CY62256
256K (32K x 8) Static RAM
Features
Functional Description[1]
• High speed: 55 ns and 70 ns
The CY62256 is a high-performance CMOS static RAM
organized as 32K words by 8 bits. Easy memory expansion is
provided by an active LOW chip enable (CE) and active LOW
output enable (OE) and three-state drivers. This device has an
automatic power-down feature, reducing the power
consumption by 99.9% when deselected.
• Voltage range: 4.5V–5.5V operation
• Low active power (70 ns, LL version)
— 275 mW (max.)
• Low standby power (70 ns, LL version)
— 28 µW (max.)
An active LOW write enable signal (WE) controls the
writing/reading operation of the memory. When CE and WE
inputs are both LOW, data on the eight data input/output pins
• Easy memory expansion with CE and OE features
• TTL-compatible inputs and outputs
• Automatic power-down when deselected
• CMOS for optimum speed/power
(I/O through I/O ) is written into the memory location
0
7
addressed by the address present on the address pins (A
0
through A ). Reading the device is accomplished by selecting
14
the device and enabling the outputs, CE and OE active LOW,
while WE remains inactive or HIGH. Under these conditions,
the contents of the location addressed by the information on
address pins are present on the eight data input/output pins.
• Package available in a standard 450-mil-wide (300-mil
body width) 28-lead narrow SOIC, 28-lead TSOP-1,
28-lead reverse TSOP-1, and 600-mil 28-lead PDIP
packages
The input/output pins remain in a high-impedance state unless
the chip is selected, outputs are enabled, and write enable
(WE) is HIGH.
Logic Block Diagram
I/O
0
1
2
INPUTBUFFER
I/O
I/O
I/O
I/O
I/O
I/O
A
10
A
9
A
8
A
7
A
3
4
5
6
A
512 x 512
ARRAY
5
A
4
3
A
A
2
CE
WE
6
7
POWER
DOWN
COLUMN
DECODER
I/O
OE
Note:
1. For best practice recommendations, please refer to the Cypress application note “System Design Guidelines” on http://www.cypress.com.
Cypress Semiconductor Corporation
•
3901 North First Street
•
San Jose
•
CA 95134
•
408-943-2600
Document #: 38-05248 Rev. *B
Revised August 27, 2002
Download from Www.Somanuals.com. All Manuals Search And Download.
CY62256
Electrical Characteristics Over the Operating Range (continued)
CY62256−55
CY62256−70
[3]
[3]
Parameter
Description
Automatic CE
Power-down Current—
Test Conditions
Max. V , CE > V − 0.3V
Min. Typ.
Max. Min. Typ.
Max. Unit
I
1
5
50
5
1
2
5
50
5
mA
µA
µA
µA
SB2
CC
CC
V
> V − 0.3V, or V
<
IN
CC
IN
L
2
CMOS Inputs
0.3V, f = 0
LL
LL
0.1
0.1
0.1
0.1
Indust’l Temp Range
10
10
Capacitance[4]
Parameter
Description
Test Conditions
Max.
Unit
pF
C
C
Input Capacitance
Output Capacitance
T = 25°C, f = 1 MHz,
6
8
IN
A
V
= 5.0V
CC
pF
OUT
AC Test Loads and Waveforms
R1 1800 Ω
R1 1800Ω
5V
5V
OUTPUT
ALL INPUT PULSES
90%
OUTPUT
3.0V
GND
90%
10%
10%
R2
990Ω
R2
990Ω
100 pF
5 pF
< 5 ns
< 5 ns
INCLUDING
JIG AND
SCOPE
INCLUDING
JIG AND
SCOPE
(a)
(b)
Equivalent to:
THÉVENIN EQUIVALENT
639Ω
OUTPUT
1.77V
Data Retention Characteristics
[5]
[3]
Parameter
Description
for Data Retention
CC
Conditions
Min.
Typ.
Max.
Unit
V
V
V
2.0
DR
I
Data Retention Current
L
V
= 3.0V, CE > V − 0.3V,
> V − 0.3V, or V < 0.3V
CC IN
2
50
5
µA
µA
µA
ns
CCDR
CC
CC
V
IN
LL
0.1
0.1
LL Ind’l
10
[4]
t
t
Chip Deselect to Data Retention Time
Operation Recovery Time
0
CDR
[4]
t
ns
R
RC
Data Retention Waveform
DATA RETENTION MODE
> 2V
3.0V
3.0V
V
V
CC
DR
t
t
R
CDR
CE
Notes:
4. Tested initially and after any design or process changes that may affect these parameters.
5. No input may exceed VCC + 0.5V.
Document #: 38-05248 Rev. *B
Page 3 of 11
Download from Www.Somanuals.com. All Manuals Search And Download.
CY62256
[6]
Switching Characteristics Over the Operating Range
CY62256−55
CY62256−70
Parameter
Description
Min.
Max.
Min.
70
5
Max.
Unit
Read Cycle
t
t
t
t
t
t
t
t
t
t
t
Read Cycle Time
55
5
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
RC
Address to Data Valid
55
70
AA
Data Hold from Address Change
CE LOW to Data Valid
OHA
ACE
DOE
LZOE
HZOE
LZCE
HZCE
PU
55
25
70
35
OE LOW to Data Valid
[7]
OE LOW to Low-Z
5
5
0
5
5
0
[7, 8]
OE HIGH to High-Z
20
20
55
25
25
70
[7]
CE LOW to Low-Z
[7, 8]
CE HIGH to High-Z
CE LOW to Power-up
CE HIGH to Power-down
PD
[9, 10]
Write Cycle
t
t
t
t
t
t
t
t
t
t
Write Cycle Time
55
45
45
0
70
60
60
0
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
WC
CE LOW to Write End
Address Set-up to Write End
Address Hold from Write End
Address Set-up to Write Start
WE Pulse Width
SCE
AW
HA
0
0
SA
40
25
0
50
30
0
PWE
SD
Data Set-up to Write End
Data Hold from Write End
HD
[7, 8]
WE LOW to High-Z
20
25
HZWE
LZWE
[7]
WE HIGH to Low-Z
5
5
Switching Waveforms
[11, 12]
Read Cycle No. 1
t
RC
ADDRESS
t
AA
t
OHA
DATA OUT
PREVIOUS DATA VALID
DATA VALID
Notes:
6. Test conditions assume signal transition time of 5 ns or less, timing reference levels of 1.5V, input pulse levels of 0 to 3.0V, and output loading of the specified
OL/IOH and 100-pF load capacitance.
I
7. At any given temperature and voltage condition, tHZCE is less than tLZCE, tHZOE is less than tLZOE, and tHZWE is less than tLZWE for any given device.
8. tHZOE, tHZCE, and tHZWE are specified with CL = 5 pF as in (b) of AC Test Loads. Transition is measured ±500 mV from steady-state voltage.
9. The internal Write time of the memory is defined by the overlap of CELOW and WE LOW. Both signals must be LOW to initiate a Write and either signal can terminate
a Write by going HIGH. The data input set-up and hold timing should be referenced to the rising edge of the signal that terminates the Write.
10. The minimum Write cycle time for Write cycle #3 (WE controlled, OE LOW) is the sum of tHZWE and tSD
11. Device is continuously selected. OE, CE = VIL.
12. WE is HIGH for Read cycle.
Document #: 38-05248 Rev. *B
Page 4 of 11
Download from Www.Somanuals.com. All Manuals Search And Download.
CY62256
Switching Waveforms (continued)
[12, 13]
Read Cycle No. 2
t
RC
CE
t
ACE
OE
t
t
HZOE
t
DOE
HZCE
t
LZOE
HIGH
IMPEDANCE
HIGH IMPEDANCE
DATA OUT
DATA VALID
t
LZCE
t
PD
t
PU
V
ICC
ISB
CC
SUPPLY
CURRENT
50%
50%
[9, 14, 15]
Write Cycle No. 1 (WE Controlled)
t
WC
ADDRESS
CE
t
t
AW
HA
t
SA
t
PWE
WE
OE
t
SD
t
HD
DATA VALID
IN
DATA I/O
16
NOTE
t
HZOE
[9, 14, 15]
Write Cycle No. 2 (CE Controlled)
t
WC
ADDRESS
CE
t
SCE
t
SA
t
t
HA
AW
WE
t
t
HD
SD
DATA I/O
DATA VALID
IN
Notes:
13. Address valid prior to or coincident with CE transition LOW.
14. Data I/O is high impedance if OE = VIH
.
15. If CE goes HIGH simultaneously with WE HIGH, the output remains in a high-impedance state.
Document #: 38-05248 Rev. *B
Page 5 of 11
Download from Www.Somanuals.com. All Manuals Search And Download.
CY62256
Switching Waveforms (continued)
[10, 15]
Write Cycle No. 3 (WE Controlled, OE LOW)
t
WC
ADDRESS
CE
t
t
HA
AW
t
SA
WE
t
t
HD
SD
DATA I/O
DATA VALID
NOTE 16
IN
t
t
LZWE
HZWE
Note:
16. During this period, the I/Os are in output state and input signals should not be applied.
Document #: 38-05248 Rev. *B
Page 6 of 11
Download from Www.Somanuals.com. All Manuals Search And Download.
CY62256
Typical DC and AC Characteristics
CURRENT
STANDBY
vs. AMBIENT TEMPERATURE
NORMALIZED SUPPLY CURRENT
vs. AMBIENT TEMPERATURE
NORMALIZED SUPPLY CURRENT
vs. SUPPLY VOLTAGE
1.4
3.0
2.5
2.0
1.5
1.0
1.4
I
CC
1.2
1.0
0.8
0.6
1.2
1.0
0.8
0.6
I
CC
I
SB
V
IN
=5.0V
T =25°C
A
V
V
IN
=5.0V
=5.0V
0.5
0.4
CC
0.4
V
V
IN
=5.0V
=5.0V
CC
0.2
0.0
0.0
0.2
0.0
−55
I
SB
-0.5
−55
25
105
25
125
4.0
4.5
5.0
5.5
6.0
AMBIENT TEMPERATURE (°C)
AMBIENT TEMPERATURE (°C)
SUPPLY VOLTAGE (V)
NORMALIZED ACCESS TIME
vs. AMBIENT TEMPERATURE
OUTPUT SINK CURRENT
vs. OUTPUT VOLTAGE
NORMALIZED ACCESS TIME
vs. SUPPLY VOLTAGE
140
120
1.6
1.4
1.4
1.3
1.2
100
80
1.2
1.0
1.1
1.0
60
T =25°C
A
V
CC
=5.0V
T =25°C
A
V
CC
=5.0V
40
0.8
20
0
0.9
0.8
0.6
−55
0.0
1.0
2.0
3.0
4.0
25
125
4.0
4.5
5.0
5.5
6.0
AMBIENT TEMPERATURE (°C)
OUTPUT VOLTAGE (V)
SUPPLY VOLTAGE (V)
OUTPUT SOURCE CURRENT
vs. OUTPUT VOLTAGE
120
100
80
V
=5.0V
CC
60
T =25°C
A
40
20
0
0.0
1.0
2.0
3.0
4.0
OUTPUT VOLTAGE (V)
Document #: 38-05248 Rev. *B
Page 7 of 11
Download from Www.Somanuals.com. All Manuals Search And Download.
CY62256
Typical DC and AC Characteristics (continued)
TYPICAL POWER-ON CURRENT
vs. SUPPLY VOLTAGE
TYPICAL ACCESS TIME CHANGE
vs. OUTPUT LOADING
NORMALIZED I vs.CYCLETIME
CC
3.0
2.5
2.0
1.5
30.0
25.0
20.0
15.0
1.25
1.00
0.75
0.50
V
=5.0V
CC
T =25°C
A
V
IN
=0.5V
V
=4.5V
1.0
0.5
10.0
5.0
CC
T =25°C
A
0.0
0.0
0.0
1.0
2.0
3.0
4.0
5.0
0
200 400
600 800 1000
10
20
30
40
SUPPLY VOLTAGE (V)
CAPACITANCE (pF)
CYCLE FREQUENCY (MHz)
Truth Table
CE
H
L
WE
X
OE
X
Inputs/Outputs
High-Z
Mode
Power
Deselect/Power-down
Read
Standby (I
)
SB
H
L
Data Out
Data In
High-Z
Active (I
Active (I
Active (I
)
CC
L
L
X
Write
)
CC
L
H
H
Deselect, Output Disabled
)
CC
Ordering Information
Speed
Package
Name
Operating
Range
(ns)
Ordering Code
CY62256LL−55SNI
Package Type
55
SN28
Z28
28-lead (300-Mil Narrow Body) Narrow SOIC
28-lead Thin Small Outline Package
Industrial
CY62256LL−55ZI
CY62256−70SNC
CY62256L−70SNC
CY62256LL−70SNC
CY62256L–70SNI
CY62256LL−70SNI
CY62256LL−70ZC
CY62256LL−70ZI
CY62256−70PC
70
SN28
28-lead (300-Mil Narrow Body) Narrow SOIC
Commercial
Industrial
Z28
Z28
28-lead Thin Small Outline Package
28-lead (600-Mil) Molded DIP
Commercial
Industrial
P15
P15
P15
ZR28
Commercial
CY62256L−70PC
CY62256LL−70PC
CY62256LL−70ZRI
28-lead Reverse Thin Small Outline Package
Industrial
Document #: 38-05248 Rev. *B
Page 8 of 11
Download from Www.Somanuals.com. All Manuals Search And Download.
CY62256
Package Diagrams
28-lead (600-mil) Molded DIP P15
51-85017-A
28-lead (300-mil) SNC (Narrow Body) SN28
51-85092-*B
Document #: 38-05248 Rev. *B
Page 9 of 11
Download from Www.Somanuals.com. All Manuals Search And Download.
CY62256
Package Diagrams (continued)
28-lead Thin Small Outline Package Type 1 (8 x 13.4 mm) Z28
51-85071-*G
28-lead Reverse Type 1 Thin Small Outline Package (8 x 13.4 mm) ZR28
51-85074-*F
All product and company names mentioned in this document are the trademarks of their respective holders.
Document #: 38-05248 Rev. *B
Page 10 of 11
© Cypress Semiconductor Corporation, 2002. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use
of any circuitry other than circuitry embodied in a Cypress Semiconductor product. Nor does it convey or imply any license under patent or other rights. Cypress Semiconductor does not authorize
its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress
Semiconductor products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress Semiconductor against all charges.
Download from Www.Somanuals.com. All Manuals Search And Download.
CY62256
Document Title: CY62256 256K (32K x 8) Static RAM
Document Number: 38-05248
Issue
Date
Orig. of
Change
REV.
ECN NO.
Description of Change
**
113454
03/06/02
MGN
Change from Spec number: 38-00455 to 38-05248
Remove obsolete parts from ordering info, standardize format
*A
*B
115227
116506
05/23/02
09/04/02
GBI
GBI
Changed SN Package Diagram
Added footnote 1.
Corrected package description in Ordering Information table
Document #: 38-05248 Rev. *B
Page 11 of 11
Download from Www.Somanuals.com. All Manuals Search And Download.
|