®
INSTRUCTION
BOOKLET
4-Slice Electronic Toaster
CPT-90C
CLASSIC STYLE, CHROME FINISH
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES AND
BENEFITS
1
9
8
MODEL CPT-90C
1. Wide…Long Toasting Slots:
1-3/8” Wide Toaster Slot is 10” long. Large
toasting slots hold a variety of breads, from
English Muffins, to thick homemade slices to
long slices of Italian bread. Bagels too!
Easily holds 4 regular size slices.
4
4
2
2. Slice Control Switch:
3
1
Energy Saving Switch that shuts off the
back heater when toasting only one or two
slices, to prevent overtoasting.
2
3. Browning Control:
Easy to grip rotary dial sets desired toast color
from light to dark, with six browning levels.
5
4. Extra Lift Carriage Control Lever:
Push down to lower bread into slot and start
toaster. Push up to bring toast close to the top
of the toaster, making it easy to remove smaller
foods.
11
6
5. Defrost Control:
7
Defrosts and then toasts frozen breads by
adding time to the toast cycle. LED Indicator
lights when selected.
3
6. Reheat Control:
Reheats without browning or toasting. LED
Indicator lights when selected.
7. Cancel Control:
Interrupts toasting process.
8. Always Even™ Shade Control:
Electronic control constantly monitors toaster’s
internal temperature to provide consistent toasting
results from one use to the next. Heating elements
deliver uniform heat for even browning.
10
®
9. Self-Centering Bread Racks:
Centers all shapes & sizes of bread in the middle
of toaster chamber for more even toasting results.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Slide-out Crumb Tray:
Removes easily to clean crumbs from bottom
of toaster.
4. Begin Toasting.
Press the Carriage Control Lever until it locks
into the down position. The toaster will start.
• Thickly cut pieces of bread and bagels will
take longer to toast, sometimes significantly
longer, since more moisture must be
evaporated from the bread before toasting
can occur. Very thick pieces may require
two cycles.
11. Cord Storage:
Takes up excess cord and keeps countertop
neat.
5. Select Custom Settings.
If desired, select the Defrost or Reheat Setting
after the Carriage Control Lever is pushed
down. If no special settings are selected, the
toaster will brown your toast based on the
selection you made with the browning dial.
• When toasting raisin breads, fruit breads,
or fruit muffins, remove any loose fruit, etc.
from the surface of the bread before placing
into the toaster. This will help prevent them
from falling into the toaster or sticking on the
guard wires in the slot.
USE AND CARE
Unwind the power cord. Check that the
crumb tray is in place and that there is
nothing in the toaster slot. Plug power cord
into the wall outlet.
Defrost - To defrost, then toast. Adds
time to the toast cycle for defrosting.
Reheat - For reheating pre-toasted bread.
• Before toasting bagels, slice each bagel into
two equal halves.
1. Insert slice(s) of bread.
Be sure that multiple slices do not overlap and
that the bread carriage is in the up position.
When choosing these special settings a red
LED light will come on above the selected
feature button.
• Most 4-slice toasters generate so much heat
that when 2 slices are toasted, they can be
2. Set the Browning Control.
6. To Stop Toasting.
overtoasted. By positioning the Slice Control
Turn the rotary Browning Dial to the desired
position. Toast gets darker as the dial is turned
clockwise from left to right. The Browning
Dial can be adjusted either before or after
pressing down the Carriage / Start Lever.
When the toasting cycle is finished, the toast
will be raised. If you wish to stop the cycle
before it is finished, simply press the Cancel
Button. You can also lift up the Carriage
Control Lever to stop the cycle.
2
Switch in the 1-Slice/2-Slice position
,
1
®
the Cuisinart 4-Slice Toaster generates less
heat and better toasting results.
• A single slice of toast requires less toasting
time than two slices of bread. To prevent
overtoasting of a single slice, put bread in the
Setting
1-2
Color
light
medium
dark
7. To Remove Toast.
Lift the Extra-Lift Carriage Control until it
reaches its highest point. This is especially
useful when toasting smaller breads.
front slot, set the Slice Control Switch to the
3-4
2
1-Slice/2-Slice position
1
, and set the
5-6
Browning Control to a lighter setting than you
normally would. Each chamber is designed for
2 slices of bread. By lowering the toasting time
for a single slice, your toast won’t get too
brown.
3. Set Slice Control Switch.
If toasting one or two slices, use the front slot.
Helpful Browning Notes:
Set the 2-position rocker switch to the
Toasting is a combination of cooking and
drying of the bread. Therefore, differences in
moisture level from one bread to another can
result in varying toasting times.
2
1 Slice/2 Slice
1
setting. When toasting
three or four slices, set the switch to the 3
4
Slice/4 Slice
3
position. Switch is located
Notes on Specialty Uses:
Toaster Pastries.
on the right side of the toaster above the
Defrost button.
• For slightly dry bread, use a lower setting
than you normally would.
Exercise caution with toaster pastries.
The filling can become quite hot long before
the surface of the pastry becomes browned.
A low setting should be sufficient.
Never leave toaster pastries unattended
while toasting or warming. Avoid iced
pastries. The icing can melt onto the interior
of the toaster and can burn as well.
4
2
• For very fresh bread or whole wheat bread,
use a darker setting than normal.
3
1
• Breads with very uneven surfaces (such
as English Muffins) will require a higher
browning setting.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
English Muffins & Thick Sliced
Breads.
Requires longer toasting time than regular
breads. We suggest that you increase the
darkness setting on the Browning Dial to
increase the toasting time.
Two-Slice Toasting:
CUSTOM SETTINGS
Most 4-slice toasters generate so much heat
that when 2 slices are toasted the bread can be
overtoasted. For two slices of regular size
bread, follow these steps:
Defrost Button
Long Slices of Bread.
1. Set the Slice Control Switch to the
If your bread slice is so long that a toaster
slot can only accomodate a single slice,
we suggest that you set the Browning
Control to a lighter setting than you
normally would.
2
1-Slice/2-Slice position
. This will reduce
1
the amount of heat generated and give better
toasting results.
Cancel
Reheat
Defrost
2. Put both slices of bread in the front toaster
slot. This is the slot on the side of the toaster
with the Cuisinart name on it. Putting the
Slice Control Switch in the 1-Slice/2-Slice
position turns OFF the back chamber.
The Defrost Button is designed to first
defrost and then toast the bread, by
extending the toasting cycle slightly.
Frozen Breads.
The following breads and pastries should
be defrosted and warmed using the
Defrost Button:
2
1
1. Insert slice(s) of bread:
Be sure that multiple slices do not overlap
and the carriage is in the up position.
3. Start the toaster as you normally would
(Push down the carriage control lever).
Frozen Waffles, Pancakes, French Toast
and Bagels
2. Set the Browning Control:
Select desired browning level from light
to dark with rotary browning dial.
Press the Defrost Button when defrosting
and toasting waffles, pancakes, French toast
and bagel halves. For best results use a few
toasting cycles at a low setting. A single longer
toasting time can result in waffles, pancakes or
French toast that are toasted on the outside
but cool or soggy on the inside.
Single Slice Toasting:
A single slice of toast requires less toasting
time than two slices of bread. Each chamber
is designed for 2 slices of regular size bread.
Lower the toast time for a single slice by
turning the Browning Dial to a lighter
setting. This will prevent overtoasting
the bread slice. For one slice of regular
sized bread, follow these steps:
3. Set the Slice Control Switch to
2
the 1 Slice/2 Slice
or 3 Slice/4
1
4
Slice
position, as needed.
3
4. Press the Carriage Control
Lever down until it locks into
position.
Tips:
5. Press the Defrost Button.
The LED will illuminate when this feature
is selected.
•
Never force foods into the Toasting Slot.
1. Set the Slice Control Switch to the
Foods should fit freely between the guard
(guide) wires.
1-Slice/2-Slice position
1
2 . This will turn
off the back chamber to reduce the amount
of heat generated, and give better toasting
results.
To stop cycle:
•
Do not place buttered breads or frosted
When the Defrost and Toast Cycle is
complete, the toaster will raise the bread. If
you wish to stop the cycle before it is finished,
simply press the Cancel Button to interrupt at
any time. To remove toast, lift the Extra-Lift
Carriage Control until it reaches its highest
point. This is especially useful when toasting
smaller breads.
pastries in the toaster, as it could create a fire
hazard.
2. Put the slice of bread in the front toaster
slot. This is on the side of the toaster with the
Cuisinart name on it. It is also marked with
arrows ꢀ which point to the front slot.
•
Uneven toasting is usually due to bread
slices of uneven thickness.
• Never insert hard objects into the toasting
slot.
3. Set the Browning Control to a lighter
setting than you normally would for 2 slices.
•
After use, unplug your toaster from the
4. Start the toaster as you normally would
(Push down the carriage control lever).
electrical outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
2. Do not use abrasive cleansers. Simply wipe
the exterior with a clean damp cloth and dry
thoroughly. Apply any cleansing agent to a
cloth, not to the toaster, before cleaning.
Reheat Button
3. To remove crumbs, slide out the Crumb
Tray and discard crumbs. Wipe clean and
replace. Never operate the toaster without the
Crumb Tray in place.
Cancel
Reheat
Defrost
4. To remove any pieces of bread remaining in
the toaster, turn the toaster upside down and
gently shake. Never insert any hard or sharp
instruments into the slot as this could damage
the toaster and cause a safety hazard.
The Reheat feature allows you to reheat
toasted bread without browning or toasting.
1. Insert slice(s) of bread:
Be sure that multiple slices do not overlap and
the carriage is in the up position.
5. Never wrap the cord around the outside of
the toaster. Use the cord storage cleats on the
underside of the toaster.
2. Set the Slice Control Switch to the
2
4
1 Slice/2 Slice
or 3 Slice/4 Slice
1
3
position, as needed.
FOR HOUSEHOLD
USE ONLY
3. Press the Carriage Control Lever
until it locks into position.
4. Press the Reheat Button.
You do not have to set the Browning Dial as
this cycle will not brown or toast the bread.
To stop cycle:
When the Reheat Cycle is complete, the
toaster will raise the bread. If you wish to stop
the cycle before it is finished, simply press the
Cancel Button to interrupt or lift up on the
Carriage Control Lever. To remove toast, lift
the Extra-Lift Carriage Control until it
reaches its highest point. This is especially
useful when toasting smaller breads.
CLEANING AND
MAINTENANCE
Always allow the toaster to cool completely
before cleaning.
1. Always unplug the toaster from the
electrical outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
®
parts or repair service other than those which
have been authorized by Cuisinart. This limited
warranty does not cover any damage caused by
accident, misuse, shipment or other than
ordinary household use.
CUISINART CLASSIC
STYLE TOASTER
3 YEAR LIMITED
WARRANTY
This limited warranty is available to consumers
only. You are a consumer if you own a
Cuisinart Toaster which was purchased at
retail for personal, family or household use.
This warranty is not available to retailers or
other commercial purchasers or owners.
THIS WARRANTY EXCLUDES ALL
INCIDENTAL OR CONSEQUENTIAL
DAMAGES. ALL APPLICABLE IMPLIED
WARRANTIES, INCLUDING THE
IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, GIVEN
TO YOU BY LAW, ARE HEREBY
LIMITED IN DURATION TO THIS
WARRANTY.
®
®
We warrant that your Cuisinart Toaster will
be free of defects in materials and workmanship
under normal home use for three years from
the original date of purchase.
If you have any questions about the safety
®
features of your Cuisinart Toaster, please call
We suggest you complete and return the
enclosed warranty registration card promptly.
However, return of the card is not a condition
of this warranty and does not eliminate the
need for the consumer to maintain the original
receipt of purchase.
us, toll-free, at 1-800-472-7606.
If your unit should prove to be defective within
the warranty period, we will repair or replace it
at our option, without charge to you. To obtain
warranty service, contact: Cuisinart Canada, 156
Parkshore Drive, Brampton, Ont. L6T 5M1 or
call toll-free: 1-800-472-7606.
To facilitate the speed and accuracy of your
return, please also enclose $7.00 for shipping and
handling of the product. Please be sure to
include a return address, description of the
product defect, product serial number and any
other information pertinent to the product’s
return. Please pay by cheque or money order.
© 2000 Cuisinart
®
Cuisinart is a registered trademark
of Cuisinart
®
Your Cuisinart Toaster has been
Cusisinart Canada
156 Parkshore Drive
Brampton Ont. L6T 5M1
Printed in China
IB-2696-CAN-C
97CC13523
manufactured to the strictest specifications and
has been designed for use with authorized
®
Cuisinart accessories and replacement parts.
This warranty expressly excludes any defects or
damages caused by accessories, replacement
7
Download from Www.Somanuals.com. All Manuals Search And Download.
|