MODEL
CD3424
ESN E3 High-Power CD Receiver with
MP3 Decoder and Remote
OWNER'S MANUAL
We appreciate your purchase of this receiver.
Please read through this manual for correct operation.
We suggest that after reading it you keep this manual
in a safe place for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning
• Do not place the vinyl storage bag over a person. It may cause
a serious accident or death by suffocation.
• Do not adjust the controls while driving the car. To adjust the
controls, stop the car in a safe location.
• To prevent accidents, store batteries for the remote control out
of the reach of small children. In case a child swallows a
battery, consult a physician immediately.
• Do not disassemble or rebuild this product. Doing so may
cause an accident, fire or electrical shock.
• When it is necessary to replace the fuse, always use a fuse of
the correct rating (number of amperes). Use of fuses with
higher amperage ratings may cause a fire.
• Do not operate the product in a malfunctioning condition, for
instance, when the audio does not play. Doing so may result in
an accident, fire or electrical shock.
• If an abnormal situation occurs, such as foreign matter entering
or liquid splashing on the product, or smoke or a strange odor
emitting from the unit, shut off the product immediately and
consult the dealer from whom you purchased it. Continued
operation may cause an accident, fire or electrical shock.
• Do not install this product in locations where it may obstruct the
driver's view, or where it may endanger passengers in the
vehicle. Otherwise, an accident or injury may result.
• To prevent damaging the vehicle, confirm the locations of
hoses, electrical wiring, and the fuel tank prior to drilling holes
to install this product. Also, take care so that the product does
not interfere, not come in contact with them. Otherwise, a fire
may result.
• Do not install this product in locations where it may interfere
with the operation of the steering wheel, shift lever, brake
pedal, etc. Otherwise, an accident or injury may result.
• When installing this product, never use existing nuts or bolts
that secure parts of the fuel tank, or the steering or braking
systems. Otherwise improper steering or braking or a fire may
result.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Warning
• To prevent a short circuit from occurring, disconnect the
battery's negative terminal before installing this product.
Otherwise, an electric shock or injury may result.
• When using an existing nut and/or bolt from the vehicle to
ground this product, do not use any that secure parts of the
steering or braking systems. Otherwise, an accident may result.
• Bundle cables and harnesses with electrical tape or wire ties to
prevent them from interfering with moving parts. If they should
entangle the steering wheel, shift lever or brake pedal, an
accident may result.
• Never supply power to another electrical appliance by splicing
or tapping into this product's power lead (wire). Otherwise, the
current capacity of the wire will be exceeded, resulting in a fire
or electric shock.
• Never attempt to disassemble or modify the product.
Otherwise, an accident, fire or electric shock may result.
• When replacing fuses, be sure to use fuses of the specified
capacity (amperage). Otherwise, damage to the unit, fire or an
electric shock may result.
• When installing the product into a vehicle with a passenger
side air bag, do not secure it to the air bag's cover or in places
where it may impede air bag deployment. Otherwise, proper air
bag operation may not be ensured in the event of an accident,
causing injury or death.
• When making holes using a drill or similar tool, be sure to wear
protective eyewear. Otherwise, an injury such as loss of
eyesight may result.
• Exposed wires must be insulated with electrical tape.
Otherwise, a short circuit, fire, or electric shock may result.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Caution
• Play the audio at a moderate volume level that permits you to
hear sounds from outside the car. Driving without being able to
hear outside sounds may result in an accident.
• Keep foreign objects out of the disc slot. They may cause fire
or electrical shock. Another possibility is that discs may be
damaged or become stuck.
• Do not stick your fingers or hands into the disc slot. Doing so
may cause personal injury.
• This product must be operated only as on-board equipment, or
it may cause electrical shock or injury.
• Do not play distorted sounds for long periods of time;
the speakers may overheat and cause a fire.
• This product uses an invisible laser light. In case a problem
develops, be sure to consult the dealer from whom you
purchased the product. Do not disassemble or rebuild the unit;
rebuilding it may expose you and others to a dangerous laser
emission (which would damage eyesight) or cause an
accident.
• Never use batteries other than those specified. Do not mix new
and old cells. Doing so may cause a fire or personal injury due
to a battery explosion or chemical leaks.
• Pay attention to the (+) and (-) polarity of the battery when
installing them in the product. Incorrect installation may cause
personal injury or product damage spoilage due to a battery
explosion or chemical leakage.
• For best results, this product should be installed by a
professional installer.
Contact the dealer whom you purchased the product for an
appointment.
• When installing this product, be sure to use the supplied
mounting hardware. If parts other than those supplied are
used, the unit may be damaged internally, or may not be held
in place securely and become dislodged.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Caution
• Avoid installing this product in places where it may get wet,
such as near windows, or in places that are moist or dusty.
Presence of liquid, moisture or dust inside this product can
cause short circuiting, resulting in smoke or fire.
• Do not install this product in locations where it cannot be
fastened securely, such as places subject to frequent vibration.
Otherwise, it may become dislodged and cause an accident or
injury.
• Do not block this product's vent or heat sink. If either is
blocked, excessive heat build-up may occur and cause a fire.
• If this product is not connected properly, a short circuit, fire or
accident may occur.
• When routing cables, use care so they do not contact sharp
metal parts such as brackets or screw tips. Otherwise, a short
circuit, electric shock, fire or accident may result.
• Do not obstruct the vent on this product. If blocked, excessive
heat build-up may occur and cause a fire.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Table of Contents
Operating precautions ............................................ 11
Notes on operation ..................................................................... 11
About compact discs .................................................................. 12
About cleaning a CD .................................................................. 14
Names of controls and parts .................................. 15
ESN security operating procedure ......................... 16
About ESN .................................................................................. 16
How to operate the ESN (Key CD) security ............................... 17
How to program the Key CD ................................................ 17
How to cancel the Key CD ................................................... 18
How to change the Key CD .................................................. 19
How to resume normal operation (ESN security lock out) ... 19
What happens if an incorrect CD is inserted? ...................... 20
How to turn the security indicator on/off ..................................... 21
How to read the Electronic Serial Number ................................. 21
Basic operation ........................................................ 22
Turning the power on and off ..................................................... 22
Listening to a CD ........................................................................ 23
Listening to the tuner .................................................................. 24
Adjusting audio volume .............................................................. 24
Switching audio control modes ................................................... 25
VOL (VOLUME) Mode ......................................................... 25
BASS Mode ......................................................................... 25
TREB (TREBLE) Mode ........................................................ 25
BAL (BALANCE) Mode ........................................................ 26
FAD (FADER) Mode ............................................................ 26
NON-F (NON-FADER) Mode ............................................... 26
XO-FR (Front/Rear) Mode ................................................... 26
XO-NF (NON-FADER) Mode ............................................... 27
NF-PH (NON-FADER PHASE) Mode .................................. 27
Enabling the loudness control .................................................... 27
Making changes with Function Mode ......................................... 28
Disabling the guide tone feature (for button operation) ........ 28
Setting the time .................................................................... 29
Download from Www.Somanuals.com. All Manuals Search And Download.
7
How to operate the CD player ................................. 30
Listening to CDs ......................................................................... 30
Advancing to the next track or returning to the beginning of the
track being played ...................................................................... 31
Fast Forward/Rewind ................................................................. 31
Playing the beginning of tracks (SCAN) ..................................... 31
Repeating the same track (REPEAT) ......................................... 32
Playing tracks in random order (RANDOM) ............................... 32
Ejecting the disc ......................................................................... 33
Displaying CD TEXT .................................................................. 33
How to operate the MP3 player ............................... 34
About MP3 .................................................................................. 34
What is MP3? ....................................................................... 34
Playable MP3 file standards ................................................ 34
ID3 tags ................................................................................ 34
Media ................................................................................... 35
Format of discs .................................................................... 35
File names ........................................................................... 36
Multi-sessions ...................................................................... 36
Playing MP3 ......................................................................... 36
MP3 playing time display ..................................................... 36
Display order of MP3 file/folder names ................................ 36
Listening to MP3 file ................................................................... 37
Advancing to the next track (file) or
returning to the beginning of the track (file) being played .......... 38
Fast Forward/Rewind ................................................................. 38
Skipping to the next or previous folder ....................................... 38
Return to the root directory of the CD ........................................ 38
Playing the beginning of files (SCAN) ......................................... 39
Repeating the same file (REPEAT) ............................................ 39
Playing files in random order (RANDOM) .................................. 40
Displaying title ............................................................................ 40
How to operate the tuner ........................................ 41
Tuning to a station ...................................................................... 41
Entering stations into memory automatically
(The automatic preset mode: ASM) .......................................... 42
Manually setting stations into memory ....................................... 43
Preset station scan ..................................................................... 44
Switching the display .................................................................. 44
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Changing the reception sensitivity for automatic scanning ........ 45
Changing the radio band location ............................................... 45
FM reception characteristics ...................................................... 46
FM reception differs from AM ............................................... 46
Fading out ............................................................................ 46
Reception area of FM broadcasts ........................................ 47
Multipath .............................................................................. 47
How to use a Card remote control ......................... 48
Precautions in use of the remote control .................................... 48
Cleaning the remote control ....................................................... 48
Turning the power on/off ............................................................ 49
Adjusting the audio volume ........................................................ 49
Cutting the volume instantly (muting) ................................... 49
Switching playback modes ......................................................... 50
How to play the tuner ................................................................. 50
Selecting the FM/AM band ................................................... 50
Selecting a station (manually or automatically) .................... 51
Selecting preset stations ...................................................... 51
How to play CDs ......................................................................... 51
Switching disc mode ............................................................ 51
Advancing to the next track or returning to the beginning
of the track being played ...................................................... 52
Skipping to the next or previous disc ................................... 52
Replacing the battery ................................................................. 53
How to use an optional NOB remote control ........ 54
Turning the power on/off ............................................................ 54
Adjusting the audio volume ........................................................ 54
Cutting the volume instantly (muting) ................................... 54
Switching playback modes ......................................................... 55
How to play the tuner ................................................................. 55
Selecting the FM/AM band ................................................... 55
Selecting a station (manually or automatically) .................... 56
Selecting preset stations ...................................................... 56
How to play CDs ......................................................................... 56
Switching disc mode ............................................................ 56
Advancing to the next track or returning to the beginning
of the track being played ...................................................... 57
Skipping to the next or previous disc ................................... 57
Replacing the battery ................................................................. 58
Download from Www.Somanuals.com. All Manuals Search And Download.
9
How to operate the receiver with an optional
CD changer connected............................................. 60
Listening to a CD......................................................................... 60
Advancing to the next track or returning to the beginning of
the track being played ................................................................. 60
Fast Forward/Rewind .................................................................. 60
Playing the beginning of tracks (SCAN)...................................... 61
Repeating the same track (REPEAT).......................................... 61
Playing tracks in random order (RANDOM) ................................ 62
Skipping to the next or previous CD............................................ 62
Specifying a CD to play............................................................... 63
Switching the display................................................................... 63
If you have a question: ............................................ 64
Displayed information (for troubleshooting) ................................ 65
Specifications .......................................................... 68
Before installation .................................................... 69
Components ............................................................................... 69
Installation angle ........................................................................ 69
Mounting instruction ............................................... 70
Mounting the main unit ............................................................... 70
Names of lead wires and destinations ........................................ 72
System ....................................................................................... 73
How to contact customer service .......................... 78
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Operating precautions
Operating precautions
<Your CD3424 will perform well over a long period of time through correct
handling and care.>
Notes on operation
• For your safety, play only at volume levels that allow outside sounds to be
heard.
• We recommend using with this player a disc with
the logo shown to the left.
• You can play music CDs(CD-R/CD-RW) on this
player. Be sure to use discs that have been
properly processed.
Depending on the editing equipment used, some
discs may not play properly.
• Do not insert anything other than a CD into the
disc slot.
Do not insert any foreign objects, such as coins or
credit cards, into the disc slot. Be especially
watchful of children’s mischief in this regard.
• Avoid severe mechanical shock.
When the player is subjected to severe vibration
while traveling over a rough surface, playback
may be intermittent. When a situation like this
occurs, resume playback after returning to a
smoother road.
• About dew condensation.
In cold or rainy weather, just as the interior glass
surface gets fogged, dew (water condensation)
may also settle on the deck. When this occurs,
disc playback may become intermittent or
impossible. Dehumidify the air in the vehicle for a
while before resuming playback.
• Cleaning the disc slot.
The disc slot tends to get dusty. Clean it
occasionally to prevent accumulated dust from
scratching the discs.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Operating precautions
About compact discs
• The signal recorded on a compact disc is read by a laser beam, so
nothing touches the disc surface. A scratch on the recorded surface or a
badly warped disc may cause deteriorated sound quality or intermittent
playback. Observe the following precautions to ensure high quality sound
performance:
• Do not leave an ejected disc in the disc slot
for very long; the disc may warp. Discs
should be stored in their cases and kept
away from high temperature and humidity.
• Do not stick a piece of paper or tape on, nor
write on or scratch either side of a disc.
• Discs spin at a high speed inside the deck.
Keep cracked or warped discs out of the
player to avoid damaging it.
• Avoid touching the recorded surface when
handling a disc; handle discs by their edges.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Operating precautions
About brand new CDs
About CD accessories
• You may notice that some brand
new discs are rough around the
center hole or outside edge.
Remove the rough edges with
the side of a ballpoint pen, etc.
Rough edges may prevent
proper loading in the deck.
Flakes from the rough edges
may also stick to the recorded
surface and interfere with
playback.
• Do not use accessories
(stabilizers, protective seals, laser
lens cleaners, etc.) sold for
“improving sound performance”
or “protecting CDs.” The changes
in CD thickness or outside
dimensions made by these
accessories may cause problems
in the player.
Rough Edges
Ballpoint
pen
• Please be sure NOT to attach any
ring-shape protector (or other
accessory) to your discs. Those
protectors are commercially
available and said to protect disc
and to improve sound quality
(and antivibration effect), but they
can do more harm than good in
regular uses. The most common
problems are disc insertion, disc
ejections, and won't play
problems due to the protector
ring that came off in the disc
mechanism.
Rough
Edges
Flakes
Recorded surface
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Operating precautions
About borrowed CDs
About irregularly-shaped CDs
• Specially-shaped CDs, like
heart-shaped or octagonal CDs,
cannot be played. Do not
attempt to play them, even with
an adapter, since they may
damage the player.
• Do not use a CD with glue or
remnants of adhesive tape or
labels. They may cause the CD
to get stuck inside or damage
the deck.
How to remove CDs
• When removing the ejected disc,
pull it straight out along the slot.
Pressing downward in the
process may scratch the
recorded surface of the disc.
OKAY
About cleaning a CD
• Use a commercially available compact disc
cleaner to clean a CD, wiping lightly from the
center to the edge.
• Do not use benzine, thinner, LP record spray
or other cleaners on CDs. They may damage
a CD’s finish.
XXXX
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Names of controls and parts
Names of controls and parts
①②
③
④
③
⑤ ⑥
⑦
⑬
⑫⑪ ⑩
⑨ ⑧ ⑥
Switches disc modes.
Ejects compact disc.
[DISC] button
[
(EJECT) ] button
Selects radio preset channels and performs disc mode
functions.
Buttons [1] to [6]
Inserts compact discs.
Disc slot
Switches screen display.
[DISP] button
Automatically finds radio reception and fast forward/rewind.
Selects radio stations and CD tracks.
Turns function mode ON/OFF.
[SEEK /FAST ] button
[SEL] button
[FUNC] button
Returns to previous screen.
[RTN] button
Resets deck functions to default settings.
Turns deck power ON/OFF.
[RESET] button
[PWR] button
Switches to radio mode and switches radio bands.
Adjusts volume and performs other functions.
[FM AM] button
[AUDIO CONTROL] button
Download from Www.Somanuals.com. All Manuals Search And Download.
15
ESN security operating procedure
ESN security operating procedure
About ESN
This deck incorporates ESN (ECLIPSE Security Network). The ESN is
a security system which disables all deck functions when the power
is restored if the deck is stolen from the vehicle. Turning the power of
the deck off or switching the vehicle's ignition switch off activates the
security feature.
Setting or canceling of the security feature can be done with a "Key
CD". It is necessary to register an music CD as the "Key CD" in
advance.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
ESN security operating procedure
Button [6]
[FUNC] button
How to operate the ESN (Key CD) security
How to program the Key CD
Check that the Power is OFF.
1
2
Press and hold button [6], then the [FUNC] button, and
hold both for more than one second.
A [SEC] message appears, then in two seconds it will
change to [DISC].
The CD3424 is now ready to accept your Key CD in the CD
slot.
If a CD has already been inserted, a [SEC] message appears,
and then the CD is ejected.
ATTENTION
Insert the CD into the slot.
3
A [SEC] message appears, then the Key CD is ejected.
•If there is a problem with the inserted CD, an [ERR] message
will appear for two seconds and the CD will be ejected. Reinsert
the ejected CD.
ATTENTION
•If a CD causes the [ERR] message to appear twice in a row, a
[CHANGE] message will appear for two seconds. Try another
CD.
•The Security indicator will flash whenever the vehicle’s ignition
is switched off.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
ESN security operating procedure
Button [6]
[FUNC] button
How to cancel the Key CD
Turn OFF the Power.
1
2
Press and hold button [6], then the [FUNC] button, and
hold both for more than one second.
A [SEC] message appears, then in two seconds it will
change to [DISC].
The CD3424 is now ready to accept your Key CD in the CD
slot.
If a CD has already been inserted, a [SEC] message appears,
and then the CD is ejected.
ATTENTION
Insert your Key CD into the slot.
A [CANCEL] message appears, then the Key CD is
ejected.
3
The Key CD is cancelled.
•This process cancels the protection for the ESN deck.
•If power to the ESN deck is disconnected, then reconnected, a
Key CD will not need to be inserted in order to return the unit to
normal operation.
ATTENTION
•Inserting a CD other than the Key CD will not cancel the
protection. Instead, the display [ERR] for two seconds, then the
normal CD playback mode will activate.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
ESN security operating procedure
How to change the Key CD
First, cancel the existing Key CD.
Refer to “How to cancel the Key CD.”
1
2
Next, program a new Key CD.
Refer to “How to program the Key CD.”
How to resume normal operation (ESN security lock out)
If power is disconnected while ESN security is active (a Key
CD was programmed), operation is disabled until power is
restored and the unit unlocked. Follow this procedure to
resume normal operation.
When the power is turned on after disconnecting the
battery power, a [SEC] message will appear for two
seconds. Thereafter, the message changes to [DISC]
and the CD3424 is ready to accept your Key CD into the
slot.
1
Insert your Key CD into the slot.
2
If the correct CD is inserted, an [OK] message will appear
for two seconds and the CD will begin playing.
•If an incorrect CD is inserted, an [ERR_] ("ERR" and error
number) message will appear for two seconds, after which the
CD will be ejected.
ATTENTION
•If [ERR5] (the 5th time an error has occurred) appears, [HELP]
will appear, after which the CD will be ejected. When [HELP]
appears, carry out the operations for an ESN security lock out
by following the procedure in "What happens if an incorrect CD
is inserted?" (See next page).
•You must use the same CD used for Key CD programming; a
duplicate CD may not work properly.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
ESN security operating procedure
Button [6]
[FUNC] button
What happens if an incorrect CD is inserted?
After the 5th incorrect attempt, the display reads [HELP]
for five seconds.
[HELP] will appear for five seconds, after which the serial
number will appear.
1
2
Press button [6], then the [FUNC] button, and hold them
for five seconds.
After the [SEC] message will appear for two seconds,
rolling code will appear.
Press the [FUNC] button.
A [DISC] message appears.
You will have five more attempts the correct disc.
3
4
Insert your Key CD into the slot.
If the correct CD is inserted, an [OK] message will appear
for two seconds and CD will be ejected.
•If an incorrect CD is inserted, an [ERR_] ("ERR" and error
number) message will appear for two seconds, after which the
CD will be ejected.
ATTENTION
•This process cancels the protection for the ESN deck.
ꢀ Note ꢀ
If after five tries the correct Key CD is not inserted, the display
reads [CALL800]; the unit must be returned to Eclipse to be
reset. In this case, please contact your Eclipse dealer for
assistance. For country-specific customer service information,
refer to "How to contact customer service" on page 78.
Your key CD can be easily forgotten. Write the
album name in a reminder note (See Page 81).
Download from Www.Somanuals.com. All Manuals Search And Download.
20
ESN security operating procedure
Button [2]
Button [4]
[FUNC] button
How to turn the security indicator on/off
Once ESN security is activated, the indicator flashes whenever the
vehicle’s ignition is turned off, warning potential thieves that the unit
is protected. However, if you do not want this visible deterrent, it may
be turned off.
With the power OFF, press button [2], then the [FUNC]
button and hold both for more than one second.
1
[IND. FLASH] or [IND. -----] appears on the display.
2
[IND. FLASH] means the security indicator will flash when the
vehicle’s ignition is off, and [IND. -----] means it will not. Repeat
the above steps to reactivate the flash mode.
How to read the Electronic Serial Number
Turn OFF the Power.
1
Press button [4], then the [FUNC] button, and hold both
for more than one second.
2
[ESN] appears on the display, followed by an eight-digit
number; this number is your electronic serial number (ESN).
You may use this number to identify your Eclipse CD3424 in
the event it is recovered after being stolen.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Basic operation
Basic operation
[PWR] button
This section covers basic operating procedures. For additional
details, please refer to the sections on specific functions.
Turning the power on and off
Turning the power on and off.
When the power is turned on, the state used when the power was
turned off such as CD and tuner playing is restored.
When the vehicle has no ACC position on the ignition switch, care is
needed when turning off the deck. Follow Step 2 or Step 3 when
turning off the power.
When power is OFF, press [PWR] button.
1
The power will come ON.
When the deck's power is turned on for the first time or if the
battery terminals have been disconnected because of a reason
ATTENTION
such as vehicle maintenance and the power is then turned back
on, the deck will start up in FM1 mode. After this, the broadcast
stations will be searched for automatically and stored in buttons
[1] to [6].
When power is ON, press the [PWR] button for less than
two seconds.
2
The power will go OFF and the deck will be in Standby.
If you press the [PWR] button again for more than one second,
the power will go completely off.
When power is ON, press the [PWR] button for more
than two seconds.
3
The power will go completely OFF.
If a car is not equipped with an ACC position (for example, a
European car), keep the [PWR] button depressed for more than
ATTENTION
two seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Basic operation
[DISC] button
Listening to a CD
Insert a CD into the disc slot, label side up.
1
The CD will start playing.
When a CD is already loaded, press the [DISC] button to switch
to the CD mode.
ATTENTION
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Basic operation
Buttons [1] to [6]
[FM AM] button
[SEEK ] button
[SEL]
button
[AUDIO CONTROL] button
[FAST ] button
Listening to the tuner
Press the [FM AM] button.
1
This will turn the tuner on.
Press the [FM AM] button to switch to the desired FM or
AM bands.
2
3
4
Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in
order each time the button is pressed.
Turn the [SEL] button to the left or right to tune to a
station.
Turn to the right: Turnes to higher frequencies.
Turn to the left: Turnes to lower frequencies.
Press the [SEEK /FAST ] button to start the automatic
station search.
[SEEK ] button: Starts searching toward higher frequencies.
[FAST ] button: Starts searching toward lower frequencies
If stations have been stored in memory, pressing a button
from [1] to [6] will directly select a station. (Refer to the section
ATTENTION
“Manually setting stations into memory” on page 43)
Adjusting audio volume
Turn the [AUDIO CONTROL] button to the left or right.
1
Turn to the right: Increases the volume.
Turn to the left: Decreases the volume.
Do not adjust the volume or other controls while driving the
vehicle. Do so only while parked in a safe location.
Warning
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Basic operation
[AUDIO CONTROL] button
Switching audio control modes
Various audio control modes may be fine-tuned using this
procedure.
Press the [AUDIO CONTROL] button for less than one
second to select the item to be adjusted.
1
Modes will switch in the order shown below each time the
button is pressed.
VOL
BASS
TREB
BAL
FAD
NF-PH
XO-NF
XO-FR
NON-F
VOL (VOLUME) Mode
Adjusts volume.
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Increases the volume.
Turn to the left: Decreases the volume.
BASS Mode
Adjusts bass level. Bass mode can be adjusted for each
source (CDP/CDC, FM and AM).
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Emphasizes low sounds.
Turn to the left: Softens low sounds.
TREB (TREBLE) Mode
Adjusts treble level. TREBLE mode can be adjusted for each
source (CDP/CDC, FM and AM).
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Emphasizes high sounds.
Turn to the left: Softens high sounds.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Basic operation
[AUDIO CONTROL] button
BAL (BALANCE) Mode
Adjusts left/right speaker balance.
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Emphasizes right speakers.
Turn to the left: Emphasizes left speakers.
FAD (FADER) Mode
Adjusts front/rear speaker balance.
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Emphasizes front speakers.
Turn to the left: Emphasizes rear speakers.
NON-F (NON-FADER) Mode
Adjusts non-fader level (for connected sub-woofers, etc.).
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Increases level.
Turn to the left: Decreases level.
XO-FR (Front/Rear) Mode
Here, the HPF (high-pass filter) to the front and rear pre-outs
can be switched ON and OFF.
Since the high-pass filter passes only higher ranges (lower
ranges are cut off), efficient playback is enabled by cutting off
lower-range elements not needed for the mid to higher range
speaker.
Turn the [AUDIO CONTROL] button to the left or right to switch
Cross Over (FR) ON/OFF.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Basic operation
[AUDIO CONTROL] button
XO-NF (NON-FADER) Mode
Here, the LPF (low-pass filter) to the non-fader pre-out can be
switched ON and OFF.
Since the low-pass filter passes only lower ranges (higher
ranges are cut off), efficient playback is enabled by cutting off
mid to higher range elements not needed for a woofer.
Turn the [AUDIO CONTROL] button to the left or right switch
Cross Over (NF) ON/OFF.
NF-PH (NON-FADER PHASE) Mode
The merging of sound between the front and rear speakers and
the woofer can be improved by selecting the phase.
Switch the phase to a phase which lets the speakers combine
without any disharmony.
Turn the [AUDIO CONTROL] button to select NORMAL or
REVERSE.
NORM: Normal phase
REV : Reverse phase
Enabling the loudness control
The loudness control may be turned on to emphasize low and high
frequencies at low volume levels.
Loudness compensates for the apparent weakness of low and high
frequencies at low volume by boosting the bass and treble levels.
Press and hold the [AUDIO CONTROL] button until the
[LOUD ON] display appears on the screen.
1
To disable the loudness feature, repeat the above procedure to
display the [LOUD OFF] indication.
ATTENTION
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Basic operation
[SEL]
button
[RTN] button
[FUNC] button
Making changes with Function Mode
A variety of settings can be changed.
Press the [FUNC] button.
1
The function mode is activated.
Turn [SEL] button in either direction to display setting
items for selection.
2
Setting items will be displayed in the following order when the
[SEL] button is turned to the right.
GUIDE TONE
CLOCK ADJ
Disabling the guide tone feature (for button operation)
The receiver is set at the factory to emit a beep tone in
response to button operation. The guide tone feature may be
disabled in the following procedure:
Turn [SEL] button to select GUIDE TONE.
1
2
Press the [SEL] button.
The Guide Tone Mode will be switched ON/OFF.
Turn [SEL] button to select ON or OFF.
3
4
Press the [RTN] button.
At this time, other adjustments can also be made in
Function Mode.
Press the [FUNC] button to exit Function Mode.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Basic operation
[SEEK ] button
[SEL]
button
[FAST
button
]
[RTN] button
[FUNC] button
Setting the time
This receiver uses the 12-hour display notation.
Turn [SEL] button to select CLOCK ADJ.
1
2
Press the [SEL] button.
The clock adjustment mode is activated.
Turn [SEL] button to display the item to be selected for
adjustment.
3
Hours, minutes or exact hour will be switched each time the
button is turned.
Press the [SEEK /FAST ] button.
4
[SEEK ] button: Turns the time forward.
[FAST ] button: Turns the time back.
To set the clock to 0 minutes, 0 seconds (an exact hour),
press the [SEEK /FAST ] button.
For example:
At 3:29: Pressing the [SEEK /FAST ] button returns to 3:00.
At 3:30: Pressing the [SEEK /FAST ] button advances to 4:00.
Press the [RTN] button.
At this time, other adjustments can also be made in
Function Mode.
5
6
Press the [FUNC] button to exit Function Mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
How to operate the CD player
How to operate the CD player
[DISC] button
First press the [DISC] button to switch to the disc mode. It is
assumed here that a CD has already been loaded into the unit.
Listening to CDs
Press the [DISC] button.
1
This starts CD play.
If an external CD changer is connected, each additional press
of the [DISC] button will switch modes from CD changer 1 ➔
CD changer 2 ➔ CD player.
A changer or player with no discs loaded will be skipped.
•Playback may be intermittent when there is a scratch on a CD
or when the recorded side is dirty.
Caution
•Only two external CD changers may be connected.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
How to operate the CD player
Button [4]
[SEEK ] button
[SEL]
button
[FAST ] button
Advancing to the next track or returning to
the beginning of the track being played
Turn the [SEL] button to the left or right.
1
Turn to the right: Advances to the next track.
Turn to the left: Returns to the beginning of the track being
played. (Repeat turning for previous tracks.)
Fast Forward/Rewind
Fast forward or rewind the song currently being played.
Press and hold the [SEEK ] or [FAST ] button.
1
[SEEK ] button: Fast forward.
[FAST ] button: Rewind.
Playing the beginning of tracks (SCAN)
Press button [4].
1
Pressing the button causes the player to move up to the next
track and play it for 10 seconds, then move up to the next track
and play it for 10 seconds, and so on until the button is
pressed again.
•To continue playing a desired track, press the button again to
stop scanning.
ATTENTION
•After the entire disc is scanned once, ordinary playback starts
from the point where scanning started.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
How to operate the CD player
Buttons [5] and [6]
Repeating the same track (REPEAT)
Press button [5] to repeat the track being played.
1
To cancel, press button [5] again.
Playing tracks in random order (RANDOM)
Press button [6] to play the tracks in random order.
1
To cancel, press button [6] again.
•Doing random playback, press button [5] to repeat the track
being played. To cancel repeat play (go back to random play),
ATTENTION
press button [5] again.
During playback of a particular track: The track being played is
played repeatedly.
While searching: The following track is played repeatedly.
•Occasionally the same track happens to be played (selected)
two or more times in a row; this is normal operation and is no
sign of a problem.
•When any of the functions - “Playing the beginning of tracks,”
“Repeating the same track” and “Playing tracks in random
order” - is selected, a message such as [SCAN], [REPEAT] or
[RANDOM] appears on the display to verify the current function.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
How to operate the CD player
[DISP] button
[
(EJECT)] button
Ejecting the disc
Press the [ (EJECT)] button.
1
Disc is ejected.
Displaying CD TEXT
Only the built-in CD player supports CD TEXT. It can not be
displayed with the optional CD changer. If the CD came with a logo
shown below, it is recorded with a disc title and track titles. These
information will be displayed during playback.
Press the [DISP] button.
1
Each time the button is pressed, the following will be displayed
in order.
Elapsed time ➔ Disc title/Track title* ➔ Clock
*: The display are shows a maximum of 10 characters and then scrolls
to display the remaining characters.
After the disc title is displayed, the track title will be displayed by
scrolling. After the track title is scrolled the display will be fixed.
If the CD does not contain any text data, "NO TITLE" will appear.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
How to operate the MP3 player
How to operate the MP3 player
About MP3
The making of MP3 files by recording from sources such as
broadcasts, records, recordings, videos and live performances
ATTENTION
without permission from the copyright holder for uses other than
personal enjoyment is prohibited.
What is MP3?
MP3 (MPEG Audio Layer III) is a standard format for audio compression
technology. By using MP3, a file can be compressed to one-tenth the size
of the original.
This deck has limitations on MP3 file standards and recorded media and
formats that can be used.
Playable MP3 file standards
• Supported standards: MPEG-1 Audio Layer III
MPEG-2 Audio Layer III
MPEG-2.5 Audio Layer III
• Supported sampling frequencies: 32, 44.1, 48 (kHz)
• Supported bit rate: 8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 160,
192, 224, 256, 288, 320 (kbps)
* Supports VBR.
* Does not support free format.
• Supported channel modes: stereo, joint stereo, dual channel, monaural
ID3 tags
MP3 files have an "ID3 Tag" that allows input of information so that data
such as song title and artist can be saved.
This deck supports ID3v.1.0 and ID3v.1.1 tags.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
How to operate the MP3 player
Media
Media capable of playing MP3 includes CD-R and CD-RW discs.
Compared to CD-ROM media commonly used for music discs, CD-R discs
are fragile in high temperature/high humidity environments and one section
of the CD-R may become incapable of playback. Fingerprints or scratches
on the disc may prevent playback or cause skipping during playback.
Sections of a CD-R may deteriorate if left inside a vehicle for long periods of
time. It is also recommended that CD-R discs be kept in a light-blocking
case because the discs are vulnerable to ultra-violet light.
Format of discs
The format of discs to be used must be ISO9660 Level 1 or Level 2.
Control items for this standard are as follows:
• Maximum directory layers:
8 layers
• Maximum characters for folder names/file names: 40 (including "." and 3
letter file extension)
• Allowable characters for folder names/file names: A~Z, 0~9, _ (underscore)
• Number of files/folders possible on a single disc: 512
[Configuration example for CD supporting MP3]
Root directory (F1)
F2
Folder 2
001.mp3
002.mp3
003.mp3
004.txt
Number of files/folders possible on a single
disc is 512.
005.mp3
Files aside from MP3 files (Example: 004.txt)
also count as single files.
Folder 158
Folder 159
F158
F159
001.mp3
002.mp3
Folder 255
F255
• Total number of folders possible on a single disc: 255
• Maximum folders this deck can recognize:
*: A root directory is counted as one folder.
255*
Download from Www.Somanuals.com. All Manuals Search And Download.
35
How to operate the MP3 player
File names
Only files with the MP3 file extension ".mp3" can be recognized as MP3 and
played. Be sure to save MP3 files with the ".mp3" file extension. The "MP"
letters of the file extension will be recognized whether entered as
uppercase letters or lowercase letters.
If the ".mp3" file extension is attached to a file other than an MP3
file, that file will be mistakenly recognized by the deck as an MP3
Caution
file and played, resulting in loud noise output that can damage
the speakers. Be sure to avoid attaching the ".mp3" file extension
to files that are not MP3 files.
Multi-sessions
Multi-sessions are supported, and playing of CD-R and CD-RW discs with
annotated MP3 files is possible. However, when "Track at once" has been
written, close the session or process the warning message. Standardize the
format of each session without changing the format.
Playing MP3
When a disc with recorded MP3 files is inserted, the deck first checks all the
files on the disc. No sound is output while the deck is checking the files on
the disc. It is recommended that the disc be recorded without files other
than MP3 files and without unnecessary folders in order to speed up the
checking of disc files by the deck.
MP3 playing time display
It is possible that playing time will not be correct, depending on the writing
condition of the MP3 file.
* It is possible that playing time will not be correct when VBR Fast Up/Down
is operated.
Display order of MP3 file/folder names
Names of MP3 folders and files within the same level are displayed in the
following order.
1. MP3 folders displayed first, by ascending order of numbers, letters.
2. Files displayed next, by ascending order of numbers, letters.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
How to operate the MP3 player
[DISC] button
Button [3]
Listening to MP3 file
Press the [DISC] button.
1
This starts MP3 file play.
Playback may be intermittent when there is a scratch on a CD or
when the recorded side is dirty.
Caution
ꢀ Note ꢀ
When music data recorded in the normal way (CD-DA) is
present on the same disc with MP3 music files, the normally
recorded music data will be played. To listen to the MP3 music
files, press button [3].
Download from Www.Somanuals.com. All Manuals Search And Download.
37
How to operate the MP3 player
Buttons [1] and [2]
[SEEK ] button
[SEL]
button
[FAST
button
]
[RTN] button
Advancing to the next track (file) or returning to
the beginning of the track (file) being played
Turn the [SEL] button to the left or right.
1
Turn to the right: Advances to the next track (file).
Turn to the left: Returns to the beginning of the track (file)
being played.
Repeat turning for previous tracks (files).
Fast Forward /Rewind
Fast forward or rewind the song currently being played.
Press and hold the [SEEK ] or [FAST ] button.
1
[SEEK ] button : Fast forward.
[FAST ] button : Rewind.
Skipping to the next or previous folder
Press button [1] or [2].
1
Button [1]: Selects the next folder.
Button [2]: Selects the next lower folder.
Return to the root directory of the CD
In the root directory, when a file cannot replay, the system will
return to the first file that can perform a replay. (In the
configuration example, the file is returning to 001.mp3. See
page 35.)
Press the [RTN] button.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
38
How to operate the MP3 player
Buttons [4] and [5]
Playing the beginning of files (SCAN)
Press button [4].
1
Press the button briefly to play just the first 10 seconds of each
song for all the files in the current folder being played.
Pressing the button until [ALL SCAN] is displayed will play just
the first 10 seconds of the first song in each folder.
•To continue playing a desired track, press the button again to
ATTENTION
stop scanning.
•After the entire disc is scanned once, ordinary playback starts
from the point where scanning started.
Repeating the same file (REPEAT)
Press button [5].
1
Press the button briefly to repeat the file being played.
Pressing the button until [ALL REPEAT] is displayed will repeat
all the files in the current folder being played.
To cancel, press button [5] again.
Download from Www.Somanuals.com. All Manuals Search And Download.
39
How to operate the MP3 player
[DISP] button
Buttons [5] and [6]
Playing files in random order (RANDOM)
Press button [6].
1
Press the button briefly to randomly play the files in the current
folder being played.
Pressing the button until [ALL RANDOM] is displayed will
randomly play the files in all the folders.
To cancel, press button [6] again.
•Doing random playback, press button [5] to repeat the file
being played. To cancel repeat play (go back to random play),
ATTENTION
press button [5] again.
During playback of a particular file: The file being played is
played repeatedly.
While searching: The following file is played repeatedly.
•Occasionally the same file happens to be played (selected) two
or more times in a row; this is normal operation and is no sign of
a problem.
Displaying title
Press the [DISP] button.
1
Each time the button is pressed the following will be displayed
in order.
Elapsed Time ➔ Folder Name/File Name*1 ➔ Tag*2 ➔ Clock
*1: The display area shows a maximum of 10 characters and
then scrolls to display the remaining characters.
After the folder name is displayed, the file name will be
displayed by scrolling. After the file name is scrolled, the
display will be fixed.
*2: If there is no tag data, "NO TAG" will appear.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
How to operate the tuner
How to operate the tuner
[SEEK ] button
[SEL]
button
[FM AM] button
[FAST ] button
First, press the [FM AM] button to start tuner operation.
There are automatic and manual methods for setting stations in
memory. The receiver will accept up to 24 stations in memory: six in
AM and 18 in FM (6 each for FM1, FM2 and FM3.) (Initial setting)
Tuning to a station
Press the [FM AM] button to switch to the desired FM or
AM bands.
1
Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in
order each time the button is pressed.
Turn the [SEL] button to the left or right to tune to a
station.
2
Turn to the right: Tunes to higher frequencies.
Turn to the left: Tunes to lower frequencies.
Press the [SEEK /FAST ] button to start the automatic
station search.
3
[SEEK ] button: Starts searching toward higher frequencies.
[FAST ] button: Starts searching toward lower frequencies.
At times, it may be difficult to maintain optimum reception
because the antenna affixed to your vehicle is in motion
ATTENTION
constantly (relative to the broadcast antenna), encountering
continuous variation in the received radio signals’ strength. Other
factors affecting reception include interference from natural
obstacles, sign posts, etc.
Download from Www.Somanuals.com. All Manuals Search And Download.
41
How to operate the tuner
Buttons [1] to [6]
[SEL]
button
[FM AM] button
Entering stations into memory automatically
(The automatic preset mode: ASM)
Press the [FM AM] button to switch to the desired FM or
AM bands.
1
Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in
order each time the button is pressed.
Press the [SEL] button for more than two seconds until a
beep is heard.
2
The automatic preset mode starts.
The [ASM ON] indicator on the screen flashes, and stations are
automatically entered in memory under buttons [1] to [6].
These buttons are called preset buttons.
•Press any numbered button to select the station whose
frequency is indicated right above the button.
ATTENTION
•When a new station is set in memory, the station previously set
in memory will be deleted.
•If there are fewer than six receivable stations, the stations set in
the remaining buttons will be retained.
Download from Www.Somanuals.com. All Manuals Search And Download.
42
How to operate the tuner
Buttons [1] to [6]
[SEL]
button
[FM AM] button
Manually setting stations into memory
This section covers the setting of stations in memory under the
numbered buttons.
Press the [FM AM] button to switch between FM and AM.
1
Turn the [SEL] button to the right or left to tune to the
station to be entered in memory.
2
Select any button, from [1] to [6], and press it for more
than two seconds.
3
The tuned station is now memorized and set in the button
selected. Repeat the procedure to set additional manually
tuned stations in memory, in turn, for buttons [1] to [6]. These
buttons are called the preset buttons.
If the vehicle’s battery is disconnected (for repairs to the vehicle
or for removing the receiver), all stations in memory will be lost.
Caution
In such a case, set stations in memory again.
Download from Www.Somanuals.com. All Manuals Search And Download.
43
How to operate the tuner
Buttons [1] to [6]
[SEL]
button
[FM AM] button
Preset station scan
This function enables reception of all the stations in the preset
buttons for five seconds each.
Press the [SEL] button for less than one second.
1
[P SCAN] will appear at the top of the display, and stations
stored under preset buttons [1] through [6] will be played for
five seconds each.
To stop the preset scan mode at a desired station, press
the [SEL] button again.
2
The receiver will stay tuned to the desired station.
Switching the display
Press the [DISP] button.
1
Each press of the button switches the display the clock and
current frequency.
Download from Www.Somanuals.com. All Manuals Search And Download.
44
How to operate the tuner
Button [1]
[FM AM] button
Button [3]
Changing the reception sensitivity for automatic scanning
The deck lets you select the reception sensitivity to be used for
automatic scanning of stations. The two sensitivity modes available
for this deck are AUTO mode and DX mode.
During automatic scanning, the reception sensitivity
switches automatically to one of two levels. Initially the
reception sensitivity is set to the low level so that only
stations with strong signals are received. If no stations
could be received, the reception sensitivity is increased
so that stations with weaker signals can also be
received.
AUTO Mode
DX Mode
Because the reception sensitivity for automatic scanning
is set to the high level from the start, even stations with
weaker signals can be received. (Signal crossover may
result in some stations being hard to hear.)
Check that the deck is in standby mode.
1
2
Press and hold the button [1], then [FM AM] button, and
hold both for more than three seconds.
The mode switches between AUTO mode and DX mode each
time the buttons are pressed.
Changing the radio band location
You can switch the location for the radio bands used between the
North American region and the Asia/Australia region. The default
setting is USA (North America).
Check that the deck is in standby mode.
1
2
Press and hold the button [3], then [FM AM] button, and
hold both for more than three seconds.
The radio band switches between USA and OTHERS each time
the buttons are pressed.
After changing the location, the power will turn on in FM1
mode. After this, the broadcast stations will be searched for
automatically and stored in buttons [1] to [6].
Download from Www.Somanuals.com. All Manuals Search And Download.
45
How to operate the tuner
FM reception characteristics
In general, FM has much better tonal quality than AM. However, FM
and FM stereo reception encounter several characteristic problems
not encountered with AM. FM is more difficult to receive than AM in a
moving vehicle. The following are explanatory notes on what to
expect from FM reception and on how to get satisfactory
performance.
FM reception differs from AM
A characteristic of transmitted signals is that lower frequencies
travel further. FM frequencies are much higher than AM’s
(similar to a ray of light): they won’t bend but they will reflect.
Often, they will be interrupted by tall buildings, mountains, etc.,
taking direct and indirect paths to your vehicle’s antenna. The
distance at which FM stations can be received satisfactorily is
usually not nearly as far as that which AM stations can be
received.
AM Radio Waves
Ionosphere
FM Radio Waves
Ionosphere
Fading out
In weak signal or “fringe” reception areas, FM stations may
fade out completely, or fade in and out. When driving in weak
signal areas, such as near hills, through valleys or tunnels,
among tall buildings, etc., you may encounter unusual noise
interference. THIS IS NOT A TUNER PROBLEM. In this case,
you can only wait until you are in a better reception area, tune
to a stronger station, or reduce the treble level.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
How to operate the tuner
Reception area of FM broadcasts
A home receiver can catch weak FM stereo signals through the
use of a tall, directional or ultra-sensitive antenna. In a moving
vehicle, the area for good reception is limited because of
varying conditions encountered while driving, including the
types and heights of broadcast antenna structures, signal
strength, engine noise, etc. For best reception with manual
antenna, extend the antenna mast as far as possible.
Transmitting Antenna 100 Meters High
Effective Radiation Power 1kW
FM Stereo Auto Radio 12.4 miles
FM Monaural Auto Radio 31 miles
Home FM Stereo Receiver 62 miles
Reception quality varies depending on the power of the FM
station, natural and artificial barriers,weather conditions, etc.
Multipath
The reflection characteristics of FM waves cause another
problem called multipath–FM wave signals reflecting off of
buildings, mountains, etc. When the antenna receives direct
and reflected waves at the same time, distortion of sound in the
treble range often occurs, such as static or harsh-sounding
voices. THIS IS NOT A TUNER PROBLEM. Only moving to
another area with a clearer signal path can remedy the
situation.
DIRECT
WAVE
Download from Www.Somanuals.com. All Manuals Search And Download.
47
How to use a Card remote control
How to use a Card remote control
Precautions in use of the remote control
• Be careful when handling the control, especially because it is
small and light. Dropping or striking it hard may damage it,
wear out the battery or cause a malfunction.
• Keep the remote control free of moisture, dust and water. Do
not subject it to shock.
• Do not place the remote control unit where it will get hot, such
as on the dashboard or near a heater vent. Allowing the
remote control unit to overheat may warp its case or cause
other problems.
• Do not operate the remote control unit while driving because
doing so could cause an accident.
• When using the remote control, point it directly at the remote
control light receptor.
• The light receptor may not operate correctly if it is exposed to
bright light such as direct sunlight.
• Be sure to press the [PWR] button on the main unit for more
than two seconds to shut it down before leaving the car, or the
car battery may be run down. When the main unit is shut down,
the remote control will not work.
• Remove the batteries from the remote control unit whenever it
is not to be used for a long time.
Cleaning the remote control
• Use a dry cloth to keep the unit clean. If the remote control unit
gets extremely dirty, clean it with a cloth moistened in dilute
liquid detergent. Do not use alcohol or thinner; these
compounds may damage the finish.
• In no event should benzine or thinner be used. These
substances will damage the case or finish.
Download from Www.Somanuals.com. All Manuals Search And Download.
48
How to use a Card remote control
[PWR]
button
Remote-control
light receptor
[+] button
] button
[MUTE]
button
[
-
Turning the power on/off
When the power is turned on, the state used when the power was
turned off such as CD and tuner playing is restored.
Press the [PWR] button.
1
The power turns on or off each time the button is pressed.
When the main unit is shut down, the remote control will not work.
ATTENTION
Adjusting the audio volume
Press the [+] or [-] button.
1
[+] button: Increases the volume.
] button: Decreases the volume.
[
-
Cutting the volume instantly (muting)
Press the [MUTE] button to cut the volume or restore it
instantly.
Download from Www.Somanuals.com. All Manuals Search And Download.
49
How to use a Card remote control
[MODE] button
[BAND] button
Switching playback modes
Press the [MODE] button.
1
Press the button to switch modes in the following sequence:
Tuner
Disc
How to play the tuner
Select the tuner mode first.
Selecting the FM/AM band
Press the [BAND] button.
1
Each press will switch tuner modes from FM1 ➔ FM2 ➔
FM3 ➔ AM.
Download from Www.Somanuals.com. All Manuals Search And Download.
50
How to use a Card remote control
[BAND] button
[
[
TUNE SEEK ] buttons
•
PRESET CH ] buttons
Selecting a station (manually or automatically)
A short tap of the button will allow manual station tuning.
Pressing for more than one second will start automatic tuning.
Press the [ TUNE•SEEK ] button.
1
[
[
] button: Tunes to higher frequency stations.
] button: Tunes to lower frequency stations.
Selecting preset stations
A total of six stations may be selected (preset tuning) out of
those already set in memory through the main unit. (Refer to
“Manually setting stations into memory,” page 43.)
Press the [ PRESET CH ] button.
1
[
[
] button: Select the next higher number preset button.
] button: Select the next lower number preset button.
How to play CDs
Select the disc mode first.
Switching disc mode
Press the [BAND] button.
1
When one or two CD changers are connected, press the
[BAND] button to change modes from CD player ➔ CD
changer 1 ➔ CD changer 2.
The indicator will skip a changer or player that has no discs
loaded.
Download from Www.Somanuals.com. All Manuals Search And Download.
51
How to use a Card remote control
[
TRACK APS ] buttons
•
[
DISC ] buttons
Advancing to the next track or returning to
the beginning of the track being played
Press the [ TRACK•APS ] button.
1
[
[
] button: Skips to the next track.
] button: Returns to the beginning of the track being
played. (Press repeatedly to move to previous
tracks.)
Hold the [ ] button down to fast forward, or the [ ] button to
rewind through the track being played.
ATTENTION
Skipping to the next or previous disc
Press the [ DISC ] button.
1
[
[
] button: Selects the next higher number disc.
] button: Selects the next lower number disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
52
How to use a Card remote control
Replacing the battery
To prevent accidents, store batteries out of the reach of
children. If a child has swallowed one, consult a doctor
immediately.
Warning
Use one CR2025 battery.
On the back of the remote control, while pressing the
locking knob on the battery slot cover toward your right,
pull out the battery carrier with your fingernail.
1
Unlock
Remove the old battery, then place the new one in the
carrier with the (+) mark facing up.
2
Push in the carrier until it snaps into place.
3
Be extremely careful not to swallow the battery.
Caution
Download from Www.Somanuals.com. All Manuals Search And Download.
53
How to use an optional NOB remote control
How to use an optional NOB remote control
[AUDIO
CONTROL]
button
Remote-control
light receptor
BAND
MODE
TRACK
TUNE SEEK
DISC
[MUTE]
button
[PWR] button
E-COM
MUTE
PWR
ILLUMI
Turning the power on/off
When the power is turned on, the state used when the power was
turned off such as CD and tuner playing is restored.
Press the [PWR] button.
1
The power turns on or off each time the button is pressed.
When the main unit is shut down, the remote control will not work.
ATTENTION
Adjusting the audio volume
Press the [AUDIO CONTROL] button, and turn it to the
left or right.
1
Each press of the button will switch the audio control modes.
Turn to the right: Increases the volume.
Turn to the left: Decreases the volume.
Cutting the volume instantly (muting)
Press the [MUTE] button to cut the volume or restore it
instantly.
Download from Www.Somanuals.com. All Manuals Search And Download.
54
How to use an optional NOB remote control
BAND
MODE
[BAND] button
[MODE] button
TRACK
TUNE SEEK
DISC
E-COM
MUTE
PWR
ILLUMI
Switching playback modes
Press the [MODE] button.
1
Press the button to switch modes in the following sequence:
Tuner
Disc
How to play the tuner
Select the tuner mode first.
Selecting the FM/AM band
Press the [BAND] button.
1
Each press will switch tuner modes from FM1 ➔ FM2 ➔
FM3 ➔ AM.
Download from Www.Somanuals.com. All Manuals Search And Download.
55
How to use an optional NOB remote control
BAND
MODE
[BAND] button
TUNE SEEK ] buttons
TRACK
TUNE SEEK
DISC
[
•
[
DISC ] buttons
E-COM
MUTE
PWR
ILLUMI
Selecting a station (manually or automatically)
A short tap of the button will allow manual station tuning.
Pressing for more than one second will start automatic tuning.
Press the [ TUNE•SEEK ] button.
1
[
[
] button: Tunes to higher frequency stations.
] button: Tunes to lower frequency stations.
Selecting preset stations
A total of six stations may be selected (preset tuning) out of
those already set in memory through the main unit. (Refer to
“Manually setting stations into memory,” page 43.)
Press the [ DISC ] button.
1
[
[
] button: Selects the next higher number preset button.
] button: Selects the next lower number preset button.
How to play CDs
Select the disc mode first.
Switching disc mode
Press the [BAND] button.
1
When one or two CD changers are connected, press the
[BAND] button to change modes from CD player ➔ CD
changer 1 ➔ CD changer 2.
The indicator will skip a changer or player that has no discs
loaded.
Download from Www.Somanuals.com. All Manuals Search And Download.
56
How to use an optional NOB remote control
BAND
MODE
TRACK
TUNE SEEK
DISC
[
TRACK ] buttons
[
DISC ] buttons
E-COM
MUTE
PWR
ILLUMI
Advancing to the next track or returning to the
beginning of the track being played
Press the [ TRACK ] button.
1
[
[
] button: Skips to the next track.
] button: Returns to the beginning of the track being
played. (Press repeatedly to move to previous
tracks.)
Hold the [ ] button down to fast forward, or the [ ] button to
rewind through the track being played.
ATTENTION
Skipping to the next or previous disc
Press the[ DISC ] button.
1
[
[
] button: Selects the next higher number disc.
] button: Selects the next lower number disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
57
How to use an optional NOB remote control
Replacing the battery
To prevent accidents, store batteries out of the reach of children.
If a child has swallowed one, consult a doctor immediately.
Warning
Use two AA-size batteries.
Remove the back cover of the remote control unit by
gently pressing and sliding it in the direction indicated by
the arrow.
1
Install the two batteries provided into the compartment
as illustrated inside the compartment.
2
Return the back cover into place by sliding it in the
direction indicated by the arrow.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
58
How to use an optional NOB remote control
•Be extremely careful not to swallow the battery.
•The battery life is approximately one year. If the remote control
unit does not operate correctly or if the button lamp gets dim,
replace the batteries.
Caution
•Be sure to orient the batteries correctly so that the positive and
negative poles match the diagram.
•Do not use one new battery and one old one; use two new
batteries.
•Use only two of the same kind of battery.
•If any liquid is seen leaking from the batteries, remove both
batteries and dispose of them properly. Thoroughly clean the
battery compartment with a dry cloth. Then install new
batteries.
Download from Www.Somanuals.com. All Manuals Search And Download.
59
How to operate the receiver with an optional CD changer connected
How to operate the receiver with an
optional CD changer connected
[DISC] button
[SEEK ] button
[SEL]
button
[FAST ] button
Listening to a CD
This section covers the operation of an optional CD changer that is
connected to the receiver.
To switch from another mode, press the [DISC] button.
Press the [DISC] button.
1
Each press of the button switches the mode from CD Player ➔
CD Changer 1 ➔ CD Changer 2.
Advancing to the next track or returning to
the beginning of the track being played
Turn the [SEL] button to the left or right.
1
Turn to the right: Advances to the next track.
Turn to the left: Returns to the beginning of the track being
played. (Repeat turning for previous tracks.)
Fast Forward/Rewind
Fast forward or rewind the song currently being played.
Press and hold the [SEEK ] or [FAST ] button.
1
[SEEK ] button: Fast forward.
[FAST ] button: Rewind.
Download from Www.Somanuals.com. All Manuals Search And Download.
60
How to operate the receiver with an optional CD changer connected
Buttons [4] and [5]
Playing the beginning of tracks (SCAN)
Press button [4].
1
Tapping the button causes the changer to move up to the next
track and play it for 10 seconds, then move up to the next
track and play it for 10 seconds, and so on, on one CD, until
the button is tapped again.
Hold the button until the [ALL SCAN] display appears to play
the first 10 seconds of the first track of every CD loaded.
•To continue playing a desired track, press the button again to
stop scanning.
ATTENTION
•After the entire disc is scanned once, ordinary playback starts
from the point where scanning started.
Repeating the same track (REPEAT)
Press button [5].
1
Tapping on the button causes the changer to repeat the track
currently being played, until the button is tapped again.
Hold the button until the [ALL RPT] display appears to repeat
all tracks on the CD being played.
Download from Www.Somanuals.com. All Manuals Search And Download.
61
How to operate the receiver with an optional CD changer connected
Buttons [1] and [2]
Buttons [5] and [6]
Playing tracks in random order (RANDOM)
Press button [6].
1
Tapping on the button causes the changer to play the tracks
on the currently playing CD in random order, until the button is
pressed again.
Hold the button until the [ALL RAND] display appears to play
tracks from all of CDs loaded in the currently selected
changer, in random order.
•Doing random playback, press button [5] to repeat the track
being played. To cancel repeat play (go back to random play),
ATTENTION
press button [5] again.
During playback of a particular track: The track being played is
played repeatedly.
While searching: The following track is played repeatedly.
•Occasionally the same track happens to be played (selected)
two or more times in a row, but it is no sign of a problem.
•When any of the functions - “Playing the beginning of tracks,”
“Repeating the same track” and “Playing tracks in random
order” - is selected, a message such as [SCAN], [ALL SCAN],
[REPEAT], [ALL RPT], [RANDOM] or [ALL RAND] appears on
the display to verify the current function.
•Random play is not canceled even if a magazine is ejected.
Skipping to the next or previous CD
Press button [1] or [2].
1
Button [1]: Selects the next higher number disc.
Button [2]: Selects the next lower number disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
62
How to operate the receiver with an optional CD changer connected
Buttons [1] to [6]
[DISP] button
[SEL]
button
Specifying a CD to play
A CD of your choice is directly selectable out of the loaded discs.
Press the [SEL] button.
1
Press a button from [1] to [6].
2
Buttons
CD
1
1
7
2
2
8
3
3
9
4
4
5
5
6
6
10 11 12
To select a CD from nos. 7 to 12, press the desired button
considerably longer.
Switching the display
Press the [DISP] button.
1
Each press of button switches the display track No./elapsed
time and clock.
Download from Www.Somanuals.com. All Manuals Search And Download.
63
If you have a question:
If you have a question:
[RESET] button
First check the items mentioned below before attempting to
troubleshoot problems.
If a problem occurs, for instance when the unit does not respond
to any button presses, or the display doesn't work correctly,
Caution
press the [RESET] button using a sharp tool.
Pressing the [RESET] button will delete all the entries from
memory. The settings will return to those made at the factory
prior to shipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
64
If you have a question:
Displayed information (for troubleshooting)
The information listed in the chart below is displayed to show the
status of the CD player and CD changer. Refer to the chart for the
appropriate action.
Information Code Table
When "INFO " flashes on the indicator
Nos.2~7 are displayed.
Information Contents
Explanation and remedial action to take
2
3
5
NO DISC LOADED IN
THE MAGAZINE
There is no disc in the magazine or player. Load
a disc in the magazine. (Load a music disc.)
DISCS ARE DIRTY OR
DAMAGED
The loaded disc is dirty or upside down. Check
it for proper orientation and verify it is clean.
CD PLAYER AND CD
CHANGER FAILS
MECHANICALLY
•The CD player and CD changer is inoperative for
some reason. Go through the magazine removal
procedure.
•If a magazine fails to eject, have your dealer fix
the problem.
6
7
WHEN THE CD CHANGER
INTERNAL TEMPERATURE IS operation. Wait till it cools down.
HIGH (TO PROTECT PICKUP •Resume playing after the “High temperature sensed
UNIT)
•The temperature in the CD changer is too high for
and CD stopped" display disappears. If the CD still
cannot play, have your dealer repair it.
AN INTERNAL POWER
SUPPLY FAILURE IS
•Turn the ACC off once before turning it on once
again to resume the operation.
OCCURRING WITH THE •If the function still cannot be restricted, contact your
AUTO CHANGER
dealer.
Information Contents
LOAD
Explanation and remedial action to take
CD changer is in the process of verifying the
presence of CDs after a magazine has been inserted
into the CD changer.
Download from Www.Somanuals.com. All Manuals Search And Download.
65
If you have a question:
Remedial action
to take
Refer
Mode
Problem
Causes
to page
Is the volume control up sufficiently?
Turn up the volume control.
24
Readjust the fader and
balance controls to more
normal positions.
Is the fader or balance control set
far to one side?
25
Dead or
weak sound
Other probable causes include
broken audio-signal wiring or a
faulty speaker.
Have your dealer check
the problem.
Are too many electrical items
installed, causing a lack of power?
Have your dealer check
the problem.
Power does
not turn on.
Other probable causes include a
run-down car battery, broken power
or interconnection wiring.
Have your dealer check
the problem.
Has the car battery been disconnected
for repair or checked out?
Reenter them into
memory.
42,
43
Common Frequencies Are too many electrical items
Have your dealer check
the problem.
to all
or titles set in installed and causing lack of
memory are available power?
deleted.
Other probable causes include
run-down car battery, broken power
or interconnection wiring.
Have your dealer check
the problem.
No guide
Is the guide tone disabled?
tone sounds.
Enable the guide tone.
Replace battery.
28
53,
58
Is the battery low?
Is the battery installed in reverse
polarity?
Reinstall the battery in the
correct polarity.
53,
58
The remote
control does
not work.
Is direct sunlight hitting the remote
control light receptor?
Use the remote control
close to the receptor.
Other probable causes include a
malfunctioning remote control.
Have your dealer check
the problem.
Download from Www.Somanuals.com. All Manuals Search And Download.
66
If you have a question:
Remedial action
Refer
Mode
Problem
Causes
to take
to page
Is an extra label or seal
applied to the disc?
Do not apply labels or seals
to the disc.
The disc cannot be inserted.
The disc is ejected as soon
as it is inserted.
12
Are there rough edges,
deformations or
damaged areas on the
disc?
Try inserting another disc.
Removed any burrs.
Do not use a deformed or
damaged disc.
Or, the disc cannot be
ejected.
The disc cannot be
changed.
13
Is the disc damaged?
(scratched, warped, etc.) play a damaged disc.
Try another disc. Do not
12
14
CD
Is the disc clean?
Clean the disc.
Sound skips around.
Sound is intermittent.
Sound is bad in quality.
Is the player mounted at
a proper angle?
Is the player mounted
loosely?
Have your dealer check it
out.
Are you driving over a
rough surface?
Avoid playback while
driving over rough surfaces.
11
Press the [DISC] button a
bit longer (forced Eject).
The disc cannot be
ejected.
If unknown
Remedial action
to take
Refer
Mode Problem
Causes
to page
Is the antenna retracted?
Extend the antenna.
Is the tuner correctly tuned to a
station?
Tune to a station.
41
41
Tune to a local station.
(Please note, there may
be no local stations
servicing the area where
you are currently driving.)
Receives
no
Are you driving outside the service
area of your preset stations?
stations,
or
Tuner
receives
static
noise.
Are you operating other equipment
with a computer, or a mobile phone,
in your vehicle at the same time as
your receiver?
Avoid operating such
equipment while using
the receiver.
Other problems may include a loose Have your authorized
or disconnected antenna cable, a
bad antenna cable or a bad
Eclipse retailer check the
problem.
Download from Www.Somanuals.com. All Manuals Search And Download.
67
Specifications
Specifications
<GENERAL>
Power Supply
Current Drain
14.4V DC (11-16V)
3A MAX
Dimensions (W x H x D)
In-Dash Unit
Mass (weight)
7" x 2" x 6-1/5" (178 x 50 x 158mm)
Approx. 1.4kg
Usage temperature range
Storage temperature range
-20°C to + 65°C (-4°F to 149°F )
-40°C to + 85°C (-20°F to 185°F )
<FM TUNER>
Frequency Range
USA:
Asia/Australia:
Usable Sensitivity
Frequency Response
Stereo Separation
87.75~107.9MHz (0.2MHz step)
87.5~108MHz (0.05MHz step)
13dBf
30~15,000Hz,
38dB
3dB
<AM TUNER>
Frequency Range
USA:
Asia/Australia:
Usable Sensitivity
530~1,710kHz (10kHz step)
522~1,629kHz (9kHz step)
20µV
<CD SECTION>
Frequency Response
Wow & Flutter
20~20,000Hz,
Below measurable limits
3dB
Stereo Separation
S/N Ratio (A-weighted)
Dynamic Range
76dB
90dB
89dB
0.02%
Total Harmonic Distortion
<AUDIO AMPLIFIER>
Power Output
13W x 4 (20~20,000Hz, 0.8% THD,
4Ω) Max 40W x 4
Output Level/Impedance
Tone Action
2.7V (0dB) /330Ω line-out
impedance
Bass
:
10dB at 100Hz
10dB at 10kHz
Treble :
Loudness
+9.5dB at 100Hz/+6.0dB at 10kHz
Download from Www.Somanuals.com. All Manuals Search And Download.
68
Before installation
Before installation
ꢀ Note ꢀ
Be sure to disconnect the vehicle battery's negative terminal
before installing the receiver.
Components
No.
Item
Q'ty
1
2
3
4
5
6
7
8
9
10
11
12
13
Main unit
Mounting sleeve
Side bracket
Rear bracket
Bezel
Bushing
Self-tapping screw (6 x 16 mm)
Stud bolt
Flat head screw (5 x 8 mm)
Hex-head bolt (5 x 20 mm)
Hex nut (5 mm)
Interconnecting cable
Remote control
1
1
2
1
1
1
2
1
4
2
2
1
1
Installation angle
In order to maintain proper functioning, install the unit within an angle
of 30 degrees from horizontal (standard). If this is not done, sound
skipping or ejection of the CD may occur.
FRONT
WITHIN AN ANGLE
OF 30 DEGREES
STANDARD
Download from Www.Somanuals.com. All Manuals Search And Download.
69
Mounting instruction
Mounting instruction
Mounting the main unit
Insert the mounting sleeve into the opening in the vehicle
dash board or console box.
1
Use a screwdriver or the like to bend the tabs in the
mounting sleeve to secure the mounting sleeve.
2
BEND THE MOUNTING
TABS.
DASH BOARD
OR CONSOLE BOX
2 MOUNTING
SLEEVE
Attach the side brackets to the main unit using flathead
screws.
3
1 MAIN UNIT
9 FLAT HEAD
SCREWS [ x 2 ]
(5 x 8mm)
3
SIDE BRACKETS [ x 2 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
70
Mounting instruction
Mount the stud bolt to the main unit.
4
5
Insert the main unit into the mounting sleeve until it locks
in place.
Fasten the rear of the main unit using either method [A]
or [B].
6
Select method [A] or [B] to suit the interior configuration of the
vehicle.
Install the bezel on the main unit.
7
[A]
METAL OF
VEHICLE
DASH BOARD
OR CONSOLE BOX
6
BUSHING
8
STUD BOLT
2
MOUNTING SLEEVE
5
BEZEL
[B]
7 SELF TAPPING
11
NUT (5mm)
SCREW (6 x 16mm)
DASH BOARD
OR CONSOLE BOX
METAL OF
VEHICLE
10
BOLT
(5 x 20mm)
11
NUT (5mm)
4
REAR BRACKET
8
STUD BOLT
2
MOUNTING SLEEVE
5
BEZEL
Download from Www.Somanuals.com. All Manuals Search And Download.
71
Mounting instruction
Names of lead wires and destinations (refer to Page 74)
ꢀ Caution ꢀ
Never connect the power supply to the speaker leads,
otherwise it cause damage to the main unit.
ꢀ Note ꢀ
To prevent unconnected leads from shorting out, insulate them
by wrapping their tips with electrical tape. Similarly, insulate the
ends of connected leads.
If an external amplifier is to be connected to the receiver, be
sure to ground its outside housing to the vehicle body (a metal
part).
No.
1
Name
ACC
Wire color
Red
Destination
Connect where the power comes on
when the ignition is in the ACC
position.
2
B+
Yellow
Black
Connect where the power is
constantly available, regardless of the
ignition switch's position.
3
4
5
6
Ground
Connect where good body
grounding is available.
Antenna power supply Blue
Connect to the automatic-antenna
control terminal of the vehicle.
Illumination power supply Orange/White
Control power supply Blue/White
Connect to where power comes on
when the headlights are turned on.
Connect to the control terminal for
the external amplifier, or to the RCA
output connectors of a DSP or EQ.
7
E-LAN terminal
Connect to the E-LAN terminal of the
CD changer, DSP, etc.
8 & 9 Line-out terminals
Connect to the RCA input connectors
of an external amplifier.
10
Line-out terminals (Nonfader)
Connect to the RCA input connectors of
a DSP or EQ, or the RCA connectors of
a woofer amplifier.
11
12
Speaker leads
Connect them to their respective
speaker leads.
Cellular phone mute
Pink
Connect to the ground output
terminal on a mobile phone.
Download from Www.Somanuals.com. All Manuals Search And Download.
72
Mounting instruction
System
CD3424
CD3424
CH3083
CD3424
CH3083
CH3083
Download from Www.Somanuals.com. All Manuals Search And Download.
73
Mounting instruction
Download from Www.Somanuals.com. All Manuals Search And Download.
74
Mounting instruction
Download from Www.Somanuals.com. All Manuals Search And Download.
75
Mounting instruction
Download from Www.Somanuals.com. All Manuals Search And Download.
76
M e m o
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Download from Www.Somanuals.com. All Manuals Search And Download.
77
How to contact customer service
How to contact customer service
Should the product require service, please contact your nearest
following Eclipse dealer.
<U.S.A/CANADA>
DIVISION OF FUJITSU TEN CORP. OF AMERICA
19600 SOUTH VERMONT AVENUE, TORRANCE, CA 90502
Phone: (310) 327-2151
<AUSTRALIA>
FUJITSU TEN (AUSTRALIA) PTY LTD.
ECLIPSE AUSTRALIA
Phone: 1800-211-411
<MALAYSIA>
CSE Cobra. Sdn. bhd.
Level 5, Axis Plaza, Jalan U1/44, Glenmarie, 40150 Shah Alam,
Selangor D.E., Malaysia.
Phone: 03-5569-4200
Fax: 03-5569-4201
<SINGAPORE>
CSE Cobra (S) Pte Ltd
Trademart
60, Martin Road, # 05-20, Singapore 239065
Phone: 6737 2568
Fax : 6737 9538
Download from Www.Somanuals.com. All Manuals Search And Download.
78
How to contact customer service
<KOREA>
HYUNDAI AUTONET Co., LTD.
1st FL. Namhyoung Bldg, 746-23 Yeoksam-Dong, Kangnam-Ku,
Seoul, Korea 135-080
Phone: 02-508-6001
Fax: 02-2-508-6067
Transpectra Co., Ltd.
115-16 nonhyun dong kangnam ku Seoul, Korea.
Phone: 02-540-4595
Fax: 02-2-540-4666
<TAIWAN>
Sentrek Taiwan, LTD.
1, 9F, Lane 155, Section 3, Peishen RD., Shenkeng, Taipei Hsien,
222
Taiwan, R.O.C.
Phone: 02-2662-8110
Fax: 02-2662-8117
<THAILAND>
Sho-Ten Co., Ltd.
114/9 Soi Suwansawadi, Thungmahamek, Rama 4 Rd., Sathorn,
Bangkok 10120, Thailand.
Phone: 02-671-9610-12
Fax: 02-671-9614
Download from Www.Somanuals.com. All Manuals Search And Download.
79
M e m o
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Download from Www.Somanuals.com. All Manuals Search And Download.
80
IMPORTANT
RECORD YOUR “KEY CD”
HERE…
STORE YOUR “KEY CD”
ALONG WITH YOUR
OWNER’S MANUAL IN
YOUR SOCK DRAWER.
Download from Www.Somanuals.com. All Manuals Search And Download.
81
CUSTOMER NOTICE
Please retain this booklet and write in the serial number of your CD3424 for
identification. The serial number is labeled or stamped on the chassis.
Serial No.
FUJITSU TEN LIMITED
090001-1454A700
0405 (Y.TS)
Download from Www.Somanuals.com. All Manuals Search And Download.
|