Grow-With-Me Trike
Model Number: 72667
Instructions
Please keep these instructions for future reference.
Adult assembly is required.
Tools needed for assembly: Hammer, Phillips Screwdriver, Scrap Block of Wood.
If you have any questions about this product, or are missing a part, please call us toll-free
at 1-800-432-KIDS, rather than return this product to the store.
Age: 2 - 6 years.
Weight Limit: 60 lbs.
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts
• Please save all packaging material until assembly is complete to ensure that no parts are discarded.
• If you are missing a part, please call us toll-free at 1-800-432-KIDS, rather than return this product to the store.
• Please wipe each part with a clean, dry cloth before assembly.
11
9
10
12
14
6
7
13
13
7
3
8
15
5
16
5
2
4
4
1
17
2
Illustration
Number
Illustration
Number
Part Description
Quantity
Part Description
Quantity
11
12
13
14
15
16
17
18
19
Seat
1
1
2
1
2
2
1
1
4
1
1
2
3
4
5
6
7
8
9
Front Wheel
Pedal Hub
Pedal Axle
Pedal
Lock Washer
Fork
Pedal Axle Cover
Frame
Handlebar
Gas Cap
1
4
1
2
2
1
2
1
1
1
Seat Retainer
Rear Wheel
Straight Axle
Hubcap
Cap Nut
Cap Nut Assembly Tool
#8 x 3" Screw
3
4
/
#8 x " Screw
Label Sheet (not shown)
10
18
3
#8 x 3" Screw – 1
16
19
4
#8 x / " Screw – 4
Cap Nut – 2
5
Lock Washer – 2
(ALL SHOWN ACTUAL SIZE)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
1
3
Frame
Axle Hole
Axle Hole
Straight Axle
Straight Axle
Cap Nut
• Turn the frame upside down.
• Insert the straight axle through the axle holes in the rear of
the frame.
Cap Nut
Assembly Tool
4
Indented
Cap Nut
Hubcap
Side Up
• Place a scrap block of wood on a flat surface.
• Fit a cap nut into the cap nut assembly tool.
• Place one end of the straight axle into the cap nut.
Rear Wheel
• Tap the end of the straight axle with a hammer. Make sure
the cap nut is securely attached to the straight axle.
Straight Axle
Frame
• Remove the cap nut assembly tool from the cap nut.
2
Straight Axle
Rear Wheel
Assembled Rear
Wheel
Cap Nut
Assembly Tool
• Place a scrap block of wood on a flat surface.
• Turn the frame on its side with the exposed end of the
straight axle up.
• Place the cap nut assembly tool under the assembled rear
wheel and onto the cap nut.
• Slide a rear wheel (indented side up) onto the end of the
straight axle.
Hubcap
Indented
Side Down
• Slide a hubcap (peg side down) onto the straight axle.
• Place a cap nut on the end of the straight axle.
• Tap the cap nut with a hammer. Make sure the cap nut is
securely attached to the straight axle.
• Slide a hubcap (peg side up) onto the straight axle.
• Slide a rear wheel (indented side down) onto the
straight axle.
• Dispose of the cap nut assembly tool properly.
• Set the frame assembly aside.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
9
5
Pedal Hub
Metal Tab
Pedal Hubs
Pedal Axle
Metal Tab
Pedal Hub
Slot
• Push the pedal hubs in until they are flush with the surface
of the front wheel.
• Place two pedal hubs on the pedal axle so that the metal
tabs on the pedal axle fit into the slots inside each pedal hub.
10
Lock Washer
6
Pedal Hubs
Raised Tabs
Pedal Axle
Pedal Slot
Front Wheel
Rectangular Hole
Closed End
• While holding the pedal hubs on the pedal axle, insert the
assembly into the rectangular hole in the front wheel.
• Insert a lock washer into the pedal slot. Make sure the
raised tabs on the lock washer are facing the closed or
outside end of the pedal.
7
Pedal Hubs
• Insert the other lock washer into the other pedal.
11
Lock Washer
(Inside Pedal)
Pedal
• Push the pedal hubs in until they are flush with the surface
of the front wheel.
Pedal Axle
8
Pedal Hub
Pedal Axle
Pedal Hub
• Place a scrap block of wood under the front wheel assembly.
• Fit a pedal on the pedal axle.
• Turn the front wheel assembly over.
• With the lock washer centered over the pedal axle end, tap
the pedal with a hammer until it is secure.
• Insert a pedal hub on top of the pedal axle and into the
rectangular hole in the front wheel.
• Repeat this procedure to attach the other pedal to the other
end of the pedal axle.
• Insert the remaining pedal hub below the pedal axle and
into the rectangular hole in the front wheel.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
12
14
Fork Arms
Gas Cap
Pedal Axle Cover
Groove
3
Pedal Axle
4
#8 x / " Screw – 4
SHOWN ACTUAL SIZE
• Place the front wheel assembly between the fork arms so
that the pedal axle fits into the groove at the bottom of
each fork arm.
• Insert and snap the gas cap into the hole in the frame.
• Place a pedal axle cover over the pedal axle on one
fork arm.
15
3
Seat Retainer
4
• Insert two #8 x / " screws into the pedal axle cover and
tighten with a Phillips screwdriver. Do not over-tighten.
• Repeat this procedure to attach the other pedal axle cover
to the other fork arm.
Seat
13
Peg
Handlebar
Holes
Frame Neck
Fork Post
• Position the seat upside down.
• Fit the small pegs on the seat retainer into the holes in
the seat.
Pedal Axle Cover
One-time assembly is now complete.
#8 x 3" Screw – 1
SHOWN ACTUAL SIZE
• Turn the frame upright.
• Insert the fork post up through the hole in the neck of the
frame. Make sure the fork is positioned so that the pedal
axle covers face the rear wheels.
• Place the handlebar over the fork post and push it down
onto the frame. Make sure the handlebar is positioned so
that the screw hole faces the rear wheels and aligns with
the screw hole in the fork post.
Helpful Hint: You may need to rotate the handlebar to align
the holes.
• Insert the #8 x 3" screw into the hole and tighten with a
Phillips screwdriver. Do not over-tighten.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching the Seat
Label Decoration
Helpful Hint: The seat can be attached to the frame in any
of three positions, depending on the size of your child.
Check your child’s fit on the Grow-With-Me Trike by observ-
ing the seat to pedal distance, as it is being ridden. If the
pedals seem too far away or too close for your child, move
the seat up or down.
1
2
5
4
Seat
Tabs
Seat
Retainer
3
6
6
Proper label application will help to keep the labels looking
their best!
• Wash your hands before applying the labels.
Slots
• Make sure the areas where the labels will be applied are
clean and dry. Wipe your vehicle with a clean, soft, dry
cloth to remove any dust or oils.
• For best results, avoid applying a label more than once.
• Apply the labels as shown in the illustration above.
• After applying a label, rub the label firmly with a cloth to
make sure the label is adhered to your vehicle.
Middle Position
Lower Position
Upper Position
• At an angle, insert the tabs on the seat into any of the top
three sets of slots for the lower, middle or upper position.
• Lower the seat so that the seat retainer inserts and snaps
into the slots in the frame.
• Pull up on the seat to be sure it is secure.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the Seat
Maintenance
• Check the plastic parts regularly and if broken or cracked,
dispose of them properly.
Seat
• Check all fasteners regularly to be sure they are tight. If
the fasteners are not tight, tighten them as necessary.
• To clean the Grow-With-Me Trike, use a mild soap and
water solution and a clean cloth. Rinse clean with water to
remove soap residue.
Seat Retainer Tab
Frame
Seat Retainer Tab
• Turn the frame on it’s side.
• Squeeze the seat retainer tabs toward one another and lift
the seat from the frame.
If you have any questions about this product:
In Canada, call 1-800-567-7724, or write to: Mattel Canada Inc, 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
In Great Britain, telephone 01628 500302.
In Australia, Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1-800-800-812
(valid only in Australia).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
|