| SMT Power Inductor   SIW75 Type   Features   RoHS compliant.   Small size (7.3mm*7.3mm), low profile (5.2mm max. height) SMD type.   Suitable for high density mounting.   High energy storage and low DCR.   Provided with embossed carrier tape packing.   Idel for power source circuits, DC-DC converter,   DC-AC inverters inductor application.   In addition to the standard versions shown here,   customized inductors are available to meet your exact requirements.   RECOMMENDED PAD PATTERNS   Mechanical Dimension:   3.0   F C UNIT:mm/inch   2.0   E D A = 7.6/ 0.299 Max.   B = 7.6 /0.299 Max.   C = 5.2 / 0.205 Max.   D = 5.3 0.1 / 0.209 0.004   E = 1.0 0.1 / 0.039 0.004   F = 2.0 / 0.079   4.3   A B Electrical Characteristics: 25oC: 100KHz, 0.1V   2 1 L DCR   (m ) MAX   Irated   (Adc)   PART NO.   471   391   (uH)   SIW75 - 1R0   SIW75 - 1R5   SIW75 - 2R2   SIW75 - 3R3   SIW75 - 4R7   SIW75 - 6R8   SIW75 - 100   SIW75 - 120   SIW75 - 150   SIW75 - 180   SIW75 - 220   SIW75 - 270   SIW75 - 330   SIW75 - 390   SIW75 - 470   SIW75 - 560   SIW75 - 680   SIW75 - 820   SIW75 - 101   SIW75 - 121   SIW75 - 151   SIW75 - 181   SIW75 - 221   SIW75 - 271   SIW75 - 331   SIW75 - 391   SIW75 - 471   1.0   1.5   0.023   0.028   0.032   0.038   0.049   0.060   0.070   0.080   0.090   0.100   0.120   0.140   0.160   0.190   0.220   0.290   0.340   0.460   0.550   0.670   0.900   1.050   1.350   1.550   2.050   2.300   2.600   2.90   2.60   2.40   2.20   1.90   1.70   1.60   1.50   1.40   1.30   1.20   1.10   1.00   0.91   0.84   0.72   0.66   0.58   0.51   0.42   0.37   0.35   0.29   0.28   0.23   0.21   0.19   331   271   221   181   151   121   101   820   680   560   470   390   330   270   2.2   3.3   100.00   10.00   1.00   4.7   6.8   10.0   12.0   15.0   18.0   22.0   27.0   33.0   39.0   47.0   56.0   68.0   82.0   100.0   120.0   150.0   180.0   220.0   270.0   330.0   390.0   470.0   220   180   150   120   100   6R8   4R7   3R3   2R2   1R5   1R0   0.00   0.01   0.10   1.00   10.00   CURRENT (A)   1. Tolerance of inductance: 20% for 1.0~6.8uH, 10% for 10~470uH.   2. Irated is the DC current which cause the inductance drop 10% typical of its nominal inductance without current   and the surface temperature of the part increase less than 45oC.   3. Operating temperature : -20oC to 105oC (including self-temperature rise).   DELTA ELECTRONICS, INC.   (TAOYUAN PLANT CPBG)   252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.   TEL: 886-3-3591968; FAX: 886-3-3591991   64   Download from Www.Somanuals.com. All Manuals Search And Download.   |