®
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
1
Introduction
2
3
Operation Notes
Features
4
Panel Layout
5
6
7
Panel Descriptions
Panel Descriptions
Front Panel Buttons
7
Navigation
7
9
9
Input Selection
Using The A/V Cinema Scaler Pro - Main LCD
LCD Screen
10
10
12
12
13
14
14
15
15
15
16
17
17
18
18
19
20
A/V Cinema Scaler Pro - Initial Startup
Powering On
A/V Cinema Scaler Pro - Main Screen
Main Display
Input Resolutions
Audio Input Type
Audio Formats
Sampling Rates
Number Of Channels
Output Screen
Surround Processing
Dynamic Range Compression
Reference Level Compensation
DVI Output Type
HDMI EDID Type
Audio Input Type
Product Title
21 A/V Cinema Scaler Pro - Configuration
21
22
23
24
25
25
25
26
26
28
29
29
29
30
30
30
31
32
33
Main Features Menu
A/V Cinema Scaler Pro - Picture Adjust
Mode
Contrast
Brightness
Hue
Saturation
Sharpness
Aspect Ratio
Noise Reduction
Horizontal Position
Vertical Position
Clock
Phase
Exit Picture Adjust
A/V Cinema Scaler Pro - Color Adjust
Color Temp
Red
Green
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
33
33
34
34
34
35
35
36
36
36
37
37
38
38
38
39
40
40
40
41
41
Blue
Exit Color Adjust
A/V Cinema Scaler Pro - Lipsync Delay Adjust
Lipsync Delay
Exit Lipsync Adjust
A/V Cinema Scaler Pro - Surround Delay Adjust
Surround Right Delay
Rear Surround Right Delay
Rear Surround Left Delay
Exit Lipsync Adjust
A/V Cinema Scaler Pro - Output Selection
Output Timing 1080P
Output Timing 2K
Exit Output Selection
A/V Cinema Scaler Pro - On Screen Display Adjust
Horizontal Position
Vertical Position
Timeout
Background
Exit OSD Adjust
A/V Cinema Scaler Pro - Firmware
42 DB-25 Audio Input & Bypass Mode
42
42
A/V Cinema Scaler Pro - DB-25 Audio Bypass Mode
Enabling Bypass Mode
43 Analog Input And Output Pinout
44
44
Analog DB-25 Output
Analog DB-25 Input
45 RS-232 Serial Control Interface
45 RS-232 Settings
46 RS-232 Serial Control Commands
48 Rack Mount / Tabletop Installation
49 Specifications
52 Warranty
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Congratulations on your purchase of the A/V Cinema Scaler Pro. Your complete
satisfaction is very important to us.
Gefen
Gefen delivers innovative, progressive computer and electronics add-on solutions
that harness integration, extension, distribution and conversion technologies.
Gefen’s reliable, plug-and-play products supplement cross-platform computer
systems, professional audio/video environments and HDTV systems of all sizes
with hard-working solutions that are easy to implement and simple to operate.
The Gefen A/V Cinema Scaler Pro
The Gefen Cinema Scaler is a video and audio device that can accomplish a
unique variety of video scaling and audio conversion tasks. Any signal can be
scaled and displayed with total end user control. An On-screen display (OSD)
and full featured settings allow you to fine-tune your viewing experience and get
the most out of your current A/V setup.
How It Works
Simply connect your analog or digital A/V sources to the Gefen Cinema Scaler.
Using the OSD menu system and controls, select your desired input and
resolution, audio processing needs, and other adjustments. The Cinema Scaler
will brilliantly scale your image to your digital cinema projector or DVI /HDMI
display.
Note: This unit is fully HDCP compliant.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION NOTES
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE A/V CINEMA SCALER PRO
•
•
Audio from the analog DB-25 input is available in bypass mode only. No
video will be output when using the bypass mode.
Audio connection for each input is selectable between analog and digital.
Selection of the audio input type is selectable using the front panel LCD
menu system. For more information please see page 18.
•
•
Coaxial/Optical Digital Audio Format Support
2 Channel LPCM:
Multi-Channel AC-3
32kHz – 96kHz
1-6 Channels Bitstream
HDMI Digital Audio Format Support
2 Channel LPCM
Multi-Channel AC-3
8 Channel LPCM
32kHz – 96kHz
1-6 Channels Bitstream
32kHz - 96kHz
•
•
Audio Processing
Dolby Pro Logic II *All analog/digital (No DB-25) inputs.
(See page 16 for a detailed description of this feature)
Maximum supported video input formats
DVI-D:
DVI-I:
Maximum resolution 1920x1200/60Hz
Maximum resolution 1920x1200/60Hz (both analog and digital)
Component: Maximum resolution 1920x1080/60Hz
VGA:
HDMI:
Maximum resolution 1920x1200/60Hz
Maximum resolution 1920x1080/60Hz
•
Supported video output formats:
Digital:
Analog:
1920x1080p 24/50/60Hz and 2K (2048x1080p 24/50/60Hz)
1920x1080p 24/50/60Hz and 2K (2048x1080p 24/50/60Hz)
23.97/24/50/60Hz passthrough is supported via all inputs. (Detailed timings
can be found on page 13)
•
•
Supported audio output formats:
Analog:
8 channel discrete (balanced over DB-25)
This product is fully HDCP compliant
2
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1 DVI-I video + analog or digital audio inputs
1 DVI-D video + analog or digital audio inputs
2 Component video + analog or digital audio inputs
VGA + analog or digital audio input
HDMI input
DB-25 analog audio input (7.1 discrete, balanced)
Support resolutions of 1920x1080p 60Hz and 2048x1080p 60Hz
Selectable digital or analog audio input for each source (except HDMI)
Front panel source selection with “bypass” mode for DB-25 pass-through
RS-232 for optional firmware updates/external control
LCD screen for scaling preferences & audio settings
Audio delay for precise video synchronization
Capable of “black barring”/stretching 4:3 aspect ratio
Floating balanced audio outputs with separate power supply for avoiding
ground loop issues.
Package Includes
(1) Cinema Scaler Pro I unit
(1) 12V DC Power Supply
(1) Set of Rack Ears
(1) User’s Manual
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PANEL LAYOUT
Front Panel
4
4
4
2
2
2
1
3
1
5
1
6
7
8
9
Back Panel
4
2
4
10
11
1
12
1
3
13
14 15
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PANEL DESCRIPTIONS
1
2
Analog L+R RCA Audio Input
This input will accept 2 channel analog audio using 1 pair of RCA analog audio
type connectors. There is a set of connectors available for all inputs except for
the HDMI and DB-25 inputs. For a listing of accepted audio formats please see
page 14.
Digital Optical Audio Input (TOSLINK)
This input will accept multi-channel digital audio using 1 optical type connector.
There is a connector available for all inputs except for the HDMI, Component 2,
and DB-25 inputs. For a listing of accepted audio formats, including supported
audio channels, please see page 14-15.
3
4
Component Video Input
This input will accept component video (YPbPr) via 3 RCA type connectors.
There is one set of connectors located on the front and back panels. For a listing
of accepted resolutions please see page 13.
Digital Coaxial Audio Input (S/PDIF)
This input will accept multi-channel digital audio using 1 RCA type connector.
There is a connector available for all inputs except for the HDMI and DB-25
inputs. For a listing of accepted audio formats, including supported audio
channels, please see page 14-15.
5
6
VGA Video Input
This input will accept VGA video (RGBHV) via a HD-15 type connector. For a
listing of accepted resolutions please see page 13.
DVI-I Video Input
This input will accept DVI-I video (RGB analog or digital) via a DVI-I type
connector. Input format is automatically determined. For a listing of accepted
resolutions please see page 13.
7
HDMI Input
This input will accept an HDMI (RGB,YCbCr) signal via an HDMI type A
connector. Audio and video are both supported by this connector. For a listing of
accepted resolutions and audio formats please see page 13.
8
9
High Contrast LCD Display
This display will show pertinent information for configuration control and status.
For information on how to use this display please see page 12-19.
Navigation and Input Selection Buttons
These buttons are used to select the desired input source. Navigation buttons
are also provided for easy user navigation and configuration of features. Please
see page 7 for more information.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
PANEL DESCRIPTIONS
10 DVI-D Output
This input will accept DVI-D (RGB digital) capable display device via a DVI-I
type connector. This output port will support displays that are capable of
accepting the two output resolutions; 1080p and 2K.
11 7.1 Channel Analog Audio Output
This output will accept a DB-25 type connector to connect to a multi-channel
analog audio device. This port is always active. All audio from each input will be
converted and output through this port. For pin-out information please see page
42-43.
12 DVI-D Input
This input will accept DVI-D video (digital) via a DVI-I type connector. Input
format is digital only. For a listing of accepted resolutions please see page 13.
13 7.1 Channel Analog Audio Input
This input will accept a DB-25 type connector for multi-channel analog audio
input. This port is only active when the bypass mode is selected (page 41). For
pin-out information please see page 42-43.
14 RS-232 Serial Control Interface
This port is used for serial communication for multiple functions. Access to
certain features are only through the RS-232 interface.
15 12V DC Power Receptacle
This port will accept power via the included 12V DC power supply. This is a
locking type connector.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
FRONT PANEL BUTTONS
The front panel buttons are used for navigation, configuration, and input selection.
The directional buttons (◄▲►▼) are used to navigate the user menus system. The
Select button is used to confirm menu and item selections.
The Menu button is used to enter the configuration menu .
The Exit button is used to exit the configuration menu at any time.
INPUT SELECTION
The desired input port can be directly selected using the front panel input buttons.
Simply press the desired input button. Source changing can take up to 10 seconds
(longer when syncing digital video signals).
The bypass button will enable bypass mode (page 41).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING AND OPERATING THE A/V CINEMA SCALER PRO
INSTALLING THE A/V CINEMA SCALER PRO
1. Connect video source devices to the A/V Cinema Scaler Pro’s video inputs.
The following inputs are available:
Front Panel
HDMI
DVI-I (analog and digital DVI)
VGA
Component
Back Panel
DVI-D (digital DVI)
Component
NOTE:
2. Connect audio sources to the A/V Cinema Scaler Pro’s audio inputs. The
following inputs are available:
Front Panel
HDMI:
Embedded audio
DVI-I:
Component:
VGA:
Analog RCA L+R or Digital TOSLINK or S/PDIF
Analog RCA L+R or Digital TOSLINK or S/PDIF
Analog RCA L+R or Digital TOSLINK or S/PDIF
Back Panel
DVI-D:
Component:
DB-25:
Analog RCA L+R or Digital TOSLINK or S/PDIF
Analog RCA L+R or Digital S/PDIF
Analog multi-channel audio. Please see
page 42-43 for specific pin-out information
NOTE: All inputs, except for HDMI, is able to accept both analog and digital
audio sources. Therefore, each input has a selector option in the OSD that will
allow the user to choose which type of audio is used.
3. Connect the DVI capable output device to the A/V Cinema Scaler Pro’s DVI-I
input.
NOTE: This output is a DVI-I connector. Analog or digital type video can
be output through this connector. Selection of the output format can be
accomplished by using either the OSD (on-screen display) or the front panel
LCD and buttons. Please see page 17 for instructions on how to change the DVI
output type.
4. Connect the analog DB-25 audio output to the analog DB-25 input on the
appropriate audio device.
5. Connect the included 12V power supply between the A/V Cinema Scaler Pro
and an open power socket. Ensure that the input cable is properly secured
to the unit.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE A/V CINEMA SCALER PRO - MAIN LCD
A/V CINEMA SCALER PRO - NAVIGATION
The A/V Cinema Scaler Pro uses a series of buttons, located on the front panel,
for all input selection and feature functions. All status information, such as
the input and output resolutions, are always available on the front panel LCD
Screen. User adjustable features, such as color correction and aspect ratio, can
be navigated and adjusted by referencing either the LCD Screen or the On-
Screen Display (OSD).
All menu navigation and adjustments are accomplished by using the front panel
buttons. Please review the front panel buttons below.
For a full description of each of these buttons please see the descriptions on
page 7.
LCD SCREEN
The LCD Screen displays status information and can also be used to navigate
and adjust functions on the A/V Cinema Scaler Pro. This display is a high
contrast 2-line/16-character LCD. It will display information like in the example
below.
Main Screen
9
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE A/V CINEMA SCALER PRO - MAIN LCD
A/V CINEMA SCALER PRO - INITIAL STARTUP
POWERING ON
Once all video and audio connections have been made and the power supply
has been connected, the A/V Cinema Scaler Pro should automatically turn on.
The front panel LCD should indicate this by displaying the text:
Product Title
This screen should be displayed for 3 seconds while the system is booting. Once
this is complete, the Main Screen should appear.
There are 7 different information panes that are available to provide the user with
useful information. These are the Product Title Main Screen Output Screen,
Surround Processing, DVI Output Type, HDMI EDID Type, and Audio Input
Type information panes. Please use the ▲ and ▼ buttons to cycle through the
different information panes. The cycling order is displayed on the next page.
NOTE: The Audio Input Type pane will not be available when the HDMI input is
selected.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE A/V CINEMA SCALER PRO - MAIN LCD
Product Title
Main Screen
Output Screen
Surround Processing Screen
Dynamic Range Control Screen
Reference Level Compensation
Screen
DVI Output Type Screen
HDMI EDID Type Screen
Audio Input Type Screen
11
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE A/V CINEMA SCALER PRO - MAIN LCD
A/V CINEMA SCALER PRO - MAIN SCREEN
MAIN DISPLAY
The Main Screen will display useful information to the user. It displays the
currently selected input port and audio input format. The currently used output
format can also be displayed by pressing the ▼ button. Pressing the ◄ or ►
buttons while on this screen will have no effect. Please see below for the Main
Screen layout.
Selected Input
Input Resolution
Main Screen
Input Audio
Type
Audio
Format
Sampling
Rate
Number of
Channels
SELECTED INPUT
This portion of the screen will display the currently selected input. The available
inputs, labels, and associated buttons are listed below:
LCD Display
Name
Front Panel
Button
Actual Input
Location
COMP1
PC
Component
VGA
Front Panel
Front Panel
Front Panel
Front Panel
Back Panel
Back Panel
COMP1
VGA
DVI-D1/DVI-A1
HDMI
DVI-I
DVI1
HDMI
HDMI
COMP2
DVI2
COMP2
DVI-D2
Component
DVI-D
12
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE A/V CINEMA SCALER PRO - MAIN LCD
INPUT RESOLUTIONS
This portion of the screen will display the currently selected input’s resolution.
The acceptable resolutions for each input type are listed below.
Input
Format
Resolution
480i/p
Frequency
59/60Hz
576i/p
50Hz
Component
YPbPr
720p
50/60Hz
1080i/p
25/29.97/30/50/59.97/60Hz
VGA (640x480)
SVGA (800x600)
XGA (1024x768)
1152x864
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
59/60Hz
50Hz
50/60Hz
SXGA (1280x1024)
1280x960
PC (VGA)
RGBHV
WXGA (1280x800)
WXGA (1360x768)
UXGA (1600x1200)
WUXGA (1920x1200)
VGA (640x480)
SVGA (800x600)
XGA (1024x768)
1152x864
RGBHV
or
RGB
SXGA (1280x1024)
1280x960
DVI-I (analog
and digital)
WXGA (1280x800)
WXGA (1360x768)
UXGA (1600x1200)
WUXGA (1920x1200)
480i/p
576i/p
DVI-D & DVI-I
(Digital Only) &
HDMI
RGB
or YCbCr
720p
23.97/24/25/29.97/30/50/59.
97/60Hz
1080i/p
NOTE: 23.97/24/50/60Hz signal are pass-through. No framerate conversions will
be applied.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE A/V CINEMA SCALER PRO - MAIN LCD
AUDIO INPUT TYPE
This portion of the screen will display the currently selected input’s audio type. All
inputs, except for HDMI, will accept both an analog and digital type audio signals.
The user can choose which type of audio is selected by using the Audio Input
Type pane Each input’s audio type, except for HDMI, can be user selected. This
is not available in bypass mode.
Input
Audio Input Type
Analog (L+R RCA)
Digital (S/PDIF)/(TOSLINK)
LCD Display (Audio Type)
A
D
A
D
A
D
D
A
D
A
D
COMP1
Analog (L+R RCA)
VGA
Digital (S/PDIF)/(TOSLINK)
Analog (L+R RCA)
DVI1
HDMI
Digital (S/PDIF)/(TOSLINK)
Digital (S/PDIF)
Analog (L+R RCA)
Digital (S/PDIF)
COMP2
Analog (L+R RCA)
Digital (S/PDIF)/(TOSLINK)
DVI2
This portion of the screen will display the currently selected input’s audio format.
When the input’s audio type selector switch is set to analog, the display will only
read “Stereo”; Sampling rate and number of channels will not be displayed. This
does not cover the bypass mode.
Input
Audio Input Type
Analog (L+R RCA)
Digital (S/PDIF)/(TOSLINK)
Supported Audio Formats
Stereo
COMP1
PCM /
PCM /
(Dolby Digital)
Stereo
(Dolby Digital)
Stereo
Analog (L+R RCA)
VGA
Digital (S/PDIF)/(TOSLINK)
Analog (L+R RCA)
DVI1
HDMI
Digital (S/PDIF)/(TOSLINK)
PCM /
PCM /
(Dolby Digital)
(Dolby Digital)
Digital (S/PDIF)
Analog (L+R RCA)
Digital (S/PDIF)
Stereo
(Dolby Digital)
Stereo
(Dolby Digital)
COMP2
PCM /
PCM /
Analog (L+R RCA)
Digital (S/PDIF)/(TOSLINK)
DVI2
Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE A/V CINEMA SCALER PRO - MAIN LCD
SAMPLING RATES
This portion of the screen will display the currently selected input’s audio
sampling rate. This will only display information when the input audio type is
digital. This does not cover the bypass mode.
Input
COMP1
VGA
Audio Input Type
Digital (S/PDIF)
Digital (S/PDIF)
Digital (S/PDIF)
Embedded Digital
Digital (S/PDIF)
Digital (S/PDIF)
Supported Sampling Rates
32KHz-96KHz
32KHz-96KHz
DVI1
32KHz-96KHz
HDMI
COMP2
DVI2
32KHz-96KHz
32KHz-96KHz
32KHz-96KHz
NUMBER OF CHANNELS
This portion of the screen will display the number of audio channels that are
being used by the currently selected input. This will only display information when
the input audio type is digital. This does not cover the bypass mode.
Supported
Digital) Channels
(Dolby
Supported PCM
Channels
Input
Audio Input Type
COMP1
VGA
Digital (S/PDIF)
Digital (S/PDIF)
Digital (S/PDIF)
Embedded Digital
Digital (S/PDIF)
Digital (S/PDIF)
Up to 2
Up to 2
Up to 2
Up to 8
Up to 2
Up to 2
Up to 6 (5.1)
Up to 6 (5.1)
Up to 6 (5.1)
Up to 6 (5.1)
Up to 6 (5.1)
Up to 6 (5.1)
DVI1
HDMI
COMP2
DVI2
Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.
OUTPUT SCREEN
Pressing the ▼ button when the Main Screen is displayed will take the user to
the Output Screen. This screen is provided to easily determine and change the
current output resolution setting.
Output Screen
Output Timing
15
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE A/V CINEMA SCALER PRO - MAIN LCD
This A/V Cinema Scaler Pro supports only two output resolutions
Output
1080P60
2K
Resolution
1920x1080 60Hz
2048x1080 60Hz
The user has the option of changing the output resolution from the Output
Screen. Use the ◄ or ► buttons to immediately change the output resolution.
Pressing the ▲ button will return the user to the Main Screen. Pressing the ▼
will cycle the user to the Product Title screen.
NOTE: 1080p 24Hz is supported and will be passed through as either 1080p
24Hz or 2K 24Hz depending on the selected output resolution.
SURROUND PROCESSING
This unit features Dolby Pro Logic II surround sound processing. Dolby Pro
Logic II processes any high quality stereo signal source into five separate full
frequency channels. Dolby Pro Logic II also decodes 5 channels from stereo
signals encoded in traditional four-channel Dolby Surround or five-channel Dolby
Pro Logic II.
This screen will display the current status of the surround processing mode.
Pressing the ▲ button will return the user to the Output Screen. Pressing the ▼
will cycle the user to the DVI Output Type screen.
The user has the option of changing the processing mode from the Surround
Processing screen. Use the ◄ or ► buttons to immediately change the
processing mode on or off.
NOTE: When the processing mode is set to ON, it will only have an affect on 2
channel analog and digital sources.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE A/V CINEMA SCALER PRO - MAIN LCD
DYNAMIC RANGE COMPRESSION
Dynamic Range Compression (DRC) is a feature that will apply compression of
loud sounds over a certain threshold while quiet sounds remain untreated. This
feature is useful for reducing loud noises that will overpower quieter sounds.
This screen will display the current DRC state. Pressing the ▲ button will return
the user to the Surround Processing screen. Pressing the ▼ will cycle the user
to the RLC screen.
The user has the option of changing the DRC state from this screen. Use the ◄
or ► buttons to immediately change the DRC state.
REFERENCE LEVEL COMPENSATION
Reference Level Compensation (RLC) features attenuation that can be used to
apply a -3dB gain to the front right/left and center channels. This -3dB will be
applied when RLC is on.
This screen will display the current RLC state. Pressing the ▲ button will return
the user to the DVI Output Type screen. Pressing the ▼ will cycle the user to
the DRC screen.
The user has the option of changing the RLC state from this screen. Use the ◄
or ► buttons to immediately change the RLC state.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE A/V CINEMA SCALER PRO - MAIN LCD
DVI OUTPUT TYPE
The DVI output is a DVI-I type which can be connected to either a digital or
analog DVI device. This option will allow the user to change the output type at
anytime. Please note that HDCP protected content will not be output when the
modes is set to DVI-A Analog
This screen will display the currently selected DVI Output Type. Pressing the ▲
button will return the user to the RLC screen. Pressing the ▼ will cycle the user
to the HDMI EDID Type screen.
The user has the option of changing the DVI Output Type from this screen. Use
the ◄ or ► buttons to immediately change the DVI Output Type
NOTE: In accordance with HDCP regulations, protected content will not be
output via the DVI-I port when the DVI Output Type is set to DVI-A Analog.
HDMI EDID TYPE
This option will set the supported LPCM audio channels in the EDID (display/
device information). This will allow the HDMI source device to output up 7.1
channels of LPCM audio or limit it to 5.1 channels.
This screen will display the currently selected HDMI EDID Type. Pressing the ▲
button will return the user to the DVI Output Type screen. Pressing the ▼ will
cycle the user to the Audio Input Type screen.
The user has the option of changing the HDMI EDID Type from this screen. Use
the ◄ or ► buttons to immediately change the HDMI EDID Type
18
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE A/V CINEMA SCALER PRO - MAIN LCD
NOTE: This option will simply set the supported audio formats to include either
5.1 or 7.1 LPCM audio formats. The source must still be able to output these
formats for this option to have any effect.
AUDIO INPUT TYPE
Each input, excluding the HDMI input, supports multiple audio input types. This
option will allow the user to select the desired audio type for each input. For a
complete listing of the supported formats for each input, please see page 14.
This screen will display the currently selected Audio Input Type. Pressing the
▲ button will return the user to the HDMI EDID Type screen. Pressing the ▼ will
cycle the user to the Product Title screen.
The user has the option of changing the Audio Input Type from this screen. Use
the ◄ or ► buttons to immediately change the Audio Input Type
NOTE: This option is not available on the HDMI and Bypass inputs. The
Component 2 input does not have an OPTICAL audio input.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE A/V CINEMA SCALER PRO - MAIN LCD
PRODUCT TITLE
This screen will display the product title. Pressing the ▲ button will return the
user to the Output Screen. Pressing the ▼ will cycle the user to the Main
Screen Pressing the ◄ or ► buttons while on this screen will have no effect.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V CINEMA SCALER PRO - CONFIGURATION
MAIN FEATURES MENU
Once all connections have been made and a valid video input signal is detected,
the Main Features Menu will become available. The following video/audio
adjustment menus will also become available. From any of the information panes
on the Main LCD screen, press the Menu button to enter the Main Features
Menu. Use the ◄ and ► buttons to cycle through the Main Features Menu. The
following illustrates the order of the features and the cycling order.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V CINEMA SCALER PRO - CONFIGURATION
The following are the Main Features Menu items and short descriptions:
Picture Adjust
Color Adjust
Options in this menu include preset video settings and
user adjustable video settings. Items such as brightness,
contrast, and sharpness are found here.
Options in this menu control the appearance of white.
Preset settings are available, as well as a user setting with
manual control.
Lipsync Delay
Surround Delay
This menu will allow the user to apply a lip sync delay that
is input specific. Settings made for one input will not affect
another input.
This menu will allow the user to apply a delay to each
individual surround channel. Right surround, left surround,
rear right surround, and rear left surround channel delay
adjustments can be made. These settings are global
and will affect all output audio, no matter which input is
selected.
Output Selection
OSD Adjust
This menu will control which output resolution is used.
This menu controls options for the on-screen display
system. Items such as OSD-timeout and opacity are found
here.
Firmware
The firmware revision and build date are listed here.
NOTE: The following pages will strictly reference what the LCD Screen displays
when adjusting options. The OSD will mirror the options and functions in the
following sections.
A/V CINEMA SCALER PRO - PICTURE ADJUST
The Picture Adjust menu will allow the user to select predefined picture modes
that will help enhance the final video output. These presets will help by tuning
the output video to compensate for different lighting and viewing environments.
Presets can be bypassed by using the User setting. Once the User setting has
been selected all individual options become modifiable.
To enter the Picture Adjust menu use the ◄ and ► buttons from the Main
Features Menu to select Picture Adjust. Use the ▼ or Select button to enter
the menu. The following page illustrates all possible options that are available in
the Picture Adjust menu for all inputs.
NOTE: Some menu items will be input specific and will not appear in other input
menu. All adjustments in this menu are global for all inputs except Bypass Mode.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V CINEMA SCALER PRO - CONFIGURATION
Menu for HDMI, DVI-D and
DVI-I (Digital Portion) Inputs
Menu for Component Inputs
Menu for VGA and
DVI-I (Analog Portion) Inputs
MODE
The preset picture modes are selectable with this option. Preset contrast,
brightness, hue, saturation, and sharpness settings are stored for each mode.
When the mode is switched to User all individual options will be available for
adjustment.
To cycle between the modes, use the ◄ or ► or Select buttons. The change will
be immediate and no other buttons need to be pressed to confirm the change.
The modes and cycle order is listed on the next page.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V CINEMA SCALER PRO - CONFIGURATION
The preset modes are listed below:
Standard
Movie
Vivid
Useful for general content
Useful for dimly lit environments
Useful for accentuating colors for a more vibrant image
User configured settings
User
Once the User mode is selected, additional options will become available. Use
the ▼ button to select the next option. Use the ▲ option to return to the previous
option.
CONTRAST
This option will set the contrast level for the output video signal.
Press the ◄ or ► or Select buttons to begin adjusting this option. A < and >
character will surround the numerical value to signify that user adjustment can
begin. Use the ◄ and ► to adjust the value of this option. When adjustments are
complete, press the Select button to save. Use the ▼ button to select the next
option. Use the ▲ option to return to the previous option.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V CINEMA SCALER PRO - CONFIGURATION
BRIGHTNESS
This option will set the brightness level for the output video signal.
Press the ◄ or ► or Select buttons to begin adjusting this option. A < and >
character will surround the numerical value to signify that user adjustment can
begin. Use the ◄ and ► to adjust the value of this option. When adjustments are
complete, press the Select button to save. Use the ▼ button to select the next
option. Use the ▲ option to return to the previous option.
HUE
This option will set the hue balance for the output video signal. This option will
not be available when the VGA or DVI-I (Analog portion) input is selected.
Press the ◄ or ► or Select buttons to begin adjusting this option. A < and >
character will surround the numerical value to signify that user adjustment can
begin. Use the ◄ and ► to adjust the value of this option. When adjustments are
complete, press the Select button to save. Use the ▼ button to select the next
option. Use the ▲ option to return to the previous option.
SATURATION
This option will set the saturation level for the output video signal. This option will
not be available when the VGA or DVI-I (Analog portion) input is selected.
Press the ◄ or ► or Select buttons to begin adjusting this option. A < and >
character will surround the numerical value to signify that user adjustment can
begin. Use the ◄ and ► to adjust the value of this option. When adjustments are
complete, press the Select button to save. Use the ▼ button to select the next
option. Use the ▲ option to return to the previous option.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V CINEMA SCALER PRO - CONFIGURATION
SHARPNESS
This option will set the sharpness level for the output video signal. This option will
not be available when the VGA or DVI-I (Analog portion) input is selected.
Press the ◄ or ► or Select buttons to begin adjusting this option. A < and >
character will surround the numerical value to signify that user adjustment can
begin. Use the ◄ and ► to adjust the value of this option. When adjustments are
complete, press the Select button to save. Use the ▼ button to select the next
option. Use the ▲ option to return to the previous option.
ASPECT RATIO
The aspect ratio of the output video is set with this option. There are 5 aspect
ration modes to choose from.
To cycle between the aspect ratio modes, use either the ◄ or ► or Select
buttons. The change will be immediate and no other buttons need to be pressed
to confirm the change. The aspect ratio modes and cycle order is listed below.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V CINEMA SCALER PRO - CONFIGURATION
The aspect ratio modes are listed below:
Full
Stretches the image to fill the screen
Overscan
Stretches the image to just beyond the border of the output
resolution (a portion of the image may be cropped)
Underscan
Stretches the image to just within the border of the output
resolution (a black border will appear around the outside edges)
Letterbox
Panscan
Stretches the image to 16:9 aspect ratio without underscan
Stretches the image to 4:3 aspect ratio without underscan
Please use the examples below do determine which aspect ratio mode should
be used. Please pay attention to the appearance of the circles. All circles
that appear as ovals will result in an output image that appears stretched/
Compressed.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V CINEMA SCALER PRO - CONFIGURATION
Use the ▼ button to select the next option. Use the ▲ option to return to the
previous option.
NOISE REDUCTION
This option will allow the user to apply a noise reduction filter to the component
video input sources. This option will only be available when the input source
is component video. The noise reduction filter reduces noise that commonly
appears in analog video sources. There are 4 settings to choose from.
To cycle between the noise reduction settings, use either the ◄ or ► or Select
buttons. The change will be immediate and no other buttons need to be pressed
to confirm the change. The aspect ratio modes and cycle order are listed below.
The noise reduction modes are listed below:
Off
Noise reduction is off
Low
Low level video noise reduction is applied
Moderate level video noise reduction
Middle
High
High level video noise reduction (may cause a slight ghosting
effect on objects)
Use the ▼ button to select the next option. Use the ▲ option to return to the
previous option.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V CINEMA SCALER PRO - CONFIGURATION
HORIZONTAL POSITION
This option will set the horizontal position of the video image in relation to the
output border. This option is only available when using the VGA or DVI-I (Analog
portion) inputs.
Press the ◄ or ► or Select buttons to begin adjusting this option. A < and >
character will surround the numerical value to signify that user adjustment can
begin. Use the ◄ and ► to adjust the value of this option. When adjustments are
complete, press the Select button to save. Use the ▼ button to select the next
option. Use the ▲ option to return to the previous option.
VERTICAL POSITION
This option will set the vertical position of the video image in relation to the
output border. This option is only available when using the VGA or DVI-I (Analog
portion) inputs.
Press the ◄ or ► or Select buttons to begin adjusting this option. A < and >
character will surround the numerical value to signify that user adjustment can
begin. Use the ◄ and ► to adjust the value of this option. When adjustments are
complete, press the Select button to save. Use the ▼ button to select the next
option. Use the ▲ option to return to the previous option.
CLOCK
This option will adjust the clock timing to enable the user to adjust the video
image. This option is only available when using the VGA or DVI-I (Analog portion)
inputs.
Press the ◄ or ► or Select buttons to begin adjusting this option. A < and >
character will surround the numerical value to signify that user adjustment can
begin. Use the ◄ and ► to adjust the value of this option. When adjustments are
complete, press the Select button to save. Use the ▼ button to select the next
option. Use the ▲ option to return to the previous option.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V CINEMA SCALER PRO - CONFIGURATION
PHASE
This option will adjust the phase to enable the user to adjust the video image.
This option is only available when using the VGA or DVI-I (Analog portion) inputs.
Press the ◄ or ► or Select buttons to begin adjusting this option. A < and >
character will surround the numerical value to signify that user adjustment can
begin. Use the ◄ and ► to adjust the value of this option. When adjustments are
complete, press the Select button to save. Use the ▼ button to select the next
option. Use the ▲ option to return to the previous option.
EXIT PICTURE ADJUST
This option will return the user to the Main Features Menu
To return to the Main Features Menu press the Select button. Pressing the ▼
button will cycle to the Mode option. Use the ▼ button to select the next option.
Use the ▲ option to return to the previous option.
A/V CINEMA SCALER PRO - COLOR ADJUST
The Color Adjust menu will allow the user to select predefined settings for the
appearance of white (color temperature). Presets can be bypassed by using
the User setting. Once the User setting has been selected all individual options
become modifiable.
To enter the Color Adjust menu use the ◄ and ► buttons from the Main
Features Menu to select Color Adjust. Use the ▼ or Select button to enter the
menu. The following page illustrates all possible options that are available in the
Color Adjust menu.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V CINEMA SCALER PRO - CONFIGURATION
COLOR ADJUST MENU OPTIONS
These Options are
only available when
the User mode is
selected
COLOR TEMP
The preset color temperature modes are selectable with this option. Preset red,
green, and blue settings are stored in each mode. When the mode is switched to
User all individual options will be available for adjustment.
To cycle between the modes, use the ◄ or ► or Select buttons. The change will
be immediate and no other buttons need to be pressed to confirm the change.
The modes and cycle order is listed are listed on the following page.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V CINEMA SCALER PRO - CONFIGURATION
The preset color temperature settings are listed below:
Normal
Colors/white will be neutral. White should not have an overly red
or blue appearance.
Warm
Cool
User
Colors/white will have a slightly red appearance.
Colors/white will have a slightly blue appearance.
User configured settings
Once the User mode is selected, additional options will become available. Use
the ▼ button to select the next option. Use the ▲ option to return to the previous
option.
RED
This option will set the amount of red in the output video signal.
Press the ◄ or ► or Select buttons to begin adjusting this option. A < and >
character will surround the numerical value to signify that user adjustment can
begin. Use the ◄ and ► to adjust the value of this option. When adjustments are
complete, press the Select button to save. Use the ▼ button to select the next
option. Use the ▲ option to return to the previous option.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V CINEMA SCALER PRO - CONFIGURATION
This option will set the amount of green in the output video signal.
Press the ◄ or ► or Select buttons to begin adjusting this option. A < and >
character will surround the numerical value to signify that user adjustment can
begin. Use the ◄ and ► to adjust the value of this option. When adjustments are
complete, press the Select button to save. Use the ▼ button to select the next
option. Use the ▲ option to return to the previous option.
BLUE
This option will set the amount of blue in the output video signal.
Press the ◄ or ► or Select buttons to begin adjusting this option. A < and >
character will surround the numerical value to signify that user adjustment can
begin. Use the ◄ and ► to adjust the value of this option. When adjustments are
complete, press the Select button to save. Use the ▼ button to select the next
option. Use the ▲ option to return to the previous option.
EXIT COLOR ADJUST
This option will return the user to the Main Features Menu
This option will return the user to the Main Features Menu. To return to the Main
Features Menu press the Select button. Pressing the ▼ button will cycle to the
Color Temp option. Use the ▼ button to select the next option. Use the ▲ option
to return to the previous option.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V CINEMA SCALER PRO - CONFIGURATION
A/V CINEMA SCALER PRO - LIPSYNC DELAY ADJUST
The Lipsync Delay Adjust menu will allow the user to apply a lip sync delay that
is useful for correcting errors in synchronization between the audio and video.
This delay has a maximum correction time of 80 milliseconds. Each input can
have a separate lip sync adjustment value. This adjustment will not affect audio
delay when in the Bypass Mode.
To enter the Lipsync Delay Adjust menu use the ◄ and ► buttons from the
Main Features Menu to select Lipsync Delay Adjust. Use the ▼ or Select
button to enter the menu. There is only one option in this menu.
This option will set the lip sync delay for the currently selected input.
Pressing the ► or Select buttons will advance the delay by 5 millisecond
increments. Pressing the ◄ button will reduce the delay by 5 milliseconds. The
maximum delay available is 80 milliseconds. Use the ▼ or ▲ button to select the
Exit LipSync Adjust option
EXIT LIPSYNC ADJUST
This option will return the user to the Main Features Menu
This option will return the user to the Main Features Menu. To return to the Main
Features Menu press the Select button. Pressing the ▼ or ▲ button will return
the user to the LipSync Delay option.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V CINEMA SCALER PRO - CONFIGURATION
A/V CINEMA SCALER PRO - SURROUND DELAY ADJUST
The Surround Delay Adjust menu will allow the user to apply a delay to
compensate for the distance between the main and surround audio channels.
Each surround delay has a maximum correction time of 150 milliseconds. The
settings in this menu option are global and will affect the surround channels for
every input. This adjustment will not affect audio delay when in the Bypass Mode.
To enter the Surround Delay Adjust menu use the ◄ and ► buttons from the
Main Features Menu to select Surround Delay Adjust. Use the ▼ or Select
button to enter the menu. The following illustrates all possible options that are
available in the Surround Delay Adjust menu.
SURROUND RIGHT DELAY
This option will set the surround delay for the surround right channel.
When this option is selected, pressing the ► or Select buttons will advance the
delay by 5 millisecond increments. Pressing the ◄ button will reduce the delay
by 5 milliseconds. The maximum delay available is 150 milliseconds. Use the ▼
button to select the next option. Use the ▲ option to return to the previous option.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V CINEMA SCALER PRO - CONFIGURATION
SURROUND LEFT DELAY
This option will set the surround delay for the surround left channel.
When this option is selected, pressing the ► or Select buttons will advance the
delay by 5 millisecond increments. Pressing the ◄ button will reduce the delay
by 5 milliseconds. The maximum delay available is 150 milliseconds. Use the ▼
button to select the next option. Use the ▲ option to return to the previous option.
REAR SURROUND RIGHT DELAY
This option will set the surround delay for the rear surround right channel.
When this option is selected, pressing the ► or Select buttons will advance the
delay by 5 millisecond increments. Pressing the ◄ button will reduce the delay
by 5 milliseconds. The maximum delay available is 150 milliseconds. Use the ▼
button to select the next option. Use the ▲ option to return to the previous option.
This option will set the surround delay for the rear surround left channel.
When this option is selected, pressing the ► or Select buttons will advance the
delay by 5 millisecond increments. Pressing the ◄ button will reduce the delay
by 5 milliseconds. The maximum delay available is 150 milliseconds. Use the ▼
button to select the next option. Use the ▲ option to return to the previous option.
EXIT LIPSYNC ADJUST
This option will return the user to the Main Features Menu
This option will return the user to the Main Features Menu. To return to the Main
Features Menu press the Select button. Use the ▼ button to select the next
option. Use the ▲ option to return to the previous option.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V CINEMA SCALER PRO - CONFIGURATION
A/V CINEMA SCALER PRO - OUTPUT SELECTION
The Output Selection menu will allow the user to select the output video
resolution.
To enter the Output Selection menu use the ◄ and ► buttons from the Main
Features Menu to select Output Selection. Use the ▼ or Select button to enter
the menu. The following illustrates all possible options that are available in the
Output Selection menu.
OUTPUT TIMING 1080P
This option will change the output resolution to a progressive 1920x1080 at 60Hz
signal. All input formats will be scaled to this resolution.
Press the Select button to set this resolution. The change will be immediate.
Pressing the ▼ button will cycle to the Output Timing 2K option. Use the ▼
button to select the next option. Use the ▲ option to return to the previous option.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V CINEMA SCALER PRO - CONFIGURATION
OUTPUT TIMING 2K
This option will change the output resolution to a progressive 2048x1080 at 60Hz
signal. All input formats will be scaled to this resolution.
Press the Select button to set this resolution. The change will be immediate.
Pressing the ▼ button will cycle to the Exit Output Selection option. Use the ▼
button to select the next option. Use the ▲ option to return to the previous option.
EXIT OUTPUT SELECTION
This option will return the user to the Main Features Menu
This option will return the user to the Main Features Menu. To return to the Main
Features Menu press the Select button. Use the ▼ button to select the next
option. Use the ▲ option to return to the previous option.
A/V CINEMA SCALER PRO - ON SCREEN DISPLAY ADJUST
The On Screen Display Adjust menu will allow the user to set options related
to the on-screen display. Horizontal and vertical alignment, opacity, and time-out
settings are found here.
To enter the On Screen Display Adjust menu use the ◄ and ► buttons from
the Main Features Menu to select On Screen Display Adjust. Use the ▼
or Select button to enter the menu. The following page illustrates all possible
options that are available in the On Screen Display Adjust menu.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V CINEMA SCALER PRO - CONFIGURATION
This option will change the horizontal position of the on-screen display.
Press the ◄ or ► or Select buttons to begin adjusting this option. A < and >
character will surround the numerical value to signify that user adjustment can
begin. Use the ◄ and ► to adjust the value of this option. When adjustments are
complete, press the Select button to save. Use the ▼ button to select the next
option. Use the ▲ option to return to the previous option.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V CINEMA SCALER PRO - CONFIGURATION
VERTICAL POSITION
This option will change the vertical position of the on-screen display.
Press the ◄ or ► or Select buttons to begin adjusting this option. A < and >
character will surround the numerical value to signify that user adjustment can
begin. Use the ◄ and ► to adjust the value of this option. When adjustments are
complete, press the Select button to save. Use the ▼ button to select the next
option. Use the ▲ option to return to the previous option.
TIMEOUT
This option will change the amount of idle time before the on-screen display
returns to the Main Screen
Press the ◄ or ► or Select buttons to begin adjusting this option. A < and >
character will surround the numerical value to signify that user adjustment can
begin. Use the ◄ and ► to adjust the value of this option. When adjustments are
complete, press the Select button to save. Use the ▼ button to select the next
option. Use the ▲ option to return to the previous option.
BACKGROUND
This option will change the opacity level of the on-screen display.
Press the ◄ or ► or Select buttons to begin adjusting this option. A < and >
character will surround the numerical value to signify that user adjustment can
begin. Use the ◄ and ► to adjust the value of this option. When adjustments are
complete, press the Select button to save. Use the ▼ button to select the next
option. Use the ▲ option to return to the previous option.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V CINEMA SCALER PRO - CONFIGURATION
EXIT OSD ADJUST
This option will return the user to the Main Features Menu
This option will return the user to the Main Features Menu. To return to the Main
Features Menu press the Select button. Use the ▼ button to select the next
option. Use the ▲ option to return to the previous option.
A/V CINEMA SCALER PRO - FIRMWARE
The Firmware option will simply display the current firmware that is running
on the A/V Cinema Scaler Pro. This information may be needed when calling
technical support.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
DB-25 AUDIO INPUT & BYPASS MODE
A/V CINEMA SCALER PRO - DB-25 AUDIO BYPASS MODE
The A/V Cinema Scaler Pro can accept high quality 8 channel analog audio via
the DB-25 input located on the back panel. This input is only accessible from the
bypass mode. The audio through this input will be directly passed to the analog
DB-25 output.
ENABLING BYPASS MODE
To enable the bypass mode, locate the bypass mode button on the front panel.
From the Main Screen press the Bypass button on the front panel to enable the
bypass mode. The bypass mode will cycle in the following order. Each button
press will progress to the next option.
Main Screen
Analog DB-25
Input
Please note that there will be NO VIDEO OUTPUT when using the bypass
function.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
ANALOG INPUT AND OUTPUT PINOUT
43
Download from Www.Somanuals.com. All Manuals Search And Download.
ANALOG INPUT AND OUTPUT PINOUT
ANALOG DB-25 OUTPUT
Pin
1
Function
Pin
15
16
17
18
19
20
21
22
23
24
Function
Left Negative Output
Right Surround Positive Output
Right Surround Negative Output
Left Surround Negative Output
Right Extra Negative Output
Right Negative Output
Left Extra Negative Output
Center Negative Output
Chassis GND
Left Surround Positive Output
Right Extra Positive Output
Right Positive Output
Left Extra Positive Output
Chassis GND
2
3
4
5
6
Center Positive Output
Tied to Input
7
8
NC
9
NC
10
11
12
13
14
Chassis GND
Subwoofer Positive Output (band-
limited to 300Hz in DigitalMedia
mode)
Chassis GND
Subwoofer Negative Output
Chassis GND
25
Tied to Input
Left Positive Output
ANALOG DB-25 INPUT
Pin
1
Function
Pin
15
16
17
18
19
20
21
22
23
24
Function
Left Negative Input
Right Surround Positive Input
Right Surround Negative Input
Left Surround Negative Input
Right Extra Negative Input
Right Negative Input
Left Extra Negative Input
Center Negative Input
Chassis GND
Left Surround Positive Input
Right Extra Positive Input
Right Positive Input
Left Extra Positive Input
Chassis GND
2
3
4
5
6
Center Positive Input
Tied to Output
7
8
NC
9
NC
10
11
12
13
14
Chassis GND
Subwoofer Positive Input (band-
limited to 300Hz in DigitalMedia
mode)
Chassis GND
Subwoofer Negative Input
Chassis GND
25
Tied to Output
Left Positive Input
44
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232 SERIAL CONTROL INTERFACE
Bits per second ................................................................................................. 19200
Data bits .................................................................................................................... 8
Parity .................................................................................................................. None
Stop bits .....................................................................................................................1
Flow Control ....................................................................................................... None
45
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232 SERIAL CONTROL COMMANDS
Set Commands
Command Code
S SOURCE 0
S SOURCE 1
S SOURCE 2
S SOURCE 3
S SOURCE 4
S SOURCE 5
S SOURCE 6
S SOURCE 7
S AUDIO 0
Response
Description
> SOURCE HDMI
> SOURCE DVI1
HDMI
DVI1
> SOURCE DVI2
DVI2
> SOURCE YPbPr2
> SOURCE YPbPr1
> SOURCE PC
YPbPr2
YPbPr1
PC
> SOURCE ANALOG_BYPASS
> SOURCE DIGITAL_BYPASS
> AUDIO Stereo
Analog Bypass
Digital Bypass(if available<---H/W exist)
Audio-Input select to Analog (Stereo)
Audio-Input select to Digital (Coaxial)
Audio-Input select to Digital (Optical)
Soft Reboot Machine
1080P 60HZ RESOLUTION OUTPUT
2K RESOLUTION OUTPUT
SCALER FULL OUTPUT
SCALER OVERSCAN OUTPUT
SCALER UNDERSCAN OUTPUT
SCALER LETTERBOX OUTPUT
SCALER PANSCAN OUTPUT
S AUDIO 1
> AUDIO Coaxial
S AUDIO 2
> AUDIO Optical
REBOOT
S OUTPUT 10
S OUTPUT 19
S SIZE 0
> OUTPUT 1080P60
> OUTPUT 2K
> SIZE FULL
S SIZE 1
> SIZE OVERSCAN
> SIZE UNDERSCAN
> SIZE LETTERBOX
> SIZE PANSCAN
S SIZE 2
S SIZE 3
S SIZE 4
> PICTUREMODE
STANDARD~USER
0:STANDARD ; 1:MOVIE ; 2:VIVID ; 3:USER
,PICTURE MODE OUTPUT
S PICTUREMODE 0~3
S CONTRAST 0~100
S BRIGHTNESS 0~100
S HUE 0~100
> CONTRAST 0~100
> BRIGHTNESS 0~100
> HUE 0~100
CONTRAST 0~100 ADJUST
BRIGHTNESS 0~100 ADJUST
HUE 0~100 ADJUST
[Defaut:50]
[Defaut:45]
[Defaut:50]
[Defaut:60]
[Defaut:32]
S SATURATION 0~100
S SHARPNESS 0~100
> SATURATION 0~100
> SHARPNESS 0~100
SATURATION 0~100 ADJUST
SHARPNESS 0~100 ADJUST
0:OFF ; 1:LOW ; 2:MIDDLE ; 3:HIGH ,NR
CONTROL
S NR 0~3
> NR OFF~HIGH
S PCHPOSITION 0~100
S PCVPOSITION 0~100
S PCCLOCK 0~100
S PCPHASE 0~63
> PCHPOSITION 0~100
> PCVPOSITION 0~100
> PCCLOCK 0~100
> PCPHASE 0~63
H POSITION 0~100 ADJUST
V POSITION 0~100 ADJUST
PC MODE COLCK 0~100 ADJUST
PC MODE PHASE 0~63 ADJUST
0:NORMAL ; 1:WARM ; 2:COOL ; 3:USER ,COLOR
TEMP SETTING
COLOR TEMP "RED" ADJUST
[Defaut:47]
S COLORTEMP 0~3
S RED 0~100
> COLORTEMP NORMAL~USER
> RED 0~100
COLOR TEMP "GREEN" ADJUST
[Defaut:47]
S GREEN 0~100
> GREEN 0~100
COLOR TEMP "BLUE" ADJUST
[Defaut:47]
S BLUE 0~100
> BLUE 0~100
OSD H POSITION 0~100 ADJUST
[Defaut:50]
OSD V POSITION 0~100 ADJUST
[Defaut:50]
OSD TIMEOUT 0~100 SETTING
[Defaut:10]
S OSDHPOSITION 0~100
S OSDVPOSITION 0~100
S OSDTIMEOUT 0~100
> OSDHPOSITION 0~100
> OSDVPOSITION 0~100
> OSDTIMEOUT 0~100
S OSDBACKGROUND 0~8 > OSDBACKGROUND 0~8
OSD OSDBACKGROUND 0~8 ADJUST[Defaut:5]
RESET ACTION
S RESET 1
S OSDNOTICE 0
S OSDNOTICE 1
AUDIO_DATA
PLIION
> RESET ON
> OSDNOTICE ENABLE
> OSDNOTICE DISABLE
AUDIO INFO. Like LCM shown
> PLII IS ON
ON SCREEN MENU is ON
ON SCREEN MENU is OFF
DOLBY PROLOGICII PROCESSING ON
DOLBY PROLOGICII PROCESSING OFF
DYNAMIC RANGE CONTROL ON
DYNAMIC RANGE CONTROL OFF
REFERENCE LEVEL COMP. ON
REFERENCE LEVEL COMP. OFF
DVI OUTPUT TYPE IS DVI-A ANALOG
DVI OUTPUT TYPE IS DVI-D DIGITAL
HDMI EDID TYPE 5.1
PLIIOFF
> PLII IS OFF
DRCON
> DRC IS ON
DRCOFF
RLCON
> DRC IS OFF
> RLC IS ON
RLCOFF
> RLC IS OFF
DVIA
> DVI-A ANALOG
> DVI-D DIGITAL
> EDID 5.1
DVID
EDID51
46
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232 SERIAL CONTROL COMMANDS
EDID71
> EDID 7.1
HDMI EDID TYPE 7.1
VGA_AUTO
> AutoConfig
VGA MODE AutoConfig
> DVI-D DIGITAL or DVI-A
ANALOG
DVI?
SHOW DVI-D DIGITAL or DVI-A ANALOG
> AUDIO SRC=ANALOG or COAX SHOW AUDIO SRC=ANALOG or COAX or
AUDSRC?
INFO
or OPTICAL
OPTICAL
> EXT-AVCINEMAA 3.21
07/02/2010
SHOW Latest F/W and date when F/W updated.
Status Commands
Command Code
Response
Description
R OUTPUT
> OUTPUT NATIVE~2K
SHOW OUTPUT STATUS
SHOW SOURCE STATUS
SHOW SIZE STATUS
R SOURCE
> SOURCE HDMI
R SIZE
> SIZE FULL~PANSCAN
R PICTUREMODE
R CONTRAST
R BRIGHTNESS
R HUE
> PICTUREMODE STANDARD~USER SHOW PICTURE MODE STATUS
> CONTRAST 0~100
> BRIGHTNESS 0~100
> HUE 0~100
SHOW CONTRAST STATUS
SHOW BRIGHTNESS STATUS
SHOW HUE STATUS
R SATURATION
R SHARPNESS
R NR
> SATURATION 0~100
> SHARPNESS 0~100
> NR OFF~HIGH
SHOW SATURATION STATUS
SHOW SHARPNESS STATUS
SHOW NR STATUS
R PCHPOSITION
R PCVPOSITION
R PCCLOCK
R PCPHASE
R COLORTEMP
> PCHPOSITION 0~100
> PCVPOSITION 0~100
> PCCLOCK 0~100
SHOW PC H-POSITION STATUS
SHOW PC V-POSITION STATUS
SHOW PC COLOK STATUS
SHOW PC PHASE STATUS
SHOW COLOR TEMP STATUS
> PCPHASE 0~63
> COLORTEMP NORMAL~USER
NOTE: When using the Bypass Modes the only available commands are:
• S SOURCE commands
• R SOURCE command
• INFO command
47
Download from Www.Somanuals.com. All Manuals Search And Download.
RACK MOUNT / TABLETOP INSTALLATION
Rack mount ears are provided for installation of this unit into an equipment rack.
Please refer to Figure 1 below. When using the product in a tabletop configuration,
please install the provided rubber feet as shown in Figure 2.
*3PCS
1. Locate the side screws on the unit.
2. Remove the front 3 screws that are located closest to the front of the unit.
3. Using the removed screws, screw the rack mounting bracket into the unit.
4. Repeat the procedure on the opposite side of the unit.
Figure 2. Desktop Installation
1. Turn the unit upside down.
2. Affix rubber feet to the unit, making sure you match up the correct shapes as
shown in the diagram above.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Video Section
Input Connectors
HDMI
1 – Type A 19pin Female
VGA
1 – HD-15 Female
DVI-I
DVI-D
Component
1 – DVI-I 29pin Female
1 – DVI-I 29pin Female (Digital)
2 – 3 RCA
Input Resolutions
640x480
800x600
(60Hz)HDMI/DVI-I/DVI-D/VGA
(60Hz)HDMI/DVI-I/DVI-D/VGA
(60Hz)HDMI/DVI-I/DVI-D/VGA
(60Hz)HDMI/DVI-I/DVI-D/VGA
(60Hz)HDMI/DVI-I/DVI-D/VGA
(60Hz)HDMI/DVI-I/DVI-D/VGA
(60Hz)HDMI/DVI-I/DVI-D/VGA
(60Hz)HDMI/DVI-I/DVI-D/VGA
(60Hz)HDMI/DVI-I/DVI-D/VGA
(59/60Hz)HDMI/Component/DVI-D
(59/60Hz)HDMI/Component/DVI-D
(50Hz)HDMI/Component/DVI-D
(50Hz)HDMI/Component/DVI-D
(50/60Hz)HDMI/Component/DVI-D
(50/60Hz)HDMI/Component/DVI-D
(25/29/30/50/59/60Hz)HDMI/
Component/DVI-D
1024x768
1152x864
1280x800
1360x768
1280x960
1600x1200
1920x1200
720x480i
720x480p
720x576i
720x576p
1280x720p
1920x1080i
1920x1080p
1920x1080p
(24Hz)HDMI/DVI-D (Passthough)
Output Connectors
DVI-I (DVI-A/DVI-D Switchable)
1
Output Resolutions
1920x1080p
2048x1080p
(23.97/24/50/60Hz) DVI-I
(23.97/24/50/60Hz) DVI-I
Component Input Sensitivity
HDMI Compliancy
1 Vp-p
1.2
HDCP Compliant
Yes
Input Colorspace
HDMI
VGA
RGB/YCbCr
RGBHV
DVI-I
DVI-D
RGBHV/RGB
RGB
Component
YPbPr
Output Colorspace
RGB
49
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Audio Section
Input Connectors
HDMI
1
RCA Type Analog L/R
Digital Coaxial
Analog DB-25
5 (1 per input excluding HDMI)
5 (1 per input excluding HDMI)
1
Output Connectors
Analog DB-25
1
THD
< 0.001%
2Vrms
Stereo Input Max Voltage
Output Level
From Digital Source
From Analog Source
-20dBFS 350mVrms
0dBFS 3.5Vrms
Frequency Response
< ± 0.5dB
Signal-To-Noise Ratio*
Analog L/R Input
Digital Input
>90dB
>100dB
>110dB
Analog DB-25 Input
*20Hz-20kHz A weight filter, reference to full scale output of 3.5Vrms
Coaxial Digital Audio Format Support
2 Channel LPCM
32kHz – 96kHz
Multi-Channel AC-3
2-6 Channels Bitstream
HDMI Digital Audio Format Support
2 Channel LPCM
32kHz – 96kHz
Multi-Channel AC-3
8 Channel LPCM
2-6 Channels Bitstream
32kHz - 96kHz
Audio Processing
Dolby Pro Logic II*
All analog/digital inputs
*Analog DB-25 audio inputs bypass all audio processing
50
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
General Specifications
Operating Temperature
Control Terminal
10 - 40° C Non-Condensing/Low Humidity
RS-232 Serial Communications
16.9” W x 1.7”H x 8”D
Dimensions
Package Dimensions
Rack Mountable
18.5” W x 4.5”H x 12”D
1.5U (Rack Ears Included)
Estimate 12 lbs./ 9 lbs. (Final TBD)
Shipping/Unit Weight
Power
Universal Power Supply
Power Output
100-240Vac, 50/60Hz
12Vdc
Power Consumption
6.67A (80 Watts Max)
51
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
Gefen warrants the equipment it manufactures to be free from defects in material
and workmanship.
If equipment fails because of such defects and Gefen is notified within two (2)
years from the date of shipment, Gefen will, at its option, repair or replace the
equipment, provided that the equipment has not been subjected to mechanical,
electrical, or other abuse or modifications. Equipment that fails under conditions
other than those covered will be repaired at the current price of parts and labor in
effect at the time of repair. Such repairs are warranted for ninety (90) days from
the day of reshipment to the Buyer.
This warranty is in lieu of all other warranties expressed or implied, including
without limitation, any implied warranty or merchantability or fitness for any
particular purpose, all of which are expressly disclaimed.
1. Proof of sale may be required in order to claim warranty.
2. Customers outside the US are responsible for shipping charges to and from
Gefen.
3. Copper cables are limited to a 30 day warranty and cables must be in their
original condition.
The information in this manual has been carefully checked and is believed to
be accurate. However, Gefen assumes no responsibility for any inaccuracies
that may be contained in this manual. In no event will Gefen be liable for
direct, indirect, special, incidental, or consequential damages resulting from
any defect or omission in this manual, even if advised of the possibility of such
damages. The technical information contained herein regarding the features and
specifications is subject to change without notice.
For the latest warranty coverage information, refer to the Warranty and Return
PRODUCT REGISTRATION
Please register your product online by visiting the Register Product page
under the Support section of the Gefen Web site.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Rev E2
20600 Nordhoff St., Chatsworth CA 91311
1-800-545-6900 818-772-9100 fax:
Pb
This product uses UL listed power supplies.
Download from Www.Somanuals.com. All Manuals Search And Download.
|