SELF-CLEANING
ELECTRIC
CONVECTION RANGE
Use & Care Guide
For questions about features, operation/performance
parts, accessories or service, call: 1-800-253-1301
or visit our website at...
Table of Contents................................................. 2
9782188A
Download from Www.Somanuals.com. All Manuals Search And Download.
RANGE SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or
“WARNING.” These words mean:
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.
The Anti-Tip Bracket
The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without the
anti-tip bracket fastened down properly.
WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Connect anti-tip bracket to rear range foot.
Reconnect the anti-tip bracket, if the range is moved.
See the installation instructions for details.
Failure to follow these instructions can result in death or serious burns to children
and adults.
Anti-Tip Bracket
Making sure the anti-tip bracket is installed:
• Slide range forward.
• Look for the anti-tip bracket securely attached to floor.
• Slide range back so rear range foot is under anti-tip bracket.
Range Foot
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical
I
Use Proper Pan Size – The range is equipped with
one or more surface units of different size. Select
utensils having flat bottoms large enough to cover
the surface unit heating element. The use of under-
sized utensils will expose a portion of the heating
element to direct contact and may result in ignition
of clothing. Proper relationship of utensil to burner
will also improve efficiency.
shock, injury to persons, or damage when using the
range, follow basic precautions, including the
following:
I
WARNING: TO REDUCE THE RISK OF
TIPPING OF THE RANGE, THE RANGE MUST BE
SECURED BY PROPERLY INSTALLED ANTI-TIP
DEVICES. TO CHECK IF THE DEVICES ARE
INSTALLED PROPERLY, SLIDE RANGE FORWARD,
LOOK FOR ANTI-TIP BRACKET SECURELY
ATTACHED TO FLOOR, AND SLIDE RANGE BACK
SO REAR RANGE FOOT IS UNDER ANTI-TIP
BRACKET.
I
I
Never Leave Surface Units Unattended at High Heat
Settings – Boilover causes smoking and greasy
spillovers that may ignite.
Make Sure Reflector Pans or Drip Bowls Are in
Place – Absence of these pans or bowls during
cooking may subject wiring or components under-
neath to damage.
I
CAUTION: Do not store items of interest to
children in cabinets above a range or on the back-
guard of a range – children climbing on the range to
reach items could be seriously injured.
I
I
I
Protective Liners – Do not use aluminum foil to line
surface unit drip bowls or oven bottoms, except as
suggested in the manual. Improper installation of
these liners may result in a risk of electric shock, or
fire.
I
Proper Installation – Be sure the range is properly
installed and grounded by a qualified technician.
I
Never Use the Range for Warming or Heating the
Room.
Glazed Cooking Utensils – Only certain types of
glass, glass/ceramic, ceramic, earthenware, or other
glazed utensils are suitable for range-top service
without breaking due to the sudden change in
temperature.
I
Do Not Leave Children Alone – Children should not
be left alone or unattended in area where the range
is in use. They should never be allowed to sit or
stand on any part of the range.
Utensil Handles Should Be Turned Inward and Not
Extend Over Adjacent Surface Units – To reduce the
risk of burns, ignition of flammable materials, and
spillage due to unintentional contact with the utensil,
the handle of a utensil should be positioned so that
it is turned inward, and does not extend over
adjacent surface units.
I
Wear Proper Apparel – Loose-fitting or hanging
garments should never be worn while using the
range.
I
User Servicing – Do not repair or replace any part of
the range unless specifically recommended in the
manual. All other servicing should be referred to a
qualified technician.
I
I
Do Not Soak Removable Heating Elements –
Heating elements should never be immersed in
water.
I
Storage in or on the Range – Flammable materials
should not be stored in an oven or near surface
units.
Do Not Cook on Broken Cooktop – If cooktop
should break, cleaning solutions and spillovers may
penetrate the broken cooktop and create a risk of
electric shock. Contact a qualified technician
immediately.
I
Do Not Use Water on Grease Fires – Smother fire or
flame or use dry chemical or foam-type extinguisher.
I
Use Only Dry Potholders – Moist or damp
potholders on hot surfaces may result in burns from
steam. Do not let potholder touch hot heating
elements. Do not use a towel or other bulky cloth.
I
Clean Cooktop With Caution – If a wet sponge or
cloth is used to wipe spills on a hot cooking area,
be careful to avoid steam burn. Some cleaners can
produce noxious fumes if applied to a hot surface.
I
DO NOT TOUCH SURFACE UNITS OR AREAS
NEAR UNITS – Surface units may be hot even
though they are dark in color. Areas near surface
units may become hot enough to cause burns.
During and after use, do not touch, or let clothing or
other flammable materials contact surface units or
areas near units until they have had sufficient time
to cool. Among those areas are the cooktop and
surfaces facing the cooktop.
I
I
Use Care When Opening Door – Let hot air or
steam escape before removing or replacing food.
Do Not Heat Unopened Food Containers – Build-up
of pressure may cause container to burst and result
in injury.
SAVE THESE INSTRUCTIONS
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
For self-cleaning ranges –
I Keep Oven Vent Ducts Unobstructed.
I Do Not Clean Door Gasket – The door gasket is
essential for a good seal. Care should be taken not
to rub, damage, or move the gasket.
I Placement of Oven Racks – Always place oven
racks in desired location while oven is cool. If rack
must be moved while oven is hot, do not let
potholder contact hot heating element in oven.
I Do Not Use Oven Cleaners – No commercial oven
cleaner or oven liner protective coating of any kind
should be used in or around any part of the oven.
I DO NOT TOUCH HEATING ELEMENTS OR
INTERIOR SURFACES OF OVEN – Heating
elements may be hot even though they are dark in
color. Interior surfaces of an oven become hot
enough to cause burns. During and after use, do
not touch, or let clothing or other flammable
materials contact heating elements or interior
surfaces of oven until they have had sufficient time
to cool. Other surfaces of the appliance may
become hot enough to cause burns – among these
surfaces are oven vent openings and surfaces near
these openings, oven doors, and windows of oven
doors.
I Clean Only Parts Listed in Manual.
I Before Self-Cleaning the Oven – Remove broiler pan
and other utensils.
For units with ventilating hood –
I Clean Ventilating Hoods Frequently – Grease should
not be allowed to accumulate on hood or filter.
I When flaming foods under the hood, turn the fan on.
SAVE THESE INSTRUCTIONS
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list
of substances known to the State of California to cause cancer, birth defects, or other reproductive harm, and
requires businesses to warn of potential exposure to such substances.
WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects, or
other reproductive harm.
This appliance can cause low-level exposure to some of the substances listed, including benzene, formaldehyde,
carbon monoxide, and toluene.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS AND FEATURES
This manual covers several different models. The range you have purchased may have some or all of the parts and features listed. The
location and appearance of the features shown here may not match those of your model.
Control Panel
1
2
3
4
OFF
OFF
HI
HI
LO
LO
CONVECTION FAN
ON
OFF
2
8
2
8
3
3
7
7
OVEN LIGHT
OFF
OFF
ON
OFF
HI
HI
LO
LO
4
8
6
4
6
2
5
5
2
8
3
3
7
7
4
6
4
6
PUSH TO TURN
PUSH TO TURN
5
5
6
7
8
9
1. Surface Cooking Area Locator
2. Electronic Oven Control
3. Convection Fan Switch
4. Surface Heating Indicator Light
5. Left Front Control Knob
6. Left Rear Control Knob
7. Manual Oven Light Switch
8. Right Rear Control Knob
9. Right Front Control Knob
Range
7
1
2
8
9
13
10
11
12
3
4
5
6
1. Oven Vent
5. Model and Serial Number
(behind left side of storage
drawer)
6. Storage Drawer
7. Control Panel
8. Ceramic Glass
9. Hot Surface Indicator
Parts and Features not
shown
Oven Door Window
Oven Light
Broiler Pan and Grid
Roasting Rack
Light
2. Surface Cooking Area
3. Anti-Tip Bracket
4. Door Stop Clip
10. Door Gasket
11. Broil Element (not shown)
12. Bake Element
13. Clean Latch
6
Download from Www.Somanuals.com. All Manuals Search And Download.
COOKTOP USE
Cooktop Controls
Ceramic Glass
The surface cooking area will glow red when an element is on. It
will cycle on and off, at all settings, to maintain the selected heat
level.
WARNING
It is normal for the surface of white ceramic glass to appear to
change color when surface cooking areas are hot. As the glass
cools, it will return to its original color.
Wiping off the cooktop before and after each use will help keep it
free from stains and provide the most even heating. For more
information, see “General Cleaning” section.
I
Do not store jars or cans above the cooktop. Dropping a
heavy or hard object onto the cooktop could crack it.
I
Do not leave a hot lid on the cooktop. As the cooktop cools,
air can become trapped between the lid and the cooktop, and
the ceramic glass could break when the lid is removed.
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
I
For foods containing sugar in any form, clean up all spills and
soils as soon as possible. Allow the cooktop to cool down
slightly. Then, while wearing oven mitts, remove the spills
while the surface is still warm. If sugary spills are allowed to
cool down, they can adhere to the cooktop and can cause
pitting and permanent marks.
The control knobs can be set anywhere between HI and LO. Push
in and turn to setting. On some models, the surface cooking area
locator shows which element is turned on. Use the following chart
as a guide when setting heat levels.
I
I
I
Do not slide cookware or bakeware across the cooktop.
Aluminum or copper bottoms and rough finishes on cookware
or bakeware could leave scratches or marks on the cooktop.
SETTING
HI
RECOMMENDED USE
I
I
Start food cooking.
Bring liquid to a boil.
Do not cook popcorn in prepackaged aluminum containers on
the cooktop. It could leave aluminum marks that cannot be
removed completely.
6-8
[MED- HI]
I
I
Hold a rapid boil.
Do not allow objects that could melt, such as plastic or
aluminum foil, to touch any part of the entire cooktop.
Quickly brown or sear food.
I
I
Do not use the cooktop as a cutting board.
5
I
I
I
Maintain a slow boil.
Use cookware about the same size as the surface cooking
area. Cookware should not extend more than 1 in. (2.5 cm)
outside the area.
[MED]
Fry or sauté foods.
Cook soups, sauces and gravies.
2-4
[MED- LO]
I
I
Stew or steam food.
Simmer.
LO
I
I
Keep food warm.
Melt chocolate or butter.
REMEMBER: When range is in use or (on some
models) during the Self-Cleaning cycle, the entire
cooktop area may become hot.
1. Surface Cooking Area
2. Cookware/Canner
3. 1 in. (2.5 cm) Maximum Overhang
I
I
Use flat-bottomed cookware for best heat conduction and
energy efficiency. Cookware with rounded, warped, ribbed or
dented bottoms could cause uneven heating and poor
cooking results.
Determine flatness by placing the straight edge of a ruler
across the bottom of the cookware. While you rotate the ruler,
no space or light should be visible between it and the
cookware.
I
I
Cookware designed with slightly indented bottoms or small
expansion channels can be used.
Make sure the bottoms of pots and pans are clean and dry
before using them. Residue and water can leave deposits
when heated.
I
Do not cook foods directly on the cooktop.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Hot Surface Indicator Light (under ceramic glass)
The hot surface indicator light will glow as long as any surface
cooking area is too hot to touch, even after the surface cooking
area(s) is turned off.
Cookware
IMPORTANT: Never leave empty cookware on a hot surface
cooking area, element or surface burner.
Ideal cookware should have a flat bottom, straight sides, a well-
fitting lid and the material should be of medium-to-heavy
thickness.
HOT
Rough finishes may scratch the cooktop. Aluminum and copper
may be used as a core or base in cookware. However, when used
as a base they can leave permanent marks on the cooktop or
grates.
CHAUD
Cookware material is a factor in how quickly and evenly heat is
transferred, which affects cooking results. A nonstick finish has
the same characteristics as its base material. For example,
aluminum cookware with a nonstick finish will take on the
properties of aluminum.
Use the following chart as a guide for cookware material
characteristics.
Home Canning
When canning for long periods, alternate the use of surface
cooking areas, elements or surface burners between batches.
This allows time for the most recently used areas to cool.
I
Center the canner on the grate or largest surface cooking area
or element. Canners should not extend more than 1 in. (2.5
cm) outside the cooking area.
COOKWARE
Aluminum
CHARACTERISTICS
I
Do not place canner on 2 surface cooking areas, elements or
surface burners at the same time.
I
I
I
Heats quickly and evenly.
I
I
On ceramic glass models, use only flat-bottomed canners.
Suitable for all types of cooking.
On coil element models, the installation of a Canning Unit Kit
is recommended. If a kit is not installed, the life of the coil
element will be shortened. See “Assistance or Service” for
ordering instructions.
Medium or heavy thickness is best for
most cooking tasks.
Cast iron
I
I
I
Heats slowly and evenly.
I
For more information, contact your local U.S. Government
Agricultural Department Extension Office. In Canada, contact
Agriculture Canada. Companies that manufacture home
canning products can also offer assistance.
Good for browning and frying.
Maintains heat for slow cooking.
Ceramic or
Ceramic glass
I
I
I
Follow manufacturer’s instructions.
Heats slowly, but unevenly.
Ideal results on low to medium heat
settings.
Copper
I
Heats very quickly and evenly.
Earthenware
I
I
Follow manufacturer’s instructions.
Use on low heat settings.
Porcelain
enamel-on-
steel or cast
iron
I
See stainless steel or cast iron.
Stainless steel
I
I
Heats quickly, but unevenly.
A core or base of aluminum or copper
on stainless steel provides even
heating.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRONIC OVEN CONTROL
1
2
10
9
8
7
6
5
4
3
1. Oven Display
2. Clock
3. Timer/Cancel
4. Start/Enter
(Control Lock)
5. Auto Clean
6. Off/Cancel
7. Temperature/Time
8. Cook Time
9. Start Time
10. Custom Broil
11. Bake
Oven Indicator Lights
Off/Cancel
The indicator lights are located along all four sides of the display.
The indicator lights light up or flash when the oven is in one of the
following modes: Bake, Broil, Clean (on some models), On, Start?,
Controls Locked, Door Locked (on some models), Delay, Timer,
Temp, Cook Time, or Start Time.
The OFF pad stops any function except the Clock, Timer and
Control Lock.
The cooling fan may continue to operate after an oven function
has been canceled, depending on oven temperature.
Clock
Display
This is a 12-hour clock and does not show a.m. or p.m.
When power is first supplied to the appliance, “PF” will appear on
the display. Press OFF to clear.
If “PF” appears at any other time, a power failure has occurred.
Press OFF and reset the clock if needed.
When the oven is in use, the display shows preheat time and the
temperature and oven setting.
When the oven is not in use, the display shows the time of day.
When using START TIME/COOK TIME, the display will show either
hours and minutes, or minutes and seconds.
To Set:
Before setting, make sure the oven and Timer are off.
1. Press CLOCK.
2. Press the TEMP/TIME “up” or “down” arrow pad to set the
time of day.
3. Press START/ENTER or CLOCK.
When setting a function, if START/ENTER is not pressed, and after
5 seconds, the “START?” oven indicator light will flash. Press
START/ENTER, or after 5 minutes, the set function will be
canceled.
Timer
The Timer can be set in hours or minutes up to 12 hours and 59
minutes and counts down the set time.
NOTE: The Timer does not start or stop the oven.
Start/Enter
To Set:
1. Press TIMER •• CANCEL.
The START/ENTER pad begins any oven function except the
Timer. On some models, if pad is not pressed within 5 seconds
after pressing a function pad, the “Start?” indicator light will flash
as a reminder. On some models, “START?” will appear on the
display.
The timer oven indicator light will light up.
2. Press the TEMP/TIME “up” or “down” arrow pad to set the
length of time.
3. Press START/ENTER.
If not pressed within 4 to 5 minutes (depending on your model)
after pressing a function pad, the oven display will return to the
time of day mode and the programmed function will be canceled.
When the set time ends, four 1-second tones will sound.
4. Press TIMER •• CANCEL anytime to cancel the timer and/or
stop reminder tones.
To cancel the timer during the countdown, press TIMER ••
CANCEL twice.
The time can be reset during the countdown by repeating the
above steps.
To display the time of day when the timer is counting down, press
CLOCK.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Lock
OVEN USE
The Control Lock shuts down the control panel pads to prevent
unintended use of the oven.
Odors and smoke are normal when the oven is used the first few
times, or when it is heavily soiled.
When the control is locked, only the CLOCK and TIMER pads will
function.
To Lock/Unlock Control: Before locking, make sure the oven and
Timer are off. Touch and hold START/ENTER for 5 seconds. A
single tone will sound, “LOC” and “LOCK’D” (on some models)
will appear on the display. “LOC” will also appear whenever any
command pad is pressed while the control is locked.
IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off. Exposure to the fumes may result in death to
certain birds. Always move birds to another closed and well
ventilated room.
Aluminum Foil
Repeat to unlock. “LOC” and “LOCK’D” (on some models) will
disappear from the display.
IMPORTANT: Do not line the oven bottom with any type of foil,
liners or cookware because permanent damage will occur to the
oven bottom finish.
Oven Temperature Control
I
Do not cover entire rack with foil because air must be able to
move freely for best cooking results.
IMPORTANT: Do not use a thermometer to measure oven
temperature because opening the oven door and element or
burner cycling may give incorrect readings.
I
To catch spills, place foil on rack below dish. Make sure foil is
at least 1 in. (2.5 cm) larger than the dish and that it is turned
up at the edges.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature
calibration can be adjusted.
Positioning Racks and Bakeware
A minus sign means the oven will be cooler by the displayed
amount. No sign means the oven will be warmer by the displayed
amount. Use the following chart as a guide.
IMPORTANT: Never place food or bakeware directly on the oven
door or bottom. Permanent damage will occur to the porcelain
finish.
ADJUSTMENT °F
COOKS FOOD
...a little more
...moderately more
...much more
RACKS
NOTES:
10°F
20°F
30°F
-10°F
-20°F
-30°F
I
I
I
Position racks before turning the oven on.
Do not move racks with bakeware on them.
Make sure racks are level.
To move a rack, pull it out to the stop position, raise the front
edge, then lift out. Use the following illustration and chart as a
guide.
...a little less
...moderately less
...much less
5
4
3
To Adjust Oven Temperature Calibration:
1. Press and hold BAKE for 5 seconds until the oven display
shows the current calibration, for example “00.”
2
1
2. Press the TEMP/TIME “up” or “down” arrow pad to increase
or to decrease the temperature in 10°F amounts. The
adjustment can be set between 30°F and -30°F.
3. Press START/ENTER.
FOOD
RACK POSITION
Frozen pies, large roasts, turkeys,
angel food cakes
1 or 2
Bundt cakes, most quick breads,
yeast breads, casseroles, meats
2
Cookies, biscuits, muffins, cakes,
nonfrozen pies
2 or 3
10
Download from Www.Somanuals.com. All Manuals Search And Download.
BAKEWARE
To cook food evenly, hot air must be able to circulate. Allow 2 in.
(5 cm) of space around bakeware and oven walls. Use the
following chart as a guide.
Meat Thermometer
On models without a temperature probe, always rely on a meat
thermometer to determine doneness of meat and poultry. The
internal temperature, not appearance, is what counts. A meat
thermometer is not supplied with this appliance.
NUMBER OF POSITION ON RACK
PAN(S)
I
I
I
Insert the thermometer into the center of the thickest portion
of the meat or inner thigh or breast of poultry. The tip of the
thermometer should not touch fat, bone or gristle.
1
Center of rack.
2
Side by side or slightly staggered.
After reading the thermometer once, push it into the meat
¹⁄₂ in. (1.25 cm) more and read again. If the temperature drops,
cook the meat or poultry longer.
3 or 4
Opposite corners on each rack. Make sure
that no bakeware piece is directly over
another.
Check all meat in 2 or 3 places.
Oven Vent
Bakeware
The bakeware material affects cooking results. Follow
manufacturer’s recommendations and use the bakeware size
recommended in the recipe. Use the following chart as a guide.
1
BAKEWARE/
RESULTS
RECOMMENDATIONS
Light colored
aluminum
I
Use temperature and time
recommended in recipe.
1. Oven vent
I
Light golden
crusts
The oven vent should not be blocked or covered since it allows
the release of hot air and moisture from the oven. Doing so will
cause poor air circulation, affecting cooking and cleaning results.
Never set plastics, paper or other items that could melt or burn
near the oven vent.
I
Even browning
Dark aluminum
and other
bakeware with
dark, dull and/or
nonstick finish
I
May need to reduce baking
temperatures 25°F (15°C).
I
I
Use suggested baking time.
For pies, breads and casseroles, use
temperature recommended in recipe.
I
Brown, crisp
crusts
I
Place rack in center of oven.
Insulated cookie
sheets or baking
pans
I
I
Place in the bottom third of oven.
May need to increase baking time.
I
Little or no
bottom
browning
Stainless steel
I
May need to increase baking time.
I
Light, golden
crusts
I
Uneven
browning
Stoneware
I
I
Follow manufacturer’s instructions.
I
Crisp crusts
Ovenproof
glassware,
ceramic glass or
ceramic
May need to reduce baking
temperatures 25°F (15°C).
I
Brown, crisp
crusts
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Baking and Roasting
Broiling and Custom Broiling
Before baking and roasting, position racks according to the
“Positioning Racks and Bakeware” section. When roasting, it is
not necessary to wait for the oven preheat conditioning time to
end before putting food in unless recommended in the recipe.
Broiling uses direct radiant heat to cook food. Changing the
temperature when Custom Broiling allows more precise control
when cooking. The lower the temperature, the slower the cooking.
Thicker cuts and unevenly shaped pieces of meat, fish and poultry
may cook better at lower broiling temperatures.
I
I
I
I
To Bake or Roast:
1. Press BAKE. The bake oven indicator light will light up.
2. Set the temperature (optional).
Use only the broiler pan and grid provided with the range. It is
designed to drain juices and help prevent spatter and smoke.
For proper draining, do not cover the grid with foil. The bottom
of the pan may be lined with aluminum foil for easier cleaning.
Press TEMP/TIME “up” or “down” arrow pad to set a
temperature other than 350°F (177ºC) in 5°F (3ºC) amounts.
The bake range can be set between 170°F (77ºC) and 500°F
(260ºC).
Trim excess fat to reduce spattering. Slit the remaining fat on
the edges to prevent curling.
When the oven temperature is greater than 170°F (77ºC), no
preheat conditioning time will be shown in the display.
Pull out oven rack to stop position before turning or removing
food. Use tongs to turn food to avoid the loss of juices. Very
thin cuts of fish, poultry or meat may not need to be turned.
The preheat conditioning time will not change if the
temperature is reset before the countdown time ends.
I
After broiling, remove the pan from the oven when removing
the food. Drippings will bake on the pan if left in the heated
oven, making cleaning more difficult.
If baking and roasting while the minute timer is counting
down, the set temperature can be seen for 5 seconds by
pressing BAKE.
Before broiling, position rack according to Broiling Chart. It is not
necessary to preheat the oven before putting food in unless
recommended in the recipe. Position food on grid in the broiler
pan, then place it in the center of the oven rack. Close the door to
the broil stop position to ensure proper broiling temperature.
3. Press START/ENTER.
The oven control automatically sets preheating times based
on the oven temperature selected.
The temperature can be changed after this step. START/
ENTER does not need to be pressed again.
After the oven is preheated and the countdown time is
finished, a 1-second tone will sound, the ON indicator light will
go off and the set temperature will appear on the display.
4. Press OFF/CANCEL when finished.
Preheating
After START/ENTER is pressed, the oven will enter a timed
preheat conditioning. “PrE” and the time countdown will appear
on the display. When the preheat conditioning time ends, a tone
will sound and the selected temperature will appear on the
display.
Preheat temperatures are affected by varying factors such as
room temperature and peak energy usage times. It is normal for
the temperature showing on the display and the actual oven
temperature to differ.
Waiting an additional 10 minutes after the preheat conditioning
time ends to put food in the oven is suggested when baking foods
with leavening ingredients, such as yeast, baking powder, baking
soda and eggs.
To Broil:
1. Press CUSTOM BROIL. The broil oven indicator light will light
up.
2. Press START/ENTER. The On and Heat oven indicator lights
will light up.
The temperature setting can be changed any time before or
after pressing START/ENTER. See “Custom Broiling” section.
If broiling while the time is counting down, the set broiling
temperature can be seen for 5 seconds by pressing CUSTOM
BROIL.
3. Press OFF/CANCEL when finished.
Custom Broiling
If foods are cooking too fast, press the TEMP/TIME “up” or
“down” arrow pad until 325°F (163°C) shows on the display.
1. Press CUSTOM BROIL to broil foods slower from the start of
cooking.
Press the TEMP/TIME “up” or “down” arrow pad to enter a
temperature between 300°F and 500°F (149°C and 260°C).
2. Press START/ENTER.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
BROILING CHART
For best results, place food 3 in. (7 cm) or more from the broil
element. Times are guidelines only and may need to be adjusted
for individual foods and tastes. Recommended rack positions are
numbered from the bottom (1) to the top (5). For diagram, see the
“Positioning Racks and Bakeware” section.
Convection Baking and Roasting
1
COOK TIME
RACK
POSITION
(in minutes)
FOOD
Side 1
Side 2
Steak
1 in. (2.5 cm) thick
medium rare
medium
4
4
4
14-15
15-16
18-19
7-8
8-9
well done
9-10
2
3
Ground meat patties*
³ꢀ₄ in. (2 cm) thick
well done
1. Broil element
2. Convection fan
3. Bake element
4
4
13-14
20-22
7-8
Pork chops
1 in. (2.5 cm) thick
10-11
During convection baking or roasting, the bake and broil elements
cycle on and off in intervals to maintain the oven temperature,
while the fan constantly circulates the hot air.
If the oven door is opened during convection baking or roasting,
the fan will turn off immediately. The fan will come back on once
the door is closed.
Ham slice, precooked
¹ꢀ₂ in. (1.25 cm) thick
4
4
8-10
5-7
4-5
3-4
Frankfurters
I
For optimal cooking results, do not use aluminum foil.
Lamb chops
I
Reduce recipe temperature 25°F. The cook time may need to
be reduced also. See the cookbook supplied with this oven for
more information.
1 in. (2.5 cm) thick
4
14-17
8-9
Chicken
bone-in pieces
boneless breasts
3
4
17-20
11-16
17-20
11-16
To Convection Bake or Roast:
Before convection baking or roasting, position the racks
according to the “Positioning Racks and Bakeware” section.
When using two racks, place them on rack positions 2 and 4.
When roasting with convection, use the roasting rack on top of
the broiler pan and grid. It is not necessary to wait for the oven to
preheat before putting food in, unless recommended in the recipe.
Fish
Fillets ¹ꢀ₄- ¹ꢀ₂ in.
(.6-1.25 cm) thick
Steaks ³ꢀ₄- 1 in.
(2-2.5 cm) thick
4
4
8-10
4-5
8-9
16-18
*Place up to 9 patties, equally spaced, on broiler grid.
Convection Cooking
(on some models)
In a convection oven, the fan-circulated hot air continually
distributes heat more evenly than the natural movement of air in a
standard thermal oven. This movement of hot air maintains a
consistent temperature throughout the oven, cooking foods more
evenly, crisping surfaces while sealing in moisture and yielding
crustier breads.
Most foods can be cooked by lowering cooking temperatures
25°F to 50°F (14°C to 28°C) and cooking time can be shortened
by as much as 30 percent, especially for large turkeys and roasts.
1. Roasting rack
2. Broiler grid
3. Broiler pan
I
I
I
I
It is important not to cover foods so that surface areas remain
exposed to the circulating air, allowing browning and crisping.
1. Press BAKE. The bake oven indicator light will light up.
2. Set the temperature (optional).
Keep heat loss to a minimum by only opening the oven door
when necessary.
Press TEMP/TIME “up” or “down” arrow pad to set a
temperature other than 350°F in 5° amounts. The bake range
can be set between 170°F and 500°F.
Choose cookie sheets without sides and roasting pans with
lower sides to allow air to move freely around the food.
3. Press START/ENTER.
The temperature can be changed after this step. START/
ENTER does not need to be pressed again.
Test baked goods for doneness a few minutes before the
minimum cooking time with an alternative method such as a
toothpick.
4. Press the CONVECTION FAN switch to the ON position.
I
Use a meat thermometer or the temperature probe to
determine the doneness of meats and poultry. Check the
temperature of pork and poultry in two or three places.
The switch light will glow while the convection fan is on.
5. Press OFF/CANCEL and press the CONVECTION FAN switch
to the OFF position when finished cooking.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CONVECTION ROASTING CHART
Food/Rack
Position
Cook Time
(min. per
Oven Temp.
Internal
Food Temp.
Food/Rack
Position
Cook Time
(min. per
1 lb [454 g])
Oven Temp.
Internal
Food Temp.
1 lb [454 g])
Turkey*, Rack Positions 1 or 2
Beef, Rack Position 2
Rib Roast
13 lbs.
10-15
10-12
300°F (149°C) 180°F (82°C)
300°F (149°C) 180°F (82°C)
(5.85kg) and
under
rare
20-25
25-30
30-35
140°F (60°C)
300°F (149°C) 160°F (71°C)
170°F (77°C)
medium
well done
Over 13 lbs.
(5.85 kg)
Rib Roast
(boneless)
rare
medium
well done
Cornish Game Hens*, Rack Position 2 or 3
22-25
27-30
32-35
140°F (60°C)
300°F (149°C) 160°F (71°C)
170°F (77°C)
1-1.5 lbs.
50-60
325°F (163°C) 180°F (82°C)
(0.5-0.7 kg)
Rump,
Sirloin Tip
Roast
*Do not stuff poultry when convection roasting.
rare
20-25
25-30
30-35
140°F (60°C)
300°F (149°C) 160°F (71°C)
170°F (77°C)
medium
well done
Meat Loaf
Convection Broiling
20-25
325°F (163°C) 165°F (74°C)
1
Veal, Rack Position 2
Loin, Rib,
Rump
Roast
medium
well done
25-35
30-40
325°F (163°C) 160°F (71°C)
170°F (77°C)
Pork, Rack Position 2
Loin Roast
30-40
35-40
325°F (163°C) 160°F-170°F
(71°C-77°C)
325°F (163°C) 160°F-170°F
(71°C-77°C)
(boneless)
2
Shoulder
Roast
1. Broil element
2. Convection fan
Ham, Rack Position 2
During convection broiling, the broil element cycles on and off in
intervals to maintain the oven temperature, while the fan
constantly circulates the hot air.
Fresh
25-35
15-20
300°F (149°C) 160°F (71°C)
300°F (149°C) 160°F (71°C)
(uncooked)
Fully
Cooked
To Convection Broil:
Before convection broiling, see the “Broiling” section for general
broiling guidelines and rack positioning.
Allow the oven to preheat for 5 minutes. Position food on the grid
in the broiler pan, then place it in the center of the oven rack with
the longest side parallel to the door.
Close the door.
1. Press CUSTOM BROIL.
The broil oven indicator light will light up.
Lamb, Rack Position 2
Leg,
Shoulder
Roast
medium
25-30
30-35
300°F (149°C)
160°F (71°C)
170°F (77°C)
well done
2. Press START/ENTER.
Chicken*, Rack Position 2
Whole
The on and heat oven indicator lights will light up.
The temperature can be changed any time before or after
pressing START/ENTER. To change, see the “Broiling”
section.
3-5 lbs.
20-25
325°F (163°C) 180°F (82°C)
325°F (163°C) 180°F (82°C)
(1.5-2.2 kg)
5-7 lbs.
(2.2-3.1 kg)
15-20
3. Press the CONVECTION FAN switch to the ON position.
The switch light will glow while the convection fan is on.
4. Press OFF/CANCEL and press the CONVECTION FAN switch
to the OFF position when finished.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Timed Cooking
RANGE CARE
WARNING
Self-Cleaning Cycle
Food Poisoning Hazard
(on some models)
Do not let food sit in oven more than one hour
before or after cooking.
WARNING
Doing so can result in food poisoning or
sickness.
Timed Cooking allows the oven to be set to turn on at a certain
time of day, cook for a set length of time, and/or shut off
automatically. Delay start should not be used for food such as
breads and cakes because they may not bake properly.
To Set a Cook Time:
Burn Hazard
1. Press BAKE. The bake oven indicator light will light up.
Do not touch the oven during the
Self-Cleaning cycle.
2. Set the temperature (optional).
Press the TEMP/TIME “up” or “down” arrow pad to enter a
temperature other than the one displayed.
Keep children away from oven during
Self-Cleaning cycle.
3. Press COOK TIME. The cook time oven indicator light will light
up.
Failure to follow these instructions can result
in burns.
4. Press TEMP/TIME “up” or “down” arrow pad to enter the
length of time to cook.
5. Press START/ENTER.
The display will count down the time.
IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off during the Self-Cleaning cycle. Exposure to
the fumes may result in death to certain birds. Always move birds
to another closed and well ventilated room.
Self-clean the oven before it becomes heavily soiled. Heavy soil
results in longer cleaning and more smoke.
Keep the kitchen well-ventilated during the Self-Cleaning cycle to
help get rid of heat, odors, and smoke.
Do not block the oven vent(s) during the Self-Cleaning cycle. Air
must be able to move freely. Depending on your model, see “Oven
Vent” or “Oven Vents” section.
When the time ends, the oven will shut off automatically and
“End” will appear on the display.
6. Press OFF or open the oven door to clear the display.
To Set a Cook Time Using Convection (on some models):
Repeat above steps 1-5. Press the CONVECTION FAN switch to
the ON position. The switch light will glow while the convection
fan is on.
When finished, the oven will turn off automatically.
Do not clean, rub, damage or move the oven door gasket. The
door gasket is essential for a good seal.
To Set a Delayed Cook Time:
Before setting, make sure the clock is set to the correct time of
day. See “Clock” section.
1. Press BAKE.
2. Set the temperature (optional).
Prepare Oven:
I
I
I
I
Remove the broiler pan, grid, cookware and bakeware and, on
some models, the temperature probe from the oven.
Press the TEMP “up” or “down” arrow pads to enter a
temperature other than the one displayed.
Remove any foil from the oven because it may burn or melt,
damaging the oven.
3. Press COOK TIME.
Remove oven racks to keep them shiny and easy to slide. See
“General Cleaning” section for more information.
The cook time oven indicator light will light up.
4. Press the TEMP/TIME “up” or “down” arrow pad to enter the
Hand clean inside door edge and the 1½ in. (3.8 cm) area
around the inside oven cavity frame, being careful not to move
or bend the gasket. This area does not get hot enough during
self-cleaning to remove soil. Do not let water, cleaner, etc.
enter slots on door frame. Use a damp cloth to clean this area.
length of time to cook.
5. Press START TIME.
The start time/delay oven indicator light will light up.
6. Press the TEMP/TIME “up” or “down” arrow pad to enter the
I
Wipe out any loose soil to reduce smoke and avoid damage.
At high temperatures, foods react with porcelain. Staining,
etching, pitting or faint white spots can result. This will not
affect cooking performance.
time of day to start.
7. Press START/ENTER.
When the start time is reached, the oven will automatically
turn on.
Prepare Cooktop and Storage Drawer:
The temperature and/or time settings can be changed any
time after pressing START/ENTER by repeating steps 1-6.
I
Remove plastic items from the cooktop because they may
melt.
When the set cook time ends, the oven will shut off
automatically and “End” will appear on the display.
I
Remove all items from the storage drawer.
8. Press OFF/CANCEL or open the oven door to clear the
display.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
How the Cycle Works
IMPORTANT: The heating and cooling of porcelain on steel in the
oven may result in discoloring, loss of gloss, hairline cracks and
popping sounds.
The Self-Cleaning cycle uses very high temperatures, burning soil
to a powdery ash.
The oven is preset for a 3 hour 30 minute clean cycle, but the time
can be changed. Suggested clean times are 2 hours 30 minutes
for light soil and between 3 hours 30 minutes to 4 hours 30
minutes for average to heavy soil.
Once the oven has completely cooled, remove ash with a damp
cloth. Do not wipe down any of the inside surfaces until the oven
has completely cooled down. Applying a cool, damp cloth to the
inner door glass before it has cooled completely could result in
the glass breaking.
CERAMIC GLASS (on some models)
Do not use steel wool, abrasive powder cleansers, chlorine
bleach, rust remover or ammonia because damage may occur.
Always wipe with a clean, wet cloth or sponge and dry thoroughly
to prevent streaking and staining.
Cooktop Polishing Creme is recommended for regular use to help
prevent scratches, pitting and abrasions, and to condition the
cooktop. It may be ordered as an accessory. See “Assistance or
Service” to order.
A Cooktop Scraper is also recommended for stubborn soils, and
can be ordered as an accessory. See “Assistance or Service” to
order. The Cooktop Scraper uses razor blades. Store razor
blades out of the reach of children.
Light to moderate soil
The oven light will not work during the Self-Cleaning cycle.
I
Paper towels or clean damp sponge:
To Self-Clean:
Clean while the cooktop is still warm. You may want to wear
oven mitts while doing so.
Before self-cleaning, make sure the door is closed completely or it
will not lock and the cycle will not begin.
1. Press AUTO CLEAN.
2. Press the TEMP/TIME “up” or “down” arrow pad to set a
clean time other than 3 hours 30 minutes. The clean time can
be set between 2 hours 30 minutes and 4 hours 30 minutes.
Sugary spills (jellies, candy, syrup)
I
Cooktop Scraper:
Clean while the cooktop is still warm. You may want to wear
oven mitts while doing so.
3. Press START/ENTER.
I
Cooktop Polishing Creme and clean damp paper towel:
The oven door will automatically lock. The ON, HEAT and
DOOR LOCKED oven indicator lights will light up. The door
will not unlock until the oven cools.
Clean as soon as cooktop has cooled down. Rub creme into
surface with a damp paper towel or soft cloth. Continue
rubbing until white film disappears.
When the cycle is complete and the oven cools, “End” will
appear on the oven display and the oven indicator lights will
go off.
Heavy soil, dark streaks, specks and discoloration
I
Cooktop Polishing Creme or nonabrasive cleanser:
Rub product into soil with a damp paper towel or soft cloth.
Continue rubbing until white film disappears.
4. Press OFF/CANCEL to clear the oven display.
To Stop Self-Clean any time:
Burned-on soil
Press OFF. If the oven temperature is too high, the door will
remain locked. It will not unlock until the oven cools.
I
Cooktop Polishing Creme and Cooktop Scraper:
Rub creme into soil with damp paper towel. Hold scraper as
flat as possible on surface and scrape. Repeat for stubborn
spots. Polish entire cooktop with creme and paper towel.
General Cleaning
Metal marks from aluminum and copper
I
IMPORTANT: Before cleaning, make sure all controls are off and
the oven and cooktop are cool. Always follow label instructions on
cleaning products.
Cooktop Polishing Creme:
Clean as soon as cooktop has cooled down. Rub creme into
surface with a damp paper towel or soft cloth. Continue
rubbing until white film disappears. The marks will not totally
disappear but after many cleanings become less noticeable.
Soap, water and a soft cloth or sponge are suggested first unless
otherwise noted.
EXTERIOR PORCELAIN ENAMEL SURFACES
(on some models)
Tiny scratches and abrasions
I
Cooktop Polishing Creme:
Food spills containing acids, such as vinegar and tomato, should
be cleaned as soon as the entire appliance is cool. These spills
may affect the finish.
Rub creme into surface with a damp paper towel or soft cloth.
Continue rubbing until white film disappears. Scratches and
abrasions do not affect cooking performance and after many
cleanings become less noticeable.
I
Glass cleaner, mild liquid cleaner or nonabrasive scrubbing
pad:
Gently clean around the model and serial number plate
because scrubbing may remove numbers.
COOKTOP CONTROLS
Do not use steel wool, abrasive cleansers or oven cleaner.
Do not soak knobs.
When replacing knobs, make sure knobs are in the OFF position.
On some models, do not remove seals under knobs.
I
Soap and water or dishwasher:
Pull knobs straight away from control panel to remove.
OVEN DOOR EXTERIOR
I
Glass cleaner and paper towels or nonabrasive plastic
scrubbing pad:
Apply glass cleaner to soft cloth or sponge, not directly on
panel.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL PANEL
Oven Door
Do not use abrasive cleaners, steel-wool pads, gritty washcloths
or some paper towels. Damage may occur.
For normal range use, it is not suggested to remove the oven
door. However, if removal is necessary, make sure the oven is off
and cool. Then, follow these instructions. The oven door is heavy.
I
Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on
panel.
To Remove:
1. Fully open the oven door.
2. Tighten clips with a #2 square or Phillips screwdriver.
OVEN CAVITY
Do not use oven cleaners.
Food spills should be cleaned when oven cools. At high
temperatures, foods react with porcelain and staining, etching,
pitting or faint white spots can result.
I
I
I
Self-Cleaning cycle:
See “Self-Cleaning Cycle” first.
OVEN RACKS AND ROASTING RACKS
Self-Cleaning cycle:
See “Self-Cleaning Cycle” first. Remove racks or they will
discolor and become harder to slide. If this happens, a light
coating of vegetable oil applied to the rack guides will help
them slide.
3. Close oven door to the stop position (open about 4 in.
[10 cm]).
4. Lift door slightly and pull out and back until hinges come out
Steel-wool pad
to the catch position.
5. Push door down and pull straight out to remove door
completely.
BROILER PAN AND GRID
Do not clean in the Self-Cleaning cycle (on some models).
4" (10 cm)
I
Mildly abrasive cleanser:
Scrub with wet scouring pad.
I
Solution of ¹ꢀ₂ cup (125 mL) ammonia to 1 gal. (3.75 L) water:
Soak for 20 minutes, then scrub with scouring or steel-wool
pad.
To Replace:
I
Oven cleaner:
1. Hold oven door by the handle and place the top of the door
under the cooktop overhang.
Follow product label instructions.
2. Use front of leg to apply pressure to slide hinges into the slots
Porcelain enamel only, not chrome
Dishwasher
as far as possible.
I
3. Use side of leg to apply pressure to the bottom of the door
front.
4. Lift door slightly. Apply pressure and push until the hinges
Oven Light
have gone in fully.
The oven light is a standard 40-watt appliance bulb. It will come
on when the oven door is open. It will not work during the Self-
Cleaning cycle. On some models, when the oven door is closed,
press OVEN LIGHT to turn it on or off.
5. Fully open the door.
6. Tighten clips with a #2 square or Phillips screwdriver.
Before replacing, make sure the oven and cooktop are cool and
the control knobs are in the off position.
To replace:
1. Unplug range or disconnect power.
2. Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
Storage Drawer
The storage drawer can be removed. Before removing, make sure
drawer is cool and empty.
To Remove:
1. Pull drawer straight out to the first stop.
2. Lift up the back of the drawer and pull out.
3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb and bulb cover by turning clockwise.
5. Plug in range or reconnect power.
To Replace:
1. Fit the ends of the drawer rails into the guides in the cavity.
2. Slide the drawer closed.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Try the solutions suggested here first in order to avoid the cost of
Oven indicator lights flash
an unnecessary service call.
I
Do the oven indicator lights flash?
Nothing will operate
See the “Oven Indicator Lights” section. If the indicator light(s)
keeps flashing, call for service. See “Assistance or Service”
section.
I
I
Is the power supply cord unplugged?
Plug into a grounded 3-prong outlet.
Has a household fuse been blown or has the circuit
breaker been tripped?
Display shows messages
Replace the fuse or reset the circuit.
I
I
Is the display showing “PF”?
There has been a power failure. Clear the display. See
“Display(s)” section. On some models, reset the clock, if
needed. See “Clock” section.
Cooktop will not operate
I
I
Is the control knob set correctly?
Push in knob before turning to a setting.
Is the display showing a letter followed by a number?
Depending on your model, press OFF/CANCEL, OFF or
CANCEL/OFF to clear the display. See “Display(s)” section. If
it reappears, call for service. See “Assistance or Service”
section.
Excessive heat around cookware on cooktop
Is the cookware the proper size?
Use cookware about the same size as the surface cooking
area, element or surface burner. Cookware should not extend
more than 1 in. (2.5 cm) outside the cooking area.
Self-Cleaning cycle will not operate
I
I
I
Is the oven door open?
Close the oven door all the way.
Hot Surface indicator light stays on
Has the function been entered?
See “Self-Cleaning Cycle” section.
I
Does the Hot Surface indicator light stay on after control
knob(s) have been turned off?
See “Cooktop Controls” section.
On some models, has a delay start Self-Clean cycle been
set?
See “Self-Cleaning Cycle” section.
Cooktop cooking results not what expected
I
Has a delay start been set?
See “Timed Cooking” section.
I
I
I
Is the proper cookware being used?
See “Cookware” section.
Oven cooking results not what expected
Is the control knob set to the proper heat level?
See “Cooktop Controls” section.
I
I
I
I
I
I
I
I
I
I
Is the appliance level?
Level the appliance. See the Installation Instructions.
Is the appliance level?
Level the appliance. See the Installation Instructions.
Is the proper temperature set?
Double-check the recipe in a reliable cookbook.
Oven will not operate
Is the proper oven temperature calibration set?
See “Oven Temperature Control” section.
I
I
I
Is the electronic oven control set correctly?
See “Electronic Oven Control” section.
Was the oven preheated?
See “Baking and Roasting” section.
Has a delay start been set?
See “Timed Cooking” section.
Is the proper bakeware being used?
See “Bakeware” section.
On some models, is the Control Lock set?
See “Control Lock” section.
Are the racks positioned properly?
See “Positioning Racks and Bakeware” section.
Is there proper air circulation around bakeware?
See “Positioning Racks and Bakeware” section.
Oven temperature too high or too low
I
I
Does the oven temperature calibration need adjustment?
See “Oven Temperature Control” section.
Is the batter evenly distributed in the pan?
Check to make sure batter is level in the pan.
On some models, does the cooling fan run during BAKE,
BROIL or CLEAN?
It is normal for the fan to automatically run when the oven is in
use. These helps cool the electronic control.
Is the proper length of time being used?
Adjust cooking time.
Has the oven door been opened while cooking?
Oven peeking releases oven heat and can result in longer
cooking times.
I
I
Are baked items too brown on the bottom?
Move rack to higher position in the oven.
Are pie crust edges browning early?
Use aluminum foil to cover the edge of the crust and/or
reduce baking temperature.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSISTANCE OR SERVICE
Before calling for assistance or service, please check
For further assistance
“Troubleshooting.” It may save you the cost of a service call. If you
If you need further assistance, you can write to Whirlpool
still need help, follow the instructions below.
Corporation with any questions or concerns at:
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
Estate Brand Home Appliances
Customer Interaction Center
553 Benson Road
Benton Harbor, MI 49022-2692
If you need replacement parts
Please include a daytime phone number in your correspondence.
If you need to order replacement parts, we recommend that you
only use FSP® replacement parts. FSP® replacement parts will fit
right and work right because they are made with the same
precision used to build every new ESTATE® appliance.
Accessories U.S.A.
To order accessories, call the Whirlpool Customer Interaction
Center toll free at 1-800-442-9991 and follow the menu prompts.
Accessories Online.”
To locate FSP® replacement parts in your area, call our Customer
Interaction Center telephone number or your nearest designated
ESTATE® service center.
Canning Unit Kit
(coil element models)
Order Part #242905
In the U.S.A.
Call the Whirlpool Customer Interaction Center
toll free: 1-800-253-1301.
Our consultants provide assistance with:
Dehydration Kit
(includes 3 racks and an oven door stop)
Order Part #4395974A96
I
I
I
I
I
Features and specifications on our full line of appliances.
Installation information.
Cooktop Polishing Creme
(ceramic glass models)
Order Part #4392916
Use and maintenance procedures.
Accessory and repair parts sales.
Specialized customer assistance (Spanish speaking, hearing
impaired, limited vision, etc.).
Cooktop Scraper
(ceramic glass models)
Order Part #3183488
I
Referrals to local dealers, repair parts distributors, and service
companies. Whirlpool designated service technicians are
trained to fulfill the product warranty and provide after-
warranty service, anywhere in the United States.
Stainless Steel Cleaner & Polish
(stainless steel models)
Order Part #4396095
To locate the Whirlpool designated service company in your
area, you can also look in your telephone directory Yellow
Pages.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
®
ESTATE RANGE WARRANTY
FULL ONE-YEAR WARRANTY
For one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or
furnished with the product, Whirlpool Corporation will pay for FSP® replacement parts and repair labor costs to correct defects in
materials or workmanship. Service must be provided by a Whirlpool Corporation designated service company.
SECOND THROUGH FIFTH YEAR LIMITED WARRANTY ON CERAMIC GLASS RANGES AND CERAMIC GLASS COOKTOPS
On ceramic glass ranges and ceramic glass cooktops, in the second through fifth years from the date of purchase, when this appliance
is operated and maintained according to instructions attached to or furnished with the product, Whirlpool Corporation will pay for FSP®
replacement parts for the CLEANTOP® ceramic glass cooktop.
Whirlpool Corporation warrants that the ceramic glass cooktop will not discolor, the cooktop pattern will not wear off, the rubber seal
between the ceramic glass cooktop and porcelain edge will not crack, the ceramic glass cooktop will not crack due to thermal shock
and the surface unit elements will not burn out. Service must be provided by a Whirlpool designated service company.
Whirlpool Corporation will not pay for:
1. Service calls to correct the installation of your appliance, to instruct you how to use your appliance, to replace house fuses or
correct house wiring, or to replace owner-accessible light bulbs.
2. Repairs when your appliance is used in other than normal, single-family household use.
3. Pickup and delivery. Your appliance is designed to be repaired in the home.
4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, improper installation, acts of God or use of products not
approved by Whirlpool Corporation.
5. Repairs to CLEANTOP®
ceramic glass cooktop if it has not been cared for as recommended in the Use and Care Guide.
6. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.
7. Replacement parts or repair labor costs for units operated outside the United States.
8. Any labor costs during the limited warranty period.
WHIRLPOOL CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion or limitation may not
apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.
Outside the 50 United States, this warranty does not apply. Contact your authorized Whirlpool dealer to determine if another
warranty applies.
If you need service, first see the “Troubleshooting” section of this book. After checking “Troubleshooting,” additional help can be found
by checking the “Assistance or Service” section or by calling the Whirlpool Customer Interaction Center, 1-800-253-1301 (toll-free),
from anywhere in the U.S.A.
5/00
Keep this book and your sales slip together for future
reference. You must provide proof of purchase or installation
date for in-warranty service.
Dealer name____________________________________________________
Address________________________________________________________
Phone number__________________________________________________
Model number __________________________________________________
Serial number __________________________________________________
Purchase date __________________________________________________
Write down the following information about your appliance to
better help you obtain assistance or service if you ever need it.
You will need to know your complete model number and serial
number. You can find this information on the model and serial
number label/plate, located on your appliance as shown in the
“Parts and Features” section.
9782188A
© 2003 Whirlpool Corporation.
8/03
Printed in U.S.A.
All rights reserved.
® Registered Trademark/TM Trademark of Whirlpool, U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
|