OWNER'S MANUAL
5.8 GHz Cordless Telephone
Caller ID with Call Waiting
PLEASE READ BEFORE OPERATING THIS EQUIPMENT
Model : TC590
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Outgoing Calls .........................................................................................22
Function Settings ..................................................................................................23
A. Setting the Ringer Level ..........................................................................24
B. Changing the Language ..........................................................................24
C. Turning the First Ring ON or OFF ............................................................25
D. Setting the Time and Date .......................................................................25
E. Adjusting the Contrast .............................................................................26
F. Setting the PBX Number .........................................................................26
G. Changing the Flash Time ........................................................................26
H. Changing the Pause Time .......................................................................27
I. Programming One-Touch Voice Mail Dialing ...........................................27
J. Deleting Message Waiting Indication .......................................................28
K. Setting the Area Code .............................................................................28
Multi-Handset System Operation ...........................................................................29
Prepare for Use .............................................................................................29
Transfer Call .................................................................................................29
Security System ....................................................................................................30
Recharging the BATTERY PACK ..........................................................................31
Changing the BATTERY PACK .............................................................................31
Problem Solving ....................................................................................................32
Technical I information ..........................................................................................34
FCC Requirements ...............................................................................................35
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, electric shock and/or injury, always follow these
basic safety precautions when using your cordless telephone equipment.
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the telephone.
3. Do not use this telephone near a bathtub, wash bowl, kitchen sink, or laundry tub, in a
Wet basement, near a swimming pool, or anywhere else where there is water.
4. Avoid using a telephone (other than a cordless type) during an electrical storm. There
may be a remote risk of electric shock from lightning.
5. Do not use the telephone to report a gas leak in the vicinity of the leak.
6. Use only the power cord and BATTERY PACK indicated in the Owner’s Manual. Do not
dispose of the BATTERY PACK in a fire. The BATTERY PACK may explode. Check with
local codes for possible special disposal instructions.
7. Operate this telephone using the electrical voltage as stated on the BASE UNIT or in
the Owner’s Manual. If you are not sure of the voltage in your home, consult your dealer
or local power company.
8. Unplug this telephone from the wall outlet before cleaning or replacing the BATTERY
PACK. Do not use liquid cleaners or aerosol cleaners on the telephone. Use a damp cloth
for cleaning.
9. Place this telephone on a stable surface. Serious damage and/or injury may result if
the telephone falls.
10. Do not cover the slots and openings on this telephone. This telephone should never
be placed near or over a radiator or heat register. This telephone should not be placed in
a built-in installation unless proper ventilation is provided.
11. Do not place anything on the power cord. Install the telephone where no one will
step or trip on the cord.
12. Do not overload wall outlets or extension cords as this can increase the risk of fire or
electric shock.
13. Never push any objects through the slots in the telephone. They could touch
dangerous voltage points or short out parts that could result in a risk of fire or electric
shock. Never spill liquid of any kind on the telephone.
14. To reduce the risk of electric shock, do not take this telephone apart. If service or
repair work is required on this telephone, take it to a qualified service representative.
Opening or removing covers may expose you to dangerous voltage or other risks.
Incorrect reassembly can cause electric shock when the appliance is subsequently
used.
15. Unplug this telephone from the wall outlet and consult a qualified service
representative in any of the following situations.
A. When the power supply cord is frayed or damaged.
B. If liquid has been spilled into the telephone.
C. If the telephone has been exposed to rain or water.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
D. If the telephone does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions. Improper
adjustment may require extensive work by a qualified technician to restore the
telephone to normal operation.
E. If the telephone has been dropped or the case has been damaged.
F. If the telephone exhibits a distinct change in performance.
16.
17.
Never install telephone wiring during a lightning storm.
Never install telephone jacks in wet locations unless the jack is specifically designed
for wet locations.
18.
19.
Never touch uninsulated telephone wires or terminals unless the telephone line has
been disconnected at the network interface.
Use caution when installing or modifying telephone lines.
Battery Safety
CAUTION:
Danger of explosion if BATTERY PACK is incorrectly replaced. Replace only
with the same or equivalent type. To reduce the risk of fire or personal injury,
read and follow these instructions:
1. Use only the following type and size of BATTERY PACK:
3.6VDC, 600mAh Rechargeable Ni-MH BATTERY PACK
2. Do not dispose of the BATTERY PACK in a fire. It may explode. Check with local codes
for possible special disposal instructions.
3. Do not open or mutilate the BATTERY PACK. Released electrolyte from a BATTERY
PACK is corrosive and may cause damage to the eyes or skin. Electrolyte may be toxic
if swallowed.
4. Exercise care in handling the BATTERY PACK to prevent shorting the BATTERY PACK
with conductive materials such as rings, bracelets and keys. The BATTERY PACK or
conductor may overheat and cause burns.
5. Charge the BATTERY PACK provided with (or identified for use with) this telephone only
in accordance with the instructions and limitations specified in this manual.
6. Observe proper polarity orientation between the BATTERY PACK and BATTERY
CHARGER.
SAVE THESE INSTRUCTIONS
ATTENTION:
The telephone that you have purchased contains a rechargeable BATTERY PACK. The
BATTERY PACK is recyclable. At the end of its useful life, under various state and local laws,
it may be illegal to dispose of this BATTERY PACK into the municipal waste stream. Check
with your local solid waste officials for details in your area for recycling options or proper
disposal.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
HANDSET Controls
5
Download from Www.Somanuals.com. All Manuals Search And Download.
HANDSET Controls
1. OGCall (Outgoing call) button (ꢀ): Press and to view the last outgoing call
number(see page 22 for detail)
2. Voice Mail/Menu (Manual) Button: (Voice Mail) Press to automatically dial the Voice
Mail Post Code in your area to access your Voice Mail message. (Menu)Press to access
the special functions operation in STANDBY mode. (For special functions see pages
23~28. )
3. Scan/Del (Delete) Button: (Scan) Press to change the operating channel when you
hear interference. (Del) Press to delete items or individual characters.
4. Flash/Edit Button: (Flash) Press to answer a call if you have Call Waiting. (Edit) Press
to edit listed items.
5. HEADSET JACK: For connecting your headset plug to enjoy hands-free
communication. (See page 13 for detail.)
6. TELEPHONE KEYPAD Buttons: Allows you to make a call depending on pressed
button. (For TELEPHONE KEYPAD characters, see page 19.).
7. Temporary Tone (*) Button: Press to temporarily change the DIALING mode from
PULSE to TONE for Rotary Service Users. (Press once before entering numbers to
access the answering system or electronic banking services, etc.).
8. New Call/Msg Waiting ( Message Waiting ) LED Indicator: (New Call) Red LED
blinks to indicate that you have a new Caller ID call stored in memory. (Message
Waiting) Green LED blinks when receiving a Message Waiting signal, if you have
subscribed to a Voice Mail message service from your local telephone company.
(See page 15.).
9. Large LCD Screen: Shows call information, phone status, prompts and
DIRECTORY (PHONE BOOK) items.
10. Vol (Volume) button( ꢁ ): During TALK mode, press to adjust the receiver volume to
a comfortable listening level. (see page 13 for detail)
11. Dir (Directory)/ESC (Escape) Button: (Dir) Press to access names and numbers
stored in the DIRECTORY (PHONE BOOK) (See pages 18 to 22 for details.).(Esc)
Press to cancel the ongoing operation and return to STANDBY mode.
12. SCROLL UP ꢂ - DOWN ꢃ Button: Press to move around the large LCD Screen.
Trans (Transfer call) button( ꢂ ): Press to transfer a call from this Handset to
another enrolled in the system (see page 29 for detail)
13. Re (Redial)/Pa (Pause)/Save Button: (Re) Press to redial the last number you dialed.
(Pa) Press to insert a pause while dialing. (You will need the Re/Pa/Save button to dial
numbers which use an alternative Long Distance Access Code.) (Sa) Press and hold
down to save the changes on the listed items.
14. Talk Button: Press to answer an incoming call or to place a call. Press to end a call.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
15. Option (#) Button: (Option) Press to change the displayed telephone number into 7,
10, or 11 digit DIALING mode during Caller ID callback.
16. Microphone:
17. CHARGE CONTACTS: For charging the BATTERY PACK inside the HANDSET. We
recommend cleaning the CHARGE CONTACTS periodically with a damp cloth.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
BASE UNIT Controls
1. POWER-IN CONNECTION JACK
2. TELEPHONE LINE CONNECTION JACK
3. BASE UNIT ANTENNA
4. PAGE Button: Press to page the HANDSETS.
5. CHARGE TERMINALS: For charging the HANDSET BATTERY PACK. For best
performance, clean the CHARGE TERMINALS periodically with a damp cloth.
6. TONE/PULSE Select Switch
7. IN USE/CHARGE LED Indicator: (IN USE) Lights up to indicate that the
HANDSET is in TALK mode. (CHARGE) Lights up when the HANDSET is
placed on the BASE UNIT for charging.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Connecting Your Phone
This section is a reference guide to the basic functions and operations of your
cordless telephone. For more detailed descriptions of the operations and features
of this telephone, refer to the Contents on page 1.
1. Carefully remove your cordless telephone from its shipping carton. If there is
any visible damage, do not attempt to operate this equipment. Return it to the
place of purchase.
2. Check to be sure you have all items that come with this cordless telephone
system. You should have a HANDSET, BASE UNIT, AC ADAPTOR, BATTERY
PACK, TELEPHONE LINE CORD, BELT CLIP and Owner’s Manual.
3. Insert the small plug on the end of the AC ADAPTOR into the POWER-IN
CONNECTION JACK at the bottom of the BASE UNIT.
4. Plug the AC ADAPTOR into a 120V AC wall outlet.
USE ONLY WITH CLASS 2 POWER SOURCE
9V DC, 300mA for the BASE UNIT
9V DC, 100mA for the CHARGER UNIT
5. Insert one plug of the TELEPHONE LINE CORD into the house TELEPHONE
JACK and the other end into the TELEPHONE LINE CONNECTION JACK at the
bottom of the BASE UNIT. (If you have an older 4-prong TELEPHONE JACK,
you will need an RJ-11C TELEPHONE JACK ADAPTOR. This adaptor is
available at the same place you purchased your telephone.)
6. We recommend not placing this unit next to appliances. Doing so may cause
interference.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
7. Install the HANDSET BATTERY PACK by
plugging it into the BATTERY CONNECTOR
inside the BATTERY COMPARTMENT.
8. Place the BATTERY PACK inside the
BATTERY COMPARTMENT.
9.
Slide
the
HANDSET
BATTERY
COMPARTMENT COVER firmly into place in
its closed position.
10. IMPORTANT: Before initial use, charges the
HANDSET for 12 hours. Place the HANDSET
on the BASE UNIT or CHARGER UNIT with
TELEPHONE KEYPAD face up, and make
sure that the CHARGER UNIT LED indicator
lights up.
11. TONE/PULSE Select Switch:
A. If your home is equipped with a tone dialing
system, set the TONE/PULSE Select
Switch to the TONE position.
B. If you have a rotary dialing system, set the TONE/PULSE Select Switch to
the PULSE position.
C. If you are not sure which system you have, set the TONE/PULSE Select
Switch to the TONE position. Press the Talk button on the HANDSET and
make a call. If the call connects, leave the switch as is; otherwise set to the
PULSE position.
12. Set the date and time on the HANDSET. (See page 25 for details.)
Belt Clip Installation
With the back of the HANDSET facing up, insert one side of the BELT CLIP HOOK
into the matching slot at the top side of the HANDSET. Press down on the opposite
side of the BELT CLIP until the other hook locks into the slot on the side of the
HANDSET.
CAUTION: The cordless telephone operates
at a frequency that causes interference to
nearby TVs and VCRs or Microwave; the
BELT CLIP
HOOK
base phone should not be placed near, or on
top of
a
TV ,VCR or Microwave. If
interference is experienced, moving the
cordless telephone farther away from the
TV/VCR/Microwave will often reduce or
eliminate the interference.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Cordless Telephone Operation
Preparing for Use
Before you can use your cordless telephone, you must charge the HANDSET for 12
hours. Failure to do so will require recharging of the BATTERY PACK more often.
1. Place the HANDSET on the BASE UNIT/CHARGER UNIT for 12 hours.
2. After 12 hours, remove the HANDSET from the BASE UNIT/CHARGER UNIT.
Before you can use your cordless telephone, you must charge the
HANDSET for 12 hours. Failure to do so will require more frequent charging
of the BATTERY PACK.
NOTE: Depending on the frequency of use, once the HANDSET is fully charged, it
remains functional for approximately 4 hours of continuous use and approximately 4
days when the HANDSET is off the BASE UNIT or CHARGER UNIT in STANDBY
mode.
If your have
a
more than one HANDSET, please see page 29 for
multi-HANDSET system for preparing.
Receiving Calls
1. When the phone rings, the LCD Screen will show “RING….” If you have Caller ID, the
LCD Screen will show the Caller ID information after the first ring.
2. With the HANDSET off the BASE UNIT/CHARGER UNIT, press the Talk button. Start your
conversation. The Call Timer starts to count.
3. To end your conversation, either press the Talk button or place the HANDSET on the
BASE UNIT. If you place the HANDSET on the BASE UNIT CHARGE CRADLE, you
activate the AUTOMATIC STANDBY feature.
NOTE: The Call Timer will start to count once you press the Talk button.
Minutes
Seconds
TALK
min
sec
01
45
Call Timer Display
NOTE: While the 5.8GHz frequency is inherently clearer, we suggest that you do not
use this phone within 20 feet of a working microwave. The microwave produces
frequencies in this range which may cause interference. This interference is normal
for all 5.8 GHz phones and should not be considered a product defect.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Cordless Telephone Operation
Placing Calls
1. Press the Talk button, the Call Timer
starts to count.
2. Wait until you hear a dial tone and then
dial the phone number.
3. When you have finished your call, press
the Talk button again or place the
HANDSET on the BASE UNIT.
TALK
DIAL?
min
sec
01
45
OR
1. Dial the phone number.
2. Press the Talk button. The number
displayed will be dialed.
3. When you have finished with your call,
press the Talk button again or place the
HANDSET on the BASE UNIT.
511-825-3736
Redial Feature
1. If you get a busy tone, press the Talk button or place the HANDSET on the
BASE UNIT to hang up.
2. Later, press the Talk button again.
3. Listen for a dial tone.
4. Press the Re/Pa/Save button. This will automatically redial the last telephone
number you called.
5. When you have finished with your call, press the Talk button again or place the
HANDSET on the BASE UNIT.
NOTE:
If you are too far away from the BASE UNIT, the HANDSET emits “beep” sounds to
warn you that the background noise level is too high for proper communication
between the HANDSET and the BASE UNIT. When you hear this sound, you
should move closer to the BASE UNIT to reduce the noise level. Otherwise, the
call will automatically cut off.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Cordless Telephone Operation
HANDSET Volume Control
1. To adjust the HANDSET receiver volume
level while having a conversation, press the
Vol(Volume) button (ꢁ) button. The LCD
Screen will display “VOLUME”
VOLUME
min
min
sec
sec
01
45
45
2. Press the SCROLL UP ꢂ or DOWN ꢃ
button to select the desired setting of Low,
Medium, High or Maximum.
VOLUME
3. After volume setting, press vol (ꢁ)button
or Esc button to the TALK mode.
01
Using the Headset Feature
Your telephone can utilize a headset (not included) to be connected to your
HANDSET for you to enjoy hands-free communication.
Insert the small plug on the end of the
headset into the HEADSET JACK at the left
side of the HANDSET. Follow the
procedures discussed in “Receiving Calls”
and “Placing Calls” to receive and place a
call.
NOTE:
When you plug the headset plug into the
HEADSET JACK it automatically mutes
the MICROPHONE and SPEAKER of the
HANDSET. Unplug the headset to return
the HANDSET to normal use.
Headsets are available at most retail
outlets that sell telephone equipment. The
HEADSET JACK is compatible with 2.5
mm headset plugs only.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID System Operation
Caller ID System
This telephone automatically displays an incoming caller’s name and telephone number
together with the date and time of the call. It records up to 50 calls and stores the data in
Memory.
IMPORTANT: You must subscribe to the Caller ID service from your local telephone
company to utilize this feature.
Viewing Caller Information During Incoming Calls
1. When there is an incoming call, the name and the telephone number of the caller will
automatically appear after the first ring. Press the SHIFT LEFTꢀor RIGHTꢁbutton to view
a name or number with more than 11 characters (as indicated by the arrows in the top line of
the display).
OR
Caller’s telephone number and “UNKNOWN” will appear
if the caller’s name is not available.
UNKNOWN
551 1604 5212
10:11 AM10/18 NEW1
Total1
OR
OR
Caller’s telephone number and “UNKNOWN” will appear
when Caller ID information is not available. The origin
of the call does not support the Caller ID system (including international calls).
“DATA ERROR” will appear when the Caller ID information was received incorrectly or only
part of the data was received.
NOTE: When an error is received, none of the data from this call is saved in memory.
OR
PRIVATE
“PRIVATE” or “OUT OF AREA” will appear if the caller’s name
and/or telephone number is blocked. .
- - - - - - - P - - - - - -
10:11 AM10/18 NEW1
Total1
OR
OUT OF AREA
LCD MSG Icon will appear when a Voice Mail Message has
been received and is stored by the Message Waiting service
provided by the telephone company.
- - - - - - - 0 - - - - - -
10:11 AM10/18
NEW1
Total1
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID System Operation
Caller ID with Call Waiting
When you subscribe to Call Waiting service from your local telephone company, this
telephone will display the name and number of the second caller while you are having a
phone conversation with the first caller.
First
Caller
When a new call comes in while you are talking, you will
hear a notification beep from the HANDSET and the
volume is momentarily muted. The new caller’s name and
phone number, if available, appears on the display.
1. When you receive a “Call Waiting” call and you
Second
Caller
want to connect the call, press the Flash/Edit
button and start talking with the second caller. The
active call will be placed on hold.
2. Press the Flash/Edit button to alternate between
calls.
3. Press the Talk button or place the HANDSET on the BASE UNIT to end the call.
“MSG” (Message Waiting)
The Message Waiting LED indicator will blink when there is a
message for you from your telephone company if you have
MSG
subscribed to Voice Mail message service and if you have
RING: HI
requested Visual Message Indication from your local
HS - #
telephone company. (To remove the MSG WAITING indicator,
see page 28.)
10:11 AM10/18 NEW1
Total1
Note: This function requires voice mail subscription from the
local telephone company. Furthermore, the local phone company must provide a type of
voice mail signaling called “FSK” (Frequency Shift Key). Not all telephone companies
have the visual message waiting feature available. Please contact your local telephone
company to check if this is available in your area.
One-Touch Voice Mail Dialing
When the setting is programmed in the Functions menu (see “Programming One-Touch
Voice Mail Dialing” on page 27) you can dial out a programmed number at the touch of a
button. This feature is specifically designed to easily check voice mail when you have
that service through your local telephone company.
1. Press the Talk button to access the telephone line.
2. Press the Voice Mail/ Menu button.
3. The phone will automatically dial the number.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID System Operation
Caller List
This phone automatically stores the last 50 calls received. It records call information such as
caller’s name and telephone number together with the date and time of the call. The NEW
CALL LED indicator will blink to indicate that you have a new Caller ID call stored in
memory.
Viewing the Caller List
INCOMING
1. With the HANDSET in STANDBY mode, press the
SCROLL UPꢂor DOWNꢃbutton. The LCD Will Display
“INCOMING”.
NEW1
Total1
2
Press the SCROLL DOWN ꢃ, any unviewed (new) calls
will be displayed first. The most recent call will be
displayed. The information on the call will be displayed with
the name, number, date, and time that the call was
received.
John Smith
1 – 604 - 555 - 1212
10:11 AM 10/18 2min 15sec
3. To scroll to the next call, press the SCROLL UP ꢂ or
DOWNꢃ button. Pressing the SCROLL DOWN button ꢃ
will go through the calls from the last call received to the first Caller ID record.
Pressing the SCROLL UPꢂ button will allow you to view the calls from the first call
received to the last.
4. Press the SHIFT LEFTꢀor RIGHTꢁbutton to view a name or number with more
than 11 characters (as indicated by the arrows in the top line of the display).
5. Press the Dir/Esc button to return to STANDBY mode.
Placing a Call from the Caller List
You can place a call from the Caller List by using the Caller ID CALLBACK feature.
1. Press the SCROLL UP
call back.
or DOWN
button to find the Caller ID record you wish to
2. Press the #/Option button to change the
displayed number to 7, 10, or 11 digits . The
first dialing option displayed is the 11 digits for
a long distance call.
John Smith
First press
1 – 604 - 555 - 1212
10:11 AM10/18 NEW1
Total1
Press the #/Option button for the second time,
the displayed number will change to 7 digits
for a local call.
John Smith
555 - 1212
10:11 AM 10/18 NEW1
Second press
Total1
Press the #/Option button for the third time,
the displayed number will change to 10 digits
for a local call with area code.
John Smith
Third press
3. Press the Talk button to dial the displayed
number.
604 - 555 - 1212
10:11 AM10/18 NEW1
Total1
4. To end a call, either press the Talk button or
place the HANDSET on the BASE UNIT.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID System Operation
Storing Caller ID Records into the DIRECTORY (PHONE BOOK)
1. Press the SCROLL UP ꢂ or DOWN ꢃ button to find the record you wish to store
into the DIRECTORY (PHONE BOOK).
2. Press and hold the Re/Pa/Save button.
3. The display will show “SAVED.”
SAVED
4. If you wish to edit the newly stored number, you can edit it in the DIRECTORY
(PHONE BOOK), or press Flash/Edit button to edit it (page 20, “Editing a Stored
Number”), and press and hold the Re/Pa/Save button to save to the DIRECTORY
(PHONE BOOK)
5. Press the Dir/Esc button to return to STANDBY mode.
Deleting Caller ID Records
When viewing the Caller ID information you can delete a single call record or all of
the call records.
Deleting a Single Record
1. Press the SCROLL UP ꢂ or DOWN ꢃ button to find the record you wish to
delete.
2. Press the Scan/Del button. The LCD Screen will display “ERASE ITEM?”
3. To delete the record, press the Scan/Del button again, a long beep will be heard.
The LCD Screen will show next Call ID item.
4. Press the Dir/Esc button to exit the Caller ID list.
Deleting All Records
1. Press the SCROLL UP ꢂ or DOWN ꢃbutton, the LCD displayed “INCOMING”.
2. Press and hold the Scan/Del button. The LCD Screen will prompt “ERASE ALL?”
CALLS
ERASE ALL?
Total10
3. To delete all of the Caller ID records, press the Scan/Del button. A long beep
will be heard and return to STANDBY mode
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID System Operation
Name and Telephone Number DIRECTORY (PHONE BOOK)
This DIRECTORY (PHONE BOOK) lets you scroll through the list to find the person you need
for one touch dialing. You can store up to 40 names and telephone numbers in the Memory.
Viewing the DIRECTORY (PHONE BOOK)
1. Press the Dir/Esc button.
2. Press the TELEPHONE KEYPAD 2 /ABC to 9 /WXYZ button
that corresponds to the first letter of a Caller’s name (a triple
“beep” will sound if no entries are stored under those letters).
Press the SCROLL UP or DOWN button to find the record
you wish to view.
3. Press the LEFTꢀor RIGHTꢁ button to view a name or
number with more than 11 characters (as indicated by the
arrows in the top line of the display).
4. Press the Dir/Esc button to exit the DIRECTORY (PHONE
BOOK).
Storing Phone Numbers
1. With the HANDSET in STANDBY mode, press the Dir button.
2. Press the Flash/Edit button to create a new DIRECTORY (PHONE BOOK) entry.
3. Enter the name you wish to store using the TELEPHONE KEYPAD 2/ABC to 9/WXYZ
buttons to enter the name, (see page 19 for detail) you can store up to 18 letters. To
move the cursor to the right, create a space or to enter a new letter, press the RIGHT
button ꢁ
.
4. Press the SCROLL DOWN ꢃ button, and dial the telephone number you wish to
store using the TELEPHONE KEYPAD 0 to 9 buttons. You can store up to 22 digits.
Briefly press the Re/Pa/Save button to insert a pause into the number.
5. Press and hold the Re/Pa/Save button to store the number into memory.
NOTES:
1. If there are no memory locations left in the speed dial DIRECTORY
(PHONEBOOK) the LCD Screen will display “MEMORY FULL.” To continue with
memory programming, you must delete or edit existing speed dial numbers.
2. If you miss-type entering the phone number, you can move through the number
and edit it by pressing the SHIFT RIGHT or LEFT button. To delete a character or
number inside the cursor, press the Scan/Del button.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID System Operation
Telephone Keypad Characters
The TELEPHONE KEYPAD buttons are used to enter characters when entering names
and numbers. Press the appropriate TELEPHONE KEYPAD button to get the following
characters. You can store a maximum of 18 characters on the letter icon and a maximum
of 22 digits on the number icon.
Keypad
Buttons
1st
2nd
3rd
4th
5th
6th
7th
8th
9th
Press Press Press Press Press Press Press Press Press
1
2
3
Space 1
&
C
F
‘
(
)
.
Space 1
A
D
B
E
a
d
b
e
c
f
2
3
A
D
B
E
4
5
6
G
J
H
K
N
I
g
j
h
k
n
i
4
5
6
G
J
H
K
N
L
O
l
M
m
o
M
7
8
9
0
P
T
Q
U
X
0
R
V
Y
0
S
t
p
u
w
0
q
v
x
0
r
s
T
z
0
7
U
9
0
8
y
0
W
0
Z
0
*
*
*
*
*
*
*
*
*
*
#
#
#
#
#
#
#
#
#
#
EXAMPLE:
If you want to enter the name “CLEO” with telephone number “6466867,” dial this
sequence:
1. Press the Dir button.
2. Press the Flash/Edit button to create a new DIRECTORY (PHONE BOOK) entry.
3. Press the following TELEPHONE KEYPAD buttons to get the desired letters:
TELEPHONE KEYPAD BUTTON
L ET T ER
2 2 2
5 5 5
3 3
6 6 6
C
L
E
O
4. Press the SCROLL DOWNbutton to move the cursor to the number icon.
5. Press the TELEPHONE KEYPAD 0 to 9 buttons to get the desired numbers.
6. Press and hold the Re/Pa/Save button to store the data in the DIRECTORY
(PHONE BOOK) memory.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID System Operation
Placing Calls from the DIRECTORY (PHONE BOOK)
1. Press the Dir button.
2. Press the SCROLL UP or DOWN button to find the record you want to call.
OR
Press a TELEPHONE KEYPAD (2/ABC to 9/WXYZ) that corresponds to the first letter
of a Caller’s name. Press the SCROLL UP or DOWN button to find the record you
wish to call.
3. Press the Talk button to dial the displayed number.
4. To end the call, either press the Talk button or place the HANDSET on the BASE
UNIT.
Editing a Stored Number in the DIRECTORY (PHONE BOOK)
1. Press the Dir button.
2. Press the SCROLL UP or DOWN button to find the record you wish to edit.
3. Press the Flash/Edit button. The entry will display with a flashing prompt over the
first character.
4. Move the cursor to the letter or number you wish to edit by pressing the SCROLL UP or
DOWN , SHIFT RIGHT or LEFT button.
To erase a character or digit, press the Scan/Del button.
To add a letter or number, use the TELEPHONE KEYPAD 0 to 9 buttons. Characters or
numbers will be inserted in front of the cursor (See page 19 for details.)
5. When the entry is edited as you desire, press and hold the Re/Pa/Save button to store
the edited record.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID System Operation
Deleting a Stored Number in the DIRECTORY (PHONE BOOK)
1. Press the Dir button, the LCD display “PHONE BOOK”.
2. Press the SCROLL UPꢂ or DOWN ꢃ button to find the record you wish to delete.
3. Press the Scan/Del button. The LCD screen will display “ERASE ITEM?”
4. To delete the record, press the Scan/Del button again.
5. Press the Dir/Esc button to return to STANDBY mode.
Deleting All Stored Number in the DIRECTORY (PHONE BOOK)
1. Press the Dir button, the LCD display “PHONE BOOK”.
2. Press and hold Scan/Del button. The LCD screen will display “ERASE ALL?”
DIR
ERASE ALL?
Total10
3. To delete all of the DIRECTORY records, press the Scan/Del button. A long beep will be
heard and return to STANDBY mode.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID System Operation
PREFERRED CALLS
You can assign stored numbers a PREFERRED CALL
status. When an incoming call is matched to a stored
number designated as preferred, the phone will generate
a special ringer sound after the Caller ID information is
received.
When you are saving the name and number into the DIRECTORY (PHONE BOOK), add
a “#” symbol at the beginning of the name by pressing
the #/Option button.
BLOCKED CALLS
You can assign stored numbers a BLOCKED CALL
status. When an incoming call is matched to a stored
number designated as blocked, the phone will not ring
after the Caller ID information is received.
When you are saving the name and number into the DIRECTORY (PHONE BOOK), add
an “*” symbol at the beginning of the name by pressing the * button.
OUTGOING CALLS
This telephone remembers the last 20 OUTGOING CALLS. The time, date, and the
duration of the call are recorded.
1. With the HANDSET in STANDBY mode, press the SHIFT
OUTGOING
LEFTꢀbutton. The LCD Screen will display “OUTGOING”,
and the total numbers of outgoing calls.
Total10
2. Pressing the SCROLL DOWNꢃbutton will go through the
calls from the last to the latest OUTGOING CALL record.
Pressing the SCROLL UPꢂbutton will allow you to view
the calls from the latest call to the last.
John Smith 10
1 – 604 - 555 - 1212
10:11 AM 10/18 2min 15sec
3. The called name and the umbers will displayed when the
name and the numbers are stored in the DIRECTORY
(PHONEBOOK).
4. If the called name and telephone number are not stored in
DIRECTORY(PHONEBOOK), the LDC will display “OUTGOING” and the called numbers.
5. To delete the records of OUTGOING, same as delete call ID records. (See page 17 for
details.)
6. To make a follow-up call, press the TALK button to dial the displayed record
.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID System Operation
Function Settings
You can change the setting on the HANDSET in the functions menu. Access the functions
menu by pressing the Voice Mail/Menu button.
There are 11 settings in the functions menu which can be changed. You can scroll through
the function menu in the listed order by pressing the SCROLL DOWN button ꢃ.
Settings can be accessed by pressing the corresponding TELEPHONE KEYPAD button. To edit
a setting, press the Flash/Edit button, use the SCROLL UPꢂ or DOWNꢃ button or
digital button 1- 0 and # to toggle between the setting options, and then press and hold the
Re/Pa/Save button to save the changes. Press the Dir/Esc button to exit the functions
menu.
TELEPHONE Function
KEYPAD
Ring Hi/Low/Off: Changes the volume of the ringer on the HANDSET or
turn the ringer OFF.
Language: Changes the language that appears on the LCD Screen.
Choose between English, French, or Spanish.
First Ring On/Off: Turns the first ring of the phone OFF so that it does
not ring until Caller ID information has been displayed. Particularly useful
when using the PREFERRED and BLOCKED CALL features or the
PRIVATE and UNKNOWN ring settings.
Time Set: Changes the time and date.
Contrast: Adjusts the brightness of the LCD Screen for optimum
viewing.
PBX Number: Inserts if a “PBX Number” before an outgoing number is
dialed. Select the number (0-9) which is required to access an outside
line when using a switchboard system, and the phone will auto-
matically dial the PBX number and a pause before any speed dial or
Caller ID callback number. Factory setting is “OFF.”
Flash Time: Changes the flash time to accommodate the phone
service in your area.
Pause Time: Changes the number of seconds that a pause lasts when
using programmed pauses in your speed dial numbers or after your
PBX number.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID System Operation
TELEPHONE Function
KEYPAD
Voice Mail: Programs the one-touch number that enables easy access to the
voice mail service provided by your telephone company.
MSG Waiting Delete: Clears current message waiting indication.
Area Code: Allows the programming of a home Area Code where 7-digit
dialing is used for ease of callback and other features (do not program if you
use 10-digit dialing to call numbers in your area).
NOTE: At any time during options programming you can quit and the settings that
you have changed will be saved. Press the Dir/Esc Button to quit the options
menu or let the options programming time out by not pressing any TELEPHONE
KEYPAD buttons for 20 seconds.
A. Setting the Ringer Level
1. Press the Voice Mail/Menu button to enter the menu.
2. Press the 1 button or press the SCROLL DOWN button 1 time go to the RING
programming option.
3. Press the Flash/Edit button to change the setting. “HI” will begin flashing.
3. Press the SCROLL UP or DOWN button or number 1-3 to select between HI,
LOW, and OFF.
4. W hen the desired setting is displayed, press and hold the Re/Pa/Save button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
5. Continue with programming or press the Dir/Esc button to return to STANDBY mode.
B. Changing the Language
1. Press the Voice Mail/Menu button to enter the menu.
2. Press the 2 button or press the SCROLL DOWN button 2 time to go to the LANGUAGE
programming option.
3. Press the Flash/Edit button to change the setting. “ENGLISH” will begin flashing.
4. Press the SCROLL UP or DOWN button or number 1-3 to select between ENGLISH,
FRANCAIS, and ESPANOL.
5. W hen the desired setting is displayed, press and hold the Re/Pa/Save button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID System Operation
6. Continue with programming or press the Dir/Esc button to return to STANDBY mode.
C. Turning the FIRST RING ON or OFF
1. Press the Voice Mail/Menu button to enter the menu.
2. Press the 3 button or press the SCROLL DOWN button 3 time to go to the FIRST
RING programming option.
3. Press the Flash/Edit button to change the setting. “On” will begin flashing.
4. Press the SCROLL UP or DOWN button or number 1-3 to select between ON and
OFF..
5. When the desired setting is displayed, press and hold the Re/Pa/Save button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the Dir/Esc button to return to
STANDBY mode.
D. Setting the Time and Date
1. Press the Voice Mail/Menu button to enter the menu.
2. Press the 4 button or press the SCROLL DOWN button 4 time to go to the TIME set
programming option.
3. Press the Flash/Edit button to change the setting. The month will begin flashing.
4. Press the TELEPHONE KEYPAD 0 to 9 button to enter the month. The date will
begin flashing.
5. Press the TELEPHONE KEYPAD 0 to 9 button to enter the day. The hour will begin
flashing.
6. Press the TELEPHONE KEYPAD 0 to 9 button to enter the hour. The minutes will
begin flashing.
7. Press the TELEPHONE KEYPAD 0 to 9 button to enter the minutes. “AM” and “PM” will
begin flashing.
8. Press the TELEPHONE KEYPAD 1 button to choose AM or press the 2 button to
choose PM.
9. When the desired setting is displayed, press and hold the Re/Pa/Save button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
10. Continue with programming or press the Dir/Esc button to return to
STANDBY mode.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID System Operation
E. Adjusting the Contrast
1. Press the Voice Mail/Menu button to enter the menu.
2. Press the 5 button or press the SCROLL DOWN button 5 time to go to the CONTRAST
programming option.
3. Press the Flash/Edit button to change the setting. “4” will begin flashing.
4. Press the SCROLL UP or DOWN button or number 1-8 to select from 1 to 8 levels of
contrast.
5. When the desired setting is displayed, press and hold the Re/Pa/Save button to save
the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the Dir/Esc button to return to
STANDBY mode.
F. Setting the PBX Number
1. Press the Voice Mail/Menu button to enter the menu.
2. Press the 6 button or press the SCROLL DOWN button 6 time to go to the PBX
NUMBER programming option.
3. Press the Flash/Edit button to change the setting. “OFF” will begin flashing.
4. Press the SCROLL UP or DOWN button or number * and 0-9 to customize the digit to
match your PBX system. When not connected to a PBX, the phone will only function
normally when set to “OFF.”
5. When the desired setting is displayed, press and hold the Re/Pa/Save button to save
the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the Dir/Esc button to return to
STANDBY mode.
G. Changing the Flash Time
1. Press the Voice Mail/Menu button to enter the menu.
2. Press the 7 button or press the SCROLL DOWN button 7 time to go to the FLASH
TIME programming option.
3. Press the Flash/Edit button to change the setting. “600” will begin flashing.
4. Press the SCROLL UPor DOWN button or number 1-9 to select the desired FLASH
TIME.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID System Operation
5. When the desired setting is displayed, press and hold the Re/Pa/Save button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the Dir/Esc button to return to
STANDBY mode.
NOTE: The standard and default flash time setting is 600 msec. This is the setting you
should use to access standard telephone services such as call waiting. This setting is
adjustable to allow for PBX and other special uses.
H. Changing the Pause Time
1. Press the Voice Mail/Menu button to enter the menu.
2. Press the 8 button or press the SCROLL DOWN button 8 time to go to the PAUSE
TIME programming option.
3. Press the Flash/Edit button to change the setting. “4” will begin flashing.
4. Press the SCROLL UP or DOWN button or number 0-9 to select the desired time
delay.
5. When the desired setting is displayed, press and hold the Re/Pa/Save button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the Dir/Esc button to return to
STANDBY mode.
I. Programming One-Touch Voice Mail Dialing
1. Press the Voice Mail/Menu button to enter the menu.
2. Press the 9 button or press the SCROLL DOWN button 9 time to go to the VOICE
MAIL programming option.
3. Press the Flash/Edit button to enter the voice mail speed dial number.
4. Press the TELEPHONE KEYPAD 0 to 9 buttons to enter the phone number used to
access your voice mail messages (up to 32 digits).
5. When the desired setting is displayed, press and hold the Re/Pa/Save button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the Dir/Esc button to return to
STANDBY mode.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID System Operation
J. Deleting Message Waiting Indication
1. Press the Voice Mail/Menu button to enter the menu.
2. Press the 0 button or press the SCROLL DOWN button 10 time to go to the
MESSAGE WAITING programming option. “MSG WAITING ON” will display
in LCD
MSG WAITING
ON
#10 Total11
3. Press the Flash/Edit button to reset the Message Waiting Indication. “MSG
WAITING OFF” will be displayed in LCD and the “OFF” will flashing.
4. Press and hold the Re/Pa/Save button to delete the indication. A long “beep”
will sound to confirm the setting has been saved.
5. Continue with programming or press the Dir/Esc button to return to
STANDBY mode.
NOTE: Only Message Waiting in “ON” mode can delete the indication to “OFF” mode, if
the mode is “OFF”, no need this operation..
K. Setting the Area Code
1. Press the Voice Mail/Menu button to enter the menu.
2. Press the * button or press the SCROLL DOWN button 11 time to go to the AREA
CODE programming option.
3. Press the Flash/Edit button to change the setting. “000” will begin flashing.
4. Press the TELEPHONE KEYPAD 0 to 9 buttons to enter the three digit area
code for your phone number.
5. When the desired setting is displayed, press and hold the Re/Pa/Save button
to save the setting. A long “beep” will sound to confirm the setting has been
saved.
6. Press the Dir/Esc button to return to STANDBY mode.
NOTE:
Do not use the AREA CODE programming if you are required to dial 10 digits
(XXX-XXX-XXXX) to dial a local number.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-HANDSET System Operation
Prepare for use
If you have more than one HANDSET, you have a multi-handset system. This
system can support up to 5 HANDSETS for the BASE UNIT. The user can have
the option to add more HANDSET.
An added HANDSET comes with CHARGER, CHARGER AC ADAPTOR,
BETTERY PACK and BELT CLIP.
NOTE: USE ONLY WITH CLASS 2 POWER SOURCE
9V DC, 300mA for the BASE UNIT
9V DC, 100mA for the CHARGER UNIT
1. Install the BETTERY,CHARGER AC ADAPTOR and BELT CLIP, please see
page 9 for detail.
2. IMPORTANT: Before initial use, charges the HANDSET for 12 hours. Place the
HANDSET on the BASE UNIT or CHARGER UNIT with TELEPHONE KEYPAD
face up, and make sure that the CHARGER UNIT LED indicator lights up.
3. Rigister: place one HANDSET on the BASE UNIT(not the
RING : HI
CHARGER UNIT) for 2 to 5 seconds, a long beep will be
heard, and LCD display the ID of this HANDSET.
HS - 1
10:11 AM10/18 NEW0
Total0
4. place another HANDSET on the BASE UNIT(not the
CHARGER UNIT) for 2 to 5 seconds, a long beep will be
heard, and LCD display the ID of this HANDSET. Continue
this step until all HADNSET finish register.
RING : HI
HS - 2
10:11 AM 10/18 NEW0
Total0
5. You can charger the battery of HANDSET by place
the HANDSET to BASE UNIT or CHARGER UNIT.
Transfer Call
1. During a call , press the UP/Transfer button. The
LCD Screen of the initiating HANDSET will display
“TRANSFER HS- -”.
TRANSFER
HS - -
1min 15sec
2. Enter the ID # of the receiving HANDSET by pressing
the TELEPHONE KEYPAD “1” to “5” buttons.
TRANSFER
3. The initiating HANDSET will return to STANDBY mode.
HS - 2
10:11 AM10/18 NEW1
Total1
4. The receiving HANDSET will receive a special alerting
tone and the LCD Screen will display “TRANSFER”
5. The receiving HANDSET will answer the call by
pressing the TALK button.
6. If the receiving HANDSET does not answer the call within 30 seconds, the
initiating HANDSET will receive a Ring Back melody. The initiating HANDSET can
answer the call by pressing the TALK button within 30 seconds, or after 30
seconds the BASE UNIT will off the line automatically.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Security System
Security System
Your cordless telephone uses a digital coding security system to prevent
unauthorized use of your telephone line by another nearby cordless telephone. The
system has its own identifying signal created by microcomputers in both the BASE
UNIT and the HANDSET.
Security Code
This telephone has an internal security code with 65,536 possible combinations.
Resetting Security Code and Channel Information
Communication between the HANDSET and the BASE UNIT may not be possible in
any of the following situations:
1. Out of range;
2. Battery low;
3. HANDSET’s ID is not match with the BASE, eg.HANDSET is a new one, and it is
first time to use with this BASE.
To reset, place the HANDSET on the BASE UNIT for 2 to 5 seconds.
Multi-Channel Access
Your cordless telephone lets you select a channel from the 40 frequencies available
to transmit signals between the BASE UNIT and the HANDSET. When you notice
interference from other cordless telephones, change to another channel by pressing
the Scan/Del button on the HANDSET.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Recharging the BATTERY PACK
Recharging the BATTERY PACK
The nickel metal hydride (Ni-MH) BATTERY PACK in the HANDSET can be
recharged many times using the built-in charger in the BASE UNIT or CHARGER
UNIT.
When the BATT LOW symbol appears on the LCD Screen, a “beep” sound will be
heard every 10 seconds. This indicates that the BATTERY PACK needs to be
recharged.
Charge the BATTERY PACK at least once every 90 days of non-use to avoid battery
failure. When the BATTERY PACK can no longer be charged, replacement of the
BATTERY PACK will be necessary.
NOTES:
1. During a power interruption, the BASE UNIT does not operate, and a
phone conversation cannot be made on the HANDSET.
2. To ensure your phone charges properly, place the HANDSET on the
BASE UNIT with TELEPHONE KEYPAD face up, and make sure that the
CHARGE LED indicator on the BASE UNIT lights up and a “beep”
confirmation tone is heard.
Changing the BATTERY PACK
The BATTERY PACK provides power for the HANDSET of your cordless telephone.
To Replace the BATTERY PACK:
1. Remove the HANDSET BATTERY COMPARTMENT COVER by sliding it
down.
2. Pull out the BATTERY PACK PLUG and remove the BATTERY PACK.
3. Plug the new BATTERY PACK into the BATTERY CONNECTOR.
4. Slide the HANDSET BATTERY COMPARTMENT COVER firmly into place in
its closed position.
5. Before use, charge the new BATTERY PACK for 12 hours.
ATTENTION:
The telephone that you have purchased contains a rechargeable BATTERY
PACK. The BATTERY PACK is recyclable. At the end of its useful life, under
various state and local laws, it may be illegal to dispose of this BATTERY PACK
into the municipal waste stream. Check with your local solid waste officials for
details in your area for recycling options or proper disposal.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem Solving
Problem Solving Section
For your assistance, we have listed below a few common problems.
Phone does not work, check the following:
1. BASE UNIT is plugged into a power source.
2. HANDSET is charged.
3. TONE/PULSE Select Switch is in the right position.
4. TELEPHONE LINE CORD is plugged into the TELEPHONE JACK.
Range of phone limited, check the following:
1. BASE UNIT is centrally located in your residence.
2. BASE UNIT is not located near appliances.
No dial tone, check the following:
1. TELEPHONE LINE CORD plugs are connected to the TELEPHONE JACK and
TELEPHONE LINE CONNECTION JACK.
2. BASE UNIT is plugged into a power source.
3. If you had a power failure or had unplugged the BASE UNIT, replace the
HANDSET on the BASE UNIT for 2 to 5 seconds to reset the system.
Received signal flutters or fades, check the following:
1. BATTERY PACK in the HANDSET is fully charged.
2. HANDSET is not too far from the BASE UNIT.
Interference on reception, check the following:
1. Noise may be picked up from electrical products in the home or electrical
storms. Generally, this noise is a minor annoyance and should not be
interpreted as a defect in your system. (See Technical Information on page 34).
2. Choose an alternate channel using the Scan/Del button on the HANDSET.
3. Do not use this telephone within 20 ft. of a microwave oven while it is working,
as you may experience interference. This is a normal occurrence with 5.8 GHz
phones and should not be interpreted as a defect in the product.
Excess static, check the following:
1. Check to see that the ANTENNA is not touching another metal object.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem Solving
If after pressing the Talk button, you receive three “beeps” and no dial tone, check the
following:
1. BASE UNIT is plugged into a power source.
2. If you had a power failure or had unplugged the BASE UNIT, replace the
HANDSET on the BASE UNIT for 2 to 5 seconds to reset the system.
NOTE:
If none of the telephones in the house are working, disconnect one set at a time to
verify that none of the phones are causing the problem. If you still have a problem
after doing this, and your telephone still does not work, please contact your local
phone company.
Can not register the HANDSET, when place HANDSET to BASE UNIT not a long beep
heard but the triple beep, check as following:.
1. HANDSET is more than 5.
2. Already has a HANDSET with ID=5, and wish register a new one. In this situation,
you should reset the BASE UNIT.
3. reset the BASE UNIT: In standby mode, plug the T/P switch to the “P” position
and push and hold the PAGE button on the BASE UNIT 8 -10 seconds, the
CHAGRER LED will fast flash 1 second . After reset the BASE UNIT, place the
each HANDSET to the BASE UNIT for 2 to 5 second for register(see page 29 for
detail).
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Information
Technical Information
This cordless telephone uses radio frequencies to allow mobility. There are certain
difficulties in using radio frequencies with a cordless telephone. While these are
normal, the following could affect the operation of your system.
Noise
Electrical pulse noise is present in most homes at one time or another. This noise is
most intense during electrical storms. Certain kinds of electrical equipment such as
light dimmers, fluorescent bulbs, motors, and fans also generate noise pulses.
Because radio frequencies are susceptible to these noise pulses, you may
occasionally hear them in your HANDSET. Generally they are a minor annoyance
and should not be interpreted as a defect in your system.
Range
Because radio frequency is used, the location of the BASE UNIT can affect the
operating range. Try several locations in your home or office and pick the one that
gives you the clearest signal to the HANDSET.
Interference
Electronic circuits activate a relay to connect the cordless telephone to your
telephone line. These electronic circuits operate in the radio frequency spectrum.
While several protection circuits are used to prevent unwanted signals, there may be
periods when these unwanted signals enter the BASE UNIT. You may hear clicks or
hear the relay activate while you are not using the HANDSET. If the interference
occurs frequently, it can be minimized or eliminated by relocating the BASE UNIT.
You can check for interference before selecting the final BASE UNIT location by
plugging in the telephone.
NOTICE:
This cordless telephone uses radio communication between the HANDSET and the
BASE UNIT and may not ensure privacy of communication. Other devices, including
other cordless telephones, may interfere with the operation of this cordless telephone
or cause noise during operation. Units not containing coded access may be
accessed by other radio communication systems. Cordless telephones must not
cause interference to any licensed radio service.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Requirements
FCC NOTICE
The FCC requires that you be advised of certain requirements involving the use of
this telephone.
1. This telephone is hearing aid compatible.
2. This equipment complies with Part 68 of the FCC Rules. A label on the
BASE UNIT of this equipment contains, among other information, the ACTA
Product Number and the Ringer Equivalence Number (REN) for this
equipment. You must, upon request, provide this information to your
telephone company.
3. The REN is also useful in determining the quantity of devices that you may
connect to your telephone line and still allow these devices to ring when
your telephone number is called. In most areas, but not all, the sum of the
RENs for all devices connected to one line should not exceed five (5.0). To
be certain of the number of devices that you may connect to your line, you
should contact your local telephone company.
4. If your telephone causes harm to the telephone network, the telephone
company may temporarily disconnect your service. If possible, they will
notify you in advance that temporary discontinuance of service may be
required. However, when advanced written notice is not possible, the
telephone company may temporarily discontinue service without notice if
such action is necessary under the circumstances.
5. The telephone company may make changes in its communication facilities,
equipment, operations, or procedures that could affect the proper operation of
your equipment. If they do, you will be provided with advance notice as to
give you an opportunity to maintain uninterrupted service.
6. This equipment may not be used on coin service provided by the telephone
company. Connection to party lines is subject to state tariffs. (Contact your
state public Utility Commission or Corporation Commission for information.
7. An FCC compliant telephone cord and modular plug is provided with this
equipment. This equipment is designed to be connected to the telephone
network or premises wiring using a compatible modular jack which is Part
68 compliant. See Installation Instructions for details.
8. Please follow instructions for repairing, if repairing any (e.g. battery
replacement section), otherwise do not alter or repair any parts or device
except specified.
9. The USOC number of the registration jack for this equipment is RJ11C.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Requirements
RINGER EQUIVALENCE NUMBER
NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device
provides an indication of the maximum number of terminals allowed to be connected
to a telephone interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the sum of the ringer
equivalence numbers at all devices does not exceed 5.
CAUTION:
Users should not attempt to make such connections themselves, but should contact
the appropriate electric inspection authority, or electrician, as appropriate.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Requirements
NOTE: This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
1. Reorient or relocate the receiving ANTENNA.
2. Increase the distance between the equipment and the receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved in writing by
the user’s authority to operate this equipment.
may void
Some cordless telephones operate at frequencies that may cause interference to nearby
TVs and VCRs. To minimize or prevent such interference, the base of the cordless
phone should not be placed near or on top of a TV or VCR. If interference is
experienced, moving the cordless telephone farther away from the TV or VCR will often
reduce or eliminate the interference.
If trouble is experienced with this equipment, for repair or warranty information, please
contact service center at the below. If the equipment is causing harm to the telephone
network, the telephone company may request that you disconnect the equipment until the
problem is resolved.
Service can be obtained at:
U.S.A
C.I. Service Dept.
181 Cooper Avenue
Unit 104
Tonawanda, N.Y.
14150
AC ADAPTOR: Use only with class 2 Power Source, 9V DC output, 300mA,
center pin positive for BASE UNIT and 9V DC output, 100mA, center pin
positive for CHARGER UNIT
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT
In order to get maximum life from the HANDSET
BATTERY PACK, be sure to charge the HANDSET
for 12 hours before initial use.
IMPORTANT
Placing your BASE UNIT near appliances such as
televisions, refrigerators, radios, or microwave
ovens may cause interference.
IMPORTANT
The AC ADAPTOR must always be plugged
into an electrical outlet.
IMPORTANT
In order to utilize the Caller ID feature, you
must subscribe to Caller ID service from
your local telephone company.
IMPORTANT
If you live in an area which receives frequent
thunderstorms, we strongly recommend plugging
your AC ADAPTOR into a surge protector.
Download from Www.Somanuals.com. All Manuals Search And Download.
|