USER’S MANUAL
WIDE PLASMA DISPLAY
P42XHA58E SERIES
P50XHA58E SERIES
Page
Before Use
• OTHER ADJUSTMENTS........................................... E-23
• INITIALIZATION OF USER ADJUSTMENT VALUE.. E-27
• OPTIONS................................................................... E-28
Usage
• BASIC OPERATIONS ............................................... E-10
• WATCHING PICTURES ON THE WIDE SCREEN... E-12
• CLEANING AND MAINTENANCE............................. E-31
Adjustments
• ADJUSTMENT MENU............................................... E-14
• BASIC PROCEDURES OF ADJUSTMENT MENU... E-15
• ADJUSTING THE PICTURE ..................................... E-16
• ADJUSTING SCREEN POSITION AND SIZE........... E-21
Before using the display, read this manual carefully so that you know how to use the display correctly.
Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety
precautions (see the separate "Safety Precautions" manual).
Keep this manual where the user can see it easily.
* Installation and removal require special expertise. Consult your product dealer for details.
* When “English” is selected at “Language” of the on-screen display, “colour” will be displayed in the case of the E model and
“color” will be displayed for all other models.
The notation used in this user’s manual is “color”.
* The last digit of MODEL NO. (10 digit alphanumeric characters) indicated on the product means the body color indication
alphabet or the management number.
* The Illustration of external appearance is for 42” model.
Please acknowledge some differences in the actual product of other models.
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
• To prevent the plasma display’s internal components from overheating, make sure that the plasma display is installed in a well-ventilated
location.
• Be sure to use the optional stand, wall-mounting unit or the other mounting unit when installing the plasma display. Also, be sure that your
dealer performs the installation.
• See the appropriate instruction manual for additional information on the mounting hardware you select.
• To prevent an accident and ensure safety in the event of an earthquake, fix the plasma display securely into the position as described below.
• Use the diagram below to determine how much space is needed to ensure proper heat radiation. This is a minimum space requirement;
therefore, provide at least as much space as indicated below.
* Make sure that the plasma display is installed in a location where the temperature can be maintained between 0°C and 40°C (between
32°F and 104°F)
* Never attempt to tilt the plasma display sideways or backward.
* To prevent the power cord and other cables from being accidentally pulled, make sure that they run along the wall or through corners.
* To prevent accidents and ensure safety in the event of an earthquake, secure the plasma display to prevent it from tipping over.
Display Section
Front
Side
Upper
10
(cm)
(cm)
10
10
Wall
Left
Right
5
Lower
3.5
ATTACHING THE FERRITE CORES
• The ferrite cores are used to reduce noise. Attach them correctly as shown in the following illustrations.
• Be sure to turn off power of the plasma display and external equipment before making any connections.
• Carefully check the terminals for position and type before making any connections.
• Loose connectors can result in picture or color problems. Make sure that all connectors are securely inserted into their terminals.
2 large ferrite cores
When connecting the cord to the power input terminal, RS232C input
terminal, attach one of these ferrite cores to the cord and the cable near the
terminal.
Power Cord
Ferrite Core
RS232C Cable
Ferrite Core
2 small ferrite cores
When connecting a cable to the external speaker output terminal attach one
Ferrite Core
Ferrite Core
Note
•
•
The external view is meant to be a representation of the actual unit and is not to scale; therefore, it may differ from the actual shape and size of the product.
Due to the fragile and highly precise equipment, it is very important to pack properly before transportation using only the packing materials provided.
Reference
See P. E-28 for more information on options.
E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
PART NAMES AND FUNCTIONS
DISPLAY SECTION – FRONT
ꢀ Power indicator lamp
(Right section)
This lamp shows the state of the power supply.
Lit (red):
Stand-by state
Lit (green):
Power ON state
Flashing (red or green):
Malfunction (Flashes differently
depending on the type of
malfunction.)
ꢁ Remote control signal receiver
Receives signals from the remote control.
ꢂ Input mode selector button
ꢃ Input mode selector button
Switches between picture input modes.
ꢄ Volume + button
ꢅ Volume - button
Adjusts the audio volume.
ꢆ Wide screen selector button
Switches the screen over to a desired wide screen.
ꢇ ON/OFF button
Turns the power “ON” and “OFF (standby state)”.
ꢈ Ambient Sensor
Detects the brightness of ambient light.
It is important not to obstruct it for full functionality of the feature.
DISPLAY SECTION – BACK
ꢀ External speaker output terminal (EXT SP)
Connect this terminal to the optionally available speaker.
When connecting a cable, attach a ferrite core to the cable. (See
P. E-3.)
* See the speaker instruction manual for more information.
Warning
If the power indicator lamp flashes red or green, this signifies that the plasma display has developed a problem. When this happens, be sure to remove
the power plug from the receptacle and contact your dealer. In this circumstance, leaving the plasma display power ON can result in fire or electric
shock.
E-4
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY SECTION – BOTTOM
ꢀ
ꢉ/ I power switch
If this button is pressed when the power indicator lamp is off, the indicator lamp will light.
The power can be turned on and the standby mode selected by using the remote control or the control panel of the display.
If this button is pressed when the power indicator lamp is lit, the indicator lamp will go out.
*Power is still supplied to parts of the display even if the indicator lamp is off.
ꢁ HDMI input terminal (VIDEO5 INPUT/HDMI)
ꢂ HDMI input terminal (VIDEO6 INPUT/HDMI)
Connect this terminal to the HDMI output terminal of DVD recorder/player or other video equipment.
If the HDMI output is connected, an Audio signal cable does not need to be connected.
ꢃ RS-232C terminal (RS-232C)
This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.
When connecting a cable, attach a ferrite core to the cable. (See P. E-3.)
ꢄ RGB1 input terminal (RGB1 INPUT/mD-sub)
Connect this terminal to the output terminal of a PC, set-top box, game, etc.
ꢅ Component video input terminal (VIDEO3 INPUT)
ꢆ Component video input terminal (VIDEO4 INPUT)
Connect this terminal to the Component video output terminal of DVD recorder/player or satellite receiver.
ꢇ Video input terminal (VIDEO1 INPUT)
Connect this terminal to the video output terminal of your VCR.
ꢈ S-Video input terminal (VIDEO2 INPUT)
Connect this terminal to the S-video output terminal of your VCR.
ꢊ Audio3 input terminal (AUDIO3 INPUT)
ꢋ Audio2 input terminal (AUDIO2 INPUT)
ꢌ Audio1 input terminal (AUDIO1 INPUT)
Connect this terminal to the audio output terminal of VCR or PC, etc.
" Power input terminal
Connect this terminal to the power cord supplied with the plasma display.
When connecting the cord, attach a ferrite core to the cord. (See P. E-3.)
• The table below shows the settings of Audio inputs. (Factory setting)
* For changing of Audio input settings, see Audio Input on P. E-25.
Video input
RGB1(mD-sub)
Audio input
Audio1
Audio2
Audio2
Audio3
Audio3
Video1(Video)
Video2(S-video)
Video3(Component Video)
Video4(Component Video)
Video5(HDMI)
Audio4(HDMI)
Audio5(HDMI)
Video6(HDMI)
Note
• The illustration of external appearance is for 42” model. Please acknowledge some differences in the actual product of other models.
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
PART NAMES AND FUNCTIONS (Continued)
DESCRIPTION OF INPUT TERMINALS
mD-sub input terminal
(RGB1 INPUT/mD-sub)
Pin No.
Input signal
Red
Pin No.
Input signal
1
9
—
2
3
4
5
6
7
8
Green
Blue
10
Ground
—
11
—
12
—
Ground
Ground
Ground
Ground
13
Horizontal synchronization
14
Vertical synchronization
15
—
Frame
Ground
RS-232C terminal (RS-232C)
Pin No.
Signal
1
2
3
4
5
6
7
8
9
DCD (Data Carrier Detect)
RD (Received Data)
TD (Transmit Data)
DTR (Data Terminal ready)
GND (Ground)
DSR (Data Set Ready)
RTS (Request To send)
CTS (Clear To Send)
RI (Ring Indication)
HDMI input terminal (VIDEO5,6 INPUT/HDMI)
Pin No.
Input signal
Pin No.
Input signal
T.M.D.S. Clock Shield
T.M.D.S. Clock–
CEC
1
T.M.D.S. Data2+
T.M.D.S. Data2 Shield
T.M.D.S. Data2–
11
2
12
3
13
4
T.M.D.S. Data1+
T.M.D.S. Data1 Shield
T.M.D.S. Data1–
14
Reserve
5
15
DDC Clock
6
16
DDC Data
7
T.M.D.S. Data0+
T.M.D.S. Data0 Shield
T.M.D.S. Data0–
17
Ground (for +5V)
+5V Power
8
18
9
19
Hot Plug Detect
FG
10
T.M.D.S. Clock+
Frame
TRADEMARK INFOMATION
HDMI, the HDMI logo and High-Definition Multimedia interface are trademarks or registered
trademarks of HDMI Licensing LCC.
E-6
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
For details, see page
Î.
ꢀ
ꢁ
ꢀ
button
Î
E-10
Switches between Power On and Standby.
-
(MUTE button)
Î
E-10
Press to temporarily mute the audio.
To return the audio to normal, press this button once again, or press the
1
does the
2
3
work also.
ꢂ
(DISPLAY button)
Î
E-11
Press to display the input mode and screen size status.
The status is displayed for about five seconds.
ꢃ
ꢄ
ꢅ
ꢆ
ꢇ
ꢈ
ꢊ
4
(PICTURE MODE button)
Î
E-11
Press to switch the Picture Mode.
5
Press to recall a Picture Memory.
(PICTURE MEMORY button)
Î
E-11
ꢁ
(WIDE button)
Î
E-12
Press to switch the screen size.
" '
Press to select VIDEO1 - 6.
–
(Video input mode selector button)
Î
E-10
)
(RGB input mode selector button)
Î
E-11
Press to select RGB1.
12
Press to adjust the volume.
(Volume adjustment buttons)
;
Press to display or hide the menu screen.
Use for picture or audio adjustment.
(MENU button)
Î
E-15–E-27
ꢋ
ꢌ
<
Press to confirm the setting you made with the adjustment buttons.
(ENTER button)
Î
E-15–E-27
CDEF
Press to select the adjustment item or adjust the value in the menu screen.
(Adjustment buttons)
Î
E-15–E-27
Note
• Functions may not be available with some models and some device options.
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE REMOTE CONTROL (Continued)
PUTTING BATTERIES IN THE REMOTE CONTROL
(1) To remove the cover, slide it outwards
while pressing it down.
(2) Place two AA batteries in the remote
control. Make sure that the batteries are
properly oriented.
(3) Close the cover until it snaps into place.
PRECAUTIONS
To prevent malfunction, do not apply any form of severe shock to the remote control. To prevent malfunction or deformation, do not allow
the remote control to become wet and keep it away from hot surfaces or heating equipment. Do not clean the remote control using a cloth
dampened in a volatile solvent, such as benzene or thinner.
EFFECTIVE RANGE FOR THE REMOTE CONTROL
When using the remote control, be sure to point it directly at the plasma display's signal receiver. Make sure that there are no obstacles
between the remote control and the plasma display's signal receiver.
Upper
Lower
Display – front
Display – side
Left
Right
5 m (Front)
CAUTION
It is very important to use replacement batteries of the same type as the originally used. Do not use rechargeable batteries (Ni-Cd, etc.).
When disposing of used batteries, please comply with governmental regulations or environmental public institution’s rules that apply in your country/
area.
Note
• The remote control will not function properly if the batteries are dead. Be sure to replace them as needed.
• The remote control may not function properly if a high-frequency fluorescent lamp or the like is used. In this case, move the lamp or use the remote
control from a different position.
E-8
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT
DVD RECORDER/PLAYER, SATELLITE TUNER
• Connect the video signal cable to the HDMI input terminal, component video input terminal, S-video input terminal, or the video input terminal.
•
If the equipment to be connected is equipped with HDMI output terminal and component video output terminal, it is recommended to
connect to one side or the other. (If the HDMI output is connected, an Audio signal cable does not need to be connected.)
Antenna (commercially available product)
To component video output
To video output
To video input
To S-video output
To S-video input
To audio outputs
To audio inputs
To component video input
Display bottom
To HDMI input
To HDMI output
VCR/PC
• Connect the video signal cable to either the S-video input terminal or the video input terminal.
• If the unit to be connected is equipped with S-video output terminal, it is recommended to connect to the S-video terminal.
• As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase.
To audio output
To audio inputs
To RGB output
(mD-sub)
To video output
To S-video output
To RGB input
(mD-sub)
To audio outputs
To video
input
To S-video
input
To audio inputs
Display bottom
Note
• Unplug the power cord from the AC outlet before you connect external components.
• Also refer to the instructions for the component to be connected.
• When inputting audio, connect to the terminals corresponding to the used video input or RGB input.
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
TURNING THE POWER ON AND STAND-BY
Press
ꢉ/I to the left at the bottom of the display to the ONꢉstate.
1
2
3
4
The power lamp lights up.
Press
ꢀ
on the remote control.
The color of the power lamp changes from “Red” to “Green”.
Press
Select the video mode to input.
"
–
'
or
)
.
Press
ꢀ
when the power is ON.
* You can also use the buttons
on the display’s control
panel to perform these steps.
The color of the power lamp changes from “Green” to “Red” and the the power turns “OFF (Stand-
by state)”.
ADJUSTING THE VOLUME
Adjusting the volume
Press
1
to increase the volume.
Press
2
to reduce the volume.
* Note that the volume level remains stored even when you
turn OFF the power.
Muting the audio
When the volume adjustment button is
pressed
Press
-
.
The audio is removed.
* You can also use the buttons
on the display’s control
Press again to restore the audio to the original level.
panel to perform these steps.
The mute mode can also be released by pressing the volume buttons.
VIDEO INPUT MODE
Press
mode.
"
-
'
to select the input
1
You can select from VIDEO1 mode to VIDEO6
mode.
The video modes corresponding to each input
terminal are as follows.
• VIDEO1: Video
Video1 mode
• VIDEO2: S-video
• VIDEO3: Component video
• VIDEO4: Component video
• VIDEO5: HDMI
* You can also use the buttons
on the display’s control
panel to perform these steps.
• VIDEO6: HDMI
* For selection of the input terminal, see “SETTING THE INPUT TERMINALS” on P. E-24.
Note
• Functions may not be available with some models and some device options.
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
RGB INPUT MODE
Press
)
1
You can select RGB1.
• RGB1: mD-sub
* For selection of the input terminal, see
“SETTING THE INPUT TERMINALS” on
P. E-24.
RGB1 mode
* You can also use the button
on the display’s control
panel to perform these step
CONVENIENT FUNCTIONS
On-screen information
Press
3
The mode is indicated on the screen for 5 seconds.
.
Picture Mode
Press
4
.
This button can be used to switch the picture mode.
In the picture mode, you can switch between the set status and the fine mode.
* For the picture mode settings, see “Setting Picture Mode (P. E-17)”.
Picture Memory
Press
5
This button can be used to recall the settings of the picture memories 1 – 8. Each time this button is
pressed, the setting changes as follows.
.
* For the picture memory settings, see “Setting Picture Memory (P. E-17)”.
Note
• Functions may not be available with some models and some device options.
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
WATCHING PICTURES ON THE WIDE SCREEN
SWITCHING BETWEEN SCREEN SIZES
Press
ꢁ
.
1
2
The currently selected mode will appear.
Press
Size.
ꢁ
to select a desired Screen
Normal mode
Each time you press ꢁ, a different Screen Size
appears. The sequences used are as follows:
When you are in a Video input mode
When you are in an RGB input mode
* You can also use the buttons
on the display’s control
Wide1 mode
panel to perform these steps.
* Depending on the type of signal, some aspects
may not be selected.
Note
• When the WIDE mode is set to “Normal”, and pictures are shown for an extended time, a residual image or “burn-in” may be created. The burn-in
may occur at the boundary where the left and right borders of the picture meet the vertical bars. To reduce the chance of “burn-in” when watching in
• When a residual image was created, it is reduced by using the “White screen” settings. Note that there may also be cases when it can not be recovered
completely. (See P. E-26)
• A variety of Screen Sizes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame
height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same
aspect ratio.
• Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making
purposes or for a public audience may constitute a copyright infringement.
For films, try to select a mode having the same aspect ratio as the original picture; this enables the director’s original intentions to be preserved.
• See P. E-21 for how to adjust the picture size and position.
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
SCREEN SIZE
Normal (Video/RGB)
Displays pictures of normal size (i.e., a 4:3 aspect ratio).
Wide1 (Video)
Displays natural-looking pictures of standard size on the wide screen.
Picture of
Wide1
standard size
Wide2 (Video)/Wide (RGB)
Ideal for displaying vertically extended pictures such as squeezed pictures.
Vertically
extended picture
Wide2
Zoom1
Zoom2
Zoom1 (Video)/Zoom (RGB)
Enlarges horizontally extended pictures equally in all directions to maintain the aspect
ratio constant.
Horizontally
extended picture
Zoom2 (Video)
Reduces the height of horizontally extended pictures with captions, without eliminating
the caption. Only the height of pictures is reduced, not the height of the caption.
Horizontally extended
picture with caption
(Captions may not be easy to read, however, depending on the picture.)
ASPECT RATIO
The following aspect ratios are available.
4:3 aspect ratio
16:9 aspect ratio
4
16
(VHF/UHF broadcasting, BS broadcasting)
(HDTV broadcasting)
3
9
1.85:1 aspect ratio
(Vista Vision size)
2.35:1 aspect ratio
(Cinema Vision size)
1.85
2.35
1
1
Note
You may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or Cinema
Vision size i.e., the sizes used frequently for picture software.
• Functions may not be available with some models and some device options.
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
The numbers in parentheses ( ) indicate the reference page numbers.
PICTURE
(E-15)
Signal Contrast (E-16)
MENU
POSITION/SIZE (E-21)
Drive Contrast
Brightness
Color
(E-16)
(E-16)
(E-16)
(E-16)
(E-16)
Black Level
(E-18)
AUDIO
(E-22)
(E-23)
FEATURES
3D NR
(E-18)
(E-18)
FACTORY DEFAULT(E-27)
Tint
CODEC NR
Sharpness
Image Enhance (E-18)
User Color Temp (E-19)
Progressive Scan (E-20)
Chroma Transient (E-18)
Image Identify (E-18)
Ambient Sensor (E-16)
Picture Mode (E-17)
Precision Setting (E-17)
Picture Memory (E-17)
Default
24 Frame Mode (E-20)
30 Frame Mode (E-20)
Jaggies Filter
(E-20)
(E-20)
Position
Size
(E-21)
(E-21)
Default
Treble
(E-22)
(E-22)
(E-22)
(E-22)
Bass
Balance
Loudness
Adjustment
(E-23)
Dot Clock
(E-23)
(E-23)
On Screen Menu (E-23)
Clock Phase
Input Terminal
Others
(E-24)
(E-25)
Clamp Position (E-23)
Auto Calibration (E-23)
OSD
(E-23)
(E-23)
(E-24)
Language
Name Select
Video Input
S-video Input
D-SUB Input
(E-24)
(E-24)
(E-24)
Auto Off-NO SIG. (E-25)
Audio Input
(E-25)
(E-25)
(E-26)
(E-26)
(E-26)
(E-26)
(E-26)
Screen Orbiter
Direct Setting
Code Setting
White Screen
Background
Information
Note
• Some type of signal can not be selected.
E-14
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PROCEDURES OF ADJUSTMENT MENU
• Shown below is the basic procedure used to change the options on the ADJUSTMENT MENU. (Ex.: Adjusting tint setting (Tint))
Selecting the adjustment mode for adjustment or setting. (The items to be adjusted or set are stored for each adjustment mode.)
Press
;
The main menu screen will appear.
.
1
2
Press
E
or
F
to select “PICTURE”.
Each time you press
menus appears in the following sequence:
E
or F, one of the available
PICTURE < POSITION/SIZE < AUDIO < FEATURES
< FACTORY DEFAULT
“PICTURE” selected in the main
menu screen
The PICTURE Menu screen will appear.
Press
Press
C
or
D
to select “Tint”.
3
4
<
.
The “Tint” adjustment screen will appear.
“Tint” selected in the PICTURE
Menu screen
Press
E
or
F
to change tint values.
5
F: More greenish colors
E: More purplish colors
Press
Press
<
;
to store.
6
7
when you finish.
“Tint” adjustment screen
* Repeat steps 3, 4, 5 and 6 when you wish to make
changes to other options.
* Select “Default” and press “<”.
The PICTURE items are changed back to the default
settings available when the plasma display was
purchased.
* Press
;
to halt the operation in progress.
Note
• On-screen information disappears if you do not take any action for about 60 seconds.
• Functions may not be available with some models and some device options.
• The adjustment range varies with the display signal. You can adjust the display quality to the value you want within the adjustable range.
E-15
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE PICTURE
• Picture-related items can be set and adjusted in the Picture Adjustment Screen. See BASIC PROCEDURES OF ADJUSTMENT MENU
on page E-15 for the basic procedures.
Adjusting the Signal Contrast
Press
Press
Press
F
E
<
to increase the input signal contrast.
to reduce the input signal contrast.
to store.
Adjusting the Drive Contrast
Press
Press
Press
F
E
<
to raise the display’s luminance level, and increase the contrast.
to lower the display’s luminance level, and reduce the contrast.
to store.
* If Ambient Sensor is ON, the change made by this adjustment may be difficult to be recognized in too bright or dark a place.
Adjusting the Brightness
Press
Press
Press
F
E
<
to increase the brightness.
to reduce the brightness.
to store.
Adjusting the Color
Press
Press
Press
F
E
<
to darken the color.
to lighten the color.
to store.
Adjusting the Tint
Press
Press
Press
F
E
<
to change the tint to a more greenish color.
to change the tint to a more purplish color.
to store.
Adjusting the Sharpness
Press
Press
Press
F
E
<
to sharpen the Sharpness.
to soften the Sharpness.
to store.
Adjusting the Ambient Sensor
Ambient Sensor can be set.
Automatically adjusts the picture quality to an optimized level that matches the brightness of the ambient light.
Each time
E
or
F
is pressed, the setting is switched.
< On < Off <
Press
<
to store.
E-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Picture Mode
Each time you press
E
or
F
, the available choices appear in the following sequence.
< Natural < Fine < Effective < Conventional < Still <
Enables you to watch pictures with natural color tones and high picture clarity. This mode is suitable for watching movies or TV.
Natural
Fine
Best for watching movies in darkened rooms.
Best for watching TV in bright environments.
Effective
Conventional
Still
Displays a screen approximating that of a conventional TV screen.
Suitable for watching static images such as computer or still camera images.
Press
<
to store.
Precision Setting
Enables advanced picture quality adjustments.
See page E-18 for details.
Setting the Picture Memory
Eight groups of picture adjustment settings can be stored, enabling you to quickly switch to your
desired group of settings for watching picture.
Picture Memory Selection Screen
[Load]: Use
adjustment values stored in the selected Memory.
C
or
D
to select Memory 1 - 8. When
<
is pressed, the values becomes the picture
“Load” Selection Screen
[Save]: Use
values are stored to the selected Memory.
C
or
D
to select Memory 1 - 8. If
<
is pressed, the current picture adjustment
“Save” Selection Screen
Note
• If the operation is not executed for about 60 seconds, the menu disappears.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
E-17
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE PICTURE (Continued)
PRECISION SETTING
Even more advanced picture quality adjustments can be made as required.
Adjusting the Black Level
Press
Press
Press
F
E
<
to strengthen the reproduction of black. (Provides a picture quality with deep blacks.)
to weaken the reproduction of black.
to store.
Setting the Detail Gradation
Corrects the gradation of the light and dark areas of the picture.
Each time
< On < Off <
Press to store.
E
or
F
is pressed, the setting is switched.
Precision Setting Selection
Screen
<
Setting the 3D NR
This enables noise reduction processing with respect to the input signal noise level (reduces screen flicker for more comfortable viewing).
Each time you press
or F, the available choices appear in the following sequence.
< Off < Min. < Mid. < Max. <
Press to store.
E
<
Setting the CODEC NR
This enables noise reduction processing of mosquito noise or block noise generated when digital picture signals are recorded or replayed.
Each time you press
< Off < Min. < Mid. < Max. <
Press to store.
E
or F, the available choices appear in the following sequence.
<
Setting the Image Enhance
This performs detailed image quality settings.
• Chroma Transient
This function corrects the color contours.
Each time
< Off < On <
Press to store.
E
or
F
is pressed, the setting is switched.
<
• Image Identify (RGB)
This function discerns between the natural image display section and the text display section, and performs correction to enable an
optimized display for each.
Each time
E
or
F
is pressed, the setting is switched.
< Off < On <
Press
<
to store.
E-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Color Temp.
Use
sequence:
E
or
F
to specify a desired color temperature. Each time you press
E
or F, one of the available choices appears in the following
< -3500K < ... < Std. < ... < +3500K < User <
[-3500K]: More reddish colors
[+3500K]: More bluish colors
[User]:
Press
User Color Temp. setup
to store.
<
Setting the User Color Temp.
Use
C
or
D
to select Red, Green, or Blue, and adjust the color temp. for each.
Press F: to strengthen the selected color.
Press E: to weaken the selected color.
Press
<
to store.
Setting the Color Focus
This enables correction with respect to specific color hues within the image.
Independent correction of the hue of skin colors, blue skies, and so on, enables a more brilliant display.
• [Reddish Color]
With red at the center, performs the following corrections with respect to the range from magenta to
yellow.
[Tint]:
Use
E
E
E
E
E
and
and
and
and
and
F
F
F
F
F
to adjust the hue.
to adjust the color depth.
to adjust the strength of the red color range.
to adjust the strength of the green color range.
to adjust the strength of the blue color range.
[Color]: Use
[Red]: Use
[Green]: Use
[Blue]: Use
Color Focus (Reddish color)
Settings Screen
Press
<
to store.
Adjustments can be made in the same way for:
• [Greenish Color]:(With green at the center, performs corrections with respect to the range from yellow to cyan.)
• [Bluish Color]: (With blue at the center, performs corrections with respect to the range from cyan to magenta.)
• [Targeting Red]
This function corrects the hue and color depth with respect to Red.
[Tint]: Use
[Color]: Use
E
and
and
F
to adjust the hue.
to adjust the color depth.
E
F
Press
<
Adjustments can be made in the same way for:
to store.
• [Targeting Yellow]
(Performs correction with respect to Yellow.)
(Performs correction with respect to Green.)
(Performs correction with respect to Cyan.)
(Performs correction with respect to Blue.)
• [Targeting Green]
• [Targeting Cyan]
• [Targeting Blue]
• [Targeting Magenta] (Performs correction with respect to Magenta.)
Note
• If the operation is not executed for about 60 seconds, the menu disappears.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
E-19
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE PICTURE (Continued)
• [Targeting White]
Corrects red, green, and blue with respect to white.
[Red]: Use
[Green]: Use
[Blue]: Use
E
E
E
and
and
and
F
F
F
to adjust Red.
to adjust Green.
to adjust Blue.
Press
<
to store.
Making the Progressive Scan Settings
This sets the conversion processing of interlace signals to block receive signals.
• 24 Frame Mode
This function enables the optimized display of movies, etc. with 24 frames/second signals.
Each time
< Auto < Off <
Press to store.
E
or
F
is pressed, the setting is switched.
<
Progressive Scan Settings
Screen
• 30 Frame Mode
This function enables the optimized display of movies, etc. with 30 frames/second signals.
Each time
< Auto < Off <
Press to store.
E
or
F
is pressed, the setting is switched.
<
• Jaggies Filter
This function alleviates the phenomenon where jagged diagonal lines can be seen when interlace signals are input, thus enabling a
smoother motion picture display.
Each time
< Auto < Off <
Press to store.
E
or
F
is pressed, the setting is switched.
<
• Motion Setting
The detecting sensitivity for motion picture is set.
The response of the picture processing is valued in the motion picture priority setting.
Press F: to specify still picture priority.
Press E: to specify motion picture priority.
Press
<
to store.
Note
• If the operation is not executed for about 60 seconds, the menu disappears.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
E-20
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING SCREEN POSITION AND SIZE
• You can make changes to all screen adjustment options in the POSITION/SIZE Menu. See Page
E-15 for the basic procedures.
• The changes you make will be stored for the selected input mode. Therefore, you need to select a
desired input mode before making any changes.
POSITION/SIZE Menu screen
Adjusting Screen Position (Position)
Horizontal position (Horizontal)
F: Moves screen to the right.
E: Moves screen to the left.
Vertical position (Vertical)
“Position” adjustment screen
C: Moves screen up.
D: Moves screen down.
Press
<
to store.
Adjusting Screen Size (Size)
Screen width (Width)
F: Increases width.
E: Reduces width.
Screen height (Height)
“Size” adjustment screen
C: Increases height.
D: Reduces height.
Press
<
to store.
E-21
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING AUDIO
• You can make changes to all audio adjustment options in the AUDIO Menu. See Page E-15 for the basic procedures.
• The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any
changes.
Adjusting Treble (Treble)
Press EF to make adjustments.
F: Stronger treble
E: Weaker treble
Press
<
to store.
Adjusting Bass (Bass)
Press EF to make adjustments.
F: Stronger bass
AUDIO Menu screen
E: Weaker bass
Press
<
to store.
Adjusting Volume Balance (Balance)
Press EF to make adjustments.
F: Shifts the volume balance towards the right.
E: Shifts the volume balance towards the left.
Press
<
to store.
Setting Loudness (Loudness)
Corrects the balance between bass and treble for easy listening even with weak volume.
Each time you press
E
or F, one of the available choices appears in the following sequence:
< Off < On <
Press
<
to store.
Note
• If the operation is not executed for about 60 seconds, the menu disappears.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
• AUDIO menu will not be displayed when “No Audio” is selected. (See P. E-25.)
E-22
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER ADJUSTMENTS
FEATURES setup screen has the following 4 options.
See Page E-15 for the basic procedures.
[Adjustment]: Can make a fine adjustment of pictures such as Dot Clock, Clamp Position.
[On Screen Menu]: Can make a display setting such as OSD, Language. (See P. E-23.)
[Input Terminal]: Can make an input terminal setting such as Video Input. (See P. E-24.)
[Others]: Used to make Screen Orbiter and other settings. (See P. E-25–E-26.)
ADJUSTMENT
Dot Clock, Clock Phase, Clamp Position, and Auto Calibration are adjusted as shown in the following chart.
Select the item with CD , and then adjust with E F. Finally, press
<
to implement the adjustments.
Adjustment Item
Contents of Adjustments
Operation
Dot Clock
(mD-sub)
You may find the vertically-striped pattern in pictures,
depending on the clock frequency of your PC’s processor.
If you experience blurring, you can obtain a clearer picture by
adjusting the “Dot Clock”.
Use E F to adjust to minimize vertically-
striped pattern in pictures.
Clock Phase
(mD-sub)
Pictures and the outline of letters may blur or flicker as the
clock phase of your PC may be different. In this case, adjust the
clock phase manually. Normally, the automatic setting ensures
the optimal value.
When “Manual” is selected, use E F to adjust
to minimize pictures blur.
Clamp Position
(mD-sub, Comp.
video)
Adjusts the extremely dark or bright pictures. Normally, the
automatic setting ensures the optimal value.
Use E F to adjust pictures optimally.
Auto Calibration
(mD-sub)
Adjusts the dynamic range of images to the optimum.
Performed while a white screen signal is received.
Display the Auto Calibration<scre”.en.
Press
C
or
Select “ExecDute” and press “
to select “Yes”, and press “<”.
ON SCREEN MENU
Setting Display Information (OSD)
You can use this option to select from following display indication.
Each time you press
E
or F, one of the available choices appears in the following sequence:
< On (OSD:bright) < On (OSD:dark) <
[On (OSD:bright)]: On-screen information shown in light color.
[On (OSD:dark)]: On-screen information shown in dark color.
Press
<
* If the screen picture is too bright, some characters may be difficult to watch when
[On (OSD:dark)] is selected.
to store.
OSD selection screen
Selecting Language (Language)
You can use this option to select the language displayed on the screen.
(1) Select “Language” and press
The “Language” selection screen will appear.
(2) Press or to select your desired language.
English
<
.
C
D
Deutsch
Español
Français
Italiano
(German)
(Spanish)
(French)
(Italian)
“Language” selection screen
Nederlands (Dutch)
Ðóññêèé (Russian)
(3) Press
<
.
The menu is displayed in the selected language.
E-23
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER ADJUSTMENTS (Continued)
Selection of indications (Name Select)
You can change the settings for indications for video inputs and RGB inputs.
Video input
You can change the settings for indications for the VIDEO inputs.
Select the desired indication in accordance with the connected equipment.
Each time E F is pressed, the setting is switched. (In the case of VIDEO1)
< Video1 < DVD1 < DVD2 < VCR1 < VCR2 < GAME < Camcorder < STB < Satellite < Cable TV <
Press
<
to store.
RGB input
You can change the settings for indications for the RGB inputs.
Select the desired indication in accordance with the connected equipment.
Each time E F is pressed, the setting is switched. (In the case of RGB 1)
< RBG1 < PC1 < PC2 < DVD1 < DVD2 < STB < Satellite < Cable TV <
Press
<
to store.
SETTING THE INPUT TERMINALS
Selecting the settings of Video/S-video Input terminal
You can use this option to select the color format appropriate for the input signal.
Each time you press
E
or F, one of the available modes appears in the following sequence:
< Auto1 < Auto2 < NTSC < PAL < SECAM < PAL60 < N-PAL < M-PAL <
4.43NTSC <
[Auto1]:
[Auto2]:
Automatically selects NTSC, PAL and SECAM.
Automatically selects NTSC and M-PAL.
[Other than Auto]: You need to select a system appropriate to the input signal.
Press to store.
Input Terminal Settings Screen
<
Selecting the settings of D-SUB Input terminal
You can use this option to select the signal system it will receive to D-SUB Input terminal.
(1) Select D-SUB Input and press
D-SUB Input screen appears.
<
.
(2) Select the signal system to receive.
Each time you press
or F, one of the available choices appears in the following sequence:
E
< RGB-PC < Decoder <
[RGB-PC]: For using RGB of PC
[Decoder]: For using digital broadcast tuner
(3) Press
<
to store.
Note
• If the operation is not executed for about 60 seconds, the menu disappears.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
E-24
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER SETTINGS
Auto Off-NO SIG.
You can make to the standby state automatically when the no signal state continued during set up time.
Press C D to select the “Time”.
Press E F to select the amount of time before the standby state starts.
< Off < 1 min. < 15 min. < 45 min. < 60 min. <ꢀ
Press
<
* The numerical value is the approximate amount of time before the standby state starts.
to store.
You can assign the black or white color for the background color at the no signal state.
Press C Dto select the “Background”.
“Auto Off-NO SIG.” selection
screen
Press E F to select the displayed background displayed.
< Black < White <
Press
<
* The background color changes to assigned color state after approximate 20 seconds at the no signal state.
to store.
Selecting input terminals (Audio Input)
You can use this option to select the available terminals to receive the audio from input equipment.
(1) Select “Audio Input” and press
The “Audio Input” selection screen will appear.
(2) Press or to select video input terminal.
(3) Select a related audio input terminal.
Each time you press
or F, one of the available choices appears in the following sequence:
<
.
C
D
E
< No Audio < Audio 1 < Audio 2 < • • • • • <ꢀ
[No Audio]: No audio in the corresponding mode.
[Audio 1-3]: Selects Audio 1 through 3 for receiving audio in the corresponding mode.
[Audio 4-5]: HDMI
“Audio Input” setting screen
* There is also “Audio Input” that cannot be selected.
* Repeat steps (2) and (3) for each piece of input equipment.
(4) Press
<
* AUDIO menu will not be displayed when “No Audio” is selected.
to store.
Minimizing phosphor burn-in (Screen Orbiter)
for RGB
You can use this option to move the screen position to minimize phosphor-induced “burn-in”.
Follow the steps below.
(1) Select “Screen Orbiter” and press
The “Screen Orbiter” setting screen will appear.
(2) Press or to select “Mode/Time”.
(3) Select a desired pattern.
Each time you press
< Off < Time < Mode <
<
.
C
D
E
or F, one of the available choices appears in the following sequence:
“Screen Orbiter” setting screen
[Off]:
Disables Screen Orbiter.
[Time]: Moves the pattern approximately every one hour.
[Mode]: Moves the pattern when the power is turned ON or when you switch between modes.
E-25
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER ADJUSTMENTS (Continued)
(4) Press
(5) Press
C
E
or
D
to select “Moving Area”.
or
F
to select the range for moving the pattern.
Each time you press
E
or F, one of the available choices appears in the following sequence:
< Min. <ꢀStd. < Max. <
[Min.]: Pattern moves in small range. (About 5 pixels)
[Std.]: Pattern moves in moderate range. (About 10 pixels)
[Max.]: Pattern moves in wide range. (About 15 pixels)
(6) Press
<
When the Screen Orbiter function is operated, some screen contents at the top, bottom, right or left of the screen may move offscreen.
to store.
*
Setting RGB Input Signal Compulsorily (Direct Setting)
for RGB
You can use this option to switch the setting for RGB input signal.
Each time you press
< Auto < VGA < WVGA < 480P < XGA < WXGA < SXGA < SXGA+ <
[Auto]: The optimum display is obtained automatically for input signals.
[Others]: The optimum resolution setting is fixed for each signal.
Press to store.
E
or F, one of the available choices appears in the following sequence:
<
* In Auto mode, the resolution of VGA, WVGA, 480P, XGA, WXGA, SXGA and SXGA+ may not be automatically distinguished.
Switch to the fixed display when the image is not displayed properly.
* Signals that are not applicable depending on the model or input terminals may not be displayed.
Specifying RGB Input Signal (Code Setting)
for RGB
Normally, use this option in Auto mode.
Displaying white over entire screen (White Screen)
You can use this option to display white over the entire screen to minimize phosphor burn-in.
Each time you press
< Off < On <
Press to store.
E
or F, one of the available choices appears in the following sequence:
<
Minimizing phosphor burn-in (Background)
When the screen size was set to “Normal”, to reduce “burn-in”, the brightness of the part at which left and right images are not displayed
can be set. Normally, we recommend that “Light Gray” be used.
Each time you press
< Black < Dark Gray < Light Gray <
Press to store.
E
or F, the settings is switched.
<
*Burn-in can still occur if the Normal mode is shown for extended periods.
Displaying System Status (Information)
Displays system operation status.
Select “Information” and press
<
The “Information” screen will appear.
.
[Mode]:
Input mode appears at the upper right corner of the screen
[Freq. Scan Mode]: Frequency scanning
[Input Signal]:
[Input Sync]:
[Freq.]:
Video mode
Signal type
Synchronized signal frequency, polarity
RGB code number
Information screen
(Video Mode)
[Preset No.]:
Note
• If the operation is not executed for about 60 seconds, the menu disappears.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
E-26
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIALIZATION OF USER ADJUSTMENT VALUE
You can restore the values of the adjustment/setting made in the MENU to factory settings.
Press
;
The main menu screen will appear.
.
1
2
Press
E
or
F
to select “FACTORY
DEFAULT”.
Each time you press
menus appears in the following sequence:
E
or F, one of the available
“FACTORY DEFAULT” selected
in the main menu screen
PICTURE < POSITION/SIZE < AUDIO < FEATURES
< FACTORY DEFAULT
The FACTORY DEFAULT Menu screen will appear.
Press
<
.
3
4
• Displays the message of whether to proceed with the
initialization.
Press
C
or
D
to select the Yes.
Displays the message of
whether to proceed the
initialization
Press
<
.
5
6
• The message of having completed the initialization
will be displayed after initializing.
Press
;
when you finish.
Displays the message of having
completed the initialization
E-27
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTIONS
Wall-mounting Bracket
0° to 15° mounting angle
P-WB4201 (for 42” model/50” model)
P-CT4200 (for 42” model/50” model)
P-TT4202 (for 42” model/50” model)
Ceiling unit
5° to 25° mounting angle
Desktop Stand unit
Speaker
(1 set of 2 speakers)
P-SP1000 (for attaching to the display) for
42” model/50” model
P-SP4200 (for mounting on the speaker
stands) for 42” model
P-SP5010 (for mounting on the speaker
stands) for 50” model
Desktop Speaker Stand
(1 set of 2 speaker stands)
P-ST4200 (for P-SP4200)
P-ST5000 (for P-SP5010)
* When installing an option, make sure that all installation requirements for that option (as given in the relevant instruction manual) are met.
* The colors of options do not match the display colors perfectly.
* To improve the function and performance of optional accessories, specifications and part names may change. Consult your local dealer
before purchasing.
Warning
To prevent injury, fire, and electric shock, arrange for options to be initially installed (or installed at a different location) by your dealer.
CAUTION
This display (P42XHA58/P50XHA58) is for use only with Fujitsu General Limited’s option (P-WB4201, P-CT4200, P-TT4202).
Using this display with other option can cause instability resulting in possible injury.
E-28
Download from Www.Somanuals.com. All Manuals Search And Download.
MAIN SUPPORTED SIGNALS
The plasma display can store up to four types of signals for RGB adjustment values. The plasma display uses the first-in, first-out method;
therefore, the first input signal is cleared when the fifth one is input.
Input the signal you want to store and adjust to a desired screen according to “ADJUSTING SCREEN POSITION AND SIZE”.
When the adjustment has been made, it is automatically stored. Thus, when the plasma display receives the same signal later, pictures will
be displayed in accordance with the adjustment value most recently stored.
Main corresponding signals (RGB mode)
Display (dots x lines)
640 x 480
Horizontal frequency (kHz)
Vertical frequency (Hz)
59.94
Signal
31.47
37.50
43.27
31.47
37.88
46.88
53.67
48.36
60.02
68.68
63.98
79.98
31.02
31.72
47.71
15.73
15.63
VGA
640 x 480
640 x 480
720 x 400
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
848 x 480
852 x 480
1360 x 768
720 x 485
720 x 575
75.00
85.01
70.09
60.32
75.00
85.06
60.00
75.03
84.99
60.02
75.03
60.00
59.97
60.01
59.94
50.00
VGA 75 Hz
VGA 85 Hz
400 lines
SVGA 60 Hz
SVGA 75 Hz
SVGA 85 Hz
XGA 60 Hz
XGA 75 Hz
XGA 85 Hz
SXGA 60 Hz
SXGA 75 Hz
60 fields
50 fields
* With some input signals, “Out of range” may appear even when the horizontal and vertical frequencies are within their permissible
ranges. In this event, match the input signals to another frequency rather than those listed above.
In the Comp.video and Video/S-video, the display has been factory-set as follows for different input signals:
Main corresponding signals (Comp.video, HDMI mode)
Main corresponding signals (Video, S-video mode)
Horizontal
Vertical
Horizontal
Vertical
Signal
HDMI
Signal
NTSC
frequency (kHz)
frequency (Hz)
frequency (kHz)
frequency (Hz)
15.73
15.63
31.47
31.25
45.00
37.50
33.75
28.13
59.94
SDTV 480i
SDTV 576i
SDTV 480p
SDTV 576p
HDTV 720p
HDTV 720p
HDTV 1080i
HDTV 1080i
15.73
15.63
15.63
15.63
15.63
15.73
15.73
59.94
50.00
59.94
50.00
60.00
50.00
60.00
50.00
50.00
50.00
59.52
50.00
59.95
59.94
PAL
SECAM
PAL60
N-PAL
M-PAL
4.43NTSC
Note
• Depending on the input signal, the display may show pictures of reduced size due to size reduction and interpolation.
• You can check input signals through Information on the FEATURES Menu screen. (See P. E-26.)
“
”
• In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items.
• All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.
E-29
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
WIDE PLASMA DISPLAY
Series Name
P42XHA58E
P50XHA58E
Model
Product Name
P42XHA58EBb
P50XHA58EBb
Screen size
42” wide screen:
50” wide screen:
92.2 cm (W) x 52.2 cm (H) (106.0 cm diagonal) 110.6 cm (W) x 62.2 cm (H) (126.9 cm
36.3 inch (W) x 20.6 inch (H) (41.7 inch
diagonal)
diagonal)
43.5 inch (W) x 24.5 inch (H) (50 inch
diagonal)
Aspect ratio
16:9 (wide)
Number of pixels
Weight
1024 (H) x 768 (V)
30 kg / 66.1 lbs
1366 (H) x 768 (V)
41 kg / 90.4 lbs
Outer dimensions
103.9 (W) x 64.0 (H) x 8.7 (D) cm
40.9 (W) x 25.2 (H) x 3.4 (D) inch
(does not include outer projections)
121.6 (W) x 72.6 (H) x 10.0 (D) cm
47.9 (W) x 28.6 (H) x 3.9 (D) inch
(does not include outer projections)
Power supply
Current rating
110-240 VAC 50/60 Hz
4.2-1.5 A
5.1-2.0 A
External equipment terminals
Video input terminals
VIDEO1 INPUT (Video input)
VIDEO2 INPUT (S-video input)
RCA terminal
1 Vp-p/75 Ω
S terminal
Y:
C:
1 Vp-p/75 Ω
0.286 Vp-p/75 Ω
1 Vp-p/75 Ω
VIDEO3/VIDEO4 INPUT
(Component video input)
3 RCA terminals
Y:
P
B/CB: 0.7 Vp-p/75 Ω
R/CR: 0.7 Vp-p/75 Ω
P
VIDEO5/VIDEO6 INPUT
(HDMI input, Video/Audio)
HDMI terminal (HDMI type A connector)
PC input terminal
Audio terminals
RGB1 input
mD-sub, 3 rows, 15-pin
Picture signal:
0.7 Vp-p/75 Ω
Synchronization signal: TTL level
2 audio input pin jacks (L/R) (3 lines)
500 mVrms/at least 22 kΩ
Control terminal
RS-232C connector (D-sub 9-pin)
Max. output: 10 W + 10 W, 6 Ω
Temperature: 0 to 40 °C / 32 to 104 °F
External speaker output terminal
Operating conditions
Humidity:
20 to 80 %
Accessories
User’s manual, Safety Precautions, Remote control, AA battery (2), Power cord,
Small ferrite core (2), Large ferrite core (2)
Regulation
• CE Safety: EN60065
EMC: EN55022 (CISPR22)
EN55024 (CISPR24)
EN61000-3-2
EN61000-3-3
E-30
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANING AND MAINTENANCE
Precautions
Be sure to remove the power plug from the receptacle before cleaning the display.
Be sure not to clean the display using a cloth dampened with volatile solvents, such as benzene or thinner. Such solvents can harm the
display’s cabinet, the filter at the screen front, and the remote control. They can also cause paint to come off these sections.
Cleaning the Screen
Clean the screen gently with a soft cloth.
The screen surface is fragile. Never attempt to clean it with a hard material, press on it forcefully, or tap it.
Cleaning the Cabinet and Remote Control
Use a soft cloth for cleaning.
If the cabinet or remote control is heavily stained, soak a soft cloth in a mixture of water and detergent and squeeze it dry before wiping off the
stains. Use a soft, dry cloth for final cleaning.
Cleaning the ventilation grille
Remove dust from the ventilation grille in the rear of the main unit periodically with a vacuum cleaner as the accumulated dust can increase
the internal temperature of the main unit causing machine failure or fire hazard.
BEFORE OBTAINING SERVICE
In the event of problems with the display, check the following explanations before contacting your dealer for servicing.
Problem
• Power does not turn ON.
• No pictures are displayed.
Action
• Check whether the power plug is securely inserted into the receptacle.
• Check cables for disconnection.
• Check whether the power for all input equipment is ON.
• Check for connection to wrong terminals or for wrong input mode.
• Check whether the input mode display is colored pink. Special setup may have been
made. Return to original setup or initialize the User adjustment value.
• Remote control does not function prop-
erly.
• Check for incorrect battery orientation.
• Check for dead batteries.
• Check for distance from the display.
• Check whether you are pointing the remote control transmitter properly at the display’s
receiver.
• The display makes a snapping sound.
• The display makes a buzzing sound.
• This sound is produced when the cabinet expands or contracts due to variations in temper-
ature. This sound does not indicate that the display has a problem.
• The display has fans to maintain the temperature of internal components at a constant
level. This sound is produced by the fan as it rotates. (Applies to models equipped with a
fan)
• There are spots on the screen.
• Degraded colors/tints
• Improper screen position/size
• No audio
• Check whether your AV equipment is affected by interference from automobiles, trains,
• Check whether all picture adjustments have been properly made.
(See “Adjusting the Picture” on P. E-16–E-17.)
• Check whether screen position and size have been properly adjusted.
(See “Adjusting Screen Position and Size” on P. E-21.)
• Check cables for disconnection.
• Check whether the proper audio input has been selected.
(See “Audio Input” on P. E-25.)
• If “Out of range” appears, the display is
receiving a signal whose picture or signal
cannot be reproduced by the display.
• The screen turns to black and white.
• Signals that are not supported by this display have been input. Check which signals are
supported. (See “MAIN SUPPORTED SIGNALS” on P. E-29.)
• If “Error message Condition 1” appears,
the fan is defective.
• Remove the power plug from the receptacle, and contact your dealer for repairs.
(Applies to models equipped with a fan)
• If “Error message Condition 2” appears,
the display’s internal components are
extremely hot.
• Remove the power plug from the receptacle. (You can turn the power back ON again
when the components have cooled sufficiently.) If the message appears again when you
turn the power back on, remove the power plug from the receptacle, and contact your
dealer for a repairs.
• If “Change refresh rate to 60Hz” appears.
• The picture may get blurred with vertical frequency of other than 48.3-51.8 or 58.4-61.4
(Hz). Change the setting of your PC, etc.
• If the power indicator lamp flashes red or
green.
• Remove the power plug from the receptacle, and inform your dealer about how the lamp
flashed.
The power indicator lamp flashes differently depending on the type of problem.
Note
• Functions may not be available with some models and some device options.
E-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|