Please read this manual and save it with your original sales receipt.
Tools needed for assembly: Phillips Screwdriver, Adjustable Wrench
(or Pliers), Hammer, and Safety Scissors (all not included).
Use only with a Power Wheels® 6 Volt Rechargeable Battery with
built in thermal fuse and a Power Wheels® Super 6 Volt with
A-style connector (both included).
Product features may vary
from the picture above.
Owner's Manual
with Assembly Instructions
For Model P8990
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT INFORMATION
ELECTRICAL HAZARD
DANGER
• To reduce the risk of fire or electric shock, carefully follow these instructions. To prevent electric
shock, do not immerse in water; wipe clean with a damp cloth.
WARNING
• Battery can fall out and injure a child if vehicle tips over. Always use battery retainer.
• PREVENT FIRE
- Never modify the electrical system. Alterations could cause a fire resulting in serious injury
and could also ruin the electrical system.
- Use of the wrong type battery or charger could cause a fire or explosion resulting in
serious injury.
- Use of Power Wheels® components in products other than Power Wheels® vehicles could
cause overheating, fire or explosion.
• The battery must be handled by adults only. The battery is heavy and contains sulfuric acid
(electrolyte). Dropping the battery could result in serious injury.
• Never allow children to charge the battery. Battery charging must be done by adults only.
A child could be injured by the electricity involved in charging the battery.
• Read the safety instructions on the battery.
• Examine the battery, charger and their connectors for excessive wear or damage each time
you charge the battery. If damage or excessive wear is detected, do not use the charger or the
battery until you have replaced the worn or damaged part.
• HOT motors. Handle carefully.
RIDING HAZARD
WARNING
• Prevent Injuries and Deaths
• Direct Adult Supervision Required
• Keep Children Within Safe Riding Areas.
These areas must be:
- away from swimming pools and other bodies of water to prevent drownings
- generally level to prevent tipovers
- away from steps, steep inclines, cars, roads and alleys.
• Riding Rules
Make sure children know and follow these rules for safe driving and riding.
- Always sit on the seat.
- Always wear shoes.
- Only 1 (one) riders at a time.
P8990a-0920
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS
• If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this
product to the store.
• Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded.
• Some parts were placed under the seat for shipment. Press the tab under the back of the seat and lift to access the battery compartment.
• Metal parts have been coated with a lubricant to protect them during shipment. Wipe all metal parts with a paper towel to remove
any excess lubricant.
Handlebar
Vehicle (with Seat)
Back
Front
Handlebar Assembly
Handlebar Neck
Cowling
Grip - 2
Hubcap - 4
Wheel - 4
Rear Wheel Driver - 2
P8990a-0920
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS
.437"
.437 Cap Nut - 5
6 Volt Battery
Foam Spacer
7/16" Washer - 4
6 Volt Charger
Cap Nut
Assembly Tool
#10 Lock Nut - 3
#10 x 3/4" Screw - 1
Steering Bushing
Round Bushing - 2
#6 x 1/2" Screw - 2
#6 x 1" Screw - 6
Steering Column
#10 x 15/8" Screw - 2
For your convenience, we included extra fasteners!
Note: Tighten and loosen all screws with a Phillips
Rear Axle
screwdriver. Do not over-tighten the screws.
Fasteners Shown Actual Size
Part Not Shown: Label Sheet
P8990a-0920
5
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTSPICTURE
Note: Some parts are assembled on both sides of the vehicle. This illustration shows assembly on right side only.
21
21
22
14
20
21
16
12
3
13
19
24
19
8
26
19
15
2
10
25
9
1
11
17
23
23
7
18
4
4
6
6
6
5
5
Parts Not Shown
Label Sheet
10 6 Volt Charger
11 Rear Wheel Driver - 2
12 Grip - 2
13 Handlebar Cover - Front 22 #6 x 1/2" Screw - 2
14 Handlebar Cover - Back 23 7/16" Washer - 4
15 Steering Bushing
16 Handlebar
17 Rear Axle
19 #10 Lock Nut - 3
20 #10 x 15/8" Screw - 2
21 #6 x 1" Screw - 6
1
2
3
4
5
6
7
8
9
Vehicle
Cowling
Seat
Wheel - 4
Hubcap - 4
Cap Nut - 5
Steering Column
Handlebar Neck
6 Volt Battery
24 #10 x 3/4" Screw - 1
25 Cap Nut Assembly Tool
26 Foam Spacer
18 Round Bushing - 2
P8990a-0920
6
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY CHARGING
ELECTRICAL HAZARD
WARNING
CAUTION
• Battery can fall out and injure a child if vehicle
tips over. Always use battery retainer.
Use the charger in dry locations only.
• PREVENT FIRE
- Never modify the electrical system.
Alterations could cause a fire resulting
in serious injury and could also ruin the
electrical system.
- Use of the wrong type battery or charger
could cause a fire or explosion resulting in
serious injury.
- Use of Power Wheels® components in
products other than Power Wheels®
vehicles could cause overheating,
fire or explosion.
• The battery must be handled by adults
only. The battery is heavy and contains
sulfuric acid (electrolyte). Dropping the
battery could result in serious injury.
• Never allow children to charge the battery.
Battery charging must be done by adults
only. A child could be injured by the elec-
tricity involved in charging the battery.
About Thermal Fuses
Your Power Wheels® 6 volt battery is equipped with a built-in
thermal fuse. The thermal fuse is a self-resetting safety device
which automatically “trips” and shuts down operation of the vehicle
if the vehicle is overloaded or the driving conditions too severe.
Once a fuse has “tripped”, remove your foot from the pedal
and wait approximately 25 seconds before operating the vehicle
again. To avoid repeated automatic shut-downs, do not overload
the vehicle by exceeding the 65 lbs (29.5 kg.) maximum weight
capacity or by towing anything behind the vehicle. Avoid severe
driving conditions, such as driving up slopes or running into
fixed objects, which can cause the wheels to stop spinning while
power is still being supplied to the motors and make sure your
child stops the vehicle before switching speeds or direction.
If a thermal fuse in a battery continually trips under normal
driving conditions, please contact your local Power Wheels®
Authorized Service Center. For the location of the Authorized
Service Center nearest to you, visit us on-line at
Important Notes
• Your new battery must be charged for at least 18 hours
• Read the safety instructions on the battery.
before you use it in your vehicle for the first time.
• Examine the battery, charger and their
connectors for excessive wear or damage
each time you charge the battery. If damage
or excessive wear is detected, do not use
the charger or the battery until you have
replaced the worn or damaged part.
• We recommend that you start charging your battery before
beginning assembly of your new vehicle.
• The battery must be upright while charging.
• The charger is not a toy.
• Do not short circuit the battery.
• You do not need to remove the battery from your vehicle to
recharge it.
• Before charging the battery, examine the battery case for cracks
and other damage which may cause sulfuric acid (electrolyte)
to leak during the charging process. If damage is detected,
do not charge the battery or use it in your vehicle. Battery acid
is very corrosive and can cause severe damage to surfaces
it contacts.
• Do not charge the battery on a surface (such as kitchen counter
tops) which could be damaged by the acid contained inside the
battery. Take precautions to protect the surface on which you
charge your battery.
• Use only a Power Wheels® Super 6 Volt charger with (input
120 VAC, 60 Hz with an output of 6 VDC, 1200mA) to charge
your Power Wheels® 6 volt battery.
• Adults Note: Regularly examine the charger for damage to the
cord, plug, housing or other parts that may result in the risk of
fire, electric shock or injury. In the event of any damage, do not
use the charger until the damage has been properly repaired.
Please call 1-800-348-0751.
• If your battery is old and will not accept a charge, do not leave
it in the vehicle. Always remove a dead battery from the vehicle.
P8990a-0920
7
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERYCHARGING
1
• Plug the charger connector into the battery
.
2
• Plug the charger into a standard volt wall outlet
.
Notes:
- If power flow to the wall outlet is controlled by a switch,
make sure the switch is “ON”.
- Use the charger only in a wall outlet. Do not plug the charger
into a ceiling outlet.
2
- The power indicator on the charger does not indicate the charge
status of your battery. The power indicator allows you to see
that there is power from the wall outlet.
• Before first-time use, charge the battery for at least 18 hours.
Never charge the battery longer than 30 hours.
• Recharge the battery for at least 14 hours after each use of
your vehicle. Do not charge the battery longer than 30 hours.
• Once the battery is charged, pull firmly on the charger
connector to disconnect it from the battery. Unplug the charger
from the wall outlet. The battery is now ready to be installed in
your vehicle. Please see the Battery Installation section on page
16 for detailed instructions on installing your battery. If your
battery is already installed in your vehicle, simply re-connect
the motor harness connector to the battery.
1
Battery
Charger
Connector
P8990a-0920
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
WARNING
7/16" Washer
Children can be harmed by small parts,
Rear Wheel Driver
sharp edges and sharp points in the vehicle's
unassembled state, or by electrical items.
Care should be taken in unpacking and
assembly of the vehicle. Children should
not handle parts, including the battery,
or help in assembly of the vehicle.
Rib
Wheel
Hubcap
CAUTION
2
In the unassembled state, this package contains
small parts. Adult assembly is required.
• Slide a hubcap, indented side down, onto the rear axle.
• Slide a wheel onto the rear axle. Make sure the ribs on the
wheel face up.
• Slide a rear wheel driver, ring side down, onto the rear axle.
Fit the grooves on the rear wheel driver onto the ribs on the wheel.
• Slide a 7/16" washer onto the rear axle.
Rear Axle
Rear Axle
Motor Assembly Pins
Rear Axle Assembly
.437 Cap Nut
Rear Wheel Driver
Motor Assembly
3
1
• Position the vehicle upright. Face the back end of the vehicle.
• Fit a .437 cap nut onto one end of the rear axle.
• Tap the other end of the rear axle with a hammer to secure the
cap nut on the end of the rear axle.
Hint: You will need to temporarily hold the remaining rear wheel
driver onto the motor assembly to properly position the rear
axle assembly into the motor assembly.
Hint: You may want to position the cap nut on a scrap block of
wood to protect the assembly surface.
• Fit and hold the remaining rear wheel driver against the motor
pins on one end of the motor assembly, as shown.
• While holding the rear wheel driver in place, slide the rear
axle assembly into the hole in the opposite side of the motor
assembly. Make sure the rear wheel driver on the rear axle
assembly fits onto the pins in the motor assembly.
• Slide the rear wheel driver off the end of the rear axle.
P8990a-0920
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Ring End
Motor Assembly
Front Axle
Wheel
7/16"
Washer
Hubcap
Hubcap
Cap Nut
Cap Nut
Assembly
Tool
Rear Axle
Round
Bushing
Cap Nut
Assembly Tool
7/16" Washer
Cap Nut
Rear Wheel
Driver
5
• Face the front end of the vehicle.
4
• Slide a 7/16" washer onto one of the front axles.
• Slide a round bushing, ring end first, onto the front axle.
• Slide a wheel (ribbed side first) onto the front axle.
• Slide a hubcap (indented side out) onto the front axle.
• Fit a .437 cap nut on the end of the front axle.
• Slide a 7/16" washer onto the rear axle.
• Slide the rear wheel driver onto the rear axle. Make sure the
rear wheel driver fits onto the pins in the motor assembly.
• Slide a wheel onto the rear axle. Make sure the ribs on the
wheel fit into the grooves on the rear wheel driver.
• Slide a hubcap, indented side out, onto the rear axle.
• Fit a .437 cap nut on the end of the rear axle.
• Fit the cupped end of the cap nut assembly tool over the cap
nut. Tap the end of the cap nut assembly tool with a hammer
to secure the cap nut on the end of the rear axle.
• Fit the cupped end of the cap nut assembly tool over the cap
nut. Tap the end of the cap nut assembly tool with a hammer
to secure the cap nut on the end of the axle.
• Repeat this procedure to assemble a 7/16" washer, round
bushing, wheel, hubcap and cap nut to the other front axle.
Hint: You may need the help of another adult to support the
other end of the rear axle while you tap the cap nut assembly
tool with a hammer.
10
P8990a-0920
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Front Tabs
Cowling
Front Tabs
PRESS HERE
To Snap Side Tabs
Side Tab
TM
Side Tab
Shifter Handle
Rear Tab
8
• Press firmly on each side of the cowling to snap the four side
tabs into the slots in the vehicle. Make sure the rear tab stays
aligned with the slot.
Motor
Harness
6
PRESS HERE
To Snap Rear Tab
• Press the tab under the back of the
seat and lift to remove the seat.
• Make sure the motor harness wires are
positioned in the channel to prevent
them from being pinched between the
cowling and vehicle.
• Fit the rectangular opening in the cowling over the
shifter handle.
Note: You may need to flex the shifter to the side to fit the
cowling over the high speed lock-out screw.
• Align the front, side and rear tabs on the cowling with the slots
in the vehicle. DO NOT snap the tabs into the slots.
9
• Press firmly on the back of the cowling to snap the rear tab
into the slot in the vehicle.
PRESS COWLING HERE
To Snap Front Tabs
PULL VEHICLE BODY
UP HERE
To Snap Front Tabs
7
• Press firmly on the front of the cowling to snap the four, front
tabs into the slots in the vehicle. Make sure the side and rear
tabs stay aligned with the slots.
Note: Pull up on the front of the front end of the vehicle while
pressing down on the cowling to make sure the front tabs snap
into the slots.
P8990a-0920
11
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Handlebar
Steering
Column
Handlebar
Neck
Rounded
Side
#10 Lock Nuts
10
• Position the handlebar upright.
• Fit the handlebar neck to the bottom of the handlebar.
5
"
• Insert two #10 x 1 /8 screws down through the handlebar and
Cap Nut
handlebar neck.
• Fit a #10 lock nut onto the ends of both screws. Make sure the
rounded side of the lock nut is down.
12
• While holding a lock nut steady with an adjustable wrench
(or pliers), tighten the screw. Repeat this procedure to tighten
the other screw.
• Fit a .437 cap nut on the curved end of the steering column.
• Support the steering column and tap the cap nut with
a hammer to secure it on the end of the steering column.
Hint: You may need the help of another adult to support the
other end of the steering column while you tap the cap nut with
a hammer.
• Set the handlebar assembly aside for assembly step 14.
• Lower the front end of the vehicle.
Steering
Column
Steering Bushing
Upper Steering
Lower Steering
Linkage
Linkage
Steering
Column
Top View
13
Bottom View
11
Hole
• Lift the front end of the vehicle.
Hint: You may want the help of another adult to support the
steering column near the steering linkage while assembling the
handlebar to the vehicle.
• Slide the steering bushing, narrow side down, onto the
steering column and into the vehicle neck.
• Slide the straight end of the steering column through the
hole in the upper steering linkage and out through the hole
in the vehicle.
• Insert the curved end of the steering column into the hole in
the lower steering linkage.
P8990a-0920
12
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Front
Handlebar
Housing
Steering
Column
Handlebar
Assembly
Handlebar
16
14
• Fit the front handlebar assembly into the front of the handlebar.
• Fit the handlebar assembly onto the end of the steering
column. Make sure the handlebar grip area points towards the
rear of the vehicle.
#10 Lock
Nut
Back
Handlebar
Assembly
#10 x 3/4" Screw
17
Rounded
• Now, fit the back handlebar assembly to the front
handlebar assembly.
• Insert two #6 x 1/2" screws into the two top, center holes in the
back handlebar assembly, as shown. Tighten the screws.
Side
15
• Insert the #10 x 3/4” screw through the hole in the end of the
steering column, so that the screw head faces the rear of
the vehicle.
• Fit the #10 lock nut onto the end of the screw. Make sure the
rounded side of the lock nut faces forward.
• While holding the lock nut steady with an adjustable wrench
(or pliers), tighten the screw.
P8990a-0920
13
Download from Www.Somanuals.com. All Manuals Search And Download.
DECORATION
ASSEMBLY
Proper label application will help to keep the labels
looking their best! When applying labels, keep the
following guidelines in mind:
• Wash your hands before applying the labels.
• Before applying the labels, wipe the surface of the vehicle
with a clean, dry cloth to remove any dust or oils.
• Place the labels exactly as shown in the illustrations.
• For best results, avoid repositioning a label once it has
been applied to the vehicle.
• After applying a label, rub the label firmly with a clean,
dry cloth to make sure the label is adhered to your vehicle.
Start at the center of a label, and smooth towards the outer
edges to remove air bubbles.
18
• Insert six #6 x 1" screws through the back handlebar assembly,
as shown. Tighten the screws.
mph
Km/h
14
8
19
• Fit a hand grip onto each end of the handlebar. If it is difficult
to slide the hand grips onto the handlebar, moisten the hand
grips with warm water first.
9
TM
DASH AND REAR VIEW
P8990a-0920
14
Download from Www.Somanuals.com. All Manuals Search And Download.
DECORATION
3
12
1
10
5
RIGHT SIDE
7
7
2
13
13
11
6
1
10
4
LEFT SIDE
P8990a-0920
15
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY INSTALLATION
IMPORTANT! Use only a Power Wheels® 6 volt lead-acid
rechargeable battery. Use of any other battery will damage
your vehicle. Make sure that you charge the battery for at least
18 hours using the enclosed Power Wheels® 6 volt charger
before operating your vehicle for the first time. Charge the
battery for at least 14 hours after each use of the vehicle.
Never charge the battery longer than 30 hours. Failure to
follow these instructions may damage your battery and will
void your warranty.
6V Battery
Motor
Harness
Connector
3
• Place the battery upright in the battery compartment.
• Place the foam spacer in the battery compartment, behind
Seat
Tab
the battery.
• Plug the battery connector and motor harness connector
together. Push firmly to make sure the two connectors are
completely joined.
1
• Press the tab under the back of the seat and lift to remove
the seat.
Slot
Slot
Arm
Arm
Slot
Slot
4
Battery Retainer
Arms
• Lower the battery retainer over
the battery.
• Fit the battery retainer arms down into the slots in the vehicle.
• Press the battery retainer arms out over the lock tabs to snap
and secure the battery retainer arms in the slots.
2
• Squeeze the battery retainer arms together to release them
from the slots in the vehicle.
• Re-assemble the vehicle seat.
• Press the battery retainer arms in and over the lock tabs and
lift the battery retainer.
P8990a-0920
16
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY CARE AND DISPOSAL
Care
Disposal
If a battery leak develops, avoid contact with the leaking acid
and place the damaged battery in a plastic bag. See information
below for proper disposal.
• Your Power Wheels® battery is a non-spillable sealed lead-acid
battery. It must be recycled or disposed of in an environmentally
sound manner.
If acid comes in contact with skin or eyes, flush with cool water
for at least 15 minutes and call a physician.
• Do not dispose of a lead-acid battery in a fire. The battery may
explode or leak.
If acid is internally ingested, give water, milk of magnesia or
egg whites immediately. Never give emetics or induce vomiting.
Call a physician.
• Charge a new battery for at least 18 hours before first use.
Never charge the battery longer than 30 hours. Overcharging or
undercharging the battery may shorten battery life and decrease
vehicle running time.
• After the first charge, recharge the battery for at least 14 hours
after each use. Never charge the battery longer than 30 hours.
Charge the battery after each use, regardless of how long the
vehicle was used.
• The battery must be upright while charging.
• Do not allow the battery to run down completely before charging.
• Charge the battery before storing the vehicle.
• Charge the battery at least once per month, even if the vehicle
has not been used.
• Protect the environment by not disposing of this product with
household waste (2002/96/EC). Check your local authority for
recycling advice and facilities (Europe only).
• Do not dispose of a lead-acid battery in your regular, household
trash. The incineration, landfilling or mixing of sealed lead-acid
batteries with household trash is prohibited by law in
most areas.
• Return an exhausted battery to a federal or state approved
lead-acid battery recycler, such as a Power Wheels® authorized
service center or a local seller of automotive batteries. For the
authorized service center location nearest to you, please visit
Contact your local waste management officials for other
information regarding the environmentally sound collection,
recycling and disposal of lead-acid batteries. If you live in the
State of Florida or the State of Minnesota, it is prohibited by law
for anyone to throw away lead-acid batteries in the municipal
waste stream.
• Leaving the battery in a discharged condition will ruin it.
• Always remove an exhausted battery from the vehicle.
Battery leakage and corrosion can damage the vehicle.
• Do not store the battery on a surface (such as a kitchen counter
top) which could be damaged by the acid contained inside the
battery. Take precautions to protect the surface on which you
store the battery.
• Do not store the battery in temperatures above 75° F or
below -10° F.
• Use only a Power Wheels® 6 volt battery. Remember to charge
the new battery for at least 18 hours before first use.
• Prevent the battery from moving freely inside the battery
compartment. Always use the battery retainer to secure the
battery in the battery compartment.
• Examine the battery, charger and their connectors for excessive
wear or damage each time you charge the battery. If damage is
detected, do not use the charger or the battery until you have
replaced the worn or damaged part.
P8990a-0920
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFE DRIVING RULES
Teach Safety Rules to Children
While children can quickly develop the skill necessary to drive
RIDING HAZARD
this vehicle, it is important to remember that their judgment skills
are still very immature. Unsupervised driving by children can
lead to serious injury. Before children use this vehicle, an adult
should carefully evaluate the driving area as well as the children’s
skill level and ability to drive this vehicle safely. Children are not
always able to recognize or anticipate hazards, even when they
have been taught about them. There is no acceptable substitute
for direct adult supervision.
Teach appropriate safety rules to your child before allowing
operation of this vehicle. These rules should also be reviewed
with neighborhood children or other playmates who want to
drive this vehicle.
WARNING
• Prevent Injuries and Deaths
• Direct Adult Supervision Required
• Keep Children Within Safe Riding Areas.
These areas must be:
- away from swimming pools and other
bodies of water to prevent drownings
- generally level to prevent tipovers
- away from steps, steep inclines, cars,
roads and alleys.
• Riding Rules
Make sure children know and follow
these rules for safe driving and riding.
- Always sit on the seat.
Riding Rules
Make sure children know and follow these rules for safe driving:
1. Always sit on the seat.
2. Always wear shoes.
3. Only 1 (one) rider at a time. A child who is not sitting on the
seat or who is standing on the vehicle could fall off, cause
a tip-over or block the driver’s view. A child could be
seriously injured.
4. Do not allow any child to drive the vehicle in the street or near
moving (motorized) vehicles.
- Always wear shoes.
- Only 1 (one) riders at a time.
5. Do not allow any child to drive near bodies of water (such as
pools or creeks), obstructions (such as furniture, low tree limbs
or play equipment), or drop-offs (such as stairs or decks).
6. Do not allow any child to drive the vehicle in the dark. A child
could encounter unexpected obstacles and have an accident.
Operate the vehicle only in the daytime or a well-lit area.
7. Do not allow your child to drive on sloped or inclined surfaces.
Restrict your child’s driving to generally level ground ONLY!
8. Do not allow your child to drive down or across a steep slope.
- The vehicle may gain unsafe speed, even if the pedal is
released to stop.
- The vehicle may tilt and tip over.
Use vehicle on generally level ground ONLY!
- The wheels could lose traction, causing the vehicle to slip.
9. Do not allow your child to drive up steep inclines. The motor may
stop and the vehicle could roll backwards at an unsafe speed.
10.Never put anything near any moving parts. Rotating parts such
as motors, gear boxes and wheels can snag fingers, hair, etc.,
causing serious injury. Do not allow operation of the vehicle
when it is on its side or in an upside-down position.
11.Do not operate the vehicle near flammable vapors (gasoline,
paint thinner, acetone, liquid wax, etc.). The vehicle’s electrical
switches, like most electrical switches, emit an internal spark
when first turned on or turned off. The presence of flammable
liquids or vapors could cause an explosion or a fire. Keep all
flammable products in tightly sealed containers and away from
the vehicle.
12.Do not allow a child to operate the vehicle without direct
adult supervision. To prevent unsupervised use of the vehicle,
disconnect the motor harness from the battery when the vehicle
is not in use.
To disconnect the motor harness and battery connector:
- Press the tab under the back of the seat and lift to remove
the seat.
- Pull the motor harness connector from the battery.
- Replace the seat on the vehicle.
18
P8990a-0920
Download from Www.Somanuals.com. All Manuals Search And Download.
VEHICLE OPERATION
IMPORTANT! Use this vehicle ONLY outdoors. Most interior
floor-ing can be damaged by riding this vehicle indoors.
Fisher-Price® will not be responsible for damage to the floor
if the vehicle is used indoors.
Shifter
2
Shifter
IMPORTANT! To avoid damaging the motors and gears,
make sure to stop the vehicle before switching from forward
to reverse.
• Move the shifter to the REVERSE position.
• Press the foot pedal. The vehicle backs-up at a maximum
1
of 21/2 mph.
• Help your child practice steering to learn how far and how
quickly to turn the handlebar when driving in reverse.
• Make sure the shifter is in the FORWARD position.
• Press the foot pedal. The vehicle drives forward at a maximum
of 21/2 mph.
• Help your child practice steering to learn how far and how
quickly to turn the handlebar when driving forward.
• Your vehicle has a patented, electronic braking system that
automatically stops the vehicle when your child’s foot is lifted
from the pedal.
• Make sure your child is comfortable with steering the vehicle
and automatically knows how to stop.
Hint: Once your child is comfortable operating the vehicle
forward, introduce reverse.
P8990a-0920
19
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
VEHICLE CARE
• Check all screws, cap nuts and their protective coverings
regularly and tighten as required. Check plastic parts on
a regular basis for cracks or broken pieces.
• During snowy or rainy weather, the vehicle should be stored
inside or under a protective cover. Remember to charge the
battery at least once per month while your vehicle is not in
regular use.
• Avoid operating the vehicle in wet or snowy conditions, and do
not spray the vehicle with a hose. Do not wash the vehicle with
soap and water. Water or moisture in the motors or electrical
switches can cause them to corrode, and could cause switch
or motor failure.
• Avoid operating the vehicle on sand, loose dirt or gravel. Sand,
loose dirt or gravel in the motors or electrical switches can
cause them to jam, and could cause switch or motor failure.
Bumper-to-Bumper*
Limited Warranty
One year limited warranty from the date of
purchase on the Power Wheels® vehicle.
Six month limited warranty on the 6 volt battery.
For the original purchaser, this one year limited warranty
covers the Power Wheels® ride-on vehicle (purchased
from Power Wheels®) against defects in materials and
workmanship. The six month limited warranty applies only
to the 6 volt battery included by Power Wheels® with the
original purchase of the vehicle.
This warranty covers normal use and does not cover
the Power Wheels® vehicle or battery if damaged by
unreasonable use, neglect, accident, abuse, misuse,
improper service or other causes not arising out of defects
in materials or workmanship. Evidence of any attempt at
consumer repair will void this warranty. THIS WARRANTY
DOES NOT COVER, AND IS INTENDED TO EXCLUDE, ANY
LIABILITY ON THE PART OF POWER WHEELS®, WHETHER
UNDER THIS WARRANTY OR IMPLIED BY LAW FOR ANY
INDIRECT OR CONSEQUENTIAL DAMAGES FOR BREACH
OF WARRANTY. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION SO THIS LIMITATION MAY
NOT APPLY TO YOU.
• The vehicle can be wiped down with a soft, dry cloth. For a shiny
finish, you can wipe plastic parts with a non-wax furniture
polish applied to a soft-cloth. Do not use automotive wax.
Do not use soap and water or spray the vehicle with a hose.
• To ensure that your vehicle stays in good operating order, we
recommend that you periodically have your vehicle checked by
a Power Wheels® authorized service center. For the location of
the authorized service center nearest you, please visit us on-line
Should you need service or assistance with your vehicle
during the warranty period, do not return the vehicle to the
store. Power Wheels® has provided a nationwide network
of authorized service centers. If there is not an authorized
service center in your area, please visit us on-line at
www.powerwheels.com or call Consumer Relations for
information, 1-800-348-0751.
This warranty gives you specific legal rights, and you may
also have other rights which may vary from state to state.
PLEASE SAVE YOUR ORIGINAL SALES RECEIPT.
20
P8990a-0920
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEMS AND SOLUTIONS GUIDE
IMPORTANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below. If you still
experience a problem, please contact Power Wheels® Consumer Relations, toll-free at 1-800-348-0751 between 9AM - 7PM (EST)
Monday through Friday and 11AM - 5PM (EST) Saturday. Or, contact your local Power Wheels® authorized service center. For the
PROBLEM
POSSIBLE CAUSE
SOLUTION
Vehicle does not run
Undercharged battery
Charge the battery. A new battery should have been
charged for at least 18 hours before using the vehicle for
the first time. After first-time use, recharge the battery for
at least 14 hours after each use. Never charge the battery
longer than 30 hours.
Check all connectors. Make sure the charger connector is
tightly plugged into the battery, and that the charger is
plugged into the wall.
Make sure power flow to the wall outlet is “ON”.
Charger is not working
Tripped thermal fuse
There is no sure way to tell if your charger is working unless
you have a volt meter. If you suspect there is a problem with
your charger, contact your local Power Wheels® authorized
service center. They can test your charger for you.
The built-in thermal fuse may "trip" and shut down operation
of the vehicle if the vehicle is overloaded or the driving
conditions too severe. Once a fuse has "tripped", remove
your foot from the pedal and wait 25 seconds before
operating the vehicle again. To avoid repeated automatic
shutdowns, do not overload the vehicle by exceeding the
65 lb maximum weight capacity or by towing anything behind
the vehicle. Do not drive up hills or run into fixed objects,
which can cause the wheels to stop spinning while power
is still being supplied to the motors. If a thermal fuse
continually trips, contact your local Power Wheels®
authorized service center.
Loose wires or loose connectors
Dead battery
Check all wires and connectors. Make sure the motor
harness connector is plugged into the battery and that
there are no loose wires around the motors.
If your battery is old or if you have not followed Battery
Care instructions, your battery may be dead. If you are
unsure whether or not the battery is dead, you can have
it tested at your local Power Wheels® authorized
service center.
Electrical switch damage
The electrical switches can become corroded due to
exposure to water or moisture, or can jam due to loose dirt,
sand or gravel. Contact your local Power Wheels® authorized
service center for diagnosis and repair.
Motor damage
Contact your local Power Wheels® authorized service center
for diagnosis and repair.
Vehicle was running but
suddenly stopped
Loose wires or loose connectors
Check all wires and connectors. Make sure the motor
harness connector is plugged into the battery, and that there
are no loose wires around the motors.
Tripped thermal fuse
The built-in thermal fuse may "trip" and shut down operation
of the vehicle if the vehicle is overloaded or the driving
conditions too severe. Once a fuse has "tripped", remove
your foot from the pedal and wait 25 seconds before
operating the vehicle again. To avoid repeated automatic
shutdowns, do not overload the vehicle by exceeding the
65 lb maximum weight capacity or by towing anything behind
the vehicle. Do not drive up hills or run into fixed objects,
which can cause the wheels to stop spinning while power is
still being supplied to the motors. If a thermal fuse continually
trips, contact your local Power Wheels® authorized
service center.
P8990a-0920
21
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEMS AND SOLUTIONS GUIDE
PROBLEM
POSSIBLE CAUSE
SOLUTION
Short run time (Less than
1 - 3 hours per charge)
Undercharged battery
Charge the battery. A new battery should have been
charged for at least 18 hours before using the vehicle for
the first time. After first-time use, recharge the battery for
at least 14 hours after each use. Never charge the
battery longer than 30 hours.
Check all wires and connectors. Make sure the charger
connector is tightly plugged into the battery, and that the
charger is plugged into the wall.
Make sure power flow to the wall outlet is “ON”.
Overcharged battery
Do not charge the battery longer than 30 hours. If you
suspect that your battery is damaged as a result of
overcharging, contact your local Power Wheels® authorized
service center. They can test the battery for you.
Battery is old and will not
accept full charge
Even with proper care, a rechargeable battery does not
last forever. Average battery life is 1 to 3 years depending
on vehicle use and use conditions. Replace only with
a Power Wheels® 6 Volt Lead-Acid Rechargeable Battery.
Do not substitute parts.
Tripped thermal fuse
The built-in thermal fuse may "trip" and shut down operation
of the vehicle if the vehicle is overloaded or the driving
conditions too severe. Once a fuse has "tripped", remove
your foot from the pedal and wait 25 seconds before
operating the vehicle again. To avoid repeated automatic
shutdowns, do not overload the vehicle by exceeding the
65 lb maximum weight capacity or by towing anything
behind the vehicle. Do not drive up hills or run into fixed
objects, which can cause the wheels to stop spinning while
power is still being supplied to the motors. If a thermal
fuse continually trips, contact your local Power Wheels®
authorized service center.
Vehicle runs sluggishly
Undercharged battery
Charge the battery. A new battery should have been
charged for at least 18 hours before using the vehicle for
the first time. After first-time use, recharge the battery for
at least 14 hours after each use. Never charge the battery
longer than 30 hours.
Check all connectors. Make sure the charger connector
is tightly plugged into the battery, and that the charger is
plugged into the wall.
Make sure power flow to the wall outlet is “ON”.
Be sure to charge the battery after each use.
Battery needs charging
Battery is old and will not
accept full charge
Even with proper care, a rechargeable battery does not
last forever. Average battery life is 1 to 3 years depending
on vehicle use and use conditions. Replace only with
a Power Wheels® 6 Volt Lead-Acid Rechargeable Battery.
Do not substitute parts.
Vehicle is overloaded
Make sure you do not overload the vehicle by allowing
more than one rider at one time, exceeding the 65 lb.
maximum weight capacity, or by towing objects behind the
vehicle. If the vehicle is overloaded, the built-in thermal
fuse in the battery may "trip", and automatically shut
down operation of the for approximately 25 seconds.
Adjust the driving conditions to prevent repeated
automatic shutdowns.
Driving conditions are too stressful
Use only on generally level ground.
P8990a-0920
22
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEMS AND SOLUTIONS GUIDE
PROBLEM
POSSIBLE CAUSE
SOLUTION
When the foot pedal is pressed
only one rear wheel spins
Operation of vehicle in low speed
It is possible that only one rear wheel may spin when both
rear wheels are raised off the ground and the vehicle is in
low speed. This does necessarily indicate a problem. Check
for proper operation of the drive system by raising the rear
wheels off the ground and pressing the foot pedal. If only one
rear wheel spins, carefully press your hand on the spinning
wheel to slow it down. The other rear wheel should begin to
spin. If the other rear wheel does not begin to spin, there
may be a problem with the vehicle. Contact your local
Power Wheels® authorized service center for diagnosis
and repair.
Sometimes the vehicle doesn’t
run, but other times it does
Loose wire or connector
Motor or electrical switch damage
Loose wire or connector
“Dead Spot” on motor
Check all wires around the motors and all connectors to
make sure they are tight.
Contact your local Power Wheels® authorized service
center for diagnosis and repair.
When the foot pedal is pressed,
the vehicle won’t run without
a push
Check all wires around the motors and all connectors
to make sure they are tight.
Contact your local Power Wheels® authorized service
center for diagnosis and repair.
Battery’s thermal fuse constantly
"trips", but the vehicle is not
overloaded nor the driving
conditions too severe
Damaged battery
Contact your local Power Wheels® authorized service
center for diagnosis and repair.
Child is switching between
FORWARD and REVERSE
without stopping
Teach your child to stop the vehicle before
switching direction.
Loud clacking or grinding
noise from a motor-gearbox
Broken gears
Contact your local Power Wheels® authorized service
center for diagnosis and repair.
Charger gets warm during use
It is normal for some chargers to get
warm during use and is not reason
for concern. Some chargers do not
get warm during use.
No action required.
If your charger does not get warm during use, it does not
mean that it is not working properly.
Battery makes a sizzling or
gurgling noise when charging
It is normal for some batteries to
make noise and swell slightly while
charging and is not reason for concern.
No action required.
If your battery does not make noise or swell slightly
during charging, it does not mean that it is
not accepting the charge.
If, after reviewing the Problems and Solutions Guide, the vehicle still fails to operate, please contact your nearest authorized
service center.
P8990a-0920
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Before first-time use,
you must charge the battery
18 hours!
Charge the battery immediately after each use.
Charge the battery once a month, even if the vehicle
is not used or stored.
Do not return
yourvehicle to the store!
We're a toll-free phone call away, and we can help.
If you are missing parts or need assistance, please call:
1-800-348-0751
9AM - 7PM EST, Monday through Friday and 11AM - 5PM, Saturday.
Or contact your local independently owned and operated
Power Wheels® Authorized Service Center.
DC SUPER FRIENDS and all related characters and elements are trademarks of and © DC Comics.
WB SHIELD: TM & © Warner Bros.
Entertainment Inc.
(s08)
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052 U.S.A. ©2008 Mattel, Inc. All Rights Reserved.
Fisher-Price and Power Wheels by Fisher-Price are U.S. trademarks of Mattel, Inc.
® and TM designate U.S. trademarks of Mattel, Inc., unless otherwise indicated.
PRINTED IN MEXICO
P8990a-0920
Download from Www.Somanuals.com. All Manuals Search And Download.
|