All about the
Use & Care
of your Dryer
TABLE OF CONTENTS
Important Safety Instructions..............................2-5
Features...............................................................6
Operating Instructions......................................7-13
Care and Cleaning...............................................14
Solutions to Common Problems.......................15-16
Warranty ............................................................17
Notes .................................................................18
Français..............................................................19
Español ..............................................................37
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Product Record
WARNING
Please read all instructions before using this dryer.
Record Your Model and Serial Numbers
The model and serial numbers of your dryer are found
on the dryer serial plate located inside the door opening.
Record and retain these numbers.
Recognize safety symbols, words
and labels
Safety items throughout this manual are labeled with
a WARNING or CAUTION based on the risk type as
described below:
Model Number _________________________
Serial Number _________________________
Purchase Date _________________________
Definitions
This is the safety alert symbol. It is used to alert
you to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury
or death.
Read all instructions before using this appliance. This
book contains valuable information about:
•
•
•
Operation
Care
Service
Keep it in a safe place.
DANGER
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious
injury.
This Use and Care Guide provides general operating
instructions for your dryer. It also contains information
about features for several other models. Your dryer may
not have every feature included.
Use the dryer only as instructed in this Use & Care
Guide.
WARNING
WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
NOTE
CAUTION
The instructions appearing in this Use and Care
Guide are not meant to cover every possible condition
and situation that may occur. Common sense and cau-
tion must be practiced when installing, operating and
maintaining any appliance.
CAUTION indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
IMPORTANT
IMPORTANT indicates installation, operation or
maintenance information which is important but not
hazard-related.
Save these instructions for future reference.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
240 v Electrric Dryer
120 v Gass Dryer
Groundiing type
wall receeptacle
10-30R
3-wire
UL-appprovveed service
Do not, under
any circumsstances,
cut, remove,
cord must bee installed
on electriic dryers (not
provided wwith unit
except those
(fused 30 amp)
or bypass the
groundingg prong.
manufactured for sale
in Canada).
14-30R
4-wire
(fused 30 amp)
Power cord with
3-prong grounded plug
Avoid fire hazard or electrical shock. Do not use an adaptor plug or extension cord or remove grounding
prong from electrical power cord. Failure to follow this warning can cause serious injury, fire or death.
WARNING - RISK OF FIRE
To reduce the risk of fire, electrical shock, or injury to persons when using this dryer, comply with the basic warnings
listed below. Failure to comply with these warnings could result in serious personal injuries.
You can be killed or seriously injured if you don’t follow these Important Safety Instructions:
PREVENT FIRE
• Clean the lint screen before or after each load. The in-
terior of the dryer, lint screen housing and exhaust duct
should be cleaned approximately every 18 months by
qualified service personnel. An excessive amount of lint
build-up in these areas could result in inefficient drying
and possible fire. See Care and Cleaning.
• Do not operate the dryer if the lint screen is blocked,
damaged or missing. Fire hazard, overheating and
damage to fabrics can occur.
• Do not obstruct the flow of ventilating air. Do not stack
or place laundry or throw rugs against the front or back
of the dryer.
• Do not spray any type of aerosol into, on or near dryer
at any time.
• Do not use fabric softeners or products to eliminate
static unless recommended by the manufacturer of the
fabric softener or product.
• Do not continue to use the dryer is you hear squeaking,
grinding, rubbing or other unusual noises. This could be
a sign of mechanical breakdown and lead to fire or seri-
ous injury. Contact a qualified technician immediately.
• Failure to comply with these warnings could result in
fire, explosion, serious bodily injury and/or damage to
the rubber or plastic parts of the dryer.
• Do not dry items that have been previously cleaned in,
soaked in, or spotted with gasoline, cleaning solvents,
kerosene, waxes, etc. Do not store these items on or
near the dryer. These substances give off vapors that
could ignite or explode.
• Do not place items exposed to cooking oils in your dryer.
Items contaminated with cooking oils may contribute to
a chemical reaction that could cause a load to catch fire.
• Do not dry articles containing rubber, plastic or similar ma-
terials such as bras, galoshes, bath mats, rugs, bibs, baby
pants, plastic bags and pillows that may melt or burn.
Some rubber materials, when heated, can under certain
circumstances produce fire by spontaneous combustion.
WARNING
FIRE HAZARD
A clothes dryer produces combustible lint. The dryer
must be connected to an outdoors exhaust. Regularly
inspect the outdoor exhaust opening and remove any
accumulation of lint around the opening and in the
surrounding area.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
PROTECT CHILDREN
• ALWAYS disconnect the dryer from the electrical supply
before attempting any service or cleaning. Failure to do so
can result in electrical shock or injury.
• Do not use any type spray cleanser when cleaning dryer
interior. Hazardous fumes or electrical shock could occur.
• To prevent injury, do not reach into the dryer if the drum
is moving. Wait until the dryer has stopped completely
before reaching into the drum.
• Do not allow children to play on or in the dryer. Close
supervision of children is necessary when the dryer is
used near children. As children grow, teach them the
proper, safe use of all appliances.
• Destroy the carton, plastic bag and other packing ma-
terials after the dryer is unpacked. Children might use
them for play. Cartons covered with rugs, bedspreads
or plastic sheets can become airtight chambers.
• Keep laundry products out of children’s reach. To pre-
vent personal injury, observe all warnings on product
labels.
• Before the dryer is removed from service or discarded,
remove the dryer door to prevent accidental entrapment.
• Failure to comply with these warnings could result in
serious personal injuries.
PREVENT INJURY
PREVENT INJURY AND DAMAGE TO THE DRYER
• All repairs and servicing must be performed by an
authorized servicer unless specifically recommended in
this Owner’s Guide. Use only authorized factory parts.
• Do not tamper with controls.
• Do not sit on, step on or stand on the dryer. Do not
rest heavy loads on top. The dryer is not meant to
support weight.
• To prevent shock hazard and assure stability during
operation, the dryer must be installed and electrically
grounded by a qualified service person in accordance with
local codes. Installation instructions are packed in the
dryer for the installer’s reference. Refer to INSTALLATION
INSTRUCTIONS for detailed grounding procedures. If the
dryer is moved to a new location, have it checked and
reinstalled by a qualified service person.
• To prevent personal injury or damage to the dryer, the
electrical power cord of a gas dryer must be plugged into
a properly grounded and polarized 3-prong outlet. The
third grounding prong must never be removed. Never
ground the dryer to a gas pipe. Do not use an extension
cord or an adaptor plug.
• Do not install or store the dryer where it will be ex-
posed to the weather.
• A thermal limiter switch automatically turns off the
motor in the unlikely event of an overheated situation
(electric dryers only). A service technician must replace
the thermal limiter switch after correcting the fault.
• Failure to comply with these warnings could result in
serious personal injuries.
CAUTION
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of
substances known to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to
warn customer of potential exposure to such substances. Included in this list are soot and carbon monoxide, both of
which may be produced by the use of this product.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Cycle Selector
LCD Display
Control Lock
Reversible Door
Drum Light
Large Surface
Moisture Sensor
Door Latch
Exhaust Channel
Outlet
Door Strike
Adjustable
Leveling Legs
Heavy Duty
Drying Rack*
Lint Filter
Stacking Kit for Mounting
on Matching Washer*
*Not all models come with drying rack and
stacking kit from the factory. They may be
purchased as accessories.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
Normal Operating Sounds
You may or may not hear the following sounds from your
new dryer:
A
A. WATER VALVE (Steam models only.) The flow
of water is controlled by electric solenoids. During
operation there may be a clicking sound as the valve
opens and closes to control the water flow.
B. SUSPENSION ROLLERS The dryer drum is
supported by a set of suspension rollers. At times
there may be a thumping or rolling sound when the
dryer starts. This may happen if the dryer has not
been in use for a period of time, or after a heavy
load has remained in the dryer drum for an extended
period, creating a temporary flat spot on the edge
of the roller. The noise should dissipate as the dryer
operates and the flat spots smooth out.
B
C. AIR FLOW SYSTEM Your dryer is equipped with a
high volume air handling system. In some installations
there may be some sounds associated with air
movement throughout the dryer, including the air duct,
blower, and exhaust system. This is normal and can
vary with load size and type.
E
D
D. GAS VALVE (Gas models only.) The flow of gas is
controlled by electric solenoids. During operation there
may be a clicking sound as the valve opens and closes to
control the gas flow.
C
E. GAS BURNER (Gas models only.) When the burner
is operating, there may be sounds generated as the
air flow mixes with the gas flame. This noise is normal
and will only occur when the gas is ignited in the
combustion tube.
CAUTION
Do not continue to use the dryer if you hear squeaking,
grinding, rubbing or other unusual noises. This could
be a sign of mechanical breakdown and lead to fire or
serious injury. Contact a qualified technician immediately.
Operating Your Dryer
WARNING
To reduce the risk of fire, electric shock or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS
in this Use and Care Guide before operating your dryer.
1
Prepare load for drying.
• Dry items of similar fabric, weight and construction
in the same load.
• Separate dark items from light-colored items. Sepa-
rate items that shed lint from those that attract lint.
• Check for stains which may not have been removed
in washing. Repeat stain removal process and wash
again before drying. Dryer heat may permanently
set some stains.
• Place delicate or small items in a mesh bag.
• Be sure buckles, buttons and trim are heatproof
and won’t damage the drum finish. Close zippers;
fasten hooks and Velcro®-like fasteners. Tie strings
and sashes to prevent snagging and tangling.
(Mesh bag not included.)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
Operating Your Dryer, continued
• Adjustments made to a cycle will be remembered
and recalled each time that cycle is selected in the
future.
2
Check that the lint filter is
clean and in place.
To return to factory
settings, press these
two buttons at the
same time and
hold until the signal
sounds.
CAUTION
Do not operate dryer without
lint filter in place.
3
Load the dryer and close the door.
• Load items loosely. The average wet load will
fill the drum 1/3 to 1/2 full. Items need room to
tumble freely for even drying and less wrinkling.
• If desired, place a dryer fabric softener sheet on
top of the load at the beginning of the cycle.
• To save energy and time and avoid uneven drying
and wrinkling, do not overload the dryer.
• When drying large items, dry only two or three
items at a time. Fill out the load with small and
medium sized items.
5
Start the cycle.
• Close the door and press START to begin the
cycle. The dryer will not operate with the door
open. To interrupt the cycle, press pause; press
START to resume the cycle. Press cancel to stop
the cycle.
• If changes to the cycle, temperature, dryness level
or options are attempted after the cycle starts, the
lights will blink and a signal will beep.
• To change the cycle once the cycle has begun,
press cancel and select a new cycle. To change
the temperature, dryness level or options once the
cycle has begun, press pause and make the new
selections.
• To add or remove items when the dryer is running,
open the door. The dryer will stop when the door
is opened. Allow the drum to come to a complete
stop before reaching inside.
• For delicate or very small loads, add two or three
similar items to improve tumbling action.
Select the appropriate cycle and settings for
each load.
4
NOTE
Over-drying can cause wrinkles, shrinkage, lint,
harshness and a build up of static electricity.
• Turn the cycle selector knob in either direction to
select the cycle desired. The indicator for that cycle
will be illuminated.
• Close the door and press START to resume the cycle.
• A signal will sound at the end of the cycle if the
chime option has been selected.
• The estimated drying time for Auto Dry cycles or
the actual drying time for Timed Dry cycles will be
displayed.
• A suitable drying temperature, dryness level and
options will automatically be indicated for the cycle se-
lected. See the “Dryer Settings Chart” for more details.
• To change the drying temperature and dryness
level, press the temp or dry level buttons to scroll
to the desired settings.
• To select or delete an option, press the button for
that option. The indicator will be illuminated when
the option has been selected. The indicator will no
longer be lighted when the option has been deleted.
NOTE
If drying a single large or bulky item, such as a
comforter, remove the item part way through the cycle
and turn it “inside out” to maximize drying effectiveness.
Place item back in dryer and re-start cycle.
6
When the cycle ends, remove items immedi-
ately and hang or fold.
IMPORTANT
Clean the lint filter after every load. CLEAN FILTER
will be displayed at the end of the cycle to remind you
to remove lint from the filter.
NOTE
If a setting is not available for the cycle selected, the
indicator will not light.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
This manual covers many models and not all cycles, options, or features listed are available on every model. Consoles shown
above for reference only. Your model may differ.
Cycle Selection
Turn the cycle selector in either direction to the cycle
desired. The indicator for that cycle will be illuminated.
normal
Select this Auto Dry cycle for cotton items.
To change the cycle once it has begun, press the cancel
button before selecting a new cycle. Just turning the
cycle selector knob to another selection will not change
the cycle.
mixed load
Select this Auto Dry cycle to dry loads containing a mix
of fabrics.
casual
Select this Auto Dry cycle for cottons and blends with a
no-iron finish.
For best results
Follow the fabric care label
instructions on items
to be dried.
delicates
Select this Auto Dry cycle for knits and delicate items.
Timed Dry Cycles
WARNING
Auto Dry Cycles
FIRE HAZARD
Auto Dry cycles take the guesswork out of selecting the
correct drying time for each load. Moisture sensing bars
at the back of the dryer drum sense the moisture level of
the load as it tumbles through the heated air. With Auto
Dry cycles, the load will automatically be dried at the
selected temperature to the desired dryness level.
To avoid fire hazard, do not use heat to dry items
containing feathers or down, foam rubber, plastics
similarly textured, rubber-like materials. Use the Timed
Dry cycle and the Air Dry setting.
quick dry
Select this timed cycle to quickly dry small loads in 25
minutes.
Auto Dry cycles save time and energy and protect fabrics.
When the load has reached the selected dryness level, it
will continue to tumble during a cool down period. This
helps reduce wrinkling and makes items easier to handle
during unloading.
steam refresh
Select this cycle to refresh fabrics, remove odors and
reduce static by injecting the perfect amount of steam
into clothing that has been left in the dryer, stored in
crowded closets, drawers, or unpacked luggage.
Drying time varies depending on size and dampness of
load and fabric type. If the load is too small or almost dry,
the moisture sensing bars may not detect enough moisture
to continue the cycle and the cycle may end after a few
minutes. If this occurs, select a Timed Dry cycle.
time dry
To manually select the drying time for any load, turn
the knob to time dry. Press the dry time button on
the setting panel to scroll through drying times from 15
(touch up) to 90 minutes.
Room temperature and humidity, type of installation and
electrical voltage or gas pressure can also affect drying
time.
heavy duty
Select this Auto Dry cycle to dry durable fabrics such as
jeans and overalls.
bedding
Select this Auto Dry cycle to dry bedding and bulky
items such as comforters, blankets, sleeping bags and
parkas.
towels
“dry time” button
Select this Auto Dry cycle for towels and bath mats.
Because this is not an Auto Dry cycle, you will not be
able to select a dryness level.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
Cycle Settings
high
For best results
Follow the fabric care label
instructions on items
to be dried.
Recommended for most cotton fabrics.
normal
Recommended for wrinkle free, easy care, lightweight
fabrics and bulky loads.
low
Recommended for delicate fabrics.
air dry
Appropriate drying Temperature, Dryness Level and
Options will automatically be displayed for each cycle.
The settings can be changed before the cycle is started.
This setting (no heat) should only be used with a Timed
Dry cycle to dry items containing feathers, down, foam
rubber, plastics or rubber-like materials; to refresh
clothing, stuffed animal, pillows or blankets; and to
To return to factory
settings, press these
two buttons at the
same time and
dust draperies
.
hold until the signal
sounds.
Dryness Level (Auto Dry)
To change the preset level, press the dry level button to
scroll to the degree of dryness desired.
To protect your fabrics, not all dryness levels are available
with every cycle. If a dry level is not appropriate for the
cycle, it cannot be selected.
NOTE
The dry level selected for the cycle will be remembered
and recalled each time that cycle is selected in the future.
To change settings after the cycle starts, press pause,
adjust the setting and press START to resume the cycle.
Select the normal dry level for most Auto Dry cycles.
Occasionally a load may seem too damp or over-dried at
the end of the cycle. To increase drying time for similar
loads in the future, select more. For loads requiring less
drying time, select less.
Drying Temperature
To change the preset temperature, press the temp
button to scroll to the desired setting.
To protect your fabrics, not all temperatures are available
with every cycle.
Select damp for items you wish to partially dry before
hanging or ironing.
The temperature selected for the cycle will be remembered
and recalled each time that cycle is selected in the future.
sanitize
Recommended for durable fabrics and towels. Use this
selection to remove harmful bacteria from your clothing
or other items where sanitization is desired.
NOTE
Only sanitizing cycles have been designed to meet the
requirements of NSF P154 protocol for sanitization
efficacy.
NSF Protocol P154
Sanitization Performance of
Residential Clothes Dryers
This option will kill 99.9% of bacteria with no carryover
of bacteria between loads. A higher temperature is
required. Please check fabric care labels to prevent
damage.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
Cycle Options
To add options, press the corresponding options buttons
to illuminate the selections desired. To delete options,
press the options buttons again and the indicator lights
will turn off. Some options require a “Press & Hold” effort
to activate or deactivate the secondary function.
line dry
Select this option to simulate hanging your laundry in
a summer breeze combined with the wrinkle-releasing
benefits of tumble action. Since drying times are
calculated with the dryer’s automatic moisture sensors
and heat is radically reduced or eliminated, cycle time
will be lengthened. As a result, depending on moisture
content of load, overall energy consumption decreases.
Available on mixed load, normal, casual, and
delicates.
Not all options are available on every model. To protect
your fabrics, not all options are available with every cycle.
If an option is not appropriate for the cycle, the indicator
will not light. Occasionally, a setting and option in the
same cycle will conflict with each other, like sanitize
temp and damp dry level. When this happens, the option
selected first will cause the conflicting option to not be
selectable.
delay start
Press delay start to select a drying time convenient
to your schedule or during off peak energy hours.
The delay time selected will be displayed and begin
counting down when you select START.
NOTE
To change the options after the cycle starts, press pause,
adjust the setting and press START to resume the cycle.
NOTE
While counting down during delay start, you will notice
your dryer periodically tumbling for a few minutes without
heat to redistribute the load, maximizing load freshness.
energy saver
The energy saver option reduces the drying temperature
a few degrees to save energy. In conjunction with
automatic moisture sensors, cycle times will increase
slightly, but overall energy usage will decrease.
chime (press & hold)
A signal will sound at the end of the cycle (and periodically
during wrinkle release) if this option is selected.
add steam
The add steam option injects steam into the clothing
prior to cool down to reduce wrinkling.
anti static
The anti static option injects steam into the clothing
just before cycle completion to reduce static.
wrinkle release
Select wrinkle release if the dried load might not
be removed promptly at the end of the cycle. The dry
load will continue tumbling without heat to help reduce
wrinkling. When chime is selected, a beep will be
heard periodically. The load may be removed any time
during wrinkle release.
control lock
To lock the controls between cycles, press and hold the
control lock button for 5 seconds. Repeat to unlock
the controls when you are ready to operate the dryer.
Use this feature to reduce the likelihood of accidental
operation by children.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
Other Features
Drying Rack (on select models)
rear
support
Use the drying rack for items which should not be tumble
dried. Insert the rack into the dryer drum, resting the
back support on the moisture sensor bars and the front
legs on the air grill.
front
legs
Place items to be dried on top of the rack, leaving space
between items and not allowing them to hang over the
sides or through the holes. The weight should not exceed
10 lbs (4.5 kg). Select the air (no heat) setting for items
containing plastic, foam rubber, rubber-like materials,
feathers or down.
moisture sens-
ing bars
When items are dry, remove the rack and store it in a
convenient location.
NOTE
If your model did not come supplied from the factory
with a drying rack you may order one.
Status Display
The estimated total cycle time will be displayed when the
cycle is selected. The estimated remaining cycle time is
displayed during the cycle.
STATUS DISPLAY
Drum Light
The following will also be displayed at the
appropriate times during the cycle:
The drum light will come on whenever the door is opened
to illuminate the drum during loading and unloading.
Closing the door turns off the light.
DRYING
SANITIZING
COOLING
WRINKLE REL.
CYCLE COMPLETE
CLEAN FILTER
Reversible Door
Your dryer is equipped with a reversible door. The door
can be hinged on the right or left side.
ADDING STEAM
NOTE
For step-by-step instructions on DOOR REVERSAL, refer
to the Installation Instructions supplied with this dryer.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
Dryer Settings Chart
These Temperatures, Dryness Levels and Options are available with the following cycles:
temp
sanitize
9
9
9
9
9
9
9
9
9
9
9
high
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
normal
low
9
9
9
9
air dry
dry level
max
9
9
9
9
9
9
9
9
9
9
9
9
9
high
9
9
9
9
9
9
9
9
9
9
9
9
normal
low
damp
options
energy saver
add steam
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
wrinkle release
line dry
9
9
9
9
delay start
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
press & hold chime
anti static
control lock
9
9
9
9
9
9
9 = Available selections.
= Cycle defaults.
= Non-modifiable presets.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND CLEANING
WARNING
WARNING
FIRE HAZARD
To reduce risk of fire or serious injury to persons or
property, comply with the basic warnings listed in the
Important Safety Instructions and those listed below.
A clothes dryer produces combustible lint. The
dryer must be connected to an outdoors exhaust.
Regularly inspect the outdoor exhaust opening
and remove any accumulation of lint around the
opening and in the surrounding area.
•
•
Before cleaning the dryer interior, unplug the electrical
power cord to avoid electrical shock hazards.
Do not use any type spray cleanser when cleaning the
dryer interior. Hazardous fumes or electrical shock could
occur.
INSIDE
•
Clean the lint filter after every load. Lint build-up on the
filter restricts air flow, which causes longer drying times.
The filter is located at the bottom of the door open-
ing. Remove by pulling straight up. Remove the lint and
replace the filter.
•
Occasionally a waxy build-up may form on the lint filter
and/or moisture sensing bars from using dryer-added
fabric softener sheets. To remove this build-up, wash
them with warm, soapy water. Dry the filter thoroughly
and replace. Do not operate the dryer without the lint
filter in place.
IMPORTANT
Clean the lint filter after every load.
•
•
If the dryer drum becomes stained from noncolorfast
fabrics, clean the drum with a damp cloth and a mild liq-
uid household cleanser. Remove cleanser residue before
drying the next load.
Every 18 months an authorized servicer should clean the
dryer cabinet interior and exhaust duct. These areas can
collect lint and dust over time. An excessive amount of lint
build-up could result in inefficient drying and possible fire
hazard.
OUTSIDE
•
Clean the cabinet with mild soap and water. Never use
harsh, gritty or abrasive cleansers.
•
If the cabinet becomes stained, clean with diluted chlo-
rine bleach (1 part bleach to 8 parts water). Rinse several
times with clear water.
•
Remove glue residue from tape or labels with a mixture
of warm water and mild detergent. Or, touch residue with
the sticky side of the tape or label.
•
•
When cleaning chrome parts use a window cleaner with
ammonia or mild soap and water.
Before moving the dryer, place a strip of cardboard or
thin fiberboard under the front leveling legs to prevent
damage to the floor.
IMPORTANT
Do not store or place laundry products on top of
dryer at any time. They can damage the finish or
controls.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
SOLUTIONS TO COMMON PROBLEMS
Common Drying Problems
Many drying problems involve poor cleaning results, poor soil and stain removal, residues of lint and scum, and fabric
damage. For satisfactory drying results, follow these suggestions provided by The Soap and Detergent Association.
PROBLEM
POSSIBLE CAUSES
SOLUTIONS
PREVENTIVE MEASURES
Greasy, oily
stains
• Fabric softener sheet.
• Rub fabric softener stains with
bar soap. Rinse and rewash.
• Add a few bath towels to small loads
for proper tumbling.
• Some “silk-like” fabrics should be air
dried.
• Use proper drying temperature.
• Place fabric softener sheet on top of
load before starting the dryer.
Lint
• Overloading.
• Overdrying causes static
electricity.
• Reduce load size and rewash
using liquid fabric softener in the • Use fabric softener in washer or dryer
final rinse.
• Do not overload dryer.
to reduce static electricity.
• Lint screen not clean when
cycle began.
• Lint is attached to “pills.”
• Or, add a fabric softener sheet
and tumble without heat.
• Use lint brush or roller to remove • Check that lint filter is clean and in
• Remove items when they are slightly
damp to avoid overdrying.
lint.
place.
Pilling
• Overdrying.
• Use a lint brush or shaver to
remove pills.
• Use fabric softener to lubricate fibers.
• When ironing, use spray starch or
fabric finish on collars and cuffs.
• Turn items inside out to reduce
abrasion.
(Fibers break
off, ball up and
cling to fabric.)
Shrinking
Wrinkling
• Temperature too high.
• Overdrying.
• Irreversible condition.
• Follow fabric care label directions.
• If shrinking is a concern, check load
often.
• Remove items while slightly damp and
hang or lay flat to complete drying.
• Block knits into shape.
• Overloading.
• Leaving items in dryer after
cycle ends.
• Reduce load size and tumble at
medium or low heat for 5-10
minutes.
• Do not overload dryer.
• Remove items as soon as cycle ends.
• Remove items immediately. Hang
or fold.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SOLUTIONS TO COMMON PROBLEMS
Avoid Service Checklist
Before calling for service, review this list. It may save both time and expense. The list includes common occurrences
that are not the result of defective workmanship or materials in this dryer.
OCCURRENCE
POSSIBLE CAUSE
SOLUTION
Dryer does not start.
Electrical power cord is not securely plugged in or plug Make sure the plug fits tightly in wall outlet.
may be loose.
House fuse blown or circuit breaker tripped.
Reset circuit breaker or replace fuse.
Make sure electrical line is not overloaded and the dryer is on
a separate circuit.
Thermal limiter tripped.
Call authorized service person for replacement.
Dryer runs but won’t
heat.
There are 2 house fuses in the dryer circuit. If 1 of the 2 Replace fuse.
fuses is blown, the drum may turn but the heater will not
operate. (electric models)
Gas supply valve is not open (gas models).
Check to make sure supply valve is open. See INSTALLATION
INSTRUCTIONS for procedure.
Dryer does not have enough air supply to support the
See INSTALLATION INSTRUCTIONS.
burner flame (gas models).
LP gas supply tank is empty or there has been a utility Refill or replace tank.
interruption of natural gas (gas models).
Dryer should heat when utility service is restored.
Drying cycle takes too
long, outside of the
dryer feels too hot or
smells hot.
Lint filter is clogged with lint.
Make sure all lint has been removed from the dryer lint filter
before starting each cycle.
Exhaust duct requirements have not been met.
Exhaust duct must be at least 4 inches in diameter and made
of rigid or semi-rigid metal.
When in place, the duct must have no more than four 90°
bends and must not exceed length listed in INSTALLATION
INSTRUCTIONS.
Electric dryer is connected to a 208 volt circuit.
Drying procedures have not been followed.
Drying time will be 20% longer than drying on a 240 volt
circuit.
See “Operating Instructions.”
Outside exhaust hood or exhaust duct may be clogged Clean out any obstruction.
or restricted.
High humidity.
Use a dehumidifier near the dryer.
Do not overload. See “Operating Instructions.”
Remove items as soon as cycle ends.
See “Operating Instructions.”
Excessive wrinkling.
Dryer is overloaded.
Items left in dryer too long.
Insufficient sorting of items.
Drying temperature too high.
Follow fabric care label instructions.
Scratching or chipping
of the drum finish.
Foreign objects such as coins, pins, clips or buttons
are inside the dryer.*
Always remove foreign objects from pockets before launder-
ing. Remove objects from drum and restart dryer.
Permanently attached items such as belt buckles,
zippers and fasteners may be hitting the inside of
the drum.*
It may be necessary to sew a scrap of material securely
around ornaments before drying to prevent scratching and
damage to the dryer.
*Drum damage caused by foreign objects or permanently attached items is not covered by the warranty.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
MAJOR APPLIANCE WARRANTY INFORMATION
For the applicable warranty period as set forth below, as measured from your original date of purchase, Electrolux will repair or
replace any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used
and maintained in accordance with the provided instructions.
Warranty Periods:
• All parts — One year including labor
• Wash tub — Functional life of the product (excluding labor)
• Wash tub drive motor, non-cosmetic defects — Ten years (excluding labor)
Exclusions
This warranty does not cover the following:
1. Products with original serial numbers that have been removed, altered or cannot be readily determined.
2. Product that has been transferred from its original owner to another party or removed outside the USA or Canada.
3. Rust on the interior or exterior of the unit.
4. Products purchased “as-is” are not covered by this warranty.
5. Food loss due to any refrigerator or freezer failures.
6. Products used in a commercial setting.
7. Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances not in ordinary
household use or used other than in accordance with the provided instructions.
8. Service calls to correct the installation of your appliance or to instruct you how to use your appliance.
9. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves, etc., which are not a
part of the appliance when it is shipped from the factory.
10. Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumables, or knobs, handles, or other
cosmetic parts.
11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage
expense for service calls to remote areas, including the state of Alaska.
12. Damages to the finish of appliance or home incurred during installation, including but not limited to floors, cabinets, walls, etc.
13. Damages caused by: services performed by unauthorized service companies; use of parts other than genuine Electrolux
parts or parts obtained from persons other than authorized service companies; or external causes such as abuse, misuse,
inadequate power supply, accidents, fires, or acts of God.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR OR REPLACEMENT
AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT
NOT LESS THAN ONE YEAR. ELECTROLUX SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS
PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN LIMITED WARRANTY OR
ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR
EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE
OTHER RIGHTS THAT VARY FROM STATE TO STATE.
IF YOU NEED SERVICE
Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period should service be
required. If service is performed, it is in your best interest to obtain and keep all receipts. Service under this warranty must be
obtained by contacting Electrolux at the addresses or phone numbers below.
This warranty only applies in the USA and Canada. In the USA, your appliance is warranted by Electrolux Major Appliances North
America, a division of Electrolux Home Products, Inc. In Canada, your appliance is warranted by Electrolux Canada Corp. Electrolux
authorizes no person to change or add to any obligations under this warranty. Obligations for service and parts under this warranty
must be performed by Electrolux or an authorized service company. Product features or specifications as described or illustrated are
subject to change without notice.
USA
Canada
1.800.265.8352
Electrolux Canada Corp.
5855 Terry Fox Way
Mississauga, Ontario, Canada
L5V 3E4
1.800.944.9044
Electrolux Major Appliances
10200 David Taylor Drive
Charlotte, NC 28262
17
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
18
Download from Www.Somanuals.com. All Manuals Search And Download.
|