®
INST RUCT ION
BOOKLET
SMART ST ICK™ EXT ENDIBLE SHAFT HAND BLENDER
CSB-55
Download from Www.Somanuals.com. All Manuals Search And Download.
Cuisinart Repair Center for examination, repair, mechanical or electrical
adjustment.
TABLE OF CONT ENT S:
Important Safeguards..................................................................................pg. 2
Introduction.................................................................................................pg. 3
Features and Benefits ..................................................................................pg. 4
Before You Begin.........................................................................................pg. 6
Hand Blender Assembly..............................................................................pg. 6
Shaft Length Adjustment............................................................................pg. 7
Hand Blender Operation ............................................................................pg. 8
Helpful Hints...............................................................................................pg. 9
Attachments.................................................................................................pg.10
Storage Stand for Countertop Use.............................................................pg.11
Storage Stand for Wall Mount ...................................................................pg.12
Chopper Grinder Parts and Assembly........................................................pg.13
Chopper Grinder Tips for Processing Food..............................................pg.16
Processing Foods.........................................................................................pg.18
Cleaning.......................................................................................................pg.20
SmartStick™ Hand Blender ....................................................................pg.20
SmartStick™ Mini Prep® Chopper Grinder Attachment ......................pg.20
Recipe Suggestions......................................................................................pg.21
Warranty......................................................................................................pg.27
Template for Wall Mount Storage..............................................................pg.28
8. Remove detachable shaft from the blender before washing the blades
or shaft.
9. Blades are SHARP. Handle carefully when removing, inserting
or cleaning.
10. When mixing liquids, especially hot liquids, use a tall container or make
small quantities at a time to reduce spillage, splattering and possibility of
injury from burning.
11. To reduce the risk of injury, never place chopper grinder attachment cut-
ting blade on base without first putting prep bowl properly in place.
12. Be certain the chopper grinder attachment cover is securely locked in
place before operating appliance. Do not attempt to remove cover until
blade has stopped rotating.
13. Check prep bowl for presence of foreign objects before using.
14. The use of attachments or accessories not recommended by Cuisinart
may cause fire, electrical shock, or risk of injury.
15. Do not use outdoors.
16. Do not let any cord hang over the edge of the table or counter. Do not
let cord contact hot surfaces, including stovetop.
IMPORTANT SAFEGUARDS
17. Make sure the appliance is “off”, the motor has stopped completely, and
the appliance is unplugged from outlet before putting on or taking off
attachments, and before cleaning.
When using an electrical appliance, basic safety precautions should always be
followed including the following:
1. READ ALL INST RUCT IONS.
18. To reduce the risk of fire or electric shock, do not operate any heating
appliance beneath the mounting unit.
2. To protect against electrical shock, do not put the motor body, cord or
electrical plug of this Hand Blender in water or other liquid. The drive
shaft of this appliance, where blades are interchanged, has been designed
for submersion in water or other liquids. Never submerge any other
portion of this unit. If Hand Blender falls into liquid, remove immediately.
Do not reach into the liquid without unplugging the unit first.
19. Do not mount the storage bracket/ unit over or near any portion of a
heating or cooking appliance or a sink or basin.
SAVE T H ESE INST RUCT IONS
FOR H OUSEH OLD USE ONLY
NOT ICE
This appliance has a polarized plug (one blade is wider than the other). As a
safety feature, this plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician. Do not attempt to defeat this safety feature.
3. This appliance should not be used by children. To avoid possible acciden-
tal injury, close supervision is necessary when any appliance is used by or
near children.
4. Unplug from outlet when not in use, before putting on or taking
off parts, and before cleaning. To unplug, grasp plug and pull from
electrical outlet. Never pull cord.
5. Avoid contacting moving parts.
6. During operation keep hands, hair, clothing, as well as spatulas and other
utensils away from attachments and any mixing container to reduce risk
of injury to persons, and/or damage to the appliance. A spatula may be
used, but must be used only when the unit is not operating.
INT RODUCT ION
Get to the bottom of Great Cooking!
The SmartStick™ Extendable Shaft adjusts to your needs. With the
SmartStick™ Extendable Shaft Hand Blender you can comfortably blend
long, tall pots of hot soup and great sauces without getting your hands messy
or your sleeves stained. And, since the handle is above the rim you won’t be
straining to reach the bottom of that steaming pot.
7. Do not operate any appliance with a damaged cord or plug or after the
appliance has malfunctioned or has been dropped or damaged in any way
or is not operating properly. Return the appliance to the nearest
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Two Stages Snap Together Easily:
Not only is the SmartStick™ Hand Blender a great kitchen tool for hot
foods, it’s great for stirring and freshening entire pitchers of cold drinks like
icy lemonade, refreshing iced tea, pulpy orange juice, tomato juice or fruit
smoothies. Milk Shakes too!
Disassemble for compact storage separately or together in storage stand.
a. Motor Body with Control Handle:
Contains powerful AC motor. Variable 4-speed control and one step
ON/OFF button located on top of handle.
The Extendable Shaft easily adjusts up to two inches! Simply rotate the
adjustment ring on the shaft, pull the shaft to the length you want, and then
tighten the ring.
b. Detachable Shaft with Adjustable Shaft Length:
Easy to use, easy to clean and easy to store. Detach from motor body by pressing
release button. Rinse under faucet or put in top shelf of dishwasher to clean.
Adjust shaft length with adjustment ring.
Inspired by great chefs and their restaurant tools, we bring to your home a true
innovation in Hand Blenders. Armed with a powerful motor and heavy-duty
blade, the SmartStick™ Hand Blender lets you whip potatoes, blend diet drinks
and milk shakes, chop cooked vegetables, and purée fruits. Add the whipping
disc, and you can make whipped cream, mayonnaise, egg whites and milk
drinks too.
2. One Step ON/OFF (Power) Button:
Press and hold the rubberized power button to operate blender. Release button to
stop motor.
3. 4-Speed Slide Control:
Located on top of handle, lever easily slides from left to right to increase speed.
4. Extendable Blending Shaft (patent pending):
Shaft extends an extra 2 inches. Easily reaches the bottom of tall pot or
pitcher while keeping your hands clean and safe.
The natural grip lets you hold this Hand Blender much like a stirring utensil, so
it’s comfortable and natural. The rubber grip gives you a great hold if your hands
are wet, and four distinct speeds give you precise control. With the ON/OFF
button on the top you can control the SmartStick™ Hand Blender with your
thumb. And, the cord is designed to get out of your way while you cook.
5. Shaft Length Adjustment Ring:
Adjust shaft length by turning this ring to the left (counterclockwise), then
pulling shaft to the desired length. Always tighten ring before use by turning
to the right (clockwise).
®
By adding the SmartStick™ Mini Prep Chopper Grinder Attachment you
6. Maximum Comfort Handle:
can prepare an entire meal.
The Hand Blender handle and power button are designed around the way you
actually hold a stirring utensil. The shape of this handle gives you comfortable
control and easy access to the power button. Rubberized handle gives better
grip, especially when your hands are wet.
Cuisinart, the company that invented food processors, brings many years of
expertise to this chopper grinder attachment. Simply remove the detachable
shaft from the SmartStick™ Hand Blender, using the convenient release but-
®
ton. Then attach the SmartStick™ Mini Prep Chopper Grinder Attachment.
7. Detachable Blending Blade:
Blade can be detached from shaft to replace with the whipping disc, or for
cleaning. Blade can also be cleaned without detaching.
You’re ready to go.
8. Detachable Whipping Disc:
Detach blade and replace with this disc for whipping cream and creating other
delectables.
FEAT URES AND BENEFIT S
MODEL CSB-55
11
9. Easy-To-Clean:
3
13
The Smartstick™ Extendable Shaft Hand Blender has a smooth surface that
wipes clean instantly and easily. Detachable shaft is dishwasher safe.
2
3
2
2
3
4
1
1a
6
10. Mixing Beaker, dishwasher & microwave safe:
See-thru Mixing Beaker is marked in liters and cups for convenient measuring.
Use for drinks, shakes, salad dressings, etc. Designed for easy gripping and
drip-free pouring.
®
®
TM
SmartStick
TM
SmartStick
EXTENDABLE
SHAFT
EXTENDABLE
SHAFT
PRESS BUTTON TO DETACH
12
PRESS BUTTON TO DETACH
®
Use only this piece for wall mounting.
Connect to other half for countertop storage.
Motor
Body
®
®
®
TM
™
SmartStick
SmartStick
™
SmartStick
MINI PREP®
MINI PREP®
Chopper Grinder Attachment
Chopper Grinder Attachment
11. Convenient Storage:
EXTENDABLE
SHAFT
Shaft
Storage stand is made of two pieces. One side holds the detachable shaft. The
other holds the motor body with control handle. The 2 storage pieces snap
together for compact countertop storage. To hang the Hand Blender from the
wall bracket, detach and mount one to the wall and hang the entire appliance as
shown. Use anchor and screws included with this appliance.
Release
Button
PRESS BUTTON TO DETACH
4
T
R
I
T
O
L
C
5
1b
8
®
12. SmartStick™ Mini Prep Chopper Grinder Attachment:
T
R
I
T
O
L
10
OZ
16
CUPS
2
2
500ml
450
3
Chop, mince & grind with the Cuisinart Chopper Grinder attachment.
Attaches to blender motor body in place of the blender shaft.
1
4
1
/
4
12/3
12 11/2
10 11/4
400
350
7
11/3
8
1
1
300
250
3
6
/4
2
/3
®
4
11/2
200
1
/3
TM
SmartStick
1
/4
2
150
100
50
EXTENDABLE
SHAFT
13. Reversible Chopper Grinder Blade:
Choose best direction depending on task. One direction is sharp. The other
direction is blunt.
PRESS BUTTON TO DETACH
®
DISHWASHER AND MICROWAVE SAFE
11
®
Connect to other half for countertop storage.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
SH AFT LENGT H ADJUST MENT
Place the package containing the Cuisinart SmartStick™ Extendable Shaft
Hand Blender on a sturdy surface. Unpack the SmartStick™ from its box by
removing the upper protective insert. Gently slide the unit from the box.
Remove all support materials from the box and replace the upper insert. Save
packaging for possible repacking of the unit.
Your SmartStick™ Extendable Shaft Hand Blender has a shaft that extends up
to 2 additional inches. This feature was developed with two major benefits in
mind. One benefit is that you can mix and blend in tall pots, pitchers, glasses
or other mixing containers. This makes the SmartStick™ Hand Blender
more useful than other Hand Blenders.
Note: T he blending blade is extremely sharp. Use caution when
removing and unpacking the storage stand. T he blending blade is
stored in the storage stand.
The second goal is comfort. You may find that using this appliance is more
comfortable to hold with the shaft extended, even if you do not require the
longer shaft for blending.
®
Before using the Cuisinart SmartStick™ Extendable Shaft Hand Blender for
T
R
I
T
O
L
the first time, we recommend that you wipe the unit with a clean, damp cloth
to remove any dirt or dust. Dry it thoroughly with a soft absorbent cloth.
Handle carefully; wash each individual blade attachment, mixing container
and detachable shaft by hand or in the dishwasher. Dry thoroughly before
use. Read all instructions completely for detailed operating procedures.
T
R
I
T
O
L
H AND BLENDER ASSEMBLY
Note: To avoid possibility of personal injury always be sure to unplug
the power cord from electrical wall socket before attaching or removing
blades and/or attachments.
A. Attach blade or whipping disc to blender shaft.
For your safety, always detach the shaft from motor body.
To insert the blade or whipping disc, hold the stem of the blade/disc
between your fingers. Match the raised notches on the shaft to the open
slots on the stem.
Making the Shaft Longer.
It will be easier to adjust the shaft length when it is attached to the Hand
Blender. Follow these steps to adjust:
Once properly aligned, slide the blade/disc onto the stem and push
firmly into position. To ensure that the blade/disc is securely in place,
carefully press the center end of each attachment back toward the shaft.
1. Hold the SmartStick™ Hand Blender firmly with both hands.
Hold the main body securely in one hand.
2. With the other hand rotate the Shaft Adjustment Ring to the left
(counterclockwise) to loosen the shaft. This will be about a one quarter
turn. Do not overturn.
It is important to properly secure the blade/disc to prevent separation
during use. Do not begin operating Cuisinart SmartStick™ Hand
Blender until the desired blade/disc is secured!
3. Extend the shaft to the desired length by pulling on the lower end of the
shaft. The shaft can be adjusted up to 2 inches. When you have reached
the maximum possible length of the shaft, you will feel resistance. Do not
pull any further.
A
B. Attach detachable
blender shaft to
motor control body.
TM
4. When you have located the most desirable length, rotate the Shaft
Adjustment Ring to the right (clockwise) to tighten the shaft. Do not over-
tighten as you may damage the threads on the shaft.
SmartStick
Align blender shaft with the
EXTENDABLE
SHAFT
motor body as shown in
PRESS BUTTON TO DETACH
illustration. Slide the pieces
together till you hear and
5. You are ready to use the SmartStick™ Hand Blender with shaft extended.
I
L
feel the pieces click together.
It may be helpful to
Note: After blending, rinse the shaft including the extended segment.
press the release button
when assembling.
B
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips:
3. Adjust Shaft Length.
Only adjust if longer shaft length is needed for tall pots or pitchers.
1. Immediately after blending, rinse the entire shaft before mixtures dry. This
See Shaft Length Adjustment, page 7.
will make the unit easier to clean.
4. ON
OFF
2. Clean by running under faucet, or putting in top shelf of dishwasher.
2. Speed Adjustment Lever
Making the Shaft Shorter.
1. Rotate the Shaft Adjustment Ring to the left (counterclockwise) to loosen
the shaft. This will be about a one quarter turn. Do not overturn.
2 3
4
1
2. Retract the shaft to the desired length by pushing on the lower end of the
shaft. Do not grab the blender blade.
3. When the shaft is totally retracted, rotate the Shaft Adjustment Ring to
the right to tighten the shaft. Do not over tighten or you may damage the
threads on the shaft.
Press for ON
Release for OFF
®
®
TM
TM
SmartStick
SmartStick
EXTENDABLE
SHAFT
EXTENDABLE
SHAFT
Rotate to left
to loosen
Rotate to right
to tighten
PRESS BUTTON TO DETACH
PRESS BUTTON TO DETACH
4. Press and hold ON/OFF switch to turn appliance ON.
The SmartStick™ Hand Blender will continue to run as long as the
switch is pressed in. To turn Hand Blender off, release ON/OFF switch
and the motor will stop.
T
R
I
T
R
I
T
O
L
T
O
L
®
TM
SmartStick
EXTENDABLE
SHAFT
®
5. Unplug immediately after use.
T
R
I
TM
T
O
L
SmartStick
PRESS BUTTON TO DETACH
EXTENDABLE
SHAFT
T
RI
TO
L
PRESS BUTTON TO DETACH
H elpful H ints.
pull
T
R
I
T
O
L
1. Cut most solid foods into 1/2" cubes for easy blending. Suggestion: use
Chopper Grinder for chopping and grinding solid foods.
Shaft Length
Adjustment
Ring
2. Pour liquid ingredients into the mixing container first unless recipe
instructs otherwise.
3. To avoid splashing, do not pull the Hand Blender out of the mixture while
it is running.
Grasp here
and pull
to extend
4. Do not let Hand Blender stand in a hot pot on stove while not in use.
5. To prevent splashing, don’t turn the Hand Blender on until the blade is
beneath the surface of the mixture.
H AND BLENDER OPERAT ION
6. Do not put fruit pits, bones, or other hard material into the blending
mixture as these are liable to damage the blades.
Turning SmartStick™ Extendable Shaft Hand Blender ON/OFF:
Keep hands, hair, clothing, and other utensils away from blending blade.
1. Plug electrical cord into an electrical wall socket.
7. Do not fill mixing containers too full. The level of mixture will rise when
blending and can overflow.
If a wall switch controls current to the socket, be sure the switch is ON.
8. Adding liquids that are warm, not cold, facilitates blending solids with
liquids.
2. Adjust Speed Setting.
Rotate the Speed Setting Lever clockwise to increase speed, counter-
clockwise to decrease speed. Speeds increase from left to right with
Speed 1 being the slowest, and Speed 4 the fastest.
9. For recipes calling for ice, use crushed ice (not whole cubes) for best
results.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Use Speeds 1 and 2 for whipping with the whipping disc.
AT TACH MENT S:
(A) BLENDING / MIXING / CH OPPING / MINCING BLADE
The Whipping attachment is specially designed to add air and volume to
mixtures. Perfect for aerating egg whites and cream, this attachment adds
air that makes mixtures light, frothy and thick.
When using this attachment, make sure there is extra room in the mixing
container for the recipe to grow! For most recipes such as mayonnaise,
beaten egg whites and whipped cream, hold the end of the SmartStick™
Hand Blender in the bottom of the container and turn it on for about
15 seconds. Then continue to process, gently lifting the Hand Blender
almost to the top of the liquid until the mixture is thick.
Always use Speeds 3 and 4 when blending, mixing, chopping and puréeing
with the metal blade.
Blending & Mixing.
The specially designed blade is for mixing and stirring all kinds of foods,
including salad dressings, powdered drink products, and sauces. It is ideal for
combining dry ingredients, and can be used to emulsify mayonnaise too.
ST ORAGE STAND / WALL BRACKET S
The SmartStick™ Extendable Shaft Hand Blender includes a two part
storage stand that can be assembled into a single piece for countertop use.
You can also separate the stand into two pieces, and mount one of the pieces
on your wall to use as a wall storage bracket.
This blade mixes and stirs while adding only a minimum of air to your mixture.
A gentle up-and-down motion is all you need to make the most flavorful, full-
®
bodied liquid recipes. Be careful never to remove the Cuisinart SmartStick™
Storage stand kit consists of six (6) pieces: two anchor bolts, two plastic wall
anchors, and two storage pieces that can fit together for countertop use or
separate for wall mount.
Extendable Shaft Hand Blender from the liquid while in operation.
Chopping & Mixing.
This blade also chops and purées cooked fruits, vegetables, baby foods, and
cooked meats/poultry. To chop or mince, always cut food into uniform pieces
Countertop Option.
®
of 1/2" to ensure perfect results. Keep the Cuisinart SmartStick™
The two storage pieces fit together. (See diagram below).
Extendable Shaft Hand Blender directly over the food being processed, while
placing a free hand on the mixing container for support. You may wish to
place your free hand over the top of the container to prevent chopped ingre-
dients from escaping. Use a forceful up-and-down motion when chopping
and blending. This allows the blade to process the food more efficiently.
1
NOT E: If a piece of food becomes lodged in the guard surrounding the
blade, follow the safety instructions below:
3
T
RI
TO
L
C
1. Release the power button and unplug the electrical cord from the
wall socket.
2
®
TM
SmartStick
EXTENDABLE
SHAFT
2. After the power source is disconnected, use a spatula to carefully remove
the food lodged in the guard. Avoid injury. Do not use your fingers to
remove lodged objects.
PRESS BUTTON TO DETACH
®
Connect to other half for countertop storage.
3. After the lodged food has been removed you may plug the electrical cord
into the wall socket and continue blending.
Align the two pieces back to back on a flat surface, with the ring shaped
reservoirs facing right and left. The raised walls should be in the middle. Lift
up the right piece, align the two tabs in the back with the two slots of the left
piece. Gently slide the tabs into the slots until both pieces are resting flat on
the countertop.
NOT E: The maximum rating is based on the Blending Blade attachment
that draw the greatest load (power or current) and that other recommended
attachments may draw significantly less power or current.
(B) WH IPPING DISC AT TACH MENT
To store SmartStick™ Hand Blender, detach the shaft and place the bottom
part (blade guard) into one of the reservoirs. Place the motor body (right side
up) into the other reservoir. You should be able to read the SmartStick™
logo, when the motor body is in the stand.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Mini Chopper Grinder Storage.
The counter storage unit can be placed in a cupboard or on a shelf if not on
the counter.
®
The SmartStick™ Mini Prep Chopper Grinder Attachment stores neatly on
the countertop in a minimum of space. Store the unit assembled to prevent loss
of parts. Store the blades as you would sharp knives—out of reach of children.
Wall Mount Option
Separate the two plastic storage stand pieces. You will need only one for wall
mount. (See diagrams below). The unit you must use is the section that has
the round storage hole to hold the whipping disk.
Chopper Grinder Parts and Assembly
E
A. Chopper Grinder
F
F
Prep Bowl
B. Cover Slots (3)
for Attaching
Cover
G
G
N
M
L
C. Metal Blade
Assembly Shaft
D. Rubber Feet
E. Blade Assembly
F. Blade Ring
G. Plastic Blade
Sheath
K
Wall
Anchor
Bolt
Anchor
J
When selecting a mounting location, be sure to leave enough room above the
storage stand for your hand to remove the SmartStick™ Hand Blender. Also be
sure to leave enough room below the stand to allow the appliance to hang freely.
E
®
H
™
SmartStick
MINI PREP®
Chopper Grinder Attachment
H. Chopper Grinder
Cover
I
B
A
I. Lift Tabs
G
J. Chopper Grinder
Spline
You will need to drill two holes 2 5/8" apart from each other, measured from
the center of each hole. To assist in proper location of holes for the mounting
screws, remove the wall mount template from this instruction book. Place the
template over the back of the wall unit, aligning the outline of the template
with the wall bracket. When you have done this, place the template and wall
bracket against the wall in the desired location. Remove the wall bracket,
leaving the template in place. Mark the wall with a pencil in the locations for
screw holes indicated by the template. Remove the template.
K. Central Hub
Holding Ribs
L. Curved Sharp
Edge
C
F
M. Flat Blunt Edge
N. Ridges for
Gripping
D
With a drill, make a 3/16" starter hole for each screw. Place the plastic
anchor in each hole. Push completely into the hole with fingers, or tap in
gently with a hammer. Screw a mounting screw into each hole leaving 1/8" to
1/4" of the head and screw exposed.
®
TM
SmartStick
EXTENDABLE
SHAFT
PRESS BUTTON TO DETACH
®
™
SmartStick
®
MINI PREP®
Chopper Grinder Attachment
™
SmartStick
MINI PREP®
Chopper Grinder Attachment
Position the two mounting holes of the wall bracket over the screw heads and
slide wall bracket down the wall until the bracket is resting against the screw
head, and will not slide any further. If the wall bracket feels too
loose against the wall, remove bracket, put screws further into
wall and replace bracket.
Reversible Blade.
®
The Cuisinart SmartStick™ Mini Prep Chopper Grinder attachment is
equipped with a reversible blade. This blade is sharp on one side and blunt
on the other. The blade is attached to a plastic ring which slides over the
blade assembly shaft, so it can be easily turned over to select the appropriate
blade. A guide for proper blade selection follows in the section, Chopper
Grinder Tips for Processing Foods.
®
TM
SmartStick
EXTENDABLE
SHAFT
PRESS BUTTON TO DETACH
®
Use only this piece for wall mounting.
Connect to other half for countertop storage.
Place the assembled SmartStick™ Hand Blender into the wall
bracket. The unit will hang from the bracket, held in place by
the motor body width.
Before you process any food, assemble the parts.
1. Place the Prep Bowl on a flat, dry, stable surface. It should be close to an
electrical outlet of the same voltage as stated on the rating plate on the
SmartStick™ Hand Blender.
To reduce the risk of fire or electric shock, do not operate any
heating appliance beneath the mounting unit.
Do not mount the storage bracket/ unit over or near any portion of a heating
or cooking appliance or a sink or basin.
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
2. The metal blade assembly shaft is attached to the bottom of the Prep
Bowl. If not already in place, slide the fully assembled Blade Assembly over
the top of the blade assembly shaft.
of the Plastic Blade Sheath. Let the Blade Ring slide down to the bot-
tom of the Plastic Blade Sheath. The lower blade should almost touch
the bottom of the Prep Bowl.
Lift the Prep Bowl, holding it firmly from the bottom. Pick up the Blade
Ring by its hub holding ribs (grips) and turn it very slightly clockwise.
This locks it in place on the Plastic Blade Sheath and prevents it from
sliding up during processing.
2a. Putting together the Blade Assembly:
Connect the Blade Ring (F) to the Plastic Blade Sheath (G). Line up the
blade ring opening with the plastic sheath. Let the blade ring slide to the
bottom of the plastic sheath. HOLD THE BLADE RING BY THE
CENTRAL HUB HOLDING RIBS (grips)(K) ONLY. DO NOT
TOUCH THE RAZOR SHARP BLADES.
3. Connect the SmartStick™ Hand Blender
Motor Body to the top of the Chopper
Grinder Attachment Cover. Align the spline
in the Chopper Grinder Cover’s drive shaft
with the ribbed opening on the underside of
the motor body. When aligned properly, slide
the two pieces together until they mate. You
will feel and hear a slight click. It may be
helpful to press the rubber release button
when sliding these pieces together.
3
2a
F
Motor
Body Bottom
and Chopper
Grinder
®
K
TM
SmartStick
EXTENDABLE
SHAFT
N
Cover Top
View
PRESS BUTTON TO DETACH
G
4. With the Hand Blender in place, locate the
Chopper Grinder cover and place it on top of
the prep bowl.
Note these important features of the Blade Ring. The Blade Ring can be
placed over the Plastic Blade Sheath in two different ways:
®
™
SmartStick
MINI PREP®
Chopper Grinder Attachment
If you hold it this way (A), you will see the word “Sharp” on the blade.
Assemble the blade this side up to use the sharp edge. (see the section on
processing food for information about when to use the sharp edge.)
4a. Be sure that the 3 ridges at the top of the
Blade Assembly line up with the 3-arm
propeller gear in the underside of the chopper grinder cover, and that
the cover is seated all around the top of the prep bowl.
SHARP SIDE
A.
4b.To properly seat the cover you must line up the three molded pins from
the cover with the 3 slots at the top of the Prep Bowl. Rotate cover
counterclockwise to secure it to the prep bowl. Rotate the cover until
the pins are in the far left position in the slots.
If you hold it this way (B), you will see no writing on the blade. Assemble
the blade this side up to use the blunt edge. (See the section on processing
food for information about when to use the blunt edge.)
4
®
TM
SmartStick
EXTENDABLE
SHAFT
®
4b
TM
SmartStick
B.
EXTENDABLE
SHAFT
PRESS BUTTON TO DETACH
Inside View
of Chopper
PRESS BUTTON TO DETACH
®
Grinder
™
SmartStick
MINI PREP®
Cover
Chopper Grinder Attachment
®
®
™
SmartStick
TM
MINI PREP®
SmartStick
Chopper Grinder Attachment
BLUNT SIDE UP
4a
EXTENDABLE
SHAFT
There are notches (C) on opposite sides of the interior of the hub. These
fit over ridges on the sides of the Plastic Blade Sheath.
PRESS BUTTON TO DETACH
Notch
®
C.
™
SmartStick
MINI PREP®
Chopper Grinder Attachment
Pick up the Blade Ring by its hub holding ribs (grips) and line up the
notches in the interior of the Blade Ring hub with the ridges on the sides
Inside View
of Prep Bowl
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Pulse action:
5. Plug the power cord of the SmartStick™ Hand Blender into an electrical
outlet.
Use pulse action to prevent overprocessing. To coarsely chop, two or three
pulses are often enough. Be sure to check the food frequently to prevent
overprocessing.
6. Place one hand on the cover of the Chopper Grinder attachment while grip-
ping the SmartStick™ Hand Blender motor body handle with the other.
Select the appropriate speed on the speed control, then press the ON/OFF
button with your thumb to start the motor and run the chopper grinder. To
turn the unit off, remove your thumb from the ON/OFF button.
Continuous-hold action:
Continuous-hold action is best when you want to finely chop or mince food.
For some very hard foods, it is best to pulse several times and then run
continuously to reach the desired consistency.
7. WH EN T H E BLADE ST OPS MOVING, unplug the SmartStick™
Hand Blender, remove the motor body from the chopper grinder cover,
and remove the cover from the Prep Bowl.
When you operate the unit for more than 10 seconds, use a pulse action
every 10 seconds or so to allow food to drop to the bottom of the Prep Bowl.
This provides more consistent results.
8. Disassembling the Blade Assembly Lift the Plastic Blade Sheath.
Holding the Blade Ring stationary (using the Central Hub Holding Ribs)
carefully turn the Plastic Sheath clockwise, then guide the Blade Ring up
over the Plastic Sheath.
Never operate the Chopper Grinder continuously for longer than 1
minute at a time.
Note: The Prep Bowl may become scratched when you use it for grinding
coffee, grain and spices. This does not affect the performance of the
®
CH OPPER GRINDER T IPS for
PROCESSING FOOD
Preparing the Food
SmartStick™ Mini Prep Chopper Grinder.
Adding Liquid:
You cannot add liquids such as water, oil or flavoring while the machine is
running. You will need to stop the Hand Blender, remove the lid, add liquid
and then replace the lid before continuing to process.
Size:
Always cut food into pieces of even size - about 1/4 to 1/2 inch (6-12mm) to
a side. If you don’t start with pieces that are small and uniform, you will not
get an even chop.
Removing Food from the Sides of the Bowl:
Occasionally food will stick to the sides of the bowl as you process. Stop the
machine to clear it away. AFT ER T H E BLADE H AS ST OPPED
MOVING, remove the cover, and use a small spatula to scrape the food
from the sides of the bowl back into the center.
Quantity:
Do not overload the Prep Bowl. Overloading causes inconsistent results
and it strains the motor. Use the quantities given in the chart on page 19
as a guide.
Reversing the Blade in the Middle of a Processing Task:
While preparing some recipes, you may want to switch the blade from sharp
to blunt or vice versa.
Selecting the Right Blade Edge:
Use the sharp edge for chopping, puréeing and mixing. It is the right choice,
for example, for chopping soft, fragile food such as herbs, celery, onions,
garlic, nuts, chocolate and most cheeses. It is also the right choice for
puréeing cooked vegetables and mixing salad dressing.
1. Unplug the SmartStick™ Hand Blender.
2. Remove the Hand Blender Motor Body from the Chopper Grinder
Attachment.
3. Remove the cover from the Prep Bowl.
For some foods, use the blunt edge. Try the sharp blade first. If not satisfied
with results, try the blunt blade for grinding coffee beans and spices, and for
chopping hard food such as peppercorns and seeds.
4. Lift the Plastic Sheath by its gripping ridges and remove the Blade
Assembly. NEVER T OUCH T H E BLADE IT SELF.
Selecting the Right Operating Speed:
5. Remove the contents of the bowl to another container.
Always use Speed 4 with the Chopper Grinder.
6. Carefully remove the Blade Ring, holding it by its Central Hub Holding
Ribs. Turn blade upside down and reinsert it on the Sheath.
Note: Due to the powerful motor provided with this unit, Cuisinart recom-
mends using both hands to support the SmartStick™ Mini Prep Chopper
Grinder during operation. Place one hand on the SmartStick™ Hand
Blender control handle to operate the unit. With the other hand, grasp the
round top of the Chopper Grinder attachment and apply downward pressure
on the entire unit to prevent it from moving.
®
7. Insert the Plastic Sheath over the central opening of the empty bowl.
8. Insert the food to be processed.
9. Replace the cover, locking it into place.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Connect the Hand Blender motor body to the Chopper Grinder
Attachment.
Operating Techniques:
Chop, grind, and purée small amounts of food with the SmartStick™ Mini
11. Plug the SmartStick™ Hand Blender into the electrical outlet and
continue processing.
®
Prep Chopper Grinder attachment. This table lists a number of ingredients in
alphabetical order, and shows the recommended method of processing for each.
Speed 3 or Speed 4 should always be used with the Chopper Grinder
Attachment. Use the sharp blade for most chopping tasks.
Processing Food
1. Place the Prep Bowl firmly on a flat sturdy surface like a countertop. Be
sure the blade is assembled using the blade edge that is appropriate for
the food to be processed.
Frequent uses for Chopper Grinder
Ingredient
Comments
2. Place food in the Prep Bowl. Be sure the food is cut in small pieces, and
the bowl is not overloaded.
3. Place the Chopper Grinder cover on top of the prep bowl. Be sure the
cover is properly seated.
carrots, uncooked
celery
1/2 cup in 1/2" pieces
1/2 cup in 1/2" pieces, remove strings
4. Select Speed 4 on the SmartStick™ Hand Blender Speed Control.
5. Press the ON/OFF button on the SmartStick™ Hand Blender Speed
cheese (hard)
grate no more than 1 ounce
at a time, cut into 1/4" pieces
Control to run the Chopper Grinder.
Note: Due to the powerful motor provided with this unit, Cuisinart
recommends using one hand to support the Chopper Grinder
during operation.
bread crumbs
chocolate
1/2 cup day old bread in 1/2" pieces
grate no more than 1 ounce at a time, break into 4 pieces,
chill in freezer for 3 minutes before chopping
6. When you have finished processing the food, stop the machine by taking
your thumb or finger off the ON/OFF button.
7. WH EN T H E BLADE ST OPS MOVING, remove the SmartStick™
Hand Blender motor body from the Chopper Grinder cover, and remove
the cover from the Chopper Grinder.
garlic
1 clove, peeled; mince up to 3-4 cloves
1/2 ounce (about a 1" piece), cut into 1/4" pieces
1/2 cup, must be clean and dry
1/2 cup, shells removed
ginger root
herbs, fresh
nuts
8. Unplug the unit.
9. Carefully remove the Blade Assembly, holding it by the gripping ridges
on the Plastic Sheath. NEVER T OUCH T H E BLADE IT SELF.
10. Remove food with the spatula.
onion
1/2 cup in 1/2" pieces
Note: Do not operate the SmartStick™ Chopper Grinder attachment
without food contents in the Prep Bowl.
vegetables-cooked
vegetables-uncooked
1/2 cup in 1/2" pieces
1/2 cup in 1/2" pieces
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
RECIPE SUGGEST IONS
Sauces/Soups
CLEANING:
Smartstick™ H and Blender
LENTIL VEGETABLE SOUP
Always clean the SmartStick™ Extendable Shaft Hand Blender
thoroughly after using.
Lentil and tomato flavors combine as they simmer together to create a rich,
hearty soup.
Remove the shaft with the blade from the motor body. The shaft with the
blade and the mixing/measuring beaker can be cleaned in the dishwasher, or
by hand in hot water with a mild detergent. It is not necessary to remove the
blade from the shaft.
Makes 6 quarts (about 24 8-ounce servings)
1/2
8
4
4
4
9
4
2
cup olive oil
medium celery ribs, peeled, cut into 1" pieces
medium carrots, peeled, cut into 1" pieces
medium onions, peeled, cut into 1" pieces
medium red bell peppers, cored, cut into 1" pieces
cups water
Clean the motor body with a sponge or damp cloth only. Do not use abrasive
cleansers which could scratch the surface.
Never immerse the motor body in water.
When the appliance has malfunctioned or has been dropped or damaged in
any way or it is not operating properly, return the appliance to the nearest
Cuisinart Repair Center for examination, repair, mechanical or electrical
adjustment.
28-ounce cans plum tomatoes, drained
cups lentils
4
1
tablespoons red wine vinegar
tablespoon chili powder
Pepper and salt to taste
Suggestion: When processing foods with color (like carrots), the plastic parts
of the appliance can become discolored. Wipe these parts with cooking oil
before cleaning them with a mild detergent.
SmartStick™ Mini Prep® Chopper Grinder
2
cups coarsely chopped parsley
Attachment
Heat oil in a large stockpot over medium-high heat. Add celery, carrots,
onions and peppers; cover and cook, stirring often, until soft, about 10
minutes. Add water, tomatoes, lentils, vinegar, chili powder, pepper and salt.
Increase heat to high. Cover and bring to the boil. Reduce heat to low and
simmer, partially covered, stirring occasionally, until lentils are tender, about
30-35 minutes. Insert the SmartStick™ Extendable Shaft Hand Blender fit-
ted with the metal blade. Set on Speed 4 and blend until puréed, about 2-1/2
minutes. Stir in parsley.
To simplify cleaning, rinse the Prep Bowl, cover and blade immediately after
use, so that food won’t dry onto them. Wash Blade Ring, Plastic Sheath, and
Prep Bowl in warm soapy water. Rinse and dry. Wipe the underside of the
Chopper Grinder cover with a sponge or damp cloth to remove any food. Do
not submerge the cover in water or place in the dishwasher. Wash the blade
carefully. Avoid leaving it in soapy water where it may disappear from sight.
If you have a dishwasher, you can wash the Prep Bowl Blade Assembly on the
upper shelf. Insert the Prep Bowl upside down. Put the blade in the
cutlery basket. Unload the dishwasher carefully to avoid contact with the
sharp blade. Wipe the motor body and top of the cover with a damp sponge
or cloth. Dry it immediately. Never submerge the motor body or the cover in
water or other liquid.
Soup may be frozen in an airtight container for later use.
Nutritional information per serving:
Calories 218 (25% from fat) • carbo. 32g • prot. 9g • fat 6g • sat. fat 1g • chol. 0mg
sod. 292mg
®
The SmartStick™ Mini Prep Chopper Grinder attachment is intended for
HOUSEHOLD USE ONLY. Any service, other than cleaning and normal
user maintenance, should be performed by an authorized Cuisinart Service
Representative.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
FRESH TOMATO - ZUCCHINI BISQUE
QUICK CUISINART TOMATO SAUCE
Our basic recipe. Add your own special ingredients to create a signature sauce.
Makes 3-3/4 quarts (about 30 4-ounce servings)
This light bisque is highlighted with green and white flecks of shredded
zucchini.
Makes 2-1/2 quarts (about 10 8-ounce servings)
2
tablespoons olive oil
3
1
1
4
3
3
2
tablespoons olive oil
large garlic clove, peeled
large onion, peeled, cut into 1" pieces
cups low sodium beef broth
pounds tomatoes, stems removed, cut into 1" pieces
tablespoons tomato paste
teaspoons sugar
Black pepper and salt to taste
cup half and half
large zucchini, shredded
tablespoons chopped parsley
tablespoons chopped fresh marjoram
10
5
shallots, peeled, coarsely chopped
28-ounce cans whole tomatoes, drained
2-1/2 teaspoons dried oregano
2-1/2 teaspoons sugar
2
teaspoons salt
Heat oil in a stockpot over medium heat. Add shallots and sauté until
translucent, about 2 - 3 minutes. Add tomatoes and remaining ingredients;
reduce heat to low. Cover and simmer, stirring occasionally, until thick, about
25 - 30 minutes. Insert the SmartStick™ Extendable Shaft Hand Blender
fitted with the metal blade. Process on Speed 4 until smooth, about
1-1/2 minutes. If a chunkier texture is desired, process for about 1 minute.
3/4
1
4
2
Nutritional information per serving:
Calories 41 (22% from fat) • carbo. 7g • prot. 1g • fat 1g • sat. fat 0g • chol. 0mg
sod. 169mg
Heat oil in a large stockpot over medium heat. Add garlic and onion; sauté
until tender but not browned, about 4 - 6 minutes. Add broth, tomatoes,
tomato paste, sugar, pepper and salt. Increase heat to high and bring to a
boil; reduce heat to medium and cook, partially covered, until tomatoes are
tender, about 20 minutes.
BUTTERNUT - PEAR SOUP
A truly impressive combination of flavors plus lovely color and texture
distinguish this soup.
Insert the SmartStick™ Extendable Shaft Hand Blender fitted with the metal
blade and process on Speed 4 until well combined, about 35-45 seconds. Add
half and half; blend until just combined, about 10 seconds. Bring to a simmer
over medium heat. Add zucchini, parsley and marjoram and gently cook until
just tender, about 2 - 4 minutes.
Makes 3 quarts (about 12 8-ounce servings)
2
3
2
2
medium leeks
tablespoons butter
medium carrots, peeled, cut into 1" pieces
medium celery ribs, peeled, cut into 1" pieces
Nutritional information per serving:
Calories 127(50% from fat) • carbo. 12g • prot. 4g • fat 7g • sat. fat 2g • chol. 7mg
sod. 54mg
2-1/2 pounds butternut squash, peeled, seeded, cut into 1" pieces
1-1/2 pounds Bartlett pears, peeled, cored, cut into 1" pieces
6
cups low fat reduced sodium chicken broth
Bouquet garni (bay leaf, sprig thyme, parsley sprigtie
together in cheese cloth)
2/3
1/4
1/4
cup half and half
teaspoon cayenne pepper
teaspoon nutmeg
Pepper and salt to taste
Trim leeks at root end and 1" above white; slit lengthwise and rinse well
under cold running water. Cut into 1" pieces.
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
STRAWBERRY COCKTAILS
Place butter in a stockpot and melt over medium heat. Add leeks, carrots and
celery; sauté until softened but not browned, about 6-8 minutes, stirring
occasionally. Add squash, pears, broth and bouquet garni. Increase heat to
high; cover and bring to a boil. Reduce heat to low and simmer, partially
covered, until vegetables are tender, about 20 minutes. Insert the
SmartStick™ Extendable Shaft Hand Blender fitted with the metal blade.
Set to Speed 4 and process until smooth, about 1-1/2 minutes. Add half
and half, cayenne pepper, nutmeg, pepper and salt. Blend on Speed 4 until
combined, about 15 seconds. Serve warm.
This strawberry-banana cocktail is similar to a frozen daiquiri. For a
creamy nonalcoholic version, substitute whole milk for the rum.
Makes 3-1/2 cups (about 7 4-ounce servings)
1
1
4
4
1
12-ounce bag frozen unsweetened strawberries, thawed
medium banana, peeled, cut into 1" pieces
tablespoons superfine sugar
tablespoons freshly squeezed lime juice
cup light rum
Nutritional information per serving:
Calories 145 (31% from fat) • carbo. 21g • prot. 4g • fat 5g • sat. fat 3g • chol. 13mg
sod. 210mg
Crushed ice
Place first 5 ingredients (not ice) in a tall pitcher (about 1-1/2 quart capacity).
Insert the SmartStick™ Extendable Shaft Hand Blender fitted with the metal
blade. Set on Speed 4 and blend with a gentle up-and-down motion until
combined, about 20 seconds. Pour into glasses filled with crushed ice and
garnish with whole fresh strawberries, if desired.
Beverages
Nutritional information per serving:
Calories 122 (0% from fat) • carbo. 13g • prot. 0g • fat 0g • sat. fat 0g • chol. 0mg
sod. 2mg
CARIBE PUNCH
Apricot nectar and citrus juices mellow with rum to make a delectable, tart
refresher.
CUISINART BLOODY MARYS
Makes 1 quart (about 6 5-ounce servings)
This spicy, cool and refreshing drink is delicious for brunch or an outdoor
summer party.
1
1
cup apricot nectar, chilled
cup orange juice, chilled
Makes 1 quart (about 6 5-ounce servings)
1
cup pineapple juice, chilled
cup dark rum
cup freshly squeezed lime juice (about 3 medium limes)
tablespoon grenadine syrup
small limes, thinly sliced
3/4
1/4
1
2
1
3
cups tomato juice
2
2
1/2
1/4
5
tablespoons fresh lemon juice
teaspoons Worcestershire sauce
teaspoon garlic powder
teaspoon black pepper
drops Tabasco sauce
cup Vodka
small orange, thinly sliced
Put first 6 ingredients in a tall pitcher (about 1-1/2 quart capacity). Insert the
SmartStick™ Extendable Shaft Hand Blender fitted with the metal blade. Set
on Speed 4 and process with a gentle up-and-down motion until frothy,
about 10 seconds. Add sliced fruit and serve over ice.
3/4
Fresh cilantro sprigs
Fresh celery ribs
Place first 7 (not cilantro or celery) ingredients into a tall pitcher (about 1-
1/2 quart capacity). Insert the SmartStick™ Extendable Shaft Hand Blender
fitted with the metal blade. Set on Speed 4 and process with a gentle up-and-
down motion until combined, about 10 seconds. Add vodka and process to
mix, about 5 seconds. Pour into glasses filled with ice; garnish with cilantro
and celery.
Nutritional information per serving:
Calories 160 • (0% from fat) • carbo. 32g • prot. 1g • fat 0g • sat. fat 0g • chol. 0mg
sod. 3mg
Nutritional information per serving:
Calories 91 (0% from fat) • carbo. 6g • prot. 1g • fat 0g • sat. fat 0g • chol. 0mg
sod. 437mg
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Desserts
FOR H OUSEH OLD USE ONLY
SWEETENED WHIPPED CREAM
CUISINART ® SMART ST ICK™ EXT ENDABLE SH AFT
H AND BLENDER 3-YEAR LIMIT ED WARRANT Y
Whip cream to a fluffy consistency in seconds.
Makes 1-1/2 cups whipped cream
This limited warranty is available to consumers only. You are a consumer if
1
2
cup whipping cream*
teaspoons sugar
®
you own a Cuisinart SmartStick™ Extendable Shaft Hand Blender which
was purchased at retail for personal, family or household use. Except as oth-
erwise required under applicable state law, this warranty is not available to
retailers or other commercial purchasers or owners.
1/2
teaspoon vanilla extract
Place all ingredients in Mixing Beaker. Place the SmartStick™ Extendable
Shaft Hand Blender fitted with the Whipping Disc, into the Beaker. Set on
Speed 2, turn the Hand Blender ON and run for 10 seconds. Then use a
gentle up-and-down motion to whip the cream until thickened, about 55-60
seconds.
®
We warrant that your Cuisinart SmartStick™ Extendable Shaft Hand
Blender will be free of defects in materials and workmanship under normal
home use for three years from the original date of purchase.
We suggest you complete and return the enclosed warranty registration card
promptly. However, return of the card is not a condition of this warranty and
does not eliminate the need for the consumer to maintain the original receipt
of purchase.
*You may substitute heavy cream
Nutritional information per tablespoon:
Calories 40 (90% from fat) • carbo. 1g • prot. 0g • fat 4g • sat. fat 3g • chol. 16mg
sod. 4mg
If your unit should prove to be defective within the warranty period, we will
repair or replace it at our option without charge to you. To obtain warranty
service, simply send the defective product to: Cuisinart, 150 Milford Road.,
E. Windsor, NJ 08520 or call toll-free 800-726-0190.
To facilitate the speed and accuracy of your return, please also enclose $7.00
for shipping and handling of the product. CA residents need only provide
proof of purchase. Please be sure to include a return address, description of
the product defect, product serial number and any other information
pertinent to the product’s return. Please pay by check or money order.
®
Your Cuisinart SmartStick™ Extendable Shaft Hand Blender has been man-
ufactured to the strictest specifications and has been designed for use with
®
authorized Cuisinart accessories and replacement parts. This warranty
expressly excludes any defects or damages caused by accessories, replacement
parts or repair service other than those which have been authorized by
Cuisinart. This limited warranty does not cover any damage caused by
accident, misuse, shipment or other than ordinary household use.
THIS WARRANTY EXCLUDES ALL INCIDENTAL OR CONSE-
QUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF THESE DAMAGES, SO THESE
EXCLUSIONS MAY NOT APPLY TO YOU. ALL APPLICABLE
IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, GIVEN TO YOU BY LAW ARE HEREBY LIMITED IN
DURATION TO THIS WARRANTY. This warranty gives you specific
legal rights and you may have other rights which vary from state to state.
®
If you have any questions about the safety features of your Cuisinart
SmartStick™ Extendable Shaft Hand Blender, please call us, toll-free,
at 800-726-0190.
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
COFFEE
MAKERS
FOOD
PROCESSORS
T OAST ERS
H AN D
M IXERS
BLENDERS
COOKWARE
ICE CREAM
MAKERS
Cuisinart offers an extensive assortment of top quality products to make life in the
kitchen easier than ever. Try some of our other countertop appliances and
TM
cookware, and you’ll see why we are Your Kitchen Resource
.
©2000 Cuisinart
Cuisinart® is a registered trademark of Cuisinart
150 Milford Road
East Windsor, NJ 08520
Printed in China
99CU13009
IB-3028D
28Download from Www.Somanuals.com. All Manuals Search And Download.
|