified in
this manual may result in hazardous laser radiation exposure.
3
• Keep work area clean and well lit. Cluttered and dark areas invite
accidents.
6
4
Download from Www.Somanuals.com. All Manuals Search And Download.
8
9
Changing the self leveling vertical line generator
batteries
Operating the self leveling
vertical line generator
1. Ensure that the self leveling
vertical line generator is
switched OFF by checking that
the laser switch (1) is in the
“0” position
1. To switch the self leveling vertical
line generator on, push the laser
switch (1) forward until it stops
in “1” position.
2. To swtich the self leveling vertical
line generator OFF, push the
switch backward until it stops in
“0” position.
2. Unclip the battery cover (3).
3. Remove and replace both AA
batteries, taking care to insert
the new batteries with the
correct polarity.
WARNING: When turning on the self leveling
vertical line generator ALWAYS be aware of
protecting the eyes of yourself and those
around you. NEVER point the self leveling
vertical line generator at anyone’s face,
including your own.
4. Replace the battery cover (3) and shut the cover back to the position in
place.
CAUTION. Remove the self leveling vertical line generator when the tool
is to be stored without use for a few days or more. If left in position, the
batteries might leak and damage the laser light assembly. Damage due to
leaking batteries is not covered under warranty.
Failure to heed this warning could result in
serious injury.
Before using the self leveling vertical line
generator, it is important to ensure that the
unit is leveled.
1. Place the unit on a flat surface and check
the bubble vial (2). If the air bubble is
located inside the black circle, then you
can proceed.
Download from Www.Somanuals.com. All Manuals Search And Download.
10 11
If the air bubble is outside of the black circle, follow these recommend
adjustment steps:
Suggestion: A tripod with an adjustable plate may be the best tool to use,
to ensure the self leveling vertical line generator is in a level position.
•
It is important to check if the unit has been placed on a level surface.
Caution: Ensure the switch is in “0” position during adjustment.
The diagrams below illustrate the correct positioning of the unit.
Projecting Level Vertical Laser Line
•
•
If the unit is relatively flat, you can use the adjustment dial (4) to make
adjustment only on the vertical plane.
When the self leveling
vertical line generator is
located in level position:
If the surface is not flat on a horizontal plain, you have a few options:
•
•
Use a flat piece of material (books, block of timber)
Use a tripod
• Ensure the laser
aperture (5) of the
tool faces the wall
which will be used for
projecting the laser
“chalk line”.
• Switch on the self leveling vertical line generator, you will see the vertical
laser line swaying on the wall, whilst it automatically adjusts itself.
This process will take approximately 5 seconds where you will see
eventually a steady vertical laser “chalk line”.
• Once the vertical laser “chalk line” has steadied, position the “chalk
line” to your target position.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
13
10.DO NOT modify the tool in any way or use the tool with
products and/or accessories not specified in this instruction manual, this
could expose the user to hazardous laser radiation exposure.
Maintenance
This product has been designed to be a low-maintenance tool. However, in order
to maintain its performance, you must ALWAYS follow these simple directions.
11.DO NOT attempt to change any part of the laser lens.
1. ALWAYS handle the tool with care. Treat it as you would any optical
device, such as a camera or binoculars.
NOTE: This tool is not to be tampered with and should only be repaired by
a qualified Service Technician with laser experience.
2. AVOID exposing the self leveling vertical line generator to shock,
continuous vibration or extreme hot or cold temperatures.
Troubleshooting
3. ALWAYS store the self leveling vertical line generator indoors. When
not in use, ALWAYS store the self leveling vertical line generator in its
protective case.
Problem
Possible cause
Solution
Batteries are weak.
Replace with fresh batteries.
Laser line
projection is
weak.
4. When you are finished using the tool, ALWAYS make sure that the switch
is in “0” position.
5. ALWAYS keep the product free of dust and liquids. Use a damp cloth and
mild soap to clean the tool. If needed, ONLY USE a soft cloth or cotton
swab and glass cleaner to clean the lens.
Light in area is too
bright.
Use laser enhancing glasses.
Replace with fresh batteries.
Laser line is
hard to see
Batteries are weak.
WARNING: ALWAYS remove the batteries when cleaning lens.
6. ALWAYS clean and thoroughly dry the tool after each use.
Power switch is not
“on”
Check to be sure the power
switch has been pushed
forward and is in the “1”
position.
Laser light is
not projected.
7. Check the batteries regularly to avoid deterioration. ALWAYS remove
the batteries from the tool, if it is not going to be used for an extended
period of time.
8. Replace the batteries after approximately 40 hours of use.
The tool is not placed
on a horizontal surface
or the declining angle
of it is beyond ±3°.
Replace the tool on a
Laser line
projected is
not upright.
horizontal surface and make
sure the laser line can sway
after the tool is turned on.
9. DO NOT disassemble the self leveling vertical line generator.. This will not
only void the warranty, but could expose the user to hazardous radiation
exposure.
Download from Www.Somanuals.com. All Manuals Search And Download.
14 15
|