ELECTRONIC WEIGHING INSTRUMENTS
OPERATOR’S MANUAL
MODEL NO. PS2R1-P
32 oz./1000 g capacity
™
Envelopes/Small Packages
Please take a few minutes to read this Operator’s manual so that you can become
acquainted with the proper usage and special features of your PELOUZE® DIGITAL SCALE.
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press COUNT. Display will show “Ad 10”. Add 10 like pieces, weighing a minimum of 1 oz**. Display will
show “Pr. C”.
3. Press COUNT. Display will show “10”. Add desired like pieces to be counted.
4. Display will show total pieces counted. Remove pieces counted.
5. Press ZERO. Display will show “0.0” indicating ounce mode.
Note: If pieces to be counted require a container, place empty container on platform before following steps 1
through 5.
** If pieces to be counted do not total at least 1 oz, you must add additional pieces in multiples of 10 until 1 oz or more is attained (e.g. 10, 20, 30
pieces). In order to arrive at the correct quantity, you must multiply the final piece count shown in step 4 by the number of multiples of 10 pieces
used in step 2.
AUTOMATIC OFF: When powered by a battery, the scale will automatically turn off after approximately 30
seconds of inactivity (no weight change). This prolongs Battery life.
To deactivate Automatic Turn Off: While scale is off, PRESS and HOLD ZERO. While still holding ZERO
press ON until “SHOF” appears briefly in display. This feature is automatically deactivated when the scale is
powered by a 120V adapter.
To reactivate Automatic Turn Off: PRESS OFF to turn off scale. Press ON again to turn the scale back on
and Automatic Off will be activated.
OVERLOAD WARNING: “
” appearing in the upper half of display indicates you have exceeded Scale
capacity.
LOW BATTERY WARNING: Blinking “
” appearing on display indicates low battery.
RATE CHANGE INSTRUCTIONS
You have the option of changing Rates by purchasing and replacing the rate chip (visit our website
www.pelouze.com or contact us at 1-888-807-2253) or by programming the new rates into the scale
yourself. To program the new rates, follow this procedure:
A
B
1. Initiate Program Mode. With the scale turned off, Press
and Hold the A key (see diagram at right) and Press and
Hold ON at the same time. The display will show
“
“ then “2162” or the current version code,
“USPS” and finally the 1 oz 1st Class postage rate (the last
digit blinking).
IMPORTANT: If “Err6” or “0” appear, STOP! The wrong two
buttons have been pressed. Turn Scale Off. Begin again.
2. Enter New Rate from Right to Left. As each digit blinks,
Press and Hold the B key to change it. Press D to move
left to the next digit. When the new rate is completely
entered, Press the C key to store in memory.
C
D
3. Complete Rate Changes. Repeat step 2 to enter all 1st Class rate changes up to 16 oz (use Priority Mail
postage rates for 13 oz to 16 oz rates) and then all Express Mail rate changes up to 32 oz. When you
complete the 32 oz Express Mail postage rate, “ACCP” will appear on the display, verifying acceptance of
the new rates.
4. Press OFF to turn scale off. Scale is now ready to resume normal use.
CARE & CLEANING
Your PS2R1-P is a precision instrument, engineered to give years of valuable service. Care should be given
to maintain its accuracy and appearance. PROTECT YOUR SCALE FROM:
• Being Dropped
• Shock Loading
• Excessive weight
• Extreme Temperatures
• Liquid Spills
• Other Abuses
This scale is easily cleaned by wiping with a damp, soft cloth and mild nonabrasive detergent.
SPECIFICATIONS
DIMENSIONS: 5" x 6 3/4” x 2 1/16"
PLATFORM SIZE: 4 3/4” x 4 1/8"
CAPACITY: 32 oz./1000g x 0.1 oz/1 g. MODEL NO.: PS2R1-P
POWER SOURCE: 9V Battery or Pelouze ADPT2 Adapter with 120V AC 60Hz 3W input/ 9V DC 100mA
Output
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
NOT LEGAL FOR TRADE
1 YEAR LIMITED WARRANTY
What does this Warranty Cover?
Pelstar LLC scales are warranted from date of purchase against defects of materials or in workmanship for a
period of 1 year. If product fails to function properly, return the product, prepaid and properly packed to Pelstar. If
manufacturer determines that a defect of material or in workmanship exists, customers' sole remedy will be repair
or replacement of scale at no charge. Replacement will be made with a new or remanufactured product or
component. If the product is no longer available, replacement may be made with a similar product of equal or greater
value. All parts including repaired and replaced parts are covered only for the original warranty period.
Who is Covered?
The original purchaser of the product must have proof of purchase to receive warranty service. Pelstar dealers
or retail stores selling Pelstar products do not have the right to alter, or modify or any way change the terms and
conditions of this warranty.
What is Excluded?
Your warranty does not cover obsolete dials or chips due to postal rate changes, normal wear of parts or damage
resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use
contrary to the operating instruction, abuse including tampering, damage in transit, or unauthorized repair or
alternations. Further, the warranty does not cover Acts of God, such as fire, flood, hurricanes and tornadoes. This
warranty gives you specific legal rights, and you may also have other rights that vary from state to state or province
to province or jurisdiction to jurisdiction.
To get Warranty Service
Make sure you keep your sales receipt or document showing proof of purchase.
Call 1 (800) 638-3722 to receive a return authorization. Attach proof of purchase to your defective product along
with your name, address,daytime telephone number and description of the problem. Carefully package the product
and send with shipping and insurance prepaid to:
Pelstar LLC
Attention: R/A# _________
Repair Department
7400 W. 100th Place
Bridgeview, IL 60455
If your scale is not covered by warranty, or has been damaged, an estimate of repair costs or replacement costs
will be provided to you for approval prior to servicing or replacing.
Technical Service/Returns: 800-638-3722
Customer Service: 800-654-8330
Postal Rate Increase: 888-807-2253
Pelstar LLC
Bridgeview, Illinois 60455
All rights reserved
Pelouze® is a registered trademark of Pelstar LLC
Made in China to our exact specifications
04.03
55440
Download from Www.Somanuals.com. All Manuals Search And Download.
|