| 	
		 EPR200   
					Quick Installation Guide   
					About this manual   
					Before installing and using this unit, please read this   
					Manual carefully.   
					Date: Feb. 2006   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				Hardware System Requirements   
					Minimum   
					 
					 
					Intel® Pentium® III 800 MHz.   
					256 MB memory.   
					Used for such things as data backup.   
					 
					Recommended   
					 
					 
					 
					Intel Pentium 4 1.0 GHz.   
					512 MB memory.   
					Highly recommended for DVD+RW UDF format recording.   
					3 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				Using Your Drive   
					Busy Indicator   
					LED   
					Forced Eject   
					Hole   
					Disc Tray   
					Eject Button   
					Busy Indicator LED: Lights up when reading or writing data.   
					Eject Button: Press to load or unload a disc.   
					Disc Tray: Open or close by pressing the eject button. Load discs into the tray with   
					the label side facing up.   
					Forced Eject Hole: If the eject button will not open the tray, insert a stiff rod such as   
					a large paper clip into the hole and push in to eject the tray after the drive has been   
					turned off and the disc has stopped spinning.   
					About DVD Media Types   
					Media compatibility   
					Disc Types   
					EPR200 Supports   
					DVD+RW UDF format   
					Read (by connecting to a PC)   
					Write (from a DVR, EDR series)   
					4 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				Product Specifications   
					Read Speed:   
					Write Speed:   
					16x max. DVD-ROM and 48x max. CD-ROM   
					DVD+R: 16x max., DVD+RW: 8x max., DVD+R DL:   
					4x max., DVD-R: 16x max., DVD-RW: 6x max.,   
					CD-R: 48x max., CD-RW: 24x max.   
					120 ms (CD), 140 ms (DVD)   
					Access Time:   
					Mechanism:   
					Motorized tray load mechanism for horizontal   
					and vertical use   
					Audio:   
					Digital-out and line-out at the back (MPC compatible)   
					IDE/ATAPI   
					Interface:   
					Burst Transfer Rate:   
					Cache:   
					PIO mode 4/Ultra DMA 33   
					2 MB   
					Compatibility:   
					MPC level 3, Multi Read, PC2001   
					Media/Modes Supported:   
					DVD-ROM, DVD-R, DVD-RW,   
					DVD+R, DVD+R DL, DVD+RW, DVD-Video,   
					CD-ROM, CD-ROM XA, CD-Audio, CD Extra, CD   
					Text, CD-I Ready, CD-Bridge, Photo-CD, VideoCD,   
					Hybrid CD   
					Writing Methods:   
					DAO (disc at once), SAO (session at once), TAO (track   
					at once) with zero gap, variable or fixed packet,   
					multisession   
					Dust Protected Enclosure   
					Forced Eject Hole   
					5 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				Copying Video from DVR to EPR200   
					EPR200 allows you to copy an image or video from the DVR. (Only EDR series’   
					DVR is supported)   
					 
					Connect the USB connector into the USB slot on the front panel or back panel of   
					the DVR to copy.   
					Back panel of EPR200   
					USB connector   
					Front panel of DVR (EDR series with USB slot)   
					6 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				 
					Now, you need to copy image (video) and EDR Viewer which is the image   
					(video) player from DVR.   
					Press COPY key from the front panel of DVR and then the   
					COPY   
					copy menu appears.   
					In the COPY MENU, we define:   
					COPY: Select Image (video) for copying images to movie file.   
					Select Viewer for copying EDR viewer player.   
					DISK NO: Disk number. It is fixed as “01” in this series.   
					CAMERA NO: Camera channel number. You can select the video of camera you   
					would like to copy.   
					START DATE & TIME: The start time of video you want to copy.   
					END DATE & TIME: The end time of video you want to copy.   
					DEVICE: The media (USB/CF) you wish to store the file.   
					Press SELECT to copy after setting up everything.   
					7 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				Viewing a Copied File   
					 
					First Step is to open the viewer that you copied from DVR. Insert the DVD-RW   
					to your PC, and choose the appropriate drive, double-click on “EDRViewer.exe”   
					to open the viewer.   
					8 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				 
					Once the viewer is opened, click on “Load file” to load the archived EDR MPEG   
					Files (.arv) that you just copied from DVR. Then, click on “Open”, and it will   
					start to play the video automatically.   
					9 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				 
					 
					 
					 
					Press STOP button whenever you would like to stop playing the video.   
					Press PLAY button whenever you would like to play the video again.   
					Press PAUSE button whenever you would like to pause the playing video.   
					During playback mode, press PAUSE button to freeze the playing back picture.   
					Press << STEP for reverse playback, or press STEP>> for slow forward. Or you can   
					simply drag the slide bar to the position where you would like to view the image.   
					10   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				 
					The option “CAPTURE” allows you to capture a specific still image that you   
					copied.   
					Press CAPTURE button, and the instant image will be captured, save the image   
					as .jpg file to your desired file location.   
					11   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				 
					The option “Save to AVI” allows you to convert automatically the .arv file to   
					AVI file, which is a convenient way for most PC users.   
					Press Save to AVI button, and the copied .arv file will be converted and saved to   
					your desired file location.   
					Note: Viewer is only supported by Windows XP. If you have other PC system than   
					Windows XP, you would need to setup a burning software first in order to download   
					the viewer.   
					12   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				Disc Care   
					¾ 
					¾ 
					To clean the disc, use a soft cloth and wipe from the inside to the outside edge   
					rather than in a circular motion.   
					Do not use record-cleaning or anti-static agents as the solutions may damage a   
					disc.   
					¾ 
					¾ 
					Always store discs in proper storage cases when not in use.   
					Check for dirt, dust, or fingerprints on a disc’s recording side before inserting   
					into the unit.   
					¾ 
					¾ 
					¾ 
					¾ 
					¾ 
					Avoid touching or scratching the recording side of the disc.   
					Hold the disc only by the edges or by the center hole and one edge.   
					Do not affix stickers, labels, or tape to the disc.   
					Discard warped or cracked discs as they may cause damage to the drive.   
					Avoid unusually shaped discs such as “business card” CDs.   
					13   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				Troubleshooting & Technical Support   
					Nothing happens when eject button is pressed:   
					¾ 
					¾ 
					Make sure the power cable is securely connected to the drive.   
					Verify the computer is powered-up and running.   
					Drive is very loud when reading/writing:   
					¾ 
					Make sure the drive is securely mounted to the computer’s chassis. Excessive   
					vibration can be caused by loose or uneven mounting.   
					Still having problems?   
					¾ 
					
					+886-2-26982334for assistance.   
					14   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				EverFocus Electronics   
					Corp.   
					Head Office:   
					China Office:   
					12F, No.79 Sec. 1 Shin-Tai Wu Road,   
					Hsi-Chih, Taipei, Taiwan   
					TEL: +886-2-26982334   
					FAX: +886-2-26982380   
					
					Room 609, Technology Trade Building,   
					Shandgdi Information Industry Base,   
					Haidian District, Beijing,China   
					TEL: +86-10-62971096   
					FAX: +86-10-62971432   
					
					USA Office:   
					1801 Highland Ave. Unit A   
					Duarte, CA 91010, U.S.A.   
					TEL: +1-626-844-8888   
					FAX: +1-626-844-8838   
					
					Japan Office:   
					1809 WBG MARIBU East 18F,   
					2-6 Nakase.Mihama-ku.   
					Chiba city 261-7118, Japan   
					TEL : +81-43-212-8188   
					European Office:   
					Albert-Einstein-Strasse 1   
					D-46446 Emmerich, Germany   
					TEL: 49-2822-9394-0   
					
					Ihr EverFocus Produkt wurde entwickelt und   
					Your EverFocus product is designed and   
					hergestellt mit qualitativ hochwertigen Materialien   
					und Komponenten, die recycelt und wieder   
					verwendet werden können.   
					manufactured with high quality materials and   
					components which can be recycled and reused.   
					This symbol means that electrical and electronic   
					equipment, at their end-of-life, should be   
					Dieses Symbol bedeutet, dass elektrische und   
					® 
					EverFocus   
					P/N: MPR2G00100   
					15   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				 |