Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty Terms and Conditions .....................................................................................................................31
8. COMPLIANCE INFORMATION ........................................................................................................................................33
FCC Notice..........................................................................................................................................................33
9. LEGAL INFORMATION......................................................................................................................................................34
Trademark Information....................................................................................................................................34
Software License Agreement...........................................................................................................................34
Rights..................................................................................................................................................................34
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1. PRODUCT OVERVIEW
1.1What’s Included
The following items are included with InterView:
InterView Monitor:
Dual – 17 Inch – LCD Panels
InterView Multiplatform Control Base
AC Power Adapter
Power Cord
DMS to DUAL DVI-I Signal Cable
DVI-I to VGA Adapter
Microphone Audio Cable
USB Cable
Visual Guide
Drivers and Software CD
4
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2Safety Instructions
Safe Environment
Do not store or use the InterView in locations that are exposed to heat, extreme cold, high
humidity or dusty environment. Room temperature conditions are recommended.
Do not subject InterView to severe vibrations or high impact conditions.
Do not allow water or other liquids to spill on or into InterView.
InterView may become unstable if not placed on a solid and horizontal surface.
Safe Use
To avoid electric shock, never touch the components inside of InterView. Only a qualified
technician should open the monitor case.
Do not try to insert anything metallic or push objects into any openings.
Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air as these will
cause damage to the LCD screens. If possible, use a special screen-cleaning tissue or
solution suitable for the anti-static coating.
Handle your monitor with care as darker-colored plastics may scratch and show scuff
marks.
Keep hands off the gap between the stand and the panel as injury may take place while
rotating or folding the LCD portion of InterView.
Unplug the monitor when it is going to be left unused for an extended period of time or
before any type of service is performed.
Consider keeping the packaging for use in the future when you may need to transport the
monitor. The fitted foam packing is ideal for protecting the monitor during transport.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Base Front View
1. Power Button
2. Power Light Indicator (Left Panel)
3. Power Light Indicator (Right Panel)
4. Panel Selection Button
5. Brightness Adjust (Down)
6. Brightness Adjust (Up)
7. Auto Adjust
8. Integrated Microphone
2
1
3
7
5
6
4
8
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Base Back View
1. USB to PC Port
2. Microphone Jack
3. DMS Port
4. AC Power Connector
1
3
4
2
8
Download from Www.Somanuals.com. All Manuals Search And Download.
2. INTERVIEW SPECIFICATIONS
2.1 InterView Technical Specifications
General
Model number
LCD
EVGA InterView 1700
Screen type
17’’Wide TFT
Preset display area
Horizontal
367.20 mm
229.50 mm
Vertical
Synchronization
Horizontal
Vertical
31.5 kHz to 81.1 kHz
56 Hz to 76 Hz
Viewing angle
Horizontal
20° / 35° (CR=10)
45° / 45° (CR=10)
0.255 X 0.255 mm
220 typ.
500:1 typ.
8ms typ. (14ms typ. max)
Vertical
Pixel pitch
White luminance
Contrast ratio
Response Time
Resolution
Optimal preset resolution
Highest preset resolution
Physical Characteristics
1440x900*2 @ 60 Hz
1440x900*2 @ 60 Hz
Dimensions
Bezel Closing Dimension
Bezel Opening Dimension
417 x 485 x 390 mm
369 x 188 x 870 mm
Weight
7.5 kg/16.52 lbs
Environmental
Operating
Temperature
Humidity
5° to 35°C
30% to 80% (non-condensing)
Non-operating
Temperature
Humidity
-10° to 60°C
10% to 85% (non-condensing)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2 Preset Timing Modes
The screen will be adjusted automatically when the signal transferred from the computer is
the same as the following Preset Timing Modes. If your display mode is not listed, it is not
supported by this monitor; the screen may go blank while the power LED is on.
Horizontal Frequency Vertical Frequency
Sync Polarity
(Horizontal/Vertical)
Display Mode
Pixel Clock (MHz)
(kHz)
(Hz)
59.940
75
VESA, 640x480
VESA, 640x480
VESA, 800x600
VESA, 800x600
VESA, 800x600
VESA, 1024x768
VESA, 1024x768
VESA, 1152×864
VESA, 1280x1024
VESA, 1280x1024
VESA, 1440x900
VESA, 1440x900
31.469
37.500
37.879
45.072
46.875
48.363
60.023
67.500
63.981
79.976
55.935
70.635
25.175
31.500
40.000
46.875
49.500
65.000
78.750
108.000
108.000
135.000
106.500
136.750
-/-
-/-
+/+
+/+
+/+
-/-
+/+
+/+
+/+
+/+
-/+
60.317
72
75
60.004
75.029
75.000
60.020
75.025
59.887
74.984
-/+
2.3 Power Management Modes
For energy conservation, InterView has built-in power management that saves energy by
switching itself to low-power mode when it has not been used for a certain amount of time.
It automatically returns to normal operation when the users press a key on the keyboard. It
is recommended to turn InterView OFF when it is not needed or when leaving it unattended
for long periods of time.
VESA Modes
Normal operation
Active-off mode
Switch off
Horizontal Sync
Active
Vertical Sync
Active
Video
Active
Blanked
n/a
Power Indicator
Blue
Amber
Off
Inactive
n/a
Inactive
n/a
10
Download from Www.Somanuals.com. All Manuals Search And Download.
3. SETTING UP INTERVIEW
Read the safety instructions before setting up the InterView.
3.1Steps to Assembling InterView
1. Rotate the balance bar out from the bottom of the base:
2. Remove the caps on the stand and the panel:
3. Assemble the stand and the panel:
11
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Push in the button and turn it clockwise to lock up the stand and the panel:
5. Open up the panel:
6. Push the balance bar back into the base:
12
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2Connecting InterView to a PC
Before setting up InterView, you must power down your computer(s).
1. Connect the monitor to a computer(s) using the DMS to Dual DVI-I cord.
Note: You can use either the D-Sub plug or the DVI-D plug if there’s no available
DVI-I port on your PC.
2. Plug the power cord into the power adapter:
3. Connect the monitor to the electrical outlet using the power cord:
13
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Power on InterView and the computer(s):
5. Use the audio cable to connect InterView to the MIC or Line-in input of the computer.
This is required to use the onboard microphone.
6. Connect InterView to the computer(s) with the USB cable to enable the front USB 2.0
HUB located on the monitor base. This is also required to use the onboard webcam.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3Plug and Play Compatibility
You can use InterView with any Plug and Play compatible system. The system configures
itself and optimizes the display’s settings. In most cases, InterView‘s installation is
automatically processed unless the user intervenes.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2Control Buttons
2
3
5
4
1
1. Power Button: Powers the InterView ON or OFF
2. Panel Selection Button: Selects the monitor to be adjusted
3. Brightness Adjust (Down): Decreases brightness levels
4. Brightness Adjust (Up): Increases brightness levels
5. Auto Adjust: Adjusts vertical position, phase, horizontal position, and pixel clock
automatically
4.3Brightness Adjustment
Users can adjust the monitor brightness levels from the Brightness (Up/Down) buttons. The
Brightness levels can be adjusted from level 0 to level 8 and will be displayed on the screen
while adjusting. Press the Panel Selection Button to select the panel to be adjusted.
4.4Auto Adjustment
Users can obtain an optimal display when using the AUTO key function. When the 'AUTO'
button is pressed, InterView will optimize the currently selected panel.
Auto Adjustment is disabled when using a DVI connection or DVI dongle.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
5. SYSTEM REQUIREMENTS AND SOFTWARE INSTALLATION
5.1System Requirements
Operating Systems Supported:
- Windows XP Home Edition
- Windows XP Professional
- Windows XP Professional X64 Edition
- Windows Vista™
- Windows Vista™ 64-bit
Hardware:
- 64MB of System Memory or more
- 50MB Hard Disk space or more
Others:
- Microsoft DirectX 9.0C
5.2Installing the Webcam Software
Some functions provided in InterView Application may not work if the driver is not
installed properly
(Step 1) Before the Installation
- View the Device Manager to check if the InterView webcam has already installed. Select
Start (XP)Run or (Vista)Search Box type devmgmt.msc Click OK. The Device
Manager window will appear. Expand “Imaging Devices” to reveal the device name: USB2.0
UVC PC Camera.
- Insert the InterView CD into the disc drive. The AutoPlay dialogue box will appear.
- Click Run autorun.exe
18
Download from Www.Somanuals.com. All Manuals Search And Download.
(Step 2) Processing Installation
- Click Webcam software installation to start the installation process
- Click Next, select the application you would like to install, then click Next to continue
Note: For users who select to install both webcam driver and application, the installation will
starts from the webcam software then to the webcam driver.
Installing the Webcam Application
- Select the destination folder then click Install to begin the installation
19
Download from Www.Somanuals.com. All Manuals Search And Download.
- Installation in process, the dialogue box will automatically close when the installation
completes.
Installing the Webcam Driver
- Click Install
- Click Install
20
Download from Www.Somanuals.com. All Manuals Search And Download.
- Click Finish then select the option to restart you computer after the installation completes
Note: Depending on each user’s PC system and hardware performance, it may take 10 to 15
seconds before entering to the next step, please be patient.
- Click Finish to exit the wizard, then the computer will automatically restart.
(Step 3) Self Check
To ensure the driver has successfully installed, visit the Device Manager to check if the device
name has changed to InterView USB 2.0 Webcam. You can find the InterView Control Center
under Programs when after the InterView camera application is successfully installed
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Color Setting Page
This panel allows users to adjust the color settings by dragging the track bars.
1
6
7
2
3
4
8
9
5
1. Brightness adjustment
2. Contrast adjustment
3. Hue adjustment
4. Saturation adjustment
5. Sharpness adjustment
6. White balance adjustment
7. Gamma adjustment
8. Color / Gray scale
9. Backlight compensation
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Snapshot Setting Page
The InterView webcam application allows users to capture a single photo as well as continuous
shooting. In this panel, the application allows users to set snapshot functions, such as time
intervals and output formats.
1
2
3
4
5
1. Photo quantity for continuous shooting (1-30)
2. Time intervals for continuous shooting (500ms – 2000ms)
3. Image format. Options are: BMP / JPEG / GIF
4. Destination file for images
5. Shutter
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Record Setting Page
This panel allows adjustments to the recording function of the webcam.
4
1
2
3
5
6
7
1. Select the audio device to be captured
2. Select the audio recording source. Ex: Microphone
3. Select the audio encoder to encode the audio stream
4. Select the video encoder to encode the video stream
5. Set file limits
6. Set time limits
7. Recording file save path
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Misc Setting Page
Within this panel, users can adjust settings that control different aspects of the image.
1
2
3
4
1. Video Flip: Flips the video horizontally/vertically
2. Exposure control
- Low Light: avoid under-exposure in low light environment
- High Light: avoid under-exposure in high light environment.
3. Flicker Reduction: Avoids flicker
4. Picture Quality: Select for better quality or faster speed.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
6. TROUBLESHOOTING
6.1Self-Test Feature Check
Self-Test Feature Check (STFC) allows users to check if the monitor works properly.
1.
2.
3.
4.
Turn off both your computer and the monitor
Unplug the DMS cable from the back of the computer
Turn on the monitor
If the monitor is functioning properly, you will see a box in the illustration below
This box appears during normal operation if the video cable becomes disconnected or
damaged.
5.
Turn off your monitor and reconnect the video cable; then turn on both your computer
and the monitor.
6.
If the power indicator remains orange after using the previous procedure, check your
VGA card, cable, and computer system; your monitor is functioning properly.
6.2FAQs
Before calling for assistance, check the information in this section to see if you can
remedy any problems yourself.
Symptoms
Possible Solutions
•
•
•
Check connection integrity at both ends of the video cable
Electric outlet verification
Ensure power button is depressed fully
No picture
•
•
•
Increase brightness via OSD
Perform monitor self-test feature check
Check for bent or broken pins
No picture or no brightness
•
•
•
•
Auto Adjust via OSD
Eliminate video extension cables
Perform monitor reset
Lower video resolution or increase font size
Picture is fuzzy, blurry or ghosting
27
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
•
Auto Adjust via OSD
Perform monitor reset
Check environmental factors
Relocate and test in another room
Wavy picture or fine movement
•
•
Cycle power on-off
These are pixels that are permanently off and is a natural defect
that occurs in LCD technology
LCD screen has spots
•
•
Cycle power on-off
These are pixels that are permanently on and is a natural defect
that occurs in LCD technology
LCD screen has bright spots
•
•
•
Perform monitor reset on "Factory Reset"
Auto Adjust via OSD
Adjust brightness via OSD
Picture too dim or too bright
Screen not centered correctly
•
•
•
•
Perform monitor reset on "Display Reset"
Auto Adjust via OSD
Adjust brightness via OSD
Ensure monitor is in proper video mode
•
•
•
Perform monitor reset on "Display Reset"
Auto Adjust via OSD
Perform monitor self-test feature check and determine if these
lines are also in self-test mode
Screen has one or more lines
•
Check for bent or broken pins
•
•
•
Perform monitor reset on "Display Reset"
Auto Adjust via OSD
Perform monitor self-test feature check to determine if scrambled
screen appears in self-test mode
Check for bent or broken pins
Boot up in the "safe mode"
Screen is scrambled or appears
torn
•
•
•
•
Do not perform any troubleshooting steps
Monitor needs to be replaced
Visible signs of smoke or sparks
Monitor malfunctions on & off
•
•
Ensure monitor is in proper video mode
Ensure video cable connection to computer and to the flat panel is
secure
Perform monitor reset on "Factory Reset"
Perform monitor self-test feature check to determine if the
intermittent problem occurs in self-test mode
•
•
28
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
Perform monitor self-test feature check
Check connection integrity at both end of the video cable
Check for bent or broken pins
Picture missing color
Picture color not good
•
•
•
Change the color to "PC Custom Color" or "MAC Custom Color"
Adjust R/G/B value of "PC Custom Color" or "MAC Custom Color"
Change the Color Format to "PC RGB" or "YPbPr" (for Video/DVI-
HD inputs)
•
•
Use the Power Management feature to turn off the monitor at all
times when not in use
Alternatively, use a dynamically changing screen saver
Faint shadow from the static image
displayed appears on the screen
29
Download from Www.Somanuals.com. All Manuals Search And Download.
7. SERVICE INFORMATION
7.1Product Registration and Customer Support
Should you require any assistance with the installation or troubleshooting of the EVGA
you’ll be able to download drivers, check out our extensive Knowledge Base, and submit
technical and customer support inquiries. Be sure to visit the EVGA community message
Contact our Customer Service through email to get all of your questions answered and
problems resolved – it’s fast, it’s easy, and it works! If you require immediate assistance,
please contact our Customer Service at 888.880.EVGA (3842).
before contacting customer service:
-Product Name & Part Number
-UPC Number
-Serial Number
The EVGA Advanced RMA (EAR) Program is a program to protect yourself and your product
7.2Pixel Policy
The EVGA monitor is evaluated on the number of acceptable non-performing pixels and the
distance between each non-performing pixels. The terms “non-performing” and “defective
pixels/sub-pixels” are used interchangeably for ease of identification. All monitors have been
tested to ensure they comply with this standard.
To identify non-performing pixels, the monitor shall be viewed under normal operating
conditions, preferably in its native resolution, and from a normal viewing distance of at least
50 cm (16 in.).
During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to
become fixed in an unchanging state. The visible result is a fixed pixel that appears as an
extremely tiny dark or bright discolored dot. When the pixel remains permanently lit, it is
known as a “bright dot.” When the pixel remains black, it is known as a “dark dot.”
In almost every case, these fixed pixels are hard to see and do not detract from display
quality or usability. A display with 1 to 5 bright or dark dots is considered normal and within
industry standards.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Your LCD display is subject to replacement if it meets the criteria outlined in the following
table:
Product Bright Dots Dark Dots Total Dots
Combination of Bright
and Dark = 6 or more
InterView 6 or more
6 or more
7.3Warranty Terms and Conditions
EVGA monitors are covered by a 3 Year limited warranty with registration within 30 days of
the purchase date as stated on the terms and conditions. Please also note the model number,
the serial number, the date of purchase, and keep a copy of the purchase invoice on hand.
1. EVGA warrants that the monitor you have purchased is free from manufacturing defects in
materials and workmanship when dispatched from our warehouse. The receipt of purchase shall
be provided as proof of the date of purchase and the warranty period commences as of that date.
2. The warranty service only covers the monitors which have been purchased in local country.
3. Proof of purchase will be required in the event of any discrepancy.
4. The warranty will not apply to any monitor purchased from a dealer/reseller other than an
authorized EVGA dealer/reseller. The warranty automatically becomes void if the product has been
physically damaged or rendered defective –
(a) as a result of an accident, misuse, fire, lightning, malicious damage, water damage, abuse or
other circumstances beyond EVGA’s control;
(b) by the use of parts or peripherals not authorized by EVGA;
(c) as a result of normal wear and tear;
(d) by use in an improper operating environment;
(e) by modification of the monitor;
(f) by the serial number or product code sticker being removed or defaced;
(g) as a result of a service rendered by anyone other than EVGA authorized service centre or its
authorized service agents
(h) as a result of the monitor not being operated in conformity with EVGA’s user manual.
5. In all circumstances, the user must ensure that the monitor is packed in appropriate packing. Any
damage due to improper packing will be chargeable to the customer.
6. EVGA authorized service centre will be chargeable at current applicable hourly rates to the
customer if –
(a) the technician finds the problem is user related;
(b) caused by change in normal settings of the monitor or caused by user computer (software,
settings … etc);
(c) determined to be causes not covered by this warranty and/or fallen within the scope as
prescribed in item 5.
7. The customer must ensure that they are available when the service centers’ representative arrives
to pick up or deliver the monitor. Any additional visits made due to the customer’s unavailability
will be chargeable to the customer or the customer can bring (or pick up) the monitor to (from)
the service centers’ agent at their own cost.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Software related faults resulting from incorrect software installation or usage or software viruses
or software inherent bugs shall not be considered as product faults and may incur a charge for
rectification.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
8. COMPLIANCE INFORMATION
8.1FCC Notice
This device complies with FCC Rules Part 15, Operation is subject to the following two conditions:
1)
received, including interference that may cause undesired operation.
2) This equipment has been tested and found to comply with the limits for a Class B digital device,
This device may not cause harmful interference, and this device must accept any interference
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the manufacturer’s instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1)
2)
Increase the separation between the equipment and signal source.
Connect the equipment to an outlet on a circuit different from that to which the signal source is
connected.
3)
4)
Consult the dealer or an experienced computer technician for help.
The use of shielded cables for connection of the monitor to the graphics card is required to
ensure compliance with FCC regulations. Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to operate this equipment.
The following information is provided on the device or devices covered in this document in compliance
with the FCC regulations:
Product name: Dual Monitor System
Model number: EVGA InterViewTM 1700
Company name: EVGA® Corporation
2900 Saturn Street, Suite B
Brea, California, 92821 USA
33
Download from Www.Somanuals.com. All Manuals Search And Download.
9. LEGAL INFORMATION
9.1Trademark Information
1)
2)
EVGA Corp., EVGA, the EVGA logo and combinations,
INTERVIEW and INTERVIEW in lower or cap combinations,
thereof are trademarks of EVGA Corp. All brand names, company names, service marks, logos, and
trademarks of the company, or its affiliates or licensors are trademarks or registered trademarks of
the company or its subsidiaries, affiliates or licensors in the US and other countries. Other company,
products and service names may be trademarks or service marks of others. EVGA reserves the right
to terminate this license if there is a violation of its terms or default by the Original Purchaser. Upon
termination, for any reason, all copies of Software and materials must be immediately returned to
EVGA and the Original Purchaser shall be liable to EVGA CORP for any and all damages suffered as a
result of the violation or default.
9.2Software License Agreement
This EVGA software (the “software”) is copyrighted by EVGA CORP and is protected by US law. All
rights reserved. The purchaser is granted a license to use the software only, subject to the following
restrictions and limitations:
1)
The license is for the original purchaser only, it is transferable so long as all items bundled with
the software are transferred to the same individual as a sale (e.g. all software, manuals, hardware,
etc.)
2)
The original purchaser may use the software on a single computer owned or leased by the
original purchaser. You may not use the software on more than a single machine, even if you own or
lease more than one machine, without the written consent of EVGA
3)
The original purchaser may make backup copies of the software for his or her own use only,
subject to the use limitations of this license. The original purchaser may not engage in, nor permit
third parties to engage in, any of the following:
- Providing or disclosing the software to third parties
- Providing use of the software in a computer service business, network, time-sharing network
- Making alterations or copies of any kind in the software (except as permitted above)
- Attempting to un-assemble, de-compile or reverse engineer the software in any way
- Granting sublicenses, leases, or rights in the software to others
- Making copies, or verbal or media translations, of the user’s guide
- Making telecommunication data transmissions of the software
9.3Rights
ALL MATERIAL INCLUDING BUT NOT LIMITED TO, TEXT, DATA, DESIGN SPECIFICATIONS, DIAGNOSTICS, GRAPHICS, LOGOS, REFERENCE
BOARDS, FILES, IMAGES, DRAWINGS, AND SOFTWARE INCLUDING THIS DOCUMENT AND THE SOFTWARE ITSELF (TOGETHER AND
SEPARATELY) IS OWNED, CONTROLLED BY, LICENSED TO, OR USED WITH PERMISSION BY COMPANY AND IS PROTECTED BY
COPYRIGHT, TRADEMARK, AND OTHER INTELLECTUAL PROPERTY RIGHTS. ALL IS BEING PROVIDED “AS IS”, EVGA CORPORATION MAKES
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE WITH RESPECT TO THE MATERIALS AND EXPRESSLY
DISCLAIMS ALL IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE. IN NO
EVENT SHALL THE LIABILITY OF EVGA CORPORATION FOR CLAIMS ARISING FROM THE USE OF THE MATERIALS BY ANYONE EXCEED
THE ORIGINAL PURCHASE PRICE OF THE MATERIALS (OR REPLACEMENT OF THE MATERIALS AT EVGA CORPORATION’S OPTION). ALL
INFORMATION FURNISHED IS BELIEVED TO BE ACCURATE AND RELIABLE. HOWEVER, EVGA CORPORATION ASSUMES NO
RESPONSIBILITY FOR THE CONSEQUENCES OF USE OF SUCH INFORMATION OR FOR ANY INFRINGEMENT OF PATENTS OR OTHER
RIGHTS OF THIRD PARTIES THAT MAY RESULT FROM ITS USE, OR USE OF THE SOFTWARE. NO LICENSE IS GRANTED BY IMPLICATION
OR OTHERWISE UNDER ANY PATENT OR PATENT RIGHTS OF EVGA CORPORATION EXCEPT AS EXPRESSLY PROVIDED HEREIN. ALL
SPECIFICATIONS MENTIONED IN THIS PUBLICATION ARE SUBJECT TO CHANGE WITHOUT NOTICE.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
|