Installation and
Operating Instructions
08/18964/0 - Issue 0
Key Switch
Model No. KX03001
DIMENSIONS (millimetres)
70mm
35mm
Important Safety Advice
•
Do not use this appliance in the
immediate surroundings of a bath, a
shower or swimming pool.
•
•
•
Do not use where excessive dust or
moisture is present.
This unit must only be used on an
A.C. Mains supply of 230/240V.
For use in normal pollution situations
only.
THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE
GENERAL DESCRIPTION
Note 1:
The KX03001 can be used in conjunction with the
Dimplex PLX, SPX, EVS, EVX, RPX and Calidou
panel heaters. The unit is designed to be flush
mounted to a single BS backing box using the
adaptor plate provided. The unit comprises 2 x 20
Amp (250VAC) rated single pole changeover
mechanisms, together with a neon that is
designed to provide an easily visible backlit card
pocket.
When the fob is removed a neon will light to aid the
user, whether used in On/Off or Pilot Wire
installations.
Note 2:
This unit contains a second 20 Amp rated
mechanism to allow another device to be switched
(e.g. lighting).
OPERATING INSTRUCTIONS
INSTALLATION
Dependant on the heater used and wiring, the
KX03001 can operate in either On/Off switching
mode, or in Pilot Wire mode when used with a
suitable heater.
Before undertaking installation work, ensure the
electricity supply is disconnected from any fixed
wiring.
•
All wiring should be carried out by a qualified
Electrician in accordance with the current IEE
Wiring Regulations.
ON/OFF SWITCHING
Using the key fob provided, place the fob into the
pouch to switch the heater On. Removing the fob
isolates the power and turns the heater Off.
•
•
This unit is designed for fitting to a standard
single BS backing box with a depth of 25mm.
Please ensure the top and bottom lugs are
removed, if fitted, from metal wall boxes prior to
fitting.
PILOT WIRE SWITCHING
Using the key fob provided, place the fob into the
pouch to switch the heater to its comfort
temperature setting. Removing the fob switches
the heater to its background temperature
setting when the room is unoccupied.
•
•
Ensure that there is adequate space for wiring.
Please see the following diagrams for your
chosen connection type (On/Off, Pilot Wire).
CONTINUED OVERLEAF
Download from Www.Somanuals.com. All Manuals Search And Download.
|