Dukane Projector
8755J-RJ / 8919H-RJ / 8920H-RJ
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
WARNING ►Before using this product, please read all manuals for this
product. Be sure to read “Safety Guide” first. After reading them, store them in a
safe place for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are
described below.
WARNING This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
CAUTION This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
NOTICE
This entry notices of fear of causing trouble.
Please refer to the pages written following this symbol.
NOTE • The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
Trademark acknowledgment
• Mac® is a registered trademark of Apple Inc.
• Windows® is a registered trademark of Microsoft Corporation in the U.S. and/or
other countries.
• VESA and DDC are trademarks of the Video Electronics Standard Association.
• Trademark PJLink is a trademark applied for trademark
rights in Japan, the United States of America and other
countries and areas.
All other trademarks are the properties of their respective owners.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Projector features / Preparations
Projector features
The projector provides you with the broad use by the following features.
ü This projector has a variety of I/O ports that supposedly cover for any
business scene.
ü This projector realizes the large projection image, even if in a small space.
ü The new double layer filter system is expected to function longer and offers
you less maintenance frequency.
ü This projector can be controlled and monitored via LAN connection.
ü This projector's network supports the PJLinkTM standard.
ü PJLinkTM is a unified standard for operating and controlling data projectors.
PJLinkTM enables central control of projectors manufactured by different
vendors and projectors can be operated by a controller. PJLinkTM compliant
equipment can be managed and controlled at any time and in any place,
regardless of manufacturer.
For the command of PJLinkTM, see "Technical".
For specifications of PJLinkTM, see the web site of the Japan Business
Machine and Information System Industries Association.
Preparations
Checking the contents of package
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
Your projector should come with the items
shown below. Check that all the items are
included. Require of your dealer immediately if
any items are missing.
(1)
(4)
(5)
ASPECT
AUTO SEARCH BLANK
M
A
G
N
I
F
Y
F
R
E
E
Z
E
PAGE
UP
VOLUME
ON
㧗
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
MENU
1
2
POSITION
ENTER
ESC
RESET
(1) Remote control with two AA batteries
(2) Power cord
(3) Computer cable
(4) Lens cover
(5) User’s manuals (Book x1, CD x1)
(6) Security label
(2)
(3)
(6)
NOTE • Keep the original packing materials, for future reshipment. Be sure
to use the original packing materials when moving the projector. Use special
caution for the lens.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Part names
Part names
Projector
(1)
HOT!
(2) (3) (4)
(1) Lamp cover (62)
The lamp unit is inside.
(2) Focus ring (19)
(3) Zoom ring (19)
(4) Control panel (5)
(5) Elevator buttons (x 2) (19)
(6) Elevator feet (x 2) (19)
(7) Remote sensor (13)
(8) Lens (67)
(11)
(7)
(5)
(6)
(8)
(9)
(6)
(10)
(6)
(6)
(9) Intake vents
(10) Filter cover (64)
The air filter and intake vent
are inside.
(11) Speaker (37)
(12) Exhaust vent
(11)
(12)
HOT!
(13) AC IN (AC inlet) (12)
(14) Rear panel (5)
(15) Security bar (12)
(16) Security slot (12)
(17) Slot cover (66)
The internal clock battery is
inside.
(4)
(14)
(1)
(17)
HOT!
(13)
(15)
(16)
(14)
(12)
HOT!
WARNING ►HOT! : Do not touch around the lamp cover and the exhaust
vents during use or just after use, since it is too hot.
►Do not look into the lens or vents while the lamp is on, since the strong light is
not good for your eyes.
►Do not handle the elevator buttons without holding the projector, since the
projector may drop down.
CAUTION ►Maintain normal ventilation to prevent the projector from
heating up. Do not cover, block or plug up the vents. Do not place anything that
can stick or be sucked to the vents, around the intake vents. Clean the air filter
periodically.
►Do not use the security bar and slot to prevent the projector from falling down,
since it is not designed for it.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Part names
Control panel
(1) STANDBY/ON button (15)
(2) INPUT button (16, 23)
(3) MENU button (23)
(5) (6)
It consists of four cursor buttons.
(4) POWER indicator (12, 15, 69)
(5) TEMP indicator (69)
(6) LAMP indicator (69)
(1)
(2)
(3)
(4)
Rear panel (9, 10)
(1) AUDIO IN1 port
(2) AUDIO IN2 port
(9) COMPONENT
(Y, Cb/Pb, Cr/Pr) ports
(10) VIDEO port
(3) COMPUTER IN1 port
(4) COMPUTER IN2 port
(5) MONITOR OUT port
(6) Shutdown switch (70)
(7) CONTROL port (9, 10)
(8) USB port (14)
(11) S-VIDEO port
(12) AUDIO IN3 (R, L) ports
(13) AUDIO OUT (R, L) ports
(14) LAN port (10)
(15) Battery slot (66)
(5) (6)
(4) (2) (1) (14) (3)
LAN
(15)
(11)
(10) (9) (12)
(13)
(8)
(7)
CAUTION ►Use the shutdown switch only when the projector is not
turned off by normal procedure, since pushing this switch stops operation of the
projector without cooling it down.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Part names
Remote control
(1) VIDEO button (17)
(2) COMPUTER button (17)
(3) SEARCH button (18)
(4) STANDBY/ON button (15)
(5) ASPECT button (18)
(6) AUTO button (20)
(2)
(1)
(6)
(5)
(16)
(8)
(9)
(19)
(17)
(20)
(22)
(10)
(4)
(3)
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT
AUTO SEARCH BLANK
(7)
MAGNIFY
FREEZE
PAGE
UP
VOLUME
(12)
(14)
(11)
(13)
(15)
(18)
(21)
(23)
(25)
㧗
ON
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
MENU
1
2
(7) BLANK button (22)
(8) MAGNIFY - ON button (21)
(9) MAGNIFY - OFF button (14, 21)
(10) MY SOURCE/DOC.CAMERA button (17, 45)
(11) VOLUME - button (14, 16)
(12) PAGE UP button (14)
(13) PAGE DOWN button (14)
(14) VOLUME + button (16)
(15) MUTE button (16)
POSITION
ENTER
ESC
RESET
(24)
(16) FREEZE button (22)
(17) MY BUTTON - 1 button (45)
(18) MY BUTTON - 2 button (45)
(19) KEYSTONE button (21)
(20) POSITION button (20, 21, 24)
(21) MENU button (23)
(22) ▲/▼/◄/► cursor buttons (14, 23)
(23) ENTER button (14, 23)
(24) ESC button (14, 23)
(26)
(25) RESET button (14, 23)
(26) Battery cover (13)
Back of
the remote control
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up
Setting up
Install the projector according to the environment and manner the projector will be
used in.
Arrangement
Refer to the illustrations and tables below to determine screen size and projection
distance.
The values shown in the table are calculated for a full size screen: 1024 x 768
a Screen size (diagonal)
b Projection distance (±10%)
c1 , c2 Screen height (±10%)
On a horizontal surface
Suspended from the ceiling
• Keep a space of 30 cm or more between the
sides of the projector and other objects such
as walls.
• For the case of installation in a special
state such as ceiling mount, the specified
mounting accessories (74) and service may
be required. Before installing the projector,
consult your dealer about your installation.
4 : 3 screen
16 : 9 screen
a
b
Projection distance
min. max.
b
c1
Screen
height
c2
Screen
height
c1
Screen
height
c2
Screen
height
Screen size
(diagonal)
Projection distance
min.
max.
type
(inch)
m
m
inch
m
inch cm inch cm inch
m
inch
m
inch cm inch cm inch
30 0.8 0.9 34 1.0 41
40 1.0 1.2 46 1.4 55
50 1.3 1.5 58 1.8 69
60 1.5 1.8 70 2.1 83
70 1.8 2.1 82 2.5 97
41
55
69
82
96
16
22
27
32
38
5
2
2
3
4
4
5
5
6
7
9
1.0 38 1.1 45
1.3 51 1.5 60
1.6 64 1.9 76
1.9 77 2.3 91
39
51
64
77
15
20
25
30
35
-1
-2
-2
-2
-3
-3
-4
-4
-5
-6
0
6
-1
-1
-1
-1
-1
-1
-2
-2
-2
-3
-4
-5
8
9
11
12
14
15
18
23
2.3 89 2.7 106 90
80 2.0 2.4 94 2.8 112 110 43
90 2.3 2.7 106 3.2 126 123 49
100 2.5 3.0 118 3.6 140 137 54
120 3.0 3.6 142 4.3 168 165 65
150 3.8 4.5 177 5.3 211 206 81
2.6 102 3.1 122 103 41
2.9 115 3.5 137 116 46
3.3 128 3.9 153 129 51
3.9 154 4.7 183 154 61
4.9 193 5.8 229 193 76
200 5.1 6.0 237 7.1 281 274 108 30
250 6.4 7.5 297 8.9 352 343 135 38
300 7.6 9.0 356 10.7 422 411 162 46
12 6.6 258 7.8 306 257 101 -8
15 8.2 323 9.7 383 322 127 -10
18 9.9 388 11.7 460 386 152 -12
(continued on next page)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up
Arrangement (continued)
WARNING ►Place the projector in a stable horizontal position. If the
projector falls or is knocked over, it could cause injury and/or damage to the
projector. Using a damaged projector could then result in fire and/or electric
shock.
• Do not place the projector on an unstable, slanted or vibrational surface such
as a wobbly or inclined stand.
• Do not place the projector on its side, front or rear position.
• Consult with your dealer before a special installation such as suspending from
a ceiling or somewhere else.
►Place the projector in a cool place, and ensure that there is sufficient
ventilation. The high temperature of the projector could cause fire, burns and/or
malfunction of the projector.
• Do not stop-up, block or otherwise cover the projector's vents.
• Keep a space of 30 cm or more between the sides of the projector and other
objects such as walls.
• Do not place the projector on metallic thing or anything weak in heat.
• Do not place the projector on carpet, cushions or bedding.
• Do not place the projector in direct sunlight or near hot objects such as heaters.
• Do not place anything near the projector lens or vents, or on top of the
projector.
• Do not place anything that may be sucked into or stick to the vents on the
bottom of the projector. This projector has some intake vents also on the
bottom.
►Do not place the projector anyplace where it may get wet. Getting the projector
wet or inserting liquid into the projector could cause fire, electric shock and/or
malfunction of the projector.
• Do not place the projector in a bathroom or the outdoors.
• Do not place anything containing liquid near the projector.
►Use only the mounting accessories the manufacturer specified, and leave
installing and removing the projector with the mounting accessories to the
service personnel.
• Read and keep the user’s manual of the mounting accessories used.
CAUTION ►Avoid placing the projector in smoky, humid or dusty place.
Placing the projector in such places could cause fire, electric shock and/or
malfunction of the projector.
• Do not place the projector near humidifiers, smoking spaces or a kitchen.
►Position the projector to prevent light from directly hitting the projector's remote
sensor.
►Do not place the product in a place where radio interference may be caused.
►Do not place this product in a magnetic field.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up
Connecting your devices
Be sure to read the manuals for devices before connecting them to the projector.
Make sure that all the devices are suitable to be connected with this product, and
prepare the cables required to connect. Please refer to the following illustrations
to connect them.
Monitor
Computer
RGB IN
AUDIO OUT
RGB OUT
RS-232C
AUDIO OUT
RGB OUT
USB
LAN
BATTERY
Speakers
(with an
amplifier)
Y
CB/PB CR/PR
L
R
L
R
L
R
VIDEO OUT
S-VIDEO OUT
AUDIO OUT
AUDIO OUT
AUDIO OUT
COMPONENT VIDEO OUT
L
R
AUDIO IN
VCR/DVD player
(continued on next page)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up
Connecting your devices (continued)
To use network functions of the projector, connect the LAN port to the computer's
LAN port.
To use NETWORK BRIDGE function, also connect the CONTROL port and an
RS-232C port of the external device to communicate as a network terminal.
See the User's Manual - Network Guide for details of network functions.
Computer
External device
LAN
RS-232C
LN
BATTERY
WARNING ►Do not disassemble or modify the projector and accessories.
►Be careful not to damage the cables, and do not use damaged cables.
CAUTION ►Turn off all devices and unplug their power cords prior to
connecting them to projector. Connecting a live device to the projector may
generate extremely loud noises or other abnormalities that may result in
malfunction or damage to the device and the projector.
►Use appropriate accessory or designated cables. Ask your dealer about non-
accessory cables which may be required a specific length or a ferrite core by
the regulations. For cables with a core only at one end, connect the end with
the core to the projector.
►Make sure that devices are connected to the correct ports. An incorrect
connection may result in malfunction or damage to the device and the projector.
►Be sure to consult the administrator of the network. Do not connect LAN port
to any network that might have the excessive voltage.
NOTICE
►Use the cables with straight plugs, not L-shaped ones, as the
input ports of the projector are recessed.
(continued on next page)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up
Connecting your devices (continued)
NOTE
• Be sure to read the manuals for devices before connecting them to
the projector, and make sure that all the devices are suitable to be connected
with this product. Before connecting to a computer, check the signal level, the
signal timing, and the resolution.
- Be sure to consult to the administrator of the network. Do not connect LAN
port to any network that might have excessive voltage.
- Some signal may need an adapter to input this projector.
- Some computers have multiple screen display modes that may include some
signals which are not supported by this projector.
- Although the projector can display signals with resolution up to UXGA
(1600X1200), the signal will be converted to the projector’s panel resolution
before being displayed. The best display performance will be achieved if the
resolutions of the input signal and the projector panel are identical.
•
While connecting, make sure that the shape of the cable's connector fits the port
to connect with. And be sure to tighten the screws on connectors with screws.
• When connecting a laptop PC to the projector, be sure to activate the PC's
external RGB output. (Set the laptop PC to CRT display or to simultaneous
LCD and CRT display.) For details on how this is done, please refer to the
instruction manual of the corresponding laptop PC.
•
When the picture resolution is changed on a computer depending on an input,
automatic adjustment function may take some time and may not be completed. In
this case, you may not be able to see a check box to select “Yes/No” for the new
resolution on Windows. Then the resolution will go back to the original. It might
be recommended to use other CRT or LCD monitors to change the resolution.
• In some cases, this projector may not display a proper picture or display
any picture on screen. For example, automatic adjustment may not function
correctly with some input signals. An input signal of composite sync or sync on
G may confuse this projector, so the projector may not display a proper picture.
About Plug-and-Play capability
Plug-and-Play is a system composed of a computer, its operating system
and peripheral equipment (i.e. display devices). This projector is VESA DDC
2B compatible. Plug-and-Play can be used by connecting this projector to a
computer that is VESA DDC (display data channel) compatible.
• Take advantage of this feature by connecting a computer cable to the
COMPUTER IN1 port (DDC 2B compatible). Plug-and-Play may not work
properly if any other type of connection is attempted.
• Please use the standard drivers in your computer as this projector is a Plug-
and-Play monitor.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up
Connecting power supply
Put the connector of the power cord into the
AC IN (AC inlet) of the projector.
1.
Firmly plug the power cord’s plug into the
outlet. In a couple of seconds after the
power supply connection, the POWER
2.
indicator will light up in steady orange.
Please remember that when the DIRECT ON function
activated (43), the connection of the power supply
make the projector turn on.
AC IN
Power cord
WARNING ►Please use extra caution when connecting the power cord, as
incorrect or faulty connections may result in fire and/or electrical shock.
• Only use the power cord that came with the projector. If it is damaged, consult
your dealer to get a new one.
• Only plug the power cord into an outlet whose voltage is matched to the power
cord. The power outlet should be close to the projector and easily accessible.
Remove the power cord for complete separation.
• Never modify the power cord.
Using the security bar and slot
Security slot
A commercial anti-theft chain or wire up to
10 mm in diameter can be attached to the
security bar on the projector.
Also this product has the security slot for
the Kensington lock.
For details, see the manual of the security
tool.
Security bar
Anti-theft chain or wire
WARNING ►Do not use the security bar and slot to prevent the projector
from falling down, since it is not designed for it.
CAUTION ►Do not place anti-theft chain or wire near the exhaust vents. It
may become too hot.
NOTE • The security bar and slot is not comprehensive theft prevention
measures. It is intended to be used as supplemental theft prevention measure.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
Remote control
Installing the batteries
Please insert the batteries into the remote control before using it. If the remote control
starts to malfunction, try to replace the batteries. If you will not use the remote control for
long period, remove the batteries from the remote control and store them in a safe place.
Holding the hook part of the battery
cover, remove it.
1
2
3
1.
2.
Align and insert the two AA batteries
(HITACHI MAXELL, Part No.LR6 or R6P)
according to their plus and minus terminals
as indicated in the remote control.
3. Replace the battery cover in the direction of the arrow and snap it back into place.
WARNING ►Always handle the batteries with care and use them only as
directed. Improper use may result in battery explosion, cracking or leakage,
which could result in fire, injury and/or pollution of the surrounding environment.
• Be sure to use only the batteries specified. Do not use batteries of different
types at the same time. Do not mix a new battery with used one.
•
Make sure the plus and minus terminals are correctly aligned when loading a battery.
• Keep a battery away from children and pets.
• Do not recharge, short circuit, solder or disassemble a battery.
•
Do not place a battery in a fire or water. Keep batteries in a dark, cool and dry place.
• If you observe battery leakage, wipe out the leakage and then replace a battery.
If the leakage adheres to your body or clothes, rinse well with water immediately.
• Obey the local laws on disposing the battery.
About the remote control signal
The remote control works with the projector’s remote
sensor. This projector has a remote sensor on the front.
The sensor senses the signal within the following range
when the sensor is active:
Approx.
3 m
30º
30º
60 degrees (30 degrees to the left and right of the sensor)
within 3 meters about.
NOTE • The remote control signal reflected in the screen or the like may be available.
If it is difficult to send the signal to the sensor directly, attempt to make the signal reflect.
• The remote control uses infrared light to send signals to the projector (Class 1
LED), so be sure to use the remote control in an area free from obstacles that
could block the remote control’s signal to the projector.
•
The remote control may not work correctly if strong light (such as direct sun
light) or light from an extremely close range (such as from an inverter fluorescent
lamp) shines on the remote sensor of the projector. Adjust the position of
projector avoiding those lights.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
Changing the frequency of remote control signal
The accessory remote control has the two choices on signal
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
frequency Mode 1:NORMAL and Mode 2:HIGH. If the remote control
does not function properly, attempt to change the signal frequency.
In order to set the Mode, please keep pressing the combination of
two buttons listed below simultaneously for about 3 seconds.
ASPECT
AUTO SEARCH BLANK
FREEZE
PAGE
UP
VOLUME
MAGNIFY
㧗
ON
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
MENU
1
2
(2)
(1)
(1) Set to Mode 1:NORMAL... VOLUME - and RESET buttons
(2) Set to Mode 2:HIGH... MAGNIFY OFF and ESC buttons
POSITION
ENTER
Please remember that the REMOTE FREQ. in the SERVICE item of
ESC
RESET
the OPTION menu
(47) of the projector to be controlled should be
set to the same mode as the remote control.
Using as a simple PC mouse & keyboard
The accessory remote control works as a simple mouse
and keyboard of the computer, when the projector's
USB port (B type) connects with the computer's USB
port (A type) port via a mouse cable.
(1) PAGE UP key: Press PAGE UP button.
(2) PAGE DOWN key: Press PAGE DOWN button.
(3) Mouse left button: Press ENTER button.
(4) Move pointer: Use the cursor buttons ▲, ▼, ◄ and ►.
(5) ESC key: Press ESC button.
(6) Mouse right button: Press RESET button.
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT
AUTO SEARCH BLANK
(1)
(2)
USB port
FREEZE
PAGE
UP
VOLUME
MAGNIFY
㧗
ON
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
MENU
1
2
WARNING ►Improper use of the simple mouse &
keyboard function could damage your equipment. While
using this function, please connect this product only to
a computer. Be sure to check your computer’s manuals
before connecting this product to the computer.
POSITION
(3)
(5)
(4)
(6)
ENTER
ESC
RESET
NOTE • When the simple mouse & keyboard function of this product does not
work correctly, please check the following.
- When a USB cable connects this projector with a computer having a built-in
pointing device (e.g. track ball) like a laptop PC, open BIOS setup menu, then
select the external mouse and disable the built-in pointing device, because the
built-in pointing device may have priority to this function.
-
Windows 95 OSR 2.1 or higher is required for this function. And also this function may
not work depending on the computer’s configurations and mouse drivers. This function
can work with the computer which can operate general USB mouse or keyboard.
- You cannot do things like press two buttons at once (for instance, pressing
two buttons at the same time to move the mouse pointer diagonally).
- This function is activated only when the projector is working properly. This function
is not available while the lamp is warming up (the POWER indicator blinks green),
and while adjusting the volume and display, correcting for keystone, zooming in on
the screen, using the BLANK function, or displaying the menu screen.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Power on/off
Power on/off
STANDBY/ON button
POWER indicator
Turning on the power
Make sure that the power cord is firmly and
1.
correctly connected to the projector and the
outlet.
Make sure that the POWER indicator is
steady orange (69). Then remove the lens
cover.
2.
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT
AUTO SEARCH BLANK
MAGNIFY FREEZE
ON
PAGE
UP
VOLUME
㧗
DOWN
OFF
Press STANDBY/ON button on the
projector or the remote control.
The projection lamp will light up and POWER
KEYSTONE
MY BUTTON
MUTE
MENU
1
2
3.
POSITION
ENTER
ESC
RESET
indicator will begin blinking in green. When the power
is completely on, the indicator will stop blinking and light in steady green
(69).
To display the picture, select an input signal according to the section “Selecting an
input signal” (16).
Turning off the power
Press the STANDBY/ON button on the projector or the remote control. The
message “Power off?” will appear on the screen for about 5 seconds.
Press the STANDBY/ON button again while the message appears.
The projector lamp will go off, and the POWER indicator will begin blinking in
orange. Then POWER indicator will stop blinking and light in steady orange
when the lamp cooling is complete (69).
1.
2.
3. Attach the lens cover, after the POWER indicator turns in steady orange.
Do not turn the projector on for about 10 minutes or more after turning it off.
Turning the projector on again too soon could shorten the lifetime of some
consumable parts of the projector.
WARNING ►A strong light is emitted when the projector’s power is on. Do
not look into the lens of the projector or look inside of the projector through any
of the projector’s openings.
►Do not touch around the lamp cover and the exhaust vents during use or just
after use, since it is too hot.
NOTE • Turn the power on/off in right order. Please power on the projector
prior to the connected devices.
•
This projector has the function that can make the projector automatically turn on/
off. Please refer to the DIRECT ON (43) and AUTO OFF (44) items of the
OPTION menu.
• Use the shutdown switch (70) only when the projector is not turned off by
normal procedure.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating
Operating
VOLUME +/- button
Adjusting the volume
Use the VOLUME +/VOLUME - buttons to adjust the volume.
A dialog will appear on the screen to aid you in adjusting the
volume. If you do not do anything, the dialog will automatically
disappear after a few seconds.
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
1.
ASPECT
AUTO SEARCH BLANK
MAGNIFY
FREEZE
PAGE
UP
VOLUME
㧗
ON
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
MENU
● When is selected for current picture input port, the volume
adjustment is disabled. Please see AUDIO SOURCE item of
AUDIO menu (37).
1
2
POSITION
● When the projector is in the standby mode, the volume can be
adjusted if is not selected for the AUDIO OUT STANDBY and NORMAL is
selected to the STANDBY MODE in the SETUP menu (36).
Temporarily muting the sound
MUTE button
Press MUTE button on the remote control.
1.
MY SOURCE/
A dialog will appear on the screen indicating that you have
VIDEO COMPUTER DOC.CAMERA
ASPECT
AUTO SEARCH BLANK
muted the sound.
FREEZE
PAGE
UP
VOLUME
MAGNIFY
To restore the sound, press the MUTE, VOLUME + or
VOLUME - button. Even if you do not do anything, the dialog
will automatically disappear after a few seconds.
㧗
ON
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
MENU
1
2
● When is selected for current picture input port, the sound
is always muted. Please see AUDIO SOURCE item of
AUDIO menu (37).
POSITION
● C.C. (Closed Caption) is automatically activated when sound is muted and an
input signal containing C.C is received. This function is available only when
the signal is NTSC for VIDEO or S-VIDEO, or 480i@60 for COMPONENT,
COMPUTER IN1 or COMPUTER IN2, and when AUTO is selected for
DISPLAY in the C.C. menu under the SCREEN menu (42).
Selecting an input signal
Press INPUT button on the projector.
INPUT button
1.
Each time you press the button, the projector switches its
input port from the current port as below.
COMPUTER IN 1 COMPUTER IN 2
VIDEO
S-VIDEO
COMPONENT (Y, Cb/Pb, Cr/Pr)
● While ON is selected for AUTO SEARCH item in OPTION
menu (43), the projector will keep checking the ports in
above order repeatedly till an input signal is detected.
(continued on next page)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating
Selecting an input signal (continued)
COMPUTER button
Press COMPUTER button on the remote control.
Each time you press the button, the projector switches its
input port from the current port as below.
1.
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT
AUTO SEARCH BLANK
COMPUTER IN 1 COMPUTER IN 2
FREEZE
PAGE
UP
VOLUME
MAGNIFY
㧗
ON
DOWN
OFF
● While ON is selected for AUTO SEARCH item in OPTION
menu, the projector will keep checking every port sequentially
till an input signal is detected (43). If COMPUTER button
is pressed when VIDEO, S-VIDEO or COMPONENT port is
selected, the projector will check COMPUTER IN1 port first.
KEYSTONE
MY BUTTON
MUTE
MENU
1
2
POSITION
Press VIDEO button on the remote control.
Each time you press the button, the projector switches its
input port from the current port as below.
VIDEO button
1.
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT
AUTO SEARCH BLANK
COMPONENT (Y, Cb/Pb, Cr/Pr) S-VIDEO VIDEO
FREEZE
PAGE
UP
VOLUME
MAGNIFY
㧗
ON
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
MENU
●
While ON is selected for AUTO SEARCH item in OPTION
menu, the projector will keep checking every port sequentially
till an input signal is detected (43). If VIDEO button is
pressed when COMPUTER IN1 or COMPUTER IN2 port is
selected, the projector will check COMPONENT port first.
1
2
POSITION
Press the MY SOURCE / DOC. CAMERA button on
the remote control. The input signal will be changed
into the signal you set as MY SOURCE (45).
MY SOURCE /
1.
DOC. CAMERA button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
● This function also can use for document camera. Select the
input port that connected the document camera.
ASPECT
AUTO SEARCH BLANK
FREEZE
PAGE
UP
VOLUME
MAGNIFY
㧗
ON
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
MENU
1
2
POSITION
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating
Searching an input signal
SEARCH button
Press SEARCH button on the remote control.
The projector will start to check its input ports as below in
order to find any input signals.
MY SOURCE/
1.
VIDEO COMPUTER DOC.CAMERA
ASPECT
AUTO SEARCH BLANK
MAGNIFY
FREEZE
PAGE
UP
VOLUME
㧗
ON
When an input is found, the projector will stop searching
and display the image. If no signal is found, the projector will
return to the state selected before the operation.
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
MENU
1
2
POSITION
COMPUTER IN 1 COMPUTER IN 2
VIDEO
S-VIDEO
COMPONENT (Y, Cb/Pb, Cr/Pr)
● While ON is selected for AUTO SEARCH item in OPTION menu (43), the
projector will keep checking the ports in above order repeatedly till an input
signal is detected.
Selecting an aspect ratio
ASPECT button
Press ASPECT button on the remote control.
Each time you press the button, the projector switches the
mode for aspect ratio in turn.
1.
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT
AUTO SEARCH BLANK
FREEZE
PAGE
UP
VOLUME
MAGNIFY
For a computer signal
㧗
ON
DOWN
OFF
NORMAL 4:3 16:9 16:10
KEYSTONE
MY BUTTON
MUTE
MENU
1
2
POSITION
For a video signal, s-video signal or component video
signal
4:3 16:9 14:9
For no signal
4:3 (fixed)
● ASPECT button does not work when no proper signal is inputted.
● NORMAL mode keeps the original aspect ratio setting.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating
Adjusting the projector's elevator
When the place to put the projector is slightly uneven to the left or right, use the
elevator feet to place the projector horizontally.
Using the feet can also tilt the projector in order to project at
a suitable angle to the screen, elevating the front side of the
projector within 14 degrees.
14°
This projector has 2 elevator feet and 2 elevator buttons. An elevator foot is
adjustable while pushing the elevator button on the same side as it.
1. Holding the projector, push the elevator buttons to loose the elevator feet.
2. Position the front side of the projector to the desired height.
3. Release the elevator buttons in order to lock the elevator feet.
After making sure that the elevator feet are locked, put the projector down
gently.
4.
If necessary, the elevator feet can be manually twisted to make more precise
adjustments. Hold the projector when twisting the feet.
5.
1
5
To loose an elevator foot, push the
elevator button on the same side as it.
To finely adjust, twist the foot.
CAUTION ►Do not handle the elevator buttons without holding the
projector, since the projector may drop down.
►Do not tilt the projector other than elevating its front within 14 degrees using
the adjuster feet. A tilt of the projector exceeding the restriction could cause
malfunction or shortening the lifetime of consumables, or the projector itself.
Adjusting the zoom and focus
Zoom ring
1. Use the zoom ring to adjust the screen size.
2. Use the focus ring to focus the picture.
Focus ring
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating
Using the automatic adjustment feature
AUTO button
Press AUTO button on the remote control.
1.
Pressing this button performs the following.
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
For a computer signal
ASPECT
AUTO SEARCH BLANK
The vertical position, the horizontal position and the horizontal
phase will be automatically adjusted.
FREEZE
PAGE
UP
VOLUME
MAGNIFY
㧗
ON
DOWN
OFF
Make sure that the application window is set to its maximum size
prior to attempting to use this feature. A dark picture may still be
incorrectly adjusted. Use a bright picture when adjusting.
KEYSTONE
MY BUTTON
MUTE
MENU
1
2
POSITION
For a video signal and s-video signal
The video format best suited for the respective input signal will be selected
automatically. This function is available only when the AUTO is selected for
the VIDEO FORMAT item in the INPUT menu (33). The vertical position and
horizontal position will be automatically set to the default.
For a component video signal
The vertical position, horizontal position and horizontal phase will be
automatically set to the default.
● The automatic adjustment operation requires approx. 10 seconds. Also please
note that it may not function correctly with some input.
● When this function is performed for a video signal, a certain extra such as a line
may appear outside a picture.
● When this function is performed for a computer signal, a black frame may be
displayed on the edge of the screen, depending on the computer model.
●
The items adjusted by this function may vary when the FINE or DISABLE is selected
for the AUTO ADJUST item of the SERVICE item in the OPTION menu (46).
Adjusting the position
KEYSTONE
POSITION
MY BUTTON
1
MUTE
MENU
Press POSITION button on the remote control when no menu is
2
1.
indicated.
The “POSITION” indication will appear on the screen.
ENTER
Use the ▲/▼/◄/► cursor buttons to adjust the picture position.
When you want to reset the operation, press RESET button on
the remote control during the operation.
ESC
RESET
2.
To complete this operation, press POSITION button again. Even if
you do not do anything, the dialog will automatically disappear
POSITION button
after a few seconds.
●
When this function is performed on a video signal, s-video signal or component
video signal, some image such as an extra-line may appear at outside of the
picture.
● When this function is performed on a video signal, s-video signal or component
video signal, the range of this adjustment depends on OVER SCAN in IMAGE
menu (30) setting. It is not possible to adjust when OVER SCAN is set to 10.
● If POSITION button is pressed when a menu is indicated on screen, the displayed
picture does not move its position but the menu does.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating
KEYSTONE button
Correcting the keystone distortions
Press KEYSTONE button on the remote
control. A dialog will appear on the screen to
aid you in correcting the distortion.
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
1.
ASPECT
AUTO SEARCH BLANK
MAGNIFY
FREEZE
PAGE
UP
VOLUME
㧗
ON
Use the ▲/▼ cursor buttons to select AUTO or MANUAL
operation, and press the ► button to perform the following.
(1) AUTO executes automatic vertical keystone correction.
(2) MANUAL displays a dialog for keystone correction.
Use the ◄/► buttons for adjustment.
DOWN
OFF
2.
KEYSTONE
MY BUTTON
MUTE
1
2
To close the dialog and complete this operation, press
KEYSTONE button again. Even if you do not do anything, the
dialog will automatically disappear after a few seconds.
● The adjustable range of this function will vary among inputs. For some input, this
function may not work well.
● When V:INVERT or H&V:INVERT is selected to the MIRROR item in the SETUP
menu, if the projector screen is inclined or angled downward, automatic vertical
keystone correction may not work correctly.
● When the zoom adjustment is set to the TELE (telephoto focus), this function may
be excessive. This function should be used when the zoom adjustment is set to
the full WIDE (wide-angle focus) whenever possible.
● When the projector is placed on the level (about ±3°), the automatic keystone
distortion correction may not work.
● When the projector is inclined to near ±30 degree or over, this function may not
work well.
● This function will be unavailable when Transition Detector is on (59).
MAGNIFY
Using the magnify feature
ON/OFF button
Press the ON button of MAGNIFY on the remote control.
1.
The “MAGNIFY” indication will appear on the screen and the
projector will go into the MAGNIFY mode. When the ON button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT
AUTO SEARCH BLANK
of MAGNIFY is pressed first after the projector is started, the
picture will be zoomed twice. The indication will disappear in
several seconds with no operation.
MAGNIFY
FREEZE
PAGE
UP
VOLUME
㧗
ON
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
1
2
Use the ▲/▼ cursor buttons to adjust the zoom level.
To move the zoom area, press the POSITION button in the
MAGNIFY mode, then use the ▲/▼/◄/► cursor buttons to move the area. And
to finalize the zoom area, press the POSITION button again.
To exit from the MAGNIFY mode and restore the screen to normal, press the OFF
button of MAGNIFY on the remote control.
2.
● The projector automatically exits from the MAGNIFY mode when the input signal
is changed or when the display condition is changed.
● In the MAGNIFY mode, the keystone distortion condition may vary, it will be
restored when the projector exits from the MAGNIFY mode.
NOTE • The zoom level can be finely adjusted. Closely watch the screen to
find the level you want.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating
Temporarily freezing the screen
FREEZE button
Press the FREEZE button on the remote control.
The “FREEZE” indication will appear on the screen (however,
the indication will not appear when the OFF is selected for
the MESSAGE item in the SCREEN menu (40)), and the
projector will go into the FREEZE mode, which the picture is
frozen.
1.
MY SOURCE/
COMPUTER
VIDEO
DOC.CAMERA
ASPECT
AUTO SEARCH BLANK
FREEZE
PAGE
UP
VOLUME
MAGNIFY
㧗
ON
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
1
2
To exit the FREEZE mode and restore the screen to normal,
press the FREEZE button again.
● The projector automatically exits from the FREEZE mode when some control
buttons are pressed.
● If the projector continues projecting a still image for a long time, the LCD
panel might possibly be burned in. Do not leave the projector in the FREEZE
mode for too long.
● Images might appear degraded when this function is operated, but it is not a
malfunction.
Temporarily blanking the screen
BLANK button
Press BLANK button on the remote control.
1.
The BLANK screen will be displayed instead of the screen of
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
input signal. Please refer to BLANK item in SCREEN menu
ASPECT
AUTO SEARCH BLANK
(38).
FREEZE
PAGE
UP
VOLUME
MAGNIFY
㧗
ON
To exit from the BLANK screen and return to the input signal
DOWN
OFF
screen, press BLANK button again.
KEYSTONE
MY BUTTON
MUTE
1
2
● The projector automatically exits from the BLANK mode when
some control buttons are pressed.
NOTE • The sound is not connected with the BLANK screen function. If
necessary, set the volume or mute first. To display the BLANK screen and mute
the sound at one time, use AV MUTE function (45).
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating
Using the menu function
This projector has the following menus:
PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK,
SECURITY and EASY MENU.
EASY MENU consists of functions often used, and the other menus are classified
into each purpose and brought together as the ADVANCED MENU.
Each of these menus is operated using the same methods. While the projector
is displaying any menu, the MENU button on the projector works as the cursor
buttons. The basic operations of these menus are as follows.
INPUT button
ENTER button
MENU button
Cursor buttons
MENU
POSITION
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT
AUTO SEARCH BLANK
M
A
G
N
I
F
Y
F
R
E
E
Z
E
PAGE
UP
VOLUME
ON
㧗
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
MENU
ENTER
1
2
POSITION
ENTER
RESET
ESC
RESET
ESC
MENU button
(Cursor buttons)
ESC button
RESET button
To start the MENU, press the MENU button. The MENU you last used (EASY
or ADVANCED) will appear. EASY MENU has priority to appear just after
powered on.
1.
2. In the EASY MENU
(1) Use the ▲/▼ cursor buttons to select an item to
operate. If you want to change it to the ADVANCED
MENU, select the ADVANCED MENU.
(2) Use the ◄/► cursor buttons to operate the item.
In the ADVANCED MENU
(1) Use the ▲/▼ cursor buttons to select a menu.
If you want to change it to the EASY MENU,
select the EASY MENU.
The items in the menu appear on the right side.
(2) Press the ► cursor button or ENTER button to
move the cursor to the right side. Then use the
▲/▼ cursor buttons to select an item to operate and press the ► cursor
button or ENTER button to progress. The operation menu or dialog of the
selected item will appear.
(3) Use the buttons as instructed in the OSD to operate the item.
(continued on next page)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating
Using the menu function (continued)
To close the MENU, press the MENU button again or select EXIT and press
the ◄ cursor button or ENTER button. Even if you do not do anything, the
dialog will automatically disappear after about 30 seconds.
3.
●
If you want to move the menu position, use the cursor buttons after pressing the
POSITION button.
● Some functions cannot be performed when a certain input port is selected, or
when a certain input signal is displayed.
● When you want to reset the operation, press RESET button on the remote
control during the operation. Note that some items (ex. LANGUAGE, VOLUME)
cannot be reset.
● In the ADVANCED MENU, when you want to return to the previous display,
press the ◄ cursor button or ESC button on the remote control.
Indication in OSD (On Screen Display)
The meanings of the general words on the OSD are as follows.
Indication
EXIT
Meaning
Selecting this word finishes the OSD menu. It's the same as
pressing the MENU button.
RETURN
Selecting this word returns the menu to the previous menu.
Selecting this word cancels the operation in the present
menu and returns to the previous menu.
CANCEL or NO
Selecting this word executes the prepared function or shifts
the menu to the next menu.
OK or YES
24
Download from Www.Somanuals.com. All Manuals Search And Download.
EASY MENU
EASY MENU
From the EASY MENU, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons. Then
perform it according to the following table.
Item
Description
Using the ◄/► buttons switches the mode for aspect ratio.
ASPECT
See the ASPECT item in IMAGE menu ( 30).
Using the ► button executes the auto keystone function.
See the AUTO KEYSTONE EXECUTE item in SETUP menu
AUTO KEYSTONE
EXECUTE
(
35).
Using the ◄/► buttons corrects the vertical keystone distortion.
KEYSTONE
See the KEYSTONE item in SETUP menu ( 35).
Using the ◄/► buttons switches the picture mode.
The picture modes are combinations of GAMMA and COLOR TEMP
settings. Choose a suitable mode according to the projected source.
NORMAL
CINEMA
DYNAMIC
BOARD(BLACK)
ó
ó
ó
DAYTIME
WHITEBOARD
BOARD(GREEN)
ó
ó
GAMMA
COLOR TEMP
2 MID
3 LOW
NORMAL
CINEMA
1 DEFAULT
2 DEFAULT
3 DEFAULT
4 DEFAULT
4 DEFAULT
5 DEFAULT
6 DEFAULT
DYNAMIC
1 HIGH
PICTURE MODE
BOARD(BLACK)
BOARD(GREEN)
WHITEBOARD
DAYTIME
4 Hi-BRIGHT-1
5 Hi-BRIGHT-2
2 MID
6 Hi-BRIGHT-3
• When the combination of GAMMA and COLOR TEMP differs
from pre-assigned modes above, the display on the menu for the
PICTURE MODE is “CUSTOM”. Please refer to the GAMMA and
COLOR TEMP ( 27, 28) items in PICTURE menu.
• Lines or other noise might appear on the screen when this function
is operated, but it is not a malfunction.
(continued on next page)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
EASY MENU
Item
Description
Using the ◄/► buttons turns off/on the eco mode.
ECO MODE
See the ECO MODE item in SETUP menu ( 35).
Using the ◄/► buttons switches the mode for mirror status.
MIRROR
RESET
See the MIRROR item in SETUP menu ( 36).
Performing this item resets all of the EASY MENU items except the
FILTER TIME and LANGUAGE.
A dialog is displayed for confirmation. Selecting the OK using the
button performs resetting.
►
The usage time of the air filter is shown in the menu.
Performing this item resets the filter time which counts usage time
of the air filter.
FILTER TIME
LANGUAGE
A dialog is displayed for confirmation. Selecting the OK using the
button performs resetting.
►
See the FILTER TIME item in OPTION menu ( 44).
Using the ◄/► buttons changes the display language.
See the LANGUAGE item in SCREEN menu
(
38).
Press the
►
or ENTER button to use the menu of PICTURE,
ADVANCED MENU IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK or
SECURITY.
EXIT
Press the ◄ or ENTER button to finish the OSD menu.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE menu
PICTURE menu
From the PICTURE menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item
Description
Using the ◄/► buttons adjusts the brightness.
Dark Light
BRIGHTNESS
ó
Using the ◄/► buttons adjusts the contrast.
Weak Strong
CONTRAST
ó
Using the ▲/▼ buttons switches the gamma mode.
1 DEFAULT
6 CUSTOM
6 DEFAULT
1 CUSTOM
2 DEFAULT
2 CUSTOM
3 DEFAULT
3 CUSTOM
4 DEFAULT
5 CUSTOM
5 DEFAULT
4 CUSTOM
To adjust CUSTOM
Selecting a mode whose name includes CUSTOM and then
pressing the ► button or the ENTER button displays a dialog to aid
you in adjusting the mode.
This function is useful when you want to
change the brightness of particular tones.
Choose an item using the ◄/► buttons,
and adjust the level using the ▲/▼ buttons.
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER button.
Each time you press the ENTER button, the
pattern changes as below.
GAMMA
No pattern Gray scale of 9 steps
ð
Ramp Gray scale of 15 steps
The eight equalizing bars correspond to eight tone levels of the test
pattern (Gray scale of 9 steps) except the darkest in the left end.
If you want to adjust the 2nd tone from left end on the test pattern,
use the equalizing adjustment bar “1”. The darkest tone at the left
end of the test pattern cannot be controlled with any of equalizing
adjustment bar.
• Lines or other noise might appear on the
screen when this function is operated, but it
is not a malfunction.
(continued on next page)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE menu
Item
Description
Using the ▲/▼ buttons switches the color temperature mode.
1 HIGH
1 CUSTOM
2 MID
2 CUSTOM
6 CUSTOM
3 LOW
6 Hi-BRIGHT-3
5 CUSTOM
3 CUSTOM
5 Hi-BRIGHT-2
4 CUSTOM
4 Hi-BRIGHT-1
To adjust CUSTOM
Selecting a mode whose name
includes CUSTOM and then pressing
the ► button or the ENTER button
displays a dialog to aid you in adjusting
the OFFSET and GAIN of the selected
mode.
COLOR TEMP
OFFSET adjustments change the color intensity
on the whole tones of the test pattern.
GAIN adjustments mainly affect color intensity
on the brighter tones of the test pattern.
Choose an item using the ◄/► buttons, and adjust the level using
the ▲/▼ buttons.
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER button.
Each time you press the ENTER button, the pattern changes as
below.
No pattern Gray scale of 9 steps
ð
Ramp Gray scale of 15 steps
• Lines or other noise might appear on the screen
when this function is operated, but it is not a
malfunction.
Using the ◄/► buttons adjusts the strength of whole color.
Weak
Strong
ó
COLOR
TINT
• This item can be selected only for a video, s-video and component
video signal.
Using the ◄/► buttons adjusts the tint.
Reddish
• This item can be selected only for a video, s-video and component
video signal.
Greenish
ó
Using the ◄/► buttons adjusts the sharpness.
Weak
Strong
ó
SHARPNESS
• There may be some noise and/or the screen may flicker for a
moment when an adjustment is made. This is not a malfunction.
(continued on next page)
28
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE menu
Item
Description
This item is available only for CP-X2510N
or CP-X3010N.
Using the ▲/▼ cursor buttons changes the
active iris control mode.
PRESENTATION
THEATER
OFF
ó
ó
ACTIVE IRIS
PRESENTATION : The active iris displays the best presentation
image for both bright and dark scenes.
THEATER : The active iris displays the best theater image for
both bright and dark scenes.
OFF : The active iris is always open.
• The screen may flicker when the PRESENTATION or THEATER
modes are selected. If this occurs select OFF.
This projector has 4 memories for adjustment data (for all the items
of the PICTURE menu).
Selecting a function using the ▲/▼ buttons and pressing the ► or
ENTER button performs each function.
SAVE-1
SAVE-2
SAVE-3
SAVE-4
ó
ó
ó
ó
ó
LOAD-4 LOAD-3
LOAD-2
LOAD-1
ó
SAVE-1, SAVE-2, SAVE-3, SAVE-4
Performing a SAVE function saves the current adjustment data into
the memory linked in the number included in the function’s name.
• Remember that the current data being stored of a memory will be
lost by saving new data into the memory.
MY MEMORY
LOAD-1, LOAD-2, LOAD-3, LOAD-4
Performing a LOAD function loads the data from the memory linked
in the number included in the function’s name, and adjusts the
picture automatically depending on the data.
• The LOAD functions whose linked memory has no data are
skipped.
• Remember that the current adjusted condition will be lost by
loading data. If you want to keep the current adjustment, please
save it before performing a LOAD function.
• There may be some noise and the screen may flicker for a
moment when loading data. This is not malfunction.
• You can perform the LOAD function using MY BUTTONs. Please
see MY BUTTON item in OPTION menu ( 45).
29
Download from Www.Somanuals.com. All Manuals Search And Download.
IMAGE menu
IMAGE menu
From the IMAGE menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item
Description
Using the ▲/▼ buttons switches the mode for aspect ratio.
For a computer signal
NORMAL
4:3
16:9
16:10
ó
ó
ó
For a video signal, s-video signal or component video signal
4:3 16:9 14:9
ASPECT
ó
ó
For no signal
4:3 (fixed)
• The NORMAL mode keeps the original aspect ratio of the signal.
Using the ◄/► buttons adjusts the over-scan ratio.
Small (It magnifies picture)
Large (It reduces picture)
ó
• This item can be selected only for a video, s-video and component
video signal.
OVER SCAN
• When this adjustment is too large, certain degradation may appear
at the frame area of the picture. In such a case, please adjust small.
Using the ◄/► buttons adjusts the vertical position.
Down
Up
ó
• Over-adjusting the vertical position may cause noise to appear on
the screen. If this occurs, please reset the vertical position to the
default setting. Pressing the RESET button when the V POSITION
is selected will reset the V POSITION to the default setting.
• When this function is performed on a video signal, s-video signal,
or component video signal, the range of this adjustment depends
V POSITION
on OVER SCAN ( above) setting. It is not possible to adjust when
OVER SCAN is set to 10.
Using the ◄/► buttons adjusts the horizontal position.
Left
Right
ó
•
Over-adjusting the horizontal position may cause noise to appear on
the screen. If this occurs, please reset the horizontal position to the
default setting. Pressing the RESET button when the H POSITION is
selected will reset the H POSITION to the default setting.
H POSITION
• When this function is performed on a video signal, s-video signal,
or component video signal, the range of this adjustment depends
on OVER SCAN ( above) setting. It is not possible to adjust when
OVER SCAN is set to 10.
(continued on next page)
30
Download from Www.Somanuals.com. All Manuals Search And Download.
IMAGE menu
Item
Description
Using the ◄/► buttons adjusts the horizontal phase to eliminate flicker.
Right Left
ó
H PHASE
• This item can be selected only for a computer signal or a
component video signal.
Using the ◄/► buttons adjusts the horizontal size.
Small
Large
ó
• This item can be selected only for a computer signal.
• When this adjustment is excessive, the picture may not be
displayed correctly. In such a case, please reset the adjustment
by pressing the RESET button on the remote control during this
operation.
H SIZE
• Images might appear degraded when this function is operated, but
it is not a malfunction.
Selecting this item performs the automatic adjustment feature.
For a computer signal
The vertical position, the horizontal position and the horizontal
phase will be automatically adjusted.
Make sure that the application window is set to its maximum size
prior to attempting to use this feature. A dark picture may still be
incorrectly adjusted. Use a bright picture when adjusting.
For a video signal and s-video signal
The video format best suited for the respective input signal will
be selected automatically. This function is available only when
the AUTO is selected for the VIDEO FORMAT item in the INPUT
menu ( 33). The vertical position and horizontal position will be
automatically set to the default.
For a component video signal
AUTO ADJUST
EXECUTE
The vertical position, horizontal position and horizontal phase will be
automatically set to the default.
• The automatic adjustment operation requires approx. 10 seconds.
Also please note that it may not function correctly with some input.
• When this function is performed for a video signal, a certain extra
such as a line may appear outside a picture.
• When this function is performed for a computer signal, a black
frame may be displayed on the edge of the screen, depending on
the computer model.
• The items adjusted by this function may vary when the FINE or
DISABLE is selected for the AUTO ADJUST item of the SERVICE
item in the OPTION menu ( 46).
31
Download from Www.Somanuals.com. All Manuals Search And Download.
INPUT menu
INPUT menu
From the INPUT menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item
Description
Using the ▲/▼ buttons switches the progress mode.
TV FILM OFF
ó
ó
• This function is performed only for a video signal, s-video signal or
component video signal of 480i@60 or 576i@50.
PROGRESSIVE
• When TV or FILM is selected, the screen image will be sharp.
FILM adapts to the 2-3 Pull-Down conversion system. But these
may cause a certain defect (for example, jagged line) of the picture
for a quick moving object. In such a case, please select OFF, even
though the screen image may lose sharpness.
Using the ▲/▼ buttons switches the noise reduction mode.
HIGH
MID
LOW
ó
ó
VIDEO NR
COLOR SPACE
COMPONENT
• This function is performed only for a video signal, s-video signal or
component video signal of 480i@60 or 576i@50.
• When this function is excessive, it may cause a certain
degradation of the picture.
Using the ▲/▼ buttons switches the mode for color space.
AUTO
RGB
SMPTE240
REC709
REC601
ó
ó
ó
ó
• This item can be selected only for a computer signal or a
component video signal (except SCART RGB).
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. In such a
case, it might be good to select a suitable mode except AUTO.
Using the ▲/▼ buttons switches the function of the COMPONENT
(Y, Cb/Pb, Cr/Pr) port.
COMPONENT
SCART RGB
ó
When the SCART RGB is selected, the COMPONENT (Y, Cb/
Pb, Cr/Pr) and VIDEO ports will function as a SCART RGB port.
A SCART adapter or SCART cable is required for a SCART RGB
input to the projector. For details, contact your dealer.
(continued on next page)
32
Download from Www.Somanuals.com. All Manuals Search And Download.
INPUT menu
Item
Description
The video format for S-VIDEO port and VIDEO port can be set.
(1) Use the ▲/▼ buttons to
select the input port.
S-VIDEO
VIDEO
ó
(2) Using the ◄/► buttons
switches the mode for video
format.
VIDEO FORMAT
AUTO
NTSC
PAL
SECAM
ó
ó
ó
N-PAL
M-PAL
NTSC4.43
ó
ó
• This item is performed only for a video signal from the VIDEO port
or the S-VIDEO port.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some signals. If the
picture becomes unstable (e.g. an irregular picture, lack of color),
please select the mode according to the input signal.
The computer input signal type for COMPUTER IN1 and IN2 ports
can be set.
(1) Use the ▲/▼ buttons to select the COMPUTER IN port to be set.
COMPUTER IN1
COMPUTER IN2
ó
(2) Use the ◄/► buttons to select
the computer input signal type.
AUTO
SYNC ON G OFF
ó
COMPUTER IN
• Selecting the AUTO mode allows
you to input a sync on G signal or component video signal from the
port.
• In the AUTO mode, the picture may be distorted with certain
input signals. In such a case, remove the signal connector so that
no signal is received and select the SYNC ON G OFF, and then
reconnect the signal.
Set the frame lock function on/off for each port.
(1) Use the ▲/▼ buttons to select
the input ports.
COMPUTER IN1
COMPUTER IN2
ó
(2) Use the ◄/► buttons to turn the
frame lock function on/off .
FRAME LOCK
ON
OFF
ó
• This item can be performed only on a signal with a vertical
frequency of 49 to 51Hz, 59 to 61 Hz.
• When ON is selected, moving pictures are displayed more
smoothly.
• This function may cause a certain degradation of the picture. In
such a case, please select OFF.
(continued on next page)
33
Download from Www.Somanuals.com. All Manuals Search And Download.
INPUT menu
Item
Description
The resolution for the COMPUTER IN1 and COMPUTER IN2 input
signals can be set on this projector.
(1) In the INPUT menu select the RESOLUTION using the ▲/▼
buttons and press the ► button.
The RESOLUTION menu will be
displayed.
(2) In the RESOLUTION menu select the
resolution you wish to display using
the ▲/▼ buttons.
Selecting AUTO will set a resolution
appropriate to the input signal.
(3) Pressing the ► or ENTER button when
selecting a STANDARD resolution will
automatically adjust the horizontal and
STANDARD
vertical positions, clock phase and
horizontal size.
↓
The INPUT_INFORMATION dialog will be
displayed.
(4) To set a custom resolution use the ▲/▼ buttons to select
the CUSTOM and the RESOLUTION_CUSTOM box will be
displayed.
CUSTOM
Set the horizontal (HORZ) and
↓
vertical (VERT) resolutions using
the ▲/▼/◄/► buttons.
RESOLUTION
This function is may not support all
resolutions.
(5) Move the cursor to OK on screen and press the ► or ENTER
button. The message "ARE YOU SURE YOU WISH TO
CHANGE RESOLUTION?" appears. To save the setting, press
the ► button.
The horizontal and vertical positions, clock phase and horizontal
size will be automatically adjusted.
After the INPUT_INFORMATION
dialog has displayed for a few
seconds, the screen will return to the
RESOLUTION menu displaying the
changed resolution.
(6) To revert back to the previous
resolution without saving changes,
move the cursor to CANCEL on
screen and press the ◄ or ENTER
button.
The screen will then return to the
RESOLUTION menu displaying the
previous resolution.
• For some pictures, this function may not work well.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP menu
SETUP menu
From the SETUP menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item
Description
Selecting this item performs the Automatic keystone distortion
correction. Projector automatically corrects vertical keystone
distortion due to the (forward/backward) setup angle by itself.
This function will be executed only once when selected in the menu.
When the slant of the projector is changed, execute this function
again.
• The adjustable range of this function will vary among inputs. For
some input, this function may not work well.
• When V:INVERT or H&V:INVERT is selected to the MIRROR item
in the SETUP menu, if the projector screen is inclined or angled
downward, this function may not work correctly.
• When the zoom adjustment is set to the TELE (telephoto focus),
this function may be excessive. This function should be used when
the zoom adjustment is set to the full WIDE (wide-angle focus)
whenever possible.
AUTO KEYSTONE
EXECUTE
• When the projector is placed on the level (about ±3°), this function
may not work.
• When the projector is inclined to near ±30 degree or over, this
function may not work well.
• This function will be unavailable when the Transition Detector is on
(
59).
Using the ◄/► buttons corrects the vertical keystone distortion.
Shrink the bottom of the image Shrink the top of the image
ó
• The adjustable range of this function will vary among inputs. For
some input, this function may not work well.
• When the zoom adjustment is set to the TELE (telephoto focus),
this function may be excessive. This function should be used when
the zoom adjustment is set to the full WIDE (wide-angle focus)
whenever possible.
KEYSTONE
ECO MODE
• This function will be unavailable when the Transition Detector is on
(
59).
Using the ▲/▼ buttons turns off/on the eco mode.
NORMAL ECO
ó
• When the ECO is selected, acoustic noise and screen brightness
are reduced.
(continued on next page)
35
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP menu
Item
Description
Using the ▲/▼ buttons switches the mode for mirror status.
MIRROR
NORMAL
H:INVERT
V:INVERT
H&V:INVERT
ó
ó
ó
If the Transition Detector is on and MIRROR status is changed,
TRANSITION DETECTOR ON alarm ( 59) will be displayed when
projector is restarted after the AC power is turned off.
Using ▲/▼ buttons switches the standby mode setting between
NORMAL and SAVING.
NORMAL
SAVING
ó
When SAVING is selected, the power consumption in the standby
mode is lowered with some functional restriction as below:
• When SAVING is selected, the RS-232C communication control
except to turn the projector on and the network function are disabled
while the projector is in the standby mode. If the COMMUNICATION
TYPE in the COMMUNICATION menu is set to NETWORK
BRIDGE, all of the RS-232C commands are disabled (48).
• When SAVING is selected, AUDIO OUT STANDBY setting of
STANDBY MODE
AUDIO SOURCE ( 37) is invalid, and no signal is output from
AUDIO OUT port in the standby mode.
The combination of a picture shown on screen and output from the
MONITOR OUT port can be arranged in the menu.
The picture coming into the port selected in the (2) is output to the
MONITOR OUT port while an image from the port chosen in the (1) is on screen.
(1) Choose a picture input port using ▲/▼ buttons.
COMPUTER IN1
COMPUTER IN2
ó
STANDBY
COMPONENT
(Y, Cb/Pb, Cr/Pr)
VIDEO
S-VIDEO
ó
ó
• Choose STANDBY, to select the output
signal from the MONITOR OUT port in the standby mode.
STANDBY settings can be selected individually for NORMAL or
MONITOR OUT
SAVING, which is selected in the STANDBY MODE ( above).
(2) Select one of the COMPUTER IN ports using ◄/► buttons.
Choosing the COMPUTER IN1 allows the following choice.
COMPUTER IN1
OFF
ó
Choosing the COMPUTER IN2 allows the following choice.
COMPUTER IN2 OFF
ó
Choosing other input or STANDBY allows the following choice.
COMPUTER IN1 COMPUTER IN2 OFF
ó
ó
• OFF disables the MONITOR OUT port.
• Initial settings for STANDBY are the following: COMPUTER IN1
when NORMAL is selected in STANDBY MODE; and OFF when
SAVING is selected in STANDBY MODE.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
AUDIO menu
AUDIO menu
From the AUDIO menu, items shown in the table
below can be performed. Select an item using the
▲/▼ cursor buttons, and press the ► cursor button
or the ENTER button to execute the item. Then
perform it according to the following table.
Item
Description
Using the ◄/► buttons adjusts the volume.
High Low
VOLUME
ó
Using the ▲/▼ buttons turns on/off the built-in speaker.
ON OFF
SPEAKER
ó
When OFF is selected, the built-in speaker does not work.
The combination of a picture and audio input port can be arranged
in the menu.
The audio coming into the port selected in the (2) is output while an
image from the port chosen in the (1) is on screen.
(1) Choose a picture input port using the ▲/▼ buttons.
COMPUTER IN1
COMPUTER IN2
ó
AUDIO OUT STANDBY
COMPONENT
(Y, Cb/Pb, Cr/Pr)
VIDEO
S-VIDEO
ó
ó
• Choose AUDIO OUT STANDBY, to
select the audio output to the AUDIO OUT port in the standby
mode. The built-in speaker does not work in the standby mode.
• While RETURN is selected, pressing the ◄ button returns to the
previous menu.
AUDIO SOURCE
(2) Select one of the AUDIO IN ports using ◄/► buttons.
AUDIO IN1
AUDIO IN2
AUDIO IN3
ó
ó
ó
•
•
disables the audio output.
C.C. (Closed Caption) is automatically activated when is selected
and an input signal containing C.C. is received. This function is
available only when the signal is NTSC for VIDEO or S-VIDEO, or
480i@60 for COMPONENT, COMPUTER IN1 or COMPUTER IN2,
and when AUTO is selected for DISPLAY in the C.C. menu under the
SCREEN menu ( 42).
37
Download from Www.Somanuals.com. All Manuals Search And Download.
SCREEN menu
SCREEN menu
From the SCREEN menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item
Description
Using the ▲/▼/◄/► buttons switches the OSD (On Screen
Display) language.
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
ó
ó
ó
LANGUAGE
(shown in the LANGUAGE dialog)
Press the ENTER or INPUT button to save the language setting.
Using the ▲/▼/◄/► buttons adjusts the menu position.
MENU POSITION To quit the operation, press the MENU button on the remote control
or keep no operation for about 10 seconds.
Using the ▲/▼ buttons switches the mode for the blank screen.
The blank screen is a screen for the temporarily blanking feature
(
22). It is displayed by pressing the BLANK button on the remote
control.
MyScreen
ORIGINAL
BLUE
WHITE
BLACK
ó
ó
ó
ó
BLANK
MyScreen : Screen can be registered by the MyScreen item ( 39).
ORIGINAL : Screen preset as the standard screen.
BLUE, WHITE, BLACK : Plain screens in each color.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL
screen will change to the plain black screen after several minutes.
Using the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an
unsuitable signal is detected.
MyScreen
ORIGINAL
OFF
ó
ó
MyScreen : Screen can be registered by the MyScreen item ( 39).
ORIGINAL : Screen preset as the standard screen.
START UP
OFF : Plain black screen.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL
screen will change to the BLANK screen ( above) after several
minutes. If also the BLANK screen is the MyScreen or ORIGINAL,
the plain black screen is instead used.
• When the ON is selected to the MyScreen PASSWORD item in
the SECURITY menu ( 57), the START UP is fixed to MyScreen.
(continued on next page)
38
Download from Www.Somanuals.com. All Manuals Search And Download.
SCREEN menu
Item
Description
This item allows you to capture an image for use as a MyScreen
image which can be used as the BLANK screen and START UP
screen. Display the image you want to capture before executing the
following procedure.
1. Selecting this item displays a dialog
titled “MyScreen”. It will ask you if
you start capturing an image from
the current screen.
Please wait for the target image to be displayed, and press the
ENTER or INPUT button when the image is displayed. The image
will freeze and the frame for capturing will appear.
To stop performing, press the RESET button on the remote
control.
2. Using the ▲/▼/◄/► buttons adjusts the
frame position.
Please move the frame to the position
of the image which you want to use. The
frame may not be able to be moved for
some input signals.
MyScreen
To start registration, press the ENTER
or INPUT button on the remote control.
To restore the screen and return to the previous dialog, press the
RESET button on the remote control.
Registration takes several minutes.
When the registration is completed, the registered screen and the
following message is displayed for several seconds:
“MyScreen registration is finished.”
If the registration failed, the following message is displayed:
“A capturing error has occurred. Please try again.”
• This function cannot be selected when the ON is selected to the
MyScreen Lock item ( 40).
• This function cannot be selected when the ON is selected to the
MyScreen PASSWORD item in SECURITY menu ( 57).
(continued on next page)
39
Download from Www.Somanuals.com. All Manuals Search And Download.
SCREEN menu
Item
Description
Using the ▲/▼ buttons turns on/off the MyScreen lock function.
ON
OFF
ó
When the ON is selected, the item MyScreen is locked. Use this
function for protecting the current MyScreen.
MyScreen Lock
• This function cannot be selected when the ON is selected to the
MyScreen PASSWORD item in SECURITY menu ( 57).
Using the ▲/▼ buttons turns on/off the message function.
ON
OFF
ó
When the ON is selected, the following message function works.
“AUTO IN PROGRESS” while automatically adjusting
“NO INPUT IS DETECTED”
“SYNC IS OUT OF RANGE”
“INVALID SCAN FREQ”
“Searching….” while searching for the input
“Detecting….” while an input signal is detected
The indication of the input signal displayed by changing
The indication of the aspect ratio displayed by changing
The indication of the PICTURE MODE displayed by changing
The indication of the ACTIVE IRIS displayed by changing
The indication of the MY MEMORY displayed by changing
The indication of “FREEZE” and “II” while freezing the screen by
pressing the FREEZE button.
MESSAGE
The indication of the TEMPLATE displayed by changing.
• When the OFF is selected, please remember if the picture is
frozen. Do not mistake freezing for a malfunction ( 22).
(continued on next page)
40
Download from Www.Somanuals.com. All Manuals Search And Download.
SCREEN menu
Item
Description
Each input port for this projector can have a name applied to it.
(1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE
NAME and press the ► or ENTER button.
The SOURCE NAME menu will be displayed.
(2) Use the ▲/▼ buttons on the SOURCE
NAME menu to select the port to be
named and press the ► button. Right
side of the menu is blank until a name is
specified.
The SOURCE NAME dialog will be
displayed.
(3) The current name will be displayed on
the first line. Use the ▲/▼/◄/► buttons
and the ENTER or INPUT button to
select and enter characters. To erase 1
character at one time, press the RESET
button or press the ◄ and INPUT button
at the same time. Also if you move the
cursor to DELETE or ALL CLEAR on
screen and press the ENTER or INPUT
button, 1 character or all characters will
be erased. The name can be a maximum
of 16 characters.
SOURCE NAME
(4) To change an already inserted character,
press the ▲ button to move the cursor to
the first line, and use the ◄/► buttons to
move the cursor on the character to be
changed.
After pressing the ENTER or INPUT button, the character is
selected. Then, follow the same procedure as described at the
item (3) above.
(5) To finish entering text, move the cursor to the OK on screen and
press the ►, ENTER or INPUT button. To revert to the previous
name without saving changes, move the cursor to the CANCEL
on screen and press the ◄, ENTER or INPUT button.
Using the ▲/▼ buttons switches the mode for the template screen.
Press the ► button to display the selected template, and press the
◄ button to close the displayed screen.
The last selected template is displayed when the MY BUTTON
TEMPLATE
allocated to the TEMPLATE function is pressed ( 45).
TEST PATTERN
DOT-LINE1
ó
DOT-LINE4
DOT-LINE3
DOT-LINE2
ó
ó
(continued on next page)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
SCREEN menu
Item
Description
The C.C. is the function that displays a
transcript or dialog of the audio portion of
a video, files or other presentation or other
relevant sounds. It is required to have NTSC
format video or 480i@60 format component
video source supporting C.C. feature to
utilize this function.
It may not work properly, depending on equipment or signal source.
In this case, please turn off the Closed Caption.
DISPLAY
Select Closed Caption DISPLAY setting from following options using
▲/▼ buttons.
AUTO
ON
OFF
ó
ó
AUTO : Closed Caption automatically displays when the volume
is muted.
ON : Closed Caption is on
OFF : Closed Caption is off
• The caption is not displayed when the OSD menu is active.
• The Closed Caption is the function to display the dialogue,
narration, and / or sound effects of a television program or other
video sources. The Closed Caption availability is depending upon
broadcaster and/or content.
C.C.
(Closed Caption)
MODE
Select Closed Caption MODE setting from following options using
▲/▼ buttons.
CAPTIONS
TEXT
ó
CAPTIONS : Display Closed Caption
TEXT : Display Text data, which is for additional information such
as news reports or a TV program guide. The information
covers the entire screen. Not all of the C.C. program has
Text information.
CHANNEL
Select Closed Caption CHANNEL from following options using ▲/▼
buttons.
1
2
3
4
ó
ó
ó
1: Channel 1, primary channel / language
2: Channel 2
3: Channel 3
4: Channel 4
The channel data may vary, depending on the content. Some
channel might be used for secondary language or empty.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTION menu
OPTION menu
From the OPTION menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item, except for the items LAMP TIME
and FILTER TIME. Then perform it according to the
following table
Item
Description
Using the ▲/▼ buttons turns on/off the automatic signal search
function.
ON
OFF
ó
When the ON is selected, detecting no signal automatically cycles
through input ports in the following order. The search is started from
the current port. Then when an input is found, the projector will stop
searching and display the image.
AUTO SEARCH
COMPUTER IN1
COMPUTER IN2
COMPONENT (Y, Cb/Cr, Cr/Pr)
ð
VIDEO S-VIDEO
Using the ▲/▼ buttons turns on/off the automatic keystone function.
ON OFF
ó
ON : Automatic keystone distortion correction will be executed
whenever changing the slant of the projector.
OFF : This function is disabled. Please execute the AUTO
KEYSTONE EXECUTE in the SETUP menu for automatic
keystone distortion correction.
AUTO
KEYSTONE
• When the projector is suspended from the ceiling this feature will
not function properly so select the OFF.
• This function will be unavailable when the Transition Detector is on
(
59).
Using the ▲/▼ buttons turns on/off the DIRECT ON function.
ON OFF
ó
When set to the ON, the lamp in projector will be automatically
turned on without the usual procedure ( 15), only when the
projector is supplied with the power after the power was cut while
the lamp was on.
DIRECT ON
• This function does not work as long as the power has been
supplied to the projector while the lamp is off.
•
After turning the lamp on by the DIRECT ON function, if neither
input nor operation is detected for about 30 minutes, the projector is
turned off, even though the AUTO OFF function ( 44) is disabled.
(continued on next page)
43
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTION menu
Item
Description
Using the ▲/▼ buttons adjusts the time to count down to
automatically turn the projector off.
Long (max. 99 minutes)
Short (min. 0 minute = DISABLE)
ó
When the time is set to 0, the projector is not turned off automatically.
When the time is set to 1 to 99, and when the passed time with no-
signal or an unsuitable signal reaches at the set time, the projector
lamp will be turned off.
AUTO OFF
If one of the projector's buttons or the remote control buttons
is pressed or one of the commands (except get commands) is
transmitted to the CONTROL port during the corresponding time,
projector will not be turned off.
Please refer to the section “Turning off the power” ( 15).
The lamp time is the usage time of the lamp, counted after the last
resetting. It is shown in the OPTION menu.
Pressing the RESET button on the remote control or the ► button
of the projector displays a dialog.
To reset the lamp time, select the OK using the ► button.
LAMP TIME
CANCEL OK
ð
• Please reset the lamp time only when you have replaced the lamp,
for a suitable indication about the lamp.
• For the lamp replacement, see the section "Replacing the lamp"
(
62, 63).
The filter time is the usage time of the air filter, counted after the last
resetting. It is shown in the OPTION menu.
Pressing the RESET button on the remote control or the ► button
of the projector displays a dialog.
To reset the filter time, select the OK using the ► button.
FILTER TIME
CANCEL OK
ð
•
Please reset the filter time only when you have cleaned or replaced
the air filter, for a suitable indication about the air filter.
• For the air filter cleaning, see the section “Cleaning and replacing
the air filter” ( 64, 65).
(continued on next page)
44
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTION menu
Item
Description
This item is to assign one of the following functions to MY BUTTON
1/2 on the remote control ( 6).
(1) Use the ▲/▼ buttons on the MY BUTTON menu to select a
MY BUTTON - (1/2) and press the ► button to display the MY
BUTTON setup dialog.
(2) Then using the ▲/▼/◄/► buttons sets one of the following
functions to the chosen button. Press the ENTER or INPUT
button to save the setting.
• COMPUTER IN1: Sets port to COMPUTER IN1.
• COMPUTER IN2: Sets port to COMPUTER IN2.
• COMPONENT: Sets port to COMPONENT (Y, Cb/Pb, Cr/Pr).
• S-VIDEO: Sets port to S-VIDEO.
• VIDEO: Sets port to VIDEO.
• INFORMATION: Displays SYSTEM_INFORMATION,
INPUT_INFORMATION ( 50), NETWORK_INFORMATION
(
55) or nothing.
• AUTO KEYSTONE : Performs automatic keystone distortion
correction ( 35).
• MY MEMORY: Loads one of adjustment data stored ( 29).
When more than one data are saved, the adjustment
changes every time the MY BUTTON is pressed.
When no data is saved in memory, the
MY BUTTON
dialog "No saved data" appears.
When the current adjustment is not
saved to memory, the dialog as shown in
the right appears.
If you want to keep the current adjustment, please press
the ► button to exit. Otherwise loading a data will overwrite the
current adjusted condition.
• ACTIVE IRIS: Changes the active iris mode.
(This item is available only for CP-X2510N or CP-X3010N.)
• PICTURE MODE: Changes the PICTURE MODE ( 25).
•
FILTER RESET: Displays the filter time reset confirmation dialogue
( 44).
• TEMPLATE: Makes the template pattern selected to the
TEMPLATE item ( 41) appear or disappear.
• AV MUTE: Turns the picture and audio on/off.
• MY IMAGE: Displays the MY IMAGE menu ( 54).
• MESSENGER: Turns the messenger text displayed on the screen on/off
Messenger Function of the User's Manual - Network Guide).
(
When there is no transferred text data to display, the message
”NO MESSENGER DATA" appears.
U
sing ▲/▼ buttons selects the picture input port to be selected with
pressing the MY SOURCE/DOC.CAMERA button on the remote
control.
Select the picture input that is connected with a document camera.
MY SOURCE
COMPUTER IN1
COMPUTER IN2
ó
VIDEO
S-VIDEO
COMPONENT
ó
ó
(continued on next page)
45
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTION menu
Item
Description
Selecting this item displays the SERVICE
menu.
Select an item using the ▲/▼ buttons,
and press the ► button or the ENTER
button on the remote control to execute
the item.
FAN SPEED
Using the ▲/▼ buttons switches the rotation speed of the cooling
fans. The HIGH is the mode for use at highlands etc. Note that the
projector is noisier when the HIGH is selected.
HIGH
NORMAL
ó
AUTO ADJUST
Using the ▲/▼ buttons to select one of the mode. When the
DISABLE is selected, the automatic adjustment feature is disabled.
FINE
FAST
DISABLE
ó
ó
FINE: Finer tuning including H.SIZE adjustment.
FAST: Faster tuning, setting H.SIZE to prearranged data for the
input signal.
•
Depending on conditions, such as input image, signal cable to the
projector, environment around the projector, etc., the automatic adjustment
may not work correctly. In such a case, please choose DISABLE to
SERVICE
disable the automatic adjustment, and make adjustment manually
.
GHOST
1. Select a color element of ghost using
the ◄/► buttons.
2. Adjust the selected element using the
▲/▼ buttons to disappear ghost.
FILTER MESSAGE
Use the ▲/▼ button to set the timer for notifying by the message
when to replace the filter unit
100h
200h
500h
1000h
2000h
5000h
OFF
ó
ó
ó
ó
ó
ó
After choosing an item except OFF, the message “REMINDER ***
HRS PASSED ....” will appear after the timer reaches the interval
time set by this feature ( 68).
When the OFF is chosen, the message will not appear. Utilize this
feature to keep the air filter clean, setting the suitable time according
to your environment of this projector.
• Please take care of the filter unit periodically, even if there is
no message. If the air filter becomes to be blocked by dust or
other matter, the internal temperature will rise, which could cause
malfunction, or reduce the lifetime of the projector.
• Please be careful with the operating environment of the projector
and the condition of the filter unit.
(continued on next page)
46
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTION menu
Item
Description
KEY LOCK
Using the ▲/▼ buttons turns on/off the key lock feature. When ON
is selected, the buttons on the projector except the STANDBY/ON
button are locked.
ON
OFF
ó
• Please use this function to prevent tampering or accidental
operation. This function does not have any effect on the remote
control.
REMOTE FREQ.
(1) Use the ▲/▼ button to change the projector's remote sensor
frequency setting ( 4).
1:NORMAL
2:HIGH
ó
(2) Use the ◄/► button to change the
projector's remote sensor on or off.
ON
OFF
ó
The factory default setting is for both 1:NORMAL and 2:HIGH to be
on. If the remote control does not function correctly, disable either of
them ( 14).
It's not possible to disable both options at the same time.
SERVICE
(continued)
Selecting this item displays COMMUNICATION
menu.
In this menu, you can configure the serial
communication settings of the projector using the
CONTROL port.
• Select an item using the cursor buttons ▲/▼.
COMMUNICATION
Then pressing the ► button opens the submenu
for the setting item you selected. Or, pressing
the ◄ button instead of the ► button makes the
menu back to the previous one without changing
the setup. Each submenu can be operated as
described above.
• When COMMUNICATION TYPE (48) is set to
OFF, the other items in COMMUNICATION menu
are invalid.
• For the function of serial communication, refer to
the User's Manual - Network Guide.
(continued on next page)
47
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTION menu
Item
Description
COMMUNICATION TYPE
Select the communication type for transmission via
the CONTROL port.
NETWORK BRIDGE OFF
ó
NETWORK BRIDGE: Select this type, if it is
required to control an external device as a network
terminal, via this projector from the computer.
The CONTROL port doesn't accept RS-232C
commands.( Controlling the external device
via the projector (using the NETWORK BRIDGE
function) of the User’s Manual - Network Guide)
OFF: Select this mode to receive RS-232C
commands using the CONTROL port.
•
OFF is selected as the default setting.
• When you select the NETWORK BRIDGE, check
the item, TRANSMISSTION METHOD ( below).
SERIAL SETTINGS
Select the serial communication condition for the
CONTROL port.
BAUD RATE
4800bps
9600bps
19200bps
38400bps
ó
ó
ó
SERVICE
(continued)
COMMUNICATION
(continued)
PARITY
NONE
ODD
EVEN
ó
ó
•
The BAUD RATE is fixed to 19200bps and PARITY
is fixed NONE when the COMMUNICATION TYPE
is set to OFF above).
(
TRANSMISSION METHOD
Select the transmission method for communication by
the NETWORK BRIDGE from the CONTROL port.
HALF-DUPLEX
FULL-DUPLEX
ó
HALF-DUPLEX: This method lets the projector
make two way communication, but only one
direction, either transmitting or receiving data, is
allowed at a time.
FULL-DUPLEX: This method lets the projector
make two way communication, transmitting and
receiving data at the same time.
• HALF-DUPLEX is selected as the default setting.
• When you select HALF-DUPLEX, check the items,
RESPONSE LIMIT TIME and BYTES INTERVAL
TIMEOUT ( 49).
(continued on next page)
48
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTION menu
Item
Description
RESPONSE LIMIT TIME
Select the time period to wait for receiving
response data from other device communicating by
the NETWORK BRIDGE and the HALF-DUPLEX
through the CONTROL port.
OFF
1s
2s
3s
ó
ó
ó
OFF: Select this mode if it is not required to check
the responses from the device that the projector
sends data to. In this mode, the projector can
send out data from the computer continuously.
1s /2s /3s: Select the time period to keep the
projector waiting for response from the device
that the projector sends data to. While waiting the
response, the projector does not send out any
data from the CONTROL port.
SERVICE
(continued)
COMMUNICATION
(continued)
• This menu is available only when the NETWORK
BRIDGE is selected for the COMMUNICATION
TYPE and the HALF-DUPLEX is selected for the
TRANSMISSION METHOD ( 48).
• OFF is selected as the default setting.
BYTES INTERVAL TIMEOUT
Select the blank time length to judge that the
response data has finished in the communicating
in the condition of the NETWORK BRIDGE and
the HALF-DUPLEX through the CONTROL port.
50ms 100ms 150ms 200ms
ó
ó
ó
• This menu is available only when NETWORK
BRIDGE is selected for the COMMUNICATION
TYPE and HALF-DUPLEX is selected for the
TRANSMISSION METHOD ( 48).
•
50ms is selected as the default setting.
(continued on next page)
49
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTION menu
Item
Description
INFORMATION
Selecting this item displays a dialog titled “INPUT_INFORMATION”.
It shows the information about the current input.
• The “FRAME LOCK” message on the dialog means the frame lock
function is working.
• The “SCART RGB” message means the COMPONENT port
is working as a SCART RGB input port. Please refer to the
SERVICE
(continued)
COMPONENT item in INPUT menu ( 32).
• This item can't be selected for no signal and sync out.
• When the MY TEXT DISPLAY is set to ON, the MY TEXT is
displayed together with the input information in the INPUT_
INFORMATION box ( 61).
FACTORY RESET
Selecting OK using the ► button performs this function. By this
function, all the items in all of menus will collectively return to the
initial setting. Note that the items LAMP TIME, FILTER TIME,
LANGUAGE, FILTER MESSAGE, NETWORK and SECURITY
settings are not reset.
CANCEL OK
ð
50
Download from Www.Somanuals.com. All Manuals Search And Download.
NETWORK menu
NETWORK menu
Remember that incorrect network settings on this
projector may cause trouble on the network. Be sure
to consult with your network administrator before
connecting to an existing access point on your
network.
Select “NETWORK” from the main menu to access
the following functions.
Select an item using the ▲/▼ cursor buttons on the projector or remote control,
and press the ► cursor button on the projector or remote control, or ENTER
button on the remote control to execute the item. Then perform it according to the
following table.
See the User’s Manual - Network Guide for details of NETWORK operation.
NOTE • If you are not utilizing SNTP (Date/Time Settings of the User’s
Manual - Network Guide), then you must set the DATE AND TIME during the
initial installation.
• The network communication control is disabled while the projector is in
standby mode if the STANDBY MODE item of SETUP menu is set to SAVING.
Please connect the network communication to the projector after setting the
STANDBY MODE to NORMAL (36).
Item
Description
Selecting this item displays the SETUP
Menu for the network.
Use the ▲/▼ buttons to select an item,
and the ► or ENTER button on the remote
control to perform the item.
Use the ▲/▼ buttons to turn DHCP on/off.
ON
OFF
ó
SETUP
Select OFF when the network does not have
DHCP enabled.
DHCP
(Dynamic Host
Configuration
Protocol)
• When the “DHCP” setting changes to “ON”, it
takes a little time to obtain IP address from DHCP
server.
• Auto IP function will be assigned an IP address if
the projector could not obtain an IP address from
server even if DHCP is “ON”.
(continued on next page)
51
Download from Www.Somanuals.com. All Manuals Search And Download.
NETWORK menu
Item
Description
Use the ▲/▼/◄/► buttons to enter the IP
ADDRESS.
This function can only be used when DHCP is set
to OFF.
IP ADDRESS
• The IP ADDRESS is the number that identifies
this projector on the network. You cannot have two
devices with the same IP ADDRESS on the same
network.
• The IP ADDRESS “0.0.0.0” is prohibited.
Use the ▲/▼/◄/► buttons to enter the same
SUBNET MASK used by your computer.
This function can only be used when DHCP is set
to OFF.
SUBNET
MASK
• The SUBNET MASK ”0.0.0.0” is prohibited.
Use the ▲/▼/◄/► buttons to enter the DEFAULT
GATEWAY (a node on a computer network that
serves as an access point to another network)
address.
This function can only be used when DHCP is set
to OFF.
DEFAULT
GATEWAY
SETUP
(continued)
Use the ▲/▼/◄/► buttons to input the DNS
server address.
The DNS server is a system to control domain
names and IP addresses on the Network.
DNS SERVER
Use the ▲/▼ buttons to enter the TIME
DIFFERENCE.
Set the same TIME DIFFERENCE as the one
set on your computer. If unsure, consult your IT
manager.
TIME
DIFFERENCE
Use the ► button to return to the menu after
setting the TIME DIFFERENCE.
Use the ▲/▼/◄/► buttons to enter the Year (last
two digits), Month, Date, Hour and Minute.
DATE AND
TIME
• The projector will override this setting and retrieve
DATE AND TIME information from the Time server
when SNTP is enabled. ( Date/Time Settings
of the User’s Manual - Network Guide)
(continued on next page)
52
Download from Www.Somanuals.com. All Manuals Search And Download.
NETWORK menu
Item
Description
(1) Use the ▲/▼ buttons on the
NETWORK menu to select the
PROJECTOR NAME and press
the ► button. The PROJECTOR
NAME dialog will be displayed.
(2) The current PROJECTOR NAME will be displayed on the first 3
lines. If not yet written, the lines will be blank.
Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to
select and enter characters.
To erase 1 character at one time, press the RESET button or
press the ◄ and INPUT button at the same time. Also if you
move the cursor to DELETE or ALL CLEAR on screen and
push the ENTER or INPUT button, 1 character or all characters
will be erased.The PROJECTOR NAME can be input up to 64
characters.
PROJECTOR
NAME
(3) To change an already inserted
character, press the ▲/▼ button
to move the cursor to one of the
first 3 lines, and use the ◄/►
buttons to move the cursor on the
character to be changed. After
pressing the ENTER or INPUT
button, the character is selected.
Then, follow the same procedure
as described at the item (2) above.
(4) To finish entering text, move the cursor to the OK on screen and
press the ►, ENTER or INPUT button. To revert to the previous
PROJECTOR NAME without saving changes, move the cursor
to the CANCEL on screen and press the ◄, ENTER or INPUT
button.
(continued on next page)
53
Download from Www.Somanuals.com. All Manuals Search And Download.
NETWORK menu
Item
Description
Selecting this item displays the MY
IMAGE menu.
The application software “PJImage”
is required to store image(s) into the
projector.
Use the ▲/▼ buttons to select an item which is a still image by the
MY IMAGE ( MY IMAGE (Still Image Transfer) Display of the
User’s Manual - Network Guide) and the ► or ENTER button to
display the image.
• The item without image stored cannot be selected.
• The image names are each displayed in 16 characters or less.
MY IMAGE
To switch the image displayed
Use the ▲/▼ buttons.
To return to the menu
Press the ◄ button on the remote control.
To erase the image displayed and its source file in the projector.
(1) Press the RESET button on the
remote control while displaying an
image to display the MY IMAGE
DELETE menu.
(2) Press the ► button to perform to erase.
To stop erasing, press the ◄ button.
Use the ▲/▼ buttons to turn the AMX Device Discovery on/off.
ON
OFF
ó
AMX D.D.
(AMX Device
Discovery)
When ON is selected, the projector can be detected by controllers
of AMX connected to the same network. For the details of AMX
Device Discovery, visit the AMX web site.
(continued on next page)
54
Download from Www.Somanuals.com. All Manuals Search And Download.
NETWORK menu
Item
Description
Selecting this item displays the NETWORK_INFORMATION dialog
for confirming the network settings.
INFORMATION
• Only the first 16 characters of the projector neme are displayed.
• Nothing (blank) is shown in the “PROJECTOR NAME” field until
you setup the item (53).
•
When the voltage level of the battery for the built in clock
decreases, the set time may become incorrect even though accurate
date and time are input. Replace the battery suitably (66).
• IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY indicate
“0.0.0.0” when DHCP is ON and the projector has not gotten
address from DHCP server.
Executing this item restarts and initializes the network functions.
Choose the RESTART EXECUTE using the button ►.
Then use the button ► to execute.
SERVICE
Network will be once cut off when choose restart.
If DHCP is selected on, IP address may be changed.
After selecting RESTART EXECUTE, NETWORK menu may not be
controlled approx. 30 seconds.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
SECURITY menu
SECURITY menu
This projector is equipped with security functions.
From the SECURITY menu, items shown in the table
below can be performed.
To use SECURITY menu: User registration is required
before using the security functions.
Enter the SECURITY menu
1. Use the ▲/▼ buttons on the SECURITY menu to select ENTER PASSWORD and press the ►
button. The ENTER PASSWORD box will be displayed.
2. Use the ▲/▼/◄/► buttons to enter the registered password. The
factory default password is 9676. This password can be changed
. Move the cursor to the right side of the ENTER
below)
(
PASSWORD box and press the ► button to display the SECURITY
menu.
• It is strongly recommended the factory default password to be
changed as soon as possible.
• If an incorrect password is input, the ENTER PASSWORD box
will be displayed again. If incorrect password is input 3 times, the
projector will turn off. Afterwards the projector will turn off every time
an incorrect password is input.
3. Items shown in the table below can be performed.
If you have forgotten your password
(1). While the ENTER PASSWORD box is displayed, press and hold
the RESET button on the remote control for about 3 seconds or
press and hold the INPUT button for 3 seconds while pressing the
► button on the projector.
(2). The 10 digit Inquiring Code will be displayed. Contact your dealer
with the 10 digit Inquiring Code. Your password will be sent after
your user registration information is confirmed.
• If there is no key input for about 55 seconds while the Inquiring Code is displayed, the menu will
close. If necessary, repeat the process from (1).
Item
Description
(1) Use the ▲/▼ buttons on the SECURITY menu
to select SECURITY PASSWORD CHANGE
and press the ► button to display the ENTER
NEW PASSWORD box.
(2) Use the ▲/▼/◄/► buttons to enter the new password.
(3) Move the cursor to the right side of the
ENTER NEW PASSWORD box and press the
► button to display the NEW PASSWORD
AGAIN box, enter the same password again.
(4) Move the cursor to the right side of the NEW
PASSWORD AGAIN box and press the ►
button and the NOTE NEW PASSWORD box
will be displayed for about 30 seconds, please
make note of the password during this time.
SECURITY
PASSWORD
CHANGE
Pressing the ENTER button on the remote control or
►
button on the
projector will close the NOTE NEW PASSWORD box.
• Please do not forget your password.
(continued on next page)
56
Download from Www.Somanuals.com. All Manuals Search And Download.
SECURITY menu
Item
Description
The MyScreen PASSWORD function can be used to prohibit access to the
MyScreen function and prevent the currently registered MyScreen image
from being overwritten.
1 Turning on the MyScreen PASSWORD
1-1 Use the ▲/▼ buttons on the SECURITY menu to
select MyScreen PASSWORD and press the ►
button to display the MyScreen PASSWORD on/
off menu.
1-2 Use the ▲/▼ buttons on the MyScreen
PASSWORD on/off menu to select ON.
The ENTER NEW PASSWORD box (small)
will be displayed.
ENTER NEW PASSWORD
box (small)
1-3 Use the ▲/▼/◄/► buttons to enter the
password. Move the cursor to the right side
of the ENTER NEW PASSWORD box (small)
and press the ► button to display the NEW
PASSWORD AGAIN box, enter the same
PASSWORD again.
1-4 Move the cursor to the right side of the
NEW PASSWORD AGAIN box and press
the ► button to display the NOTE NEW
PASSWORD box for about 30 seconds,
please make note of the password during
this time.
Pressing the ENTER button on the remote control or ► button on the
MyScreen
PASSWORD
projector will return to MyScreen PASSWORD on/off menu.
When a password is set for MyScreen:
The MyScreen registration function (and menu) will be unavailable.
The MyScreen Lock menu will be unavailable.
The START UP setting will be locked on MyScreen (and the menu will be
•
•
•
unavailable).
Turning the MyScreen PASSWORD off will allow normal operation of these
functions.
Please do not forget your MyScreen PASSWORD.
•
2 Turning off the MyScreen PASSWORD
2-1 Follow the procedure in 1-1 to display the MyScreen PASSWORD on/off
menu.
2-2 Select OFF to display the ENTER
PASSWORD box (large). Enter the registered
password and the screen will return to the
MyScreen PASSWORD on/off menu.
ENTER PASSWORD box
(large)
If an incorrect PASSWORD is input, the menu will
close. If necessary, repeat the process from 2-1.
3 If you have forgotten your password
3-1 Follow the procedure in 1-1 to display the MyScreen PASSWORD on/off
menu.
3-2 Select OFF to display the ENTER PASSWORD box (large). The 10 digit
Inquiring Code will be displayed inside the box.
3-3 Contact your dealer with the 10 digit Inquiring Code. Your password will
be sent after your user registration information is confirmed.
(continued on next page)
57
Download from Www.Somanuals.com. All Manuals Search And Download.
SECURITY menu
Item
Description
PIN LOCK is a function which prevents the projector from being used unless
a registered Code is input.
1 Turning on the PIN LOCK
1-1 Use the ▲/▼ buttons on the SECURITY menu to
select PIN LOCK and press the ► button or the
ENTER button to display the PIN LOCK on/off
menu.
1-2 Use the ▲/▼ buttons on the PIN LOCK on/
off menu to select ON and the Enter PIN
Code box will be displayed.
1-3 Input a 4 part PIN code using the ▲/▼/◄/►,
COMPUTER or INPUT button.
The PIN Code again box will appear. Reenter
the same PIN code. This will complete the PIN
code registration.
If there is no key input for about 55 seconds
while the Enter PIN Code box or the PIN Code again box is displayed,
the menu will close. If necessary, repeat the process from 1-1.
•
Afterwards, anytime the projector is restarted after AC power is turned off
the Enter PIN Code box will be displayed. Enter the registered PIN code.
The projector can be used after entering the registered PIN code. If an
incorrect PIN code is input, the Enter PIN code box will be displayed again.
If an incorrect PIN Code is input 3 times, the projector will turn off. Afterwards
the projector will turn off every time an incorrect PIN code is input. The
projector will also turn off if there is no key input for about 5 minutes while
the Enter PIN code box is displayed.
PIN LOCK
This function will activate only when the projector is started after AC power
is turned off.
Please do not forget your PIN code.
•
2 Turning off the PIN LOCK
2-1 Follow the procedure in 1-1 to display the PIN LOCK on/off menu.
2-2 Use the ▲/▼ buttons to select OFF and the Enter PIN Code box will be
displayed.
Enter the registered PIN code to turn the PIN LOCK function off.
If an incorrect PIN Code is input 3 times, the menu will close.
3 If you have forgotten your PIN Code
3-1 While the Enter PIN Code box is displayed, press and hold the RESET
button for three seconds or press and hold the INPUT button for 3
seconds while pressing the ► button on the projector.
The 10 digit Inquiring Code will be displayed.
If there is no key input for about 5 minutes
while the Inquiring Code is displayed, the
•
projector will turn off.
3-2 Contact your dealer with the 10 digit Inquiring Code. Your PIN Code will
be sent after your user registration information is confirmed.
(continued on next page)
58
Download from Www.Somanuals.com. All Manuals Search And Download.
SECURITY menu
Item
Description
If this function is set to ON when the vertical angle of
the projector or MIRROR setting at which the projector
is turned on is different than the previously recorded, the
TRANSITION DETECTOR ON alarm will be displayed
and the projector will not display the input signal.
• To display the signal again, set this function OFF.
• After about 5 minutes of displaying the TRANSITION DETECTOR ON
alarm, the lamp will turn off.
• Keystone adjustment feature has been prohibited as long as the Transition
Detector function is on.
1 Turning on the TRANSITION DETECTOR
1-1 Use the ▲/▼ buttons on the SECURITY menu
to select TRANSITION DETECTOR and press
the ► or the ENTER button to display the
TRANSITION DETECTOR on/off menu.
1-2 Use the ▲/▼ buttons on the TRANSITION
DETECTOR on/off menu to select ON. Select
ON and the current angle and MIRROR
setting will be recorded. The ENTER NEW
PASSWORD box (small) will be displayed.
1-3 Use the ▲/▼/◄/► buttons to enter a
password. Move the cursor to the right side
of the ENTER NEW PASSWORD box (small)
and press the ► button to display the NEW
PASSWORD AGAIN box, enter the same
password again.
1-4 Move the cursor to the right side of the
NEW PASSWORD AGAIN box and press
the ► button to display the NOTE NEW
PASSWORD box for about 30 seconds,
please make note of the password during
this time.
ENTER NEW PASSWORD
box (small)
TRANSITION
DETECTOR
Pressing the ENTER button on the remote control or the
►
button on the
projector will return to the TRANSITION DETECTOR on/off menu.
• Please do not forget your TRANSITION DETECTOR password.
• This function will activate only when the projector is started after turning off
the AC power.
• This feature may not function properly if the projector is not in a stable
position when ON is selected.
2 Turning off the TRANSITION DETECTOR
2-1 Follow the procedure in 1-1 to display the TRANSITION DETECTOR on/off menu.
2-2 Select OFF to display the ENTER
PASSWORD box (large). Enter the registered
password and the screen will return to the
TRANSITION DETECTOR on/off menu.
If an incorrect password is input, the menu will
close. If necessary, repeat the process from 2-1.
ENTER PASSWORD box
(large)
3 If you have forgotten your password
3-1 Follow the procedure in 1-1 to display the TRANSITION DETECTOR on/off menu.
3-2 Select OFF to display the ENTER PASSWORD box (large). The 10 digit
Inquiring Code will be displayed inside the box.
3-3 Contact your dealer with the 10 digit Inquiring Code. Your password will
be sent after your user registration information is confirmed.
(continued on next page)
59
Download from Www.Somanuals.com. All Manuals Search And Download.
SECURITY menu
Item
Description
The MY TEXT PASSWORD function can prevent the MY TEXT from being
overwritten. When the password is set for the MY TEXT;
• The MY TEXT DISPLAY menu will be unavailable, which can prohibit
changing the DISPLAY setting.
• The MY TEXT WRITING menu will be unavailable, which can prevent the
MY TEXT from being overwritten.
1 Turning on the MY TEXT PASSWORD
1-1 Use the ▲/▼ buttons on the SECURITY menu to
select the MY TEXT PASSWORD and press the
► button to display the MY TEXT PASSWORD
on/off menu.
1-2 Use the ▲/▼ buttons on the MY TEXT
PASSWORD on/off menu to select ON. The
ENTER NEW PASSWORD box (small) will
be displayed.
1-3 Use the ▲/▼/◄/► buttons to enter the
password. Move the cursor to the right side
of the ENTER NEW PASSWORD box (small)
and press the ► button to display the NEW
PASSWORD AGAIN box, and then enter the
same password again.
ENTER NEW PASSWORD
box (small)
1-4 Move the cursor to the right side of the
NEW PASSWORD AGAIN box and press
► button to display the NOTE NEW
PASSWORD box for about 30 seconds, then
please make note of the password during
this time.
MY TEXT
PASSWORD
Pressing the ENTER button on the remote control or ► button on the
projector will return to the MY TEXT PASSWORD on/off menu.
2 Turning off the MY TEXT PASSWORD
2-1 Follow the procedure in 1-1 to display the MY TEXT PASSWORD on/off
menu.
2-2 Select OFF to display the ENTER
PASSWORD box (large). Enter the
registered password and the screen will
return to the MY TEXT PASSWORD on/off
menu.
ENTER PASSWORD box
(large)
If an incorrect password is input, the menu will close.
If necessary, repeat the process from 2-1
3 If you have forgotten your password
3-1 Follow the procedure in 1-1 to display the MY TEXT PASSWORD on/off
menu.
3-2 Select OFF to display the ENTER PASSWORD box (large). The 10 digit
inquiring code will be displayed inside the box.
3-3 Contact your dealer with the 10 digit inquiring code. Your password will
be sent after your user registration information is confirmed.
(continued on next page)
60
Download from Www.Somanuals.com. All Manuals Search And Download.
SECURITY menu
Item
Description
(1) Use the ▲/▼ buttons on the SECURITY menu to
select the MY TEXT DISPLAY and press the ►
button to display the MY TEXT DISPLAY on/off
menu.
(2) Use the ▲/▼ buttons on the MY TEXT DISPLAY on/off menu to select
on or off.
ON
OFF
ó
MY TEXT
DISPLAY
When it is set ON, the MY TEXT will be displayed
on the START UP screen and the INPUT_
INFORMATION when the INFORMATION on the
SERVICE menu is chosen.
• This function is available only when the MY TEXT
PASSWORD function is set to the OFF.
(1) Use the ▲/▼ buttons on the
SECURITY menu to select the MY
TEXT WRITING and press the ►
button. The MY TEXT WRITING dialog
will be displayed.
(2) The current MY TEXT will be displayed
on the first 3 lines. If not yet written, the
lines will be blank.
Use the ▲/▼/◄/► buttons and the
ENTER or INPUT button to select and
enter characters. To erase 1 character
at one time, press the RESET button or
press the ◄ and INPUT button at the
same time. Also if you move the cursor
to DELETE or ALL CLEAR on screen
and press the ENTER or INPUT button,
1 character or all characters will be
MY TEXT
WRITING
erased. The MY TEXT can be input up
to 24 characters on each line.
(3) To change an already inserted
character, press the ▲/▼ button to
move the cursor to one of the first 3
lines, and use the ◄/► buttons to
move the cursor on the character to be
changed.
After pressing the ENTER or INPUT button, the character is selected.
Then, follow the same procedure as described at the item (2) above.
(4) To finish entering text, move the cursor to the OK on screen and press
the ►, ENTER or INPUT button. To revert to the previous MY TEXT
without saving changes, move the cursor to the CANCEL on screen and
press the ◄, ENTER or INPUT button.
The MY TEXT WRITING function is available only when the MY TEXT
PASSWORD function is set to OFF.
•
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Maintenance
Replacing the lamp
A lamp has finite product life. Using the lamp for long periods of time could cause
the pictures darker or the color tone poor. Note that each lamp has a different
lifetime, and some may burst or burn out soon after you start using them.
Preparation of a new lamp and early replacement are recommended. To prepare
a new lamp, make contact with your dealer and tell the lamp type number.
Type number : 456-8755H
lamp cover
3
Replacing the lamp
Turn the projector off, and unplug the power cord.
Allow the projector to cool for at least 45 minutes.
1.
Prepare a new lamp. If the projector is mounted on
a ceiling, or if the lamp has broken, also ask the
dealer to replace the lamp.
2.
In case of replacement by yourself, follow the following procedure.
Loosen the screw (marked by arrow) of the lamp
cover and then slide and lift the lamp cover to the
side to remove it.
3.
Loosen the 3 screws (marked by arrow) of the lamp,
and slowly pick up the lamp by the handles. Never
loosen any other screws.
4.
4
Handles
Insert the new lamp, and retighten firmly the 3
screws of the lamp that are loosened in the previous
process to lock it in place.
5.
While putting the interlocking parts of the lamp cover
and the projector together, slide the lamp cover back in
place. Then firmly fasten the screw of the lamp cover.
6.
Turn the projector on and reset the lamp time using
the LAMP TIME item in the OPTION menu.
(1) Press the MENU button to display a menu.
(2) Point at the ADVANCED MENU in the menu using
the ▼/▲ button, then press the ► button.
7.
6
(3) Point at the OPTION in the left column of the menu
using the ▼/▲button, then press the ► button.
(4) Point at the LAMP TIME using the ▼/▲ button, then press the ► button. A dialog will appear.
(5) Press the ► button to select “OK” on the dialog. It performs resetting the lamp time.
CAUTION ►Do not touch any inner space of the projector, while the lamp
is taken out.
NOTE • Please reset the lamp time only when you have replaced the lamp,
for a suitable indication about the lamp.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Replacing the lamp (continued)
Lamp warning
HIGH TEMPERATURE
HIGH PRESSURE
HIGH VOLTAGE
WARNING ►The projector uses a high-pressure mercury glass lamp. The
lamp can break with a loud bang, or burn out, if jolted or scratched, handled
while hot, or worn over time. Note that each lamp has a different lifetime, and
some may burst or burn out soon after you start using them. In addition, when
the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and
for gas containing mercury to escape from the projector’s vent holes.
►About disposal of a lamp: This product contains a mercury lamp; do not put
it in a trash. Dispose of it in accordance with environmental laws.
• For product disposal, consult your local government agency
For more information, call your dealer.
• If the lamp should break (it will make a loud bang when it does),
unplug the power cord from the outlet, and make sure to request a
replacement lamp from your local dealer. Note that shards of glass
could damage the projector’s internals, or cause injury during handling,
so please do not try to clean the projector or replace the lamp yourself.
• If the lamp should break (it will make a loud bang when it does),
Disconnect
the plug
from the
power
ventilate the room well, and make sure not to breathe the gas that
comes out of the projector vents, or get it in your eyes or mouth.
• Before replacing the lamp, turn the projector off and unplug the power
outlet
cord, then wait at least 45 minutes for the lamp to cool sufficiently.
Handling the lamp while hot can cause burns, as well as damaging the lamp.
• Never unscrew except the appointed (marked by an arrow) screws.
• Do not open the lamp cover while the projector is suspended from
a ceiling. This is dangerous, since if the lamp’s bulb has broken, the
shards will fall out when the cover is opened. In addition, working in
high places is dangerous, so ask your local dealer to have the lamp
replaced even if the bulb is not broken.
• Do not use the projector with the lamp cover removed. At the lamp
replacing, make sure that the screws are screwed in firmly. Loose
screws could result in damage or injury.
• Use only the lamp of the specified type.
• If the lamp breaks soon after the first time it is used, it is possible
that there are electrical problems elsewhere besides the lamp. If this
happens, consult your local dealer or a service representative.
•
Handle with care: jolting or scratching could cause the lamp bulb to burst during use.
• Using the lamp for long periods of time, could cause it dark, not to light
up or to burst. When the pictures appear dark, or when the color tone is
poor, please replace the lamp as soon as possible. Do not use old (used)
lamps; this is a cause of breakage.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Cleaning and replacing the air filter
The air filter unit of this projector consists of a filter cover, two kinds of filters, and
a filter frame. The new double large filters system is expected to function longer.
However, please check and clean it periodically to keep ventilation needed for
normal operation of the projector.
When the indicators or a message prompts you to clean the air filter, comply with
it as soon as possible. Replace the filters when they are damaged or too soiled.
To prepare new filters, make contact with your dealer and tell the following type
number.
Type number : MU06481 (Filter set)
When you replace the lamp, please replace the air filter. An air filter of specified
type will come together with a replacement lamp for this projector.
Filter cover
Turn the projector off, and unplug the power cord.
Allow the projector to sufficiently cool down.
2
3
1.
2. Use a vacuum cleaner on and around the filter cover.
While supporting the projector with one hand, use
3.
your other hand to pull the filter cover forward in the
direction of the arrow.
Use a vacuum cleaner for the filter vent of the
projector and the outer side of the filter unit.
4.
5. Take the filters out while holding the filter cover.
Filter unit
Use a vacuum cleaner on both sides of the filters.
4
6.
When vacuuming up the fine meshed filter, hold it
so it will not be sucked in. If the filters are damaged
or heavily soiled, replace them with the new ones.
Filter cover
Put the filters back into the filter cover.
7.
Put the coarse meshed filter into a filter cover
first. Then put the fine meshed filter on the coarse
meshed one, turning its stitched side up.
7
8. Put the filter unit back into the projector.
Filter (coarse meshed)
Filter (fine meshed)
Stitched
side
(continued on next page)
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Cleaning and replacing the air filter (continued)
Turn the projector on and reset the filter time using the FILTER TIME item in
the EASY MENU.
(1) Press the MENU button to display a menu.
(2) Point at the FILTER TIME using the ▼/▲ button, then press the ► button.
A dialog will appear.
9.
(3) Press the ► button to select “OK” on the dialog. It performs resetting the
filter time.
WARNING ►Before taking care of the air filter, make sure the power cable
is not plugged in, then allow the projector to cool sufficiently. Taking care of the
air filter in a high temperature state of the projector could cause an electric shock,
a burn or malfunction to the projector.
►Use only the air filter of the specified type. Do not use the projector without the
air filter or the filter cover. It could result in a fire or malfunction to the projector.
►Clean the air filter periodically. If the air filter becomes clogged by dust or the
like, internal temperatures rise and could cause a fire, a burn or malfunction to
the projector.
NOTE • Please replace the air filter when it is damaged or heavily soiled.
• When you replace the projection lamp, please replace the air filter. An air filter
of specified type will come together with a replacement lamp for this projector.
• Please reset the filter time only when you have cleaned or replaced the air
filter, for a suitable indication about the air filter.
• The projector may display the message such as “CHECK THE AIR FLOW” or
turn off the projector, to prevent the internal heat level rising.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Replacing the internal clock battery
This projector has internal clock that uses a battery. When the clock of the network
function does not work correctly, please try solution by replacement of the battery:
HITACHI MAXELL, part number CR2032 or CR2032H.
Slot Cover
Turn the projector off, and unplug the power cord.
Allow the projector to cool sufficiently.
1.
After making sure that the projector has cooled
adequately, pull the slot cover forward, pushing
slightly its edge up, and remove it from the projector.
Battery Slot
2.
Remove the battery case.
Hold the battery case gutter by finger nail or other thing
and pull out the battery case slowly from the battery slot.
While the projector is installed upside down, such
as a ceiling mount, please remember the battery will
drop down as soon as pulling the battery case out.
3.
Take the old battery out from the battery case.
Battery Case
Battery
4.
5.
Replace a new battery.
Put a new battery into battery case. Please make
sure that the + is facing upward. Insert the battery case
slowly into the battery slot until you hear the snap.
Battery
Case
Battery (+)
Close the slot cover.
Replace the slot cover by reversing the procedure
used when removing the cover.
6.
Battery
Case
Battery (-)
NOTE • The internal clock will be initialized by removing the battery. For
setting the clock, see the User's Manual - Network Guide.
WARNING ►Be careful of handling a battery, as a battery can cause
explosion, cracking or leakage, which could result in a fire, an injury, and
environment pollution.
• Use only the specified and perfect battery. Do not use a battery with damage,
such as a scratch, a dent, rust or leakage.
• When replacing the battery, replace it with a new battery.
•
When a battery leaked, wipe the leakage out well with a waste cloth. If the
leakage adhered to your body, immediately rinse it well with water. When a battery
leaked in the battery holder, replace the batteries after wiping the leakage out.
•
Make sure the plus and minus terminals are correctly aligned when loading a battery.
• Do not work on a battery; for example recharging or soldering.
• Keep a battery in a dark, cool and dry place. Never expose a battery to a fire
or water.
• Keep a battery away from children and pets. Be careful for them not to
swallow a battery.
• Obey the local laws on disposing a battery.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Other care
Inside of the projector
In order to ensure the safe use of your projector, please have it cleaned and
inspected by your dealer about once every year.
Caring for the lens
If the lens is flawed, soiled or fogged, it could cause deterioration of display
quality. Please take care of the lens, being cautious of handling.
Turn the projector off, and unplug the power cord. Allow the projector to cool
sufficiently.
1.
After making sure that the projector is cool adequately, lightly wipe the lens
with a commercially available lens-cleaning wipe. Do not touch the lens
directly with your hand.
2.
Caring for the cabinet and remote control
Incorrect care could have adverse influence such as discoloration, peeling paint,
etc.
Turn the projector off, and unplug the power cord. Allow the projector to cool
sufficiently.
1.
After making sure that the projector is cool adequately, lightly wipe with gauze
or a soft cloth.
If the projector is extremely dirty, dip soft cloth in water or a neutral cleaner
diluted in water, and wipe lightly after wringing well. Then, wipe lightly with a
soft, dry cloth.
2.
WARNING ►Before caring, make sure the power cord is not plugged in,
and then allow the projector to cool sufficiently. The care in a high temperature
state of the projector could cause a burn and/or malfunction to the projector.
►Never try to care for the inside of the projector personally. Doing is so
dangerous.
►Avoid wetting the projector or inserting liquids in the projector. It could result in
a fire, an electric shock, and/or malfunction to the projector.
• Do not put anything containing water, cleaners or chemicals near the projector.
• Do not use aerosols or sprays.
CAUTION ►Please take right care of the projector according to the
following. Incorrect care could cause not only an injury but adverse influence
such as discoloration, peeling paint, etc.
►Do not use cleaners or chemicals other than those specified in this manual.
►Do not polish or wipe with hard objects.
NOTICE ►Do not directly touch the lens surface with hands.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Troubleshooting
If an abnormal operation should occur, stop using the projector immediately.
WARNING ►Never use the projector if abnormal operations such as smoke,
strange odor, excessive sound, damaged casing or elements or cables, penetration
of liquids or foreign matter, etc. should occur. In such cases, immediately disconnect
the power plug from the power outlet. After making sure that the smoke or odor has
stopped, contact to your dealer or service company.
Otherwise if a problem occurs with the projector, the following checks and measures are
recommended before requesting repair.
If this does not resolve the problem, please contact your dealer or service company. They
will tell you what warranty condition is applied.
Related messages
When some message appears, check and cope with it according to the following table.
Although these messages will be automatically disappeared around several minutes, it will
be reappeared every time the power is turned on.
Message
Description
There is no input signal.
Please confirm the signal input connection, and the status
of the signal source.
The horizontal or vertical frequency of the input signal
is not within the specified range.
Please confirm the specs for your projector or the signal
source specs.
An improper signal is input.
Please confirm the specs for your projector or the signal
source specs.
The internal temperature is rising.
Please turn the power off, and allow the projector to cool
down at least 20 minutes. After having confirmed the
following items, please turn the power ON again.
• Is there blockage of the air passage aperture?
• Is the air filter dirty?
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after the remedy, please set
FAN SPEED of the SERVICE item in the OPTION menu to HIGH.
A note of precaution when cleaning the air filter.
Please immediately turn the power off, and clean or change
the air filter referring to the “Cleaning and replacing the
air filter” section of this manual. After you have cleaned or
changed the air filter, please be sure to reset the filter timer
(
44).
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Regarding the indicator lamps
When operation of the LAMP, TEMP and POWER indicators differs from usual,
check and cope with it according to the following table.
POWER
indicator indicator indicator
LAMP
TEMP
Description
Lighting
In Orange
Turned
off
Turned
off
The projector is in a standby state.
Please refer to the section “Power on/off”.
Blinking
In Green
Turned
off
Turned
off
The projector is warming up.
Please wait.
Lighting
In Green
Turned
off
Turned
off
The projector is in an on state.
Ordinary operations may be performed.
Blinking
In Orange
Turned
off
Turned
off
The projector is cooling down.
Please wait.
The projector is cooling down. A certain error
has been detected.
Please wait until POWER indicator finishes blinking,
and then perform the proper measure using the item
descriptions below.
Blinking
In Red
(discre- (discre-
tionary) tionary)
The lamp does not light, and there is a possibility
that interior portion has become heated.
Please turn the power off, and allow the projector to
cool down at least 20 minutes. After the projector has
sufficiently cooled down, please make confirmation of
Blinking
In Red
or
Lighting
In Red
Lighting Turned the following items, and then turn the power on again.
In Red
off
• Is there blockage of the air passage aperture?
• Is the air filter dirty?
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after the remedy,
please change the lamp referring to the section
“Replacing the lamp”.
The lamp cover has not been properly fixed.
Please turn the power off, and allow the projector to
cool down at least 45 minutes. After the projector has
Blinking
In Red
or
Lighting
In Red
Blinking Turned sufficiently cooled down, please make confirmation of
In Red
off
the attachment state of the lamp cover. After performing
any needed maintenance, turn the power on again.
If the same indication is displayed after the remedy,
please contact your dealer or service company.
The cooling fan is not operating.
Please turn the power off, and allow the projector to
cool down at least 20 minutes. After the projector has
Turned Blinking sufficiently cooled down, please make confirmation
Blinking
In Red
or
Lighting
In Red
off
In Red that no foreign matter has become caught in the fan,
etc., and then turn the power on again.
If the same indication is displayed after the remedy,
please contact your dealer or service company.
(Continued on next page)
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Regarding the indicator lamps (continued)
POWER
indicator indicator indicator
LAMP
TEMP
Description
There is a possibility that the interior portion
has become heated.
Please turn the power off, and allow the projector to cool down at least
20 minutes. After the projector has sufficiently cooled down, please make
confirmation of the following items, and then turn the power on again.
• Is there blockage of the air passage aperture?
• Is the air filter dirty?
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after the remedy, please set FAN
Blinking
In Red
or
Lighting
Turned Lighting
off
In Red
In Red
SPEED of SERVICE item in OPTION menu to HIGH
.
46)
(
It is time to clean the air filter.
Please immediately turn the power off, and clean or
change the air filter referring to the section “Cleaning
and replacing the air filter”. After cleaning or changing
the air filter, please be sure to reset the filter timer.
After the remedy, reset the power to ON.
Lighting
In Green
Simultaneous
blinking in Red
There is a possibility that the interior portion
has become overcooled.
Please use the unit within the usage temperature
parameters (5°C to 35°C).
Lighting
In Green
Alternative
blinking in Red
After the treatment, reset the power to ON.
Blinking In
At least 1 Power ON schedule is saved to the
Green for Turned
Turned projector.
approx. 3
seconds.
off
off
Please refer to "Schedule Settings" section of User’s
Manual - Network Guide.
NOTE • When the interior portion has become overheated, for safety purposes,
the projector is automatically shut down, and the indicator lamps may also be
turned off. In such a case, disconnect the power cord, and wait at least 45 minutes.
After the projector has sufficiently cooled down, please make confirmation of the
attachment state of the lamp and lamp cover, and then turn the power on again.
Shutdown switch
Shutting the projector down
Only when the projector can not be turned off by usual
procedure (15), please push the shutdown switch using
a pin or similar, and disconnect the power plug from the
power outlet. Before turning it on again, wait at least 10
minutes to make the projector cool down enough.
Resetting all settings
When it is hard to correct some wrong settings, the FACTORY RESET function of
SERVICE item in OPTION menu (50) can reset all settings(except LANGUAGE,
FILTER TIME, LAMP TIME, FILTER MESSAGE, NETWORK and SECURITY
settings and etc.) to the factory default.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects
About the phenomenon confused with a machine defect, check and cope with it
according to the following table.
Reference
page
Phenomenon
Cases not involving a machine defect
The electrical power cord is not plugged in.
Correctly connect the power cord.
12
The main power source has been interrupted during
operation such as by a power outage (blackout), etc.
Please disconnect the power plug from the power outlet,
and allow the projector to cool down at least 10 minutes,
then turn the power on again.
12, 15
62, 63
Power does not
come on.
Either there is no lamp and/or lamp cover, or either
of these has not been properly fixed.
Please turn the power off and disconnect the power plug from
the power outlet, and allow the projector to cool down at least
45 minutes. After the projector has sufficiently cooled down,
please make confirmation of the attachment state of the lamp
and lamp cover, and then turn the power on again.
The signal cables are not correctly connected.
Correctly connect the connection cables.
9
–
Signal source does not correctly work.
Correctly set up the signal source device by referring to the
manual of the source device.
Neither sounds
nor pictures are
outputted.
The input changeover settings are mismatched.
Select the input signal, and correct the settings.
16, 17
The BLANK function for pictures and the MUTE
function for sounds are working.
AV MUTE may be active.
16, 22,
45
Refer to the item “Sound does not come out” and “No
pictures are displayed” on the next page to turn off the
MUTE and BLANK functions.
(Continued on next page)
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continued)
Reference
page
Phenomenon
Cases not involving a machine defect
The signal cables are not correctly connected.
Correctly connect the audio cables.
9
The MUTE function is working.
Restore the sound pressing MUTE or VOLUME +/- button
on the remote control.
16
16
37
Sound does not
come out.
The volume is adjusted to an extremely low level.
Adjust the volume to a higher level using the menu function
or the remote control.
The AUDIO SOURCE/SPEAKER setting is not correct.
Correctly set the AUDIO SOURCE/SPEAKER in AUDIO
menu.
The lens cover is attached.
Remove the lens cover.
3
9
The signal cables are not correctly connected.
Correctly connect the connection cables.
The brightness is adjusted to an extremely low level.
Adjust BRIGHTNESS to a higher level using the menu
function.
27
11
No pictures are
displayed.
The computer cannot detect the projector as a plug
and play monitor.
Make sure that the computer can detect a plug and play
monitor using another plug and play monitor.
The BLANK screen is displayed.
Press BLANK button on the remote control.
22
22
The FREEZE function is working.
Press FREEZE button to restore the screen to normal.
Video screen
display freezes.
Color settings are not correctly adjusted.
Perform picture adjustments by changing the COLOR
TEMP, COLOR, TINT and/or COLOR SPACE settings,
using the menu functions.
Colors have a
faded- out
appearance, or
Color tone is
poor.
28, 32
COLOR SPACE setting is not suitable.
Change the COLOR SPACE setting to AUTO, RGB,
SMPTE240, REC709 or REC601.
32
(Continued on next page)
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continued)
Reference
page
Phenomenon
Cases not involving a machine defect
The brightness and/or contrast are adjusted to an
extremely low level.
Adjust BRIGHTNESS and/or CONTRAST settings to a
higher level using the menu function.
27
The ECO MODE function is working.
Select NORMAL for the ECO MODE item in the SETUP
menu.
Pictures appear
dark.
35
The lamp is approaching the end of its product
lifetime.
62, 63
Replace the lamp.
Either the focus and/or horizontal phase settings are
not properly adjusted.
Adjust the focus using the focus ring, and/or H PHASE
using the menu function.
19, 31
Pictures appear
blurry.
The lens is dirty or misty.
Clean the lens referring to the section “Caring for the lens”.
67
36
The SAVING function is working.
Select NORMAL for STANDBY MODE item in the SETUP
menu.
RS-232C does
not work.
The COMMUNICATION TYPE for the CONTROL port is
set to NETWORK BRIDGE.
48
36
48
36
Select OFF for COMMUNICATION TYPE item in the
OPTION - SERVICE - COMMUNICATION menu.
The SAVING function is working.
Select NORMAL for STANDBY MODE item in the SETUP
menu.
Network does
not work
NETWORK
BRIDGE
function does
not work
The NETWORK BRIDGE function is turned off.
Select NETWORK BRIDGE for COMMUNICATION TYPE
item in the OPTION - SERVICE - COMMUNICATION menu.
The SAVING function is working.
Select NORMAL for STANDBY MODE item in the SETUP
menu.
Schedule
function does
not work
NOTE • Although bright spots or dark spots may appear on the screen, this
is a unique characteristic of liquid crystal displays, and it does not constitute or
imply a machine defect.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Specifications
Specification
Item
Specification
Product name
Liquid Crystal Panel
Lens
Liquid crystal projector
786,432 pixels (1024 horizontal x 768 vertical)
Zoom lens, f = 19 ~ 23 mm (approximately)
Lamp
210W UHP
Speaker
16W
Power supply
Power consumption
Temperature range
AC 100-120V/3.7A, AC220-240V/1.8A
330 W
5 ~ 35°C (Operating)
317 (W) x 118 (H) x 288 (D) mm
* Not including protruding parts. Please refer to the following figure.
Size
Weight (mass)
approx. 4.0kg
Computer input port
COMPUTER IN1 ................................D-sub 15 pin mini x1
COMPUTER IN2 ................................D-sub 15 pin mini x1
Computer output port
MONITOR OUT ...................................D-sub 15 pin mini x1
Video input port
Y, Cb/Pb, Cr/Pr (Component video) ........................ RCA x3
S-VIDEO...................................................mini DIN 4 pin x1
VIDEO ..................................................................... RCA x1
Audio input/output port
Ports
AUDIO IN1.....................................................Stereo mini x1
AUDIO IN2.....................................................Stereo mini x1
AUDIO IN3 (R, L)..................................................... RCA x2
AUDIO OUT (R, L)................................................... RCA x2
Others
USB......................................................................USB-B x1
CONTROL.................................................... D-sub 9 pin x1
LAN ....................................................................... RJ45 x1
Lamp: 456-8755H
Filter set: MU06481
Mounting accessary: HAS-3010 (Bracket for ceiling mount)
HAS-204L (Fixing adaptor for low ceilings)
Optional parts
HAS-304H (Fixing adaptor for high ceilings
)
Soft case: CA3010
* For more information, please consult your dealer.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Specifications (continued)
317
[unit: mm]
75
Download from Www.Somanuals.com. All Manuals Search And Download.
|