TABLE OF CONTENTS
FLOW CHART...........................................................................................1
CONTROLS & FUNCTIONS.......................................................................2
REAR CONTROLS.........................................................................................4
DMX-512 ADDRESSING..............................................................................4
PROGRAMMING SCENES........................................................................8
PROGRAMMING SCENES REVIEW:.......................................................9
SCENE COPY:.......................................................................................10
SCENE EDITING:...................................................................................10
DELETE SCENE :.................................................................................10
RESET ALL SCENES:............................................................................10
COPY BANK OF SCENES:.................................................................11
DELETE BANK OF SCENES:................................................................11
PROGRAMMING CHASES.....................................................................12
EDITING CHASES....................................................................................12
INSERT A STEP:....................................................................................12
DELETE A STEP:....................................................................................13
DELETE A COMPLETE CHASE:...........................................................13
DELETE ALL CHASES:..........................................................................13
PLAYBACK SCENES & CHASES...............................................................14
MANUAL RUN SCENES:....................................................................14
MANUAL RUN CHASES:....................................................................14
AUTO RUN SCENES:..........................................................................14
AUTO RUN CHASES:.........................................................................15
MUSIC RUN SCENES:........................................................................15
MUSIC RUN CHASES:..........................................................................15
USER INSTRUCTIONS
MIDI OPERATION.......................................................................................16
TROUBLE SHOOTING.................................................................................18
CABLE TERMINATION................................................................................18
MIDI
DMX-512
CAPABLE
©Elation Professional®
DIP SWITCH DMX ADDRESS CHARTS........................................................20
Specifications are subject to change without notice!
4295 Charter Street
Los Angeles Ca. 90058
rev. 4/04
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS & FUNCTIONS
REAR CONTROLS
16. MIDI IN- Receives MIDI data.
17. DMX POLARITY SELECT- Changes the polarity setting of the DMX
1. SCANNER BUTTONS - Used to Select any or all of 12 fixtures This
is what selects which DMX channels go to
the fixtures.
output.
18. DMX OUT- Used to send DMX signal to fixtures or Packs.
19. DC INPUT- Accepts a DC 9~12V, 300 mA minimum, power
supply.
Scanner 1 controls Channel 1 to 16
Scanner 2 controls Channel 17 to 32
See addressing of fixtures on page 7 for more information
2. SCENE BUTTONS - Used to store Scenes in program mode or
playback your scenes in playback mode
3. LCD DISPLAY - Displays values and settings depending on the
chosen function.
16
17
18
19
4. BANK BUTTONS ( OR )- Selects which Bank you want to use.
(there are 30 selectable banks total.)
5. CHASE - Used to select chases (1-6).
6. PROGRAM - Used to activate program mode Display blinks when
activated.
7. MIDI / REC - Used to control MIDI operation or to Record each
step for Scene and Chases.
DMX POLARITY
SELECT
MIDI IN
DMX OUT
DC INPUT
+
-
1:GND
1:GND
2:DATA -
3:DATA +
2:DATA +
3:DATA -
+9V-+12V 300mA Min.
8. AUTO/DEL- Select AUTO speed in chase mode or Deletes
Scenes and or chases .
9. MUSIC / BANK COPY- Used to trigger sound activation in Chase
mode or to copy a bank of scenes from one to
another in Program Mode
10. BLACKOUT - Disables or enables all channel outputs
11. TAP SYNC / DISPLAY - In Auto Chase mode used to change
rate of chase also to change LCD Display in
Manual Chase.
12. FADE TIME SLIDER - Used to adjust the FADE TIME. Fade Time is
the amount of time it takes the DMX Operator
DMX512 ADDRESSING
WHEN ADDRESSING YOUR FIXTURES FOLLOW THE STARTING
ADDRESS IN THIS BOOK NOT THE ADDRESSING FOUND IN YOUR
FIXTURE MANUAL
DMX 512 is a type of protocol that sends out up to 512 multiplex
channels at once down a common cable. Each channels has a value
from 0 to 255. You set the address for each receiver(fixture) by using
Dip switches or some type of digital readout
to completely change from one scene to another.
For example; if the fade time slider is set to 0 (zero) a scene change will
be instant. If the slider is set to ‘30s’ it will take the DMX Operator 30 sec-
onds to complete the change from one scene to the next.
13. SPEED SLIDER - Used to adjust the rate of chase speed in Auto
Mode.
Each Dip switch has an ADDRESS based on binary code.
Dip switch
Value
#1 #2 #3 #4 #5 #6 #7 #8 #9
2 4 8 16 32 64 128 256
1
YOU SELECT THE ADDRESS WANTED BY ADDING THE TOTAL OF
DIP SWITCHES ON.
14. PAGE SELECT - Used to select faders between PAGE A (1-8) and
PAGE B (9-16) of each Scanner Button
Dip switch #10 is not used with DMX but normally to select some
Function ie: Master / Slave, Sound Activation or to receive DMX
Control.
15. FADERS (1-8) - Used to adjust the intensity from 0% to 100% or DMX
output level from 0 to 255 of each channel
Elation Professional® - DMX OPERATOR User Manual page 3
Elation Professional® - DMX OPERATOR User Manual page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Some units start receiving one more than the ADDRESS selected.
Example: Elation Patend Light, Elation Professional Mighty Scan
Most fixtures start receiving on the address selected
EXAMPLE:
Setting ADDRESS at 0 unit starts at CHANNEL 1 all Dip switches OFF
EXAMPLE:
Setting ADDRESS for
17
Setting ADDRESS for
49
Setting ADDRESS at 1 unit starts at CHANNEL 1
Dip switch # 1 on
Setting ADDRESS for
17 unit starts at
CHANNEL 17
Setting ADDRESS for
49 unit starts at
CHANNEL 49
Dip switch
# 5 = 16
= 16
Dip switch # 5 = 16
6 = 32
= 48
unit starts at 49
Dip switch
“
# 1 =
# 5 = +16
= 17
1
Dip switch # 1 =
1
unit starts at 17
“
“
5 = 16
6 =
=
32
49
DIP SWITCH DMX ADDRESS DIP SWITCH DMX ADDRESS
32 128
2
8
2
8
32 128
ON
ON
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
1
4
16 64 256
1
4
16 64 256
DIP SWITCH DMX ADDRESSDIP SWITCH DMX ADDRESS
32 128 32 128
2
8
2
8
Dip switch total = 16
unit starts at
Dip switch total = 48
unit starts at
ON
ON
CHANNEL 17
CHANNEL 49
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
1
4
16 64 256
1
4
16 64 256
Dip switch total = 17
unit starts at
Dip switch total = 49
unit starts at
CHANNEL 17
CHANNEL 49
Elation Professional® - DMX OPERATOR User Manual page 5
Elation Professional® - DMX OPERATOR User Manual page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
While DMX 512 is the standard used to control lighting, at this time,
there are some differences you should know about. One is pin con-
figuration. The DATA + And DATA- are reversed. This can be corrected
by using the reversal switch on the DMX Operator. If you have some
fixtures from each polarity use adapter Z-DMXADAPT between the fix-
tures.
PROGRAMMING SCENES
1. PRESS AND HOLD PROGRAM BUTTON (FIG. 6) for three (3) seconds
to activate program mode. The LCD DISPLAY (FIG.3) will indicate
your in program mode by displaying a continuous fast blinking
light next to ‘PROG.
2. Select a fixture to program, by pressing any or all SCANNER BUTTONS
1 TO 12 (FIG2).
TYPE 1
TYPE 2
3. Adjust the faders to the desired settings of the fixture or fixtures your
programming (i.e. Color, Gobo, Pan, Tilt, Speed, etc.), by adjusting
the fader values. Use the PAGE A B BUTTON if your Fixture has more
than eight channels. When selecting from Page A to B you have to
move Sliders to activate channels
XLR MALE SOCKET
XLR MALE SOCKET
Data+ 2
Data - 2
3 Data -
3 Data +
1 Ground
1 Ground
DATA IN
DATA IN
4. Once you’ve reached your desired setting and or position for the
Fixture, you can press the SCANNER BUTTON you were adjusting this
stops adjustment of that Fixture(s). You then press another SCANNER
BUTTON to select another Fixture to adjust.You can adjust more than
one fixture at a time by selecting more than one Scanner Button at
a time
Addressing Fixtures
In order to have individual control of each fixture with
the DMX operator Fixture addresses should be addressed
as follows.
5. Repeat steps 2 and 3 until all the lights are where you want.
Scanner Button # 1 starts at 1
Scanner Button # 2 starts at 17
Scanner Button # 3 starts at 33
6. When entire scene is set to your liking, press and release the
MIDI / REC BUTTON (FIG 7.) .
8. Then press a SCENE BUTTON 1-8 (FIG 2) to store this scene. ALL LEDS
BLINK 3 TIMES The LCD will display the bank and scene where your
scene was stored.
Scanner Button # 4 starts at 49
Scanner Button # 5 starts at 65
Scanner Button # 6 starts at 81
9. Repeat steps 2-8 to record your first 8 scenes.
Scanner Button # 7 starts at 97
Scanner Button # 8 starts at 113
Scanner Button # 9 starts at 129
Scanner Button # 10 starts at 145
You can copy the settings from one scanner button to another in case you
want to add more lights to your show. just press and hold the scanner button
you want to copy then press the Scanner button you want to copy to
Scanner Button # 11 starts at 161
Scanner Button # 12 starts at 177
If you are not sure how to set the starting address of your
Fixture refer to Chart on pages 20 & 21 of manual.
10. Now use the UP and DOWN BANK BUTTONS (FIG.4). to record more
banks of scenes. There are 30 banks you can store up to 8 scenes
per a bank for a total of 240 scenes.
11. To exit programming mode press and hold the PROGRAM BUTTON
(FIG.6) for 3 seconds.
When you exit programming Blackout LED is on press BLACKOUT BUTTON
to de-activate blackout.
Elation Professional® - DMX OPERATOR User Manual page 7
Elation Professional® - DMX OPERATOR User Manual page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Scenes continued
PROGRAMMING SCENES REVIEW
SCENE COPY:
To review this is how you would create a simple 4 step box pattern
This function allows you to copy the settings of one scene to another.
1. Press the PROGRAM BUTTON (FIG. 6) for three (3) seconds to
activate program mode. The LCD DISPLAY (FIG.3) will indicate
program mode by displaying a continuous fast blinking dot next
to ‘PROG.’
1. Press and hold PROGRAM BUTTON (FIG. 6) for three (3) seconds
2. Select a fixture(s) to program using the SCANNER BUTTONS 1 TO 12
NOTE: WHEN YOU ARE BEGINNING IT MAY BE EASIER TO USE FOUR
CUPS OR OTHER OBJECTS PLACED ON THE FLOOR AS A GUIDE.
3. Adjust the faders to the desired Color, Gobo, then using the Pan, Tilt,
adjust the mirrors to go to the bottom corner of the dance floor.
4. Press and release the MIDI / REC BUTTON (FIG 7.).
5. Then press SCENE BUTTON 1ALL LEDS BLINK 3 TIMES
6. Adjust the Pan faders to adjust the mirrors to go across to the other
bottom corner of the dance floor.
2. Use the UP and DOWN BANK BUTTONS (FIG.4) to locate the bank
that contains the scene you wish to copy.
3. Press the SCENE BUTTON (FIG.5), that contains the scene you want to
copy.
4. Use the UP and DOWN BANK BUTTONS (FIG.4) to select the bank you
want to copy the scene to.
7. Press and release the MIDI / REC BUTTON (FIG 7.).
8. Then press SCENE BUTTON 2 ALL LEDS BLINK 3 TIMES
9. Adjust the tilt fader to adjust the mirrors to go up to the top corner
of the dance floor.
10. Press and release the MIDI / REC BUTTON (FIG 7.).
11. Now press SCENE BUTTON 3 ALL LEDS BLINK 3 TIMES
12. Adjust the Pan fader to adjust the mirrors to go across to the other
top corner of the dance floor. By pressing Scene buttons 1 to 4 in
order you should have a box pattern. If you have a problem refer to
Trouble shooting. page??
5. Press the MIDI / REC BUTTON (FIG.7) followed by the SCENE BUTTON
(FIG.5) you wish to copy to.
SCENE EDITING:
This function allows you to make changes in a scene after it has been
programmed.
1. Press the PROGRAM BUTTON (FIG. 6) for three (3) seconds to
activate program mode. The LCD DISPLAY (FIG.3) will indicate
program mode by displaying a continuous fast blinking dot next
to ‘PROG.’
2. Use the UP AND DOWN BANK BUTTONS (FIG.4) to select the bank
that stores the scene you wish to edit.
You can now use these scenes to make scenes 5-8 Same box
patterns with different colors and gobos
3. Select the scene you want to edit by pressing its SCENE BUTTON
(FIG.5).
1. Press SCENE BUTTON 1 make color and gobo adjustments
2. Press and release the MIDI / REC BUTTON (FIG 7.).
3. Then press SCENE BUTTON 5 ALL LEDS BLINK 3 TIMES
4. Press SCENE BUTTON 2 make color and gobo adjustments
5. Press and release the MIDI / REC BUTTON (FIG 7.).
6. Then press SCENE BUTTON 6 ALL LEDS BLINK 3 TIMES
7. Press SCENE BUTTON 3 make color and gobo adjustments
8. Press and release the MIDI / REC BUTTON (FIG 7.).
9. Then press SCENE BUTTON 7 ALL LEDS BLINK 3 TIMES
10. Press SCENE BUTTON 4 make color and gobo adjustments
11. Press and release the MIDI / REC BUTTON (FIG 7.).
13. Then press SCENE BUTTON 8 ALL LEDS BLINK 3 TIMES
THIS GIVES YOU 8 SCENES 2 DIFFERENT COLORED BOX PATTERNS.
ONCE YOU HAVE RECORDED ALL THE SCENES YOU CAN NOW GO
TO PROGRAMMING CHASES PG 12
4. Use the FADERS (FIG.15) to make your desired adjustments.
5. Once you’ve made your changes, press the MIDI / REC BUTTON
(FIG.7) followed by the SCENE BUTTON (FIG.2) that corresponds to
the scene your editing. This will store the edited scene back into
memory.
Be sure to selected the same scene you selected in step 4, otherwise you
may accidentally record over an existing scene.
RESET ALL SCENES:
This function will erase all scenes in all Banks
(ALL Channels of all scenes are reset to 0 output).
1. Press and hold down the PROGRAM button (fig.6)
2. While holding down the PROGRAM BUTTON (FIG.6), press and hold
the BANK DOWN BUTTON (FIG.4).
Elation Professional® - DMX OPERATOR User Manual page 9
Elation Professional® - DMX OPERATOR User Manual page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
RESET ALL SCENES Continued:
PROGRAMMING CHASES:
3. Disconnect the power and release the buttons.
4. Reconnect the power, all scenes should be erased
NOTE: YOU MUST PROGRAM SCENES BEFORE YOU CAN PROGRAM CHASES.
1. Press the PROGRAM BUTTON (FIG. 6) for three (3) seconds to
activate program mode. The LCD DISPLAY (FIG.3) will indicate
program mode by displaying a continuous fast blinking dot next
to ‘PROG.’
2. Select any CHASE 1 TO 6 (FIG 5) to program.
3. Select a desired SCENE (FIG2) from any bank that has been
previously recorded.
4. Press the MIDI/REC BUTTON (FIG.7). All LED’s blink 3 times
5. Repeat steps 3 & 4 as many times as you want.
You may store up to 240 steps into one chase.
6. To exit programming press the PROGRAM BUTTON (FIG. 6) for
three (3) seconds to de-activate program mode. The LCD
DISPLAY (FIG.3) will indicate blackout mode by displaying a
continuous fast blinking dot next to ‘Blackout.’
COPY BANK OF SCENES:
This function will copy the settings of one bank to another.
1. Press the PROGRAM BUTTON (FIG. 6) for three (3) seconds to
activate program mode. The LCD DISPLAY (FIG.3) will indicate
program mode by displaying a continuous fast blinking dot next
to ‘PROG.’
2. Select the BANK (FIG.4) you want to copy
3. Press and release the MIDI/REC BUTTON (FIG.7)
4. Select the BANK (FIG.4) you wish to record to.
5. Press MUSIC/BANK COPY BUTTON (FIG.9), The LCD DISPLAY (FIG.3)
will flash briefly to indicate the function has been completed.
You May now playback the Chase Recorded Pg. 14
DELETE BANK OF SCENES:
1. Press the PROGRAM BUTTON (FIG. 6) for three (3) seconds to
activate program mode. The LCD DISPLAY (FIG.3) will indicate
program mode by displaying a continuous fast blinking dot next
to ‘PROG.’
EDITING CHASES
INSERT A STEP:
2. Select the BANK (FIG.4) you want to delete
1. Press the PROGRAM BUTTON (FIG. 6) for three (3) seconds to
activate program mode. The LCD DISPLAY (FIG.3) will indicate
program mode by displaying a continuous flashing light next to
‘PROG.’
2. Select the CHASE 1 TO 6 (FIG 5) you wish to add a step to.
3. Press and release the TAP SYNC/DISPLAY BUTTON (FIG.11).
The Display will now change to the step you are now in.
4. After selecting the TAP SYNC/DISPLAY (FIG.11) use the UP and
DOWN BUTTONS, to manually scroll to the STEP you wish to insert a
step after.
3. Press and hold the AUTO/DEL BUTTON (FIG.8).
4. While holding down the AUTO/DEL BUTTON (FIG.8) press and hold
the MUSIC/BANK COPY BUTTON (FIG.9) at the same time.
5. Release both buttons at the same time, the LCD DISPLAY (FIG.3)
should flash momentarily to indicated the function completion.
DELETE SCENE :
This function will reset all DMX Channels in a single SCENE back to 0.
5. Press MIDI/REC (FIG.7) the LCD will read one step number higher
6. Press the Scene Button you want to insert
6. Press MIDI/REC (FIG.7) again to insert new step.
7. Press and release the TAP SYNC/DISPLAY (FIG.11) to return the dis
play to normal operation.
1. While pressing and holding AUTO/DEL(FIG.8), Press and release the
SCENE BUTTON (FIG.2) 1-8 you want to delete.
Elation Professional® - DMX OPERATOR User Manual page 11
Elation Professional® - DMX OPERATOR User Manual page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK SCENES & CHASES
MANUAL RUN SCENES:
DELETE A STEP:
1. Press the PROGRAM BUTTON (FIG. 6) for three (3) seconds to
activate program mode. The LCD DISPLAY (FIG.3) will indicate
program mode by displaying a continuous flashing light next to
‘PROG.’
2. Select the CHASE 1 TO 6 (FIG. 5) that contains the step you
would like to delete.
3. Press and release the TAP SYNC/DISPLAY (FIG.11).
4. After selecting the TAP SYNC/DISPLAY (FIG.11) use the UP and
DOWN BUTTONS, to manually scroll to the step you wish to
delete.
1. When power is first turned on, the unit is in manual scene mode.
2. Make sure AUTO & MUSIC LED’S BUTTONS (FIGS. 8 AND 9) are off .
3. Select BANK (FIG.4), using the UP and DOWN BANK BUTTONS
(FIG.4), that store the scenes you wish to run.
4. Press the SCENE BUTTONS (FIG.2) to run the scene you selected.
MANUAL RUN CHASES:
5. When you have reached the step you wish to delete, press and
release the AUTO/DEL (FIG.8).
This function will allow you to manually step through all scenes in
any Chase.
1. Press the PROGRAM BUTTON (FIG. 6) for three (3) seconds to
activate program mode. The LCD DISPLAY (FIG.3) will indicate
program mode by displaying a continuous fast blinking dot next
to ‘PROG.’
2. Execute a chase by selecting one of the eight CHASE BUTTONS
(FIG.5).
5. Press the TAP/SYNC BUTTON (FIG.11).
6. Use the BANK BUTTONS (FIG.4) to scroll through the chase.
Note:Display will show the number of the step in the Chase not the
DELETE A COMPLETE CHASE:
1. Press the PROGRAM BUTTON (FIG. 6) for three (3) seconds to
activate program mode. The LCD DISPLAY (FIG.3) will indicate
program mode by displaying a continuous flashing light next to
‘PROG.’
2. Press and hold down the CHASE BUTTON (FIG.5) that you want
to delete.
3. While holding down the CHASE BUTTON (FIG.5) press and release
the AUTO/DEL BUTTON (FIG. 9).
Scene bank or number
4. Release the CHASE BUTTON (FIG.5). The chase should be
deleted.
AUTO RUN SCENES:
This function will run a bank of programmed scenes in a sequential loop.
DELETE ALL CHASES:
1. Press the AUTO/DEL (FIG.8) to activate Auto Mode. A flashing
light in the LCD DISPLAY (FIG.3) will indicate auto mode.
2. Use the UP and DOWN BANK BUTTONS (FIG.4), to select a bank of
scenes to run.
3. After selecting the bank of scenes you want run, you can use the
SPEED (FIG.13) and FADE (FIG.12) sliders to adjust the scene chase
Note: you can change banks, to run different scene sequences, at any
time by pressing the UP and DOWN BANK BUTTONS (FIG.4).
Note: when Adjusting fade time never make it slower than the Speed
setting or your scene will not be completed before a new step is sent.
This function will allow you to clear all chase memory
(delete all chases).
1. Press and hold down the AUTO/DEL& BANKDOWN BUTTONS FIG.8
2. While holding down the AUTO/DEL & BANKDOWN BUTTONS FIG.8
disconnect the power.
3. Holding down the AUTO/DEL & BANKDOWN BUTTONS FIG.8
reconnect the power hold for 3 seconds LED’s blink all chase
memory should be erased.
Elation Professional® - DMX OPERATOR User Manual page 13
Elation Professional® - DMX OPERATOR User Manual page 14
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTO RUN CHASES:
MIDI OPERATION
1. Select your desired chase by pressing any or all of the six
CHASE BUTTONS (FIG.5).
To Activate MIDI operation:
2. Press and release the AUTO/DEL BUTTON (FIG.8).
3. The corresponding LED will flash in the LCD DISPLAY (FIG.3)
indicating Auto mode is engaged.
4. Adjust the SPEED (FIG.13) and FADE (FIG.12) times to your desired
settings.
5. The chase will now run according to your set speed and fade
time.
Note: You can override the speed and by tapping the
TAP SYNC /DISPLAY BUTTON (FIG.11) three times, the chase would then
run according to the time interval of your taps.
1. Press and hold down the MIDI/REC BUTTON (FIG.7) for three
seconds, the last two digits of the LCD DISPLAY (FIG.3) will BLINK to
indicate MIDI setting.
2. Use the UP AND DOWN BUTTONS (FIG.4) to select the MIDI Channel
1 to 16 you would like to be activated from.
3. Press and hold down the MIDI/REC BUTTON (FIG.7) for three
seconds,to exit this function and MIDI operation is now on.
MIDI CHANNEL SETTING
BANK (Octave)
NOTE NUMBER
FUNCTION
Note: when Adjusting fade time never make it slower than the Speed set-
ting or your scenes will not be completed before a new step is sent.
BANK 1
BANK 2
BANK 3
BANK 4
BANK 5
BANK 6
BANK 7
BANK 8
BANK 9
BANK 10
BANK 11
BANK 12
BANK 13
BANK 14
BANK 15
00 TO 07
08 TO 15
16 TO 23
24 TO 31
32 TO 39
40 TO 47
48 TO 55
56 TO 63
64 TO 71
72 TO 79
80 TO 87
88 TO 95
96 TO 103
104 TO 111
112 TO 119
1 to 8 of Bank 1 on or off
1 to 8 of Bank 1 on or off
1 to 8 of Bank 1 on or off
1 to 8 of Bank 1 on or off
1 to 8 of Bank 1 on or off
1 to 8 of Bank 6 on or off
1 to 8 of Bank 7 on or off
1 to 8 of Bank 8 on or off
1 to 8 of Bank 9 on or off
1 to 8 of Bank10 on or off
1 to 8 of Bank11 on or off
1 to 8 of Bank12 on or off
1 to 8 of Bank13 on or off
1 to 8 of Bank14 on or off
1 to 8 of Bank14 on or off
Note: If you want to include all the Chases PRESS AUTO/DEL BUTTON
before selecting Chase.
MUSIC RUN SCENES:
1. Press the MUSIC/BANK-COPY BUTTON (FIG.9) to turn on the
corresponding LED in the LCD DISPLAY (FIG.3).
2. Select the bank that holds the scenes you wish to chase by using
UP or DOWN BUTTONS (FIG.4), you may also use a MIDI controller
to change the scenes (see MIDI operation).
3. Press MUSIC/BANK COPY BUTTON (FIG.9) to exit.
CHASES
120 TO 125
1 to 6 Chases
MUSIC RUN CHASES:
BLACK OUT
126 BLACKOUT
1. Select your desired chase by pressing one of the six
CHASE BUTTONS (FIG.5).
The DMX OPERATOR only receives MIDI notes and you may have to trans-
pose your keyboard to find the proper notes
2. Press and release the MUSIC/BANK-COPY BUTTON (FIG.9).
3. The corresponding LED will flash in the LCD DISPLAY (FIG.3)
indicating Music mode is engaged.
4. Chase will now run sound.
Elation Professional® - DMX OPERATOR User Manual page 15
Elation Professional® - DMX OPERATOR User Manual page 16
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
TROUBLE SHOOTING
All Scenes,Chases, and Options retained by battery back up
3 space 19” rack mount case
Mirrors don’t respond when I move faders
Make sure address is correct. See Chart pages 20, 21
Make sure speed is adjusted, if available, for faster
movement.Not all Fixtures have a speed adjustment.
If total of XLR cable is more than 90 feet make sure it is
terminated properly.
Reversible DMX polarity out put
MIDI input to control Chase and scene s
192 DMX Channels output 12 Scanners buttons (up to 16 Channels each)
6 Chases of 240 steps
240 Scenes in 30 Banks
Audio Chase
Colors don’t respond when I move faders
Make sure address is correct. See Chart pages 20 21
If total of XLR cable is more than 90 feet make sure it is
Speed and Fade time adjustments
terminated properly.
CABLE TERMINATION
Scenes don’t playback after I record them
Make sure to press MIDI/RECORD BUTTON, before pressing
SCENE BUTTON. LED’s should blink after pressing each
SCENE BUTTON.
When total run of Control cable is 90” or over it is necessary to
terminate the Cable. This can be accomplished as follows.
Make sure you are in the correct Bank that has scenes
1: Many Fixtures have some type of built in termination either auto-matic or
by some type of function switch,select this in the last fixture in the link.
2: Make or buy a Termination Plug and insert it into the last Fixture in the
link.
recorded.
Scenes don’t playback correctly like I recorded them
Was Scanner for all fixtures recorded.
Is Fade Time to long for Speed selected?
Make sure you are in the correct Bank that has scenes
recorded
To make a termination plug use a Male XLR plug and solder a 90 to 120
ohm 1/4 watt resistor between pins 2 & 3 of the plug.
If total of XLR cable is more than 90 feet make sure it is
terminated properly.
Chases don’t playback after I record them
Make sure to press MIDI/RECORD BUTTON, after pressing
SCENE BUTTON. LED’s should blink after pressing MIDI/RECORD
BUTTON.
Make sure you are in the correct Chase that has steps
recorded
If in Auto Mode, is It selected in Display. Did you adjust Speed
after selecting Auto?
Is Fade Time to long for Speed Selected?
If total of XLR cable is more than 90 feet make sure it is
terminated properly.
Elation Professional® - DMX OPERATOR User Manual page 17
Elation Professional® - DMX OPERATOR User Manual page 18
Download from Www.Somanuals.com. All Manuals Search And Download.
DIP SWITCH DMX ADDRESS CHART
DIP SWITCH DMX ADDRESS CHART
WHEN STARTING ADDRESS IS ONE MORE THAN
SELECTED IE: AMERICAN DJ MIGHTY SCAN & MAX
WHEN STARTING ADDRESS IS THE ONE SELECTED
Scanner 7 Channel 97
Scanner 7 Channel 97
Scanner 1 Channel 1
Scanner 1 Channel 1
ON
ON
ON
ON
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
Scanner 8 Channel 113
Scanner 8 Channel 113
Scanner 2 Channel 17
Scanner 2 Channel 17
ON
ON
ON
ON
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
Scanner 9 Channel 129
Scanner 9 Channel 129
Scanner 3 Channel 33
Scanner 3 Channel 33
ON
ON
ON
ON
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
Scanner 10 Channel 145
Scanner 10 Channel 145
Scanner 4 Channel 49
Scanner 4 Channel 49
ON
ON
ON
ON
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
Scanner 11 Channel 161
Scanner 11 Channel 161
Scanner 5 Channel 65
Scanner 5 Channel 65
ON
ON
ON
ON
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
Scanner 6 Channel 81
Scanner 12 Channel 177
Scanner 12 Channel 177
Scanner 6 Channel 81
ON
ON
ON
ON
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
Elation Professional® - DMX OPERATOR User Manual page 19
Elation Professional® - DMX OPERATOR User Manual page 20
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMER SUPPORT
2-YEAR LIMITED WARRANTY
A. Elation Professional® hereby warrants, to the original purchaser, Elation Professional®
products to be free of manufacturing defects in material and workmanship for a period of 2
Years (730 days) from the date of purchase. This warranty shall be valid only if the product
is purchased within the United States of America, including possessions and territories.
It is the owner’s responsibility to establish the date and place of purchase by acceptable
evidence, at the time service is sought.
Elation Professional® provides a customer support line, to provide set up
help and to answer any question should you encounter problems during
your set up or initial operation. You may also visit us on the web at www.
americandj.com for any comments or suggestions. Service Hours are
Monday through Friday 9:00 A.M. to 5:00 P.M., Pacific Standard Time.
B. For warranty service, send the product only to the Elation Professional® factory. All
shipping charges must be pre-paid. If the requested repairs or service (including parts
replacement) are within the terms of this warranty, Elation Professional® will pay return ship-
ping charges only to a designated point within the United States. If the entire instrument
is sent, it must be shipped in its original package. No accessories should be shipped with
the product. If any accessories are shipped with the product, Elation Professional® shall
have no liability whatsoever for loss of or damage to any such accessories, nor for the safe
return thereof.
Voice:
Fax:
(323) 582-3322
(323) 582-2610
E-mail: [email protected]
Warning! To prevent or reduce the risk of electrical shock or fire, do not
expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures warranty.
In the unlikely event your unit may require service please contact Elation.
C. This warranty is void if the serial number has been altered or removed; if the product is
modified in any manner which Elation Professional® concludes, after inspection, affects the
reliability of the product; if the product has been repaired or serviced by anyone other than
the Elation Professional® factory unless prior written authorization was issued to purchaser
by Elation Professional®; if the product is damaged because not properly maintained as set
forth in the User Manual.
D. This is not a service contract, and this warranty does not include maintenance, cleaning
or periodic check-up. During the period specified above, Elation Professional® will replace
defective parts at its expense, and will absorb all expenses for warranty service and repair
labor by reason of defects in material or workmanship. The sole responsibility of Elation
Professional® under this warranty shall be limited to the repair of the product, or replace-
ment thereof, including parts, at the sole discretion of Elation Professional®. All products
covered by this warranty were manufactured after January 1, 1990, and bear identifying
marks to that effect.
Specifications are subject to change without notice!
E. Elation Professional® reserves the right to make changes in design and/or improve-
ments upon its products without any obligation to include these changes in any products
theretofore manufactured.
F. No warranty, whether expressed or implied, is given or made with respect to any acces-
sory supplied with products described above. Except to the extent prohibited by applicable
law, all implied warranties made by Elation Professional® in connection with this product,
including warranties of merchantability or fitness, are limited in duration to the warranty
period set forth above. And no warranties, whether expressed or implied, including warran-
ties of merchantability or fitness, shall apply to this product after said period has expired.
The consumer’s and or Dealer’s sole remedy shall be such repair or replacement as is
expressly provided above; and under no circumstances shall Elation Professional® be liable
for any loss or damage, direct or consequential, arising out of the use of, or inability to use,
this product.
©Elation Professional®
Elation Professional® World Headquarters
4295 Charter Street Los Angeles, CA 90058 USA
Tel: 323-582-2650 Fax: 323-582-2610
G. This warranty is the only written warranty applicable to Elation Professional® Products
and supersedes all prior warranties and written descriptions of warranty terms and condi-
tions heretofore published.
Elation Professional® - DMX OPERATOR User Manual page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
|