INSTRUCTION
BOOKLET
Recipe
Booklet
Reverse Side
SmartPower® Deluxe™ 600-Watt Blender
SPB-600
For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL CORD SET
INSTRUCTIONS
TABLE OF CONTENTS
Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . 2
Unpacking Instructions . . . . . . . . . . . . . . . . . . . . . . . . 3
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . 4
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Helpful Reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Cleaning and Maintenance . . . . . . . . . . . . . . . . . . . . . 6
DOs and DON’Ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Quick Reference Guide (recipe booklet) . . . . . . . . . . . 3
NOTICE
For your protection, this unit is
equipped with a 3-conductor cord
set that has a molded 3-prong
grounding-type plug, and should
be used in combination with a
properly connected grounding-
type outlet as shown in Figure A.
NOTE: Do not remove the grounding prong.
CAUTION: Before using an adapter, it must be
determined that the outlet cover plate screw is
properly grounded. If in doubt, consult a licensed
electrician. Never use an adapter unless you are
sure it is properly grounded.
Note: Use of an adapter is not permitted in
Canada.
UNPACKING INSTRUCTIONS
1. Place the gift box containing your Cuisinart®
SmartPower® Deluxe™ 600-Watt Blender on a flat,
sturdy surface before unpacking.
2. Remove instruction booklet and other printed
materials from top of corrugated insert. Next
remove the top corrugated insert.
3. Carefully lift blender base from box and set aside.
4. Remove the lower corrugated insert containing the
blender jar assembly. Be careful not to tip the jar
when removing.
To assemble the blender, follow the Assembly
Instructions on page 4 in this instruction booklet.
Replace all corrugated inserts in the box and save the
box for repackaging.
Before using for the first time: Wash all parts
according to the Cleaning and Maintenance section on
page 6 of this booklet to remove any dust or residue.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Heavy-duty Motor Base
FEATURES AND BENEFITS
Is so sturdy and stable, it will not “walk” on your
counter – even during ice crushing!
1. Cover
2.
Just press on.
Tightfitting seal
resists leakage.
1.
9. Slip-proof Feet
Prevent movement during use and prevent
damaging marks on countertops or tables.
2. Measured
10. Cord Storage (not shown)
Keeps countertop safe and neat by conveniently
storing excess cord.
3.
5.
Pour Lid
Allows you to
measure and
add ingredients
without removing
the cover.
ASSEMBLY
To use your Cuisinart® SmartPower® Deluxe™ 600-Watt
Blender, begin by assembling the blender jar.
6.
7.
3. 48-oz. Glass Jar
Has a unique,
1. Turn the blender jar (a)
upside down, and place it
sturdy, wide-
mouth design.
d.
flat on a sturdy surface.
8.
9.
2. Position the rubber gasket
4. Leak-proof
Rubber Gasket
(not shown)
c.
(b) on the round opening on
the bottom of the blender
jar.
Holds the glass
jar snugly in
position for safe
operation.
3. Turn the cutting assembly
Note: Blades are sharp.
Handle carefully.
b.
(c) upside down, and place
the blade end in the blender
jar opening.
a.
5. High-quality Cutting Assembly with Patented
Stainless Steel Blades
Note: Blades are sharp.
Handle carefully.
Is strong enough for all blending tasks, including
tough jobs like crushing ice.
4. Secure the rubber gasket and cutting assembly
into position by placing the smaller opening of the
locking ring (d) on top of the cutting assembly.
Engage threads by twisting the locking ring
clockwise until tightened. Make sure locking ring
is tightly fastened to blender jar. Once assembled,
turn the blender jar right-side up.
6. Locking Ring
Is self-aligning so that the glass blender jar slides
easily into position.
7. Electronic Touchpad Controls
a. On/Off Button
Turns blender on or off.
5. Push the cover onto the top of the blender jar.
Push the measured pour lid into the cover.
b. High Button
Choose High speed to blend ingredients to
the desired consistency. Blue LED lights will
indicate which speed you are using.
6. Place the blender jar on the motor base so that
the jar markings are facing you and the handle is
positioned to one side.
c. Low Button
7. Plug in power cord. Your blender is now ready to
be used.
Choose Low speed to blend ingredients to
the desired consistency. Blue LED lights will
indicate which speed you are using.
HELPFUL REMINDERS
d. Ice Crush Button
Press Ice Crush and begin crushing. This button
is the best speed for crushing ice.
•
Once the cover is in position, additional ingredients
can be added during blending by simply lifting
the measured pour lid, adding ingredients, and
replacing the measured pour lid.
e. Pulse Button
Allows you to pulse at High, Low or Ice Crush
speeds, so you can blend ingredients only as
much as needed.
•
•
Cover should always be in place while the unit is on.
Warning: Do not place blender jar on base while
motor is running.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
•
Do not twist locking ring from blender jar when
removing blender jar from base. Simply lift blender
jar from motor base.
without pressing the On/Off button, by simply
pushing another speed button.
WARNING: FLASHING RED LIGHT INDICATES
READY TO OPERATE. DO NOT TOUCH BLADES.
Boiling liquids or solid frozen foods (with the
exception of ice cubes or ½-inch [1.3 cm] pieces of
frozen fruit) should never be put into the blender jar.
5. To reset the unit: This appliance features an
advanced resettable thermal fuse. In the event
of an overload condition, the unit will shut down
to protect the motor from overheating. To reset
the appliance when this happens, unplug the unit
and let it cool for a minimum of 15 minutes. Then,
reduce the contents of the blender jar and/or clear
any jams. Restart the unit as noted in the operating
directions.
Do not put ice, frozen foods or very cold liquids
into a blender jar that has come directly from a hot
dishwasher.
Do not put very hot liquids or foods into a blender
jar that has come directly from the freezer. Boiling
liquids should cool for 5 minutes before being
poured into blender jar.
6. To pause or stop blending process:
•
Follow Cleaning and Maintenance instructions on
page 6, prior to your first use.
a. To pause blending process:
Push the button corresponding to the speed at
which you are currently blending. For example:
If you are blending on High speed, push the
High speed button and the blender will stop
blending but the unit will remain on.
OPERATION
1. Place the motor base of your Cuisinart®
SmartPower® Deluxe™ 600-Watt Blender on a flat,
sturdy surface. It is important that the surface
be clean and dry. Assemble the blender by
following the Assembly Instructions. Once the jar
is assembled and is in position on the motor base,
plug the unit into an electrical outlet.
b. To stop blending process:
Push the On/Off button when you are finished
with your recipe and would like to turn the
blender off.
c. To prevent excessive stress to the motor:
Your blender incorporates an auto-stop feature.
After running continuously for two minutes, the
blender will automatically revert to Standby
mode. To continue blending, press the desired
function.
2. Put all necessary ingredients into the blender jar and
replace the cover. You may add more ingredients
by lifting the measured pour lid and dropping
ingredients through the fill area. Replace the
measured pour lid after adding ingredients. Do not
put hands into blender jar with blender plugged in.
7. Pulse mode: The Pulse mode allows you to create
a burst of power for quick, efficient blending. To
use the Pulse function, push the On/Off button and
the red LED indicator light will illuminate. Push the
Pulse button and the Pulse LED indicator light will
blink. Push and release the desired speed button.
Repeat as desired. You determine the duration of
each pulse. While pulsing, the LED indicator light will
glow. The Pulse function can be used to break apart
larger pieces of food or to control the texture of food
when chopping. The Pulse function is also effective in
starting the blending process when you do not want
continuous power, or when processing items that do
not require an extended amount of blending.
8. To crush ice: The SmartPower® Deluxe™ 600-
Watt Blender motor is strong enough to crush
ice without liquid at any speed; however, for your
convenience, we have preset the best speed for
ice crushing. To crush ice, place ice cubes in
the blender jar. Press the On/Off button. The On
indicator light will illuminate. Press the Ice Crush
button until ice is crushed to desired consistency.
Note: Add liquid ingredients first, then follow with
solid ingredients. This will provide more consistent
blending and prevent unnecessary stress on the
motor.
Note: To remove blender jar cover, lift edge of
cover upward. Lifting measured pour lid will not
remove cover.
3. Start blending:
Press the On/Off button. The red LED indicator light
will illuminate and
flash, indicating
that the blender is
turned on but no
speed has been
selected.
4. Choose blending speed: Press High, Low or Ice
Crush buttons to determine the speed at which
you would like to blend the ingredients. Both the
On indicator light and the activated speed indicator
lights will glow. The blender will now be functioning
at the desired speed. It is possible to switch speeds
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Ice Crush can also be used in Pulse mode. See
carefully disassemble parts. Wash cutting assembly,
Recipe Tips section on page 2 of the recipe booklet gasket and locking ring in warm, soapy water. Rinse
for more details.
and dry all parts thoroughly.
9. To dislodge food: Use a rubber or plastic spatula
to help remove food lodged around the cutting
assembly. Do not use spatula until you have turned
the blender off. Replace the cover and measured
pour lid and continue blending, if necessary.
Make sure spatula is not inside the blender jar
before blending.
DOs and DON’Ts
WHEN USING YOUR BLENDER
DO:
•
Make sure the electrical outlet is rated at the same
voltage as that stated on the bottom of the blender
motor base.
10. When finished blending: Press the On/Off button
and unplug the blender from the electrical outlet.
Never remove the blender jar from the motor base
until the blender is off. Do not twist locking ring from
blender jar when removing jar from motor base.
Simply lift blender jar from motor base. Do not put
hands into blender jar with blender plugged in.
•
•
Always use the blender on a clean, sturdy and dry
surface.
Always add liquid ingredients to the blender jar
first, then add remaining ingredients. This will
ensure that ingredients are uniformly mixed.
•
Cut most foods into cubes approximately ½ inch
(1.3 cm) to 1 inch (2.5 cm) to achieve a more
uniform result. Cut all cheeses into pieces no
larger than ½ inch (1.3 cm).
CLEANING AND MAINTENANCE
Always unplug your Cuisinart® SmartPower® Deluxe™
600-Watt Blender from the electrical outlet before
cleaning. The blender is made of corrosion-resistant
parts that are easy to clean. Before first use and after
every use, clean each part thoroughly. Periodically
check all parts before reassembly. If any part is
damaged or blender jar is chipped or cracked, DO
NOT USE BLENDER.
•
•
Use the measured pour lid to measure liquid
ingredients such as alcohol. Replace measured
pour lid after ingredients have been added.
Use a rubber or plastic spatula as needed, only
when the blender is turned off. Never use metal
utensils, as damage may occur to the blender jar
or cutting assembly.
Remove the blender jar from the motor base by lifting
straight up and away. Twist off the locking ring by
turning counterclockwise.
•
•
•
•
Place cover on firmly. Always operate the blender
with the cover on.
Remove the cutting assembly and rubber gasket.
Wash in warm soapy water, rinse, and dry thoroughly.
Make sure locking ring is tightly attached to
blender jar.
Place the locking ring in the upper rack of the
dishwasher or wash in warm water.
Always remove locking ring, cutting assembly, and
rubber gasket before cleaning.
CAUTION: Handle the cutting assembly carefully. It is
SHARP and may cause injury. Do not attempt to remove
blades from cutting assembly.
When scraping the blender jar with a spatula,
remove the food from the sides of the blender jar
and place food in the center of the blender jar,
over the cutting assembly.
Remove the blender jar cover and the measured
pour lid. Wash in warm, soapy water; rinse and dry
thoroughly, or place in upper rack of dishwasher. The
blender jar must be washed in warm, soapy water and
rinsed and dried thoroughly. The blender jar can also
be placed upside down in dishwasher.
•
When chopping fresh herbs, garlic, onion, zest,
bread crumbs, nuts, spices, etc., make sure the
blender jar and cutting assembly are completely
dry.
Finally, wipe the motor base clean with a damp cloth
to remove any residue, and dry thoroughly. Never
submerge the motor base in water or other liquid, or
place in a dishwasher.
•
•
If food tends to stick to the sides of the blender jar
when blending, pulse in short bursts.
Pulses should be short bursts. Space the pulses
so the blades stop rotating between pulses.
Tip: You may wish to clean your blender cutting
assembly as follows: Squirt a small amount of
dishwashing liquid into assembled blender jar and fill
halfway with warm water. Run on Low for 15 seconds.
Repeat, using clean tap water. Empty blender jar and
6
Download from Www.Somanuals.com. All Manuals Search And Download.
DON’T:
WARRANTY
•
Don’t store food or liquids in your blender jar.
•
Don’t place cutting assembly and locking ring on
motor base without the blender jar attached.
LIMITED THREE-YEAR
•
•
•
Don’t attempt to mash potatoes, knead heavy
dough, or beat egg whites.
WARRANTY
This warranty supersedes all previous warranties
on the Cuisinart® SmartPower® Deluxe™ 600-Watt
Blender. This warranty is available to consumers
only. You are a consumer if you own a Cuisinart®
SmartPower® Deluxe™ 600-Watt Blender that was
purchased at retail for personal, family, or household
use. Except as otherwise required under applicable
state law, this warranty is not available to retailers or
other commercial purchasers or owners. We warrant
that your Cuisinart® SmartPower® Deluxe™ 600-
Watt Blender will be free of defects in material or
workmanship under normal home use for three years
from the date of original purchase.
Don’t remove blender jar while unit is on. Keep the
blender jar cover on the blender jar while blending.
Don’t twist locking ring from blender jar when
removing blender jar from motor base. Simply lift
blender jar from motor base.
•
•
Don’t overprocess foods. Blender will achieve
most desired results in seconds, not minutes.
Don’t overload blender. If the motor stalls, turn
the blender off immediately, unplug the unit and
remove a portion of the food, then continue.
•
•
Don’t use any utensil inside the blender jar while
the motor is on.
We recommend that you visit our website,
www.cuisinart.com for a fast, efficient way to complete
your product registration. However, product registration
does not eliminate the need for the consumer to maintain
the original proof of purchase in order to obtain the
warranty benefits. In the event that you do not have proof
of purchase date, the purchase date for purposes of this
warranty will be the date of manufacture.
Don’t use any container or accessories not
recommended by Cuisinart. Doing so may result
in injury.
•
•
Don’t put hands inside the blender jar when
blender is plugged in.
Don’t add boiling liquids or frozen foods (except
ice cubes or ½-inch pieces of frozen fruit) to glass
blender jar. Boiling liquids should cool for
If your blender should prove to be defective within
the warranty period, we will repair it or, if we think
it necessary, replace it. To obtain warranty service,
please call our Consumer Service Center toll-free at
1-800-726-0190 or write to: Cuisinart, 7811 North Glen
Harbor Blvd., Glendale, AZ 85307.
5 minutes before being poured into blender jar.
•
Don’t run blender when jar is empty.
To facilitate the speed and accuracy of your return,
please enclose $10.00 for shipping and handling of
the product. Be sure to include a return address,
daytime phone number, description of the product
defect, product serial number (stamped on bottom of
product base), and any other information pertinent to
the product’s return. Please pay by check or money
order. (California residents need only supply proof of
purchase and should call 1-800-726-0190 for shipping
instructions).
NOTE: For added protection and secure handling
of any Cuisinart product that is being returned, we
recommend you use a traceable, insured delivery
service. Cuisinart cannot be held responsible for
in-transit damage or for packages that are not
delivered to us. Lost and/or damaged products are not
covered under warranty.
Your Cuisinart® SmartPower® Deluxe™ 600-Watt
Blender has been manufactured to strict specifications
and has been designed for use with the Cuisinart®
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SmartPower® Deluxe™ 600-Watt Blender accessories
and replacement parts. These warranties expressly
exclude any defects or damages caused by
serviced with the correct parts, and to ensure that the
product is still under warranty.
accessories, replacement parts, or repair service other
than those that have been authorized by Cuisinart.
These warranties do not cover any damage caused
by accident, misuse, shipment, or other than ordinary
household use. These warranties exclude all incidental
or consequential damages. Some states do not
allow the exclusion of or limitation of incidental or
consequential damages, so the foregoing limitation
may not apply to you.
CALIFORNIA RESIDENTS ONLY
California law provides that for In-Warranty Service,
California residents have the option of returning a
nonconforming product (A) to the store where it was
purchased or (B) to another retail store that sells
Cuisinart products of the same type. The retail store
shall then, according to its preferences, either repair
the product, refer the consumer to an independent
repair facility, replace the product, or refund the
purchase price less the amount directly attributable
to the consumer’s prior usage of the product. If
either of the above two options does not result in the
appropriate relief to the consumer, the consumer may
then take the product to an independent repair facility
if service or repair can be economically accomplished.
Cuisinart and not the consumer will be responsible
for the reasonable cost of such service, repair,
replacement, or refund for nonconforming products
under warranty.
California residents may also, at their preference,
return nonconforming products directly to Cuisinart
for repair or, if necessary, replacement by calling our
Consumer Service Center toll-free at 1-800-726-0190.
Cuisinart will be responsible for the cost of the repair,
replacement, and shipping and handling for such
nonconforming products under warranty.
BEFORE RETURNING YOUR CUISINART PRODUCT
If you are experiencing problems with your Cuisinart
product, we suggest that you call our Consumer
Service Center at 1-800-726-0190 before returning the
product for servicing. Often, our Consumer Service
Representatives can help solve the problem without
having the product serviced. If servicing is needed,
a Representative can confirm whether the product is
under warranty and direct you to the nearest service
location.
©2010 Cuisinart
150 Milford Road
East Windsor, NJ 08520
Printed in China
Important: If the nonconforming product is to be
serviced by someone other than Cuisinart’s Authorized
Service Center, please remind the servicer to call our
Consumer Service Center at 1-800-726-0190 to ensure
that the problem is properly diagnosed, the product is
10CE114302
N IB-9578B
8
Download from Www.Somanuals.com. All Manuals Search And Download.
|