|
Monogram.
Use and Care Guide
for ZEK735
Built-In Wall Oven
Monogram.TM
27″ Self-Cleaning Oven
164D3333P017
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using your oven, read this guide carefully.
It is intended to help you operate and maintain your new oven properly.
Keep it handy for answers to your questions.
If you don’t understand something or need more help, call:
GE Answer Center®
800.626.2000
24 hours a day, 7 days a week
Write down the model and serial numbers.
You’ll find them on a label on the front of the oven behind the oven door.
These numbers are also on the Consumer Product Ownership Registration
Card that came with your oven. Before sending in this card, please write
these numbers here:
Use these numbers in any
Model Number
correspondence or service calls
concerning your oven.
Serial Number
If you received a damaged oven…
Immediately contact the dealer (or builder) that sold you the oven.
Save time and money. Before you request service…
Check the Problem Solver in the back of this guide. It lists causes of minor
operating problems that you can correct yourself.
If you need service…
To obtain service, see the
Consumer Services page in the
back of this guide.
NEXT, if you are still not pleased,
write all the details—including
your phone number—to:
We’re proud of our service and
want you to be pleased. If for some
reason you are not happy with the
service you receive, here are three
steps to follow for further help.
Manager, Consumer Relations
GE Appliances
Appliance Park
Louisville, KY 40225
FINALLY, if your problem is still
not resolved, write:
FIRST, contact the people who
serviced your appliance. Explain
why you are not pleased. In most
cases, this will solve the problem.
Major Appliance Consumer
Action Program
20 North Wacker Drive
Chicago, IL 60606
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using this appliance.
• CAUTION: ITEMS OF INTEREST TO
CHILDREN SHOULD NOT BE STORED IN
CABINETS ABOVE AN OVEN. CHILDREN
CLIMBING ON THE OVEN TO REACH
ITEMS COULD BE SERIOUSLY INJURED.
IMPORTANT SAFETY NOTICE
• The California Safe Drinking Water
and Toxic Enforcement Act requires the
Governor of California to publish a list of
substances known to the state to cause birth
defects or other reproductive harm, and requires
businesses to warn customers of potential
exposure to such substances.
• Teach children not to play with the controls
or any other part of the oven.
• Never leave the oven door open when you are
not watching the oven.
• The fiberglass insulation in self-cleaning ovens
gives off a very small amount of carbon
monoxide during the cleaning cycle. Exposure
can be minimized by venting with an open
window or using a ventilation fan or hood.
• Always keep combustible wall coverings,
curtains or drapes a safe distance from
your oven.
• Always keep dish towels, dish cloths, pot
holders and other linens a safe distance from
your oven.
When using electrical appliances, basic
safety precautions should be followed, including
the following:
• Always keep wooden and plastic utensils
and canned food a safe distance away from
your oven.
• Have the installer show you the location
of the circuit breaker or fuse. Mark it for
easy reference.
• Never wear loose-fitting or hanging garments
while using the appliance. Be careful when
reaching for items stored in cabinets over the
oven. Flammable material could be ignited if
brought in contact with hot heating elements and
may cause severe burns.
• Use this appliance only for its intended use as
described in this guide.
• Be sure your appliance is properly installed
and grounded by a qualified technician in
accordance with the provided installation
instructions.
• Use only dry pot holders—moist or
damp pot holders on hot surfaces may
result in burns from steam. Do not let
• Do not attempt to repair or replace any part of
your oven unless it is specifically recommended
in this guide. All other servicing should be
referred to a qualified technician.
pot holders touch hot heating elements. Do not
use a towel or other bulky cloth. Such cloths can
catch fire on a hot heating element.
• DO NOT STORE OR USE COMBUSTIBLE
MATERIALS, GASOLINE OR OTHER
FLAMMABLE VAPORS AND LIQUIDS IN
THE VICINITY OF THIS OR ANY OTHER
APPLIANCE.
• Before performing any service, DISCONNECT
THE OVEN POWER SUPPLY AT THE
HOUSEHOLD DISTRIBUTION PANEL BY
REMOVING THE FUSE OR SWITCHING OFF
THE CIRCUIT BREAKER.
• Do not leave children alone—children should
not be left alone or unattended in an area where an
appliance is in use. They should never be allowed
to sit or stand on any part of the appliance.
• Do not let cooking grease or other flammable
materials accumulate in or near the oven.
• Do not use water on grease fires.
Smother fire or flame or use a multi-
purpose dry chemical or foam-type
fire extinguisher.
• Do not allow anyone to climb, stand or hang on
the door. They could damage the oven or cause
severe personal injury.
• Be sure the oven is securely installed in a
cabinet that is firmly attached to the house
structure. Never allow anyone to climb, sit,
stand or hang on the oven door.
Flame in the oven can be smothered completely
by closing the oven door and turning the oven off
or by using a multi-purpose dry chemical or foam-
type fire extinguisher.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
• Never leave the oven door open when you are
not watching the oven.
• When using cooking or roasting bags in the
oven, follow the manufacturer’s directions.
• Do not store flammable materials in an oven.
• Do not use your oven to dry newspapers.
If overheated, they can catch on fire.
• For your safety, never use your appliance for
warming or heating the room.
• Do not use the oven for a storage area.
Items stored in an oven can ignite.
• Do not touch the heating elements or the
interior surface of the oven. These surfaces may
be hot enough to burn even though they are dark
in color. During and after use, do not touch, or let
clothing or other flammable materials contact, any
interior area of the oven; allow sufficient time for
cooling first.
• Do not leave paper products, cooking utensils
or food in the oven when not in use.
• After broiling, always take the broiler pan
out of the oven and clean it. Leftover grease in
the broiler pan can catch on fire next time you use
the pan.
Potentially hot surfaces include the oven vent
opening, surfaces near the opening, crevices
around the oven door, the edges of the door
window and metal trim parts above the door.
• Never leave jars or cans of fat drippings in or
near your oven.
• Do not use aluminum foil to line the oven
bottom, except as suggested in this guide.
Improper installation of aluminum foil may
result in a risk of electric shock or fire.
Remember: The inside surface of the oven may
be hot when the door is opened.
• When cooking pork, follow the directions
exactly and always cook the meat to an internal
temperature of at least 170°F. This assures that, in
the remote possibility that trichina may be present
in the meat, it will be killed and the meat will be
safe to eat.
• Clean only parts listed in this Use and
Care Guide.
Self-Cleaning Oven
• Do not clean the oven door gasket. The door
gasket is essential for a good seal. Care should
be taken not to rub, damage or move the gasket.
Oven
• Stand away from the oven when opening the
door. The hot air or steam which escapes can
cause burns to hands, face and/or eyes.
• Do not heat unopened food containers.
Pressure could build up and the container could
burst, causing an injury.
• Do not use oven cleaners. No commercial oven
cleaner or oven liner protective coating of any
kind should be used in or around any part of the
oven. Residue from oven cleaners will damage
the inside of the oven when the self-clean cycle
is used.
• Before self-cleaning the oven, remove the
• Keep the oven vent ducts unobstructed.
• Keep the oven free from grease buildup.
broiler pan, grid and other cookware.
• Be sure to wipe up excess spillage before
starting the self-cleaning operation.
• Place the oven shelf in the desired position
while the oven is cool. If the shelves must be
handled when hot, do not let pot holders contact
the heating elements.
• If the self-cleaning mode malfunctions, turn
the oven off and disconnect the power supply.
Have it serviced by a qualified technician.
• Pulling out the shelf to the stop-lock is a
convenience in lifting heavy foods.
It is also a precaution against burns from
touching hot surfaces of the door or oven walls.
SAVE THESE
INSTRUCTIONS
5
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES OF YOUR OVEN
OVEN
TIME CONTROLS
COOKING
TIME
DELAY
START
BROIL
HI/LO
START
BAKE
OVEN
LIGHT
ON/OFF
1
6
2
7
3
8
4
9
5
0
KITCHEN
SELF
CLEAR
OFF
6
7
PROBE
CLOCK
TIMER
CLEAN
ON/OFF
5
4
14
8
9
3
2
10
11
15
16
12
13
1
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Explained
on page
Feature Index
1 Oven Door Gasket
26, 30
2 Model and Serial Numbers
3 Oven Broil Element
4 Automatic Oven Door Latch
5 Oven Vent
3
5, 24, 25, 29
26–28
5
6 Oven Control, Clock and Timer
7 Oven Vent Grille
8–12
26
8 Automatic Oven Light Switch
9 Oven Interior Light
10 Probe Outlet
—
26, 29
21, 22
11 Oven Shelf Supports
5, 13, 14,
20, 24–26,
28, 30
Shelf positions for cooking are suggested in
the Baking, Roasting and Broiling sections.
12 Bake Element
4, 29
May be lifted gently for wiping the oven floor.
13 Lift-Off Oven Door with Broil Stop Position
30
Easily removed for cleaning.
14 Oven Shelves with Stop-Locks
15 Broiler Pan and Grid
16 Probe
5, 13, 14, 20,
24–26, 28, 30
5, 20, 21,
24–26, 29
21, 22, 31
7
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES OF YOUR OVEN CONTROL
5
1
2
3
4
6
7
OVEN
TIME CONTROLS
COOKING
TIME
DELAY
START
BROIL
START
BAKE
HI/LO
OVEN
LIGHT
ON/OFF
1
6
2
7
3
8
4
9
5
0
KITCHEN
SELF
CLEAR
OFF
CLOCK
PROBE
TIMER
CLEAN
ON/OFF
10
13
12
11
9
8
1. BAKE. Press to select the bake function.
10. CLEAR/OFF. Press to cancel any timed oven
operation except the clock and timer.
2. BROIL HI/LO. Press to select the broil function.
11. NUMBER PADS. Use to set any function
requiring numbers—for example, the time of day
on the clock, the timer, the oven temperature, the
internal food temperature, the starting and length
of cooking time for Timed Bake and the starting
and length of cleaning time for Self-Clean.
3. OVEN LIGHT ON/OFF. Press to turn the oven
light on or off.
4. DISPLAY. Shows the operations you have
selected, the time of day and the cooking or
cleaning status.
5. START. Must be pressed to start any cooking or
12. SELF CLEAN. Press to select the self-cleaning
function. See the Operating the Self-Cleaning
Oven section.
cleaning function.
6. COOKING TIME. Use for Timed Bake.
13. PROBE. Press when using the probe to cook food.
7. DELAY START. Use along with COOKING
TIME or SELF CLEAN to set the oven to start and
stop automatically at a time you select.
If “F–and a number or letter” flash in the display
and the oven control signals, this indicates
function error code. Press CLEAR/OFF. Allow
the oven to cool for one hour. Put the oven back
into operation. If the function error code repeats,
disconnect power to the oven and call for service.
8. CLOCK. Press to enter the time of day.
9. KITCHEN TIMER ON/OFF. Press to select the
timer function. The timer does not control oven
operations. The timer can time up to 9 hours and
59 minutes.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
OVEN CONTROL, CLOCK AND TIMER
Clock
The clock must be set for the automatic oven timing functions to work properly.
The time of day clock cannot be changed during Delay Start. (It can be
changed during a regular bake or broil operation.)
To Set the Clock
1. Press CLOCK.
If number pads are not pressed within one minute
CLOCK
after you press CLOCK, the display reverts to the
original setting. If this happens, press CLOCK and
reenter the time of day.
2. Press the number pads the same way you
read them. For example, to set 12:34,
press the number pads 1, 2, 3 and 4 in
that order.
3. Press START. This enters the time and
START
starts the clock.
To check the time of day when the display is
showing other information, simply press CLOCK.
The time of day shows until another pad is pressed.
Timer
You may program the timer to time cooking or other
household activities for up to 9 hours and 59 minutes.
When the timer reaches “ :00,” the control will beep
3 times followed by one beep every 6 seconds until
KITCHEN TIMER ON/OFF is pressed.
The timer counts down in minutes, 1 minute at a time,
until the last 60 seconds are reached, then the control
will beep one time. The seconds will not be displayed
until the last minute is reached.
The 6 second tone can be canceled by following the
steps in the Special Features of Your Oven Control
section under Tones at the End of a Timed Cycle.
How to Set the Timer
1. Press KITCHEN TIMER ON/OFF.
3. Press START.
START
KITCHEN
TIMER
ON/OFF
After pressing START, “SET” disappears;
this tells you the time is counting down,
although the display does not change until
one minute has passed.
2. Press the number pads to set the time.
For example, to enter 2 hours and 45
minutes, touch 2, 4 and 5 in that order.
4. When time is up, the oven control
KITCHEN
If you make a mistake, press KITCHEN
TIMER ON/OFF and begin again.
TIMER
signals until you press KITCHEN
ON/OFF
TIMER ON/OFF. Display then shows
the time of day.
NOTE: The minute timer is independent of all the
other functions and it does not control the oven.
The CLEAR/OFF pad does not affect the timer.
Power Failure
If a flashing time of day is in the display, you have experienced a power
failure. Reset the clock. To reset the clock, press CLOCK. Enter the correct
time of day by pressing the appropriate number pads. Press START.
(continued next page)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
OVEN CONTROL, CLOCK AND TIMER
(continued)
The control has a series of tones that will sound at different times. These
tones may sound while you set the control for an oven function or at the
end of the oven function. They will also alert you when an incorrect time
or temperature has been entered or if there is a problem with the oven.
Tones While Setting the Control
Preheat Notification Tone
When you press a touch pad you will hear a beep.
This beep will let you know you have placed enough
pressure on the pad to activate it.
When you set an oven temperature the oven
automatically starts to heat. When the temperature
inside the oven reaches your set temperature a tone will
sound to let you know to place the food in the oven.
Attention Tone
This tone will sound if you set an invalid function or try to set an additional
function. The tone can be quickly identified by watching the display messages.
SPECIAL FEATURES OF YOUR OVEN CONTROL
Your new touch pad control has additional features that you may choose
to use. The following are the features and how you may activate them.
The special feature modes can only be activated while the display is
showing the time of day clock.
They remain in the control’s memory until the steps are repeated. When the
display shows your choice press START. The special features will remain in
memory after a power failure.
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds, until
CLEAR/OFF is pressed. This continuous 6 second
beep may be canceled.
2. Press KITCHEN TIMER ON/OFF.
The display shows “CON BEEP”
(continuous beep). Press KITCHEN
TIMER ON/OFF again. The display
shows “BEEP.” (This cancels the one
beep every 6 seconds.)
KITCHEN
TIMER
ON/OFF
To cancel the 6 second beep:
1. Press BAKE and BROIL HI/LO
BROIL
BAKE
3. Press START.
at the same time for 2 seconds
HI/LO
START
until the display shows “SF.”
10
Download from Www.Somanuals.com. All Manuals Search And Download.
12 Hour Shut-Off
Cook and Hold
With this feature, should you forget and leave the
oven on, the control will automatically turn off the
oven after 12 hours during baking functions or after
3 hours during a broil function. If you wish to turn
off this feature, follow the steps below.
Your new control has a cook and hold feature that
keeps cooked foods warm for up to 3 hours after the
cooking function is finished. To activate this feature,
follow the steps below.
1. Press BAKE and BROIL HI/LO
BROIL
BAKE
at the same time for 2 seconds
HI/LO
1. Press BAKE and BROIL HI/LO
BROIL
BAKE
until the display shows “SF.”
at the same time for 2 seconds
HI/LO
until the display shows “SF.”
2. Press COOKING TIME. The
COOKING
TIME
display will show “Hld OFF.”
2. Press DELAY START. The
DELAY
display will show “12 shdn”
(12 hour shut-off). Press
DELAY START again and the
display will show “no shdn”
(no shut-off).
START
—Press COOKING TIME again
to activate the feature. The
display will show “Hld ON.”
3. Press START to activate the
START
cook and hold feature and
3. Press START to activate the
no shut-off and leave the
control set in this special
features mode.
leave the control set in this
special features mode.
START
12 Hour, 24 Hour or Clock Black-Out
Your control is set to use a 12 hour clock. If you would prefer to have
a 24 hour military time clock or black-out the clock display, follow
the steps below.
1. Press BAKE and BROIL HI/LO at the same time for
BROIL
BAKE
2 seconds until the display shows “SF.”
HI/LO
2. Press CLOCK once. The display will show “12 hr.”
CLOCK
—Press CLOCK again to change to the 24 hour
military time clock. The display will show “24 hr.”
—Press CLOCK again to black-out the clock display.
The display will show “OFF.”
3. Press START to activate your choice and leave
START
the control set in this special features mode.
NOTE: If the clock is in the black-out mode you will not be able to use the
Delay Start function.
(continued next page)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES OF YOUR OVEN CONTROL
(continued)
Control Lockout
Your control will allow you to lock down the touch
3. Press START to activate the control
lockout feature and leave the control set
in this special features mode.
START
pads so they cannot be activated when pressed.
1. Press BAKE and BROIL HI/LO
BROIL
BAKE
at the same time for 2 seconds
HI/LO
When this feature is on and the touch pads are pressed
the control will beep and the display will show “LOC.”
until the display shows “SF.”
2. Press SELF CLEAN. The
NOTE: The control lockout mode will not affect the
clock, timer and oven light touch pads.
SELF
display will show “LOC OFF.”
CLEAN
—Press SELF CLEAN again.
The display will show “LOC.”
Fahrenheit or Centigrade Temperature Selection
Your oven control is set to use the Fahrenheit temperature selections but
you may change this to use the Centigrade selections.
1. Press BAKE and BROIL HI/LO at the same time
BROIL
BAKE
for 2 seconds until the display shows “SF.”
HI/LO
2. Press BROIL HI/LO. The display will show
BROIL
“F” (Fahrenheit).
HI/LO
3. Press BROIL HI/LO again. The display will show
BROIL
“C” (Centigrade).
HI/LO
4. Press START.
START
12
Download from Www.Somanuals.com. All Manuals Search And Download.
USING YOUR OVEN
Before Using Your Oven
1. Look at the controls. Be sure you understand how to
NOTE:
set them properly.
• You may notice a “burning” or “oily” smell the first
few times you turn your oven on. This is normal in a
new oven and will disappear in a short time. To speed
the process, set a self-clean cycle for 4 hours. See
the Operating the Self-Cleaning Oven section.
2. Check the inside of the oven. Look at the shelves.
Take a practice run at removing and replacing them
properly to give sure, sturdy support.
3. Read over the information and tips that follow.
• A cooling fan may automatically turn on and off to
cool internal parts. This is normal, and the fan may
continue to run even after the oven is turned off.
4. Keep this guide handy so you can refer to it, especially
during the first weeks of using your new oven.
Oven Shelves
The shelves are designed with stop-locks so that,
when placed correctly on the shelf supports, they
will stop before coming completely out of the oven,
and will not tilt when removing food from or
placing food on them.
Bump
When placing cookware on a shelf, pull the shelf out
to the bump on the shelf support. Place the cookware
on the shelf, then slide the shelf back into the oven.
This will eliminate reaching into the hot oven.
To remove the shelf from the oven, pull the shelf
toward you, tilt the front end upward and pull the
shelf out.
To replace, place the shelf on the shelf support with
the stop-locks (curved extension of the shelf) facing
up and toward the rear of the oven. Tilt up the front
and push the shelf toward the back of the oven until it
goes past the bump on the shelf support. Then lower
the front of the shelf and push it all the way back.
Shelf Positions
The oven has four shelf supports identified in this
illustration as A (bottom), B, C, and D (top).
See the Baking section for shelf placement suggestions.
D
C
B
A
13
Download from Www.Somanuals.com. All Manuals Search And Download.
BAKING
Your oven temperature is controlled very accurately using an oven control
system. It is recommended that you operate the oven for a number of
weeks to become familiar with your new oven’s performance. If you think
an adjustment is necessary, see the Adjust the Oven Thermostat section.
It lists easy Do It Yourself instructions on how to adjust the thermostat.
How to Set Your Oven for Baking
To avoid possible burns, place shelves in the correct
position before you turn the oven on.
4. Press CLEAR/OFF when baking is
finished.
CLEAR
OFF
1. Press BAKE.
BAKE
NOTE:
• A cooling fan may automatically turn on and off to
cool internal parts. This is normal, and the fan may
continue to run even after the oven is turned off.
2. Press the number pads to set the oven
temperature.
3. Press START. When the oven starts
START
to heat the changing temperature
To change the oven temperature during the Bake
cycle, press BAKE and set the new temperature.
will be in the display. (The display
starts changing once the temperature
reaches 100°F.)
Oven Shelves
Arrange the oven
Type of Food
Angel food cake
Biscuits or muffins
Cookies or cupcakes
Brownies
Shelf Position
A
shelf or shelves in
the desired locations
while the oven is
D
C
B
A
B or C
cool. The correct
shelf position
B or C
depends on the kind
of food and the
B or C
browning desired.
Layer cakes
B or C
As a general rule,
place most foods in
Bundt or pound cakes
Pies or pie shells
Frozen pies
A or B
the middle of the oven, on either shelf position
B or C. See the chart for suggested shelf positions.
B or C
A (on cookie sheet)
B or C
Casseroles
Roasting
A or B
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Preheating
Preheat the oven if the recipe calls for it. Preheat means
bringing the oven up to the specified temperature
before putting the food in the oven. To preheat, set the
oven at the correct temperature—selecting a higher
temperature does not shorten preheat time.
Preheating is necessary for good results when baking
cakes, cookies, pastry and breads. For most casseroles
and roasts, preheating is not necessary. For ovens
without a preheat indicator light or tone, preheat
10 minutes. After the oven is preheated, place the
food in the oven as quickly as possible to prevent heat
from escaping.
Baking Pans
Pan Placement
Use the proper baking pan. The type of finish on
the pan determines the amount of browning that
will occur.
For even cooking and proper browning, there must be
enough room for air circulation in the oven. Baking
results will be better if baking pans are centered as
much as possible rather than being placed to the front
or to the back of the oven.
• Dark, rough or dull pans absorb heat resulting in a
browner, crisper crust. Use this type for pies.
Pans should not touch each other or the walls of the
• Shiny, bright and smooth pans reflect heat, resulting
in a lighter, more delicate browning. Cakes and
cookies require this type of pan.
1
2
oven. Allow 1- to 1 ⁄ -inch space between pans as well
as from the back of the oven, the door and the sides.
If you need to use two shelves, stagger the pans so
one is not directly above the other.
• Glass baking dishes also absorb heat. When baking
in glass baking dishes, the temperature may need to
be reduced by 25°F.
• If you are using dark non-stick pans, you may find
that you need to reduce the oven temperature 25°F.
to prevent over-browning.
Cookies
When baking cookies, flat cookie sheets (without
sides) produce better-looking cookies. Cookies baked
in a jelly roll pan (short sides all around) may have
darker edges and pale or light browning may occur.
Do not use a cookie sheet so large that it touches the
walls or the door of the oven. Never entirely cover a
shelf with a large cookie sheet.
For best results during baking, use only one cookie
sheet in the oven at a time.
(continued next page)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
BAKING
(continued)
Pies
Cakes
For best results, bake pies in dark, rough or dull pans
to produce a browner, crisper crust. Frozen pies in foil
pans should be placed on an aluminum cookie sheet
for baking since the shiny foil pan reflects heat away
from the pie crust; the cookie sheet helps retain it.
When baking cakes, warped or bent pans will cause
uneven baking results and poorly shaped products.
A cake baked in a pan larger than the recipe
recommends will usually be crisper, thinner and drier
than it should be. If baked in a pan smaller than
recommended, it may be undercooked and batter may
overflow. Check the recipe to make sure the pan size
used is the one recommended.
Aluminum Foil
Never entirely cover a shelf with aluminum foil. This
will disturb the heat circulation and result in poor
baking. A smaller sheet of foil may be used to catch a
spillover by placing it on a lower shelf several inches
below the food.
Don’t Peek
Set the timer for the estimated cooking time and do
not open the door to look at your food. Most recipes
provide minimum and maximum baking times such
as “bake 30-40 minutes.”
DO NOT open the door to check until the
minimum time. Opening the oven door frequently
during cooking allows heat to escape and makes
baking times longer. Your baking results may also
be affected.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMED BAKING
How to Set Your Oven for Time Bake
The oven control allows you to turn the oven on or off
automatically at specific times that you set. Examples
of Immediate Start (oven turns on now and you set it
to turn off automatically at the end of cooking time)
and Delay Start and Stop (setting the oven to turn on
automatically at a later time and turn off after a preset
cooking time) will be described.
NOTE: An attention tone will sound if you are using
Timed Baking and do not press START after entering
the baking temperature.
NOTE: Before beginning make sure the clock shows
the correct time of day.
To set the clock, first press CLOCK.
CLOCK
Press the number pads to set the time of
day. Press START.
How to Set Immediate Start and Automatic Stop
To avoid possible burns, place the shelves in the
correct position before you turn the oven on.
5. Press START. The display shows the
START
oven temperature that you set and the
cooking time countdown. (The display
starts changing once the temperature
reaches 100°F.)
The oven will turn on immediately and cook for a
selected length of time. At the end of cooking time,
the oven will turn off automatically.
The oven will continue to cook for the
programmed amount of time, then shut
off automatically.
1. Press BAKE.
BAKE
2. Press the number pads to set the oven
6. Press CLEAR/OFF to clear the end of
CLEAR
OFF
temperature.
cycle tone if necessary.
3. Press COOKING TIME.
COOKING
TIME
NOTE:
NOTE: If your recipe requires
preheating, you may need to add
additional time to the length of the
cooking time.
• The low temperature zone of this oven (between
170°F. and 200°F.) is available to keep hot cooked
foods warm. Food kept in the oven longer than two
hours at these low temperatures may spoil.
4. Press the number pads to set the
baking time.
• Foods that spoil easily, such as milk, eggs, fish,
stuffings, poultry and pork, should not be allowed
to sit for more than one hour before or after cooking.
Room temperature promotes the growth of harmful
bacteria. Be sure the oven light is off because heat
from the bulb will speed harmful bacteria growth.
The oven temperature and the cooking
time that you entered will be displayed.
(continued next page)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMED BAKING
(continued)
How to Set Delay Start and Automatic Stop
If you would like to check the times you
have set, press DELAY START to check
the start time you have set or press
COOKING TIME to check the length of
cooking time you have set.
DELAY
START
Easy Steps:
1. Press BAKE.
2. Press the number pads to select oven temperature.
3. Press COOKING TIME.
When the oven turns on at the time of day
you have set, the display will show the
changing temperature (starting at 100°F.)
and the cooking time countdown.
4. Press the number pads to set the length of
baking time.
5. Press DELAY START.
At the end of cooking time the oven
will turn off and the end of cycle tone
will sound.
6. Press the number pads to set the desired
start time.
7. Press START.
8. Press CLEAR/OFF to clear the end of
CLEAR
OFF
cycle tone if necessary.
To avoid possible burns, place the shelves in the
correct position before you turn the oven on.
NOTE:
You can set the control to delay the start of cooking,
cook for a specific length of time and then turn off
automatically.
• The low temperature zone of this oven (between
170°F. and 200°F.) is available to keep hot cooked
foods warm. Food kept in the oven longer than two
hours at these low temperatures may spoil.
1. Press BAKE.
BAKE
• Foods that spoil easily, such as milk, eggs, fish,
stuffings, poultry and pork, should not be allowed
to sit for more than one hour before or after cooking.
Room temperature promotes the growth of harmful
bacteria. Be sure the oven light is off because heat
from the bulb will speed harmful bacteria growth.
2. Press the number pads to set the
temperature.
3. Press COOKING TIME.
COOKING
TIME
NOTE: If your recipe requires
preheating, you may need to add
additional time to the cooking time.
4. Press the number pads to set the
baking time.
5. Press DELAY START.
DELAY
START
6. Press the number pads to set the time
of day you want the oven to turn on and
start cooking.
7. Press START.
START
18
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUST THE OVEN THERMOSTAT—
DO IT YOURSELF!
You may find that your new oven cooks differently
To Adjust the Thermostat:
than the one it replaced. We recommend that you
use your new oven for a few weeks to become more
familiar with it, following the times given in your
recipes as a guide.
1. Press BAKE and BROIL HI/LO
BROIL
BAKE
BAKE
at the same time for 2 seconds
until the display shows “SF.”
HI/LO
2. Press BAKE. A two digit
number shows in the display.
Press BAKE once to increase
(+) the oven temperature, or
twice to decrease (-).
If you think your new oven is too hot or too cool,
you can adjust the thermostat yourself. If you think
it is too hot, adjust the thermostat to make it cooler. If
you think it is too cool, adjust the thermostat to make
it hotter.
3. The oven temperature can be
adjusted up to (+) 35°F. hotter
or (-) 35°F. cooler. Press the
number pads the same way you
read them. For example, to
change the oven temperature
15°F., press 1 and 5.
We do not recommend the use of inexpensive
thermometers, such as those found in grocery stores,
to check the temperature setting of your new oven.
These thermometers may vary 20–40 degrees.
4. When you have made the
adjustment, press START
to go back to the time of day
display. Use your oven as
you would normally.
START
NOTE: This adjustment will not affect the broiling
or self-cleaning temperatures. It will be retained in
memory after a power failure.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
ROASTING
Roasting is cooking by dry heat. Tender meat or
Most meats continue to cook slightly after being
removed from the oven. The internal temperature will
rise about 5° to 10°F. during the recommended
standing time of 10 to 20 minutes. This allows roasts
to firm up and makes them easier to carve. To
compensate for this rise in temperature, you may want
to remove the roast sooner (at 5° to 10°F. less than the
temperature in the Roasting Guide).
poultry can be roasted uncovered in your oven.
Roasting temperatures, which should be low and
steady, keep spattering to a minimum.
Roasting is really a baking procedure used for
meats. Therefore, oven controls are set for Baking or
Timed Baking. (You may hear a slight clicking sound,
indicating the oven is working properly.) Timed
Baking will turn the oven on and off automatically.
Remember that food will continue to cook in the hot
oven and therefore should be removed when the
desired internal temperature has been reached.
How to Set Your Oven for Roasting
1. Place the shelf in A or B position. No preheating
3. Press BAKE.
BAKE
is necessary.
2. Check the weight of the
meat. Place the meat
4. Press the number pads to set the oven
temperature.
fat side up, or poultry
breast side up, on
roasting grid in a
shallow pan. The
melting fat will baste
the meat. Select a pan
as close to the size of
the meat as possible.
5. Press START.
START
B
6. Press CLEAR/OFF when roasting
CLEAR
OFF
A
is finished.
To change the oven temperature during the
roasting cycle, press BAKE and set the new
temperature.
(The broiler pan with grid is a good pan for this.)
Use of Aluminum Foil
You can use aluminum foil to line the broiler pan.
This makes clean-up easier when using the pan for
marinating, cooking with fruits, cooking heavily
cured meats or basting food during cooking. Press
the foil tightly around the inside of the pan.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
ROASTING WITH THE PROBE
See the Roasting Guide.
Correct Placement of the Temperature Probe
A temperature probe has been provided for use in your
new oven. This probe is designed to withstand high
temperatures. Temperature probes provided with other
products, such as those used for microwave ovens,
may not be designed to withstand high temperatures.
Use of probes other than the one provided with this
product may result in damage to the probe.
Use the handles of the probe and plug when inserting
and removing them from the meat and the outlet in
the oven. Do not use tongs to pull on the cable when
removing the probe—they might damage it.
TO AVOID BREAKING THE PROBE, MAKE
SURE FOOD IS COMPLETELY DEFROSTED
BEFORE INSERTING.
Never leave your probe inside the oven during a self-
cleaning cycle.
Cable
Probe
For many foods, especially roasts and poultry, internal
food temperature is the best test for doneness. The
temperature probe takes the guesswork out of roasting
by cooking foods to the exact doneness you want.
When the internal temperature of the food reaches the
temperature you set, the oven automatically shuts off.
Plug
The temperature probe has a skewer-like probe at
one end and a plug at the other end that goes into the
outlet in the oven.
Handles
(appearance may vary)
After preparing the meat and placing it on a trivet or
on the broiler pan grid, follow these directions for
proper probe placement.
2. Insert the probe into
the meat up to the
point marked off
with your finger. It
should not touch the
bone, fat or gristle.
1. Lay the probe on the
outside of the meat
along the top or side
and mark with your
finger where the edge
of the meat comes to
on the probe. The point
should rest in the center
of the thickest meaty
part of the roast.
No more than 2 inches
of the probe, not
counting the handle,
should be left exposed
outside the meat.
Ham or Lamb
Casseroles or Fish
Poultry
Insert the probe into the meatiest
part of the inner thigh from below
and parallel to the leg of a whole
turkey.
Insert the probe into the center
of dishes such as meat loaf or
casseroles. When cooking fish,
insert the probe from just above
the gill into the meatiest area,
parallel to the backbone.
For roasts with no bone, insert the
probe into the meatiest part of the
roast. For bone-in ham or lamb,
insert the probe into the center of
the lowest large muscle or joint.
(continued next page)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
ROASTING WITH THE PROBE
(continued)
How to Set the Oven When Using the Temperature Probe
The display will flash if the probe is inserted into
the outlet and you have not set a probe temperature
and pressed START.
8. When the internal temperature of the meat
CLEAR
OFF
reaches the temperature you have set, the
probe and the oven turn off and the oven
control signals. To stop the signal, press
CLEAR/OFF. Use hot pads to remove the
probe from the food. Do not use tongs to
pull on it–they might damage it.
1. Insert the probe
into the meat.
2. Plug the probe into
the outlet in the
oven. Make sure
it’s pushed all the
way in. Close the
oven door.
CAUTION: To prevent possible burns, do not
unplug the probe from the outlet until the oven has
cooled. Do not store the probe in the oven.
NOTE: You can use the timer even though you
cannot use timed oven operations.
3. Press PROBE.
To change the oven temperature during the
roasting cycle, press BAKE and set the new
temperature.
PROBE
4. Press the number pads to set the internal
meat temperature.
5. Press BAKE.
BAKE
6. Press the number pads to set the oven
temperature.
7. Press START.
START
The word “LO” will be in the display.
After the internal temperature of the
meat reaches 100°F., the changing
internal temperature will be shown
in the display.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Roasting Questions and Answers
Q. Is it necessary to check for doneness with a meat
thermometer?
Q. Do I need to preheat my oven each time I cook
a roast or poultry?
A. Checking the finished internal temperature at
the completion of cooking time is recommended
if you did not use the probe while cooking.
Temperatures are shown in the Roasting Guide.
For roasts over 8 lbs., check with thermometer at
half-hour intervals after half the cooking time
has passed.
A. It is not necessary to preheat your oven.
Q. When buying a roast, are there any special tips
that would help me cook it more evenly?
A. Yes. Buy a roast as even in thickness as possible, or
buy rolled roasts.
Q. Can I seal the sides of my foil “tent” when
roasting a turkey?
Q. Why is my roast crumbling when I try to
carve it?
A. Sealing the foil will steam the meat. Leaving it
unsealed allows the air to circulate and brown
the meat.
A. Roasts are easier to slice if allowed to cool 10 to 20
minutes after removing them from the oven.
Be sure to cut across the grain of the meat.
ROASTING GUIDE
Frozen Roasts
Frozen roasts of beef, pork, lamb, etc., can be started
without thawing, but allow 10 to 25 minutes per
pound additional time (10 minutes per pound for
roasts under 5 pounds, more time for larger roasts).
Make sure poultry is thawed before roasting.
Unthawed poultry often does not cook evenly.
Some commercial frozen poultry can be cooked
successfully without thawing. Follow the directions
given on the package label.
Oven
Approximate Roasting Time
in Minutes per Pound
Internal
Temperature °F.
Type
Temperature Doneness
Meat
3 to 5 lbs.
24–33
35–39
40–45
21–25
25–30
30–35
35–45
35–45
6 to 8 lbs.
Tender cuts; rib, high quality
sirloin tip, rump or top round*
325°
325°
Rare:
18–22
22–29
30–35
20–23
24–28
28–33
30–40
30–40
140°–150°†
150°–160°
170°–185°
140°–150°†
150°–160°
170°–185°
170°–180°
170°–180°
115°–125°
Medium:
Well Done:
Rare:
Lamb leg or bone-in shoulder*
Medium:
Well Done:
Well Done:
Well Done:
To Warm:
Veal shoulder, leg or loin*
Pork loin, rib or shoulder*
Ham, precooked
325°
325°
325°
17–20 minutes per pound (any weight)
Poultry
Chicken or Duck
Chicken pieces
3 to 5 lbs.
35–40
Over 5 lbs.
325°
350°
Well Done:
Well Done:
30–35
185°–190°
185°–190°
In thigh:
35–40
10 to 15 lbs.
18–25
Over 15 lbs.
15–20
Turkey
325°
Well Done:
185°–190°
*For boneless rolled roasts over 6 inches thick, add 5 to 10 minutes per pound to times given above.
†The U. S. Department of Agriculture says “Rare beef is popular, but you should know that cooking it to only 140°F. means
some food poisoning organisms may survive.” (Source: Safe Food Book. Your Kitchen Guide. USDA Rev. June 1985.)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
BROILING
Broiling is cooking food by intense radiant heat
from the upper broil element in the oven. Most
fish and tender cuts of meat can be broiled. Follow
these directions to keep spattering and smoking to
a minimum.
Position a shelf on recommended shelf position as
suggested in the Broiling Guide. Most broiling is done
on C position, but if your oven is connected to 208
volts, you may wish to use a higher position.
Leave the door open to the
broil stop position. The door
stays open by itself, yet the
proper temperature is
If the meat has fat or gristle around the edge, cut
vertical slashes through both about 2 inches apart. If
desired, the fat may be trimmed, leaving a layer about
1/8 inch thick.
maintained in the oven.
Place the meat on the broiler grid in the broiler pan.
Always use the grid so the fat drips into the broiler
pan; otherwise the juices may become hot enough to
catch on fire.
Turn the food using tongs only once during broiling.
Time the foods for the first side according to the
Broiling Guide.
Turn the food, then use the times given for the
second side as a guide to the preferred doneness.
NOTE: Broil will not work if the temperature probe
is plugged in.
How to Set Your Oven for Broiling
1. Press BROIL HI/LO.
3. Press START.
BROIL
START
HI/LO
2. Press BROIL HI/LO again (alternates
between LO Broil and HI Broil).
4. Press CLEAR/OFF when broiling
CLEAR
OFF
is finished.
Use of Aluminum Foil
You can use aluminum foil to line your broiler pan
and broiler grid. However, you must mold the foil
tightly to the grid and cut slits in it just like the grid.
Without the slits, the foil will prevent fat and meat
juices from draining into the broiler pan. The juices
could become hot enough to catch on fire. If you do
not cut the slits, you are frying, not broiling.
Questions and Answers
Q. Why are my meats not turning out as brown
as they should?
Q. When broiling, is it necessary to always use
a grid in the pan?
A. In some areas, the power (voltage) to the oven may
be low. In these cases, preheat the broil element for
10 minutes before placing the broiler pan with
food in the oven. Check to see if you are using the
recommended shelf position. Broil for the longest
period of time indicated in the Broiling Guide.
Turn the food only once during broiling. You may
need to move the food to a higher shelf position.
A. Yes. Using the grid suspends the meat over the
pan. As the meat cooks, the juices fall into the
pan, thus keeping meat drier. Juices are protected
by the grid and stay cooler, thus preventing
excessive spatter and smoking.
Q. Should I salt the meat before broiling?
A. No. Salt draws out the juices and allows them to
evaporate. Always salt after cooking. Piercing
meat with a fork also allows juices to escape.
Turn the meat with tongs instead of a fork.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
BROILING GUIDE
• Always use the broiler pan and grid that comes with
• When arranging food on the pan, do not let fatty
edges hang over the sides because the dripping fat
will soil the oven.
your oven. It is designed to minimize smoking and
spattering by trapping juices in the shielded lower
part of the pan.
• The broiler does not need to be preheated. However,
for very thin foods, or to increase browning, preheat
if desired.
• The oven door should be open to the broil stop
position.
• For steaks and chops, slash fat evenly around the
outside edges of the meat. To slash, cut crosswise
through the outer fat surface just to the edge of the
meat. Use tongs to turn meat over to prevent
piercing the meat and losing juices.
• Use LO Broil to cook foods such as poultry or thick
pork chops thoroughly without over-browning them.
• Frozen steaks can be broiled by positioning the oven
shelf at next lowest shelf position and increasing
1
2
cooking time given in this guide 1 ⁄ times per side.
• If desired, marinate meats or chicken before
broiling, or brush with barbecue sauce last 5 to
10 minutes only.
• If your oven is connected to 208 volts, rare
steaks may be broiled by preheating the broiler
and positioning the oven shelf one position higher.
Quantity and/or
Thickness
1/2 lb. (about 8
thin slices)
Shelf
First Side
Second Side
Food
Bacon
Position Time, Minutes Time, Minutes Comments
1
1
2
2
C
4 ⁄
4 ⁄
Arrange in single layer.
Ground Beef
Well Done
1 lb. (4 patties)
1/2 to 3/4 inch thick
Space evenly.
Up to 8 patties take about same time.
C
10
7
Beef Steaks
Rare
Medium
Well Done
Rare
Medium
Well Done
1 inch thick
C
C
C
C
C
C
6
8
5
6
Steaks less than 1 inch thick cook
through before browning. Pan frying
is recommended.
1
2
(1 to 1 ⁄ lbs.)
12
11
1
2
1 ⁄ inches thick
10
15
25
7–8
14–16
20–25
Slash fat.
1
2
(2 to 2 ⁄ lbs.)
Chicken
1 whole
A
35
10–15
Reduce time about 5 to 10 minutes
per side for cut-up chicken. Brush
each side with melted butter. Broil
skin-side-down first.
1
2
(2 to 2 ⁄ lbs.),
split lengthwise
Bakery Products
Bread (Toast) or
Toaster Pastries
English Muffins
1
2
2 to 4 slices
1 pkg. (2)
2 (split)
C or D
1 ⁄ –2
1/2
Space evenly. Place English muffins
cut-side-up and brush with butter,
if desired.
Cut through back of shell. Spread
open. Brush with melted butter before
broiling and after half of broiling time.
C or D
B
3–4
13–16
Lobster Tails
2–4
Do not
turn over.
(6 to 8 oz. each)
Fish
1-lb. fillets 1/4 to
1/2 inch thick
C
5
5
Handle and turn very carefully. Brush
with lemon butter before and during
cooking, if desired. Preheat broiler to
increase browning.
Ham Slices
(precooked)
1 inch thick
B
8
8
Increase time 5 to 10 minutes per side
1
2
for 1 ⁄ inch thick or home cured ham.
Pork Chops
Well Done
2 (1/2 inch thick)
2 (1 inch thick),
about 1 lb.
C
B
10
13
10
13
Slash fat.
Lamb Chops
Medium
2 (1 inch thick),
C
C
C
B
10
12
14
17
9
Slash fat.
Well Done
about 10 to 12 oz.
10
1
2
Medium
Well Done
2 (1 ⁄ inches thick),
12
12–14
about 1 lb.
Wieners and
similar precooked
sausages, bratwurst
1-lb. pkg. (10)
C
6
1–2
If desired, split sausages in half
lengthwise; cut into 5- to 6-inch pieces.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE SELF-CLEANING OVEN
Normal Cleaning Time: 4 hours
Before a Clean Cycle
1. Remove the probe, broiler pan, broiler grid, all
cookware and any aluminum foil from the
oven—they can’t withstand the high cleaning
temperatures.
3. Clean spatters or soil on the oven front frame and
the oven door outside the gasket with a dampened
cloth. The oven front frame and the oven door
outside the gasket do not get cleaned by the self-
clean cycle. On these areas, use detergent and hot
water or a soap-filled steel wool pad. Rinse well
with a vinegar and water solution. This will help
prevent a brown residue from forming when the
oven is heated. Buff these areas with a dry cloth.
Do not clean the gasket. Never use a commercial
oven cleaner in or around the self-cleaning oven.
NOTE: The oven shelves may be cleaned in the
self-cleaning oven. However, they will darken, lose
their luster and become hard to slide. Wipe the
shelf supports with cooking oil after self-cleaning
to make shelves slide more easily.
2. Wipe up heavy soil on the oven bottom. If you use
soap, rinse thoroughly before self-cleaning to
prevent staining.
Clean the outside front of the oven door with
soap and water. Also use soap and water to clean
under the oven vent grille. Do not use abrasives
or oven cleaners.
OVEN
TIME CONTROLS
BROIL
HI/LO
COOKING
TIME
DELAY
START
START
BAKE
OVEN
LIGHT
ON/OFF
1
6
2
7
3
8
4
9
5
0
KITCHEN
SELF
CLEAR
OFF
PROBE
CLOCK
TIMER
CLEAN
ON/OFF
Make sure the oven light bulb cover is in place.
Oven
vent
Do not rub or clean the door gasket—
Oven
vent
the fiberglass material of the gasket has an
grille
extremely low resistance to abrasion. An intact
and well-fitting oven door gasket is essential for
energy-efficient oven operation and good baking
results. If you notice the gasket becoming worn,
frayed or damaged in any way or if it has become
displaced on the door, you should have it replaced.
Oven
light
Oven
front
frame
Area
inside
gasket
Do not let water run down through openings in
the top of the door. To help prevent water from
getting in these slots when cleaning, open the door
as far as it will go.
4. Close the oven door and make sure the oven light
is off. If the oven light is not turned off, the life of
the bulb will be shortened or it may burn out
immediately. The door latches automatically after
the clean cycle is set.
Area outside
gasket
Openings
in door
Oven door
gasket
Do not use commercial oven cleaners or oven
protectors in or near the self-cleaning oven.
A combination of any of these products plus the
high clean-cycle temperature may damage the
porcelain finish of the oven.
Important
The oven door must be closed and all controls must
be set correctly for the cycle to work properly.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Set Oven for Cleaning
4. Press START.
Easy Steps:
START
The door locks automatically. The
display will show the clean time
remaining. It will not be possible to
open the oven door until the temperature
drops below the lock temperature and
the LOCKED DOOR light goes off.
1. Press SELF CLEAN.
2. Press the number pads to set the clean time.
3. Press START.
1. Follow the steps in the Before a Clean
5. When the LOCKED DOOR light is off,
Cycle section.
open the door.
2. Press SELF CLEAN.
SELF
NOTE:
CLEAN
3. Press the number pads to set the
• You can find out when the clean cycle
will start by pressing DELAY START.
clean time, if a time other than
4 hours is needed.
DELAY
START
• The display will flash and the control
will beep if you set the clean cycle and
forget to close the oven door.
Clean time is normally 4 hours. You can
change the clean time to any time
between 3 to 5 hours, depending on the
amount of soil in your oven.
How to Set Delay Start of Cleaning
4. Press DELAY START.
Easy Steps:
DELAY
START
1. Press SELF CLEAN.
5. Press the number pads to set the time of
2. Press the number pads to set the clean time.
3. Press DELAY START.
day you want the clean cycle to start.
6. Press START.
START
4. Press the number pads to set the start time.
5. Press START.
The door locks automatically. The
display will show the start time. It will
not be possible to open the oven door
until the temperature drops below the
lock temperature and the LOCKED
DOOR light goes off.
Delay Start is setting the oven to start the clean
cycle automatically at a later time than the present
time of day.
NOTE: Before beginning, make sure the oven clock
shows the correct time of day.
7. When the LOCKED DOOR light is off,
open the door.
1. Follow the steps in the Before a Clean
(continued next page)
Cycle section.
2. Press SELF CLEAN.
SELF
CLEAN
3. Press the number pads to set the
clean time.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE SELF-CLEANING OVEN
(continued)
To Stop a Clean Cycle
1. Press CLEAR/OFF.
2. When the oven has cooled below the locking
temperature and the LOCKED DOOR light goes
off, open the door.
CLEAR
OFF
After Self-Cleaning
You may notice some white ash in the oven. Just wipe
it up with a damp cloth after the oven cools.
NOTE:
• No functions can be programmed before the door
automatically unlocks.
If white spots remain, remove them with a soap-filled
steel wool pad. Be sure to rinse thoroughly with a
vinegar and water mixture. These deposits are usually
a salt residue that cannot be removed by the clean cycle.
• If the shelves have become hard to slide, wipe the
shelf supports with cooking oil.
If the oven is not clean after one clean cycle,
repeat the cycle.
Questions and Answers
Q. If my oven clock is not set to the correct time
of day, can I still self-clean my oven?
Q. What causes the hair-like lines on the enameled
surface of my oven?
A. If the clock is not set to the correct time of day
you will not be able to set a delay clean to end
at a specific time.
A. This is a normal condition, resulting from
heating and cooling during cleaning. These lines
do not affect how your oven performs.
Q. Can I use commercial oven cleaners on any
part of my self-cleaning oven?
Q. Why do I have ash left in my oven after
cleaning?
A. No cleaners or coatings should be used around
any part of this oven. If you do use them and do
not thoroughly rinse the oven with water, wiping it
absolutely clean afterward, the residue can scar
the oven surface and damage metal parts the next
time the oven is automatically cleaned.
A. Some types of soil will leave a deposit which is
ash. It can be removed with a damp sponge or
cloth.
Q. My oven shelves do not slide easily. What is
the matter?
A. After many cleanings, the oven shelves will lose
their luster and become hard to slide. To make the
shelves slide more easily, wipe the shelf supports
with cooking oil.
Q. What should I do if excessive smoking occurs
during cleaning?
A. This is caused by excessive soil. Turn the oven
off. Open the windows to rid the room of smoke.
Wait until the oven has cooled and the words
“LOCKED DOOR” are off in the display. Wipe
up the excess soil and reset the clean cycle.
Q. My oven shelves have become gray after the
self-clean cycle. Is this normal?
A. Yes. After the self-clean cycle, the shelves will
lose some luster and discolor to a deep gray color.
Q. Is the “crackling” or “popping” sound I hear
during cleaning normal?
A. Yes. This is the sound of the metal heating
and cooling during both the cooking and
cleaning functions.
Q. Should there be any odor during the cleaning?
A. Yes, there will be an odor during the first
few cleanings. Failure to wipe out excessive soil
might also cause a strong odor when cleaning.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND CLEANING
Proper care and cleaning are important so your oven
BE SURE ELECTRICAL POWER IS OFF AND
ALL SURFACES ARE COOL BEFORE
CLEANING ANY PART OF THE OVEN.
will give you efficient and satisfactory service. Follow
these directions carefully in caring for your oven to
assure safe and proper maintenance.
Broiler Pan and Grid
After broiling, remove the broiler pan and grid from
the oven. Remove the grid from the pan. Carefully
pour the grease from the pan into a proper container.
Wash and rinse the broiler pan and grid in hot water
with a soap-filled or plastic scouring pad.
Do not store a soiled pan and grid anywhere in
the oven.
If food has burned on, sprinkle the grid with
detergent while hot and cover with wet paper
towels or a dishcloth. Soaking the pan will remove
burned-on foods.
Both the broiler pan and grid can also be cleaned in
the dishwasher.
Do not clean the broiler pan or grid in the self-
cleaning oven.
Both the broiler pan and grid may be cleaned with a
commercial oven cleaner.
Oven Light Replacement
CAUTION: Before replacing your oven light bulb,
disconnect the electrical power for your oven at
the main fuse or circuit breaker panel.
To remove:
• Hold your hand under the cover so it doesn’t fall
when released. With fingers of the same hand, firmly
push back the wire cover holder. Lift off the cover.
Be sure to let the light cover and bulb cool completely
before removing or replacing them. When in use, light
bulbs can become warm enough to break if touched
with a moist cloth or towel. When cleaning, avoid
touching warm lights with cleaning cloths if the light
cover is removed.
• DO NOT REMOVE ANY SCREWS.
• Replace bulb with 40-watt home appliance bulb.
To replace cover:
• Place it into the groove of the light receptacle. Pull
the wire forward to the center of cover until it snaps
in place. When in place, the wire holds the cover
firmly. Be certain the wire is in the depression in the
center of the cover.
The oven light is covered
with a removable glass
cover which is held in
place with a wire.
Remove the oven door, if
desired, to reach the
cover easily.
• Connect the electrical power to the oven.
Wire cover holder
Oven Heating Elements
Do not clean the bake element or the broil element.
Broil element
Bake element
Any soil will burn off when the elements are heated.
The bake element can be lifted gently to clean the
oven floor. If spillovers, residue or ash accumulate
around the bake element gently wipe around the
element with warm water.
(continued next page)
29
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND CLEANING
(continued)
Lift-Off Oven Door
The oven door is
• The area outside the gasket can be cleaned with a
removable, but it is
heavy. You may need help
removing and replacing
the door. Do not lift the
door by the handle. This
can cause the glass to
break or can cause
soap-filled scouring pad.
• Do not rub or clean the door gasket—the fiberglass
material of the gasket has an extremely low
resistance to abrasion. An intact and well-fitting
oven door gasket is essential for energy-efficient
oven operation and good baking results. If you
notice the gasket becoming worn, frayed or damaged
in any way or if it has become displaced on the door,
you should have it replaced.
damage to the door.
To remove the door,
open it a few inches to the special stop position that
will hold the door open. Grasp firmly on each side
and lift the door straight up and off the hinges.
NOTE: The gasket is designed with a gap at the
bottom to allow for proper air circulation.
NOTE:
• Be careful not to place hands between the hinge and
the oven door frame as the hinge could snap back
and pinch fingers.
Inside gasket
Gasket
• While working in the oven area, cover the hinges
with towels or empty paper towel rolls to prevent
pinched fingers and chipping the porcelain enamel
on the frame.
Outside gasket
To replace the door, make sure the hinges are in the
special stop position. Position the slots in the bottom
of the door squarely over the hinges. Then lower the
door slowly and evenly over both hinges at the same
time. If hinges snap back against the oven frame, pull
them back out.
Outside of the door:
• Use soap and water to thoroughly clean the top,
sides and front of the oven door. DO NOT let water
run down through openings in the top of the door.
Rinse well. You may also use a glass cleaner to
clean the glass on the outside of the door.
TO CLEAN THE DOOR:
Inside of the door:
• Spillage of marinades, fruit juices, tomato sauces
and basting materials containing acids may cause
discoloration and should be wiped up immediately.
When surface is cool, clean and rinse.
• Because the area inside the gasket is cleaned during
the self-clean cycle, you do not need to clean this by
hand. Any soap left on the liner causes additional
stains when the oven is heated.
• Do not use oven cleaners, cleansing powders or
harsh abrasives on the outside of the door.
Oven Shelves
Clean the shelves with a mild abrasive cleanser or
steel wool. After cleaning, rinse the shelves with
clean water and dry with a clean cloth.
Oven shelf
NOTE: The oven shelves may be cleaned in self-
cleaning oven. However, they will darken, lose their
luster and become hard to slide if cleaned during the
self-cleaning cycle.
Wipe the shelf supports with cooking oil after self-
cleaning to make the shelves slide more easily.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Probe
The temperature probe may be cleaned with soap and
water or a soap-filled scouring pad. Cool the
temperature probe before cleaning. Scour stubborn
spots with a soap-filled scouring pad, rinse and dry.
Do not immerse the temperature probe in water.
Do not store the temperature probe in the oven.
Control Panel
It’s a good idea to wipe the control panel after each
use of the oven. Clean with mild soap and water or
vinegar and water, rinse with clean water and polish
dry with a soft cloth.
Do not use abrasive cleansers, strong liquid
cleaners, plastic scouring pads or oven cleansers
on the control panel—they will damage the finish.
A 50/50 solution of vinegar and hot water works well.
Metal Parts
Do not use steel wool, abrasives, ammonia or
commercial oven cleaners. To safely clean surfaces,
wash, rinse and then dry with a soft cloth.
Glass Window
To clean the outside glass of the oven window, use a glass cleaner. Rinse
and polish with a dry cloth.
Do not allow the water or cleaner to run down inside openings in the
glass or the openings in the top of the oven door while cleaning.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
QUESTIONS?
USE THIS PROBLEM SOLVER
PROBLEM
POSSIBLE CAUSE
“F–AND A NUMBER
OR LETTER” FLASH
IN THE DISPLAY
• This is a function error code. Press CLEAR/OFF. Allow the oven to cool one
hour. Place the oven back into operation.
• Disconnect all power to the oven for 5 minutes and then reconnect power. If the
failure code repeats, call for service.
CONTROL SIGNALS AFTER • This is reminding you to press BAKE and then enter a bake temperature.
ENTERING COOKING TIME
OR DELAY START TIME
• This is reminding you to enter a bake temperature after having pressed BAKE.
DISPLAY GOES BLANK
DISPLAY FLASHES
• The circuit breaker in your house has been tripped, or a fuse has been blown.
• Power failure. Reset the clock.
UNABLE TO GET THE
DISPLAY TO SHOW “SF”
• BAKE and BROIL HI/LO must be pressed at the same time and held for
2 seconds.
“PROBE” APPEARS IN
THE DISPLAY
• The probe is not inserted properly into the oven receptacle or food.
• This is reminding you to enter a probe temperature after plugging in the probe.
“LOCK DOOR” FLASHES
• Oven door not closed after self-clean cycle is selected.
“LOCKED DOOR” FLASHES • Door is still locked and you are trying to enter an oven cooking operation.
OVEN LIGHT DOES
NOT WORK
• The light bulb is loose or defective. Tighten or replace.
• The pad operating the oven light is broken. Call for service.
OVEN WILL NOT SET A
SELF-CLEAN CYCLE
• Oven temperature is too high to set self-clean operation.
Allow the oven to cool to room temperature and reset the controls.
• The probe is plugged into the outlet in the oven. Remove the probe from the oven.
OVEN NOT CLEAN
AFTER CLEAN CYCLE
• Oven controls not set properly. See the Operating the Self-Cleaning
Oven section.
• Heavily soiled ovens require 4 to 5 hours of clean time.
• Heavy spillovers should be cleaned up before starting clean cycle.
DOOR WILL NOT
OPEN AFTER
SELF-CLEAN CYCLE
• When the temperature has fallen below the locking temperature door can
be opened.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEM
POSSIBLE CAUSE
OVEN WILL NOT WORK
• The circuit breaker in your house has been tripped, or a fuse has been blown.
• The oven controls are not properly set.
FOOD DOES NOT BROIL
PROPERLY
• Oven controls not set properly. See the Broiling section.
• Door not left open to the broil stop position as recommended.
• Improper shelf position being used. See the Broiling Guide.
• Food is being cooked on a hot pan or on cookware not suitable for broiling.
• Low voltage. See the Broiling section.
• Aluminum foil used on the broiler pan and grid has not been fitted properly
and slit as recommended.
FOOD DOES NOT ROAST
OR BAKE PROPERLY
• Oven controls not set properly. See the Baking or Roasting section.
• Shelf position is incorrect. See the Baking or Roasting section.
• Incorrect cookware or cookware of improper size is being used.
• Oven thermostat needs adjustment. See the Adjust the Oven Thermostat—
Do It Yourself section.
OVEN TEMPERATURE
TOO HOT OR TOO COLD
• Oven thermostat needs adjustment. See the Adjust the Oven Thermostat—
Do It Yourself section.
“BURNING” OR “OILY”
ODOR EMITTING FROM
OVEN WHEN TURNED ON
• This is normal in a new oven and will disappear in time. To speed the process,
set a self-clean cycle for a minimum of 3 hours. See the Operating the Self-
Cleaning Oven section.
STRONG ODOR
• An odor from the insulation around the inside of the oven is normal for the
first few times the oven is used. This is temporary.
FAN NOISE
• A cooling fan may automatically turn on and off to cool internal parts.
This is normal and the fan may continue to run even after the oven is off.
If you need more help…call, toll free:
GE Answer Center®
800.626.2000
consumer information service
33
Download from Www.Somanuals.com. All Manuals Search And Download.
We’ll Be There
With the purchase of your new GE appliance, receive the assurance that if you ever need
information or assistance from GE, we’ll be there. All you have to do is call—toll-free!
GE Answer Center®
800.626.2000
Whatever your question about any GE major appliance, GE Answer Center®
information service is available to help. Your call—and your question—will be
answered promptly and courteously. And you can call any time. GE Answer
Center® service is open 24 hours a day, 7 days a week.
In-Home Repair Service
800-GE-CARES (800-432-2737)
A GE consumer service professional will provide expert repair service,
scheduled at a time that’s convenient for you. Many GE Consumer Service
company-operated locations offer you service today or tomorrow, or at your
convenience (7:00 a.m. to 7:00 p.m. weekdays, 9:00 a.m. to 2:00 p.m. Saturdays).
Our factory-trained technicians know your appliance inside and out—so most
repairs can be handled in just one visit.
For Customers With Special Needs…
2’ 6"
TBXTOLITE
ON WALL
SINGLE CONTROL
FAUCET
800.626.2000
6’ 10"
8"
5"
6"
5"
7"
1’ 0"
Upon request, GE will provide
Braille controls for a variety of GE
appliances, and a brochure to
assist in planning a barrier-free
kitchen for persons with limited
mobility. To obtain these items,
free of charge, call 800.626.2000.
Consumers with impaired hearing or speech who have
access to a TDD or a conventional teletypewriter may
call 800-TDD-GEAC (800-833-4322) to request
information or service.
1/8
3’ "
FLUORESCENT
FIXTURE
THIS LIGHT CAN
BE INSTALLED
IN BOTTOM OF
WALL CABINETS
2’ 10"
SECTION A-A
R SHALLOW DEPTH SINKS (6") WITH REAR DRAIN.
SINK SHOULD ALSO BE UNDERCOATED
SCALE 1’ 1"
=
Service Contracts
800-626-2224
You can have the secure feeling that GE Consumer Service will still be there
after your warranty expires. Purchase a GE contract while your warranty is still
in effect and you’ll receive a substantial discount. With a multiple-year contract,
you’re assured of future service at today’s prices.
Parts and Accessories
800-626-2002
Individuals qualified to service their own appliances
can have parts or accessories sent directly to their home.
The GE parts system provides access to over 47,000
parts…and all GE Genuine Renewal Parts are fully
warranted. VISA, MasterCard and Discover cards
are accepted.
User maintenance instructions contained in this guide
cover procedures intended to be performed by any user.
Other servicing generally should be referred to qualified
service personnel. Caution must be exercised, since
improper servicing may cause unsafe operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Staple sales slip or cancelled
check here. Proof of original
purchase date is needed to obtain
service under warranty.
YOUR MONOGRAM ELECTRIC OVEN
WARRANTY
FULL ONE-YEAR WARRANTY
WHAT IS COVERED
***********************
This warranty is extended to the original
purchaser and any succeeding owner
for products purchased for ordinary
home use in the 48 mainland states,
Hawaii and Washington, D.C. In
For one year from date of original
purchase, we will provide, free of
charge, parts and service labor in
your home to repair or replace any
part of the oven that fails because
of a manufacturing defect.
Alaska the warranty is the same
except that it is LIMITED because you
must pay to ship the product to the
service shop or for the service
technician’s travel costs to your home.
All warranty service will be provided by
our Factory Service Centers or by our
authorized Customer Care® servicers
during normal working hours.
Should your appliance need service,
during warranty period or beyond, call
800-GE-CARES (800-432-2737).
• Service trips to your home to teach
• Replacement of house fuses or
WHAT IS NOT
COVERED
you how to use the product.
resetting of circuit breakers.
Read your Use and Care
material. If you then have any
questions about operating the
product, please contact your
dealer or our Consumer Affairs
office at the address below, or
call, toll free:
• Failure of the product if it is used
for other than its intended purpose
or used commercially.
• Damage to product caused by
accident, fire, floods or acts of God.
WARRANTOR IS NOT
RESPONSIBLE FOR
CONSEQUENTIAL DAMAGES.
GE Answer Center®
800.626.2000
consumer information service
• Improper installation.
If you have an installation problem,
contact your dealer or installer.
You are responsible for providing
adequate electrical, gas,
exhausting and other connecting
facilities as described in the
Installation Instructions provided
with the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion
may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
To know what your legal rights are in your state, consult your local or state consumer affairs office or your state’s Attorney General.
Warrantor: General Electric Company
If further help is needed concerning this warranty, write:
Manager—Consumer Affairs, GE Appliances, Louisville, KY 40225
Download from Www.Somanuals.com. All Manuals Search And Download.
Pub. No. 49-8758
Part No. 164D3333P017
5-96 CG
TM
Printed in LaFayette, GA
Monogram.
General Electric Company
Louisville, KY 40225
Download from Www.Somanuals.com. All Manuals Search And Download.
|