Fujitsu Computer Systems Corporation
Battery Charger User’s Guide
This user’s guide contains information on your battery charger.
We strongly recommend that you read this guide before using
the battery charger even if you are already familiar with computers.
BATTERY CHARGER COMPONENTS
Battery
Connector 2
Battery
Connector 1
Power
Indicator
LED
AC Adapter
Connector
Charge Indicator LEDs
Figure 1. Battery Charger Components
Power Indicator LED
The Power Indicator LED is on when power is being supplied from
the AC adapter.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY CHARGER OPERATION
The Power Indicator LED is on when the battery charger is
connected to a plugged-in AC adapter. The two Charge Indicator
LEDs show the charging status of the battery connected to the
charger or the condition of the charger itself, as shown in Table 1.
Charge Indicator
Flashes orange
Steady orange
Steady green
Steady red
Charging Condition
Standing by for charging
Charging
Charging is complete
Battery failure
Flashing red
No light
Charger failure
Battery not connected
Table 1. Indicator Status
• If the charger detects that something is
wrong with the battery, the Charging
Indicator LED will turn a steady red. If this
happens, immediately remove the battery
from the charger.
• If the battery charger detects a failure in its
charging circuit, the Charging Indicator LED
will blink red. If this happens, immediately
disconnect the AC adapter and remove the
battery from the charger.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
The following items can affect the battery charger’s performance:
•
After a battery has been charging for a period (as noted below),
the battery charger will stop charging (regardless of the charge
level) and the Charge Indicator LED will turn green. This is a
safety feature to prevent damage to the battery.
Battery Capacity
Less than 2500 mAh
2500 mAh to 4100 mAh
Over 4100 mAh
Charging Time
5 hours
8 hours
12 hours
•
•
•
When a battery has been left unused for a long time, it will take
longer to charge.
When the ambient temperature is low, it will take longer to
charge a battery.
If the temperature of a battery connected to the charger is
extremely high or low, the battery charger will standby for charg-
ing until the battery returns to normal temperature. This is a
safety feature designed to prevent damage to the battery.
USING THE BATTERY CHARGER
To charge a battery, follow these steps:
1. Connect the battery charger to the AC adapter.
2. Plug the AC adapter into an AC outlet. (Figure 2)
3. The Power Indicator LED will light up and the Charging Indi-
cator LED(s) will flash orange once.
4. When the Charging Indicator LED(s) turns off, align the plastic
key pin of the battery connector with the corresponding guide
in the battery socket. Be very careful to align the battery and
charger properly. (Figure 3)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
• The charger can have two batteries con-
nected at the same time, but it charges only
one at a time. The battery that was con-
nected first is charged first. The second bat-
tery is held in a wait status until the first
battery is completely charged.
• Charging time varies depending on the
environmental conditions (such as tempera-
ture) or deterioration of the battery(s).
5. The Charging Indicator LED(s) will turn orange when the
battery(s) is being charged.
6. The Charging Indicator LED(s) will turn green when charging
is completed.
Figure 2. Connecting the AC Adapter
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Note that the
battery shown is for
illustration only; your
battery may appear different.
Figure 3. Connecting the battery
CARE AND MAINTENANCE
•
•
Never connect the battery charger to a physically defective
battery or use a defective charger.
When the battery charger is not being used for charging, be sure
to disconnect the AC adapter and remove any battery connected
to the charger to avoid the chance of fire or equipment failure.
When disconnecting the AC adapter, do not pull on the cable to
remove the adapter. Always remove by grasping the plug body.
If the battery charger smokes, smells strange, heats abnormally,
or makes noise, immediately disconnect the AC adapter, and
contact your Fujitsu reseller (see “Fujitsu Computer Systems
Contact Information” below). It is normal for the charger to
become slightly warm during charging.
•
•
•
•
Do not use the battery charger in humid, dusty, or poorly
ventilated places.
Do not use the battery charger if any foreign substance, such as
water, dirt, etc. has gotten inside.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL SUPPORT
Fujitsu Computer Systems Contact Information
If you have problems you are unable to resolve, consult your
support representative, toll free at:
•
•
•
1-800-8FUJITSU (1-800-838-5487)
E-mail: [email protected]
SPECIFICATIONS
Specification
Details
16V/40W
This unit is to be powered by
the power supply, UL Listed
and class 2 adapter, rated 16
Vdc, 2.5A
Power Requirements
Operating Temperature
Operating Humidity
5°C – 35°C
10% to 90%
Maximum Outer
Dimensions
3.9" x 3.54" x 1.2" (100 mm x
90 mm x 30 mm)
Weight
0.5 lbs. (230g)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
DECLARATION OF CONFORMITY
according to FCC Part 15
Responsible Fujitsu Computer Systems Corporation
Party Name:
Address: 1250 E. Arques Avenue (M/S 122),
Sunnyvale, California 94085
Telephone: (408) 746-6000
Declares that product: Battery Charger Model FJBC-GP
(FCS Part Number FPCBC26)
Complies with Part 15 of the FCC Rules.
This device complies with Part 15 of the FCC rules. Operations are subject
to the following two conditions:(1) This device must not be allowed to cause
harmful interference, (2) This device must accept any interference received,
including interference that may cause undesired operation.
Declaration of Conformity
Model Name: Battery Charger FJBC-GP
Conformance to Directive(s)/Product Standard:
89/336/EEC and 73/23/EEC
8
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Notices
Notice to Users of Radios and Television
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interference to radio commu-
nications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet that is on a different circuit than
the receiver.
•
Consult the dealer or an experienced radio/TV technician for help.
Shielded interconnect cables must be employed with this equipment
to ensure compliance with the pertinent RF emission limits
governing this device.
DOC (Industry Canada) Notices
Notice to Users of Radios and Television
This Class B digital apparatus meets all requirements of the Canadian Inter-
ference-Causing Equipment Regulations.
CET appareil numérique de la class B respecte toutes les exigence du Régle-
ment sur le matérial brouilleur du Canada.
Notice to All Users
The Battery Charger can only be operated at a maximum ambient tempera-
ture of 35° C (95° F).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning
Handling the cord on this product will expose
you to lead, a chemical known to the State of
California to cause birth defects or other
reproductive harm.
Wash hands after handling.
Fujitsu Computer Systems Corporation
1250 E. Arques Avenue, (M/S 122)
Sunnyvale, California 94085
For more information, call 1-800-FUJITSU
or visit our Web site at:
For technical support call:1-800-8FUJITSU (1-800-838-5487) or e-mail
us at: [email protected]
Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Ltd. All other
trademarks mentioned herein are the property of their respective owners.
Product description data reflects Fujitsu design objectives and is provided for
comparative purposes; actual results may vary based on a variety of factors.
Specifications are subject to change without notice.
© 2008 Fujitsu Computer Systems Corporation. All rights reserved.
B5FY-8881-01EN-00
12
Download from Www.Somanuals.com. All Manuals Search And Download.
|