Quick Setup Guide
|
Soundbar Home Theater Speaker DX-SB114
Back of the soundbar
FEATURES
CONNECT THE SOUNDBAR
CONNECT THE SUBWOOFER
(OPTIONAL)
Connect one end of the subwoofer
speaker cable (not included) to the
subwoofer and the other end to the
soundbar.
Congratulations on your purchase
of a Dynex Soundbar Home
Theater Speaker System.
Top view
Choose one connection option below that fits your audio source device (e.g., TV, projector,
DVD/Blu-ray player, gaming console etc.).
Subwoofer
DC IN
18V
R
L
AUX IN
RCA IN
CAUTION: Turn off or unplug all devices while you are making connections.
NOTE: If you have multiple devices connected to a TV or projector, connecting directly to the TV or projector will ensure
audio plays through your soundbar from all of your devices.
SUBWOOFER OUT
OPTICAL IN
Package contents
Standby
Standard Theater
News
VOL
BASS
DSP
AUDIO QUALITY
BEST
JACK TYPE (on source device)
CABLE
Digital optical cable (not included)
Subwoofer cable (not included)
Soundbar
3.5 mm audio cable (included)
RCA Audio cable (included)
GOOD
GOOD
Back view
- PICK ONE -
CONNECT THE AC ADAPTER
CAUTIONS:
TV, projector, or
DC IN
18V
R
L
AUX IN
RCA IN
Digital connections (BEST)
DVD/Blu-ray player
Back of the soundbar
Remote control
RCA audio cable
AC adapter
SUBWOOFER OUT
OPTICAL IN
OUTPUT
1 Connect one end of the digital optical cable (not included)
to your soundbar. Connect the other end into the Digital
Optical Output port on your audio source device.
2 Change the device’s audio output to 'PCM' format
(typically found in Audio Settings). Refer to the
documentation that came with your audio source device
(e.g., TV, projector, DVD/Blu-ray player, etc.) for more
information.
•
Make sure that the electrical outlet matches the AC adapter’s input requirements of 100-240 V,
50/60 Hz before connecting.
DIGITAL
OPTICAL
•
•
Use only the AC adapter provided.
Plug in the AC adapter only after all other connections have been made.
DC IN
18V
R
L
AUX IN
DC IN
18V
R
L
AUX IN
RCA IN
SUBWOOFER OUT
OPTICAL IN
RCA IN
SUBWOOFER OUT
3.5 mm audio cable
Remote control
1 Connect the AC adapter to the DC IN jack on the back of the soundbar.
2 Plug the other end of the AC adapter into a power outlet or surge protector.
3 After connecting power, see USING YOUR SOUNDBAR on the
Digital optical cable (not included)
Wall mounting template
next page.
Back of the soundbar
Before using your new product, please read these
instructions to prevent any damage.
DC IN
18V
R
L
AUX IN
- OR -
RCA IN
SUBWOOFER OUT
OPTICAL IN
TV, projector, or
AUX IN connections (GOOD)
DVD/Blu-ray player
Back of the soundbar
1 Connect the right-angled end of the 3.5mm audio cable to
your soundbar. Plug the other end into the Audio Output
port or headphone jack on your audio source device.
OUTPUT
#
1
Item
Standby indicator
Description
Lights when the soundbar is in standby mode.
#
Item
Description
AUDIO
10 RCA IN (R and L) jacks
If your TV (or other audio source device) has RCA OUT jacks,
connect the RCA cables to your source device and these jacks.
DC IN
18V
R
L
AUX IN
2
3
4
(Power) button
and indicator
Press to turn on the soundbar. The indicator lights green.
Press again to return the soundbar to standby mode.
RCA
2 After connecting power, see USING YOUR SOUNDBAR on
SUBWOOFER OUT
OPTICAL IN
11 AUX IN jack
If your TV (or other audio source device) has an AUX OUT or
headphone jack, connect the 3.5 mm audio cable to your
source device and this jack.
the next page.
POSITION YOUR SOUNDBAR
You can mount your soundbar on the wall
(go to Step 5).
4
(Input) button
Press repeatedly to cycle through the sound source options
(RCA>AUX IN>OPTICAL IN).
You can set the soundbar on a flat surface
(go to Step 6).
12 OPTICAL IN jack
If your TV (or other audio source device) has an Optical OUT
jack, connect a digital optical cable (not included) to your
source device and this jack.
DSP (Digital Signal
Processor) button and
indicator
Press repeatedly to cycle through the DSP sound modes:
• Standard - Lets you enjoy normal sound.
• Theater - Best for enjoying movies. Bass frequencies
are enhanced.
3.5 mm audio cable (included)
- OR -
- OR -
TV, projector, or
DVD/Blu-ray player
13
14
(Power) button
Press to turn on the soundbar. Press again to return the
soundbar to standby mode.
Press repeatedly to cycle through the sound source options
(RCA>AUX IN>OPTICAL IN).
Press repeatedly to cycle through the DSP sound modes
(Standard>Theater >News ). The corresponding indicator on
the soundbar top panel lights to indicate the sound mode
selected.
Back of the soundbar
• News - Select for clear voice reproduction.
The corresponding indicator lights to indicate the sound
mode selected.
RCA Audio connections (GOOD)
INPUT button
OUTPUT
1 For an RCA audio connection, connect the right-angled
connectors to your soundbar. Connect the other end of the
RCA cables into the Audio Output ports on your audio
source device.
AUDIO
DC I
18
R
L
X IN
R
L
15 DSP buttons
RCA IN
Press to activate the bass frequency enhancement. The
indicator lights green. Press again to turn off the bass
frequency enhancement.
5
BASS button and indicator
SUBWOOFER OT
OPTICAL IN
2 After connecting power, see USING YOUR SOUNDBAR on
Press to increase or decrease the volume of the soundbar.
6
7
VOL +/– buttons
the next page.
16 BASS button
Press to activate the bass frequency enhancement.
Use to hang the soundbar on a wall.
Hanging brackets
NOTE: Make sure the cable ends match the color of the ports.
17 VOL +/– buttons
Press to increase or decrease the volume of the soundbar.
Connect a powered subwoofer to this jack.
8
9
SUBWOOFER OUT jack
DC IN jack
RCA audio cable (included)
18
(Mute) button
Press to mute the sound from the soundbar. Press again to
restore the sound.
Connect the AC adapter to this jack to power the soundbar.
OVER
Download from Www.Somanuals.com. All Manuals Search And Download.
|