Speed Dome
EPTZ3100/EPTZ3100I
USER MANUAL
Date: Jan. 2009
Download from Www.Somanuals.com. All Manuals Search And Download.
3. EPTZ3100/EPTZ3100I CAMERA SETUP MENU.................................38
3.1.
3.2.
Structure of the Setup Menu ...................................................................38
VIDEO SETTINGS .....................................................................................39
3.2.1. EXPOSURE ........................................................................................39
3.2.2. FOCUS MODE....................................................................................41
3.2.3. DIGITAL ZOOM...................................................................................42
3.2.4. WHITE BALANCE...............................................................................42
3.2.5. DAY/NIGHT.........................................................................................42
3.2.6. DIG. NOISE REDUCE.........................................................................43
3.2.7. WIDE DYNAMIC RANGE....................................................................43
3.2.8. EXIT ....................................................................................................44
POSITIONS................................................................................................45
OSD/AREAS..............................................................................................48
3.4.1. CAM. TITLE.........................................................................................48
3.4.2. AREAS................................................................................................48
3.4.3. DIRECTIONS......................................................................................50
3.4.4. DISPLAY .............................................................................................52
3.4.5. EXIT ....................................................................................................54
AUTO MODES...........................................................................................54
3.5.1. AUTOPAN ...........................................................................................54
3.5.2. PRESET TOURS ................................................................................57
3.5.3. PATTERN............................................................................................58
3.5.4. AUTO RESUME..................................................................................59
3.5.5. RESUME TO.......................................................................................59
3.5.6. POWER UP FUNC..............................................................................60
3.5.7. AUTO FLIP..........................................................................................60
3.3.
3.4.
3.5.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5.8. EXIT ....................................................................................................60
ALARM ......................................................................................................60
3.6.1. ALARM INPUTS..................................................................................60
3.6.2. ALARM OUTPUTS..............................................................................63
3.6.3. MOTION DETECT...............................................................................64
3.6.4. EXIT ....................................................................................................64
PRIVATE ZONES.......................................................................................65
SYSTEM.....................................................................................................67
INFO...........................................................................................................68
3.6.
3.7.
3.8.
3.9.
3.10.
EXIT ...........................................................................................................69
4. EPTZ3100/3100I FUNCTION SETUP AND OPERATION ....................70
4.1.
4.2.
4.3.
4.4.
4.5.
4.6.
Manual Control Mode...............................................................................70
Auto Pan Mode .........................................................................................70
Position Setting........................................................................................71
Tour Mode .................................................................................................72
Alarm Link to a Position/Tour..................................................................73
Other Operations......................................................................................74
4
Download from Www.Somanuals.com. All Manuals Search And Download.
1. EPTZ3100/EPTZ3100I OVERVIEW
1.1. Introduction
EPTZ3100 series has 2 types, EPTZ3100 is outdoor type whereas EPTZ3100I is
indoor type, using high sensitivity and high resolution CCD to display high quality
image. The design of ICR (IR cut filter removable) can provide real color even under
strong sunlight in day time. Under slight light in night time, a clear image can still be
displayed. WDR design allows the camera to be installed in any environment. Fast
moving function can reach to 360°/1sec. No matter h igh speed scanning or low speed
scanning, the solid base can avoid vibration. This full-functioned speed dome can
perform best quality images!
ꢀ EPTZ3100 for outdoor model; EPTZ3100I for indoor model
ꢀ Built in 30x Optical Zoom Lens
ꢀ Super High Resolution 520TV Lines
ꢀ True Day/Night function (IR Cut Filter Removable)
ꢀ Wide Dynamic Range
ꢀ Digital Slow Shutter
ꢀ Privacy Zone Masking
ꢀ Motion Detection
ꢀ Auto detection of protocols
ꢀ Tilt rotation range: 180°
ꢀ 192 preset positions are available
ꢀ 16 cruise tours can be set, and each tour contains up to 16 positions
ꢀ 4 Alarm Inputs / 2 Alarm Outputs
ꢀ Running to position speed, 0.01º/s to 360º/s
ꢀ RS485 Communication
ꢀ IP66 (for EPTZ3100)
Furthermore, the micro control unit enables camera a nimble and exact movement
from minimal 0.01°/sec to maximal 360°/sec. It can go to every preset position in 1
second. It also has other advantages such as:
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁ
ꢁ
ꢁ
192 preset positions are available.
16 cruise tours can be set, and each tour contains up to 16 positions.
Up to 256 speed domes can be supported on a RS-485 bus when all speed
domes are controlled by keyboard EKB500.
ꢁ
ꢁ
Built-in fan to enhance heat dissipation at high temperature and circulate
heat to keep system operation at low temperature.
Built-in 4 alarm inputs and 2 alarm outputs.
All of the features make the intelligent high-speed dome camera works for a wide
range and demanding application such as banks, airports, stations, casinos, streets
of cities, intelligent buildings, etc.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2. Specifications
Product Model
Pickup Device
Video Format
EPTZ3100 (outdoor)
EPTZ3100I (indoor)
1/4” CCD
NTSC or PAL
NTSC: 525 TV lines, 60 fields/sec
PAL: 625 TV lines, 50 fields/sec.
768 x 494 (NTSC)
Scanning System
Picture Elements
752 x 582 (PAL)
Horizontal Resolution
Sensitivity
520 TV Lines
0.4 Lux/ F1.6 (ICR OFF)
0.08 Lux/ F1.6 (ICR ON)
S/N Ratio
50 dB (Weight ON)
Electronic Shutter
128x~1/60~1/120,000(s) (NTSC)
128x~1/50~1/120,000(s) (PAL)
Digital Slow Shutter
Shutter Selection
Lens Type
128x
AUTO; A.FLK; Manual 128x~1/60 (1/50)~1/120,000 selectable
30x optical zoom, f=3.3 mm (wide) to 99.0mm (tele),
F1.6 to F3.2
Zoom Ratio
240x max. (30x Optical and 8x Digital zoom)
True Day & Night
Backlight Comp.
Wide Dynamic Range
White Balance
Yes (Auto/DAY/NIGHT)
Yes (OFF/LOW/MIDDLE/HIGH)
Yes (OFF/ON/AUTO)
Indoor / Outdoor/MAN5100K/MAN3200K/MAN2000K/ONE
PUSH
Yes (ON/OFF)
Yes (8 zones)
1Vp-p / 75 ohm
Internal
Motion Detection
Privacy Zone Masking
Video Output
Sync. Mode
Power Source
24VAC
Power Consumption
Operating Temperature
21W Max
-10℃~+50℃≤85%
﹣40℃~+50℃≤95%
Focus Control
One push/Auto/Manual
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Horizontal Rotation Speed
0.01°/s －360°/s (1-255 grade shift gears)
Horizontal Rotation Range
Tilt Rotation Range
360°unlimited rotation
180°pendulum motion
Auto Zoom Speed Control
Control speed auto-adjusted according to zoom length
changing
Auto Pan, 2 points
scanning
Can set freely
1－255 grade available
1－99 second available
Auto Pan Speed
Dwell Time (2 points)
Preset Positions
192 positions
1－255 grade available,0.01º/s - 360º/s
Running to position speed
Dwell time at preset
position
1－99 available
Tour
16 groups
Tour point per group
Pattern
16 preset positions
4 patterns with 90 sec long each
Fan
Fan auto starts
Position Accuracy
Alarm
±0.1°
4 in 2 out with tour/position auto triggering
Built-in Menu for Functions
Communication
Communication Speed
Yes
RS-485
1200/2400/4800/9600bps
EVF-1; EVF-2; Pelco-P ;Pelco-D; A-Type; Plus-D; AUTO;
Panasonic
Built-in Protocols
(Plus-D supports all other brands, it is equivalent to Pelco-D)
Address Editable
Speed Dome Address
Manual Pan/Tilt Speed
Safety
Yes (through DIP switch)
0-255
Pan: 0.01º ~ 360º/s ; Tilt: 0.01º ~ 180º/s
CE, FCC
Dimensions
180mm(W) x 270mm(H) ; 70.9”x106.3”
3.0kg
Weight
8
Download from Www.Somanuals.com. All Manuals Search And Download.
1.3. Feature
1.3.1. Profile of EPTZ3100/EPTZ3100I
EPTZ3100
Wall Mount Bracket
Top housing
Outer housing
Sun shield (optional)
Bubble
Camera main body
Camera module
EPTZ3100I
Top housing
Camera
Outer housing
Bubble
main body
Camera
Module
9
Download from Www.Somanuals.com. All Manuals Search And Download.
1.3.2. EPTZ3100/EPTZ3100I Base Board
The base board that is inside the top housing connects to power cable, video cable,
control cable, alarm cable and fan. In order to connect to cables, the board needs to be
taken off, and put back after finishing connecting to all cables. The connectors of cable
names are marked on the board in white text. The details of the alarm connector are
shown on the APPENDIX.
There are 4 alarm inputs and 2 alarm outputs available, represented by Pin 1~12. Pin 13
and 14 are video pins for connecting to video cable. Pin15~16 are RS485 pin for
connecting to keyboard. Pin 17 and 18 are power pin for connecting to 24VAC power.
13~14 15~16
VIDEO RS485
17~18
24VAC
1~12 ALARM
EPTZ3100 Base board
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Pin #
1
Function
ALM_NO_B (Alarm Output Normal Open B)
ALM_COM_B (Alarm Output Common B)
ALM_NC_B (Alarm Output Normal Close B)
ALM_NO_A (Alarm Output Normal Open A)
ALM_COM_A (Alarm Output Common A)
ALM_NC_A (Alarm Output Normal Close A)
ALMIN1 (Alarm Input 1)
GND (Ground)
2
3
4
5
6
7
8
9
ALMIN2 (Alarm Input 2)
ALMIN3 (Alarm Input 3)
GND (Ground)
10
11
12
13
14
15
16
17
18
ALMIN4 (Alarm Input 4)
VIDEO+
VIDEO-
RS485-
RS485+
AC24A+
AC24B-
11
Download from Www.Somanuals.com. All Manuals Search And Download.
1.4. EPTZ3100/EPTZ3100I Quick Operation Guide (Work with EKB500)
EPTZ3100/EPTZ3100I and EKB500 (Keyboard) can work together by using factory
default setting. You just need to connect cables by the following steps:
1. Connect the RS-485 cable to EPTZ3100/EPTZ3100I and a keyboard (EKB500).
2. Connect a video cable from EPTZ3100/EPTZ3100I to a monitor.
3. Connect the power to the EPTZ3100/EPTZ3100I and a keyboard (EKB500).
After the EPTZ3100/EPTZ3100I finishes the self-test mode, you can start to operate
the EPTZ3100/EPTZ3100I via the keyboard.
To operate the EPTZ3100/EPTZ3100I:
UP
IRIS
+
Focus
F.
Zoom
In
ZoomOUT
ZoomIN
LEFT
RIGHT
-
N.
Out
DOWN
1. Shift the Joystick up/down or right/left to view from camera.
2. Turn the top of the Joystick to zoom in/out.
3. Press Zoom In/Out, Focus F. /N. and IRIS +/- function keys to operate the
EPTZ3100/EPTZ3100I.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
2. EPTZ3100/EPTZ3100I INSTALLATION
2.1. Packing List
There are 3 boxes that are camera main body with a camera module, top housing with a
base board & pin connector and outer housing with bubble, plus one tool packet in the
package. The detail accessories are listed below:
Standard
ꢁ
ꢁ
ꢁ
ꢁ
Camera Main Body x 1
Top Housing x1
Outer Housing with Bubble x1
Tool packet
ꢂ Glove x 1 pair
ꢂ RS485 Terminal Block
ꢂ 3 desiccant packs
Optional Accessories
* EPTZ-PBOX
(External Power
Connection Box)
* Corner Mount Adapter
* Pole Mount Adapter
* Indoor Ceiling Pendent Mount
Bracket
* Outdoor Sunshield
* Wall Mount Bracket
* Indoor Recessed Mount Bracket
* Indoor Concrete Ceiling Mount
Adapter
13
Download from Www.Somanuals.com. All Manuals Search And Download.
* EKB500 (Keyboard)
* EKB200 (USB Controller
Keyboard)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2. Cable Needed
Yellow RS485+
Orange RS485-
VIDEO
24VAC
Power Cable
An adapter with 24VAC/3.5A output provides the power to the EPTZ3100/EPTZ3100I. An
extension power line may be needed.
Note: The input AC voltage range of an adapter depends on different area.
Please make sure the voltage range before installing.
Video Cable
A BNC cable is used for connecting an EPTZ3100/EPTZ3100I to a DVR or a monitor. An
amplifier may be needed if the video cable is too long.
RS485 Cable
Yellow wire represents RS485+, orange wire represents RS485-. Connect RS485 to
EKB500 and you will be able to control the speed dome by a keyboard. If you are unable
to control the speed dome with EKB500, it is probably due to a mis-connection. Please
try to switch RS485 wires and connect again.
2.3. Initial Setup
Initial setup includes dome address, communication protocol, transmission speed, and
15
Download from Www.Somanuals.com. All Manuals Search And Download.
terminal resistance settings. All of the settings should be confirmed before the dome is
installed. The control-related setting that is address, communication protocol and
transmission speed have to be set consistently with the control device such as a keyboard
or a DVR.
Notice: Please make sure the power is off before setting, and restart the
EPTZ3100/EPTZ3100I to enable a new value after changing.
2.3.1. Address Setting
The address code of the EPTZ3100/EPTZ3100I should be set to correspond properly
with a control device to control multiple dome cameras. The address codes are made
up by the dip switch on the camera main body. The 8 bits dip switch indicates the
binary coded of the address, and there are 256 addresses can be selected (0 ~ 255). It
also means that there are up to 256 dome cameras that can cascade on the RS-485
bus. The dip switch setting and the indicated address are represented in the following
diagram.
Note: The factory default address is 1.
Notice: Please make sure the power is off before setting, and restart the
EPTZ3100/EPTZ3100I to enable a new value after changing.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
ON
1
ON
1
2
3
4
5
6
7
8
2
3
4
5
6
7
8
Protocol/Baud rate
ID address
Note: You will see the label of Protocol & Baud Rate as well as RS-485 ID address show
on the speed dome. White part represents the switch key. For example: for EVF protocol,
white keys are all switched downward; for ID Address 0, white keys are all switched
downward.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Switch
Address
Switch
Address
Switch
Address
Switch
Address
ON
ON
ON
ON
0
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
ON
ON
ON
ON
1
97
1
1
1
1
ON
ON
ON
ON
2
98
1
1
1
1
ON
ON
ON
ON
3
99
1
1
1
1
ON
ON
ON
ON
4
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
1
1
1
1
ON
ON
ON
ON
5
1
1
1
1
ON
ON
ON
ON
6
1
1
1
1
ON
ON
ON
ON
7
1
1
1
1
ON
ON
ON
ON
8
1
1
1
1
ON
ON
ON
ON
9
1
1
1
1
ON
ON
ON
ON
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Switch
Address
Switch
Address
Switch
Address
Switch
Address
ON
ON
ON
ON
128
160
192
224
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
ON
ON
ON
ON
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
19
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3.2. Communication Protocol Setting
The 1st, 2nd and 3rd bits are used to set communication protocol. The factory default
protocol is EVF.
Notice: Please make sure the power is off before setting, and restart the
EPTZ3100/EPTZ3100I to enable a new value after changing.
Set all of protocol switches to ON; the speed dome EPTZ3100/EPTZ3100I will
enter a self-test mode.
2.3.3. Transmission Speed Setting (Baud Rate Setting)
The 4th and 5th bits on the PCB board are used to set the Baud Rate. The default baud rate
setting is 9600.
9600 BPS 4800 BPS 2400 BPS 1200 BPS
SW2
Protocol
Baud Rate
Notice: Please make sure the power is off before setting, and restart the
EPTZ3100/EPTZ3100I to enable a new value after changing.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4. Bracket and Speed Dome Installation
2.4.1. Installation Requirements
1. Installation should be handled by a qualified service agent and should comply with
all local regulations. Service personnel should expect potential problems such as
surface strength, surface material, falling objects, outer breaches, building vibration
or other similar conditions.
2. Check for all necessary materials, and ensure if the selected installation location is
suitable for the EPTZ3100/EPTZ3100I.
Bracket
Bracket base
Top housing
Main body
ETPZ3100 overview
21
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4.2. EPTZ3100 Dome Camera Wall Mount Simple Installation
1. Screw the top housing to bracket by using a hexagon wrench.
2. Put the waterproof silicon pad on top of the bracket base for waterproof purpose.
Waterproof silicon pad
Bracket base
22
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Connect the cable you detached from base board to the RS485 cable, Power cable and
video cable you thread from the wall or ceiling. RS485 cable has to be connected via a
terminal block. If you need to connect alarm cable, thread the alarm cable through the
second hole. Note: Since video cable and power cable are bare wires, installers have to
prepare their own BNC connector and power cord connector.
RS485 cable
Video cable
Power cable
Alarm cable
4. Screw in 4 screws for mounting the bracket base.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Screw in 4 long screws to fix the bracket to bracket base.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4.3. EPTZ3100 Dome Camera Wall Mount Installation
Note: Installation location that is a wall, a pole or a ceiling needs to support above five
times the total weight of the camera assembly (about 16 kg) to avoid shaken images, and
dropping.
1. Pull the hole of the base board to open it. Detach the power and RS485 wires first by
using a screw driver.
Pull here to open
25
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Apply the adhesive stripe at back of desiccant pack to the inner side of the top housing.
There are totally 3 desiccant packs to be applied.
3. When all the desiccant packs are pasted and alarm cables are connected properly, put
the base board back to its original place, you will need to pull open the switch in order to
have the base board fitted to the top housing.
Pull open this switch
Note:
To close the base board, please push the base board twice consequently to lock it up.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Put the waterproof silicon pad on top of the base board for waterproof purpose.
Waterproof silicon pad
Base board
5. Connect the cable you detached from base board to the RS485 cable, Power cable and
video cable you thread from the wall or ceiling. RS485 cable has to be connected via a
terminal block. If you need to connect alarm cable, thread the alarm cable through the
second hole. Note: Since video cable and power cable are bare wires, installers have to
prepare their own BNC connector and power cord connector.
RS485 cable
Video cable
Power cable
Alarm cable
27
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Screw in 4 screws for mounting the bracket base.
7. Thread the cable through the bracket.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Screw the top housing to bracket by using a hexagon wrench.
9. Screw in 4 long screws to fix the bracket to bracket base.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Pull the hole of base board to open it again. Connect the power and RS485 wires back
to power pin and RS485 pin. If you need to connect alarm, connect alarm cable to alarm
pin.
11. Hold and push the main body toward the bracket until it is firmly fixed to the bracket. To
release it, press orange buttons at both sides of the body.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Note 1:
When you push the orange buttons to detach the main body from bracket, please hold
the main body carefully, otherwise it may fall down.
Note 2:
Aim the Arrow label of the main body to the same Arrow label of the bracket when you
need to push the main body toward bracket.
12. Twist the cover of main body to top housing clockwise until it is firmly fixed to top
housing.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Note 1: In order to protect the bubble from dirt and scrape, please put on the gloves
before installing the bubble.
Note 2: The camera module on the mechanical part is very sensitive. Please be careful
when installing this part.
13. Turn on the power, and start to operate the EPTZ3100.
Note: When turning on the power, EPTZ3100 will enter self-inspection mode, and carry out
a self-testing program. After finishing self-inspection, you can start to operate the
EPTZ3100.
2.4.4. EPTZ3100 Dome Camera Ceiling Mount Installation
(Indoor Recessed Mount Bracket & Surface Ring)
The indoor recessed mount bracket and surface ring are used for ceiling mount installation.
Installation steps are described below:
1. Use the ceiling template provided to cut the ceiling.
Cut the ceiling
32
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Screw the 3 screws of EPTZ top housing to the 3 holes of indoor recessed mount
bracket.
3. Put the indoor recessed mount bracket to the hole that you just made on ceiling.
4. Use a screwdriver to turn the rotation clips (x 3) until they firmly fix to the ceiling.
rotation clip →
← rotation clip
33
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Snap main body to the indoor recessed mount bracket.
NOTE:
Aim the Arrow label of the main body to the same Arrow label of the bracket when you
need to push the main body toward bracket.
6. Turn the housing of speed dome until it fixes to the top housing.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Aim bracket’s fillister to surface ring’s fillister, turn it until it is firmly fixed.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
2.5. Bracket and Adapter
2.5.1. Indoor Ceiling Pendent Mount Bracket
The indoor ceiling pendent mount bracket is used for installing a speed dome on the
ceiling.
2.5.2. Pole Mount Adapter
The pole adapter is used for installing a wall mount bracket to a pole indoors or outdoors.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
2.5.3. Corner Mount Adapter
The corner mount is used for installing a wall mount bracket to a 270°corner of walls
indoors or outdoors.
2.5.4. Indoor Concrete Ceiling Mount Adapter
Indoor Concrete Ceiling Mount Adapter is used for indoor installation to concrete ceiling.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
3. EPTZ3100/EPTZ3100I CAMERA SETUP MENU
In this section, setup and operation guide of EPTZ3100/EPTZ3100I will be introduced.
There are 9 items of the setting menu.
3.1. Structure of the Setup Menu
Press MENU to enter camera setup menu.
Turn the Joystick up/down to change subentries, and right/left to change the setting. If
there is an arrow at the end of selection, it means that selection has a sub-menu, please
press Enter key of keyboard to enter sub-menu.
VIDEO SETTINGS
POSITIONS
OSD/AREAS
AUTO MODES
ALARM
PRIVATE ZONES
SYSTEM
INFO
EXIT
(diagram 3.1)
38
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2. VIDEO SETTINGS
In main menu, turn joystick Up / Down to select VIDEO SETTINGS. Turn joystick Left /
Right to enter VIDEO SETTINGS sub-menu (see diagram 3.2).
EXPOSURE<┘
FOCUS MODE
DIGITAL ZOOM
WHITE BALANCE
DAY/NIGHT
VIDEO SETTINGS
POSITIONS
OSD/AREAS
AUTO MODES
ALARM
ONE PUSH
OFF
OUTDOOR
AUTO
PRIVATE ZONES
SYSTEM
DIG. NOISE REDUCE
WIDE DYNAMIC RANGE
EXIT
MIDDLE
OFF
INFO
EXIT
(diagram 3.2)
EXPOSURE<┘
FOCUS MODE
DIGITAL ZOOM
WHITE BALANCE
DAY/NIGHT
ONE PUSH
OFF
EL. SHUTTER
SLOW SHUTTER
IRIS MODE
AUTO
OUTDOOR
AUTO
AUTO X4
AUTO
DIG. NOISE REDUCE
WIDE DYNAMIC RANGE
EXIT
MIDDLE
OFF
AUTO GAIN CTRL
EXIT
MIDDLE
(diagram 3.3)
3.2.1. EXPOSURE
In Exposure menu, there is a sub-menu. Press Enter key or turn joystick Left / Right to
enter Exposure sub-menu.
There are 4 options in Exposure: EL. SHUTTER, SLOW SHUTTER, IRIS MODE, and
AUTO GAIN CTRL.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
EL.SHUTTER: Select electronic shutter mode from the options of the menu. There are
AUTO, A.FLK , 1/50, 1/160 , 1/250 , 1/1000 , 1/2500, 1/10000, 1/120,000, X2, X4, X6
and X8.
AUTO: The AUTO electronic shutter mode is enabled. The shutter speed is controlled
automatically according to the brightness of the screen
A.FLK: Anti-Flicker. Camera will auto adjust the shutter to reduce the flicker caused by
fluorescent light.
1/60 (NTSC) and 1/50 (PAL): default auto shutter.
1/160: 1/160 sec shutter for NTSC and PAL
1/250: 1/250 sec shutter for NTSC and PAL
1/1000: 1/1000 sec shutter for NTSC and PAL
1/2500: 1/2500 sec shutter for NTSC and PAL
1/10000: 1/10000 sec shutter for NTSC and PAL
1/120000: 1/120000 sec shutter for NTSC and PAL
X2: Two times of the standard shutter. The standard shutter is 1/60 sec for NTSC and
1/50 sec for PAL
X4: Four times of the standard shutter.
X6: Six times of the standard shutter.
X8: Eight times of the standard shutter.
SLOW SHUTTER: Slow electronic shutter. In order to enhance the view in the low lux
environment, slow shutter allows more light go through the shutter. Select from OFF,
AUTO X4, AUTO X8, AUTO X12, AUTO X16, AUTO X32, AUTO X64, and AUTO X128.
OFF: Disable Slow Shutter function.
AUTO X4: The slow shutter is automatically adjusted by the camera and limited up to
four times of the standard shutter. The standard shutter is 1/60 sec for NTSC and 1/50
40
Download from Www.Somanuals.com. All Manuals Search And Download.
sec for PAL.
AUTO X8, AUTO X12, AUTO X16, AUTO X32, AUTO X64, and AUTO X128 work the
same as AUTO X4 with different times of shutter speeds.
NOTE: If EL. SHUTTER is selected, SLOW SHUTTER will be disabled.
IRIS MODE: AUTO mode or MANUAL mode can be selected.
MANUAL: The brightness of the image can be adjusted.
AUTO: The brightness of the image signal can be adjusted automatically depending on
the amount of light.
AUTO GAIN CTRL (AGC): When the brightness of the image taken under dark light is
under a certain level, the AGC functions to define whether to control the Gain
automatically or not. Select one mode from OFF, LOW, MIDDLE, HIGH.
EXIT: Select Exit to save settings and exit from current page.
3.2.2. FOCUS MODE
In Focus mode, we define focus type from ONE PUSH, AUTO and Manual.
ONE PUSH: Enable the one push trigger focus mode. The focus lens holds the same
position until the next trigger command is received. This function prevents
the wrong focus in dark.
AUTO: Auto focus is enabled. It automatically adjusts the focus position to maximize
the high frequency content of the picture in a center measurement area,
taking into consideration the high luminance and strong contrast
components.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUAL: Enable the manual focus mode.
3.2.3. DIGITAL ZOOM
Magnification of the digital zoom can be selected among OFF, 2X, 4X and 8X.
OFF: Disable the digital zoom function.
3.2.4. WHITE BALANCE
The white balance function corrects the abnormal white color into the normal white color
under any color temperature lighting. White Balance has the following modes:
OUTDOOR: This mode is an automatic mode. It is recommended to use this mode in
an area under a broad color temperature.
INDOOR: This mode is an automatic mode. The camera balances the color
automatically depending on the source of the light from 1800 to 10500K. It
is recommended to use this mode in an area under the limited color
temperature.
ONE PUSH: One Push Auto White Balance Mode.
MAN2000K: This mode is a manual mode. The color temperature will be fixed at
2000K.
MAN3200K: This mode is a manual mode. The color temperature will be fixed at
3200K.
MAN5100K: This mode is a manual mode. The color temperature will be fixed at
5100K.
3.2.5. DAY/NIGHT
In Day/Night, we define the ICR (IR Cut-Removable) mode settings. The camera is
built-in an infrared (IR) Cut-Filter which can be disengaged from the image path for
42
Download from Www.Somanuals.com. All Manuals Search And Download.
increased sensitivity in low light environments.
Select from AUTO, DAY and NIGHT
NIGHT: IR cut filter is always removed (ICR ON).
DAY: IR cut filter is always attached (ICR OFF).
AUTO: Auto Day/Night mode switch. The camera will automatically switch the settings
needed for attaching or removing the IR cut filter. With a set level of darkness, the IR
cut filter is automatically disabled (ICR ON), and the infrared sensitivity is increased.
With a set level of brightness, the IR cut filter is automatically enabled (ICR OFF).
3.2.6. DIG. NOISE REDUCE
DIGITAL NOISE REDUCE (DNR) function reduces background noise under low light
conditions differently in different modes. The noise reduction effect grows in OFF, LOW,
MIDDLE and HIGH modes in order.
OFF: No noise reduction effect.
LOW: Noise reduction effect is small but there is little afterimage.
MIDDLE: Noise reduction effect is generally effective in this mode. Noise can be
reduced properly and the afterimage is not strong.
HIGH: Noise reduction effect is excellent but afterimage is also strong.
3.2.7. WIDE DYNAMIC RANGE
This function is effective when shooting images against the sun, or when shooting a very
bright subject. When both, bright and dark areas exist, the objects of the two areas can
be seen clearly. In Wide Dynamic Range, we define wide dynamic range from LOW,
MIDDLE, HIGH and OFF.
OFF: Disable wide dynamic range.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice: When the wide dynamic range is ON, some part of the image may appear
solarized. This is normal for the wide dynamic range, and is not a camera malfunction.
3.2.8. EXIT
Select Exit to save settings and exit from current page.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3. POSITIONS
In main menu, turn joystick Up or Down to select POSITION option. Press Enter key or
turn joystick Left / Right to enter POSITION sub-menu (see diagram 3.4).
VIDEO SETTINGS
POSITIONS
SET POSITIONS <┘
FREEZE PICTURE
EXIT
OSD/AREAS
AUTO MODES
ALARM
OFF
PRIVATE ZONES
SYSTEM
INFO
EXIT
(diagram 3.4)
Press Enter key of keyboard to enter SET POSITIONS sub-menu.
Turn the joystick Left / Right to select preset position. There are totally 36 preset positions
can be set in one page. Once the preset position is selected, there will be a star (*) sign
beside preset number, then go to RETURN and turn the joystick Left / Right to exit from
current page.
PRESET POSITION
1
2
3
4
5
6
SET POSITIONS <┘
FREEZE PICTURE
EXIT
7
8
9
10
16
22
28
34
11
17
23
29
35
12
18
24
30
36
OFF
13
19
25
31
14
20
26
32
15
21
27
33
PREV PAGE/NEXT PAGE
RETURN
(diagram 3.5)
45
Download from Www.Somanuals.com. All Manuals Search And Download.
PRESET NO. 1
POSITION
SET <┘
100
SPEED
DWELL TIME (S)
FOCUS MODE
WHITE BALANCE
TITLE
4
MOVE TO POSITION
MANUAL
AUTO
1
IRIS+: SAVE AND RETURN
DEFAULT
ON
RETURN
(diagram 3.6)
POSITION: Select from SET and CLEAR.
SET: Select SET and press Enter key of keyboard, you will be entered to a sub-menu.
Turn the joystick to your desired position. Once the position is confirmed, press
IRIS+ key of keyboard to save setting and return to previous menu. If position is
set, there will be a star sign (*) beside position number.
Clear: Select Clear and press Enter key of keyboard, and the POSITION will be cleared.
You will automatically go back to the sub-menu of PRESET POSITION. Please
see diagram 3.7.
PRESET POSITION
1
2
3
4
5
6
7
8
9
10
16
22
28
34
11
17
23
29
35
12
18
24
30
36
13
19
25
31
14
20
26
32
15
21
27
33
PREV PAGE/NEXT PAGE
RETURN
(diagram 3.7)
46
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEED: Select the speed for the preset position. The value is from 1 to 255 and 255 is
the highest speed.
DWELL TIME (S): Select the dwell time (in second) for the preset position from 1 to 99.
FOCUS MODE: Select focus mode for the preset position from MANUAL, ONE PUSH and
AUTO.
WHITE BALANCE: Select the white balance for the preset position from Auto, Indoor and
outdoor.
TITLE: Enter title name for the preset position. Turn the joystick Up or Down to select the
character. Turn the joystick Left or Right to select the character position. Once the title is
inputted, turn the joystick to the last character and keep turning right again to return to
previous mode.
DEFAULT: Select ON to set the preset position to default value.
FREEZE PICTURE: Speed dome will stop at the previous position until the next position is
reached.
ON: freeze picture
OFF: disable freeze picture function.
EXIT: Select Exit to save settings and exit from current page.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4. OSD/AREAS
In main menu, turn joystick Up or Down to select OSD/AREAS. Turn joystick Left or Right
to enter OSD/AREAS sub-menu (see diagram 3.8)
VIDEO SETTINGS
POSITIONS
CAM. TITLE
AREAS <┘
DIRECTIONS <┘
DISPLAY <┘
EXIT
EPTZ3100__
OSD/AREAS
AUTO MODES
ALARM
PRIVATE ZONES
SYSTEM
INFO
EXIT
(diagram 3.8)
3.4.1. CAM. TITLE
Enter title name for the camera. Turn the joystick Up or Down to select the character.
Maximum 10 digits of character can be inputted. Turn the joystick Left or Right to select
the character position. Once the title is inputted, turn the joystick to the last character and
keep turning right again to return to previous mode.
3.4.2. AREAS
Press Enter key of keyboard or turn joystick Left/Right to enter AREAS sub-menu.
ZONE
CAM. TITLE
AREAS <┘
DIRECTIONS <┘
DISPLAY <┘
EXIT
EPTZ3100__
TITLE
RANGE CLR
1. ----------------------------
2. ----------------------------
3. ----------------------------
4. ----------------------------
5. ----------------------------
6. ----------------------------
7. ----------------------------
8. ----------------------------
--------<┘
--------<┘
--------<┘
--------<┘
--------<┘
--------<┘
--------<┘
--------<┘
[<┘]
[<┘]
[<┘]
[<┘]
[<┘]
[<┘]
[<┘]
[<┘]
RETURN
(diagram 3.9)
48
Download from Www.Somanuals.com. All Manuals Search And Download.
In zone menu, you can set a zone and name it, when the speed dome turns to the zone
you set, it will display zone name on the screen (only if “OSD/AREAS->Display -> Zone” is
set as “YES”). Turn the joystick to Up/Down to select the character. Turn the joystick Left
or Right to select the character position. Once the title is inputted, turn the joystick
Left/Right to go “Range” section, and press Enter key to enter Range sub-menu. Use the
joystick to move speed dome to its left position. Press IRIS+ key to save left position
setting and go to next step or press IRIS- to cancel.
ZONE
TITLE
ZONE1
RANGE CLR
1. ----------------------------
2. ----------------------------
3. ----------------------------
4. ----------------------------
5. ----------------------------
6. ----------------------------
7. ----------------------------
8. ----------------------------
--------<┘
--------<┘
--------<┘
--------<┘
--------<┘
--------<┘
--------<┘
--------<┘
[<┘]
[<┘]
[<┘]
[<┘]
[<┘]
[<┘]
[<┘]
[<┘]
MOVE TO LEFT POSITION
IRIS+: SAVE AND NEXT STEP
IRIS-: CANCEL
RETURN
(diagram 3.10)
Use the joystick to move speed dome to its right position. Press IRIS+ or IRIS- key to save
and return.
ZONE1
ZONE1
MOVE TO LEFT POSITION
IRIS+: SAVE AND NEXT STEP
IRIS-: CANCEL
MOVE TO RIGHT POSITION
IRIS+/IRIS-: SAVE AND
RETURN
(diagram 3.11)
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Turn joystick Right/Left to highlight the zone you have set and turn the joystick Up/Down to
select another zone number. If you wish to clear the zone you have set, go to “CLR” and
press Enter key.
3.4.3. DIRECTIONS
Press Enter key of keyboard or turn joystick Left/Right to enter DIRECTIONS sub-menu
(see diagram 3.12)
DIRECTIONS NORTH
SET NORTH<┘
CAM. TITLE
AREAS <┘
DIRECTIONS <┘
DISPLAY <┘
EXIT
EPTZ3100__
DEFAULT NORTH
RETURN
[PUSH ENT]
(diagram 3.12)
Press Enter key of keyboard or turn joystick Left/Right to enter DIRECTIONS sub-menu
(see diagram 3.13)
DIRECTIONS NORTH
SET NORTH<┘
DEFAULT NORTH
RETURN
[PUSH ENT]
MOVE TO POSITION
IRIS+: SAVE AND RETURN
(diagram 3.13)
1. Press Enter key of keyboard or turn joystick Left/Right to enter Set North position menu.
2. Move the joystick to North position.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press IRIS+ key of keyboard to save and return.
DIRECTIONS NORTH
SET NORTH <┘
DEFAULT NORTH
[PUSH ENT]
RETURN
(diagram 3.14)
4. Go to “DEFAULT NORTH” and press Enter key to set the north position as default north
position.
5. Go to Return and turn joystick Left/Right to return to previous menu.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4.4. DISPLAY
Press Enter key of keyboard or turn joystick Left/Right to enter DISPLAY sub-menu (see
diagram 3.15)
SHOW OSD
CAMERA TITLE
DIRECTIONS
ZONES
ON
NO
NO
NO
YES
NO
NO
NO
NO
CAM. TITLE
AREAS <┘
DIRECTIONS <┘
DISPLAY <┘
EXIT
EPTZ3100__
PRESET TITLE
ZOOM
FAN
MOTION
CAMERA STATUS
RETURN
(diagram 3.15)
1. SHOW OSD:
ON: show OSD of Camera Title, Directions, Zones, Preset Title, Motion, Zoom, Fan and
Camera Status.
OFF: do not show OSD.
2 SEC: show OSD for 2 seconds.
5 SEC: show OSD for 5 seconds.
10 SEC: show OSD for 10 seconds.
2. CAMERA TITLE
YES: show camera title
NO: do not show camera title
3. DIRECTIONS
YES: show directions
NO: do not show directions
52
Download from Www.Somanuals.com. All Manuals Search And Download.
4. ZONES
YES: show zones
NO: do not show zones
5. PRESET TITLE
YES: show preset title
NO: do not show preset title
6. ZOOM
YES: show zoom multiple when zoom in or zoom out.
NO: do not show zoom multiple.
7. FAN
YES: show fan indication when fan is enabled.
NO: do not show fan indication.
8. MOTION
YES: show motion message when a motion occurs.
NO: do not show motion message when a motion occurs.
9. CAMERA STATUS
YES: shows camera status
NO: do not show camera status
10. RETURN
Turn joystick Left/Right to return to previous menu
53
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4.5. EXIT
Select Exit to save settings and exit from current page.
3.5. AUTO MODES
In main menu, turn joystick Up/Down to select AUTO MODES. Turn joystick Left/Right to
enter AUTO MODES sub-menu (See diagram 3.16)
AUTOPAN <┘
PRESET TOURS <┘
PATTERN <┘
AUTO RESUME
RESUME TO
POWER UP FUNC
AUTO FLIP
VIDEO SETTINGS
POSITIONS
OSD/AREAS
AUTO MODES
ALARM
OFF
POS.1(H)
PREV MODE
ON
PRIVATE ZONES
SYSTEM
INFO
EXIT
EXIT
(diagram 3.16)
3.5.1. AUTOPAN
Press Enter key of keyboard or turn joystick Left/Right to enter AUTOPAN sub-menu (see
diagram 3.17)
AUTOPAN <┘
PRESET TOURS <┘
PATTERN <┘
AUTO RESUME
RESUME TO
POWER UP FUNC
AUTO FLIP
AUTOPAN
ENDLESS MODE
SPEED
ON
32
OFF
DWELL TIME L (S)
DWELL TIME R (S)
SET LEFT POS. <┘
SET RIGHT POS. <┘
DEFAULT
4
POS.1(H)
PREV MODE
ON
4
[EMPTY]
[EMPTY]
ON
EXIT
RETURN
(diagram 3.17)
54
Download from Www.Somanuals.com. All Manuals Search And Download.
a. ENDLESS MODE
ON: enable endless mode. The speed dome will perform 360 degree endless
auto-pan.
OFF: disable endless mode. The speed dome will perform auto-pan between position
left and position right.
b. SPEED
Select speed from 1~255 and 255 is the highest speed.
c. DWELL TIME L (S)
Select dwell time of the left position from 1~99 seconds.
d. DWELL TIME R (S)
Select dwell time of the right position from 1~99 seconds
e. SET LEFT POS.
Press Enter key or turn the joystick Left/Right to enter SET LEFT POS. menu. Turn the
joystick to the position where you wish to set Left position. Press IRIS+ key of keyboard to
save setting and return to previous menu. (see diagram 3.18)
55
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTOPAN
ENDLESS MODE
SPEED
ON
32
4
DWELL TIME L (S)
DWELL TIME R (S)
SET LEFT POS. <┘
SET RIGHT POS. <┘
DEFAULT
4
MOVE TO POSITION
IRIS+: SAVE AND RETURN
ON
IRIS-: RETURN
(diagram 3.18)
f. SET RIGHT POS.
Press Enter key or turn the joystick Left/Right to enter SET RIGHT POS. menu. Turn the
joystick to the position where you wish to set RIGHT position. Press IRIS+ key of
keyboard to save setting and return to previous menu. (see diagram 3.19)
Note: When Left/Right Position are set, the speed dome will patrol from left position to
right position clockwise.
AUTOPAN
ENDLESS MODE
SPEED
ON
32
4
DWELL TIME L (S)
DWELL TIME R (S)
SET LEFT POS. <┘
SET RIGHT POS. <┘
DEFAULT
MOVE TO POSITION
4
IRIS+: SAVE AND RETURN
ON
IRIS-: RETURN
(diagram 3.19)
56
Download from Www.Somanuals.com. All Manuals Search And Download.
g. DEFAULT
ON: all settings in AUTOPAN menu will be returned to default values.
OFF: the setting in AUTOPAN menu is not default value.
h. RETURN
Turn joystick Left/Right to return to previous menu
3.5.2. PRESET TOURS
Press Enter key or turn the joystick Left/Right to enter PRESET TOURS sub-menu (see
diagram 3.20)
TOUR NO. 1
AUTOPAN <┘
POS
DWELL
SPEED
PRESET TOURS <┘
PATTERN <┘
AUTO RESUME
RESUME TO
POWER UP FUNC
AUTO FLIP
1
2
3
4
5
6
7
PRE1<┘
PRE2<┘
PRE3<┘
PRE4<┘
PRE5<┘
PRE6<┘
PRE7<┘
DEFAULT
DEFAULT
DEFAULT
DEFAULT
DEFAULT
DEFAULT
DEFAULT
DEFAULT
DEFAULT
DEFAULT
DEFAULT
DEFAULT
DEFAULT
DEFAULT
OFF
POS.1(H)
PREV MODE
ON
EXIT
PREV PAGE/NEXT PAGE
RETURN
(diagram 3.20)
a. Tour NO.: Turn the joystick Left/Right to select tour number first
b. PRE: Turn the joystick Left/Right to select preset position. Press Enter key of
keyboard to go next setting. Max. 16 positions can be set for a tour.
c. DWELL: Turn the joystick Up/Down to set dwell time of the tour from 1~99 sec or
default.
d. SPEED: Turn the joystick Right after setting dwell time. Turn the joystick Up or Down
to select tour speed from 1 ~255 or default. Press Enter key when you finish Tour
57
Download from Www.Somanuals.com. All Manuals Search And Download.
setting of preset position.
e. PREV PAGE/NEXT PAGE: Turn the joystick Left to go previous page or turn joystick
Right to go next page.
f. RETURN: Turn joystick Left/Right to return to previous menu.
3.5.3. PATTERN
Press Enter key of keyboard to enter PATTERN sub-menu (see diagram 3.21)
AUTOPAN <┘
PRESET TOURS <┘
PATTERN <┘
AUTO RESUME
RESUME TO
POWER UP FUNC
AUTO FLIP
PATTERN SETUP
PATTERN DURATION ACTION
PAT1
PAT2
PAT3
PAT4
---
---
---
---
PLAY<┘
PLAY<┘
PLAY<┘
PLAY<┘
OFF
POS.1(H)
PREV MODE
ON
EXIT
RETURN
(diagram 3.21)
a. Turn the joystick Up or Down to select pattern number.
b. Turn the joystick Left or Right to select action mode, either PLAY, SET or CLEAR.
c. Select SET and press Enter key of keyboard.
PATTERN SETUP
PATTERN 1 RECORD MODE
90s REMAIN
PATTERN DURATION ACTION
PAT1
PAT2
PAT3
PAT4
---
---
---
---
SET
IRIS+: SAVE AND RETURN
IRIS-: CANCEL
PLAY
PLAY
PLAY
IRIS+: RETURN
(diagram 3.22)
58
Download from Www.Somanuals.com. All Manuals Search And Download.
d. Turn the joystick to record the tour you wish to set. Press IRIS+ when you finish
setting pattern tour. Press IRIS- if you wish to cancel this action. At duration column
of PATTERN SETUP menu, you will see the duration time of pattern you set.
e. When you return to PATTERN SETUP menu, turn the joystick Left/Right to PLAY.
Press Enter key of keyboard. The camera starts to run the pattern tour you set. The
camera keeps playing the pattern until you press IRIS- to cancel playing and it will
return to PATTERN SETUP menu.
PATTERN SETUP
PATTERN 1 PLAY MODE
90s REMAIN
1
PATTERN DURATION ACTION
PAT1
PAT2
PAT3
PAT4
---
---
---
---
PLAY
PLAY
PLAY
PLAY
IRIS-: CANCEL
IRIS+: RETURN
(diagram 3.23)
f. RETURN: Turn joystick Left/Right to return to previous menu.
3.5.4. AUTO RESUME
Return to previous mode, if no action for a period.
Turn the joystick Left/Right to set AUTO RESUME. Auto Resume is selectable from OFF,
After 30 sec, After 1 min, after 5 min, After 10 min, After 30 min and After 60 min. After
this period of time, speed dome will resume to the mode you set in “RESUME TO”. By
selecting OFF, this function will be disabled.
3.5.5. RESUME TO
Turn the joystick Left/Right to select the mode to resume to. It is selectable from PREV
59
Download from Www.Somanuals.com. All Manuals Search And Download.
MODE, POS.1 (H), TOUR1, PAT.1 and AUTOPAN.
3.5.6. POWER UP FUNC
Turn the joystick Left or Right to select the mode to return to when power failure occurs.
It is selectable from PREV MODE, POS.1 (H), TOUR1, PAT.1, AUTOPAN and OFF
3.5.7. AUTO FLIP
Select ON to enable Auto Flip function or select OFF to disable Auto Flip.
3.5.8. EXIT
Exit from the current menu.
3.6. ALARM
In main menu, turn joystick Up or Down to select ALARM. Turn joystick Left or Right to
enter ALARM sub-menu (see diagram 3.24)
ALARM INPUTS <┘
ALARM OUTPUTS <┘
MOTION DETECT <┘
EXIT
VIDEO SETTINGS
POSITIONS
OSD/AREAS
AUTO MODES
ALARM
PRIVATE ZONES
SYSTEM
INFO
EXIT
(diagram 3.24)
3.6.1. ALARM INPUTS
Press Enter key of keyboard to enter ALARM INPUTS sub-menu. (see diagram 3.25)
60
Download from Www.Somanuals.com. All Manuals Search And Download.
a. Go to INPUT NO. selection and turn the joystick Left/Right to select alarm input
number from 1 ~4.
b. Type: Select Normal Close (NC), Normal Open (NO), NIGHT NC, NIGHT NO, or OFF
for alarm type.
NC: Enable a normal close alarm input.
NO: Enable a normal open alarm input.
NIGHT NC: Set camera at night mode with normal close alarm input. When there is
event triggered, the camera will be changed to day mode.
NIGHT NO: Set camera at night mode with normal open alarm input. When there is
event triggered, the camera will be changed to day mode.
OFF: Disable alarm input.
ALARM INPUTS <┘
ALARM OUTPUTS <┘
MOTION DETECT <┘
EXIT
ALARM INPUTS
INPUT NO.
TYPE
1
NO
REACTION POSITION<┘
DURATION TIMEOUT<┘
PRIORITY 1234
1
5
RETURN
(diagram 3.25)
c. REACTION: The action will be taken when alarm is triggered.
OFF: No reaction will be taken when alarm is triggered.
POSITION: When the alarm is triggered, speed dome will go to the preset position.
Turn the joystick Left or Right to select on Position and press Enter key to select
position number. Turn joystick Left/Right to make selection. It is selectable from
1~192. Press Enter key again to confirm selection.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
PATTERN: When the alarm is triggered, speed dome will run the pattern. Turn the
joystick Left/Right to select on Pattern and press Enter key to select pattern number.
Turn joystick Left/Right to make selection. It is selectable from1~4. Press Enter key
again to confirm selection.
TOUR: When the alarm is triggered, speed dome will run the tour. Turn the joystick
Left or Right to select on Tour and press Enter key to select tour number. Turn joystick
Left or Right to make selection. It is selectable from1~16. Press Enter key again to
confirm selection.
d. DURATION: Duration of alarm input.
TIMEOUT: Turn the joystick Left or Right to select on TIMEOUT and press Enter key
to select time-out. Time-out is selectable from 1~99. Press Enter key again to confirm
selection.
LATCHED: Turn the joystick Left or Right to select on LATCHED. The alarm output
will not stop until there is any operation on keyboard.
TRANSPARENT: Turn the joystick Left or Right to select on TRANSPARENT. The
alarm output will not stop until the alarm is stopped.
e. PRIORITY: Turn the joystick Left or Right to select alarm input priority, it is selectable
from 1234/2341/3412/4123.
f. RETURN: Turn joystick Left/Right to return to previous menu.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
3.6.2. ALARM OUTPUTS
Press Enter key of keyboard to enter ALARM OUTPUTS sub-menu. (see diagram 3.26)
ALARM OUTPUT TRIGGER
ALARM INPUTS<┘
ALARM OUTPUTS <┘
OUTPUT NO
INPUT1
1
MOTION DETECT <┘
YES
YES
YES
YES
NO
EXIT
INPUT2
INPUT3
INPUT4
MOTION
SYSTEM ERROR NO
REMOTE
RETURN
NO
(diagram 3.26)
a. OUTPUT NUM: Select Output number from 1~2.
b. INPUT1: Select YES to enable Alarm input 1 for the alarm output selected. Select NO
to disable Alarm input 1.
c. INPUT2: Select YES to enable Alarm input 2 for the alarm output selected. Select NO
to disable Alarm input 2.
d. INPUT3: Select YES to enable Alarm input 3 for the alarm output selected. Select NO
to disable Alarm input 3.
e. INPUT4: Select YES to enable Alarm input 4 for the alarm output selected. Select NO
to disable Alarm input 4.
f. MOTION: Select YES to have alarm output triggered when a motion event is detected.
Select NO to disable this function.
g. SYSTEM ERROR: Select YES to have alarm output triggered when system error
occurs. Select NO to disable this function.
h. REMOTE: Select YES to have alarm output triggered when RS485 failure occurs.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Select NO to disable this function.
i. RETURN: RETURN to the previous menu.
3.6.3. MOTION DETECT
Press Enter key of keyboard to enter MOTION DETECT sub-menu. (see diagram 3.27)
ALARM INPUTS <┘
MOTION DETECT 1
SENSITIVITY
EXIT
OFF
50
ALARM OUTPUTS <┘
MOTION DETECT <┘
EXIT
(diagram 3.27)
a. Turn the joystick Left or Right to select ON for motion detection. A window as below
pops up.
MOTION DETECT INFO
M1: 67 M2: 87
(diagram 3.28)
b. SENSITIVITY: select motion detection sensitivity level from 1~100.
3.6.4. EXIT
Exit from the current menu.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
3.7. PRIVATE ZONES
In main menu, turn joystick Up/Down to select PRIVATE ZONES masking. Turn joystick
Left/Right to enter PRIVATE ZONE sub-menu (see diagram 3.29)
PRIVATE ZONE 1 ON <┘
PRIVATE ZONE 1 OFF
PRIVATE ZONE 1 OFF
PRIVATE ZONE 1 OFF
PRIVATE ZONE 1 OFF
PRIVATE ZONE 1 OFF
PRIVATE ZONE 1 OFF
PRIVATE ZONE 1 OFF
VIDEO SETTINGS
POSITIONS
OSD/AREAS
AUTO MODES
ALARM
PRIVATE ZONES
SYSTEM
INFO
EXIT
ZONE COLOR
EXIT
BLACK
(diagram 3.29)
a. ON: Turn joystick Left/Right to select ON/OFF. For private zone ON, press Enter key to
enter private zone position.
b. Turn the joystick and move to position (azimuth) of private zone. Press IRIS+ or IRIS-
key to set private zone size.
PRIVATE ZONE 1 SIZE
PRIVATE ZONE 1 POSITION
SET ZONE SIZE
MOVE TO POSITION
IRIS-: JOYSTICK FOR PTZ
IRIS+: SAVE AND RETURN
IRIS+/IRIS-: JOYSTICK FOR SET SIZE
(diagram 3.30)
65
Download from Www.Somanuals.com. All Manuals Search And Download.
c. Select the area to be covered first. Turn joystick Left/Right to adjust width of the private
zone area. Turn joystick Up or Down to adjust height of the private zone area. Press
IRIS- key to set private zone position. Press IRIS+ to save and return to previous
menu.
PRIVATE ZONE 1 ON <┘
PRIVATE ZONE 1 OFF
PRIVATE ZONE 1 OFF
PRIVATE ZONE 1 OFF
PRIVATE ZONE 1 OFF
PRIVATE ZONE 1 OFF
PRIVATE ZONE 1 OFF
PRIVATE ZONE 1 OFF
PRIVATE ZONE 1 SIZE
SET ZONE SIZE
IRIS-: JOYSTICK FOR PTZ
IRIS+: SAVE AND RETURN
ZONE COLOR
EXIT
BLACK
(diagram 3.31)
d. Zone color: select private zone area color.
e.
Exit: exit from current menu.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
3.8. SYSTEM
In main menu, turn joystick Up/Down to select SYSTEM. Turn joystick Left/Right to enter
SYSTEM sub-menu (see diagram 3.32)
VIDEO SETTINGS
POSITIONS
OSD/AREAS
AUTO MODES
ALARM
AUTO INIT
LANGUAGE
PASSWORD <┘
LOAD DEFAULT
RESTART
OFF
ENGLISH
[PUSH ENT]
[PUSH ENT]
PRIVATE ZONES
SYSTEM
EXIT
INFO
EXIT
(diagram 3.32)
a. AUTO INIT: Select auto initiation time from OFF, DAILY, WEEKLY. Speed dome will
automatically initiate and return to the previous position by maintaining all the settings
you have done.
b. LANGUAGE: Select language. The current version only supports English version.
c. PASSWORD: Press Enter key or turn joystick Left/Right to enter password sub-menu.
AUTO INIT
LANGUAGE
PASSWORD <┘
LOAD DEFAULT
RESTART
OFF
PASSWORD
ENGLISH
PASSWORD ACTIVE
ENTER PASSWORD
VERIFY PASSWORD
NO
XXXX
XXXX
[PUSH ENT]
[PUSH ENT]
EXIT
SAVE AND RETURN
RETURN
(diagram 3.33)
67
Download from Www.Somanuals.com. All Manuals Search And Download.
PASSWORD ACTIVE: Select YES to activate password mode. Select NO to disable
password mode.
ENTER PASSWORD: Enter the password
VERIFY PASSWORD: Enter the password again to confirm your input.
Press IRIS+ key to save and return to previous menu. Press IRIS- key to cancel.
SAVE AND RETURN: Turn joystick Left/Right to save the changes and return to previous
menu.
RETURN: Turn joystick Left/Right to return to previous menu without saving changes.
d. LOAD DEFAULT: Press Enter key to load default values, all values will return to factory
default value.
e. Restart: Press Enter key to restart the speed dome.
f. EXIT: Exit from current menu.
3.9. INFO
In main menu, turn joystick Up or Down to select INFO. Turn joystick Left or Right to enter
INFO sub-menu (see diagram 3.34)
EPTZ31 series
VERSION:
V1.0.0
AUTO
9600
001
PROTOCOL:
BAUDRATE:
RS-485-ID:
PRESET-CNT:
X-CONT:
0000000000
0000000001
0000000004
Y-CONT:
IRIS+: RETURN
(diagram 3.34)
a. VERSION: shows firmware version of this speed dome
b. PROTOCOL: shows protocol of this speed dome
68
Download from Www.Somanuals.com. All Manuals Search And Download.
c. BAUDRATE: shows baud rate of this speed dome
d. RS-485-ID: shows RS-485 ID of this speed dome
e. PRESET-CNT: Preset counter. This counter counts the preset movement, and 1 is
counted when the speed dome runs to preset position.
f. X-CONT: X-axis counter. This counter counts the x axis movement, and 1 is counted
when the speed dome pans 360°.
g. Y-CONT: Y-axis counter. This counter counts the y axis movement, and 1 is counted
when the speed dome tilts 180°.
h. Press IRIS+ key to return to previous menu.
3.10. EXIT
Exit from the current menu.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
4. EPTZ3100/3100I FUNCTION SETUP AND OPERATION
4.1. Manual Control Mode
ꢁ
Manual control: Shift Joystick Up/Down/Left/Right, and turn it
Clockwise/Counterclockwise to control speed dome.
Use the control keys which are Zoom, Focus and IRIS function keys on the
keyboard to Zoom In/Out, focus N (near)/F (Far), or IRIS +/-.
Note: Zoom In/Out control keys will be disabled when entering to OSD menu
mode.
ꢁ
HOME Mode: The camera view will go back to the home position when there is no
keyboard operation in a specific time. The home position and the specific time can
be set by pressing Set + Home.
If you set the time to 0 minute, then the camera will go back to home if there is no
keyboard operation in 5 seconds. This is the minimum no action time for HOME
mode.
Note: If "HOME" function is enabled, dome will go to home immediately after
powering on.
4.2. Auto Pan Mode
ꢁ
Two point auto pan: Press A.Pan to enter the auto pan mode, and then the system
will ask you to enter the auto pan speed (1~239). Press Enter to start auto pan.
In order to set the two points, press Set + A.Pan, and then enter the dwell time
(1~127 seconds) of each point. EPTZ3100 begins to pan from point A to point B
clockwise.
ꢁ
360°auto pan: Press Shift + A.Pan to enter the 360°auto pan. Sy stem will ask you
to enter 360°auto pan speed (1~239). The camera wi ll turn 360°automatically, but
not tilt.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3. Position Setting
ꢁ
Focus on a preset position: Press the number key, and then press Position to
focus on the number of preset position; or you can press Position, then enter the
preset position number, and then press Enter to focus on the number of preset
position.
ꢁ
Preset a position: Shift the Joystick to the position you would like to preset, and
then press Shift + Position. The system will ask you to enter the preset position
number (1~192), and then press Enter to save the position. There are up to 192
positions can be preset.
Three specific preset positions can be set as follows:
92 => Set Left Limit Stop (A position)
93 => Set Right Limit Stop (B position)
95 => Enter Menu mode (Use keyboard control keys to control OSD items; Focus F.
to go downward, Focus N. to go upward. IRIS + go to previous setting and IRIS – to
exit).
You can directly go to the following specific preset positions:
33 => Rotation of 180 degree
34 => Go to Home position (if Home Position is set by EVF Keyboard)
90 => Run tour (one-way)
91 => Run Pattern
94 => Initial
96 => Stop Scan
97 => Start running tour 1
98 => Frame scan (60 degree / step)
Default speed is 32. It can be changed by EVF Keyboard (Shift + A.Pan setting
71
Download from Www.Somanuals.com. All Manuals Search And Download.
speed.
Dwell time: default is 2 sec; It can be changed by EVF Keyboard Set + A.Pan
setting dwell time of A pos or B pos.
99 => Auto scan (360 degree)
Default speed is 32. It can be changed by EVF Keyboard (Shift + A.Pan setting
speed).
We can even set camera’s ICR Day/Night function with RS-485 command via
keyboard. How to do this? Press Position + 88 to link to Day mode or Position + 89
to link to Night mode, “ICR AUTO” message will be shown on the right-bottom part
of the screen. If OSD Day/Night ICR mode is “AUTO”, it cannot be controlled by
preset position setting.
ꢁ
Set the parameter of a preset position: Press Set + Position to set the parameter
of a preset position. You can set the going-to speed (1~239), dwell time (1~239
seconds), and the title of the position. Shift the joystick Right/Left to change bits,
and shift the Joystick Up/Down to change the alphanumeric characteristic. The
available alphanumeric characteristics are 0~9, A~Z, &, ?, !, :, ‘, ., ,, /, -, and a
space.
ꢁ
Delete a preset position: Press Clr + Position to delete a preset position. The
system will ask you to enter the position number that you would like to delete, and
then press Enter.
4.4. Tour Mode
In the tour mode, you can set a tour for viewing. There are 16 tours can be set, and 16
preset positions in a tour.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁ
One-way tour Mode: Press Tour to enter the tour mode. The system will ask you to
enter the tour number you would like to run, and starts the tour after pressing Enter.
To preset a tour before running is necessary.
Preset a one-way tour: Press Set + Tour to preset a one-way tour. The system will
ask you to enter preset position numbers (The positions need to be preset). After
finish entering all positions, press Stop to quit, and then press Enter to save the
tour.
ꢁ
To-and-fro tour mode: Press Shift + Tour to run a to-and-fro tour. The system will
ask you to enter the tour number you would like to run, and starts the tour after
pressing Enter. To preset a tour before running it is necessary.
Note 1: The difference between the One-way tour mode and To-and-fro tour mode is that
the return modes are different. For example: There is a tour with 3 preset positions 1, 2
and 3. The camera runs 1→2→3→1→2→3 in the One-way tour mode, and
1→2→3→2→1 in the To-and-fro tour mode.
Note 2: You could set a pattern tour. Press Set + Tour, and input 0, press Enter. Sway the
joystick to record the entire tour. Press Stop to stop recording tour. To view this pattern tour,
simply press Tour, and input tour number 0.
4.5. Alarm Link to a Position/Tour
EPTZ3100/EPTZ3100I have 4 alarm inputs that can be set to link to a position or a tour
when an alarm is triggered.
ꢁ
Set an alarm link:
Press F1 to set an alarm link. Enter the alarm number, and then press Enter.
Switch the Joystick up/down to select a position or a tour, enter a position or tour
number, and then press Enter to confirm the alarm link setting.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
If you set the position number to 99, the dome will do a 360 degree auto scan or
AB two point pan if limit is ON. If you set the position number to 98, the dome will do
a frame scan.
ꢁ
Delete an alarm link:
Press Clr + F1 to delete a link of alarm to position/tour.
Note 1: After alarm output signal is terminated, the speed dome will resume action
or return to its original position.
Note 2: After powering on the speed dome, it will detect alarm status automatically.
4.6. Other Operations
The EPTZ3100/EPTZ3100I can work with a DVR that has PTZ control functions, and
a matching protocol. The available control functions depend on different DVRs.
The EPTZ3100/EPTZ3100I can work with a keyboard that has PTZ control functions,
and a matching protocol. The available control functions depend on different
keyboards.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
EverFocus Electronics Corp.
Europe Office:
Head Office:
Albert-Einstein-Strasse 1
D-46446 Emmerich, Germany
TEL: +49(0)-2822-9394-0
FAX: +49(0)-2822-9394-95
12F, No.79 Sec. 1 Shin-Tai Wu Road,
Hsi-Chih, Taipei, Taiwan
TEL: +886-2-26982334
FAX: +886-2-26982380
China Office:
USA L.A. Office:
Room B-05D-1, KESHI PLAZA,
1801 Highland Ave. Unit A
Duarte, CA 91010, U.S.A.
TEL: +1-626-844-8888
FAX: +1-626-844-8838
Shangdi Information Industry Base,
Haidian District, Beijing China
100085
TEL: +86-10-62973336/37/38/39
FAX: +86-10-62971423
USA N.Y. Office:
415 Oser Avenue Unit S
Hauppauge, NY 11788
TEL: +1-631-436-5070
FAX: +1-631-436-5027
Japan Office:
1809 WBG MARIBU East 18F,
2-6 Nakase.Mihama-ku.
Chiba city 261-7118, Japan
TEL: +81-43-212-8188
FAX: +81-43-297-0081
Your EverFocus product is designed and
manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic
equipment, at their end-of-life, should be
disposed of separately from your household
waste.
Please, dispose of this equipment at your local
community waste collection/recycling centre.
In the European Union there are separate
collection systems for used electrical and
electronic product.
Please, help us to conserve the environment we
live in!
Ihr EverFocus Produkt wurde entwickelt und
hergestellt mit qualitativ hochwertigen Materialien
und Komponenten, die recycelt und wieder
verwendet werden können.
Dieses Symbol bedeutet, dass elektrische und
elektronische Geräte am Ende ihrer Nutzungsdauer
vom Hausmüll getrennt entsorgt werden sollen.
Bitte entsorgen Sie dieses Gerät bei Ihrer örtlichen
kommunalen Sammelstelle oder im Recycling
Centre.
Helfen Sie uns bitte, die Umwelt zu erhalten, in der
wir leben!
P/N: MW01G02400_Ver.A
Download from Www.Somanuals.com. All Manuals Search And Download.
|
COBY electronic Tablet MID9742 User Manual
Coleman Patio Furniture 2000009327 User Manual
Costar Carbon Monoxide Alarm P 1 User Manual
Craftsman Saw 31521477 User Manual
Dymo Label Maker 1755 User Manual
Eddie Bauer Car Seat 22859 User Manual
Electro Voice Portable Speaker BK 315 User Manual
EverFocus Home Security System EPTZ2700 User Manual
Fisher Price Motorized Toy Car 74598 User Manual
GE Washer 175D6444P001 User Manual