Fisher Paykel Garbage Disposal GD75IA1 User Manual

Installation instructions  
and user guide  
Food waste disposer  
GD75IA1  
NZ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Contents  
Safety and warnings  
Installation instructions  
Operating instructions  
Cleaning and maintenance  
Troubleshooting  
2
3
8
9
10  
11  
12  
Manufacturer’s warranty  
Customer care  
Important!  
SAVE THESE INSTRUCTIONS  
The models shown in this user guide may not be available in all markets and are  
subject to change at any time. For current details about model and specification  
availability in your country, please go to our website listed on the back cover  
or contact your local Fisher & Paykel dealer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
Safety and warnings  
Use this appliance only for its intended purpose as described in this User Guide.  
Important safety precautions !  
When using this appliance, always use basic safety precautions, including the following:  
Danger!  
This appliance is not intended for the use by children or infirmed persons without supervision.  
To reduce the risk of injury, close supervision is required when a waste disposer is used  
near children.  
Do not put fingers or hands into the waste disposer.  
Unplug the unit before attempting to clear a jam or remove an object from the disposer.  
As the waste disposer is magnetic, use only non-magnetic tools such as a wooden spoon or  
long handled plastic tongs when attempting to loosen a jam or remove objects from the  
waste disposer.  
To reduce the risk of injury by materials that may be expelled by a waste disposer, do not put  
non-food items, or any of the following into the food waste disposer:  
a) Shells, such as mussel or oyster shells.  
b) Caustic drain cleaners or similar products.  
c) Glass, china or plastic.  
d) Large whole bones.  
e) Metal, such as bottle caps, tin cans, utensils or aluminium foil.  
f) Hot grease or other hot liquids.  
g) Whole corn husks or similar fibrous material.  
When not operating the waste disposer, leave the drain stopper in place to reduce the risk of  
objects falling into the disposer.  
Your new appliance must be properly installed in accordance with the installation instructions  
before it is used.  
Never unplug the waste disposer by pulling on the power cord.  
Always grip the plug firmly and pull straight from the outlet.  
Repair or replace immediately all electric service cords that have become frayed or  
otherwise damaged.  
Power cords must be replaced by a qualified electrician or authorised service engineer.  
Do not use a cord that shows cracks or abrasion along it’s length or at either the plug  
or appliance end.  
WARNING!  
Electrical Shock Hazard  
To reduce the risk of electric shock or injury to persons, read the IMPORTANT SAFETY  
PRECAUTIONS before operating this appliance.  
SAVE THESE INSTRUCTIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Installation instructions  
Before you begin  
Please read these installation instructions completely and carefully.  
The following installation instructions are intended as a general guide.  
Please ensure that the waste disposal unit is installed according to local building codes for  
your area.  
Installation is recommended to be done by a qualified plumber or installer.  
Product failure due to improper installation is not covered under the Warranty.  
Preparation  
Removing an existing waste disposer, if installed  
1
2
3
Disconnect electrical power supply to existing disposer.  
Remove old disposer or sink flange assembly.  
Inspect drain line. If it is heavily coated with hardened grease and accumulations, clear out the  
build-up using a plumber’s rod or auger.  
4
Remove old sealing materials and gaskets from sink opening, both top and bottom.  
What you will need  
Phillips screwdriver  
Flat blade screwdriver  
Steel Punch or wooden dowel  
Petroleum jelly or liquid soap  
Plumber’s Putty  
Important!  
Top and bottom of sink and sink flange surfaces must be free of any materials to prevent leaks.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Installation instructions  
1
Unpacking your waste disposer  
2
1
2
Remove the waste disposer from the packaging.  
Identify and check that all components are  
included in the carton before beginning the  
installation (fig. 1).  
3
4
5
3
Take care not to misplace any of the  
components.  
6
7
Components  
8
1. Stopper  
2. Sink flange  
9
3. Rubber gasket  
4. Flange ring  
5. Protector ring  
6. Mount ring  
7. Screw clamp  
8. Hopper with splash guard  
10  
11  
9. Dishwasher discharge inlet  
10. Drain housing  
11. Reset button  
12. Built in air-switch  
13. Lower shell  
12  
13  
14. End Bell (Electrical Connections)  
15. Power cord  
14  
15  
16. Outlet gasket  
Fig 1. Three Bolt Mount System  
17. Discharge waste elbow  
18. Waste elbow flange nut  
16  
17  
18  
Fig 1.2. Elbow  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Installation instructions  
Installing the waste disposer  
1
2
Loosen the clamp screw to allow the mounting system to be  
removed from the unit (fig.2).  
Turn the mounting assembly over and remove the flange ring  
from the track on the sink flange. Undo the three screws holding  
it together. This will allow the sink flange, mount ring, and  
protector ring to separate (fig 3).  
Fig. 2 Removing the mounting  
system from the waste disposer  
Use the flat blade screwdriver as a lever if required.  
3
4
Apply a small amount of plumbers putty to the lip of the sink  
flange and position the sink flange into the sink drain hole  
ensuring that the rubber gasket on the underside of the sink  
flange is firmly in place (fig.4).  
Approaching from under the sink, slide the protector ring  
and mount ring onto the underside of the sink flange. Fit the  
flange ring into the track on the sink flange, then tighten the 3  
mounting screws evenly and securely (fig.5).  
Fig. 3 Disassembling the  
mounting system  
Note:  
Ensure that the mounting assembly connection is fixed securely  
and tightly.  
No dishwasher connection required  
If a dishwasher is not being connected to the waste disposer,  
please proceed to step 7.  
Fig. 4 Fitting the flange into the  
sink drain hole  
Connecting to a dishwasher  
If you are connecting to a dishwasher, please continue with  
steps 5 & 6.  
5
Using a blunt instrument (steel punch or wooden dowel), knock  
out the entire plug at the end of the dishwasher drain inlet (as  
shown in fig.6). Do not use a screwdriver or sharp instrument.  
When the knockout plug falls into disposer, you may remove  
it or simply grind it up when the disposer is used. This will not  
damage the disposer in any way, but may take some time to  
grind, over the course of several uses.  
Fig. 5 Fixing the mounting system  
to the underside of the sink  
6
Connect the dishwasher drain hose to the dishwasher inlet pipe  
on the waste disposer (fig. 6). Use a clamp to ensure a tight  
seal. A stepped rubber adaptor (not supplied with the product)  
may be required if the diameter of the drain hose is larger than  
the diameter of the waste disposer’s inlet connection.  
Fig. 6 Connecting to a dishwasher  
(if required)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Installation instructions  
7
8
Connect the discharge elbow to the lower outlet on the waste  
disposer (fig. 7).  
Prior to connecting the waste disposer to the mounting  
assembly, press firmly down on the rubber splash guard to  
check that is firmly fitted onto the neck of the hopper.  
9
Lubricate the top lip and angled surface of the rubber splash  
guard with liquid soap or petroleum jelly (fig. 8 ).  
Fig. 7 Connecting the discharge  
elbow  
Important!  
Please do not remove clamp and splash guard from hopper. Both parts  
are factory installed and installation ready.  
10 Align the discharge elbow up with the waste pipe (refer to  
fig.11) so that the waste disposer is correctly positioned, prior to  
engaging with the mounting assembly.  
Fig. 8 Lubricate the rubber  
splash guard  
11 Guide the waste disposer up to the sink flange (fig. 9). Engage  
the groove of the splash guard around the ridge at the bottom  
of the sink flange. A slight rocking motion may be required to  
help ensure a proper fit.  
12 While still supporting the body of the waste disposer, tighten  
the screw clamp around the rubber splash guard (fig.10). The  
waste disposer will now hang by itself.  
Fig. 9 Engage the waste disposer  
13 Connect the discharge elbow up with the waste pipe (fig.11)  
and tighten the slip nut on the drain pipe.  
Note:  
If you need to rotate the waste disposer to connect with the  
waste pipe, it is important to make sure the sink flange does  
not turn. Movement of the sink flange will break the seal. If this  
occurs, disengage the waste disposer from the discharge elbow  
and mounting assembly Return to step 10 to realign the waste  
disposer before repeating steps 11-13.  
Fig. 10 Tightening the clamp  
Important  
Ensure that the reset button is readily accessible after installation of the  
waste disposer.  
Fig. 11 Connecting the drain  
outlet  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Installation instructions  
Installing the air-switch (optional)  
1
Select a location on the bench top for the air switch to be  
positioned (recommended position is near the sink). Mark and  
cut a hole, 33mm in diameter, in the bench top.  
2
3
Remove the nut from the thread of the air switch (fig.12).  
Fig. 12 Fitting the air switch  
Feed one end of the PVC tubing up through the cutout, from  
the underside of the bench top, and attach to the underside of  
the push button.  
4
Insert the push button into the bench top cut out (fig.12).  
Feed the PVC tube through the nut. Screw the nut onto the  
thread tightly (fig.13), securing the push button tightly onto  
the bench top.  
Note:  
Fig. 13 Securing to the bench top  
Do not use a wrench to tighten the nut.  
5
Connect the other end of the PVC tubing to the air switch  
outlet, located on the underside of the waste disposer (fig.14).  
Controlling the waste disposer by a wall  
mounted switch  
The waste disposer can be controlled by means of a wall  
mounted switch rather than the bench mounted air switch  
supplied with the product.  
Fig. 14 Connecting tube to air  
switch outlet  
To use an existing wall mounted switch:  
1
2
Connect one end of the PVC tubing to the underside of the air switch button.  
Connect the other end of the PVC tubing to the air switch outlet on the underside of the waste  
disposer (as shown in fig.14).  
3
4
Press the button on the air switch to activate the waste disposer.  
Whilst the waste disposer is running, disconnect the PVC tubing from the air switch outlet on the  
underside of the waste disposer.  
5
Turn the waste disposer off using the wall mounted switch. The waste disposer can now be  
turned on and off using the wall mounted switch.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Operating instructions  
Operating instructions  
1
Remove the sink stopper and turn on a medium flow of cold water.  
Note:  
Do not use hot water. Only cold water should be run through the waste disposer.  
2
3
Press the air switch or the wall mounted switch to activate the waste disposer.  
Feed food items through the sink opening of the waste disposer gradually.  
Note:  
Overloading the waste disposer with too much food waste at once may cause the blades to jam  
and the disposer to shut down. The overload button may be required to be reset. Refer to the  
Overload Reset button section on page 9.  
Caution!  
Do not put hands or fingers into the waste disposer.  
4
Before turning the waste disposer off, let the water and the disposer run for approximately half a  
minute after shredding stops. This assures that all the food waste is thoroughly flushed through  
the trap and drain.  
Helpful Hints  
If a dishwasher drain hose has been connected to the waste disposer, be sure that the waste  
disposer’s chamber is empty before using the dishwasher to ensure the dishwasher is able to  
drain properly.  
It is recommended to leave the stopper in the drain when the disposer is not in use to prevent  
utensils and foreign objects from falling into the waste disposer.  
The waste disposer is designed to give you years of trouble-free service. The grind mechanism is  
built to handle all normal food wastes, but WILL NOT grind and dispose of items such as tin cans,  
bottles, bottle caps, glass, china, leather, large bones, mussel or oyster shells. These are waste  
materials that should be collected with your household rubbish.  
We recommend cutting or breaking up items which require considerable grinding time, such  
as melon rinds, grapefruit skins, bones and corn cob husks or dispose of these items with your  
household waste collection.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
Cleaning and maintenance  
Your waste disposer is self-cleaning and scours itself with each use. Under normal usage, your  
waste disposer will not require any special care.  
Note:  
Always run cold water into the chamber before, during and after using the waste disposer.  
Do not use hot water.  
Removing an odour  
Grinding up a tray of ice cubes will help to clean the shredding plate.  
Running orange or lemon rinds through the waste disposer will help to freshen up the  
grinding chamber.  
Note:  
Do not pour bleach or drain cleaners, into the waste disposer  
Never put corrosive substances or chemicals into the waste disposer.  
Unblocking a jam  
Before investigating a blockage, you MUST disconnect the power supply.  
The waste disposer is magnetic. ALWAYS use non-magnetic tools, such as a wooden spoon  
or long handled plastic tongs when attempting to loosen a jam or remove an object from the  
waste disposer.  
1
2
After clearing the blockage or jam, turn the power back on , turn on a medium flow of  
cold water and run the waste disposer for half a minute to ensure that all the food waste is  
thoroughly flushed through the trap and drain.  
3
Note:  
If the motor does not start when activated, refer to the Overload Reset Button section below or  
the Troubleshooting guide on page 9.  
Overload Reset button  
The waste disposer is fitted with an overload control which prevents the motor from operating  
should overloading occur. Overloading occurs when the motor is unable to turn, usually caused  
by a foreign object falling in to the chamber or too much food waste being fed through into the  
chamber at once, jamming the shredding plate.  
When overloaded the motor will stop automatically. To restart the motor the overload reset  
button must be pressed.  
The reset overload button is a small red button located opposite the power cord outlet, near the  
bottom of the waste disposer. Before resetting the overload button, you MUST disconnect the  
power supply.  
Important!  
The motor is permanently lubricated for life. Do not attempt to lubricate your waste disposer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Troubleshooting  
Troubleshooting tips  
Problem  
Possible causes  
What to do  
Waste disposer  
is not starting  
No electricity at the power  
outlet.  
Check that the plug is correctly connected and power is  
turned on.  
Check another appliance at the same outlet.  
Check house fuse.  
Air switch tubing not  
connected  
Check that the air switch, or wall switch, is correctly  
connected. Refer to page 7 of the installation instructions.  
Foreign object may be  
lodged between the  
Turn power supply and water tap off. Rotate the turntable,  
using a plastic, wooden or non-magnetic implement to  
turntable and grinding ring. dislodge the foreign object.  
Grinding chamber may  
be overloaded with food  
waste or foreign matter.  
Turn the power and water tap off and, using a plastic,  
wooden or non-magnetic implement, remove the  
food waste or foreign matter. Refer to the operating  
instructions section.  
Safety overload button may The reset overload button is a red button located  
have tripped.  
externally, opposite the power cord outlet, near the  
bottom of the waste disposer.  
Abnormal noise A spoon, bottle cap or  
when operating other foreign object may  
have fallen into the waste  
Turn power supply and water tap off. Wait until grinding  
blades and turntable has stopped turning. Use a plastic,  
wooden or non-magnetic implement to remove the  
foreign object.  
disposer  
Waste disposer  
is jammed  
Foreign object may be  
lodged between the  
Turn power supply and water tap off. Rotate the turntable,  
using a plastic, wooden or non-magnetic implement to  
turntable and grinding ring. dislodge the foreign object.  
Unit is leaking  
at the top  
Improper seating of the  
sink flange.  
Check that the sink flange is centred and sealed tightly  
into the sink drain by the mounting assembly from  
connections  
underneath. Refer to step 2 of the installation instructions.  
Improperly installed rubber Check that the rubber gasket is sitting flat under the  
gasket.  
lip of the sink flange. Refer to step 2 of the installation  
instructions.  
Mount ring not tightened  
properly  
Discharge outlet elbow may not be tightened.  
Check the discharge elbow is tight. Refer to step 13 of the  
installation instructions.  
Unit is leaking  
at the discharge may not be tightened.  
outlet.  
Discharge outlet elbow  
Check the discharge elbow is tight. Refer to step 13 of the  
installation instructions.  
Water is slow to  
drain from the  
sink  
Rubber splash guard  
fingers trapping air inside  
the chamber.  
When the rubber splash guard is new, air can become  
trapped within the chamber preventing water from  
draining quickly. Pushing food through the rubber splash  
guard will release the air and the water will drain. Over  
time, the splash guard fingers will soften and flex, holding  
back less air and aiding drainage.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
Manufacturer’s warranty  
Fisher & Paykel undertakes to  
Repair or, at its option, replace without cost to the owner either for material or labour any part of  
the Product, the serial number of which appears on the Product, which is found to be defective  
within TWO YEARS from the date of purchase.  
This warranty DOES NOT Cover  
A
B
Service calls which are not related to any defect in the Product. The cost of a service call will be  
charged if the problem is not found to be a Product related fault. For example:  
1. Correct the installation of the product.  
2. Instruct you how to use the product.  
3. Replace house fuses or correct house wiring.  
4. Correcting fault(s) caused by the user.  
5. Correcting damage caused by pests, eg. rats, cockroaches etc.  
Defects caused by factors other than:  
1. Normal domestic use or  
2. Use in accordance with the Product’s User Guide.  
C
D
Defects to the Product caused by accident, neglect, misuse or ‘Act of God.  
The cost of repairs carried out by non-authorised repairers or the cost of correcting such  
unauthorised repairs.  
E
F
Normal recommended maintenance as set out in the Product’s User Guide.  
Repairs when the appliance has been dismantled, repaired or serviced by other than a  
Fisher & Paykel AUTHORISED CUSTOMER SERVICE CENTRE or the selling dealer.  
Pick up and delivery.  
Transportation or travelling costs involved in the repair when the product is installed outside the  
Fisher & Paykel AUTHORISED CUSTOMER SERVICE CENTRE’S normal service area.  
G
H
Service under this manufacturer’s warranty must be provided by an Authorised Service Agent  
(refer to the Customer care section for contact details). Such service shall be provided during  
normal business hours. This warranty certificate should be shown when making any claim.  
Note:  
This Warranty is an extra benefit and does not affect your legal rights and applies only to product  
purchased in New Zealand and Australia.  
Please keep this User Guide in a safe place.  
Do not return to Fisher & Paykel.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Customer care  
Check the things you can do yourself.  
Refer to your User Guide and check:  
1
2
your appliance is correctly installed  
you are familiar with its normal operation  
If after checking these points you still need assistance, please refer to your nearest  
Authorised Service Centre, or contact us through our local website listed on the back cover.  
In New Zealand if you need assistance...*  
Call your Fisher & Paykel retailer who is trained to provide information on your appliance, or if we  
can be of any further help, please contact our Customer Care Centre,  
Toll Free: 0800 FP CARE or 0800 37 22 73  
Fax: (09) 273 0656  
Postal address: P.O. Box 58732, Greenmount, Auckland  
If you need service...*  
Fisher & Paykel has a network of independent Fisher & Paykel Authorised Service Centres whose  
fully trained technicians can carry out any service necessary on your appliance. Your dealer or  
our Customer Care Centre can recommend an Authorised Service Centre in your area.  
In Australia if you need assistance...*  
Call the Fisher & Paykel Customer Care Centre and talk to one of our Customer Care Consultants.  
Toll Free: 13 00 650 590  
Fax: (07) 3826 9298  
Postal Address: PO Box 798, Cleveland QLD 4163  
If you need service...*  
Fisher & Paykel Australia Pty Ltd has a network of independent Fisher & Paykel Authorised  
Service Centres whose fully trained technicians can carry out any service necessary on your  
appliance. Our Customer Care Centre can recommend an Authorised Service Centre in your area.  
*If you call or write, please provide: name, address, model number, serial number, date of  
purchase and a description of the problem. This information is needed in order to better respond  
to your request for assistance.  
Product Details  
Fisher & Paykel Appliances Ltd  
Model/Serial No.  
Date of Purchase  
Dealer  
Purchaser  
Suburb  
Town  
Country  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Copyright © Fisher & Paykel 2008. All rights reserved.  
The product specifications in this booklet apply  
to the specific products and models described at  
the date of issue. Under our policy of continuous  
product improvement, these specifications may  
change at any time. You should therefore check  
with your Dealer to ensure this booklet correctly  
describes the product currently available.  
NZ  
Food waste disposer installation  
and user guide  
Published: 09/2008  
Part No. 791634  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Cradlepoint Network Cables CBA750 User Manual
Craftsman Blower 358748200 User Manual
Crane Merchandising Systems Hot Beverage Maker 6530006 User Manual
Cypress Computer Hardware CY7C68003 User Manual
Dynex Camcorder Accessories DX MW010 User Manual
EdgeStar Dishwasher PDW45E User Manual
Elation Professional Work Light 108IP User Manual
Escali Scale USTT180 User Manual
Freecom Technologies DVD Player LS PRO User Manual
Geemarc Answering Machine AMPLI455 User Manual