USER’S MANUAL
42”/50” WIDE PLASMA DISPLAY
P42VCA10/P42HCA10/P50XCA10/
P42VCA11/P42HCA11/P50XCA11/
P42VCA12/P42HCA12/P50XCA12
WITH OPTIONAL VIDEOBOARD (P-TE1020E)
Contents
Page
Page
Before Use
Adjustments
• Safety Precautions ··································· E-2–E-3
• Features ····························································E-4
• Accessories ······················································ E-5
• Handy Tips ······················································· E-5
• Installation ······················································· E-6
• Adjusting Pictures (PICTURE Menu)··· E-20–E-21
• Adjusting Screen Position and Size
(POSITION/SIZE Menu) ························ E-22–E-23
• Adjusting Audio (AUDIO Menu) ········· E-24–E-25
•
Other Adjustments (FEATURES Menu)··· E-26–E-33
Usage
• Initialization of User Adjustment Value
• Part Names and Functions ····················· E-7–E-11
• Using the Remote Control ·····························E-12
• Connecting the Display to External
Equipment ············································ E-13–E-15
• Basic Operations ············································E-16
• Selecting Input Mode·····································E-17
(FACTORY DEFAULT) ·····································E-34
Others
• Options·················································· E-35–E-36
• Factory Settings ············································ E-37
• Specification ········································· E-38–E-40
• Cleaning and Maintenance····························E-41
•
Watching Pictures on the Wide Screen ··· E-18–E-19
Before using the display, read this manual carefully so that you know how to use the display correctly.
Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the
safety precautions.
Keep this manual where the user can see it easily.
* Installation and removal require special expertise. Consult your product dealer for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, dose not operate normally, or has been dropped.
–
–
–
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Do not use attachments not recommended by the product manufacturer as they may cause hazards.
Do not use immediately after moving from a low temperature to high temperature, as this causes condensation, which may result in fire,
electric shock, or other hazards.
–
–
–
The apparatus shall not be exposed to dripping or splashing.
No objects filled with liquids, such as vases, shall be placed on the apparatus.
Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, and serious
damage to the product. The product should be mounted according to the manufacturer’s instructions, and should use a mount
recommended by the manufacturer.
–
–
When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven surfaces which may cause the
product and cart to overturn, damaging equipment or causing possible injury to the operator.
Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and protect it from
overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the product on bed,
sofa, rug, or other similar surface. It should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided and the manufacturer’s instructions have been adhered to.)
For proper ventilation, separate the product from other equipment, which may prevent ventilation, and keep distance more than 10 cm.
–
–
–
–
–
–
–
–
This product should be operated only from the type of power source indicated on the label. If you are not sure of the type of power
supply of your home, consult your product dealer or local power company.
This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you are unable to insert the plug
into the outlet, contact your electrician to install the proper outlet. Do not defeat the safety purpose of the grounded plug.
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay
particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product.
For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the cable system. This will prevent damage to the product due to lightning and power line surges.
Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric
shock.
Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that
could result in a fire or electric shock. Never spill liquid of any kind on the product.
Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages and other hazards.
Refer all service to qualified service personnel.
Unplug this product from the wall outlet and refer service to qualified service personnel if the product does not operate normally by following
the operating instructions. Adjust only those controls that are covered by the Operation Manual, as an improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
–
–
–
–
–
–
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or with
same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the
product is in proper operating condition.
The product should be placed more than one foot away from heat sources such as radiators, heat registers, stoves, and other products
(including amplifiers) that produce heat.
When connecting other products such as VCR’s, and personal computers, you should turn off the power of this product for protection
against electric shock.
Do not place combustibles behind the cooling fan. For example, cloth, paper, matches, aerosol cans or gas lighters that present special
hazards when overheated.
Use only the accessory cord designed for this product to prevent shock.
The power supply voltage rating of this product is AC110–240 V (42”) and AC220–240 V (50”W, 50”E, 50”A type) and AC 120 V (50”U
type), and the power cord attached conforms to the following power supply voltage. Use only the power cord designated by our dealer to
ensure Safety and EMC.
When it is used with other power supply voltage, the power cable must be changed.
Power cord
Use the standard power plug and cord set of the specified country.
Consult your product dealer.
Power supply voltage:
AC 100–125 V
(42”W, 50”U Type: Included)
AC 200–240 V
AC 240 V (SAA TYPE)
(42”E, 50”W, 50”E Type: (42”A, 50”A Type: Included)
Included)
E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
This display uses a plasma display panel and is only 8.5 cm (42”) /9.8 cm (50”) deep. With its high picture quality and performance, it is
perfectly suited for multimedia applications.
Variety of input signals
• RGB input is compatible with mD-sub terminals and BNC terminals.
• The display has an RGB input terminal to receive signals, including VGA, SVGA, XGA,SXGA and UXGA.
5 screen sizes (Video input mode) and 3 screen sizes (RGB input mode)
• This display offers a total of five different screen sizes in video input mode: Wide1, Wide2, Zoom1, and Zoom2.
A Normal mode is also available for displaying of normal-size (4:3 aspect ratio) pictures.
• Three different screen sizes in RGB input mode (Normal, Wide, and Zoom) are also available.
Vertical installation
• The display can be installed vertically, enabling advertisement to be displayed. In this case, you can set up the display so that on-screen
information, such as input modes and menus, is displayed properly.
Power management function
• The display features a DPMS (Display Power Management Signaling) function that ensures automatic power saving capability.
Flexible as part of a system
• You can operate the display by remote control using the RS-232C interface.
• If you have two or more displays, you can assign a unique number to each of them so that you can select which one you want to use.
• Input Priority function for selecting automatic switching to desired mode is provided to avoid troublesome operation.
Others
• The white screen and screen orbiter functions are available to minimize phosphor burn-in.
E-4
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSORIES
CHECKING ACCESSORIES
One user’s manual One power cable
Two big ferrite
cores
Two small ferrite
cores
One remote control Two AA batteries
Manual
(42”W, 50”U Type)
(P42VCA11/
P42HCA11/
P50XCA11 only)
(42”E, 50”W, 50”E Type)
(42”A, 50”A Type)
HANDY TIPS
• Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.5 m or 5 feet (42”)/
1.9 m or 6.3 feet (50”)) from the screen and to look occasionally away while working.
• Have the display inspected and cleaned by your dealer at regular intervals.
• Pictures may become “burnt” into the screen phosphors if the screen is left on for extended periods. To ensure that the display has a
prolonged service life, be sure to use a screen orbiter, white screen. This will ensure the same picture or pattern is not constantly
displayed for long periods. (See P. E-31–E-32.)
• The plasma display panel, which is built for maximum precision, provides more than 99.99% effective pixels. You may find, however,
that some pixels constantly remain lit or dimmed.
• The display has a fan to prevent its internal temperature from rising.
• Be careful with the air delivered by the fan. It may be very hot.
• Contact your dealer if you find that the display does not seem to function properly when used with other audio-visual equipment.
You may need to move your display if it produces degraded pictures or noise due to electromagnetic radiation, or if the infrared remote
control does not function properly.
• Pictures may not be displayed properly if you connect a non-standard PC to the RGB input terminal. In this case, contact your dealer
for more information.
• The protective circuit, built into the display, automatically turns off the power if the display has a problem. In this case, you will see
that the power indicator lamp flashes red.
Warning
If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the
power plug from the receptacle to prevent fire or electric shock. Then, check the display in accordance with the instructions given on
P. E-41, or contact your dealer.
Information
Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products.
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location.
Be sure to use the optional desktop stand, ceiling-mounting unit, wall-mounting unit and other unit when installing this display. Also, be
sure that your dealer performs the installation.
See the appropriate instruction manual for more information on the installation hardware you select.
To ensure proper heat radiation, provide at least as much space around the display as shown below.
* Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C.
* Never attempt to tilt the display sideways or backward.
* To prevent the power and other cables from being accidentally pulled, be sure to make the wiring work along the wall or through the
corners of floor.
* To prevent an accident and ensure safety in the event of an earthquake, fix the display securely into position as described below.
Horizontal type
Front
Side
(cm)
(cm)
Upper
10
10
10
Left
Right
Wall
5
Lower
4
Note
The display is a highly precise piece of equipment and therefore must be packed properly before transportation. Be sure to use only those packing
materials originally supplied with the display when repacking it.
Reference
See P.E-35 for more information on options.
E-6
Download from Www.Somanuals.com. All Manuals Search And Download.
PART NAMES AND FUNCTIONS
Front (both 42" and 50")
1 Power indicator lamp
This lamp shows the state of the power supply.
Lit (red):
Power OFF (stand-by)
Power ON
Lit (green):
Lit (orange): Power saving (DPMS: Power saving
function) mode ON
Flashing (red): Malfunction (Flashes differently depending
on the type of malfunction. See P. E-41 for
more information.)
①�
②�
2 Remote control signal receiver
Receives signals from the remote control.
Warning
If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the
power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
PART NAMES AND FUNCTIONS (Continued)
Bottom (42” VCA type)
Bottom (42” HCA type)
Bottom (50”)
1 OFF/STD-BY switch
OFF
STD-BY :The power indicator lamp lights red, and the power can be turned on or off by the power button.
2 RS-232C terminal (RS-232C)
:The power indicator lamp goes off, and the power can’t be turned on by the power button. The power is partly supplied.
This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.
When connecting a cable, attach a ferrite core to the cable. (See P. E-13.)
3 RGB1 input terminal (RGB1 INPUT/mD-sub)
Connect this terminal to the PC’s display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.
4 Power input terminal
Connect this terminal to the power cable supplied with the display.
When connecting a cable,attach a ferrite core to the cable. (See P. E-13)
5 External speaker output terminal (EXT SP)
Connect this terminal to the optionally available speaker.
(When using other speaker than the optional one, use 4–16 Ω speaker.)
When connecting a cable,attach a ferrite core to the cable. (See P. E-13)
* See the speaker instruction manual for more information.
* P42VCA11/P42HCA11/P50XCA11 only.
E-8
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Sound 1 input terminal (AUDIO1 INPUT)
7 Sound 2 input terminal (AUDIO2 INPUT)
8 Sound 3 input terminal (AUDIO3 INPUT)
Connect this terminal to the sound output terminal of your VCR, etc. (See P.E-30 for the selection of audio input for video input.)
* This terminal is not available for P42VCA10/P42HCA10/P50XCA10.
9 RGB2 input terminal (RGB2 INPUT/BNC)
Connect this terminal to the PC’s display (analog RGB) output terminal.
0 RGB2 synchronization switch (SYNC SW TTL/ANALOG (75 Ω))
This switch is used to terminate horizontal (H) terminal and vertical (V) terminal, out of RGB2 input terminals, with 75 Ω .
TTL
: Does not terminate.
ANALOG (75 Ω): Terminates.
A Video input terminal (VIDEO INPUT)
Connect this terminal to the video output terminal of your VCR.
B S-Video input terminal (S-VIDEO INPUT)
Connect this terminal to the S-video output terminal of your VCR.
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
PART NAMES AND FUNCTIONS (Continued)
Description of Input Terminals
RGB1 terminal (RGB1 INPUT/mD-sub)
Pin No. Input signal Pin No.
Input signal
1
2
3
4
5
6
7
8
Red
9
—
Green
Blue
10
Ground
11
—
—
—
12
Ground
Ground
Ground
Ground
13
Horizontal synchronization
14
Vertical synchronization
15
—
Frame
Ground
RS-232C terminal (RS-232C)
Pin No.
Signal
1
2
3
4
5
6
7
8
9
DCD (Data Carrier Detect)
RD (Received Data)
TD (Transmit Data)
DTR (Data Terminal ready)
GND (Ground)
DSR (Data Set Ready)
RTS (Request To send)
CTS (Clear To Send)
RI (Ring Indication)
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
1 Power ON button [POWER ON]
➝ (See P. E-16.)
2 Power OFF button [POWER OFF]
➝ (See P. E-16.)
1
3
2
3 RGB input mode selector button [RGB]
4 Video input mode selector button [VIDEO]
5 Wide screen selector button [WIDE]
6 Menu button [MENU]
➝ (See P. E-17.)
5
4
➝ (See P. E-17.)
➝ (See P. E-18–E-19.)
➝ (See P. E-20–E-34.)
6
7
8
Use this button to display a desired menu for adjusting the picture.
7 Volume adjustment buttons [VOL +/-]
➝ (See P. E-16.)
9
Adjust the volume.
Press the + button to increase the volume.
Press the - button to reduce the volume.
* Not used with P42VCA10/P42HCA10/P50XCA10.
8 Adjustment buttons [
/
/
/
]
➝ (See P. E-20–E-34.)
=
Use these buttons to scroll through options in a menu and change values.
9 Enter button [ENTER]
➝ (See P. E-20–E-34.)
Press this button to finalize the selection of a desired menu or option within a menu.
0 Display selector buttons [SHIFT 1–4]
➝ (See P. E-32.)
When you use two or more displays, you can use these buttons to control up to four displays
by assigning a unique number to each display.
PUTTING BATTERIES IN THE REMOTE CONTROL
1 To remove the cover, slide it
2 Place two AA batteries in the
remote control. Make sure that the
batteries are properly oriented.
3 Close the cover until it snaps into
outwards while pressing it down.
place.
CAUTION: Be sure to use replacement batteries of the same type as the original ones.
When disposing of used batteries, please comply with governmental regulations or environmental
public institution’s rules that apply in your country/area.
Note
The remote control will not function properly if the batteries are dead. Be sure to replace them as needed.
Do not use rechargeable batteries (Ni-Cd).
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE REMOTE CONTROL
PRECAUTIONS
To prevent malfunction, be sure not to apply any form of severe shock to the remote control.
To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or
heating equipment.
Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner.
EFFECTIVE RANGE FOR THE REMOTE CONTROL
Point the remote control at the display’s signal receiver when using it.
Make sure that there are no obstacles between the remote control and the display’s signal receiver.
Upper
20°
20°
Lower
30°
5 m (Front)
30°
Left
Right
Information
The remote control may not function properly if you use a high-frequency fluorescent lamp. If you experience problems, move the lamp or use the
remote control from a different position.
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT
Be sure to turn OFF the power to the display and external equipment before making any connections.
No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC
model. Contact your dealer for more information.
RECEPTACLE
Make sure that the power cable’s grounding wire is grounded.
The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you
will need to have it replaced. Contact your dealer for more information.
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT
Carefully check the terminals for position and type before making any connections.
Loose connectors can result in picture or color problems. Make sure that all connectors are securely inserted into their terminals.
Ferrite cores
These ferrite cores are used to attenuate undesired signals.
Two big ferrite cores
When connecting a cable to the power input terminal, RS-232C terminal, attach one of these ferrite cores to the cable near the terminal.
Power Cable
Ferrite Core
RS-232C Cable
Ferrite Core
Two small ferrite cores
When connecting a cable to the external speaker output terminal attach one of these ferrite cores to the cable near the terminal.
Ferrite Core
Ferrite Core
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)
EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS
Speaker
Speaker (optional)
Display
Remote
control
VCR or other external
components See P.
VCR
PC
VCR
• Connect the video signal cable to either the S-video input terminal or the video input terminal.
To audio
output
To video output
To S-video output
To audio input
To S-video input
To video input
Bottom of Display (Ex.: P42VCA11 series)
E-14
Download from Www.Somanuals.com. All Manuals Search And Download.
PC
• As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase.
To RGB output (mD-sub)
To audio output
To audio
input
To RGB1 input
(mD-sub)
Bottom of Display (Ex.: P42VCA11 series)
Note
• Unplug the power cord from the AC outlet before you connect external components.
• Also refer to the instructions for the component to be connected.
* When inputting voice see “Selecting input terminals (page E-30)”
* The sound terminal is not available for P42VCA10/P42HCA10/P50XCA10.
E-15
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
TURNING ON THE POWER
Press
on the remote
1
2
control.
When you do so, the power indicator lamp turns
green.
Press
desired input mode.
or
to select a
TURNING OFF THE POWER
Press
when the power is ON.
The power indicator lamp turns red.
ADJUSTING THE VOLUME
Press
Press
to increase the volume.
to reduce the volume.
Any value between 0 and 40 can be selected.
* “No Audio” appears if you press or after you have
selected “No Audio” for “Audio Input”. (See P. E-30.)
When the volume adjustment button is pressed
* Note that the volume level remains stored even when you
turn OFF the power.
* Not used with P42VCA10/P42HCA10/P50XCA10.
E-16
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING INPUT MODE
VIDEO INPUT MODE
Press
to select a desired input
1
mode.
Each time you press , a different input mode
appears. The sequence is as follows:
Video:
Displays pictures from equipment
connected to the Video terminal.
S-video mode
S-video:
Displays pictures from equipment
connected to the S-video terminal.
RGB INPUT MODE
Press
to select a desired
1
input mode.
Each time you press
appears. The sequence is as follows:
, a different input mode
RGB1:Displays pictures from equipment
connected to the RGB1 (mD-sub) terminal.
RGB1 mode
RGB2:Displays pictures from equipment
connected to the RGB2 (BNC x 5)
terminal.
RGB2 mode
E-17
Download from Www.Somanuals.com. All Manuals Search And Download.
WATCHING PICTURES ON THE WIDE SCREEN
SWITCHING BETWEEN SCREEN SIZES
Press
.
1
2
The currently selected mode will appear.
Press
picture mode.
to select a desired
Normal mode
Each time you press , a different picture mode
appears. The sequences used are as follows:
When you are in a Video or S-video input mode
When you are in an RGB input mode
Wide1 mode
* Depending on the type of signal, some aspects
may not be selected.
Note
• Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in.
• A variety of picture modes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame
height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same
aspect ratio.
• Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making
purposes or for a public audience may constitute a copyright infringement.
For films, try to select a mode having the same aspect ratio as the original picture; this enables the director’s original intentions to be preserved.
Reference
See P. E-22–E-23 for how to adjust the picture size and position.
E-18
Download from Www.Somanuals.com. All Manuals Search And Download.
SCREEN SIZE
Normal
Displays pictures of normal size (i.e., a 4:3 aspect ratio).
Wide1
Displays natural-looking pictures of standard size on the wide screen.
Picture of
Wide1
Wide2
Zoom1
standard size
Wide2/Wide
Ideal for displaying vertically extended pictures such as squeezed pictures and recorded
HDTV programs.
Vertically
extended picture
Zoom1/Zoom
Enlarges horizontally extended pictures equally in all directions to maintain the aspect
ratio constant.
Horizontally
extended picture
Zoom2
Reduces the height of horizontally extended pictures with captions, without eliminating
the caption. Only the height of pictures is reduced, not the height of the caption.
Horizontally extended
picture with caption
Zoom2
(Captions may not be easy to read, however, depending on the picture.)
ASPECT RATIO
The following aspect ratios are available.
4:3 aspect ratio
4
16:9 aspect ratio
16
(VHF/UHF broadcasting, BS broadcasting)
(HDTV broadcasting)
3
9
1.85
2.35
1.85:1 aspect ratio
(Vista Vision size)
1
2.35:1 aspect ratio
(Cinema Vision size)
1
Information
You may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or Cinema
Vision size i.e., the sizes used frequently for picture software.
E-19
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING PICTURES (PICTURE MENU)
BASIC OPERATIONS [EX.: ADJUSTING TINT (Tint)]
You can make changes to all picture adjustment options in the PICTURE Menu.
The changes you make will be stored for a selected input mode. Therefore, you need to select a desired input mode before making any
changes.
Press
.
1
2
The main menu screen will appear.
Press
“PICTURE”.
or
to select
“PICTURE” selected in the main menu
screen
Each time you press or , one of the available
menus appears in the following sequence:
PICTURE
POSITION/SIZE
AUDIO
FEATURES
FACTORY DEFAULT
The PICTURE Menu screen will appear.
Press
Press
or
to select “Tint”.
3
4
.
The “Tint” adjustment screen will appear.
“Tint” selected in the PICTURE Menu
screen (Video Input Mode)
Press
values.
or
to change tint
5
6
: More greenish tint
: More purplish tint
“Tint” adjustment screen
Press
to store.
Press
when you finish.
* Repeat steps 3, 4, 5, and 6 when you wish to
make changes to other options.
E-20
Download from Www.Somanuals.com. All Manuals Search And Download.
• Contrast, brightness, color darkness, tint, and picture sharpness are adjusted as shown in the following chart.
Select the item with
, and then adjust with
. Finally, press
to implement the adjustments.
Adjustment Item
Adjustment Range/Remarks
Contrast
Lower contrast
Darker screen
Higher contrast
Brighter screen
Darker colors
–30 to +30
–60 to +60
–60 to +60
Brightness
Color
Lighter colors
Tint
More purplish colors
More greenish colors
–60 to +60 (RGB)
–30 to +30 (Video, S-video)
Sharpness
Softer pictures
Sharper pictures
–4 to +4 (RGB)
–16 to +16 (other than RGB)
• Setting Picture Mode (Picture Mode)
Can set up the picture mode.
Each time you press or , one of the available choices appears in the following sequence:
Dynamic: Suitable for watching a normal motion picture.(Standard)
Real:
Static:
Press
Makes a strong contrast picture.
Suitable for watching a still picture.
to store.
* Select Dynamic, Real or Static to suit your taste.
• Setting Luminance (Luminance)
Luminance can be set.
Use or to select a value between 40 and 100.
Press
to store.
* Settings can only be done when the Picture Mode is Static.
• Adjusting Color Temperature (Color Temp.)
Use or to specify a desired color temperature. Each time you press or , one of the
available choices appears in the following sequence:
–3500: More reddish colors
Standard: Standard color temperature
+3500: More bluish colors
User:
User Color Temp. setup
Press
to store.
• Setting User Color Temp. (User Color Temp.)
Can set up when User is selected in Color Temp.
Press
or
to select Red, Green or Blue and press or to make adjustment in the range
of 0 to 255.
Press
to store.
* Color Temp. setup is switched to User. The initial value of User Color Temp. is adjusted
individually at the factory.
User Color Temp.adjustment screen
* On-screen information disappears if you do not take any action for about 60 seconds.
E-21
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU)
BASIC OPERATION [EX.: ADJUSTING HORIZONTAL DIRECTION OF SCREEN
POSITION
]
You can make changes to all screen adjustment options in the POSITION/SIZE Menu.
The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any
changes.
Press
.
1
2
The main menu screen will appear.
Press
“POSITION/SIZE”.
or
to select
“POSITION/SIZE” selected from the main
menu screen
Each time you press or , one of the available
menus appears in the following sequence:
PICTURE
POSITION/SIZE
AUDIO
FEATURES
FACTORY DEFAULT
The POSITION/SIZE Menu screen will appear.
Press
“Position”.
or
to select
3
4
Press
.
The “Position” adjustment screen will appear.
Press
or
to select
“Horizontal” values of screen
position.
5
6
Press
or
to change
horizontal values.
:
:
Moves screen to the right.
Moves screen to the left.
“Position” adjustment screen
Press
Press
to store.
7
when you finish.
* Repeat steps 3 to 7 when you wish to make
changes to other options.
E-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Screen Position (Position)
Horizontal position (Horizontal)
:
:
Moves screen to the right.
Moves screen to the left.
→
→
“Position” adjustment screen
Vertical position (Vertical)
:
Moves screen up.
Moves screen down.
to store.
→
→
:
Press
Adjusting Screen Size (Size)
Screen width (Width)
→
→
:
:
Increases width.
Reduces width.
“Size” adjustment screen
Screen height (Height)
→
→
:
Increases height.
Reduces height.
to store.
:
Press
Setting Range
Video, S-video mode
RGB mode
Position
Horizontal: -30 to +30
Vertical
-150 to +150
Zoom:
-15 to +15
Others: -7 to +7
Size
-3 to +12 (P42HCA10/11/12)
-7 to +16 (P42VCA10/11/12)
-7 to +12 (P50XCA10/11/12)
-12 to +25 (P42HCA10/11/12)
-25 to +50 (P42VCA10/11/12, P50XCA10/11/12)
* Depending on the input signal, the adjustment range may differ.
* On-screen information disappears if you do not take any action for about 60 seconds.
E-23
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING AUDIO (AUDIO MENU)
BASIC OPERATION [EX.: ADJUSTING VOLUME BALANCE (Balance)]
You can make changes to all sound adjustment options in the AUDIO Menu.
The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any
changes.
Press
.
1
2
The main menu screen will appear.
Press
or
to select “AUDIO”.
“AUDIO” selected in the main menu screen
Each time you press or , one of the available
menus appears in the following sequence:
PICTURE
POSITION/SIZE
AUDIO
FEATURES
FACTORY DEFAULT
The AUDIO Menu screen will appear.
ＡＵＤＩＯ�
Press
“Balance”.
or
to select
Ｔｒｅｂｌｅ�
０�
－－－－－－－－－�
Ｂａｓｓ�
０�
０�
3
4
－－－－－－－－－�
Ｂａｌａｎｃｅ�
－－－－－－－－－�
Press
.
＜＞ ａｄｊｕｓｔ�
The “Balance” adjustment screen will appear.
“Balance” selected in the AUDIO Menu
screen
Press
or
to adjust the
balance.
5
6
: Higher volume from the right-hand speaker
: Higher volume from the left-hand speaker
Press
to store.
Press
when you finish.
* Repeat steps 3 to 6 when you wish to make
changes to other options.
* Audio Input menu will not be displayed when
“No Audio” is selected. (See P. E-30.)
E-24
Download from Www.Somanuals.com. All Manuals Search And Download.
ＡＵＤＩＯ�
Adjusting Treble (Treble)
Any value between -6 and +6 can be selected.
: Stronger treble
Each audio input
Each audio input
Each audio input
Each audio input
Ｔｒｅｂｌｅ�
０�
０�
０�
－－－－－－－－－�
Ｂａｓｓ�
－－－－－－－－－�
Ｂａｌａｎｃｅ�
－－－－－－－－－�
: Weaker treble
Adjusting Bass (Bass)
Any value between -6 and +6 can be selected.
: Stronger bass
＜＞ ａｄｊｕｓｔ�
“Treble” selected in the AUDIO Menu
screen
: Weaker bass
Adjusting Volume Balance (Balance)
Any value between -10 and +10 can be selected.
: Higher volume from the right-hand speaker
: Higher volume from the left-hand speaker
Setting Loudness (Loudness)
Corrects the balance between bass and treble for easy listening even with weak volume.
Each time you press or , one of the available choices appears in the following
sequence:
On
Off
On : Corrects bass and treble.
Off : Loudness dose not function.
* On-screen information disappears if you do not take any action for about 60 seconds.
* Cannot be set with P42VCA10/P42HCA10/P50XCA10.
E-25
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER ADJUSTMENTS (FEATURES MENU)
BASIC OPERATION [EX.: SELECTING LANGUAGE (Language)]
You can make the following changes in the FEATURES Menu.
Press
.
1
2
The main menu screen will appear.
Press
or
to select “FEATURES”.
“FEATURES” selected in the main menu
screen
Each time you press or , one of the available
menus appears in the following sequence:
PICTURE
POSITION/SIZE
AUDIO
FEATURES
FACTORY DEFAULT
The FEATURES Menu screen will appear.
Press
Menu".
or
to select "On Screen
3
4
• Select a desired option for adjustment/setup from
Adjustment, Function, On Screen Menu, Input
Terminal and Others.
Press
.
On Screen Menu screen
• On Screen Menu appears.
Press
“Language”.
or
to select
5
6
Press
.
The “Language” selection screen will appear.
“Language” selection screen
Press
language.
or
to select the
7
8
Press
.
The menu is displayed in the selected language.
Press
when you finish.
* Repeat steps 3 to 8 when you wish to make changes
to other options.
E-26
Download from Www.Somanuals.com. All Manuals Search And Download.
• FEATURES setup screen has the following 4 options.
Adjustment
: Can make a fine adjustment of pictures such as Dot Clock, Clamp Position.
On Screen Menu : Can make a display setting such as OSD, Language. (See P. E-28.)
Input Terminal : Can make an input terminal setting such as Video Input. (See P. E-28–E-29.)
Others
: Can make other settings. (See P. E-30–E-33.)
ADJUSTMENT
• Adjusting Dot Clock (Dot Clock)
for RGB
for RGB
You may find that pictures blur, depending on the clock frequency of your PC’s processor.
If you experience blurring, you can obtain a clearer picture by adjusting the “Dot Clock”.
Use or to select a value between -60 and +60.
Press
to store.
• Adjusting Clock Phase (Clock Phase)
You may find that pictures blur, depending on the clock phase of your PC’s processor. If you
experience blurring, you can obtain a clearer picture by adjusting the “Clock Phase”.
Use
or
to select "Auto" or "Manual".
Makes automatic adjustment.
Auto:
Manual: Makes manual adjustment.
Use or to specify a value between 1 and 32.
When selecting Manual by Clock Phase
Press
to store.
• Adjusting Clamp Position (Clamp Position)
for RGB
Adjusts clamp pulse in accordance with the input signal received from connected equipment.
Use or to specify a value between -8 and 8.
Press
to store.
• Selecting the Optimum Dynamic Range of Images (Auto Calibration)
for RGB
Receives a white screen signal and adjusts the dynamic range of images to the optimum.
(1) Select Auto Calibration and press
Auto Calibration screen appears.
(2) Select Execute and press
.
.
Press
Yes: Stores the data of Auto Calibration.
No: Disables the execution result of Auto Calibration.
or
to select Yes or No.
"Auto Calibration" setting screen
(3) Press
to execute.
"Yes/No" screen to select
* On-screen information disappears if you do not take any action for about 60 seconds.
E-27
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER ADJUSTMENTS (FEATURES MENU)(Continued)
ON SCREEN MENU
• Setting Display Information (OSD)
You can use this option to select whether to display information other than menus. (Error messages
are displayed regardless of what choice you make for this option.)
Each time you press , one of the available choices appears in the following sequence:
On
Off
On : Displays all information.
Off : Displays only menus and error messages.
Press
to store.
• Selecting Language (Language)
You can use this option to select the language displayed on the screen.
(1) Select “Language” and press
The “Language” selection screen will appear.
(2) Press or to select your desired language.
English
.
Deutsch (German)
Español (Spanish)
Français (French)
Italiano (Italian)
"Language" selection screen
Português (Portuguese)
Pyccкий(Russian)
(3) Press
.
The menu is displayed in the selected language.
* Russian can only be set with the E-model.
INPUT TERMINAL
• Selecting Video Mode (Video Input)
You can use this option to select the desired video mode of pictures it will receive to the Video Input
terminal.
Each time you press or , one of the available modes appears in the following sequence:
Auto:
Automatically selects NTSC, PAL and SECAM.
Other than Auto: You need to select a system appropriate to the input signal.
Press
to store.
• Selecting Video Mode (S-video Input)
You can use this option to select the desired video mode of pictures it will receive to S-video Input
terminal.
Each time you press or , one of the available modes appears in the following sequence:
Auto:
Other than Auto: You need to select a system appropriate to the input signal.
Press to store.
Automatically selects NTSC, PAL and SECAM.
E-28
Download from Www.Somanuals.com. All Manuals Search And Download.
• Selecting BNC Input (BNC-Input)
You can use this option to select the signal system it will receive to BNC Input terminal.
(1) Select BNC Input and press
BNC Input screen appears.
.
(2) Select the signal system to receive.
Each time you press or , one of the available choices appears in the following
sequence:
"BNC-Input" selection screen
RGB-Video: For using 0.3V input of sync. signal level with RGB signal input.
RGB-PC:
Decoder:
For using PC wih RGB signal input.
For using decoder with RGB signal input.
to select Mask.
(3) Press
or
(4) Select RGB-Video or Decoder by FUNCTION to set up Mask.
Each time you press or , one of the available choices appears in the following
sequence:
This fringe part is masked.
Off:
Does not mask.
Number: Masks the fringe (top, bottom, right and left) of the screen by the number of pixels specified.
(5) Press
to store.
• Selecting D-SUB Input (D-SUB Input)
You can use this option to select the signal system it will receive to D-SUB Input terminal.
(1) Select D-SUB Input and press
D-SUB Input screen appears.
.
(2) Select the signal system to receive.
Each time you press or , one of the available choices appears in the following
sequence:
RGB-PC
Decoder
"D-SUB Input" selection screen
RGB-PC: For using RGB for PC
Decoder: For using digital broadcast tuner
(3) Press
or
to select Mask.
(4) Select Decoder by FUNCTION to set up Mask.
Each time you press or , one of the available choices appears in the following
sequence:
This fringe part is masked.
Off:
Does not mask.
Number: Masks the fringe (top, bottom, right and left) of the screen by the number of
pixels specified.
(5) Press
to store.
* On-screen information disappears if you do not take any action for about 60 seconds.
E-29
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER ADJUSTMENTS (FEATURES MENU)(Continued)
OTHERS MENU
• Selecting time before DPMS starts (DPMS)
You can use this option to select the amount of time before the DPMS function starts.
DPMS (which stands for “display power management signaling”) allows the display to maintain an
automatic power saving function.
This function causes on-screen information to disappear until the next input operation, if the power
is ON and the display has not received any signals for the predetermined period of time. When
DPMS is active, the power indicator lamp turns orange.
(1) Select DPMS and press
DPMS screen appears.
.
DPMS selection screen
(2) Press
or
to select Time.
(3) Each time you press or , one of the available choices appears in the following sequence:
Off:
Disables DPMS
Number: Approximate time before DPMS starts. (Unit: minutes)
* The power indicator lamp turns orange while the DPMS is ON.
* The power turns ON automatically when the display receives a signal.
(4) Can specify background color.
Press
Each time you press or , one of the available choices appears in the following sequence:
Black White
or
to select background color.
Black: Mutes images in Black background.
White:Mutes images in White background.
* Switches approx. 20 seconds after the display stops receiving signals.
(5) Press
to store.
• Selecting input terminals (Audio Input)
You can use this option to select one of the three available terminals to receive sound from input
equipment.
(1) Select “Audio Input” and press
The “Audio Input” selection screen will appear.
(2) Press or to select input equipment.
.
(3) Select a desired input terminal.
Each time you press or , one of the available choices appears in the following sequence:
“Audio Input” selection screen
No audio: No sound in the corresponding mode.
Audio 1-3: Selects Audio 1 through 3 for receiving sound in the corresponding mode.
* Repeat steps (2) and (3) for each piece of input equipment.
(4) Press
to store.
* Audio Input menu will not be displayed when "No Audio"is selected.
* Cannot be set with P42VCA10/P42HCA10/P50XCA10.
E-30
Download from Www.Somanuals.com. All Manuals Search And Download.
• Minimizing phosphor burn-in (Screen Orbiter)
for RGB
You can use this option to move the screen position to minimize phosphor-induced “burn-in”.
Follow the steps below.
(1) Select “Screen Orbiter” and press
The “Screen Orbiter” setting screen will appear.
(2) Press or to select “Mode/Time”.
.
(3) Select a desired pattern.
“Screen Orbiter” setting screen
Each time you press or , one of the available choices appears in the following sequence:
Off: Disables Screen Orbiter.
Time: Moves the pattern approximately every one hour.
Mode: Moves the pattern when the power is turned ON or when you switch between modes.
(4) Press
or
to select “Moving Area”.
(5) Press or to select the range for moving the pattern.
Each time you press or , one of the available choices appears in the following sequence:
Min.: Pattern moves in small range. (About 5 pixels)
Std.: Pattern moves in moderate range. (About 10 pixels)
Max.: Pattern moves in wide range. (About 15 pixels)
(6) Press
to store.
Using screen protection functions (examples)
The screen protection functions minimize phosphor burn-in but cannot completely eliminate it.
When using the display occasionally
When using the display continuously
• Select a desired amount of time for “DPMS”.
When switching between RGB and video input modes only
occasionally
(1) Select “Time” for “Mode/Time” with “Screen Orbiter”.
(2) Select a desired range for “Moving Area” with “Screen Orbiter”.
This causes the screen saver pattern to move in the same range at
regular intervals.
Thus, when the display does not receive a signal, it will automatically
display white or black over the entire screen. When the predetermined
time elapses, the power will turn OFF.
When switching between RGB and video input modes
frequently
(1) Select “Mode” for “Mode/Time” with “Screen Orbiter”.
(2) Select a desired range for “Moving Area” with “Screen Orbiter”.
When the mode is switched from Video to RGB, the display position
moves.
• Input mode of priority (Input Priority)
You can use this option to switch between modes only when a signal is received through the
selected input mode terminal. You cannot switch the input mode.
Each time you press or , one of the available choices appears in the following sequence:
Off:
Switches between modes normally.
Other modes: Displays pictures when a signal is received through the selected input mode
terminal.
Press
to store.
* On-screen information disappears if you do not take any action for about 60 seconds.
E-31
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER ADJUSTMENTS (FEATURES MENU)(Continued)
• Assigning Numbers to Displays (Monitor No.)
When you use two or more displays, you can use a single remote control to control individual
displays by assigning a unique number to each of the displays.
Each time you press or , one of the available numbers appears in the following sequence:
0: You can normally control displays.
You cannot control displays if you press any of [SHIFT 1] through [SHIFT 4].
1–4: Allows you to control a desired display by pressing the corresponding button (one of
[SHIFT 1] through [SHIFT 4]).
When you do not press any of the SHIFT buttons, you can control all displays.
Press
to store.
* You can check the “Monitor No.” on the Information screen. (See P. E-33.)
• Setting RGB Input Signal Compulsorily (Direct Setting)
You can use this option to switch the setting for RGB input signal.
Each time you press or , one of the available choices appears in the
following sequence:
For RGB mode:
Auto: The optimum display is obtained automatically for input signals.
Others: The optimum resolution setting is fixed for each signal.
Press
to store.
* In Auto mode, the resolution of VGA, WVGA, 480P, XGA, WXGA, SXGA and SXGA+ may
not be automatically distinguished. Switch to the fixed display when the image is not displayed
properly.
• Specifying RGB Input Signal (Code Setting)
You can use this option to specify and display the type of RGB input signal by code number.
Each time you press
sequence:
or
, one of the available choices appears in the following
Auto
Manual
Auto: Automatically displays the input signal to the optimum.
Manual: Selects RGB code number.
Press
to store.
"Code Setting" setting screen
* In Auto mode, the optimum resolution may not be set up automatically depending on the type of
signal.
Select the type of signal when the image is not displayed properly.
However, note that when the type of signal is selected directly, the signal of other resolution
may not be displayed properly.
• Displaying white over entire screen (White Screen)
You can use this option to display white over the entire screen to minimize phosphor burn-in.
Each time you press or , one of the available choices appears in the following sequence:
On
Off
Off: Does not display white.
On: Displays a white screen immediately.
Press
to store.
E-32
Download from Www.Somanuals.com. All Manuals Search And Download.
• Setting Exhibition Mode (Exhibition Mode)
You can use this option to display the enhanced contrast, which is most suitable for the use by
unspecified persons.
Each time you press or , one of the available choices appears in the following sequence:
On
Off
On: Sets up Exhibition mode.
Off: Sets up normal mode.
Press
to store.
* In Exhibition mode, the display returns to the original setting in about 5 minutes even if the
adjustment is changed.
* The setup will be cancelled when removing the power plug from the receptacle.
• Horizontal/Vertical installation (Installation)
You can use this option to setup the number of fan rotation and the direction of display text of menu
or other screen for horizontal and vertical installation.
Each time you press or , one of the available choices appears in the following sequence:
-90 Deg. : Displays text from left to right when the display is installed with the power indicator lamp at the top.
Normal : Displays text normally.
+90 Deg. : Displays text from left to right when the display is installed with the power indicator lamp at the bottom.
Press
to store.
* Be sure to make this setup when changing the direction of installation.
• Displaying System Status (Information)
Displays system operation status.
Select “Information” and press
.
The “Information” screen will appear.
Mode:
Input mode
Monitor No.:
Monitor number
Freq. Scan Mode: Frequency scanning
Information screen (Video Input Mode)
Input Signal:
Input Sync.:
Freq.:
Video mode
Signal type
Frequency and polarity (fH, fV)
RGB code number
Preset No.:
Information screen (RGB2 Input Mode)
* On-screen information disappears if you do not take any action for about 60 seconds.
E-33
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIALIZATION OF USER ADJUSTMENT VALUE (FACTORY DEFAULT)
You can restore the values of the adjustment/setting made in the MENU to factory settings.
Press
.
1
2
The main menu screen will appear.
Press
DEFAULT”.
or
to select “FACTORY
“FACTORY DEFAULT” selected in the
main menu screen
Each time you press or , one of the available
menus appears in the following sequence:
PICTURE
POSITION/SIZE
AUDIO
FEATURES
FACTORY DEFAULT
The FACTORY DEFAULT Menu screen will
appear.
Press
.
3
* You can also use the
switches on the display’s
control panel to accomplish
these steps.
• Displays the message of whether to proceed
with the initialization.
Press
or
to select the Yes.
4
5
Displays the message of whether to
proceed the initialization
Press
.
• The message of having completed the
initialization will be displayed after initializing.
Press
when you finish.
Displays the message of having
completed the initialization
E-34
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTIONS
Wall-mounting unit
0° to 15° mounting angle
P-WB4200
Hanging unit
0° to 15° mounting angle
P-CT4200
Stand
P-TT4200
Speaker
P-42SP11 (for 42”)
P-50SP01 (for 50”)
(1 set of 2 speakers)
Speaker Stand
Videoboard
P-42ST11 (for 42”)
P-50ST01 (for 50”)
(1 set of 2 speakers stands)
P-TE1020E
* When installing an option, make sure that all installation requirements for that option (as given in the relevant instruction manual) are met.
* The colors of options do not match the display colors perfectly.
Warning
To prevent injury, fire, and electric shock, arrange for options to be initially installed (or installed at a different location) by your dealer.
CAUTION: This display (P42VCA10/P42VCA11/P42VCA12/P42HCA10/P42HCA11/P42HCA12/
P50XCA10/P50XCA11/P50XCA12) is for use only with Fujitsu General Limited’s option
(P-WB4200, P-CT4200, P-TT4200).
Using this display with other option can cause instability resulting in possible injury.
E-35
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTIONS (Continued)
INSTALLATION
1. Turn the power supply switch to OFF.
2. Remove the power plug from outlet.
3. Remove the plate attached to the bottom rear of the main unit from
the Video board unit mounting bracket (3 mm screw w/spring X 3).
4. Insert the Video board unit into the main unit slot using the guides
on the sides.
5. Completely insert the Video board until the plate touches the main
unit box.
6. Mount the plate using the 3 screws with spring removed earlier.
7. Affix the enclosed connector label to the marking position on the
rear cover.
Connecting the signal input cable
For details, see “Connecting to External Equipment” in the main
unit instructions manual.
CAUTION: Follow the items given below, to prevent accidental injuries and possible electrical shock.
Turn off the power supply and disconnect the power plug from outlet before installing the Video board unit.
Do not remove the cabinet when installing the Video board unit.
Do not remove screws expect for the specified user service screw marked “ ”.
Do not use screws other than that specified in this manual for the installation of this Video board unit.
E-36
Download from Www.Somanuals.com. All Manuals Search And Download.
FACTORY SETTINGS
This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value
of the first input signal.
To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on P. E-22–E-23 to adjust the
parameters. When you finish, the settings will be automatically stored. Thus, when the display receives that signal, pictures will be
displayed in accordance with the settings you most recently selected.
Main corresponding signals (RGB mode)
Display (dots x lines)
640 x 480
Horizontal frequency (kHz)
Vertical frequency (Hz)
59.94
Signal
31.47
37.50
43.27
31.47
37.88
46.88
53.67
48.36
60.02
68.68
63.98
79.98
75.00
106.25
31.02
31.72
47.71
15.73
15.63
VGA
640 x 480
640 x 480
720 x 400
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
1600 x 1200
1600 x 1200
848 x 480
852 x 480
1360 x 768
720 x 485
720 x 575
75.00
85.01
70.09
60.32
75.00
85.06
60.00
75.03
84.99
60.02
75.03
60.00
85.00
60.00
59.97
60.01
59.94
50.00
VGA 75 Hz
VGA 85 Hz
400 lines
SVGA 60 Hz
SVGA 75 Hz
SVGA 85 Hz
XGA 60 Hz
XGA 75 Hz
XGA 85 Hz
SXGA 60 Hz
SXGA 75 Hz
UXGA 60 Hz
UXGA 85 Hz
60 fields
50 fields
* With some input signals, “Out of range” may appear even when the horizontal and vertical frequencies are within their permissible ranges. Make
sure that the vertical frequency of the input signal is 85 Hz or less for SVGA/XGA/UXGA, 75 Hz or less for SXGA.
In the Video/S-video modes, the display has been factory-set as follows for different input signals:
Main corresponding signals (Video, S-video mode)
Horizontal
Vertical
Signal
NTSC
frequency (kHz)
frequency (Hz)
15.73
15.63
15.63
15.63
15.73
59.94
50.00
50.00
59.52
59.94
PAL
SECAM
PAL60
4.43NTSC
• Depending on the input signal, the display may show pictures of reduced size due to size reduction and interpolation.
• “Out of range” appears if the display receives a signal whose characteristic does not fall within the display’s permissible range.
• You can check input signals through “Information” on the FEATURES Menu screen. (See P. E-33.)
• In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items.
• All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.
E-37
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATION
Model
P42VCA10W/E/A
42" wide screen:
P42VCA11W/E/A
P42VCA12W/E/A
Screen size
92.1 cm (W) x 51.8 cm (H) (105.7 cm diagonal)
36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal)
Aspect ratio
16:9 (wide)
Weight
28.5 kg / 62.8 lbs
Outer dimensions
103.5 (W) x 64.0 (H) x 8.5 (D) cm
40.7 (W) x 25.2 (H) x 3.3 (D) inch
Power supply
110–240 VAC 50/60 Hz
Current rating
Number of pixels
Display modes
3.0–1.3 A
3.1–1.4 A
3.0–1.3 A
852 (H) x 480 (V)
Video, S-video input:
RGB:
Normal/Wide1/Wide2/Zoom1/Zoom2
Normal/Wide/Zoom
Colors
16.77 million
Sound output
2.5 W + 2.5 W (EIAJ), 8 Ω
Speaker
2-internal
External equipment terminals
Video input terminals
VIDEO1 INPUT (Video input)
VIDEO2 INPUT (S-video input)
1 RCA terminal 1 Vp-p/75 Ω
1 S terminal Y: 1 Vp-p/75 Ω
C: 0.286 Vp-p/75 Ω
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Applicable–syst–em–s–
–NTS–C/PAL/SECAM/PAL6–0/–4.4–3N–TSC –
PC input terminal
RGB1 input
RGB2 input
mD-sub, 3 rows, 15-pin
Picture signal: 0.7 Vp-p/75 Ω
Synchronization signal:TTL level
BNC terminal x 5 R: 0.7 Vp-p/75 Ω
G: 0.7 Vp-p/75 Ω
B: 0.7 Vp-p/75 Ω
H: TTL Level or ANALOG (75 Ω)
V: TTL Level or ANALOG (75 Ω)
Sound terminals
Control terminal
2 sound input pin jacks (L/R) (3 lines)
500 mVrms/ at least 22 kΩ
1 RS-232C connector (D-sub 9-pin)
External speaker output terminal
Effective max. output:
20 W + 20 W (EIAJ), 4 Ω
Operating conditions
Accessories
Temperature: 0 to 40 °C / 32 to 104 °F
Humidity: 20 to 80 %
1 remote control, 2AA batteries, 1 instruction manual, 1 power cable, 2 big ferrite cores,
2 small ferrite cores (P42VCA11)
Regulation---P42VCA10W/E/A, P42VCA11W/E/A, P42VCA12W/E/A
• UL, CSA Safety: UL6500, C-UL
EMC: FCC Part 15 Class A, ICES-003 Class A
• CE Safety: EN60065
EMC: EN55022
EN61000-3-2
1998, Class A
1995
EN61000-3-3
EN55024
1995
1998
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
1995
1996
1995
1995
1996
1993
EN61000-4-11 1994
• AS Safety: IEC60065
EMC: AS/NZS 3548
E-38
Download from Www.Somanuals.com. All Manuals Search And Download.
Model
P42HCA10W/E/A
42" wide screen:
P42HCA11W/E/A
P42HCA12W/E/A
Screen size
92.2 cm (W) x 52.2 cm (H) (106.0 cm diagonal)
36.3 inch (W) x 20.6 inch (H) (41.7 inch diagonal)
Aspect ratio
16:9 (wide)
Weight
28.5 kg / 62.8 lbs
Outer dimensions
103.5 (W) x 64.0 (H) x 8.5 (D) cm
40.7 (W) x 25.2 (H) x 3.3 (D) inch
Power supply
110–240 VAC 50/60 Hz
Current rating
Number of pixels
Display modes
4.3–1.8 A
4.4–1.9 A
4.3–1.8 A
1024 (H) x 1024 (V)
Video, S-video input:
RGB:
Normal/Wide1/Wide2/Zoom1/Zoom2
Normal/Wide/Zoom
Colors
16.77 million
Sound output
2.5 W + 2.5 W (EIAJ), 8 Ω
Speaker
2-internal
External equipment terminals
Video input terminals
VIDEO1 INPUT (Video input)
VIDEO2 INPUT (S-video input)
1 RCA terminal 1 Vp-p/75 Ω
1 S terminal Y: 1 Vp-p/75 Ω
C: 0.286 Vp-p/75 Ω
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Applicable–syst–em–s–
–NTS–C/PAL/SECAM/PAL6–0/–4.4–3N–TSC –
PC input terminal
RGB1 input
RGB2 input
mD-sub, 3 rows, 15-pin
Picture signal: 0.7 Vp-p/75 Ω
Synchronization signal:TTL level
BNC terminal x 5 R: 0.7 Vp-p/75 Ω
G: 0.7 Vp-p/75 Ω
B: 0.7 Vp-p/75 Ω
H: TTL Level or ANALOG (75 Ω)
V: TTL Level or ANALOG (75 Ω)
Sound terminals
Control terminal
2 sound input pin jacks (L/R) (3 lines)
500 mVrms/ at least 22 kΩ
1 RS-232C connector (D-sub 9-pin)
External speaker output terminal
Effective max. output:
20 W + 20 W (EIAJ), 4 Ω
Operating conditions
Accessories
Temperature: 0 to 40 °C / 32 to 104 °F
Humidity: 20 to 80 %
1 remote control, 2AA batteries, 1 instruction manual, 1 power cable, 2 big ferrite cores,
2 small ferrite cores (P42HCA11)
Regulation---P42HCA10W/E/A, P42HCA11W/E/A, P42HCA12W/E/A
• UL, CSA Safety: UL6500, C-UL
EMC: FCC Part 15 Class A, ICES-003 Class A
• CE Safety: EN60065
EMC: EN55022
EN61000-3-2
1998, Class A
1995
EN61000-3-3
EN55024
1995
1998
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
1995
1996
1995
1995
1996
1993
EN61000-4-11 1994
• AS Safety: IEC60065
EMC: AS/NZS 3548
E-39
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATION (Continued)
Model
P50XCA10W/E/A/U
P50XCA11W/E/A/U
P50XCA12W/E/A/U
Screen size
50" wide screen:
110.6 cm (W) x 62.2 cm (H) (126.9 cm diagonal)
43.5 inch (W) x 24.5 inch (H) (50.0 inch diagonal)
Aspect ratio
Weight
16:9 (wide)
45.0 kg / 99.2 lbs
Outer dimensions
121.2 (W) x 72.6 (H) x 9.8 (D) cm
47.7 (W) x 28.6 (H) x 3.9 (D) inch
Power supply
Current rating
220–240 VAC 50/60 Hz (W/E/A)
120 VAC 50/60 Hz (U)
2.6–1.9 A (W/E/A)
2.7–2.0 A (W/E/A)
2.6–1.9 A (W/E/A)
4.8 A (U)
4.9 A (U)
4.8 A (U)
Number of pixels
Display modes
1366 (H) x 768 (V)
Video, S-video input:
RGB:
Normal/Wide1/Wide2/Zoom1/Zoom2
Normal/Wide/Zoom
Colors
16.77 million
Sound output
2.5 W + 2.5 W (EIAJ), 8 Ω
Speaker
2-internal
External equipment terminals
Video input terminals
VIDEO1 INPUT (Video input)
VIDEO2 INPUT (S-video input)
1 RCA terminal 1 Vp-p/75 Ω
1 S terminal
Y:
C:
1 Vp-p/75 Ω
0.286 Vp-p/75 Ω
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Applicable systems
PC input terminal
NTSC/PAL/SECAM/PAL60/4.43NTSC
RGB1 input
mD-sub, 3 rows, 15-pin
Picture signal: 0.7 Vp-p/75 Ω
Synchronization signal:TTL level
RGB2 input
BNC terminal x 5 R: 0.7 Vp-p/75 Ω
G: 0.7 Vp-p/75 Ω
B: 0.7 Vp-p/75 Ω
H: TTL Level or ANALOG (75 Ω)
V: TTL Level or ANALOG (75 Ω)
Sound terminals
Control terminal
2 sound input pin jacks (L/R) (3 lines)
500 mVrms/at least 22 kΩ
1 RS-232C connector (D-sub 9-pin)
External speaker output terminal
Operating conditions
Accessories
Effective max. output:
12 W + 12 W (EIAJ), 6 Ω
Temperature: 0 to 40 °C / 32 to 104 °F
Humidity: 20 to 80 %
1 remote control, 2AA batteries, 1 instruction manual, 1 power cable, 2 big ferrite cores,
2 small ferrite cores (P50XCA11)
Regulation---P50XCA10W/E/A/U, P50XCA11W/E/A/U, P50XCA12W/E/A/U
• UL, CSA Safety: UL6500, C-UL
EMC: FCC Part 15 Class A, ICES-003 Class A
• CE Safety: EN60065
EMC: EN55022
EN61000-3-2
1998, Class A
1995
EN61000-3-3
EN55024
1995
1998
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
1995
1996
1995
1995
1996
1993
EN61000-4-11 1994
• AS Safety: IEC60065
EMC: AS/NZS 3548
• Specifications and external appearance may be change for the sake of improvement.
•
is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.
E-40
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANING AND MAINTENANCE
Precautions
Cleaning the Cabinet and Remote Control
Be sure to remove the power plug from the receptacle before
Use a soft cloth for cleaning.
cleaning the display.
If the cabinet or remote control is heavily stained, soak a soft cloth
in a mixture of water and detergent and squeeze it dry before
wiping off the stains. Use a soft, dry cloth for final cleaning.
Be sure not to clean the display using a cloth dampened with
volatile solvents, such as benzene or thinner. Such solvents can
harm the display’s cabinet, the filter at the screen front, and the
remote control. They can also cause paint to come off these
Cleaning the ventilation grille
Remove dust from the ventilation grille in the rear of the main unit
periodically with a vacuum cleaner as the accumulated dust can
increase the internal temperature of the main unit causing machine
failure or fire hazard.
sections.
Cleaning the Screen
Clean the screen gently with a soft cloth.
The screen surface is fragile. Never attempt to clean it with a hard
material, press on it forcefully, or tap it.
HANDY TIPS
In the event of problems with the display, check the following explanations before contacting your dealer for servicing.
Problem
• Power does not turn ON.
• No pictures are displayed.
Action
• Check whether the power plug is securely inserted into the receptacle.
• Check cables for disconnection.
• Check whether the power for all input equipment is ON.
• Check for connection to wrong terminals or for wrong input mode.
• Check whether the input mode display is colored pink.Special setup may have been
made. Return to original setup or initialize the User adjustment value.
• Remote control does not function properly. • Check for incorrect battery orientation.
• Check for dead batteries.
• Check for distance from the display.
• Check whether you are pointing the remote control transmitter properly at the display’s
receiver.
• Check for any obstacle between the remote control and the display.
• The display makes a snapping sound.
• The display makes a buzzing sound.
• There are spots on the screen.
• Degraded colors/tints
• This sound is produced when the cabinet expands or contracts due to variations in
temperature. This sound does not indicate that the display has a problem.
• The display has fans to maintain the temperature of internal components at a constant
level. This sound is produced by the fan as it rotates.
• Check whether your AV equipment is affected by interference from automobiles, trains,
high-voltage transmission lines, neon signs or other potential sources of interference.
• Check whether all picture adjustments have been properly made.
(See “Adjusting Pictures” on P. E-20–E-21.)
• Improper screen position/size
• Check whether screen position and size have been properly adjusted.
(See “Adjusting Screen Position and Size” on P. E-22–E-23.)
• No sound from external speakers
• No sound
• Check cables for disconnection.
• Check whether you have selected “No Audio” for the “Audio Input” setting.
(See “Features” on P. E-30.)
• If “Invalid operation” appears.
• Check whether you have selected “Input Priority”.(See “Features” on P. E-31.)
• If “Out of range” appears, the display is
receiving a signal whose picture or signal
cannot be reproduced by the display.
• The screen turns to black and white.
• Input proper signals.
Make sure that the vertical frequency of the input signal is 85 Hz or less for SVGA /
XGA / UXGA, 75 Hz or less for SXGA.
• If “Error message Condition 1” appears,
the fan is defective.
• Remove the power plug from the receptacle, and contact your dealer for repairs.
• If “Error message Condition 2” appears,
the display’s internal components are
extremely hot.
• Remove the power plug from the receptacle. (You can turn the power back ON again
when the components have cooled sufficiently.) If the message appears again when you
turn the power back on, remove the power plug from the receptacle, and contact your
dealer for a repairs.
• If "Change refresh rate to 60Hz"appears,
• If the power indicator lamp flashes red.
• The picture may get blurred with vertical frequency of other than 48.3-51.8 or 58.4-61.4
(Hz). Change the setting of your PC, etc.
• Remove the power plug from the receptacle, and inform your dealer about how the lamp
flashed.
As explained below, the power indicator lamp flashes differently depending on the type
of problem:
– Flashes repeatedly: Improper supply voltage level
– Flashes once: Malfunction by the fan
– Flashes twice: Excessive temperature
– Flashes three times or more: Other problems
E-41
Download from Www.Somanuals.com. All Manuals Search And Download.
|