19" LCD TV
DX-LCD19-09
USER GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
3
CHILD SAFETY
It makes a difference how and where you use
your flat panel display
As you enjoy your new product, keep these
safety tips in mind
The issue
The home theater entertainment experience is a growing trend, and larger TVs are popular
purchases. However, TVs are not always supported on the proper stands or installed
according to the manufacturer’s recommendations. We and the consumer electronics
industry are committed to making home entertainment enjoyable and safe.
TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers,
chests, or carts may fall over and cause injury.
Tune into safety
•
•
•
•
•
One size of TV stand does not fit all. Use only a TV stand
rated for the weight of your TV.
Carefully read and understand all enclosed instructions for
proper use of this product.
Don’t let children to climb on or play with entertainment
system furniture and TVs.
Don’t place TVs on furniture that can easily be used as
steps, such as a chest of drawers.
Remember that children can become excited while watching
a program, especially on a “larger-than-life” TV. Make sure
that you place or install the TV where it cannot be pushed,
pulled over, or knocked down.
•
Make sure that you route all cords and cables so that they
cannot be pulled or grabbed by curious children.
Wall mounting
If you decide to wall mount your TV, always:
•
One size of wall mount does not fit all. Use only a wall mount rated for the weight of your
TV and that has been recommended by this TV manufacturer, listed in this manual, or
otherwise listed by an independent laboratory (such as UL, CSA, or ETL) as suitable for
your TV.
•
•
Follow all instructions supplied by the TV and wall mount manufacturers.
If you have any doubts about your ability to safely wall mount your TV, get help from a
professional installer.
•
Make sure that the wall where you are mounting the TV is
appropriate. Some wall mounts are not designed to be mounted
to walls backed with steel studs or cinder blocks. If you are
unsure, ask a professional installer.
•
TVs can be heavy. At least two people are required for safe wall mount installation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety instructions
4
Handling the LCD panel
Important safety instructions
• Your TV's screen is made of glass. Do not drop your TV or hit, jolt,
or press hard against the LCD panel. If the screen breaks, be
careful of broken glass.
This symbol indicates that dangerous
voltage constituting a risk of electric shock is
present within your TV. This label is located
on the back of your TV.
• If the LCD panel is broken, make absolutely sure that you do not
touch the liquid in the panel. This may cause skin inflammation.
• If the liquid gets in your mouth, immediately gargle, rinse, and
consult with your doctor. Also, if the liquid gets in your eyes or
touches your skin, consult with your doctor after rinsing for at
least 15 minutes or longer in clean water.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
your TV.
Replacement parts
When replacement parts are required, make sure that the service
technician uses replacement parts specified by the manufacturer that
have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, personal injury, or other
hazards.
1
2
3
4
5
6
7
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Safety check
After completing any service or repair to this device, ask the service
technician to perform routine safety checks to determine that your TV is
in correct operating condition.
Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
Power source
Operate your TV only from the type of power source indicated on the
marking label. If you are not sure of the type of power supplied to your
home, consult an electrician or your local power company.
8
9
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong is
provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete
outlet.
Cautions
Damage requiring service
Unplug this TV from the power outlet and refer servicing to qualified
service personnel under the following conditions:
• When the power supply cord or plug is damaged or frayed.
• If liquid has been spilled or objects have fallen into your TV.
• If your TV has been exposed to rain or water.
• If your TV does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions because incorrect adjustment of other
controls may result in damage and will often require extensive
work by a qualified technician to restore your TV to its normal
operation.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11 Only use attachments/accessories specified by the manufacturer.
12 Use only with a cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
• If your TV has been dropped or damaged in any way.
• When your TV exhibits a distinct change in performance.
Attachments
Use only attachments recommended by Dynex.
13 Unplug this apparatus during lightning storms
or when unused for long periods of time.
14 Refer all servicing to qualified service personnel.
Warnings
Electric shock hazard
To reduce the risk of electric shock, do not remove any cover or expose
the device to rain or moisture. No user-serviceable parts are inside.
Refer servicing to qualified service technicians.
Lightning
For added protection for your device receiver during a lightning storm,
or when it is left unattended and unused for long periods of time,
unplug it from the power outlet and disconnect any antenna or cable
system. This helps prevent property damage and personal injury from
lightning and power line surges.
Power lines
An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it
can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
5
Outdoor antenna grounding
Features
Front
If an outside antenna or cable system is connected to your TV, make sure
that the antenna or cable system is grounded to provide some
protection against voltage surges and built-up static charges. Article
810 of the National Electrical Code, ANSI/NFPA No. 70, provides
information with respect to correct grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of the
antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
VOL +
VOL -
CH
CH
MENU
INPUT
POWER
7
6
5
4
#
Button
Description
3
1
VOL+
Press to increase the volume. In Menu
mode, functions as the right arrow to
go to the next menu or increase a
setting.
Press to decrease the volume. In
Menu mode, functions as the left
arrow to go to a previous menu or
decrease a setting.
Press to go to the next higher
channel. In Menu mode, functions as
the up arrow.
Press to go to the next lower channel.
In Menu mode, functions as the
down arrow.
1
2
1
2
Electric service equipment
Power service grounding electrode
system
2
VOL–
3
4
5
6
7
Ground clamps
Grounding conductors
Antenna discharge unit
Grounding clamp
3
4
CH
CH
Antenna lead-in wire
Note to CATV system installer
Article 820 of the National Electrical Code, ANSI/NFPA No. 40 provides
guidance for correct grounding. Specifically, it states that the cable
ground must be connected to the grounding system of the building as
close to the point of cable entry as practical.
5
6
MENU
INPUT
Press to show the on-screen menu.
Press to open the input source menu,
then press the arrow buttons to cycle
through the available input sources.
7
POWER
Press to turn on your TV or put it into
Standby mode.
Condensation
Moisture will form on the TV if the TV is brought from cool surroundings
into a warm room or if the temperature of the room rises suddenly.
When this happens, the TV's performance may be impaired. To prevent
this, let the TV stand in its new surroundings for about an hour before
switching it on, or make sure that the room temperature rises gradually.
Condensation may also form during the summer if the TV is exposed to
the breeze from an air conditioner. In such cases, change the location of
the TV.
Mobile telephone warning
To avoid interference with your TV picture and sound, operating
problems, or even damage, keep your cordless and cellular telephones
away from the TV.
End of life directives
Your TV contains tin-lead solder and a fluorescent lamp containing a
small amount of mercury. Disposal of these materials may be regulated
for environmental reasons. Your TV also contains material that can be
recycled and reused. For disposal or recycling information, contact your
find a recycler in your area.
Non-active pixels
The LCD panel contains almost 3 million thin film transistors, which
provide exceptionally sharp video quality. Occasionally, a few nonactive
pixels may appear on the screen as a fixed blue, green, or red point.
These non-active pixels do not adversely affect the performance of your
TV, and are not considered defects.
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
6
Remote control
#
Button
Description
13
P.LOCK
Press to activate or deactivate
parental controls. See “Setting
parental controls” on page 10 for
information on setting up
parental controls.
1
2
3
4
INPUT DISPLAY
POWER
TV
18
19
20
14
15
ZOOM
Press to select the display aspect
ratio.
VIDEO
COMP
HDMI
1
4
7
2
5
8
0
3
6
MTS/SAP
In NTSC mode, press to select one
of the preset audio modes. You
can select MONO, STEREO, or
SAP (secondary audio program).
In ATSC mode, press to select the
audio language.
5
6
9
RECALL
21
22
16
17
PICTURE
SLEEP
Press to select the Brightness or
Contrast setting. You can adjust
these settings without opening
the on-screen menu.
MUTE
7
8
9
CH
CH
EXIT
VOL
FAVORITE
VOL
Press to set the sleep timer. For
more information, see “Setting
the sleep timer” on page 10.
23
24
25
MENU
10
18
19
COMP
TV
Press to select the component
source mode.
ENTER
11
Press to select the ATSC (digital),
or NTSC (analog) TV source.
12
P-LOCK
ZOOM
MTS/SAP
SLEEP
CCD
20
21
HDMI
Press to select the HDMI mode.
26
27
13
FREEZE
Press to watch the previous
channel.
RECALL
14
15
16
17
PICTURE
AUDIO
22
23
24
Press to tune to the next higher
channel in the channel list.
CH
28
Press to tune to the next lower
channel in the channel list.
CH
ZRC-102
FAVORITE
Press to toggle the
Favorite/Normal mode. See
“Setting up the channel list” on
page 9 for more information.
#
Button
POWER
INPUT
Description
25
26
EXIT
CCD
Press to close the on-screen
menu.
1
Press to turn on your TV or put it
into Standby mode.
Press to turn closed captions on
and off. For more information, see
“Viewing closed captions” on
page 10.
2
3
4
5
Press to cycle through the
available input sources.
DISPLAY
VIDEO
Press to display status
information.
27
28
FREEZE
AUDIO
Press to freeze the video image.
Press again to unfreeze the
image. Do not freeze the video
image for long periods of time.
You may damage the TV screen.
Press to toggle between S-Video
and composite source modes.
Number
buttons
Press to enter channel numbers.
In the on-screen menu, press to
enter your parental control
password.
Press to select the bass or treble
setting. You can adjust these
settings without opening the
on-screen menu.
6
–
Use with the 0-9 number buttons
and ENTER button to select
digital channels.
Using the remote control
To use the remote control:
7
8
VOL +
MUTE
Press to increase the volume.
• Point the remote control towards the remote sensor on the front
of your TV.
Notes:
Do not expose the remote control to shock or liquids.
Do not use the remote control in an area with high humidity.
Do not place the remote control in direct sunlight.
Do not place objects, such as furniture, between the remote control and
the remote sensor.
Press to mute the sound. Press
again to restore the sound.
9
VOL –
MENU
Press to decrease the volume.
10
Press to open the on-screen
menu.
11
12
Press to move down, up, left, or
right in the on-screen menu.
The remote control may not work if direct sunlight or bright light shines on
the remote sensor. Either move your TV or change the angle at which
you use the remote control.
ENTER
Press to confirm changes or to
turn options on and off in the
on-screen menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up your TV
7
Connecting an outside antenna
Setting up your TV
Installing remote control batteries
Antenna cables come in two types: 75 ohm and 300 ohm.
75 ohm cable
To install the remote control batteries:
1
Remove the battery cover.
300 ohm cable
• If your antenna cable has a 75 ohm connector, connect the cable
to the coaxial jack on the back of your TV.
• If your antenna cable has a 300 ohm connector, connect the cable
to a 300-75 ohm adapter (not included), connect the adapter to a
75 ohm cable, then connect the other end of the 75 ohm
connector to the coaxial jack on the back of your TV.
2
Insert two AAA batteries into the battery compartment. Make
sure that you match the + and – symbols on the batteries with
the + and – symbols in the battery compartment.
Connecting cable TV
Your TV has a 75 ohm jack for connecting cable TV.
Some cable TV providers scramble the signals for “premium” (pay)
channels. To view these channels, you need a converter/descrambler
box.
If you do not have a converter/descrambler box, you can connect your
cable TV directly to your TV. If you have a converter/descrambler box,
you can connect your cable TV using an RF switch (not supplied). For
more information about connecting a converter/descrambler box,
contact your cable TV provider.
To connect cable TV without a converter/descrambler box:
1
Connect one end of a 75 ohm cable to the coaxial jack on the back
of your TV.
2
Connect the other end of the cable to the cable TV wall outlet.
3
Replace the cover.
Notes:
To connect cable TV with a converter/descrambler box:
• Use the following illustration to connect a converter/descrambler
box. (The RF switch and the signal splitter are not provided.)
Set the RF switch to the A position to tune to unscrambled
channels using your TV remote control. Set the RF switch to the B
position to watch scrambled channels using the
Do not mix batteries of different types.
Do not mix old and new batteries.
Remove batteries when the charge is depleted.
Battery chemicals can cause a rash. If the batteries leak, clean the battery
compartment with a cloth. If chemicals touch your skin, wash
immediately.
converter/descrambler controls.
Two-set signal splitter
RF switch
If the remote control is not going to be used for an extended period of time,
remove the batteries.
A
B
Connecting your TV to a power outlet
In
Out
To connect your TV to a power outlet:
• Plug the power cord into a power outlet.
Notes:
TV
Cable converter/descrambler box
Make sure that you use the correct type of power. See the label on your TV.
If you do not intend to use your TV for an extended period of time, unplug
the power cord from the power outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your TV
8
Connecting to an external signal source
Connecting a computer
You can connect a DVD, VCD, VCR, or STB using a variety of methods,
including composite cables, component cables, an S-Video cable, or an
HDMI cable. The S-Video cable does not carry sound. If you use an
S-Video cable, you need to use audio cables to connect the audio
output.
You can connect a computer using the HDMI or VGA jack on the back of
your TV.
Warning: Make sure that you turn off and unplug your TV before
installing devices.
Note: When the computer goes into standby mode, your TV turns off. If
your TV does not turn on when you “wake” your computer, press the
POWER button on your TV or remote control.
Warning: Make sure that you turn off and unplug your TV before
connecting devices.
To connect a computer using VGA:
Note: For better video, use the S-Video jack if your device has an S-Video
connection. For best video, use the HDMI jack if your device has an
HDMI connection.
1
Plug a VGA cable from your computer into the VGA jack on the
back of your TV.
To connect an external signal source:
1
For composite video—Plug the audio/video cable into the
AUDIO L, AUDIO R (2), and VIDEO (4) jacks on the back of your
TV, then connect the other ends to the corresponding jacks on the
external signal source.
Or
For S-Video—Plug in the audio cables as described above, then
plug one end of an S-Video cable into the S-VIDEO (5) jack on the
back of your TV, then plug the other end into the S-Video jack on
the external signal source.
Or
For component video—Plug the Y, Pb, and Pr video cables
into the COMPONENT (3) jacks and the Audio L and Audio R
cables into the AUDIO (6) jacks on the back of your TV, then plug
the other ends of the cables into the corresponding jacks on the
external signal source.
PC IN
VGA
AUDIO
Or
For HDMI—Plug one end of an HDMI cable into the HDMI (1)
jack on the back of your TV, then plug the other end into an HDMI
device.
Audio cable
VGA cable
2
Plug an audio cable from your computer’s audio out jack into the
AUDIO jack on the back of your TV.
3
4
Plug in and turn on your TV.
Press INPUT repeatedly to select the VGA input source.
To connect a computer using HDMI:
TV
• Plug an HDMI cable into the HDMI INPUT jack on the back of
your TV and into the HDMI Out jack on the back of the computer.
Using your TV
Turning your TV on and off
To turn your TV on and off:
1
Make sure that the power cord is connected to your TV and a
power outlet.
2
3
Press to turn on your TV. The power indicator LED turns green.
Press again to return your TV to standby. The power indicator
LED turns red.
1
PC IN
VGA
AUDIO
SPDIF
4
5
AV IN
2
ANTENNA
/
CABLE
DIGITAL ANALOG
/
3
6
Pr
Pb
2
3
Turn on your TV.
Press INPUT repeatedly to select the external signal source you
want to watch.
4
5
Turn on external signal source.
Insert a disc or videotape into the external signal source, then
press PLAY.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your TV
9
Selecting the TV signal source
Changing channels
To select the TV signal source:
To change channels:
• With the TV on, press INPUT on either the TV or the remote to
• Press CH or CH on the remote control to go to the next
lower or higher channel.
Or
Press the number buttons to directly select a channel (for
example, if you want channel 83, press 8, then press 3).
choose from:
• TV
• Composite
• S-Video
• Component
Or
• VGA
Press RECALL to go to the last viewed channel.
• HDMI
Note: HDMI, the HDMI logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
Selecting a digital sub-channel
Most digital TV channels have more than one channel. The main
Setting up the channel list
channel carries the signal for the main TV program. The sub-channels
carry signals for additional or alternate programming, such as a radio or
news broadcast.
After you select your TV source, if you selected antenna or cable you
need to set up the channel list. When you set up your channel list, your
TV searches for all available channels in your area and stores a list of
these channels. When you press CH – or CH +, your TV skips the
channels that do not have a signal.
For example, if the main channel number is 8, the sub-channel number
might be 8-1, 8-2, or 8-3.
To select a sub-channel:
1
2
Press the number buttons for the main channel (for example 8).
Press –, then press the sub-channel button (for example 1).
Automatically setting up channels
To automatically set up the channel list:
1
Press MENU. The on-screen display menu opens with Setup
highlighted.
Adjusting the volume
To adjust the volume:
• Press VOL – or VOL + to decrease or increase the volume.
• Press MUTE to turn off the sound. Press MUTE again to turn the
sound back on.
Displaying status information
To display status information:
• Press DISPLAY. Your TV displays status information, such as the
channel number or signal source.
Checking the DTV signal strength
To check the DTV signal strength:
ENTER
1
Press MENU. The on-screen display menu opens with Setup
highlighted.
2
3
Press to enter the sub-menu, then press or to highlight
2
Press to enter the sub-menu, then press or to highlight
DTV Signal. The DTV signal meter opens.
Auto Ch Search.
Press ENTER or to start the search.
Note: You can press Exit to stop the search.
Manually adding or deleting channels from the
channel list
After you create a channel list using the Auto Ch Search option, you
can manually add or delete channels from the channel list.
To add or delete channels:
3
Press MENU or EXIT to close the menu.
Adding a channel label
1
2
3
4
Press MENU. The on-screen display menu opens with Setup
To add a label to a channel:
highlighted.
1
2
3
4
5
Press MENU. The on-screen display menu opens with Setup
highlighted.
Press to enter the sub-menu, then press or to highlight
Channel Labels. The Channel Label menu opens.
Press to enter the sub-menu, then press or to highlight
Manual Channel Set. The Channel Setup Table opens.
Press or to select a channel, then press ENTER to toggle
between viewable and not viewable.
Press or to move the cursor to the channel field, then press
Press MENU or EXIT to close the menu.
or to select a channel.
Press or to move the cursor to the label field, then press
or to select the character.
Press ENTER to return to the previous menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your TV
10
Freezing the picture
Viewing closed captions
Note: To select or customize digital closed captions, use the Digital
You can freeze (still) the screen image.
Captions or Digital Closed Caption sub-menus in the Feature
Caution: To protect your TV, do not freeze the screen image for long
menu.
periods of time.
To freeze or unfreeze the picture:
• Press FREEZE.
To view closed captions:
• Press CCD repeatedly to select a closed caption option. You can
select:
Setting the clock
• On
• Off
To set the clock:
• On When Mute
1
Press MENU. The on-screen display menu opens with Setup
highlighted.
Setting parental controls
2
Press or repeatedly to highlight Feature. The Feature
menu opens.
Your TV has a V-chip that lets you control the type of programs your
children can watch. Parental controls include two ratings: MPAA (based
on age) and TV Parental Guidelines (based on content and age). A TV
program may have an MPAA or TV Parental Guidelines rating, so you
should set controls for both ratings.
Before you can select ratings, you need to set up a parental controls
password.
To set up a password:
1
2
3
4
Press MENU. The on-screen display menu opens with Setup
highlighted.
Press or repeatedly to highlight Feature. The Feature
menu opens.
Press to enter the sub-menu, then press or to highlight
Password Set.
Press the number buttons to enter the old password. If you have
not set a password, enter 0000. Press ENTER to continue.
ENTER
3
Press to enter the sub-menu, then press or to highlight
Time Set. The Time Set menu opens.
5
6
Press the number buttons to enter a new password. Press ENTER
to continue.
Press the number buttons to enter the new password again, to
confirm. Press ENTER to continue.
4
5
Press or move to the different fields, then press or to
change the settings.
Press MENU or EXIT to close the menu.
Caution: Write down your password and save it for future use.
Note: If you forget your password, enter 3448 for the old password, then
enter a new password. This password always remains valid for
resetting your password.
Setting the sleep timer
The sleep timer lets you select the amount of time before your TV turns
off automatically.
Setting the Parental Control level
To set the Parental Control level:
To set the sleep timer:
1
2
3
4
Press MENU. The on-screen display menu opens with Setup
highlighted.
Press or repeatedly to highlight Feature. The Feature
menu opens.
Press to enter the sub-menu, then press or to highlight
Sleep Timer.
Press or to select the amount of time (Off, 5 min, 10 min,
15 min, 30 min, 45 min, 60 min, 90 min, 120 min, 180 min,
or 240 min). To turn off the timer, select Off.
1
2
3
Press MENU. The on-screen display menu opens with Setup
highlighted.
Press or repeatedly to highlight Feature. The Feature
menu opens.
Press to enter the sub-menu, then press or to highlight
Parental Control. The Password screen opens.
Note: You can also press SLEEP to set the sleep timer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your TV
11
4
Press the number buttons to enter the password. Press ENTER to
continue. The Parental Control Menu opens.
Canadian MPAA Ratings
Rating
Description
C
Children.
C8+
G
Children 8 years and above.
General audience.
PG
14+
18+
X
Parental guidance suggested.
14 years old and above.
Adult programming.
Adults only.
ENTER
TV Parental Guidelines ratings
5
Press or to select USA Parental Locks or Canadian
Parental Locks, then press ENTER. The lock menu that you have
selected opens.
Rating
Description
NONE
TV-Y
Not rated.
USA Parental Locks
All children.
TV-Y7
TV-G
Children over seven years.
General audiences.
TV-PG
TV-14
TV-MA
Parental guidance suggested.
Parents strongly cautioned.
Mature audiences only.
Some of the age-based TV Parental Guidelines ratings also have
content-based ratings.
Rating
Description
ENTER
FV
L
Fantasy violence.
Adult language.
Sexual situations.
Violence.
6
7
8
Press or , or or to move to a rating, then press ENTER
to select the rating.
S
When you block a rating, that rating and all higher ratings are
blocked.
Press MENU or EXIT to close the menu.
V
D
Sexually suggestive dialog.
Using the on-screen menu
American MPAA ratings
Your TV has an on-screen menu that lets you adjust TV settings, such as
video and audio settings.
Rating
Description
To use the on-screen menu:
NONE
G
Not rated.
1
2
3
Press MENU. The on-screen display menu opens.
Press or repeatedly to select a menu item.
Press or to enter a sub-menu.
General audiences.
PG
Parental guidance suggested. Some
material may not be suitable for
children.
PG-13
R
Parental guidance strongly
suggested. Some material may not
be suitable for children under 13
years of age.
Restricted. Not suitable for children
under 17 years of age unless
accompanied by a parent or
guardian.
NC-17
X
Not suitable for children under 17
years of age.
Adults only.
ENTER
4
5
Press ENTER or to confirm an adjustment or toggle a setting.
Press MENU or EXIT to close the on-screen display menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintaining
12
On-screen menus
On-screen menu Options
Feature
information, see “Setting the clock” on page
On-screen menu Options
Setup
information, see “Setting the sleep timer” on
page 10.
(Air or Cable).
DTV Signal–Displays the digital TV signal
strength. For more information, see
“Checking the DTV signal strength” on page
9.
Advanced Video Set–
• Noise Reduction–Select from Low, Mid,
High, and Off.
Auto Ch Search–Automatically sets up a list
of the channels available in your area. For
more information, see “Automatically setting
up channels” on page 9.
Add On Ch Search–Lets you add new
channels without going through the entire
list of available channels.
• Color Temperature–Select from Normal,
Warm, and Cool (default).
• 3D Y/C–Choose from On (default) or Off.
• Setting–Restores the settings to factory
default.
• Dynamic Contrast–Choose from On
(default) or Off.
Manual Ch Set–Lets you add or delete
channels from the channel list. For more
information, see “Manually adding or
deleting channels from the channel list” on
page 9.
Password Set–Lets you set the password for
parental control options. The default
password is 0000. See “Setting parental
controls” on page 10.
Parental Control–Accesses V-chip controls.
For more information, see “Setting parental
controls” on page 10.
Digital Caption–Sets the digital caption
type. Choose from Service 1-6, Text 1-4, and
CC 1-4.
Closed Caption Options–Customizes closed
captions for digital broadcasting systems.
You can adjust Size, Font, Text Color, Text
Opacity, Background Color, Background
Opacity, Edge Effect, and Edge Color.
Component Set–Only available in
component mode. Lets you set Horizontal
Position (0 ~ 100), Vertical Position (0 ~ 100),
Clock (0 ~ 100), and Phase (0 ~ 100). The
Settings option restores the settings to
factory default.
Channel Labels–Lets you add a label to a
channel. For more information, see “Adding a
channel label” on page 9.
Menu Language–Selects the language for
the on-screen menu. You can select English,
French, or Spanish.
Aspect Ratio–Selects the screen aspect ratio:
Normal, Wide1, Wide2, Zoom, or Cinema.
You can also press ZOOM to select the aspect
ratio.
Favorite Channel mode–Lets you edit your
favorite channel list. Press FAVORITE on the
remote to toggle this mode on or off.
Video
Contrast–Increases the picture level to
(Options may
adjust the white areas of the picture.
vary in different Decreases the picture level to adjust the
modes.)
VGA Set–Only available in VGA mode. Lets
you set Horizontal Position (0 ~ 100), Vertical
Position (0 ~ 100), Clock (0 ~ 100), and Phase
(0 ~ 100). You can also select Auto Adjust to
automatically adjust the settings. The
Settings option restores the settings to
factory default.
black areas of the picture. (0 ~ 100)
Brightness–Increases the brightness to add
more light to dark areas of the picture.
Decreases the brightness to add more dark to
light areas of the picture. (0 ~ 100)
Sharpness–Increases the sharpness for a
cleaner and clearer image. Decreases the
sharpness for a smoother picture. (-50 ~ 50)
Color–Adjusts the overall color of the picture.
(0 ~ 100)
Input Label–Lets you modify the input label.
Maintaining
Tint–Increases the color level to add more
green to skin tones. Decreases the color level
to add more purple to skin tones. (R50 ~ G50)
Backlight–Adjusts the backlight level (0 ~
10).
Settings–Restores the video settings to
factory default.
• Do not use your TV in areas that are too hot or too cold, because
the cabinet may warp or the screen may malfunction.
• Storage temperatures are 32° to 122°F (0° to 50°C).
• Working temperatures are 41° to 104°F (5° to 40°C).
• Do not place your TV in direct sunlight or near a heat source.
Audio
Audio Language–Selects an alternate
(Options may
language if the program has more than one
Cleaning your TV
vary in different language available. Only available in ATSC TV
modes.)
mode.
Clean the screen and cabinet with a soft, lint-free cloth. If the screen or
cabinet is especially dirty, moisten a soft, lint-free cloth in a weak
detergent solution, squeeze the excess moisture from the cloth, then
wipe the screen or cabinet with the cloth. Use a clean cloth to dry the
screen or cabinet.
Bass–Adjusts the low sounds (bass).
Treble–Adjusts the high sounds (treble).
Balance–Adjusts the right and left speaker
volumes.
Digital Audio Output–Selects the audio
mode for the digital audio optical jack.
• RAW: AC-3 in - AC-3 out/PCM in - PCM out.
• PCM: AC-3 in - PCM out/PCM in - PCM out.
TV Speaker–Turns the internal TV speaker
On (default) or Off. Does not affect the digital
audio output, the headphone output, and
the composite audio output.
Cautions: Avoid the following, because it may cause damage to your TV:
Cleaning your TV with volatile substances, such as insect sprays, solvents,
and thinners.
Leaving items made from rubber or PVC in contact with your TV for long
periods.
Letting liquids drip into the cabinet.
Settings–Restores the audio settings to
factory default.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
13
Symptom
Possible solution
Troubleshooting
Poor picture
• Make sure that the room is not
Warning: Do not try to repair your TV yourself. Refer all service to a
too bright. Light reflecting off the
screen can make the picture
difficult to see.
qualified service technician.
• If an S-VHS camera or a camcorder
is connected while another
connected device is turned on,
the picture may be poor. Turn off
one or more devices.
Symptom
Possible solution
No power
• Make sure that the power cord is
connected to your TV and a
power outlet.
• Unplug the power cord, wait 60
seconds, then plug the cord back
in and turn on your TV.
Horizontal dotted line
• Your TV may be too close to
another electrical device, such as
a hair dryer or neon light. Turn off
the device or move your TV.
No picture
• Make sure that the video cables
are connected securely to the
back of your TV.
“Ghost” or double
image
• This may be caused by
obstructions to the antenna, such
as high-rise buildings or hills.
Using a highly directional
antenna may improve the picture
quality.
• Adjust the contrast and
brightness.
• Make sure that the correct video
mode is selected.
• Make sure that the incoming
signal is compatible.
Remote control does
not work
• Press TV.
• Make sure that the antenna is
connected correctly.
• Replace the batteries. Make sure
that the + and – symbols on the
batteries align with the + and –
symbols in the battery
• Check the closed caption settings.
Some TEXT modes can block the
screen.
compartment.
• Clean the remote sensor on the
front of your TV.
• Bright or fluorescent lighting may
interfere with the remote control
signal. Turn off the light or move
your TV.
Good picture but no
sound
• Increase the volume.
• Make sure that the sound is not
muted.
• Make sure that the correct audio
mode is selected.
Good sound but poor
color
• Adjust the contrast, color, and
brightness settings.
Snowy picture or noise
• Make sure that the A/V and
antenna cables are connected
correctly and securely.
VGA picture is not
stable or synchronized
• Make sure that you have selected
the correct VGA mode on your
computer.
No output from one of
the speakers
• Adjust the balance in the Sound
menu.
Control buttons do not
work
• Unplug the power cord, wait a
few seconds, then plug the cord
back in and turn on your TV.
After images appear
• Do not display a still image, such
as a logo, game, or computer
image, for an extended period of
time. This can cause a permanent
after image to be burned into the
screen. This type of damage is not
covered by your warranty.
Picture has a few bright • A few bright or dark dots on an
or dark dots
LCD screen is normal. It does not
affect the operation of this TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
14
3
Remove the base.
Appendix
Wall-mount hardware (sold separately) lets you mount your TV on a
wall.
For detailed information on mounting your TV on a wall, see the
instructions provided with the wall-mount hardware.
Contact a technician for assistance when installing the wall-mount
bracket. Best Buy is not responsible for any damage to your TV or injury
to yourself or others.
We suggest that you keep your TV at least 2.36 inches (60 mm) from the
wall to prevent cable interference.
Before you wall-mount your TV, you need to remove the base.
To attach a wall mount bracket to your TV:
1
Remove the four M4 screws holding your TV to the stand.
M4 screws
100 mm
4
Secure the wall mount bracket to the back of your TV using one
M4 screws, as indicated in the illustration.
Attach wall
bracket here
M4 screws
2
Remove the scew from the bottom of the base.
Screw
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
15
Specifications
Legal notices
Design and specifications are subject to change without notice.
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product is subject
to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply within the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Analog standard NTSC
Digital standard ATSC, 8-VSB, Clear-QAM
Screen
19-inch
Channel coverage VHF: 2-13
UHF: 14-69
CATV: Mid band - A-8 ~ A-1, A ~ I
Super band - J ~ W
Hyper band - AA ~ ZZ, AAA, BBB
Ultra band - 65 ~ 94, 100 ~ 135
Power source
AC 100~240 V 50/60 Hz
Power
consumption
<60 W
<1 W in standby mode
•
•
•
Reorient or relocate the receiving antenna.
Audio power
S-Video input
3 W + 3 W internal speaker
Y:1 V(p-p), 75 ohm, negative sync
C:0.286 V(p-p) (burst signal), 75 ohm
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Video/audio input Video:1 V(p-p), 75 ohm, negative sync
Audio:500 mV(rms)
•
Consult the dealer or an experienced technician for help.
FCC warning
Component input Y:1 V(p-p), 75 ohm, including sync
Pr/Cr: 0.35 V(p-p), 75 ohm
Pb/Cb: 0.35 V(p-p), 75 ohm
Audio:500 mV(rms)
Changes or modifications not expressly approved by the party responsible for
compliance with the FCC Rules could void the user’s authority to operate this
equipment.
Suggested resolutions:1080i, 720p,
480p, 480i
Cables
Connections to this device must be made with shielded cables with metallic RF/EMI
connector hoods to maintain compliance with FCC Rules and Regulations.
HDMI input
VGA input
1 HDMI input terminal
HDCP compliant
E-EDID compliant
Suggested scan rates:1080i, 720p,
480p, 480i
D-Sub 15-pin terminal
E-EDID compliant
Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.
Suggested scan rates:640×480 /60 Hz,
800×600 /60 Hz, 1024×768 /60 Hz,
1440×900 /60 Hz,
Audio input: Headphone mini-jack for
stereo
Dimensions
(W × H × D)
17.56 × 14.13 × 5.39 inches
(44.6 × 35.9 × 13.7 cm)
Weight
8.82 lbs. (4 kg)
Accessories
Power cord
User guide
Remote control
Batteries (2 AAA)
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal notices
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal notices
17
Contact Dynex:
One-year limited warranty
For customer service please call 1-800-305-2204
Dynex Products (“Dynex”) warrants to you, the original purchaser of this new
DX-LCD19-09 (“Product”), that the Product shall be free of defects in the original
manufacture of the material or workmanship for a period of one (1) year from the date
of your purchase of the Product (“Warranty Period”). This Product must be purchased
from an authorized dealer of Dynex brand Products and packaged with this warranty
statement. This warranty does not cover refurbished product. If you notify Dynex during
the Warranty Period of a defect covered by this warranty that requires service, terms of
this warranty apply.
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645
© 2009 Best Buy Enterprise Services, Inc.
All rights reserved. DYNEX is a trademark of Best Buy Enterprise Services, Inc. Registered
in some countries. All other products and brand names are trademarks of their
respective owners.
How long does the coverage last?
The Warranty Period lasts for one year (365 days) from the date you purchased the
Product. The purchase date is printed on the receipt you received with the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the material or workmanship
of the Product is determined to be defective by an authorized Dynex repair center or
store personnel, Dynex will (at its sole option): (1) repair the Product with new or
rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable
products or parts. Products and parts replaced under this warranty become the property
of Dynex and are not returned to you. If service of products and parts are required after
the Warranty Period expires, you must pay all labor and parts charges. This warranty
lasts as long as you own your Dynex Product during the Warranty Period. Warranty
coverage terminates if you sell or otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a retail store location, take your original receipt and the
Product to the store you purchased it from. Make sure that you place the Product in its
original packaging or packaging that provides the same amount of protection as the
original packaging. If you purchased the Product from an online web site, mail your
original receipt and the Product to the address listed on the web site. Make sure that
you put the Product in its original packaging or packaging that provides the same
amount of protection as the original packaging.
To obtain in-home warranty service for a television with a screen 25 inches or larger, call
1-888-BESTBUY. Call agents will diagnose and correct the issue over the phone or will
have an Dynex-approved repair person dispatched to your home.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the Product in the United States,
Canada, and Mexico.
What does the warranty not cover?
This warranty does not cover:
•
•
•
•
•
•
•
•
•
•
•
•
Customer instruction
Installation
Set up adjustments
Cosmetic damage
Damage due to acts of God, such as lightning strikes
Accident
Misuse
Abuse
Negligence
Commercial use
Modification of any part of the Product
Plasma display panel damaged by static (non-moving) images applied for
lengthy periods (burn-in).
This warranty also does not cover:
•
•
•
Damage due to incorrect operation or maintenance
Connection to an incorrect voltage supply
Attempted repair by anyone other than a facility authorized by Dynex to service
the Product
•
•
•
Products sold as is or with all faults
Consumables, such as fuses or batteries
Products where the factory applied serial number has been altered or removed
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE
REMEDY. DYNEX SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT,
INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST
BUSINESS OR LOST PROFITS. DYNEX PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES
WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE
PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF AND
CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO
WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY
PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY
TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE
OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal notices
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal notices
19
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
08-1682
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave. South, Richfield, MN 55423 U.S.A.
© 2009 Best Buy Enterprise Services, Inc. All rights reserved.
DYNEX is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries. All other
products and brand names are trademarks of their respective owners.
Download from Www.Somanuals.com. All Manuals Search And Download.
|