Frigidaire Burner Side Burner User Manual

Frigidaire Side Burner  
Built-In Usage  
USE AND CARE MANUAL  
FOR OUTDOOR USE ONLY  
MADE IN THE USA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Instructions  
The Frigidaire side burner is designed to be installed as a built-in side burner, in conjunction with  
a Frigidaire & Frigidaire Gallery grills. If installed as a built-in Grill, the Grill surround must be  
constructed of Non-combustible material.  
PLANNING AND DESIGN  
Start by identifying the number and size of components you want to include in your outdoor cooking  
center. Countertops must be constructed of non-combustible, outdoor-safe materials. Consider out-  
door lighting to illuminate after-dark grilling. For assistance in designing and building your outdoor  
cooking center, contact a landscape architect or general contractor. Review the drawings on the following  
pages to determine the exact dimensions and items needed for an outdoor cooking center. Keep in mind  
that the gas line hook-up is on the right hand side of the main built in-grill. The structure, grill and support  
items must be kept level throughout the installation to ensure proper operation.  
LOCATION  
Take into account convenience and visual impact as well as traffic flow, wind exposure, and the  
site’s structural suitability. The grill should never be placed in an enclosed area without an approved  
ventilation system, or beneath a combustible overhang. Because the grill exhausts to the rear, it  
should never be located in front of a window or less than 12” from hard-to-clean surfaces. We rec-  
ommend keeping your gas supply lines as short as possible for best performance. To ensure a per-  
fect fit, we strongly recommend that you have all components on hand prior to final construction.  
CLEARANCE TO NON-COMBUSTIBLE CONSTRUCTION  
For your safety a minimum of 3” clearance from the back of the grill to non-combustible construction  
is required. You should allow at least 6” side clearance to non-combustible construction. The side  
vents on this unit can be covered for built in installations without danger of fire or without impairing  
the operation of the grill.  
UTILITIES  
For natural gas grills, consult your local gas utility company for hook-up requirements. All gas connections  
should be made by a certified technician or a gas supply company. For natural gas installation, the supply  
line must be at least 1/2” diameter. The rotisserie requires a 110/120 volt electric supply and GFI  
receptacle. (6.5 amp min.) that should be installed by a qualified electrical technician. If your plan  
includes a sink, arrange for a certified plumbing technician to run a water line to the site.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Instructions  
Additional Requirements:  
• If using a backsplash apron or rear wall, locate electrical service on the left hand side for rotisserie motor construc-  
tion.  
• A minimum clearance of 12” from the back of the outdoor cooking center must be maintained between the grill and  
any combustible construction such as wood siding of residence, 3” minimum for non-combustible construction.  
• The side vents on this unit can be covered for built in installations without danger of fire or without impairing the  
operation of the grill.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Natural Gas Installation  
1. Under the grill, remove the NG gas regulator  
assembly from the main gas pipe. Once the  
NG gas regulator is removed, the main gas  
pipe will be showing under grill. (See Fig 1)  
Fig. 1  
2. Using pipe sealant, attach the “T” Fitting to  
the main gas pipe coming out of the bottom of  
the grill. (See Fig 2)  
3. Using pipe sealant, attach a 3/8” flared fitting  
to the side of the “T” fitting. (See Fig 3)  
4. Attach the one end of the flex line to the fitting  
on the side of the “T” fitting. Connect the other  
end of the flex line to the side burner valve.  
(See Fig 4)  
Fig. 2  
Note: This line can be extended using a 3/8”  
flared coupling and an additional flex line if  
necessary.  
5. Using pipe sealant, attach a 3/8” nipple to the  
bottom of the “T” fitting. (See Fig 5)  
6. Using pipe sealant, attach the NG gas regulator  
to the 3/8” nipple. (See Fig 6)  
Fig. 3  
7. Attach the NG gas line to the bottom flared  
fitting. (See Fig 7)  
Note: Make sure all fittings are tightened with  
a wrench.  
Fig.6  
Fig. 4  
Fig.7  
Fig. 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LP Side Burner Conversion  
Underside of  
right side  
burner shelf  
1. Loosen the flex line attached to the side burn-  
er valve using an adjustable wrench. (See Fig.  
1)  
Fig 1  
2. Remove the flex line completely from the side  
burner valve. (See Fig. 2)  
Flex Line  
3. Remove the control knob from the front of the  
side burner. (See Fig. 3)  
Valve Assembly  
4. Remove the screw holding the bezel in place  
on the side burner and remove bezel from  
front of side burner. (See Fig. 4)  
Fig 2  
5. Grasp and remove NG valve assembly from  
the side burner tube assembly and remove  
from the side burner. (See Fig. 5)  
Flex Line  
6. Install LP valve assembly into the side burner.  
(See Fig. 6)  
Fig 3  
Bezel  
Screw  
Fig 4  
Fig 5  
Fig 6  
LP valve  
Assembly  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LP Side Burner Conversion  
7. Reattach bezel and screw new LP valve onto  
front of side burner. (See Fig 4, again)  
8. Reattach the flex line to the LP valve assem-  
bly and tighten securely. (See Fig. 7  
Fig 7  
9. Reattach the control knob onto the manifold  
stem. (See Fig. 3, again)  
Flex line  
attached  
10. Looking down at top of side burner, use a  
Top of Side Burner  
Looking down  
7mm nut driver to remove the NG. (See Fig.  
8)  
Fig 8  
16. Install the new LP orifice (See Fig. 9)  
NG orifice  
17. From the bottom of the side burner place the  
LP orifice into the main burner assembly, fin-  
ger tighten. (See Fig. 10)  
18. Using the 7mm nut driver tighten the LP  
orifice in the main burner assembly.  
(See Fig. 11)  
LP orifice  
Fig 9  
19. This completes the side burner conversion.  
Bottom of side  
burner main  
assembly  
Fig 10  
LP orifice  
Nut driver through  
top of side burner  
Fig 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LP Grill Conversion  
IMPORTANT: Make sure you have converted  
the side burner to Liquid Propane prior to  
completing the following steps.  
LP hose/  
regulator  
supplied  
with grill.  
1. Remove the LP gas hose assembly from the  
flare fitting. (this has the regulator attached to  
it.) (See Fig. 12)  
Fig. 12  
2. Using an adjustable wrench remove the  
flare fitting coming out of the bottom of the  
grill.Once the flare fitting is removed the main  
gas pipe will be showing under grill. (See Fig. 13)  
4. Using pipe sealant, attach the “T” Fitting to the  
main gas pipe coming out of the bottom of the  
grill and tighten with a wrench. (See Fig. 14)  
Fig. 13  
5. Using pipe sealant, attach a 3/8” flared fitting to  
the side and bottom of the “T” fitting. (See Fig.  
15)  
Main Gas Pipe  
6. Attach the Flex Line to the fitting on the side of  
the “T” fitting. Connect the other end of the flex  
line to the side burner valve. (See Fig. 16)  
Fig. 14  
Note: This line can be extended using a 3/8”  
flared coupling and an additional flex line if  
necessary.  
7. Attach the LP gas hose assembly to the  
bottom flared fitting. (See Fig. 17)  
Fig. 15  
Be sure your L.P. cylinder has an overfill  
protection device on it. Max inlet pressure  
cannot exceed 10”-11” water column.  
“T” fitting  
Flex Line  
Attach to fitting  
Fig.17  
Fig. 16  
Gas Hose  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Instructions  
Tools Required: Adjustable wrench, flat head screwdriver and a 1/4” socket wrench  
Please use the built in information on the following pages for the exact dimensions needed to fit the  
side burner into the structure. Once installed into the structure use the following steps to complete  
the side burner installation.  
INSTALLATION OF SIDE BURNER PARTS  
1. Install burner into side burner tray lining up the three  
cutouts on the underside of the burner. (See Fig. 1)  
2. Install burner cap onto burner (See Fig. 2)  
3. Install grate into burner. (See Fig. 3)  
Fig. 1  
Fig. 2  
Fig. 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Lighting The Side Burner  
LEAK TESTING  
Make sure all burners are turned to “OFF”.  
Turn on the gas at the cylinder (LP models) or main  
valve (Natural models). DO NOT turn on the side  
burner. Perform a leak test at all connections and fit-  
tings by spraying a 50/50 solution of water and soap.  
If any bubbles appear, correct the leak before  
attempting to light the grill or side burner.  
LIGHTING INSTRUCTIONS  
Push and turn the control knob to the “HIGH”position  
and immediately press and hold the electronic igniter  
button. You’ll hear a snapping sound. It may be nec-  
essary to hold the electronic starter button for about 4  
seconds. If the burner does not light in 4 seconds,  
turn the knob to the “OFF” position and wait 5 min-  
utes before trying again. Repeat above steps to light  
remaining burners. (See Fig. 5)  
Fig. 5  
Match Lighting  
If by chance the electronic igniter does not light the  
burner, the burner may be lit with a match. Keep  
your face as far away from the burner as possible  
and place a lit, long stem match through the spaces  
in the grate to the ports of the burner. Position the  
match near the burner ports and push and turn the  
control knob to the “HIGH”position.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty  
LIMITED LIFETIME WARRANTY  
Electrolux Icon Grills have a limited lifetime warranty on all stainless steel panels, a limited 3 year warranty on  
stainless steel burners, including labor within one year of the date of purchase; and a limited 1 year warranty  
on all other parts, labor included.  
In the U.S.A., your appliance is warranted by Electrolux Home Products North America. We authorize no person to change or add  
to any of our obligations under this warranty. Our obligations for service and parts under this warranty must be performed by an  
authorized Electrolux Home Products North America qualified service technician.  
WARRANTY  
PERIOD:  
THROUGH OUR AUTHORIZED SERVICERS,  
WE WILL:  
THE CONSUMER WILL BE RESPONSIBLE FOR:  
LIMITED ONE YEAR  
WARRANTY *  
One Year from  
original purchase  
date  
Pay all costs for repairing or replacing any parts  
of this appliance which prove to be defective in  
materials or workmanship.  
Cost of service calls that are listed under NORMAL  
RESPONSIBILITIES OF THE CONSUMER.  
LIMITED 3 YEAR  
WARRANTY ON  
STAINLESS STEEL  
BURNERS *  
2nd through 3rd  
years from original  
purchase date  
Provide a replacement for any defective stainless  
steel burner which prove to be defective in  
materials or workmanship.  
Diagnostic and any transportation and labor costs  
which are required because of service.  
LIMITED LIFETIME  
WARRANTY ON  
STAINLESS PANELS *  
From original date  
of purchase  
All of the provisions of the full and limited warranties  
above and the exclusions listed below apply.  
Costs of the technicians travel to the home and any  
costs for pick up and delivery of the appliance required  
because of service.  
* Some restrictions apply  
This warranty applies only to products in ordinary household use, and the consumer is responsible for the items  
listed below:  
1. Proper use of the appliance in accordance with instructions provided with the product.  
2. Proper installation by an authorized servicer in accordance with instructions provided with the appliance  
and in accordance with all local plumbing, electrical and/or gas codes.  
NORMAL  
RESPONSIBILITIES  
OF THE CUSTOMER  
3. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves,etc.,which  
are not a part of the appliance when it was shipped from the factory.  
4. Damages to finish after installation.  
This warranty does not cover the following:  
EXCLUSIONS  
1. CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES  
RESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY.  
NOTE: Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation  
or exclusion may not apply to you.  
2. Service calls which do not involve malfunction or defects in workmanship or material, or for appliances not in ordinary  
household use. The consumer shall pay for such service calls.  
3. Damages caused by services performed by servicers other than Electrolux Home Products North America or its authorized  
servicers; use of parts other than genuine Electrolux Home Products parts or parts obtained from persons other than  
authorized servicers; or external causes such as abuse, misuse, inadequate power supply or acts of God.  
4. Products with original serial numbers that have been removed or altered and cannot be readily determined.  
5. All other warranties, including implied warranties of merchantability and fitness for a particular purpose, which are expressly  
excluded. consequential or incidental damages resulting from breach of warranty which are expressly excluded.  
6. This limited warranty does not cover corrosion or discoloring due to lack of maintenance, misuse, hostile environments,  
alterations, accidents or abuse or neglect.  
7. This limited warranty does not cover any scratches, dents, corrosion or discoloring by heat, abrasive and chemical cleaners  
nor any components used in the installation of the appliance.  
Keep your bill of sale, delivery slip, or some other appropriate payment record. The date on the bill establishes the warranty  
period should service be required. If service is performed, it is in your best interest to obtain and keep all receipts. This  
written warranty gives you specific legal rights. You may also have other rights that vary from state to state. Service  
under this warranty must be obtained by contacting Electrolux Home Products.  
IF YOU NEED  
SERVICE  
This warranty only applies in the 50 states of the U.S.A., Puerto Rico, and Canada. Product features or specifications as  
described or illustrated are subject to change without notice. In the U.S. A., all warranties are made by Electrolux Home  
Products North America. In Canada, your appliance is warranted by Electrolux Canada Corp.  
If you have any other questions, please contact the Customer Service Hotline at  
1-800-320-0859  
Because of continuing product improvement, these specifications are subject to change without notice  
RMP-122-FSSBIM  
01/18/05  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Crate Amplifiers Musical Instrument KXB15 User Manual
Crate Amplifiers Portable Speaker PSM6P User Manual
Cypress Computer Hardware CY62148EV30 User Manual
Digicom Network Router ADSL Router User Manual
DMP Electronics Smoke Alarm XR2500F User Manual
Dymo Label Maker LT 100T User Manual
Edelbrock Automobile Parts 1403 User Manual
Electro Voice Microphone RE16 User Manual
Electro Voice Portable Speaker PI100 User Manual
EverFocus Computer Hardware ENVS1600 User Manual