CMMBX72 Operating Manual
This manual contains important information for the setup and
operation of your new Curtis Mathes Blu-ray Disc player. Keep
this manual handy during setup and troubleshooting to help you
connect your Blu-ray player to your TV and other AV equipment
and to help you answer any operating questions you may have.
Download from Www.Somanuals.com. All Manuals Search And Download.
Key features of your new
Blu-ray Disc Player
About the use of this user's manual
1) Be sure to be familiar with safety instructions before using this product.
2) If a problem occurs, check the Troubleshooting.
Blu-ray Disc Features
Blu-ray Discs can store 25GB (single layer) or 50 GB (dual layer) on a single side disc - about 5 to 10 times the
capacity of a DVD. Blu-ray Discs also support the highest quality HD video available in the industry (up to 1920 x
1080 at 40 Mbit / sec) - Large capacity means no compromise on video quality. Furthermore, a Blu-ray Disc has
the same familiar size and look as DVD.
* The following Blu-ray Disc features are disc dependant and will vary.
Appearance and navigation of features will also vary from disc to disc.
Not all discs will have the features described below.
Video highlights
The BD-ROM format for movie distribution support three highly advanced video codecs, including AVC, VC-1,
and MPEG-2.
HD video resolutions are also available:
・ 1920 x1080 HD
・ 1280 x 720 HD
For High-Definition Playback
To view high-definition contents in BD discs, an HDTV (High Definition Television) is required. Some discs may
require using the player's HDMI OUT to view high-definition content. The ability to view high-definition content
on BD discs may be limited depending on the resolution of your TV.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
Please read the manual carefully before using this DVD player, and keep it safe for future reference.
WARNING
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER - SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightening fl ash and
Arrowhead within triangle is
a warning sign alerting you of
dangerous voltage inside the
product.
The exclamation point within
the triangle is a warning sign
alerting you of important
To reduce the risk of electric shock, do
not remove the cover (or back) no
user - serviceable parts are inside. refer
servicing to qualified service
instructions accompanying the
personnel.
product.
Warning
In order to prevent the risk of fire or electric shock, do not expose the machine to rain or any moisture. Do not
open the case of the unit because of the risk of electric shock. Repair work must be undertaken by qualified
personnel.
Caution
If the unit is moved from a cold to warm environment condensation may develop on the lens of the laser. To
ensure correct operation switch the unit off and leave it for one hour before using.
Caution
This DVD player has a laser system.
Please note that hazardous radiation leakage may be caused if the player is misused in anyway. Do not defeat
the safety interlocks.
Do not open the case of the player. The laser light will become visible when the case is opened.
Warning
・ This machine may malfunction if it is modified or repaired by unauthorized persons.
・ The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
shall be placed on the product.
・ Must be shown how can operate the product via the MODE and Vol+ and Vol- button for the unit complete the
function.
CLASS 1
CLASS 1 LASER PRODUCT
LASER PRODUCT
Use of controls, adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
Caution
Laser radiation when open. Do not stare into beam.
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
PRECAUTIONS
Important Safety Instructions
Read these operating instructions carefully before using the unit. Following all the safety instructions listed
below. Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators. heat registers. Stoves. or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10) Protect t he Dower cord from being walked on or pinched particularly at plugs. Convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart. stand. tripod. bracket. or table specified by the manufacturer. or sold with the
apparatus. When a cart is used. use caution when moving the cart / apparatus combination to avoid injury
from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any wav. such as power-supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases,
shall be placed on the apparatus. Maintain well-ventilated conditions around the product. Do not place on
bed, sofa, or anything that blocks ventilation.
Handling Cautions
・ Before connecting other components to this Blu-ray Disc Player, be sure to turn them all off.
・ Do not move the Blu-ray Disc Player while a disc is being played, or the disc may be scratched or broken, the
Blu-ray Disc Player internal parts may be damaged.
・ Do not put a flower vase filled with water or any small metal objects on the Blu-ray Disc Player.
・ Be careful not to put your hand into the disc tray.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
・ Do not place anything other than the disc in the disc tray.
・ Exterior interference such as lightning and static electricity can affect normal operation of this Blu-ray Disc
Player. If this occurs , turn the Blu-ray Disc Player off and on again with the POWER button, or disconnect and
then reconnect the AC power cord to the AC power outlet. The Blu-ray Disc Player will operate normally.
・ Be sure to remove the disc and turn off the Blu-ray Disc Player after use.
・ Disconnect the AC power cord from the AC outlet when you don't intend to use the Blu-ray Disc Player for long
periods of time.
・ Clean the disc by wiping in a straight line from the inside to outside of the disc.
・ Do not to expose the player to dripping or splashing liquids.
・ When the AC plug is connected to a wall outlet, the player will still draw power (standby mode) when it is turn
off.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
・ Do not use benzene, thinner, or other solvents for cleaning.
・ Wipe the cabinet with a soft cloth.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Playing a Disc....................................................28
Skipping Tracks................................................29
Slow Motion Play/Step Motion Play.............29
System setup....................................................30
Reset Settings..................................................30
Firmware Upgrade..........................................31-32
System Information........................................33
Setting Up the Video Display.........................34
Picture Aspect..................................................34
Resolution.........................................................35
Resolution According to the Output Mode.........35-36
Setting Up the Audio Options.......................37-38
Setting Up the Language Options................39
Setting Up the Parental Lock.........................40-41
A
Message from Curtis Mathes.........................i
Key features of your new Blu-ray.....................1
Disc Player...........................................................1
About the use of this user's manual................1
Blu-ray Disc Features.........................................1
Video highlights.................................................1
For High-Definition Playback...........................1
Safety Information.............................................2
Precautions......................................................3-4
Getting Started...................................................6
Disc Type and Characteristics.......................6-7
Disc Types............................................................8
Disc Format.....................................................8-9
Disc Storage&Management.......................9-10
Description........................................................11
Front Panel........................................................11
Front Panel Display..........................................11
Rear Panel.........................................................12
Accessories.......................................................12
Remote Control.........................................13-14
Buttons and Functions.............................15-17
Connections.....................................................18
Watching
Using the Display Function............................42
Using the Top Menu Pop Menu..................43
a
Movie............................................42
&
Repeat Play........................................................44
Selecting the Audio Language......................44
Selecting the Subtitle Language..................44
Changing the Camera Angle..........................45
Listening to Music............................................46
Playing an Audio CD (CD-DA).........................46
Playing an MP3.................................................46
Audio CD (CD-DA)/MP3 Screen Elements...........46
Buttons on the Remote Control
Connecting to
Connecting to
Connecting to
Connecting to
Connecting to
a
TV with an HDMI Cable......18
TV with DVI Cable......20
TV (Component).................21
TV S-Video)........................22
TV (Video)............................23
a
a
a
a
(
(Used For Audio)..............................................47
a
Repeat Audio CD (CD-DA)
&
MP3..................47
Connecting to an Audio System
Viewing Pictures................................................48
About the Play List..............................................48
How to Create a Play List...................................48
About the Title List...........................................49
Listening to Music............................................49
Watching Video (from video disk or USB)..............50
Troubleshooting.........................................51-52
Specifications....................................................53
(2 ChannelAmplifier)......................................24
Connecting to an Audio System
(5.1 ChannelAmplifier)...................................25
Connecting to an Audio System
(
DOLBY Digital, DTS Amplifier).....................26
Basic Functions of Your Blu-ray
Disc Player.........................................................27
Before Playing..................................................27
On-Screen Menu Navigation.........................28
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
DISC TYPE AND CHARACTERISTICS
Disc types that can be played
Disc Types
BD-ROM
Disc Logo
Disc Shape
Max. Playing minute
Recorded content
AUDIO+VIDEO
Playing time depends
on the Title
Single sided (25GB/50GB)
Single sided (5 inches)
Double sided (5 inches)
Single sided (3 1/2 inches)
Double sided (3 1/2 inches)
Single sided (5 inches)
Single sided (3 1/2 inches)
240
480
80
DVD-VIDEO
AUDIO+VIDEO
160
74
AUDIO-CD
AUDIO
20
DVD-RW
480
5 inches (4.7GB)
5 inches (4.7GB)
AUDIO+VIDEO
AUDIO+VIDEO
(V mode and
(EX: Extended Play)
finalized only)
DVD-R
480
(V mode and
(EX: Extended Play)
finalized only)
CD-R/-RW
JPEG
MP3
DVD-RW/-R
・ This player is compatible with the NTSC color system only.
・ PAL discs will not play.
Disc types that can be played
Blu-ray Disc
Dolby Digital Plus
Dolby TrueHD
DTS-HD High Resolution Audio
DTS-HD Advanced Digital Out
NTSC broadcast system in U.S.A,
Canada, Korea, Japan
Digital Audio
MP3
Stereo
Java
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Discs that cannot be played
・ Blu-ray Discs with a region code other than "Region A".
・ BD-R, BD-RE
・ HD DVD Disc
・ DVD-Video with a region number other than "1" or "ALL".
・ DVD-RAM
・ 3.9GB DVD-R Disc for Authoring.
・ DVD-RW (VR mode)
・ DVD-ROM / PD / MV-Disc, etc
・ CVD / CD-ROM / CDV / CD-G / CD-I / LD
[NOTE]:
・ Some commercial discs and DVD discs purchased outside your region may not be playable with this product.
When these discs are played, either "No disc." or "Please check the regional code of the disc." will be displayed.
・ If a DVD-R / -RW disc has not been recorded properly in DVD video format, it will not be playable.
・ The unit cannot play CD-R / -RW and DVD-RW / -R recorded content such as divx, avi, mpg, mov, wma.
Region Code
Both the Blu-ray Disc Player and the discs are coded by region. These regional codes must match in order to play
the disc. If the codes do not match, the disc will not play.
The Region Number for this Blu-ray Disc Player is described on the rear panel of the Blu-ray Disc Player.
Disc Type
Blu-ray
DVD-Video
Region code
A
BD Region code
A
Area
North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and
South East Asia.
Europe, Greenland, French territories, Middle East, Africa, Australia and New Zealand.
B
C
India, China, Russia, Central and South Asia.
[NOTE]:
・ Playback may not work for some types of discs, or when specific operations, such as angle change and
aspect ratio adjustment, are being performed. Information about the disc is written in detail on the box. Please
refer to this necessary.
・ Do not allow the disc to become dirty or scratched. Finger prints, dirt, dust, scratches or deposits of cigarette
smoke on the recording surface may make it impossible to use the disc for playback.
・ Discs with PAL programs recorded on them cannot be played using this product.
・ When a BD-Java title is played, loading may take longer than a normal title, or some functions may perform
slowly.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Disc Types
BD-ROM
Blu-ray Disc Read Only Memory. A BD-ROM disc contains pre-recorded data. Although a BD-ROM may contain
any form of data, most BD-ROM discs will contain movies in High Definition format, for playback on Blu-ray Disc
Players. This can play back pre-recorded BD-ROM discs.
DVD-Video
・ A digital versatile disc (DVD)can contain up to 135-minutes,8 audio languages and 32 subtitle languages. It is
equipped with MPEG-2 picture compression and Dolby Digital surround, allowing you to enjoy vivid and clear
theatre quality images.
・ When switching from the first layer to the second layer of a dual-layered DVD Video disc, there may be
momentary distortion in the image and sound. This is not a malfunction of the unit.
・ Once a DVD-RW/-R recorded in Video Mode is finalized, it becomes DVD-Video.Pre- recorded (pre-stamped)
commercial DVDs with movies are also referred to as DVD-Videos. This unit can play back pre-recorded
commercial DVD discs (DVD Video discs) with movies.
Audio CD
・ An audio disc on which 44.1kHz PCM Audio is recorded.
・ This unit can play back CD-DA format audio CD-R and CD-RW discs.
・ This unit may not be able to play some CD-R or CD-RW discs due to the condition of the recording.
CD-R/-RW
・ Use a 700MB (80 minutes) CD-R/-RW disc. If possible, do not use a 800MB (90 minutes) or above disc, as the
disc may not play back.
・ If the CD-R/-RW disc was not recorded as a closed as a closed session, you may experience delays when playing
back the beginning of the disc or all recorded files may not play.
・ Some CD-R/-RW discs may not be playable with this unit, depending on the device which was used to burn
them. For contents recorded on CD-R/-RW media from CDs for your personal use, playability may vary
depending on contents and discs.
DVD-R Disc Playback
・ Once a DVD-R recorded in Video Mode is finalized, it becomes DVD-Video.
・ This unit can play back DVD-R discs recorded . It may not be able to play some DVD-R discs depending on the
disc and the condition of the recording.
DVD-RW Disc Playback
・ Playback can be performed with DVD-RW discs in the Video Mode and finalized only.
・ Once a DVD-RW recorded in Video Mode is finalized, it becomes DVD-Video. Ability ro play back may depend
on recording conditions.
Disc Format
Using MP3 disc
・ CD-R/-RW,DVD-RW/-R recorded with UDF,ISO9660 or JOLIET format can be played back.
・ Only MP3 files with the ".mp3" or ".MP3" extension can be played.
・ Playable bit-rate range is from 56Kbps to 320 Kbps.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
・ Playable sample-rate is 16KHz to 48KHz.
・ The unit can handle a maximum of 1500 files and folders under a parent folder. For MP3 files recorded with a
VBR (Variable Bit Rates), the sound may cut in and out.
Using JPEG disc
・ CD-R/-RW,DVD-RW/-R recorded with UDF,ISO9660 or JOLIET format can be played back.
・ Only JPEG files with the ".jpg", ".JPG", ".jpeg" or "JPEG" extension can be displayed.
・ Progressive JPEG is supportde.
DVD-RW/-R(V)
・ This is a format that used of recording data on a DVD-RW or DVD-R disc. The disc can be played by this Blu-ray
disc player once it has been finalized.
・ If a disc that has been recorded in video Mode by a different maker's recorder but has not been finalized, it
cannot be played by this Blu-ray disc player.
Disc Storage&Management
Disc Handing
・ Use discs with regular shapes. If an irregular disc(a disc a special shape)is used, this Blu-ray disc player may be
damaged.
Holding discs
・ Avoid touching the surface of a disc where recording is performed.
Blu-ray Discs
・ If the player is not used for a long period of time, remove the Blu-ray
Disc from the player and store it in its case.
Be careful not to leave fingerprints or scratches on the surface of the
Blu-ray Disc.
DVD-RM and DVD-R
・ Clean with an optional PD disc cleaner (LF-K200DCA1 where available).
Do not use cleaners or cloths for CDs to clean DVD-RW/-R discs.
DVD-Videao,Audio-CD
・ Wipe off dirt or contamination on the disc with a soft cloth.
Cautions on handing discs
・ Do not write on the printed side with a ball-point pen or pencil.
・ Do not use record cleaning sprays or antistatic. Also, do not use volatile chemicals, such as benzene or
thinner.
・ Do not apply labels or stickers to discs.(Do not use discs fixed with exposed tape adhesive or leftover peeled-
off stickers.)
・ Do not use scratch-proof protectors or covers.
・ Do not use discs printed with label printers available on the market.
・ Do not load warped or cracked discs.
Disc Storage
・ Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.
・ Do not keep under direct sunlight.
・ Keep in a cool ventilated area.
・ Store vertically.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
・ Keep in a clean protection jacket.
・ If you move your Blu-ray disc player suddenly from a cold place to a warm place, condensation may generate
on the operating parts and lens and cause abnormal disc playback. If this occurs, do not connect the plug to
the power outlet and wait for two hours. Then insert the disc and try to play back again.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
Front Panel
7
8
888:88:88
1
2
3
4
5
6
(
(
(
(
(
(
(
) Power Button
Turns the Blu-ray disc player on and off.
Open and closes the disc tray.
1
2
3
4
5
6
7
8
) Open / Close Button
) Play / Pause Button
) Previous Button
) Next Button
Press to play a disc or pause the playback.
Press to go to previous list / track / chapter.
Press to go to next list/track/chapter.
Stops disc playback.
/
) Stop Button
Opens to accept a disc.
) Remote Control Sensor
Disc Tray
Front Panel Display
1
2
4
7
888:88:88
9
3
5
6
8
DVD / CD / BD Indicator
PLAYBACK Indicator
PAUSE Indicator
Rotation
Disc type indicators.
Playback indicator.
Pause indicator.
1
2
3
4
5
6
7
8
9
Rotates when the disc is spinning.
Chapter Indicator
Operating
Playing time / clock / current status indicator.
Repetition Playback Indicator
DTS Indicator
DOLBY Digital Indicator
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
Rear Panel
10
1
2
3
4
5
6
7
8
9
HDMI OUT
Use the HDMI cable, connect this HDMI output terminal to
the HDMI input terminal on your TV for the best quality picture.
Connects to the input of external equipment using a video
cable.
1
2
VIDEO OUT
Connects to the input of external equipment using an
S- Video cable.
3
S-VIDEO OUT
Connects to equipment having component video input.
Connects to an amplifier having a digital coaxial audio input
jack.
4
5
COMPONENT VIDEO OUT
COAXIAL OUT
6
7
Connects to an amplifier having a digital optical audio input
jack.
OPTICAL OUT
AUDIO OUT
Connects to the audio input of external equipment using audio
cables.
Connects to a 5.1CH analog input on an A/V amplifier.
The fan always revolves when the power is on. Ensure a minimum of 4
inches of clear space on all sides of the fan when installing the product.
AC100~240V 50/60Hz
8
9
5.1 CH AUDIO OUT
FAN
10
AC INLET
Accessories
Remote Control............................1
Audio Cable.................................1
User's manual..............................1
Batteries............................1
HDMI Cable........................1
Warranty Card.....................1
Warranty card
Remote control
Batteries
Audio cable
HDMI Cable
User's manual
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Loading Batteries
1. Push downward and outward the 2. Insert two size AAA batteries
3. Close the cover.
leaf spring to remove the battery
compartment cover.
according to the "+" and "-"
markings.
[NOTE]:
A. Do NOT mix different types together, or old batteries with new batteries.
B. While the remote controller will not be used for an extended period of time, remove the batteries to prevent
possible corrosion.
C. To prevent corrosion resulting in damage, remove exhausted batteries immediately.
Where the remote exhausted batteries immediately. Where the remote controller doesn't appear to operate
normally, replace both of the batteries.
D. Typical life for the batteries provided with this product is about 6 months. The life expectance may vary
according to the use status.
Operating with the Controller
Point the remote controller toward the remote sensor on your DVD home theatre center. Upon receipt of the
signal from the remote controller, the equipment will operate accordingly. The description in this manual is
based on the buttons on the equipment. You may use the counterparts on the remote controller to do the same
888:88:88
300 300
About: 5m
[NOTE]:
A. Do not place this equipment in a place exposed to direct sunlight or strong light source like inverting
fluorescent light, or else it may interfere with correct operation of the remote controller.
B. When other similar remote controller is used in the same room, or when this product is used near other
equipment using infrared ray, interference with the operation of this remote controller may occur.
C. Do not place any object on the remote controller or else it may cause unintentional depression of the buttons
and waste the batteries unnecessarily.
D. The front of the chassis should not be glazed with color glass, or else ti may cause interference with normal
operation of the remote controller.
E. Any barrier between the remote controller and remote sensor will inactivate any operation of the remote
controller.
F. The operating range between the remote controller and the equipment shall be no more than 5 meters (16
feet). When the operating range becomes shorter, replace the batteries with new ones..
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
STANDBY Button
OPEN/CLOSE Button
INFO Button
RESOLUTION Button
ANGLE Button
SEARCH Button
PIP Button
REPEAT Button
SETUP Button
ZOOM Button
NUMBER Button
TOP MENU Button
TITLE Button
POP MENU Button
ENTER / DIRECTION Buttons
(
)
PLAY Button
RETURN Button
STOP Button
PAUSE/STEP Button
AUDIO Button
MUTE Button
FORWARD SKIP Button
REVERSE SKIP Button
SUBTITLE Button
SLOW Button
FORWARD SEARCH Button
REVERSE SEARCH Button
RED Button
BLUE Button
GREEN Button
YELLOW Button
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
BUTTON
INTRO
BUTTON
INTRO
Search a chapter or time to
start playing
STANDBY Button
Power On/Off
SEARCH Button
Change the resolution of
output
RESOLUTION Button
ANGLE Button
PIP Button
Allows you to repeat a
Multi-angle optional playing
REPEAT Button
SETUP Button
ZOOM Button
TITLE Button
POP MENU Button
RETURN Button
STOP Button
title, chapter, track or disc.
Digital button, for item
Enter setup menu
Zoom in or off
NUMBER Buttons
TOP MENU Button
selection & programming
Display the disc root menu
Return to the main menu
in playing mode
ENTER / DIRECTION
Buttons (
Confirm selection / For
directions selection
)
Play
Display the disc menu
PLAY Button
Pause /Step
PAUSE / STEP Button
AUDIO Button
Return selection
Stop
Stereo / Left audio output
/ Right audio output switch
Play next item or chapter in
playing mode
FORWARD SKIP
Button
MUTE Button
Mute on/off
Return to last item or
Select the subtitle language
Slow play
SUBTITLE Button
SLOW Button
REVERSE SKIP Button
chapter in playing mode
FORWARD SEARCH
Button
Fast forward play
Reverse play
REVERSE SEARCH
Button
Open/Close the disc tray
OPEN/CLOSE Button
INFO Button
Displays current setting or
disc status
Regarding The Battery
If the remote does not operate properly:
・ Check the polarity + - of the batteries (Dry-Cell).
・ Check if the batteries are drained.
・ Check if remote sensor is blocked by obstacles.
・ Check if there is any fluorescent lighting nearby.
Dispose of batteries according to local environmental regulations. Do not put them in the household trash.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
BUTTON
FOR DVD
FOR CDDA
FOR BD-R
FOR ISO
STANDBY Button
Power On/Off
Change the resolution of output
RESOLUTION Button
ANGLE Button
Change angle
Not supported
Digital button, for item selection & programming
Not supported
NUMBER Buttons
TOP MENU Button
ENTER / DIRECTION
Confirm selection / For directions selection
Buttons (
)
Playing the disc or resume playing if in paused mode
Step status if in paused mode / Paused if in playing mode
PLAY Button
PAUSE / STEP Button
AUDIO Button
Change audio stream
Not supported
MUTE Button
Mute on/off
Select the subtitle language
Not supported
SUBTITLE Button
SLOW Button
Slow play
Open/Close the disc tray
OPEN/CLOSE Button
Displays The status of player, Elapsed time
of disc playing, Current title /chapter,
Frequency or Bitrate
Displays Track
number, duration, file size, format,
elapsed time duration, elapsed time
Displays File name,
INFO Button
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
BUTTON
FOR DVD
FOR CDDA
FOR BD-R
FOR ISO
Search a chapter or time to start playing
SEARCH Button
PIP Button
Allows you to repeat off, title or chapter Allows you to repeat disc, track or random
REPEAT Button
SETUP Button
ZOOM Button
TITLE Button
Adjust basic functions such as brightness, contrast, hue, saturation... this takes effect
only when playing video
Zoom in or off
Display pop-up menu
during playback
Go to the root of
Title
POP MENU Button
RETURN Button
Return invalid
Stop playing disc
temporarily, press
Stop again to return
Stop playing the
current file and
Stop playing disc permanently to return to
STOP Button
to Main Menu, or hit Main Menu
Play to resume
return to file browser
playing disc
FORWARD SKIP
Button
Jump to next chapter or next track or next file in isodisc
REVERSE SKIP
Button
Jump to previous chapter or next track or previous file in iso disc
Forward at x8, x16, x32 or x48 speed.
FORWARD SEARCH
Button
REVERSE SEARCH
Button
Jump to next chapter or next track or next file in iso disc
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
This section involves various methods of connecting the Blu-ray disc player to other external components.
Connecting to a TV with an HDMI Cable
1. Using an HDMI-HDMI cable connect the HDMI OUT terminal on the rear of the Blu-ray disc player to the HDMI
IN terminal of your TV.
2. Press the input selector on your TV remote control until the HDMI signal from the Blu-ray appears on your TV
screen.
If you have set the remote control to properly operate with your TV , press the TV INPUT SEL.button on the
remote control and select HDMI as the external source of the TV.
HDMI
HDMI
HDMI Cable
HDMI
TV
HDMI
[NOTE]:
If the HDMI cable is connected or removed during playback of a CDDA, MP3 or JPEG file, the player will stop
playing.
HDMI auto detection function
The player's video output will automatically change to HDMI mode when connecting an HDMI cable while
power is on).
[NOTE]:
・ Depending on your TV, certain HDMI output resolutions may not work.
・ Please refer to the use's manual of your TV.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
・ If an HDMI-HDMI cable is connected, HDMI mode is automatically selected.
・ When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI output
resolution will be automatically set to the highest provided by the TV.
HDMI (High Definition Multimedia Interface)
HDMI is an interface that enables the digital transmission of video and audio data with just a single connector.
Using HDMI, the Blu-ray disc player transmits a digital video and audio signal and displays a vivid picture on a
TV having an HDMI input jack.
HDMI connection description
HDMI connector-Supports video and digital audio data (LPCM or Bitstream).
・ HDMI outputs only a pure digital signal to the TV.
・ If your TV does not support HDCP (High-bandwidth Digital Content Protection),random noise appears on the
screen.
What is the HDCP?
HDCP (High-bandwidth Digital Content Protection)is a system for protecting BD/DVD content outputted via
HDMI from being copied. It provides a secure digital link between a video source(PC,DVD.etc)and a display
device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being
made.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to a TV with DVI Cable
1. Using the HDMI-DIV cable (not included), connect the HDMI OUT terminal on the rear of the Blu-ray disc
player to the DVI IN terminal of your TV.
2. Using the audio cables (not included), connect the AUDIO (red and white) OUT terminals on the rear of the
Blu-ray disc Turn on the Blu-ray disc player and TV.
3. Press the input selector on your TV remote control until the DVI signal from the Blu-ray disc player appears on
your TV screen.
If you have set the remote control to properly operate with your TV, press the TV INPUT SEL. button on the
remote control and select HDMI as the external source of the TV.
Connecting the HDMI cable while the Blu-ray player's power is on, the player's video output will automatically
change to HDMI mode.
[NOTE]:
・ Depending on your TV, certain HDMI output resolutions may not work.
・ Please refer to the use's manual of your TV.
・ If an HDMI or HDMI-DVI cable is plugged into TV, the Blu-ray disc player's output is set to HDM I / DVI
automatically within 10 seconds.
・ If Component and HDMI are both connected, HDMI mode is automatically selected.
・ When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI output
resolution will be automatically set to the highest provided by the TV.
・ If the HDMI cable is connected or removed during playback of a CDDA, MP3 or JPEG file, the player will stop
playing.
W
R
Audio Cable
(not included)
HDMI-DVI Cable
(not included)
TV
W
L
R
R
DVI IN
W
R
AUDIO IN
white
red
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to a TV (component)
Connecting to your TV using Component video cables.
You will enjoy high quality and accurate color reproduction images. Component video separates the picture
element into back and white (Y), blue (PB) signals to present clear and clean images (Audio signals are delivered
through the audio output).
1. Using component video cables (not included), connect the component video out terminals on the rear of the
Blu-ray disc player to the component in terminals of your TV.
2. Using the audio cables (not included), connect the audio (red and white) in terminals of your TV. Turn on the
Blu-ray disc player and TV.
3. Press the input selector on your TV remote control until the component signal from the Blu-ray disc player
appears on the TV screen. If you have set the remote control to properly operate with your TV, press the TV
input sel. button on the remote control and select component as the external source of the TV.
G
B
R
W
R
Audio Cable
(not included)
Component Cable
(not included)
TV
Pr
Pb
Y
R
B
G
Y
W
L
R
R
Pr
Pb
COMPONENT IN
R
B
G
W
AUDIO IN
green
blue
red white
[NOTE]:
・ Depending on the manufacturer, the component terminals on your TV may be marked"R-Y, B-Y, Y" or "Cr, Cb, Y"
instead of "Pr, Pb, Y". The number and position of terminals may vary depending on the TV set. Please refer to
the use's manual of your TV.
・ You can select from a variety of resolution settings such as 1080i,720p,480p and 480i, depending on the disc
type.
・ The actual resolution may differ from the setting in the SETUP menu if both Component and HDMI cables are
connected. The resolution may also be different depending on the disc.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to a TV ( S-Video)
Connecting to your TV using an S-Video cable.
You will enjoy high quality images. S-video separates the picture element into black and white (Y) and color (C)
signals to present clearer images than regular video input mode.
1. Using an S-video cable (not included),connect the S-VIDEO OUT terminal on the rear of the Blu-ray disc player
to the S-VIDEO IN terminals of your TV.
2. Using the audio cables (not included), connect the AUDIO(red and white)OUT terminals on the rear of the
Blu-ray disc player to the AUDIO (red and white) IN terminals of your TV. Turn on the Blu-ray disc player and TV.
3. Press the input selector on your TV remote control until the S-VIDEO signal from the Blu-ray disc player
appears on your TV screen.
If you have set the remote control to properly operate with your TV, press the TV INPUT SEL. button on the
remote control and select S-VIDEO as the external source of the TV.
W
R
Audio Cable
(not included)
S-Video Cable
(not included)
TV
W
L
R
R
W
R
white
red
S-VIDEO IN
AUDIO IN
[NOTE]:
・ The S-VIDEO source is always output in 480i resolution regardless of the set resolution in the SETUP menu.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to a TV (Video)
1. Using video / audio cables, connect the VIDEO (yellow) / AUDIO (red and white) OUT terminals on the rear of
the Blu-ray disc player to the VIDEO(yellow)/AUDIO(red and white)IN terminals of your TV.
2. Turn on the Blu-ray disc player and TV.
3. Press the input selector on your TV remote control until the Video signal from the Blu-ray disc player appears
on the TV screen.
If you have set the remote control to properly operate with your TV, press the TV INPUT SEL. button on the
remote control and select VIDEO as the external source of the TV.
W
Y
R
TV
Y
G
W
yellow red white
Y
W
L
R
R
VIDEO IN
AUDIO IN
[NOTE]:
・ Noise may be generated if the audio cable placed too close to the power cable.
・ If you want to connect to an Amplifier, please refer to the Amplifier connection Pages.
・ The number and position of terminals may vary depending on your TV set. Please refer to the use's manual of
your TV.
・ If there is one audio input terminal on the TV, connect it to the [AUDIO OUT] [left] (white) terminal of the
Blu-ray disc player.
・ The VIDEO source is always output in 480i resolution regardless of the set resolution in the SETUP menu.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to an audio system (2 channel amplifier)
1. Using the audio cables (not included), connect the AUDIO (red and white) OUT terminals on the rear of the
Blu-ray disc player to the AUDIO (red and white) IN terminals of your Amplifier.
2. Using the video signal cable (s),connect the HDMI, COMPONENT, S-VIDEO or VIDEO OUT terminals on the rear
of the Blu-ray disc player to HDMI, COMPONENT, S-VIDEO or VIDEO IN terminal of your TV .
3. Turn on the Blu-ray disc player, TV and Amplifier.
4. Press the input select button of the Amplifier to select the external input in order to hear sound from the
Blu-ray disc player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
W
R
Audio Cable
(not included)
W
L
R
R
W
R
white
red
AUDIO IN
2-Channel stereo amplifier
[NOTE]:
・ Manufactured under license from Dolby Laboratories. " Dolby" and the double-D symbol are trademarks of
Dolby Laboratories.
・ "DTS" and "DTS Digital Surround" are registered trademarks of DTS, Inc.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to an audio system (5.1 channel amplifier)
1. Using the audio cables, connect the 5.1 ANALOG AUDIO OUT (Front R, Back L, CENTER, SUBWOOFER, Surround L,
Surround R) terminals on the rear of the Blu-ray disc player to the 5.1 Channel ANALOG AUDIO IN (Front R, Front L,
CENTER, SUBWOOFER, Surround L, Surround R) terminal of your Amplifier.
2. Using the video signal cable (s), connect the HDMI, COMPONENT, S-VIDEO or VIDEO OUT terminals on the rear
of the Blu-ray disc player to HDMI, COMPONENT, S-VIDEO or VIDEO IN terminal of your TV as described.
3. Turn on the Blu-ray disc player, TV and Amplifier.
Press the input select button of the Amplifier to select the external input in order to hear sound from the
Blu-ray disc player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
5.1 Channel Amplifier
[NOTE]:
・ Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the
speakers and your ears.
・ Please set the audio in the menu screen according to the Amplifier.
・ The position of terminals may vary depending on the Amplifier. Please refer to the use's manual of your
Amplifier.
・ The front left and right outputs on your player and 5.1 channel amplifier must be connected to hear disc menu
audio from certain Blu-ray discs.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to an audio system ( DOLBY Digital, DTS amplifier)
1. If using an optical cable (not included), connect the DIGITAL AUDIO OUT (optical) terminal on the rear of the
Blu-ray disc player to the DIGITAL AUDIO IN (optical) terminal of your Amplifier.
2. If using a coaxial cable (not included),connect the HDMI, COMPONENT, S-VIDEO or VIDEO OUT terminals on
the rear of the Blu-ray disc player to HDMI, COMPONENT, S-VIDEO or VIDEO IN terminal of your TV.
3. Turn on the Blu-ray disc player, TV and Amplifier.
Press the input select button of the Amplifier to select the external input in order to hear sound from the
Blu-ray Disc player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
or
COAXIAL OPTICAL
2-Channel stereo amplifier
[NOTE]:
・ Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the
speakers and your ears.
・ Please set the audio in the menu screen according to the Amplifier.
・ The position of terminals may vary depending on the Amplifier. Please refer to the use's manual of your
Amplifier.
・ When using this connection, Blu-ray Discs with an LPCM audio soundtrack will only be heard over the front
two channels.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions of Your
Blu-ray Disc Player
This section introduces basic playback functions and playback by disc type.
BEFORE PLAYING
・ Turn on your TV and set it to the correct Video Input (the input the Blu-ray player is connected to).
・ If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
After plugging in the player, the first time you press the POWER button, this screen comes up:
Note:
・ Discs which cannot be played on this player.
BD-R
BD-RE
DVD-ROM
CVD
HD DVD
DVD-RAM
CD-I
DVD+RW
CDV
DVD+R
CD-ROM
Super Audio CD(except CD layer)
CDGs play audio only, not graphics.
・ Ability to play back may depend on recording conditions.
DVD-R CD-RW/R DVD-RW (V mode)
The unit may not play certain CD-R, CD-RW and DVD-R due to the disc type or recording conditions.
・ Blu-ray Disc is a new and evolving format. Accordingly, disc compatibility issues with new and existing format
discs are possible. Not all discs are compatible and not every disc will playback.
For additional information, refer to the Disc Type and Characteristics and Compliance and Compatibility Notice
sections of this Manual. If you encounter compatibility problems, please contact SAMSUNG customer care
center.
・ The unit cannot play CD-R/-RW and DVD-RW/-R recorded content such as divx, avi, mpg, mov, wma.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions of Your
Blu-ray Disc Player
ON-SCREEN MENU NAVIGATION
Reset Settings
General
Update Firmware
Software Version
TV Aspect
Resolution
Video
Audio
General
Video
Digital Output
Audio
PCM Down Sampling
Dynamic Compression
Language
Parental
OSD
Language
Audio
Subtitle
Disc Menu
Change Password
DVD Parental
BD Parental
Parental
PLAYING A DISC
1. Press the OPEN/CLOSE(
) button, and then the tray opens.
2. Place a disc gently into the tray with the disc's label facing up.
3. Press the PLAY/PAUSE( ) button or OPEN/CLOSE(
) button to close the disc tray
4. The player will playback the disc, when the unit detecting the disc is available.
Note:
・ When you stop disc play, the player remembers where you stopped, so when you press PLAY/PAUSE(
button again, it will pick up where you left off.
)
・ Press the STOP(
・ To pause the playback, press the PLAY/PAUSE(
To resume, press the PLAY/PAUSE( ) button once again.
) button twice during playback to disable the Resume function.
) button during playback.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions of Your
Blu-ray Disc Player
Skipping Tracks
During playback, press the
button.
When playing a BD/DVD, if you press the
button, it moves to the next chapter. If you press the
button,
it moves to the beginning of the chapter. One more press makes it move to the beginning of the previous
chapter.
SLOW MOTION PLAY/STEP MOTION PLAY
Slow Forward Play
In pause or step mode, press the SLOW button on the remote control for Slow Forward play.
・ To return to normal speed playback, press the PLAY button.
Note:
・ This (
) icon indicates an invalid button press.
・ No sound is heard during slow mode.
Step Forward Play
Press the STEP button on the remote control during play for Step Forward play.
・ Each time the button is pressed a new frame will appear.
・ When the STEP button is pressed, the next frame will be activated.
・ Press the PLAY/PAUSE (
) button to resume normal play.
Note:
・ No sound is heard during step mode.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
System setup
For your convenience, configure proper settings for the external device to connect
or any other environment before using the player.
Reset Setting
1. With the unit in No Disc mode, press the SETUP button.
General
2. Press the
ENTER or
buttons to select General, then press the
button.
buttons to select Reset Setting, then
button.
Video
Audio
3. Press the
Language
Parental
press the ENTER or
General
Video
Reset Settings
Update Firmware
Software Version
Audio
Language
Parental
Reset all settings
General
Video
Reset Settings
Are you sure?
Update Firmware
Software Version
Audio
Language
Parental
Press enter to access this feature
General
Video
Reset Settings
Are you sure?
Update Firmware
Software Version
Audio
Language
Parental
Yes
No
Press enter to access this feature
30
Download from Www.Somanuals.com. All Manuals Search And Download.
System setup
Firmware Upgrade
1. With the unit in No Disc mode, press the SETUP button.
2. Press the
ENTER or
buttons to select General, then press the
button.
General
Video
Audio
Language
Parental
3. Press the
buttons to select Upgrade Firmware ,
button.
then press the ENTER or
General
Video
Reset Settings
Update Firmware
Software Version
Audio
Language
Parental
Update Firmware
4. Press the
button to select CD ROM, then press the
ENTER button.
General
Video
Reset Settings
CD ROM
Update Firmware
Software Version
Audio
Language
Parental
Press enter to access this feature
5. You will see a window that ask whether you want to run
update firmware.
6. If "Yes", please insert firmware disc.
7. You can view available audio file on the disc, then press
"RETURN" button.
8. According to the message and reboot the unit.
If the upgrade is possible : You will see information on the
current and new versions of firmware in a message box.
9. If the upgrade is possible, the unit will upgrade the
firmware from CD ROM.
・ If the upgrade is not possible : You will see the following
description in the message box.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
System setup
・ If the cable is not connected :
"This system can not connect to internet for update. Please, check the network setup."
・ If the network connection has failed :
"This system can not connected to internet for update. Please, check the network setup"
・ If no later version is released (the latest version has been already installed) :
"The latest version of the firmware is already installed. There is no need to update."
・ If there is a disc in the player :
"Please maintain "No Disc" state for network update."
This indicates that you must remove all discs from the unit to perform the update.
10. According to the message on the screen to reboot the unit.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
System setup
SYSTEM INFORMATION
When the firmware upgrade is done, check the firmware
details by following the steps below.
Reset Settings
General
Video
Update Firmware
Software Version
1. With the unit in Stop mode, press the SETUP button.
Audio
2. Press the
press the ENTER or
3. Press the buttons to select System Information,
then press the ENTER or button.
buttons to select System Upgrade, then
Language
Parental
button.
Software Version
You can see detailed information about the current
firmware.
Input password
Reset Settings
General
Video
Update Firmware
Software Version
Audio
・ If DHCP is set to On, you can't select IP Address, Subnet
Mask or Gateway.
Language
Parental
・ If DNS is set to Automatic, you can't select Primary /
Secondary DNS.
Press Enter the to view software version
Input password
Reset Settings
General
Video
Update Firmware
Software Version
Input password
Audio
Language
Parental
Password
OK
Cancel
Press Enter the to view software version
Input password
Reset Settings
General
Software Version
Update Firmware
Video
Software Ver
SMP8634_2.0-RC1.2 blue_GCC4_mips
Audio
bdtoolkit_20080512
R2.0RC1.1-BD_282_18
Language
Parental
SMP8634_BD_282_18GCC4_dev.mips
Press Enter the to view software version
33
Download from Www.Somanuals.com. All Manuals Search And Download.
System setup
SETTING UP THE VIDEO DISPLAY / OUTPUT OPTIONS
This function allows you to setup the TV screen settings.
This function depends on the disc or TV type. It may not
work with some discs or TVs.
General
Video
1. With the unit in Stop mode, press the SETUP button.
2. Press the
press the ENTER or
Video setup menu will be displayed.
buttons to select VIDEO Setup, then
Audio
button.
Language
Parental
3. Press the
buttons to select the desired display
option from the options on the following pages.
TV Aspect
Resolution
General
Video
Audio
Language
Parental
Select the display configuration for 16:9picture on a 4:3 TV screen
4. Press the ENTER or
buttons to select the desired sub-
menu item from a video display option, then press the
ENTER button.
TV Aspect
Resolution
4 : 3 Letter Box
4 : 3 Pan-Scan
16 : 9 Wide
General
Video
Note:
Audio
Press the RETURN or
button to return to the previous
Language
Parental
menu. Press the MENU button to exit the menu.
Select the display configuration for 16:9picture on a 4:3 TV screen
Picture Aspect
Depending on the type of television you have, you may want to adjust the screen setting. (aspect ratio)
* 4:3 Pan-Scan :
Select this for conventional size TV when you want to see the central portion of the 16:9
screen. (Extreme left and right side of movie picture will be cut off.)
* 4:3 Letter Box :
Select when you want to see the total 16:9 ratio screen BD/DVD supplies, even though you
have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.
* 16:9 Wide :
You can view the full 16:9 picture on your wide screen TV.
Note:
・ Depending on the disc type, some aspect ratios may not be available.
・ Certain movies will be displayed in 4:3 Pillar box (black bars on sides of picture) even if 16:9
wide is selected.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
System setup
Resolution
Sets the output resolution of the Component and HDMI
video signal.
TV Aspect
Resolution
General
Video
・ The number in 480i, 480p, 720p, 1080p and 1080i indicates
the number of lines of video. The i and p indicate interlace
and progressive scan, respectively.
Audio
Language
Parental
・ 480/576i: Outputs 480 lines of interlaced video / Outputs
576 lines of interlaced video.
Just for HDMI, YUV, Video / S-video
・ 480/576p: Outputs 480 lines progressive video / Outputs
576 lines progressive video.
・ 720p: Outputs 720 lines of progressive video.
・ 1080i: Outputs 1080 lines of interlaced video.
・ 1080p24: Outputs 1080 lines of progressive video.
General
Video
TV Aspect
Resolution
480 / 576i
480 / 576p
720p
Audio
If the connected TV does not support the movie frame or
the selected resolution, you will see the following message:
If you select Yes and the resolution is not supported, the
TV's screen will be blank.
Language
Parental
1080i
1080p
1080p24
Just for HDMI, YUV, Video / S-video
Note:
If the screen is blank, press and hold the
button on the
front of the player for more than 5 seconds (no disc inserted). All settings are restored to the factory default.
Follow the steps on the previous page to access each mode and select the Display Setup that your TV will
support.
Resolution according to the output mode
・ BD playback
Output
Setup
VIDEO/S-Video
480i
HDMI
Component
1080i
1080p, Movie Frame(24Fs) off
1080P@60F
1080p/1080i, Movie Frame (24Fs) on
1080P@24F
1080i
1080i
1080i
720P
480P
480i
480i
480i
480i
480i
480i
1080i, Movie Frame (24Fs) off
720P
480P
480i
720P
480P
480P
・ DVD playback
Output
VIDEO/S-Video
HDMI
1080P@60F
1080i
Component
480P
Setup
1080p
1080i
720P
480P
480i
480i
480i
480i
480i
480i
480P
720P
480P
480P
480P
480P
480i
35
Download from Www.Somanuals.com. All Manuals Search And Download.
System setup
Note:
・ This player has the HDMI Auto Detect Feature. When the player is fi rst connected to a TV via HDMI, the player's
output will be set automatically to HDMI.
・ If the HDMI Auto Detection feature does not work, you can't select the 1080p resolution or Movie Frame (24Fs).
・ The BD disc must have the 24 frame feature in order to use the Movie Frame (24Fs) mode.
・ If you have both HDMI and Component cables connected to your TV, the Component resolution may differ
from the chart above.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
System setup
SETTING UP THE AUDIO OPTIONS
Allows you to set up the Audio device and sound status
depending on the audio system being used with the player.
General
Video
1. With the unit in Stop mode, press the MENU button.
Audio
2. Press the
buttons to select Setup, then press the
Language
Parental
ENTER button.
3. Press the
buttons to select Audio Setup, then press
button.
the ENTER or
4. Press the
buttons to select the desired audio option
from the options described below, then press the ENTER
button.
Digital Output
General
Video
PCM Down Sampling
Dynamic Compression
5. Press the
buttons to select the desired item, then
Audio
press the ENTER button.
Language
Parental
Note:
Select the audio signal output when playing Dolby Digital disc. This setting affects
the output from the DIGITAL OUT (COAXIAL or OPTICAL) jack
・ Press the RETURN or
menu.
button to return to the previous
Press the SETUP button to exit the menu.
Digital Outpt
General
Video
Digital Output
S/PDIF
Digital Output: Select this when your equipment does not
decode Dolby Digital.
PCM Down Sampling
Dynamic Compression
HDMI Audio
Audio
Language
Parental
・ S/PDIF: Select this when your equipment connected Via
Optical / Coaxial cable.
・ HDMI Audio: Select this when your equipment connected
Via HDMI cable.
Select the output method from the S/PDIF out jack
PCM Down Sampling
General
Video
Digital Output
On
Off
・ On : Select this when the Amplifi er connected to the
player is not 96KHz compatible. 96KHz signals will be
down converted to 48KHz
PCM Down Sampling
Dynamic Compression
Audio
Language
Parental
・ Off : Select this when the Amplifi er connected to the
player is 96KHz compatible. Signals will be output
without any changes.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
System setup
Note:
・ Even when PCM Down Sampling is set to Off, some discs will only output down sampled audio through the
coaxial and optical digital outputs.
Digital Output - HDMI:
・ If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS), you should set
Digital Audio to PCM.
・ If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM Down Sampling to On.
Dynamic Compression
This is only active when a Dolby Digital signal is detected.
General
Video
Digital Output
On
Off
・ Off: You can enjoy the movie with the standard Dynamic
Range.
PCM Down Sampling
Dynamic Compression
Audio
・ On: When Movie soundtracks are played at low volume or
from smaller speakers, the system can apply
appropriate compression to make low-level content
more intelligible and prevent dramatic passages from
getting too loud.
Language
Parental
38
Download from Www.Somanuals.com. All Manuals Search And Download.
System setup
SETTING UP THE LANGUAGE OPTIONS
If you set the audio, subtitle, disc menu and player menu, in
advance, they will come up automatically every time you
watch a movie.
General
Video
1. With the unit in Stop mode, press the SETUP button.
Audio
2. Press the
buttons to select Setup, then press the
Language
Parental
ENTER button.
3. Press the
buttons to select Language Setup, then
General
Video
OSD
press the ENTER or
be displayed.
button. Language setup menu will
Audio
Audio
Subtitle
Disc Menu
Language
Parental
Select language for on-screen display
General
Video
OSD
English
Spanish
French
German
4. Press the
buttons to select the desired language
button.
Audio
option, press the ENTER or
Audio
Subtitle
Disc Menu
Language
Parental
・ Audio: For the disc audio language.
・ Subtitle: For the disc subtitles.
・ Disc Menu: For the disc menu contained on the disc.
・ OSD: For the on-screen menu of your Blu-ray Disc Player.
5. Press the
buttons to select the desired language,
then press the ENTER button.
Note:
・ Press the RETURN or
・ The selected language will only appear if it is supported on the disc.
button to return to the previous menu. Press the SETUP button to exit the menu.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
System setup
SETTING UP THE PARENTAL LOCK
The Parental Lock function works in conjunction with BD/DVDs that have been assigned a rating which helps
you control the types of BD/DVDs that your family watches. There are up to 8 rating levels on a disc.
Change the password
1. With the unit in Stop mode, press the SETUP button.
General
Video
Change Password
DVD Parental
BD Parental
Audio
Language
Parental
Change password for Parental control function
2. Press the
buttons to select Parental Setup, then
button.
press the ENTER or
Next screen
General
Video
Change Password
DVD Parental
BD Parental
Audio
Language
Parental
Set or change the password for "Parental control" function. Asked for entering
passwordwhen playing restricted disc or when charging the control level
3. The original password is "000000", if you want to change
the password, please press the buttons to select
Parental Setup, then press the ENTER or button.
Next screen
General
Video
Change Password
DVD Parental
BD Parental
Change Password
Password
When you operate your Blu-ray Disc Player for the first
time, the "Are you sure?" message will be
displayed. If "Yes" , please press ENTER button.
4. Enter the 6-digit password using the number buttons on
the remote control.
Audio
Language
Parental
New Password
Confirm Password
OK
Cancel
Set or change the password for "Parental control" function. Asked for entering
password when playing restricted disc or when charging the control level
The "Confirm the password" message will be displayed.
Enter your password again.
Press "OK" finish the password set.
Note:
・ Press the RETURN or
button to return to the previous menu.
・ Press the MENU button to exit the menu.
If you forgot your password
1. Remove the disc.
2. Press and hold the
button on the front panel for 5 seconds or more.
・ All settings will revert to the factory settings.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
System setup
Setting the DVD Rating Level
General
Video
Change Password
DVD Parental
BD Parental
1. Press the
buttons to select DVD Parental,
button.
then press the ENTER or
Audio
Language
Parental
Set DVD parental function
2. Select Change level, then press ENTER and the
"Change Parental level" will be display.
Parental Lock: Off
Pating Level: 7
General
Video
Change Password
DVD Parental
BD Parental
Audio
Language
Parental
Set DVD parental function
3. Input the 6-digital password2. Press the
buttons to select Off or the rating level you want,
then press the ENTER button. For example, if you
select up to Level 6, discs that contain Level 7, 8 will
not play.
Parental Lock: Off
Pating Level: 7
General
Video
Change Password
DVD Parental
BD Parental
Input password
Audio
A larger number indicates that the program is
intended for adult use only.
Language
Parental
Password
OK
Cancel
Level 1 is the most restrictive and Level 8 is the
least.
Set DVD parental function
Setting the BD Rating Level
Age Setting
General
Video
Change Password
1. Press the
buttons to select DVD Parental,
button.
DVD Parental
BD Parental
then press the ENTER or
Input password
Password
Audio
Language
Parental
2. Select Change level, then press ENTER and the
"Change Parental level" will be display.
OK
Cancel
Set the control level. The display asks for the password if the disc's pre-determined
ageestriction is higher than the age you set.
3. Input the 6-digital password2. Press the
buttons to select Off or the rating level you want,
then press the ENTER button. For example, if you
select up to Level 6, discs that contain Level 7, 8 will
not play.
Age Setting
General
Video
Change Password
DVD Parental
BD Parental
Age Setting
Audio
Please input viewer age limits
then press "ENTER".
Year(s)
A larger number indicates that the program is
intended for adult use only.
Language
Parental
Level 1 is the most restrictive and Level 8 is the
least.
_
Set the control level. The display asks for the password if the disc's pre-determined
_
_
ageestriction is higher than the age you set.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching a Movie
USING THE DISPLAY FUNCTION
1. During playback, press the INFO button on the
remote control.
2. Press the
buttons to select the desired item.
3. Press the NUMBER buttons to make the desired
setup and then press the ENTER button.
・ You may use the number buttons of the remote
control to directly access a title, chapter or to start
the playback from a desired time.
4. To make the screen disappear, press the INFO
button again.
Note:
・ If you are playing contents from the Info menu, in some cases, playback may malfunction
depending on the title.
・ Title : To access the desired title when there is more than one in the disc. For example, if there is
more than one movie on a BD/DVD, each movie will be identified as a Title.
・ Chapter: Most BD/DVD discs are recorded in chapters so that you can quickly fi nd a specific
passage.
・ Audio : Refers to the fi lm's soundtrack language. A BD disc can contain up to 32 audio languages
and a DVD up to 8.
・ Playing Time : Allows playback of the fi lm from a desired time. You must enter the starting time as
a reference. The time search function does not operate on some discs.
・ Subtitle : Refers to the subtitle languages available in the disc. You will be able to choose the
subtitle languages or, if you prefer, turn them off from the screen. A BD disc can contain up to 255
subtitle languages, and a DVD up to 32.
・ Angle : When a BD/DVD contains multiple angles of a particular scene, you can use the ANGLE
function.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching a Movie
USING THE TOP MENU & POP MENU
Using the Top Menu
1. During playback, press the DISC MENU button on the
remote control.
2. Press the
buttons to make the desired setup,
or ENTER button.
then press the
・ The Disc menu setup items may vary from disc to disc.
Note:
・ Depending on the disc, the Top Menu may not be available.
Using the Pop Menu
1. During playback, press the POP MENU button on
the remote control.
2. Press the
buttons or ENTER button to
select the desired menu.
・ The Pop menu setup options may vary from disc to
disc.
Note:
・ Depending on the disc, the Pop Menu may not be available.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching a Movie
REPEAT PLAY
Repeat the current chapter or title.
Repeat playback
1. During playback, press the REPEAT button on the remote
control. Repeat screen appears.
2. Press the REPEAT button to select.
Note:
Depending on the disc, the Repeat function may not be
available.
SELECTING THE AUDIO LANGUAGE
You can select a desired audio language quickly and easily with the AUDIO button.
Using the AUDIO button
1. Press the AUDIO button during playback. The Audio
changes when the button is pressed repeatedly.
・ The audio languages are represented by abbreviations.
2. To remove the AUDIO icon, press the RETURN button.
Using the INFO button
1. During playback, press the INFO button on the remote
control.
2. The information of the disc will be displayed on the screen.
3. Press the
or
to select Title or Chapter, then press
to select which Title or Chapter you want to go.
SELECTING THE SUBTITLE LANGUAGE
You can select a desired subtitle quickly and easily with the SUBT button.
Using the SUBT button
1. Press the SUBT button. The subtitle changes when the
button is pressed repeatedly. The subtitle languages are
represented by abbreviations.
2. To remove the SUBTITLE icon, press the RETURN button.
Note:
・ Depending on BD/DVDs, you may have to change the desired subtitle in the Disc Menu. Press the POP MENU
button.
・ This function depends on what subtitles are encoded on the disc and may not be available on all BD/DVDs.
・ A BD disc can contain up to 255 subtitle languages and a DVD up to 32.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching a Movie
CHANGING THE CAMERA ANGLE
When a BD/DVD contains multiple angles of a particular scene, you can use the ANGLE function.
Using the ANGLE function
1. During playback, press the ANGLE button on the remote
control.
2. Press the ANGLE button repeatedly to select the witch
mode you need.
Note:
・ If the disc has only one angle, this feature won't work.
Currently, very few discs have this feature.
・ Depending on the disc, these functions may not work.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to Music
PLAYING AN AUDIO CD (CD-DA)
1. Insert an Audio CD (CD-DA) into the disc tray.
For an audio CD, the first track will be played
automatically.
2. Press the
buttons to select the track you want to
play, and then press the ENTER button.
PLAYING AN Mp3 (with CD or USB memory stick)
1. Insert an MP3 disc into the disc tray or insert a USB memory
stick into the front USB connector (for USB, press the
SUBT/USB button to select enter into USB mode). The Menu
screen is displayed.
2. Press the
ENTER.
buttons to select Music (Audio), then press
・ The Music List is displayed.
3. Press the
buttons to select the MP3 fi le you want to
play, and then press the ENTER button.
AUDIO CD(CD-DA)/MP3 SCREEN ELEMENTS
Displays the media type.
Play Status Bar.
Displays the current play index, total track
number.
Current track (song)
Audio CD(CD-DA) : Displays the number of
the track currently being played.
MP3 : Displays the name of the track currently
being played.
Current /Total Play Time.
Displays available COLOR buttons.
see next page for Color button usage).
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to Music
BUTTONS ON THE REMOTE CONTROL USED FOR AUDIO CD (CD-DA)/ MP3 MUSIC PLAYBACK
1.
buttons: Selects a track(song) or a folder in Music
List or Playlist.
1
2. PLAY/PAUSE/STEP button: Plays the currently selected
track. If pressed during playback, the current track is
paused.
3
4
3
3.
buttons
: Moves to the applicable folder or plays the applicable
track, according to the current position.
: Moves to the parent folder.
1
4. ENTER button : Plays the selected track (song).
2
2
5. STOP (
6. NEXT (
) button: Stops a track (song).
) button: During playback, plays the next track.
5
6
Moves to the next page in the Music List or the Playlist.
7. PREV (
) button: Returns to the beginning of the
current track when pressed during playback. If pressed
again, your Blu-ray Disc Player moves to and plays the
previous track.
7
If you press this button within three seconds after
playback starts, the previous track will be played.
If you press this button after three seconds, the current
track will be replayed from the beginning.
Moves by the page in the Music List or the Playlist.
REPEAT AUDIO CD(CD-DA) & MP3
During playback, press the REPEAT button repeatedly to select the repeat mode you want.
When playing an Audio CD (CD-DA):
When playing an MP3 disc:
To return to normal playback:
Press the REPEAT button repeatedly to return to normal playback.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Pictures
VIEWING PICTURES (from CD or USB Memory Stick)
1. Insert a Picture disc into the disc tray or insert a USB memory stick into the front USB connector
(for USB, press the SUBT/USB button to select enter into USB mode). The Menu screen is displayed.
2. Press the
buttons to select Picture, then press ENTER. The Picture List is displayed.
・ Press
to select picture which you want to view.
ABOUT THE PLAY LIST
・ You can create play list when you play the media disc, the player will play the media according to the play list.
HOW TO CREATE A PLAYLIST
・ Refer listening music, viewing picture setup.
・ When you select a track , press
button, the dialog window will be shown:
・ Press
button to select "Play All, Add to Playlist, View Playlist, Sort by Name, Info.
・ Press ENTER button to confirm the disinfect items.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Pictures
ABOUT THE TITLE LIST
・ When you insert a media disc, the Title list will be display on the screen (for USB Memory Stick Playback,
insert the USB Stick into the front panel connector, press the SUBT/USB button to select enter into USB
mode before proceeding)
・ Press the
button to select AUDIO, VIDEO picture or ALL FILES.
LISTENING TO MUSIC
・
Press the
button to select AUDIO, then press ENTER.
・ Select the folder by press
button, press ENTER button.
・ Select the music list by press
button, then press ENTER button to play.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching Video
WATCHING VIDEO
1. Insert a video disc into the disc tray or insert a USB memory stick into the front USB connector
(for USB, press the SUBT/USB button to select enter into USB mode). The Menu screen is displayed.
2. Press the
buttons to select Video, then press ENTER. The Video List is displayed.
・
Select the folder by pressing
button, then press ENTER button.
・ Select the video list by pressing
button, then press ENTER button to play video.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Before requesting service, please check the following.
PROBLEM
SOLUTION
・ Check the batteries in the remote control. They may need
replacing.
・ Operate the remote control at a distance of no more than 20 feet.
・ Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote control to
reset it. Reinstall batteries and try to operate the remote control
again.
No operations can be performed
with the remote control
・ Ensure that the disc is installed with the label side facing up.
・ Check the region number of the BD/DVD.
Disc does not play
・ 5.1 channel sound is reproduced only when the following
conditions are met.:
(1). The Blu-ray disc player is connected with the proper Amplifier
(2). The disc is recorded with 5.1 channel sound.
・ Check whether the disc being played has the "5.1 ch" mark on the
outside.
5.1 channel sound is not being
reproduced
・ Check if your audio system is connected and working properly.
・ In a SETUP Menu, is the Audio Output set to Bitstream?
Disc Menu doesn't appear
・ Check if the disc has a Menu.
・ The features or action cannot be completed at this time because:
(1). The BD/DVD's software restricts it.
(2). The BD/DVD's software doesn't support the feature (e.g.,
angles).
The
icon appears on screen
(3). The feature is not available at the moment.
(4). You've requested a title or chapter number or search time
that is out of range.
・ Some of the functions selected in the Setup Menu may not work
properly it the disc is not encoded with the corresponding
function.
Play mode differs from the
Setup Menu selection
The screen ratio cannot be
changed
・ The Screen Ratio is fixed on your BD/DVDs.
・ Make sure you have selected the correct Digital Output in the
Audio Options Menu.
No audio
・ Press the
button (in front panel) for more than 5 seconds with
The screen is blocked
no disc inside. All settings will revert to the factory settings.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
PROBLEM
SOLUTION
If the HDMI output is set to a
resolution your TV cannot
・ Press the
support (for example, 1080p),
button (in front panel) for more than 5 seconds with
no disc inside. All settings will revert to the factory settings.
you may not see a picture on
your TV
・ Press the
button (in front panel) for more than 5 seconds with
Forgot password
no disc inside. All settings including the password will revert to the
factory settings. Don't use this unless absolutely necessary.
・ Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and
follow the procedure once again.
If you experience other problems
The picture is noisy or distorted
No HDMI output
・ Make sure that the disc is not dirty or scratched.
・ Clean the disc.
・ Check the connection between the TV and the HDMI jack of the
Blu-ray disc player.
・ Check if your TV supports 480p/720p/1080i/1080p HDMI input
resolution.
・ If random noise appears on the screen, it means that TV does not
support HDCP (High-bandwidth Digital Content Protection).
Abnormal HDMI output screen
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Power Requirements
Power Consumption
Weight
AC 120V, 60Hz
29W
9.3 lbs
General
Dimensions
16.9 (W) x 12.8 (D) x 3.1 (H) inches
+41ｰF to +95 ｰF
Operating Temperature Range
Operating Humidity Range
BD (Blu-ray Disc)
10% to 75%
Reading Speed: 4.917 m/sec
Reading Speed: 3.49 ~ 4.06 m/sec
Approx. Play Time (Single Side, Single Layer Disc): 135 min
Reading Speed: 4.8 ~ 5.6 m/sec
DVD (Digital Versatile Disc)
CD: 5 inches (COMPACT DISC)
Disc
CD: 3 1/2 inches (COMPACT DISC)
Maximun Play Time: 74 min
Reading Speed: 4.8 ~ 5.6 m/sec
Maximun Play Time: 20 min
1 channel: 1.0 Vp-p (75ｦ load)
Blu-ray Disc: 480i
Composite Video
Component Video
DVD: 480i
Y: 1.0 Vp-p (75ｦ load)
Pr: 0.70 Vp-p (75ｦ load)
Pb: 0.70 Vp-p (75ｦ load)
Video Output
Blu-ray Disc: 1080i, 720p, 480p, 480i
Luminance Signal: 1.0 Vp-p (75ｦ load)
Chrominance Signal: 0.3 Vp-p (75ｦ load)
Blu-ray Disc: 480i
DVD: 480p, 480i
S-Video
DVD: 480i
1080p, 1080i, 720p, 480p
HDMI
Video/Audio
PCM multichannel audio, Bitstream audio, PCM audio
L (1 / L), R (2 / R)
2 Channel
F/L, F/R, R/L, R/R, C/T, S/W
Optical / Coaxial
5.1 Channel
Digital Audio Output
Frequency Response
48 kHz Sampling: 4 Hz to 22 kHz
96 kHz Sampling: 4 Hz to 22 kHz
110 dB
Audio Output
S / N Ratio
100 dB
Dynamic Range
Total Harmonic Distortion
0.003%
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Continental Electric Coffeemaker CE23601 User Manual
Craftsman Drill 1372191 User Manual
Dynex TV Mount DX DRTVM102 User Manual
Earlex Ventilation Hood VAP75 User Manual
Extron electronic Stereo Receiver VS50 SL User Manual
Fostex Car Speaker FF225K User Manual
Garmin Electric Heater 675 User Manual
GBC Paper Shredder 1036S 2 User Manual
Gefen Home Theater System Home Theater Scaler PLUS User Manual
Gefen Log Splitter GTB HD4K2K 144 User Manual