AAP 314 and AAP 424 • Installation Guide
Follow the steps below to install an AAP 314 or AAP 424 mounting frame, along with the
Decora® modules and AAPs of your choice.
1
Using the supplied mud ring as a guide, mark and cut out the
appropriate material within the marked area.
2
Insert the mud ring into the opening, and rotate the locking
arms.
3
3
ER
T
PU
M
CO
Run all required cables from the output or input
device location, behind the wall and to the Decora
module.
C
C
B
A
4
Mount the cabled Decora module into the mud ring. Feed cables
through the mud ring as necessary.
5
Mount the AAPs to the AAP 314 or AAP 424.
6
Connect the remaining cables to the AAPs.
ER
T
PU
M
CO
(2) #6-32 x 1/2" screws
C
C
B
A
4
1
3
AAP
7
Use the provided screws to mount the AAP 314 or AAP 424
to the mud ring assembly, feeding the cables through the
mud ring as necessary.
(2) #6-32 x 1/4" screws
68-2521-50
Rev. A
11 13
Extron USA Headquarters
+1.800.633.9876 (Inside USA/Canada Only)
Extron USA - West:
Extron USA - East:
+1.714.491.1500
+1.919.850.1000
FAX: +1.714.491.1517
FAX: +1.919.850.1001
|