Geemarc Caller ID Box Cordless Caller Display Unit User Manual

Setting options for Clearview Cordless Caller Display  
You may select the LCD contrast level (factory setting as level 2); the call alert tone  
either On or Off (factory setting is Off); the clock either 12 or 24 hour format (factory  
setting is 24 hour); and the alarm clock either On or Off (factory setting is Off).  
In case of difficulty  
What to do if “CHECK BASE” is seen on Clearview display  
This means that the base is disconnected, or the ID code was not set properly, or the  
Clearview display is out of range. Check base is connected to telephone modular  
socket, verify ID code, or move the Clearview display closer to the base and press  
Page to confirm in range.  
1. Press Set for 5 seconds, until you see “--OPTIONS--”.  
2. Press Review Forward repeatedly to scroll through current option settings.  
3. Any time you wish to change a setting, press Set.  
4. The last section in this option mode is name setting. If you want to exit from the  
option mode, simply press Review Forward. Press Set to enter name setting for  
phone directory (see section below).  
Clearview  
How to change the base identification code?  
Your base comes with a random identification generated at the factory. Shouldyouwant  
to change it, pressSet thenPage and keep both keys depressed for 5 seconds until the  
new random code is shown. Remember you must then set your Clearview display to  
this new code.  
Cordless Caller Display Unit  
Alarm clock setting  
1. Press Timer for 5 seconds, until you see “ALARM ON or OFF”.  
2. Press Set to toggle the On/Off setting.  
Care of your Clearview Cordless Caller Display  
User Guide  
3. When Alarm On, press Review Forward or Backward to show the current alarm  
time setting and press Set if you want to change it.  
The Caller Display should be cleaned with a soft dry cloth. It is important to unplug the  
main base unit from the mains supply and telephone socket prior to cleaning. Do not  
apply polishes or strong cleaning agents as these could damage the moulding.  
4. Use Review Forward or Backward to scroll the hour and Learn to advance to  
minute.  
THUNDERSTORMS: During thunderstorms, lightning may strike telephone lines, this  
can damage any equipment attached to a line, including telephones and telephone  
equipment. Ifpossible, unplugyourtelephoneortelephoneequipmentfromthesocketin  
the event of a storm.  
5. When the alarm time setting is OK, press Set to finish setting and you will hear a  
confirmationbeep.  
Note - When the alarm has been set to On, a “*” symbol appears at the bottom right  
corner of the display. When the alarm is activated it will beep for 1 minute. Press any  
key to stop the alarm.  
Conditions of use  
Your Geemarc Clearview Cordless Caller Display has been approved for use on  
private direct exchange lines and business lines. It is also approved for use with  
approved compatible PABX’s.  
The alarm will operate at the same time the next day unless it is set to off. See setting  
options above.  
Name setting for Phonebook Directory for name mapping (50 entries)  
1. At the last part of the option mode, the display shows “NAME SETTING”. Press  
Set.  
2. Press Review Forward or Backward to scroll to the record that you want to input.  
3. Press Set to select the record. The display will show the record number and “0”  
in the telephone number field.  
4. Use Review Forward or Backward to select the digit. Learn to advance to next  
digit. Delete for correction.  
5. When all digits are OK, press Set to jump to the name field.  
6. Press Review Forward or Backward to select the character. Press Learn to  
advance to next character.  
7. When all characters in the name are OK, press Set to finish this record setting and  
you will hear the confirmation beep. The display will advance to the next record.  
8. Press Timer to quit the name setting mode.  
Your exchange line should be a standard exclusive (DEL) and not a shared service or  
party line.  
Your line should be Multi Frequency (TONE) dialling. If you experience any difficulty  
contact your network service provider.  
Approval  
ThisproductcomplieswiththerequirementsofECdirective89/336EEC. Anymodification  
of the unit or connection to non approved accessories may affect this compliance.  
Guarantee  
FromthemomentyourGeemarcproductispurchased, GeemarcTelecomLtdguarantee  
it for one year. During this time, all repairs or replacements at our option are free of  
charge. Carriage to Geemarc is payable by the sender.  
Theguaranteedoesnotcoveraccidents, negligenceorbreakagestoanyparts. Theunit  
parts must not be tampered with or taken apart by anyone who is not an authorised  
Geemarc representative.  
Note - Phonebook directory entries cannot be deleted but can be changed by editing  
them.  
Editing a phonebook directory entry  
The guarantee of Geemarc Telecom Ltd in no way limits your legal rights.  
1. At the last part of the option mode, the display shows “NAME SETTING”. Press  
Shouldyouexperienceaproblemthencontactourhelplineortheretailerfromwhomyou  
purchased your Geemarc product.  
Set.  
2. Press Review Forward or Backward to scroll to the record that you want to  
change.  
If you do have to return the product to Geemarc Telecom Ltd, please enclose a note of  
your name and address with details of the problem being experienced. Also, enclose a  
copy of your purchase receipt and a cheque for £5 to cover return postage and packing.  
YOUR RECEIPT IS YOUR GUARANTEE  
3. Press Set to select the record.  
4. Press Delete until number is erased.  
5. Use Review Forward orBackwards to select the digit. Learn to advance to next  
digit.  
Please note:The guarantee applies to the United Kingdom only.  
6. When all digits are OK, press Set to jump to name field.  
7. Press Delete until name is erased.  
Geemarc reserve the right to modify the design and specification of the product and  
related equipment in line with our policy of continuous product improvement.  
8. Use Review Forward or Backwards to select the character. Learn to advance  
to next character.  
GeemarcTelecom Ltd  
5 Swallow Court  
Swallowfields  
Welwyn Garden City  
Hertfordshire AL7 1SB  
9. When all characters are OK press Set to select next entry to be edited by using  
Review Forward or Backward.  
10. Press Timer to quit editing.  
Helpline - 01707 384438 Facsimile - 01707 372529  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Conair Hair Clippers HC408R User Manual
Craftsman Blower 358748200 User Manual
Crown Audio Microphone PZM 185 User Manual
Cypress Clock CY7B991 User Manual
Desa Water Heater GVR35PA User Manual
Extron electronic Speaker SI 3CT LP User Manual
Extron electronic Speaker V LockTM User Manual
Faber Ventilation Hood TRATTO User Manual
Garland Oven UIR36 User Manual
Garmin Chainsaw 353 User Manual