Variable Speed Quad Blade
Food Processor
OWNER’S MANUAL
Model FP86
120V., 60Hz., 800 Watts
EURO-PRO OPERATING LLC
Boston, MA, 02465
1 (800) 798-7398
COPYRIGHT © EURO-PRO OPERATING LLC 2008
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING TO KNOW YOUR
Assembly Instructions
VARIABLE SPEED QUAD BLADE FOOD PROCESSOR
Before using your food processor for
PROTECTIVE
BLADE
COVERS
the first time, do the following:
1. Read all the instructions in this
instruction manual.
2. Remove the unit from packaging.
Warning: BLADES ARE VERY
SHARP! Take extra care when
removing the protective blade
covers to prevent injuries.
Fig. 2
Important Note: Always replace the
protective blade covers onto the blades
when the blades are not in use.
UPPER
CHOPPING
BLADE
CAUTION!
BLADES
ARE
3. Wash the unit and attachments
according to the “Maintenance &
Cleaning” section. DO NOT
SHARP!
IMMERSE MAIN UNIT IN WATER.
4. Once the unit has been thoroughly
cleaned, it is ready for assembly
and use.
LOWER
CHOPPING
BLADE
Assembling the Food Processor
Fig. 3
The food processor can be used either
with both the upper and lower chopping
blades or just the lower chopping
blade. The food processor can also use
either of the blade holders instead of
the chopping blades.
•
After having assembled the chop-
ping blades, carefully place the
chopping blade assembly onto the
shaft of the food processor bowl.
(Fig. 4) Ensure that the blades are
securely in place before continuing.
SPEED AND PULSE
1. Food Pusher
2. Feeder Tube
CONTROL
3. Food Processor Bowl
4. Suction Feet
5. Speed and Pulse Control
6. Blade Storage Compartment
7. Food Processor Lid
8. Blade Holder
Note: Before assembling the food
processor, ensure that it is NOT
plugged into an electrical outlet.
Speed
Control
Dial
CHOPPING
BLADE
Assembling Both Chopping Blades
ASSEMBLY
•
Place the food processor bowl
securely on the main body. (Fig. 1)
9. French Fry Blade Holder
10. Thin Shredding Blade
11. Thick Shredding Blade
12. Thin Slicing Blade
13. Thick Slicing Blade
14. Grating Blade
15. Upper Chopping Blade
16. Blade Covers (x2)
17. Lower Chopping Blade
18. Spatula
OFF to
MAX
FOOD
PROCESSOR
BOWL
FOOD
PROCESSOR
Pulse Button
Fig. 4
SHAFT
Fig. 1
MAIN BODY
Technical Specification
•
Once the food processor bowl is
securely in place, remove the
protective blade covers and carefully
assemble the upper and lower chopping
blades. (Fig. 2 & 3)
Voltage:
Power:
120V., 60Hz.
800 Watts
Food Processor Capacity: 6 cups (1.5 L)
* Illustrations may differ from actual product.
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly Instructions
Operating Instructions
Using the Lower Chopping Blade
Only
2. Plug in the processor and turn the
Caution: Handle blade carefully to
avoid cuts and injuries.
Speed Control Dial
The speed control dial has the following
speed settings:
speed control dial to the desired
speed level. If the processor does
not come on check that the lid are
correctly fitted and locked into
place.
•
Place the food processor bowl
securely on the main body. (Fig. 1)
BLADE
•
Off: Turn the speed control dial to
“Off” in order to stop the food
processor from operating.
•
Once the food processor bowl is
securely in place, remove the
protective blade cover from the
lower chopping blade and carefully
place the lower chopping blade onto
the shaft the food processor bowl.
(Fig. 4)
Important Note: The unit will NOT
operate without the lid locked into
place.
•
1 to 9: Speed levels may be
increased from 1 to 9. The speed can
be adjusted while the food processor
is in use.
3. Use the food pusher when putting
food into the feeder tube. (Fig. 10)
For safety reasons it is always
better to use the food pusher,
and to NEVER feed food by hand.
BLADE
TAB
•
•
Max: Highest level of speed that the
food processor can operate at.
Assembling the French Fry Blade
Holder
PULSE: Use of the “PULSE” button
allows greater control over the texture
of the food being processed. Use
"PULSE" when the unit is in the "Off"
position.
•
Place the food processor bowl
securely on the main body. (Fig. 1)
Fig. 6
Caution: DO NOT operate the unit for
intervals longer than 20 seconds. If
longer chopping or mixing is required,
run for 20 seconds, allow motor to stop
and run again for another 20 seconds.
•
Once in place, use thumb to press
on the base of the blade to snap it
into place. (Fig. 7) Ensure that the
blade holder is securely in place
before continuing.
•
Once the food processor bowl is
securely in place, insert the french
fry blade holder into the shaft of the
food processor. (Fig. 5) Ensure that
the blade holder is securely in place
before continuing.
Caution: The "PULSE" function is only
intended to be used for short periods of
time. Damage to the unit may occur if not
used properly.
Caution: Handle blade carefully to
avoid cuts and injuries.
Important Note: The french fry blade
cannot be removed. If wanting to use a
different blade refer to the following
section.
Operating the Food Processor
Once having assembled the food
processor according to the “Assembly
Instructions” the unit is now ready for
use.
FOOD
PUSHER
FRENCH
FRY BLADE
HOLDER
PRESS
ON THE
BASE OF
THE
BLADE
TO SNAP
IT INTO
PLACE
FEEDER
TUBE
1. Place the lid on top of the food
processor bowl. Once in place twist it
to the left so that it is locked securely.
(Fig. 9)
Note: Until the lid is securely in place,
ensure that the unit is NOT plugged
into an electrical outlet.
Fig. 10
FOOD PROCESSOR SHAFT
Fig. 5
Fig. 7
4. When finished using the food
processor, turn the speed control
dial to the “Off” position and unplug
it from the electrical outlet.
TWIST THE LID TO THE LEFT
TO LOCK INTO PLACE
•
To remove the blade from the blade
holder, push the blade from the
back of the blade holder. (Fig. 8)
Using the Blade Holder
•
Place the food processor bowl
securely on the main body. (Fig. 1)
•
Select the desired blade. There are
five (5) different blades to choose
from:
BACK OF
BLADE
HOLDER
1. Thin Shredding Blade
2. Thick Shredding Blade
3. Thin Slicing Blade
4. Thick Slicing Blade
5. Grating Blade
PRESS
DOWN ON
BACK OF
BLADE
Fig. 9
•
To attach the blade to the blade
holder, take the blade holder in one
hand and insert the blade tab first
into the opening. (Fig. 6)
Fig. 8
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Processing Examples
Maintenance & Cleaning Instructions
Processing Examples with the Upper and Lower Chopping Blades
Cleaning and Maintenance
Using the Storage Compartment
The processing times indicated below are approximate and also depend on the
quantity of the food to be processed and the degree of fineness you require.
The food processor comes with a blade
storage compartment.
Caution: Make sure that the unit is
unplugged from the power source and
the speed control dial is in the “OFF”
position before inserting or removing
attachments.
1. Press down and pull back on the
locking latch of the storage
compartment. (Fig. 11)
PRODUCT
QUANTITY
RECOMMENDED
SPEED
OPERATION TIMES
(used in 10 - 20 second intervals)
•
•
•
Never immerse the unit, cord or
plug in water or any other liquid.
MEAT*
ONIONS
24.5 oz / 700 gr.
24.5 oz / 700 gr.
21 oz / 600 gr.
24.5 oz / 700 gr.
24.5 oz / 700 gr.
24.5 oz / 700 gr.
24.5 oz / 700 gr.
4 SLICES
MAX
5 - 6
15 - 30 SECONDS
15 - 30 SECONDS
15 - 30 SECONDS
15 - 30 SECONDS
15 – 30 SECONDS
10 – 20 SECONDS
30 SECONDS
Clean the main unit with a damp
cloth only.
Locking
Latch
NUTS
8-MAX
1 - 8
Use extreme caution when
cleaning the chopping blade as
the blades are very sharp.
FISH*
CHEESE
4 - 8
LIQUIDS (SOUPS)
CARROTTS
BREAD
1 - 8
•
•
All other parts can be cleaned in
warm sudsy water using regular
dishwashing liquid.
6 - 8
Fig. 11
6 - 8
15 – 30 SECONDS
15 – 30 SECONDS
15 – 30 SECONDS
If food has spilled over on to the
main unit, use the pointy end of the
spatula to clean the cracks and
crevices of the base under the food
processor bowl.
APPLES
24.5 oz / 700 gr.
MAX 4 BUNDLES
8 – MAX
MAX
2. Each blade is assigned a letter (A
through E) and has a slot
corresponding to that letter. Store
each blade in the corresponding
slot.
PARSLEY
Hints & Tips for Chopping Blades
•
The lid and protective blade guards
may be washed in lukewarm water
and a mild dishwashing liquid. DO
NOT place these in the dish-
washer.
•
•
•
•
Use both chopping blades for meats, fish, vegetables, cheese, etc. and have the
speed level set to “Max”.
For finer chopping, increase the length of time you process. DO NOT exceed
processing times of more than 20 seconds per processing interval.
For coarser chopping, use the “PULSE” button for a few seconds and monitor food
texture.
Pre-cut larger pieces to make them fit into the feeder tube. When chopping hard
foods (e.g. meat, cheese) cut into 1-inch (2.4 cm) cubes.
Processing Examples for Blades
Recommended speed for processing with chopping blades is High.
Thin
Shredding
(carrots,
potatoes,
cucumbers,
cabbage,
Thick
Shredding
(Lettuce,
carrots,
onions, soft
cheeses)
Thick
Thin
Slicing
(Carrots,
cucumbers,
raw potatoes,
lettuce)
Grating
(Hard
Cheeses)
French Fry
(Potatoes)
Slicing
(Cabbage,
carrots,
onions)
soft cheeses)
Hints & Tips for Blades
•
•
•
For shredding, place food horizontally into the feeder tube.
For slicing, place the food vertically.
If grating potatoes or apples, add 1 tsp of lemon juice to prevent them from turning
black. Potatoes can be sliced using the thin slicing blade for chips or use the large
french fry blade if making french fries.
7
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Model FP86
ONE (1) YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from defects in material and
workmanship for a period of one (1) year from the date of purchase when utilized for normal
household use.
If your appliance fails to operate properly while in use under normal household conditions within
the warranty period, return the complete appliance and accessories, freight prepaid. For
If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC
will repair or replace it free of charge. Proof of purchase date must be included.*
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or
replacement of the unit at our option. This warranty does not cover normal wear of parts and
does not apply to any unit that has been tampered with or used for commercial purposes. This
limited warranty does not cover damage caused by misuse, abuse, negligent handling or
damage due to faulty packaging or mishandling in transit.
This warranty is extended to the original purchaser of the unit and excludes all other legal and/or
conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the
specific obligations expressly assumed by it under the terms of the limited warranty. In no event
is EURO-PRO Operating LLC liable for incidental or consequential damages of any nature
whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential
damages, so the above may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
*Important: Carefully pack item to avoid damage in shipping. Be sure to include proof of
purchase date and to attach tag to item before packing with your name, complete address
and phone number with a note giving purchase information, model number and what you
believe is the problem with item. We recommend you insure the package (as damage in
shipping is not covered by your warranty). Mark the outside of your package “ATTENTION
CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the
specifications contained herein are subject to change without notice.
OWNERSHIP REGISTRATION CARD
FOR CANADIAN CONSUMERS ONLY
Please fill out and mail the product registration card within ten (10) days of purchase. The
registration will enable us to contact you in the unlikely event of a product safety notification. By
returning this card you acknowledge to have read and understood the instructions for use, and
warnings set forth in the accompanying instructions. RETURN TO:
EURO-PRO OPERATING LLC, 4400 Bois Franc, St. Laurent, Qc, H4S 1A7
_F__P_8_6_______________________________________________________________________
Appliance model
____________________________________________________________________________
Date purchased
Name of store
____________________________________________________________________________
Owner’s name
____________________________________________________________________________
Address
City
Prov.
Postal Code
Printed in Turkey
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|