Air DWL-810
2.4GHz Ethernet-to-Wireless Bridge
Manual
Rev. 070802
Building Networks for People
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Package Contents
Contents of Package:
•
•
•
•
•
D-Link Air DWL-810 Ethernet-to-Wireless Bridge
AC Power Adapter – 5V; 2.5A
Manual on CD
Ethernet Cable
Quick Installation Guide
If any of the above items are missing, please contact your reseller.
System Requirements:
•
•
A device, such as a game console, laptop or desktop computer,
network printer or set-top box, with an available Ethernet port
A current web-browser (e.g., Internet Explorer 5.x or Netscape
Navigator 4.x) for configuration
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Introduction
The D-Link Air DWL-810 Ethernet-to-Wireless Bridge is a device that can be
implemented in a variety of ways to provide wireless access by converting
an Ethernet connection. For devices with a built-in Ethernet port, the DWL-
810 provides a cost effective way to gain wireless connectivity, virtually
transforming wired devices into wireless units! Connect any Ethernet-
enabled device to an existing 802.11b wireless network using the DWL-810.
Typical applications include connecting a printer to a wireless network, and
connecting Ethernet-enabled devices such as game consoles or set-top
boxes to the Wireless Local Area Network (WLAN). Simply connect the
DWL-810 to the Ethernet port (RJ-45) of a network device, such as a
network storage device, Internet camera, network printer, network scanner,
or other similar device. Using the DWL-810 allows flexibility of placing
network devices in remote locations but still maintains the advantage of
High-Speed connection.
When the DWL-810 is used to connect to another DWL-810, there is no
configuration required. For example, install the DWL-810 into a network
device such as a web camera. The camera will automatically communicate
with a wireless adapter-equipped (DWL-650+) laptop that is also set to Ad-
Hoc mode.
This manual provides a quick introduction to wireless technology and its
application as it relates to networking. Please take a moment to read
through this manual and get acquainted with wireless technology.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and Benefits
•
•
Transforms an Ethernet port into a wireless connection
Fast 11Mbps wireless connection which is fully compatible with
standard 802.11b-compliant devices
•
•
•
•
•
•
Equipped with a 10Base-T Ethernet port
Easy and Fast Wireless connectivity for Ethernet devices
Supports Ad Hoc or Infrastructure modes
Easy web-based configuration when changing settings
Easy software upgrades
Encryption ensures security
LEDs
LED stands for Light-Emitting Diode. The DWL-810 has two LEDs:
Wireless Link/Act – a steady Orange light
indicates a good wireless connection. A
blinking light indicates that the DWL-810 is
receiving/transmitting from/to the wireless
network.
Power – a steady Green light indicates a
proper connection to a power source.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Ethernet Port – an RJ-45 jack
provides connection to a network
device using a Cat 5 Ethernet
cable. (Use the included
Cross-Over CAT5 cable when
connecting to another Ethernet
adapter, like the port in a gaming
console; use a Straight-Through
CAT5 cable when connecting to a
switch.)
Reset Button
Power Receptor
Ethernet Port
Reset Button – press this button to revert to the factory default settings of
the DWL-810
Power Receptor – connect one end of the included 5V DC Power Adapter
into the power receptor on the DWL-810 and connect the other end of the
Power Adapter to a power outlet.
Category 5 is the most reliable grade of twisted-pair cable. It is either Straight-
Through cable or Cross-Over cable. Always check your installation instructions
to make sure that you have selected the correct type of Category 5 cable.
For the DWL-810, you will use Cross-Over cable to connect to a computer
for configuration and to connect to any device with an Ethernet adapter.
Use a Straight-Through cable to connect the DWL-810 directly to a switch.
Default Settings
Operating Mode
Ad-Hoc
SSID
default
Channel
6
Transmission rates
Encryption
IP Address
IP Subnet
Auto
Disabled
192.168.0.30
255.255.255.0
Admin (all lower case)
None (leave field blank)
User Name
Password
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Wireless Basics
With the DWL-810 you can provide instant wireless access to the LAN (Local
Area Network) for Ethernet-enabled devices. Simply plug the DWL-810 into
the Ethernet port of a network device (such as a printer or web camera) for
an immediate wireless connection with another device equipped with a
wireless network adapter set to Ad-Hoc mode.
If you are planning a larger wireless network, D-Link can supply most of your
wireless local area network needs. In this section, we discuss typical
wireless local area networks (WLANs) and their components. Much of the
advice given here may be helpful in setting up the DWL-810. It may also
give you some ideas, if you plan to expand your wireless network.
D-Link Air and AirPlus wireless products are based on industry standards to
provide easy-to-use and compatible high-speed wireless connectivity within
your home, business or wherever a wireless network is available. Strictly
adhering to the IEEE 802.11b standard, the D-Link Air and AirPlus family of
wireless products will allow you to access the data you want, when and
where you want it. No longer will you be limited to one location or forced to
run new wiring through your home or office. You will be able to enjoy the
freedom that wireless networking delivers.
A wireless local area network (WLAN) is a cellular computer network that
transmits and receives data with radio signals instead of wires. Wireless
LANs are used increasingly in both home and office environments, and
public areas such as airports, coffee shops and universities. Innovative ways
to utilize WLAN technology are helping people to work and communicate
more efficiently. Increased mobility with the absence of cabling and other
fixed infrastructure has proven to be beneficial for many users.
Wireless users can use the same applications they use on a wired network.
Wireless adapter cards used on laptop and desktop systems, support the
same protocols as Ethernet adapter cards. For most users, there is no
noticeable functional difference between a wired Ethernet desktop computer
and a wireless computer equipped with a wireless adapter other than the
added benefit of the ability to roam within a wireless-cell. Under many
circumstances, it may be desirable for mobile network devices to link to a
conventional Ethernet LAN in order to use servers, printers or an Internet
connection supplied through the wired LAN. A Wireless Access Point (AP) is
one device used to provide this link.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless Basics
Now, without an Access Point, or a wireless LAN, you can access a network
device (such as a network printer, network scanner, web camera or gaming
consoles) wirelessly, quickly and easily, with no need for configuration using
the DWL-810.
People use wireless LAN technology for many different purposes.
Mobility - Productivity increases when people have access to data in any
location within the operating range of the WLAN. Management decisions
based on real-time information can significantly improve worker efficiency.
Low Implementation Costs – WLANs (Wireless Local Area Networks) are
easy to set up, manage, change and relocate. Networks that frequently
change, both physically and logically, can benefit from WLANs ease of
implementation. WLANs can operate in locations where installation of wiring
may be impractical.
Installation Speed and Simplicity - Installing a wireless LAN system can
be fast and easy and can eliminate the need to install cable through walls
and ceilings.
Network Expansion - Wireless technology allows the network to go where
wires cannot go.
Reduced Cost-of-Ownership - While the initial investment required for
Wireless LAN hardware might be higher than the cost of wired LAN
hardware, overall installation expenses and life-cycle costs will be
significantly lower. Long-term cost benefits are greatest in dynamic
environments requiring frequent moves, adds, and changes.
Scalability - Wireless Local Area Networks (WLANs) can be configured in a
variety of topologies to meet the needs of specific applications and
installations. Configurations are easily changed and range from peer-to-peer
networks suitable for a small number of users to full infrastructure networks
of thousands of users that allow roaming over a broad area.
D-Link Air Wireless Family of LAN products include:
ꢀ 2.4GHz Wireless Cardbus Adapters used with laptop computers
(DWL-650)
ꢀ 2.4GHz Wireless PCI cards used with desktop computers (DWL-520)
ꢀ Wireless USB Adapter (DWL-120)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless Basics
The DWL-810 is fully compatible with the recently introduced D-Link AirPlus
family of products that include:
ꢀ Enhanced 2.4GHz Wireless Cardbus Adapters used with laptop
computers (DWL-650+)
ꢀ Enhanced 2.4GHz Wireless PCI cards used with desktop computers
(DWL-520+)
ꢀ Wireless Access Points (DWL-900AP+)
Standards - Based Technology
The IEEE standard-based technology assures that the D-Link Air Products
are interoperable with existing compatible wireless technology. This means
you will be able to transfer large files quickly or even watch a movie in
MPEG format over your network without noticeable delays. The technology
works by using multiple frequencies in the 2.4GHz range. D-Link Air
products will automatically sense the best possible connection speed to
ensure the greatest speed and range possible with the technology.
Installation Considerations
Designed to go up to 984 feet (300 meters) outdoors and up to 328 feet (100
meters) indoors, the D-Link Air DWL-810 lets you access your network
devices wirelessly from virtually anywhere. Keep in mind, however, that the
number, thickness and location of walls, ceilings or other objects that the
wireless signal must pass thru may limit range. Typical ranges vary
depending on the types of materials and any background RF (radio
frequency) noise in your home or business. The key to maximizing range is
to follow these basic guidelines:
1. Keep the number of walls and ceilings between the DWL-810 and your
receiving device (e.g., the DWL-520+) to a minimum - Each wall or
ceiling can reduce your D-Link Air Wireless product’s range from 3-90
feet (1-30 meters.) Position your DWL-810, Access Points, Residential
Gateways, and computers so that the number of walls or ceilings is
minimized.
2. Be aware of the direct line between the DWL-810 and the device with
which it communicates, as well as between Access Points, Residential
Gateways (routers), and computers. A wall that is 1.5 feet thick (.5
meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick.
At a 2-degree angle it looks over 42 feet (14 meters) thick! Try to make
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless Basics
sure that the Access Points and Adapters are positioned so that the
signal will travel straight through a wall or ceiling for better reception.
3. Building Materials make a difference - A solid metal door or aluminum
studs may have a negative effect on range. Try to position the DWL-810,
the Access Points, and computers with wireless adapters so that the
signal passes through drywall or open doorways and not other materials.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical
devices or appliances that may generate extreme RF noise.
Using radio frequency (RF) technology, the DWL-810 transmits and receives
data over the air, eliminating the need for a wired connection.
4. Getting Started
Setup #1: This example illustrates an Ad-Hoc setup. Simply connect the
DWL-810 (refer to the Quick Installation Guide) to your Ethernet-capable
network device (in this case, a gaming console) and you will automatically
connect wirelessly with other gaming consoles that are connected to a
DWL-810. No configuration is needed in this setup!
Setup #1
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Setup #2: This example illustrates an Infrastructure setup. To connect the
DWL-810 to a wireless network with a switch or router, please refer to the
Quick Installation Guide. Web configuration is required to connect the DWL-
810 in Setup #2.
Setup #2
11
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Web Configuration
No Configuration is needed when you use
the DWL-810 in Ad-Hoc Mode (Setup #1.)
Configuration is required only if you will be using the DWL-810 in
Infrastructure mode. If you will be using the DWL-810 in Infrastructure mode
or if you need to configure the DWL-810, please consider the following
before using the Web Configuration:
You will need a JavaScript-enabled web-browser such as the Internet
Explorer 4.0 or higher, or the Netscape Navigator 4.0 or higher.
The computer that you are using for initial configuration must have
an IP Address within the same range as the IP Address of the DWL-
810. The DWL-810 has a default IP Address of 192.168.0.30 with a
subnet mask of 255.255.255.0
You will need to assign a Static IP Address to the computer that you are
using to configure the DWL-810, within the IP Address Range of the DWL-
810. For example, you can assign a Static IP address of 192.168.0.2 with
a subnet mask of 255.255.255.0 (Please refer to the Appendix section of
the Quick Installation Guide.)
Factory Default Settings for the DWL-810
Operating Mode
Ad-Hoc
SSID
default
Channel
6
Transmission rates
WEP enable
Administrator password
IP Address mode
IP Address
Auto
No
Blank (no password needed)
Static
192.168.0.30
IP Subnet
255.255.255.0
admin (all lower case)
username
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Web Configuration
Access the Web Configuration by opening the web-browser and typing in the
IP Address of the DWL-810.
The DWL-810 default IP Address is
http://192.168.0.30, as shown below:
•
•
Open the web browser
Type in the IP Address
of the DWL-810
Fig. 5.1
(The IP Address shown in the example above is the default setting. Use this IP address when
connecting to a network consisting of other D-Link devices set to their default settings. If you
have changed the IP Address of the DWL-810 to conform to a network other than one with D-
Link devices, at their default setting, then input that IP Address in the web browser, instead of
the default IP Address shown.)
•
•
Type admin
(lower case) in the
User Name field
Leave the
Password field
blank
admin
•
Click OK
Fig. 5.2
Information
The Configuration
window will appear.
Select Information in
the menu, as shown.
The Information
window displays the
current setup status of
the DWL-810.
Fig. 5.3
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Web Configuration
Select Wireless in the menu, as shown. A wireless table will appear as
shown below. The various input fields may be used to configure the 802.11b
wireless and security settings.
Wireless
Fig. 5.4
Operating Mode: Ad-Hoc - is the default setting. Choose Ad-Hoc or
Infrastructure. (Connect right out of the box with the Ad-Hoc setting, when
communicating with another device that is also set to Ad-Hoc.)
SSID: (Service Set Identifier) default is the default setting. The SSID is a
unique name that identifies a network. All devices on a network must share
the same SSID name in order to communicate on the network. If you choose
to change the SSID from the default setting, input the SSID of the Access
Point or the Ad-Hoc wireless workgroup to which you wish to connect.
Channel: Channel 6 is the default channel. Input a new number if you
want to change the default setting. All devices on the network must be set to
the same channel to communicate on the network.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Web Configuration
Transmission Rate: Automatic is the default setting. Choose the
the transmission rate of the DWL-810 from the pull-down menu.
Access Point Density: This field describes the density of the Access
Points and the traffic level of the wireless network running on Infrastructure
Mode, which is determined by the number of Access Points in your wireless
network and the configuration of the Access Points. Use the pull-down
menu to choose from the 3 options: Low, Medium, or High.
WEP Enabled: The default setting is Disable. Wireless network
communications are easily intercepted. WEP (Wired Equivalent Privacy) is
an encryption method specified by the 802.11b standard to make any
intercepted communications extremely difficult to interpret by unauthorized
parties. All devices on the network, and the Access Point, must share the
same WEP selection – either Enable or Disable
To enable WEP Encryption, click on WEP Enable.
WEP Key Length: The default Key Length is 64-bit.
The WEP key is generated from Hexadecimal entries that are either 64 or
128-bit in length. When enabling encryption, select the Key Length, either
64 or 128-bit, and then input the Hexadecimal digits. You can create up to 4
keys.
Hexadecimal digits consist of the numbers 0-9 and the letters A-F
A 64-bit WEP key requires 10 Hexadecimal digits.
A 128-bit WEP key requires 26 Hexadecimal digits.
WEP Key to Use: Use the pull-down menu to select the WEP key. All
devices on the network must use the same key to communicate with one
another. Please be careful when entering WEP values, any input error
will result in a communication failure.
Deny Unencrypted Data: By default, this item is not selected. For
additional security when WEP is enabled, select Deny Unencrypted Data.
Data received without a WEP key is rejected when Deny Unencrypted Data
is selected.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Web Configuration
Shared Key Authentication: By default, this is not selected. If you
would like to include a WEP check before allowing connection on the
network, select this item. If it remains unselected, only the SSID will be
checked before authorizing connection.
Click Apply to update the settings. Click Cancel to discard any changes
you have made. Changes will only take effect after you restart the DWL-810.
To restart, click on Admin in the system tool bar. Click Reboot in the Admin
window.
IP Address
Click on IP
Address in the
menu. The
default settings
are displayed.
To change the
settings, input
information into
the following
fields:
Fig. 5.5
Static: Select
Static (recommended) to assign the IP Address, the Subnet Mask and the
Gateway Address of the DWL-810.
DHCP: Select DHCP if a DHCP-capable router on the network will assign
an IP Address to the DWL-810. (This is not recommended because a
DHCP-assigned IP Address will change frequently, making the
DWL-810 impossible to configure.)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Web Configuration
Static IP Address
When assigning IP Addresses to the computers on the network, please
remember that the IP Address for each computer must be in the same IP
Address range as all the computers in the network, and the subnet mask
must be exactly the same for all the computers in the network.
For example: If the first computer is assigned an IP Address of 192.168.0.2 with
a Subnet Mask of 255.255.255.0, then the second computer can be assigned an
IP Address of 192.168.0.3 with a Subnet Mask of 255.255.255.0, etc.
IMPORTANT: If computers or other devices are assigned the same IP
Address, one or more of the devices may not be visible on the network.
Bridge Name: The default setting is to leave this field blank. You may enter
a name for the DWL-810. This is optional.
Allow Upgrade Uploads: When upgrading firmware, select this checkbox.
Deselect this checkbox during normal operation, when not upgrading
firmware.
After completing the configuration, click Save to save the changes.
Click Cancel to discard the changes.
Changes will take effect after restarting the DWL-810. To restart, click
Admin in the menu. Click Reboot to restart the DWL-810.
Stations
Fig. 5.6
Click on Stations in the menu. A Stations table will appear, as shown here,
providing information regarding the device connected to the DWL-810.
Bridge Table: the table displays the IP Address and the MAC Address of
the device that is wirelessly connected to the DWL-810.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Web Configuration
Admin
Fig. 5.7
Click on Admin in the menu. An Admin window will appear. Here you can
change the password, restart the DWL-810 or reset it to factory default.
Change Password: You can use a password to prevent tampering with the
configuration of the DWL-810. By default, no password is required.
However, if you choose to use a password, type in a password that is no
more than 15 letters in length. Re-enter the password in the next field, and
click Change Password for the change to take effect. (Please make a note
of your password; anyone who accesses the configuration menu will be
required to enter the password you have selected.)
Reboot Bridge: Click Reboot to restart the DWL-810. Saved settings will
be retained.
Reset to Factory Defaults: Click on Factory Reset to return all settings to
the Factory Default values. (Press and release the Reset button on the back
of the unit to return the DWL-810 to its factory default settings.)
Note: If you reset the DWL-810 to its factory default settings, you will need
to reconfigure the unit.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Web Configuration
Help
Fig. 5.8
Click on Help in the menu to see an explanation of the items in the
Configuration menu.
About
Fig. 5.9
Click on About in the menu to see the full name of the DWL-810.
6. Installation
After you have configured the DWL-810, or if you are using Ad-Hoc mode,
you are ready to connect it to a network device to achieve wireless
transmission.
1. Connect one end of a Straight-Through Ethernet Cat5 cable to the
Ethernet port on the network device, and connect the other end of the
cable to the Ethernet port on the DWL-810.
2. Turn on the power of the network device.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Turn on the power of the DWL-810 by connecting one end of the
power adapter (included with your purchase) into the power port on
the DWL-810, and connecting the other end into the AC power outlet
on your wall.
4. The DWL-810 will automatically detect the MAC address of the
network device to which it is connected, and begin wireless
transmission to other wireless-enabled devices.
7. Troubleshooting
This section provides solutions to situations that can occur during the
installation and operation of the DWL-810 Ethernet-to-Wireless Bridge.
Read the following descriptions if you are having problems.
1. The DWL-810 Ethernet-to-Wireless Bridge Power light is not on.
•
Check to see if the DWL-810 Ethernet-to-Wireless Bridge power
adapter is connected properly to a known good power outlet.
2. The DWL-810 Ethernet-to-Wireless Bridge Link light is not on.
•
Make sure that the Ethernet cable is connected properly and your
Ethernet adapter supports 10BaseT.
Advanced Setup (optional)
Internet browser and gain access to the web configuration of the
DWL-810. The advanced setup features can be used to change the
LAN and wireless settings for your DWL-810 Ethernet-to-Wireless
Bridge.
3. I cannot connect to another wireless client.
•
The DWL-810 Ethernet-to-Wireless Bridge has a default SSID of
default. Make sure that the SSID on the DWL-810 Ethernet-to-
Wireless Bridge is exactly the same as the SSID on the other
wireless client.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
•
The DWL-810 Ethernet-to-Wireless Bridge has a default channel
of 6. Make sure that the channel on the DWL-810 Ethernet-to-
Wireless Bridge is exactly the same as the channel on the other
wireless client.
4. I cannot connect to an access point or wireless router.
•
The DWL-810 Ethernet-to-Wireless Bridge has a default wireless
setting of Ad-hoc. If you are connecting to an access point or
wireless router you will need to change that setting to
Infrastructure. (See Web Configuration in this manual.)
8. Technical Specifications
Standards:
•
•
IEEE 802.11b
IEEE 802.3 Ethernet
Adapter Type:
•
IEEE 802.3 Ethernet to IEEE 802.11b Wireless
Supported Operating Systems:
•
•
•
•
Windows XP
Windows 2000
Windows ME
Windows 98
Data Security:
•
•
64-bit WEP (Wired Equivalent Privacy) Encryption
128-bit WEP (Wired Equivalent Privacy) Encryption
Data Rate: Mbps
•
•
•
•
11 : CCK
5.5 : CCK
2 : DQPSK
1 : DBSK
Range:
•
•
Indoors – 115 to 328 feet (35 to 100 meters) per cell
Outdoors – 328 feet to 984 feet (100 to 300 meters) per cell
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Architecture:
Supports Ad-Hoc Mode (Peer-to-Peer without Access Point) or
•
Infrastructure Mode (Communications to wired networks via Access
Points with Roaming)
Antenna:
•
Internal Diversity Patch
Frequency Range:
•
2.4 – 2.4835 GHz, Direct Sequence Spread Spectrum (DSSS)
Transport Protocols:
•
TCP/IP
Physical Dimensions:
• L = 3.5 inches (90 mm)
• W = 3.2 inches (81.5 mm)
• H = 1.6 inches (40 mm)
Temperature:
•
•
Operating Temperature: 14ºF to 131ºF (-10°C to 55°C)
Storage Temperature: -4ºF to 167ºF (-20°C to 75°C)
Humidity:
•
Maximum up to 95% Non-condensing
Emissions:
•
•
FCC
CE
TCP/IP Protocols:
DHCP
•
Key Management:
•
Automatic Dynamic Key Allocation (ADKA) through public key
Ports:
•
One (1) 10Mbps RJ-45
Diagnostic LED:
•
•
Power
Link/Activity
Power Specifications:
22
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Operating Voltage: +5V 2.5A
Operating Channels:
•
1-11 United States (FCC)
Safety:
•
UL
9. Contacting Technical Support
You can find the most recent software and user documentation on the D-Link
website.
D-Link provides free technical support for customers within the United States
for the duration of the warranty period on this product.
U.S. customers can contact D-Link technical support through our web site,
or by phone.
D-Link Technical Support over the Telephone:
(877) 453-5465
24 hours a day, seven days a week.
D-Link Technical Support over the Internet:
When contacting technical support, please provide the following information:
•
•
•
Serial number of the unit
Model number or product name
Software type and version number
23
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Warranty and Registration
D-Link Systems, Inc. (“D-Link”) provides this 1-Year warranty for its product only to the person or entity
who originally purchased the product from:
•
•
D-Link or its authorized reseller or distributor.
Products purchased and delivered with the fifty United States, the District of Columbia, US
Possessions or Protectorates, US Military Installations, addresses with an APO or FPO.
1-Year Limited Hardware Warranty: D-Link warrants that the hardware portion of the D-Link products
described below (“Hardware”) will be free from material defects in workmanship and materials from the
date of original retail purchase of the Hardware, for the period set forth below applicable to the product
type (“Warranty Period”).
1-Year Limited Warranty for the Product(s) is defined as follows
•
•
Hardware (excluding power supplies and fans)
Spare parts and spare kits Ninety (90) days.
D-Link’s sole obligation shall be to repair or replace the defective Hardware at no charge to the original
owner. Such repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The
replacement Hardware need not be new or of an identical make, model or part; D-Link may in its
discretion replace the defective Hardware (or any part thereof) with any reconditioned product that D-Link
reasonably determines is substantially equivalent (or superior) in all material respects to the defective
Hardware. The Warranty Period shall extend for an additional ninety (90) days after any repaired or
replaced Hardware is delivered. If a material defect is incapable of correction, or if D-Link determines in
its sole discretion that it is not practical to repair or replace the defective Hardware, the price paid by the
original purchaser for the defective Hardware will be refunded by D-Link upon return to D-Link of the
defective Hardware. All Hardware (or part thereof) that is replaced by D-Link, or for which the purchase
price is refunded, shall become the property of D-Link upon replacement or refund.
Limited Software Warranty: D-Link warrants that the software portion of the product (“Software”) will
substantially conform to D-Link’s then current functional specifications for the Software, as set forth in the
applicable documentation, from the date of original delivery of the Software for a period of ninety (90)
days (“Warranty Period”), if the Software is properly installed on approved hardware and operated as
contemplated in its documentation. D-Link further warrants that, during the Warranty Period, the magnetic
media on which D-Link delivers the Software will be free of physical defects. D-Link’s sole obligation shall
be to replace the non-conforming Software (or defective media) with software that substantially conforms
to D-Link’s functional specifications for the Software. Except as otherwise agreed by D-Link in writing, the
replacement Software is provided only to the original licensee, and is subject to the terms and conditions
of the license granted by D-Link for the Software. The Warranty Period shall extend for an additional
ninety (90) days after any replacement Software is delivered. If a material non-conformance is incapable
of correction, or if D-Link determines in its sole discretion that it is not practical to replace the non-
conforming Software, the price paid by the original licensee for the non-conforming Software will be
refunded by D-Link; provided that the non-conforming Software (and all copies thereof) is first returned to
D-Link. The license granted respecting any Software for which a refund is given automatically terminates.
What You Must Do For Warranty Service:
Registration is conducted via a link on our Web Site (http://www.dlink.com/). Each product purchased
must be individually registered for warranty service within ninety (90) days after it is purchased and/or
licensed.
FAILURE TO PROPERLY TO REGISTER MAY AFFECT THE WARRANTY FOR THIS PRODUCT.
Submitting A Claim. Any claim under this limited warranty must be submitted in writing before the end of
the Warranty Period to an Authorized D-Link Service Office.
•
The customer must submit as part of the claim a written description of the Hardware defect or
Software nonconformance in sufficient detail to allow D-Link to confirm the same.
•
The original product owner must obtain a Return Material Authorization (RMA) number from the
Authorized D-Link Service Office and, if requested, provide written proof of purchase of the product
(such as a copy of the dated purchase invoice for the product) before the warranty service is provided.
•
•
After an RMA number is issued, the defective product must be packaged securely in the
original or other suitable shipping package to ensure that it will not be damaged in transit, and the
RMA number must be prominently marked on the outside of the package.
The customer is responsible for all shipping charges to and from D-Link (No CODs allowed).
Products sent COD will become the property of D-Link Systems, Inc. Products should be fully insured
by the customer and shipped to D-Link Systems Inc., 53 Discovery Drive, Irvine CA 92618.
D-Link may reject or return any product that is not packaged and shipped in strict compliance with the
foregoing requirements, or for which an RMA number is not visible from the outside of the package. The
24
Download from Www.Somanuals.com. All Manuals Search And Download.
product owner agrees to pay D-Link’s reasonable handling and return shipping charges for any product
that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by
D-Link not to be defective or non-conforming.
What Is Not Covered:
This limited warranty provided by D-Link does not cover: Products that have been subjected to abuse,
accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of reasonable
care, repair or service in any way that is not contemplated in the documentation for the product, or if the
model or serial number has been altered, tampered with, defaced or removed; Initial installation,
installation and removal of the product for repair, and shipping costs; Operational adjustments covered in
the operating manual for the product, and normal maintenance; Damage that occurs in shipment, due to
act of God, failures due to power surge, and cosmetic damage; and Any hardware, software, firmware or
other products or services provided by anyone other than D-Link.
Disclaimer of Other Warranties: EXCEPT FOR THE 1-YEAR LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS
PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF ANY KIND INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE
DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE
LIMITED TO NINETY (90) DAYS. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE
ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE
PRODUCT.
Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT,
NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT,
INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
(INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR
MALFUNCTION, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT
RETURNED TO D-LINK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY
SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR,
REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT.
GOVERNING LAW: This 1-Year Warranty shall be governed by the laws of the state of California. Some
states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how
long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This limited
warranty provides specific legal rights and the product owner may also have other rights which vary from
state to state.
Trademarks
Copyright® 2002 D-Link Corporation. Contents subject to change without prior notice. D-Link is a
registered trademark of D-Link Corporation/D-Link Systems, Inc. All other trademarks belong to their
respective proprietors.
Copyright Statement
No part of this publication may be reproduced in any form or by any means or used to make any
derivative such as translation, transformation, or adaptation without permission from D-Link
Corporation/D-Link Systems Inc., as stipulated by the United States Copyright Act of 1976.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio interference, in which
case the user may be required to take adequate measures.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communication. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum of 20 cm (about 8 inches) between the
radiator and your body.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
|